Production of polyhydroxyalkanoates (PHAs) from waste materials and by-products by submerged and solid-state fermentation

Enhanced mechanical and functional properties of chitosan/polyvinyl alcohol/hydroxypropyl methylcellulose/alizarin composite film by incorporating cinnamon essential oil and tea polyphenols

In this study, cinnamon essential oil and tea polyphenols were added to chitosan/ polyvinyl alcohol/ hydroxypropyl methylcellulose/ alizarin composite films to enhance their mechanical and functional properties. Their addition to the composite films enhanced their antibacterial and antioxidant properties and significantly improved its elongation at break (p < 0.05). Cinnamon essential oil reduced the water vapor permeability, water content, and water solubility of composite films and improved their transparency. The composite films with additive exhibited excellent UV-barrier ability and pH responsivity. Fourier Transform infrared spectroscopy and X-Ray Diffraction analyses confirmed hydrogen bond formation between the polymer molecules and additives. The results of Scanning Electron Microscope-Focused Ion Beam revealed improved surface and cross-section morphology of the films, leading to the generation of a cross-linked structure. Thermogravimetric and differential scanning calorimetry analysis indicated enhanced thermal stability of the composite films upon cinnamon essential oil addition. Analysis of storage quality indicators (TBARS value, TVC, and TVB-N) revealed that the composite films could prolong the freshness of surimi. The incorporation of cinnamon essential oil and tea polyphenols into the composite films has demonstrated significant potential as an effective and natural alternative for active food packaging.

Application of the solid-state fermentation process and its variations in PHA production: a review

Solid-state fermentation (SSF) is a type of fermentation process with potential to use agro-industrial by-products as a carbon source. Nonetheless, there are few studies evaluating SSF compared to submerged fermentation (SmF) to produce polyhydroxyalkanoates (PHAs). Different methodologies are available associating the two processes. In general, the studies employ a 1st step by SSF to hydrolyze the agro-industrial by-products used as a carbon source, and a 2nd step to produce PHA that can be carried out by SmF or SSF. This paper reviewed and compared the different methodologies described in the literature to assess their potential for use in PHA production. The studies evaluated showed that highest PHA yields (86.2% and 82.3%) were achieved by associating SSF and SmF by Cupriavidus necator. Meanwhile, in methodologies using only SSF, Bacillus produced the highest yields (62% and 56.8%). Since PHA (%) does not necessarily represent a higher production by biomass, the productivity parameter was also compared between studies. We observed that the highest productivity results did not necessarily represent the highest PHA (%). C. necator presented the highest PHA yields associating SSF and SmF, however, is not the most suitable microorganism for PHA production by SSF. Concomitant use of C. necator and Bacillus is suggested for future studies in SSF. Also, it discusses the lack of studies on the association of the two fermentation methodologies, and on the scaling of SSF process for PHA production. In addition to demonstrating the need for standardization of results, for comparison between different methodologies.

Evaluation of different nutrient limitation strategies for the efficient production of poly(hydroxybutyrate-co-hydroxyvalerate) from waste frying oil and propionic acid in high cell density fermentations of Cupriavidus necator H16

Because of its application potential and biodegradability, poly(3-hydroxybutyrate-co-3-hydroxyvalerate;PHBV), a member of the polyhydroxyalkanoates (PHA) biopolymer family, is one of the most extensively studied PHA. High PHBV productivity with a significant amount of hydroxyvalerate (HV) content is very appealing for commercial scale production. The goal of this study was to investigate the efficiency of various defined limitation strategies, namely nitrogen, phosphorus, and oxygen-limitation, for high yield PHBV production by Cupriavidus necator H16 with increased HV unit using waste frying vegetable oil (WFO) and propionic acid (PA) in a high cell density culture (5 L bioreactor). With optimized WFO and PA feeding, highest PHBV harvest (121.7 ± 2.59 g/L; HV 13.9 ± 0.44% (w/w)) and volumetric productivity (2.03 ± 0.04 gPHBV/L·h) were obtained in oxygen-limited operation, while highest HV content (19.8 ± 0.28 wt%) and yield coefficient (0.43 ± 0.017 gHV/gPA) were observed during phosphorus-limited cultivation. Although nitrogen limitation is widely applied in the production of PHA, nitrogen-limited cultivation had the lowest cell dry matter, PHBV production, volumetric productivity, oil-to-HB and PA-to-HV yield coefficients for the given conditions. The results of the present study demonstrate the highest PHBV yield together with the highest HV content using WFO as main carbon source and PA as the HV precursor ever reported in the literature.

Facile fabrication of transparent high-barrier poly(lactic acid)-based bilayer films with antioxidant/antimicrobial performances

Poly(lactic acid) (PLA) has been intended as an encouraging biopolymer for packaging purposes. Nevertheless, PLA-based films suffer from low gas barrier properties, which restrict their applications. Here, we report a facile fabrication of multi-component coating via layer deposition of cinnamaldehyde (CIN)-doped chitosan/poly(vinyl alcohol)/fish gelatin (CPF) on PLA surfaces. Different PLA/CPF ratios (100:0, 77.5:22.5, 55:45, 32.5:67.5, and 0:100) were tested, whereas the PLA55:CPF45 was selected for loading of CIN. The surface and morphology analyses of the bilayers verify that CPF layers are successfully coated on the PLA surfaces. This design improved the mechanical strength and water barrier of CPF films and simultaneously enhanced the ductility of PLA films. By deposition of CIN-doped CPF layer on a PLA substrate, the oxygen permeability decreased from 28.92 to 0.238 cm³ mm/m² day bar, approximately 122 times lower than that of bare PLA. CIN loadings in the CPF layer endowed bilayer films with antioxidant/antimicrobial activity.

Identification of New Natural Sources of Flavour and Aroma Metabolites from Solid-State Fermentation of Agro-Industrial By-Products

Increasing consumer demand for natural flavours and fragrances has driven up prices and increased pressure on natural resources. A shift in consumer preference towards more sustainable and economical sources of these natural additives and away from synthetic production has encouraged research into alternative supplies of these valuable compounds. Solid-state fermentation processes support the natural production of secondary metabolites, which represents most flavour and aroma compounds, while agro-industrial by-products are a low-value waste stream with a high potential for adding value. Accordingly, four filamentous fungi species with a history of use in the production of fermented foods and food additives were tested to ferment nine different agro-industrial by-products. Hundreds of volatile compounds were produced and identified using headspace (HS) solid-phase microextraction (SPME) coupled to gas chromatography–mass spectrometry (GC–MS). Four compounds of interest, phenylacetaldehyde, methyl benzoate, 1-octen-3-ol, and phenylethyl alcohol, were extracted and quantified. Preliminary yields were encouraging compared to traditional sources. This, combined with the low-cost substrates and the high-value natural flavours and aromas produced, presents a compelling case for further optimisation of the process.

Role of Plasticizers on PHB/bio-TPE Blends Compatibilized by Reactive Extrusion

Poly(hydroxybutyrate) (PHB) is a biopolymer biologically synthesized by controlled bacterial fermentation from a wide variety of microorganisms. PHB is proposed as a potential green alternative to commonly used plastics in packaging, due to its biodegradability and biocompatibility. However, if PHB is to replace commodities, it has some limitations regarding its thermo-mechanical performance to overcome. Among them are its critically the low toughness values at room temperature and poor thermoforming ability. With the aim of overcoming these weaknesses, in this work, blends of PHB with the addition of a biodegradable thermoplastic elastomer (bio-TPE) were prepared and evaluated. Films of such compounds were made by cast extrusion. In order to enhance the compatibility of both polymers during the extrusion process, three different reactive agents (poly-hexametylene diisocianate, triglycidyl isocyanurate, and Joncryl^® ADR-4368) were assessed. The morphology and mechanical- and thermal properties of the films obtained were analyzed. In addition, the thermoforming ability of the produced films was evaluated. The results show that the plasticizers present in the bio-TPE interacted with the reactive agents, making them chemical competitors and altering the outcome of the blends.

Microbial-Derived Polyhydroxyalkanoate-Based Scaffolds for Bone Tissue Engineering: Biosynthesis, Properties, and Perspectives

Polyhydroxyalkanoates (PHAs) are a class of structurally diverse natural biopolyesters, synthesized by various microbes under unbalanced culture conditions. PHAs as biomedical materials have been fabricated in various forms to apply to tissue engineering for the past years due to their excellent biodegradability, inherent biocompatibility, modifiable mechanical properties, and thermo-processability. However, there remain some bottlenecks in terms of PHA production on a large scale, the purification process, mechanical properties, and biodegradability of PHA, which need to be further resolved. Therefore, scientists are making great efforts via synthetic biology and metabolic engineering tools to improve the properties and the product yields of PHA at a lower cost for the development of various PHA-based scaffold fabrication technologies to widen biomedical applications, especially in bone tissue engineering. This review aims to outline the biosynthesis, structures, properties, and the bone tissue engineering applications of PHA scaffolds with different manufacturing technologies. The latest advances will provide an insight into future outlooks in PHA-based scaffolds for bone tissue engineering.

A comparative analysis of biopolymer production by microbial and bioelectrochemical technologies

Production of biopolymers from renewable carbon sources provides a path towards a circular economy. This review compares several existing and emerging approaches for polyhydroxyalkanoate (PHA) production from soluble organic and gaseous carbon sources and considers technologies based on pure and mixed microbial cultures. While bioplastics are most often produced from soluble sources of organic carbon, the use of carbon dioxide (CO₂) as the carbon source for PHA production is emerging as a sustainable approach that combines CO₂ sequestration with the production of a value-added product. Techno-economic analysis suggests that the emerging approach of CO₂ conversion to carboxylic acids by microbial electrosynthesis followed by microbial PHA production could lead to a novel cost-efficient technology for production of green biopolymers.

Biopolymers production from renewable carbon sources.

Structural assessment of the bioplastic (poly-3-hydroxybutyrate) produced by Bacillus flexus Azu-A2 through cheese whey valorization

The demand for the production of biodegradable plastics has significantly increased. Bioplastics have become an essential alternative to the threats of the daily consumable plastics, sourced from fossil fuels, to the environment. Polyhydroxyalkonates (PHAs) are a ubiquitous group of bioderived and biodegradable plastics, however their production is limited by the costs associated mainly with the carbon sources. Herein, this study aims to reduce the PHAs production cost by using a by-product from the dairy industry, i.e., cheese whey (CW), as a sole carbon source. The developed process recruits an aquatic isolate, Bacillus flexus Azu-A2, and is optimized via studying various parameters using the shaking flasks technique. The results showed that the maximum PHA production (0.95 g L^-1) and PHA content (20.96%, w/w), were obtained after incubation period 72 h at 45 °C, 100 rpm agitation rate, 50% CWS concentration, pH 8.5, and 1.0 g L^-1 ammonium chloride. Physiochemically, Fourier transform infrared spectroscopy (FTIR), gas chromatography-mass spectroscopy (GC-MS), nuclear magnetic resonance (NMR), and energy-dispersive X-ray (EDX) techniques, emphasized the type of the extracted PHA as polyhydroxybutyrate (PHB). The thermal properties of PHB were measured using differential scanning calorimetry (DSC), recording melting transition temperature (Tm) at 170.96 °C. Furthermore, a scanning electron microscope (SEM) visualized a homogenous microporous structure for the thin PHB biofilm. In essence, this study highlights the ability of Bacillus flexus Azu-A2 to produce a good yield of highly purified PHB at reduced production cost from dairy CW. Consequently, the current study paves the way for an improved whey management strategy.

Channelling carbon flux through the meta-cleavage route for improved poly(3-hydroxyalkanoate) production from benzoate and lignin-based aromatics in Pseudomonas putida H

Lignin-based aromatics are attractive raw materials to derive medium-chain length poly(3-hydroxyalkanoates) (mcl-PHAs), biodegradable polymers of commercial value. So far, this conversion has exclusively used the ortho-cleavage route of Pseudomonas putida KT2440, which results in the secretion of toxic intermediates and limited performance. Pseudomonas putida H exhibits the ortho- and the meta-cleavage pathways where the latter appears promising because it stoichiometrically yields higher levels of acetyl-CoA. Here, we created a double-mutant H-ΔcatAΔA2 that utilizes the meta route exclusively and synthesized 30% more PHA on benzoate than the parental strain but suffered from catechol accumulation. The single deletion of the catA2 gene in the H strain provoked a slight attenuation on the enzymatic capacity of the ortho route (25%) and activation of the meta route by nearly 8-fold, producing twice as much mcl-PHAs compared to the wild type. Inline, the mutant H-ΔcatA2 showed a 2-fold increase in the intracellular malonyl-CoA abundance - the main precursor for mcl-PHAs synthesis. As inferred from flux simulation and enzyme activity assays, the superior performance of H-ΔcatA2 benefited from reduced flux through the TCA cycle and malic enzyme and diminished by-product formation. In a benzoate-based fed-batch, P. putida H-ΔcatA2 achieved a PHA titre of 6.1 g l-1 and a volumetric productivity of 1.8 g l-1 day-1 . Using Kraft lignin hydrolysate as feedstock, the engineered strain formed 1.4 g l- 1 PHA. The balancing of carbon flux between the parallel catechol-degrading routes emerges as an important strategy to prevent intermediate accumulation and elevate mcl-PHA production in P. putida H and, as shown here, sets the next level to derive this sustainable biopolymer from lignin hydrolysates and aromatics.

Two-Stage Polyhydroxyalkanoates (PHA) Production from Cheese Whey Using Acetobacter pasteurianus C1 and Bacillus sp. CYR1

Cheese whey (CW) can be an excellent carbon source for polyhydroxyalkanoates (PHA)-producing bacteria. Most studies have used CW, which contains high amounts of lactose, however, there are no reports using raw CW, which has a relatively low amount of lactose. Therefore, in the present study, PHA production was evaluated in a two-stage process using the CW that contains low amounts of lactose. In first stage, the carbon source existing in CW was converted into acetic acid using the bacteria, Acetobacter pasteurianus C1, which was isolated from food waste. In the second stage, acetic acid produced in the first stage was converted into PHA using the bacteria, Bacillus sp. CYR-1. Under the condition of without the pretreatment of CW, acetic acid produced from CW was diluted at different folds and used for the production of PHA. Strain CYR-1 incubated with 10-fold diluted CW containing 5.7 g/L of acetic acid showed the higher PHA production (240.6 mg/L), whereas strain CYR-1 incubated with four-fold diluted CW containing 12.3 g/L of acetic acid showed 126 mg/L of PHA. After removing the excess protein present in CW, PHA production was further enhanced by 3.26 times (411 mg/L) at a four-fold dilution containing 11.3 g/L of acetic acid. Based on Fourier transform infrared spectroscopy (FT-IR), and ¹H and ¹³C nuclear magnetic resonance (NMR) analyses, it was confirmed that the PHA produced from the two-stage process is poly-β-hydroxybutyrate (PHB). All bands appearing in the FT-IR spectrum and the chemical shifts of NMR nearly matched with those of standard PHB. Based on these studies, we concluded that a two-stage process using Acetobacter pasteurianus C1 and Bacillus sp. CYR-1 would be applicable for the production of PHB using CW containing a low amount of lactose.

Development and Advantages of Biodegradable PHA Polymers Based on Electrospun PHBV Fibers for Tissue Engineering and Other Biomedical Applications

Biodegradable polymeric biomaterials offer a significant advantage in disposable or fast-consuming products in medical applications. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is an example of a polyhydroxyalkanoate (PHA), i.e., one group of natural polyesters that are byproducts of reactions taking place in microorganisms in conditions with an excess carbon source. PHA polymers are a promising material for the production of everyday materials and biomedical applications. Due to the high number of monomers in the group, PHAs permit modifications enabling the production of copolymers of different compositions and with different proportions of individual monomers. In order to change and improve the properties of polymer fibers, PHAs are combined with either other natural and synthetic polymers or additives of inorganic phases. Importantly, electrospun PHBV fibers and mats showed an enormous potential in both the medical field (tissue engineering scaffolds, plasters, wound healing, drug delivery systems) and industrial applications (filter systems, food packaging). This Review summarizes the current state of the art in processing PHBV, especially by electrospinning, its degradation processes, and biocompatibility studies, starting from a general introduction to the PHA group of polymers.

Environmental impact of bioplastic use: A review

Throughout their lifecycle, petroleum-based plastics are associated with many environmental problems, including greenhouse gas emissions, persistence in marine and terrestrial environments, pollution, etc. On the other hand, bioplastics form a rapidly growing class of polymeric materials that are commonly presented as alternatives to conventional petroleum-based plastics. However, bioplastics also have been linked to important environmental issues such as greenhouse gas emissions and unfavorable land use change, making it necessary to evaluate the true impact of bioplastic use on the environment. Still, while many reviews discuss bioplastics, few comprehensively and simultaneously address the positives and negatives of bioplastic use for the environment. The primary focus of the present review article is to address this gap in present research. To this end, this review addresses the following questions: (1) what are the different types of bioplastics that are currently in commercial use or under development in the industry; (2) are bioplastics truly good for the environment; and (3) how can we better resolve the controversial impact of bioplastics on the environment? Overall, studies discussed in this review article show that the harms associated with bioplastics are less severe as compared to conventional plastics. Moreover, as new types of bioplastics are developed, it becomes important that future studies conduct thorough life cycle and land use change analyses to confirm the eco-friendliness of these new materials. Such studies will help policymakers to determine whether the use of new-generation bioplastics is indeed beneficial to the environment.

Methane-based biosynthesis of 4-hydroxybutyrate and P(3-hydroxybutyrate-co-4-hydroxybutyrate) using engineered Methylosinus trichosporium OB3b

4-Hydroxybutyric acid (4-HB) is a key platform chemical that serves as a precursor in a wide variety of industrial applications including 1,4-butanediol and bioplastics production. In this study, we reconstructed 4-HB biosynthetic pathway including CoA-dependent succinate semialdehyde dehydrogenase and NADPH-dependent succinate semialdehyde reductase in Type II methanotrophs, Methylosinus trichosporium OB3b, to synthesize 4-HB. These engineered strains were able to synthesize 4-HB from methane via tricarboxylic acid cycle. 4-HB synthesis was further improved to 10.5 mg/L by overexpressing phosphoenolpyruvate carboxylase, isocitrate dehydrogenase and 2-oxoglutarate dehydrogenase genes in M. trichosporium OB3b. We combined the native poly(3-hydroxybutyrate) metabolic pathway and reconstructed 4-HB biosynthetic pathway to synthesize P(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymer from structurally unrelated substrate methane as a single carbon source. These engineered strains could synthesize P(3HB-co-4HB) copolymer with 3.08 mol% 4-HB from methane. This study provides several engineering strategies to synthesize polyhydroxyalkanoates and their monomers from methane.

Study on the comprehensive utilization of solid residues of Flammulina velutipes and vinegar and their application as feed in Eisenia fetida earthworm culture

To explore the comprehensive utilization of agricultural wastes, solid-state fermentation was applied to residues of Flammulina velutipes (F. velutipes) and vinegar for use in culturing earthworms. Fermentation technology and earthworm culture technology were optimized by response surface methodology in this study. The optimal fermentation product for earthworm culture was obtained under an inoculum amount of 7.5%, fermentation temperature of 25.6 °C, pH 7.7 and protein content of 18.23%. The optimum culture conditions were a culture density of 18.4 individuals/dm³, an initial pH of 7.2 and a fermentation temperature of 26.8 °C. The daily weight gain multiplier of earthworms was 0.0387 units, and it increased significantly compared with that of the unfermented and cow dung groups. The fermented product of F. velutipes and vinegar residues could be used to culture earthworms and improve the metabolism and antioxidant capacities of earthworms. This provides a new way to comprehensively utilize agricultural waste resources.

Post-Transcriptional Control in the Regulation of Polyhydroxyalkanoates Synthesis

The large production of non-degradable petrol-based plastics has become a major global issue due to its environmental pollution. Biopolymers produced by microorganisms such as polyhydroxyalkanoates (PHAs) are gaining potential as a sustainable alternative, but the high cost associated with their industrial production has been a limiting factor. Post-transcriptional regulation is a key step to control gene expression in changing environments and has been reported to play a major role in numerous cellular processes. However, limited reports are available concerning the regulation of PHA accumulation in bacteria, and many essential regulatory factors still need to be identified. Here, we review studies where the synthesis of PHA has been reported to be regulated at the post-transcriptional level, and we analyze the RNA-mediated networks involved. Finally, we discuss the forthcoming research on riboregulation, synthetic, and metabolic engineering which could lead to improved strategies for PHAs synthesis in industrial production, thereby reducing the costs currently associated with this procedure.

Sugar Beet Cultivation in India: Prospects for Bio-Ethanol Production and Value-Added Co-Products

Sugar beet is an important crop in the advent of COVID 19 as it has a high potential for ethanol production in less growth span. The life cycle of this crop is of five to six months with a root yield of 60-80 t ha-1 and sugar content of 15-17%. Sugar beet is known as a temperate crop of short duration grown in the month of September to October and harvested in April and May, but successful efforts have been made in establishing this crop for Indian agro-climatic conditions. India stands to gain from capitalizing on the potential of sugar beet for sugar, ethanol, and fodder. It offers the increment in the farmer's income especially hill farmers with respect to seed production of this crop in India The crop has been bestowed with a natural endowment of reclaiming saline soils which will help in cultivating the Indian saline areas. The crop is full of carbohydrates content which is being used for multiple purposes giving value addition to the crop. The green top and, wet and dry pulp are a good source of fodder material for lactating animals like cattle. Beet pulp is another good source as silage feed and as an adhesive in beauty products as well as in printing ink. An amount of 5250 L of ethanol per hectare crop can be produced. Due to 30% galacturonic acid content, the dry beet pulp can also be used as a source of Vitamin C. Lactic acid is also being produced from the juice of sugar beet through fermentation. The pectin content of this crop is useful in paper and board manufacturing industries as a raw material and also in dishwashing detergents and leather production. The fiber content works as dietary fibers which are used in meat and baking industries as important ingredients in food commodities. The vinasse produced as an industrial by-product is useful as a fertilizer. Sugar beet tails and other parts have also been used in biogas production in some countries. Intercropping of this crop with other crops is an added benefit of this crop. New prospects are also available for this crop in pharmaceutical industries and material sciences in times to come.

Potential Role of Sequential Solid-State and Submerged-Liquid Fermentations in a Circular Bioeconomy

An efficient processing of organic solid residues will be pivotal in the development of the circular bioeconomy. Due to their composition, such residues comprise a great biochemical conversion potential through fermentations. Generally, the carbohydrates and proteins present in the organic wastes cannot be directly metabolized by microorganisms. Thus, before fermentation, enzymes are used in a hydrolysis step to release digestible sugars and nitrogen. Although enzymes can be efficiently produced from organic solid residues in solid-state fermentations (SsF), challenges in the development and scale-up of SsF technologies, especially bioreactors, have hindered a wider application of such systems. Therefore, most of the commercial enzymes are produced in submerged-liquid fermentations (SmF) from expensive simple sugars. Instead of independently evaluating SsF and SmF, the review covers the option of combining them in a sequential process in which, enzymes are firstly produced in SsF and then used for hydrolysis, yielding a suitable medium for SmF. The article reviews experimental work that has demonstrated the feasibility of the process and underlines the benefits that such combination has. Finally, a discussion is included which highlights that, unlike typically perceived, SsF should not be considered a counterpart of SmF but, in contrast, the main advantages of each type of fermentation are accentuated in a synergistic sequential SsF-SmF.

A Comprehensive Review on Valorization of Agro-Food Industrial Residues by Solid-State Fermentation

Agro-food industrial residues (AFIRs) are generated in large quantities all over the world. The vast majority of these wastes are lignocellulosic wastes that are a source of value-added products. Technologies such as solid-state fermentation (SSF) for bioconversion of lignocellulosic waste, based on the production of a wide range of bioproducts, offer both economic and environmental benefits. The versatility of application and interest in applying the principles of the circular bioeconomy make SSF one of the valorization strategies for AFIRs that can have a significant impact on the environment of the wider community. Important criteria for SSF are the selection of the appropriate and compatible substrate and microorganism, as well as the selection of the optimal process parameters for the growth of the microorganism and the production of the desired metabolites. This review provides an overview of the management of AFIRs by SSF: the current application, classification, and chemical composition of AFIRs; the catalytic function and potential application of enzymes produced by various microorganisms during SSF cultivation on AFIRs; the production of phenolic compounds by SSF; and a brief insight into the role of SSF treatment of AFIRs for feed improvement and biofuel production.

Waste biorefinery towards a sustainable circular bioeconomy: a solution to global issues

Global issues such as environmental problems and food security are currently of concern to all of us. Circular bioeconomy is a promising approach towards resolving these global issues. The production of bioenergy and biomaterials can sustain the energy-environment nexus as well as substitute the devoid of petroleum as the production feedstock, thereby contributing to a cleaner and low carbon environment. In addition, assimilation of waste into bioprocesses for the production of useful products and metabolites lead towards a sustainable circular bioeconomy. This review aims to highlight the waste biorefinery as a sustainable bio-based circular economy, and, therefore, promoting a greener environment. Several case studies on the bioprocesses utilising waste for biopolymers and bio-lipids production as well as bioprocesses incorporated with wastewater treatment are well discussed. The strategy of waste biorefinery integrated with circular bioeconomy in the perspectives of unravelling the global issues can help to tackle carbon management and greenhouse gas emissions. A waste biorefinery-circular bioeconomy strategy represents a low carbon economy by reducing greenhouse gases footprint, and holds great prospects for a sustainable and greener world.

Production of polyhydroxyalkanoates using dairy processing waste - A review

Bio-plastics are eco-friendly biopolymers finding tremendous application in the food and pharmaceutical industries. Bio-plastics have suitable physicochemical, mechanical properties, and do not cause any type of hazardous pollution upon disposal but have a high production cost. This can be minimized by screening potential bio-polymers producing strains, selecting inexpensive raw material, optimized cultivation conditions, and upstream processing. These bio-plastics specifically microbial-produced bio-polymers such as polyhydroxyalkanoates (PHAs) find application in food industries as packaging material owing to their desirable water barrier and gas permeability properties. The present review deals with the production, recovery, purification, characterization, and applications of PHAs. This is a comprehensive first review will also focus on different strategies adopted for efficient PHA production using dairy processing waste, its biosynthetic mechanism, metabolic engineering, kinetic aspects, and also biodegradability testing at the lab and pilot plant level. In addition to that, the authors will be emphasizing more on novel PHAs nanocomposites synthesis strategies and their commercial applicability.

The role of biotechnology in the transition from plastics to bioplastics: an opportunity to reconnect global growth with sustainability

Building new value chains, through the valorization of biomass components for the development of innovative bio‐based products (BBPs) aimed at specific market sectors, will accelerate the transition from traditional production technologies to the concept of biorefineries. Recent studies aimed at mapping the most relevant innovations undergoing in the field of BBPs (Fabbri et al. 2019, Final Report of the Task 3 BIOSPRI Tender Study on Support to R&I Policy in the Area of Bio‐based Products and Services, delivered to the European Commission (DG RTD)), clearly showed the dominant position played by the plastics sector, in which new materials and innovative technical solutions based on renewable resources, concretely contribute to the achievement of relevant global sustainability goals. New sustainable solutions for the plastic sector, either bio‐based or bio‐based and biodegradable, have been intensely investigated in recent years. The global bioplastics and biopolymers market size is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion by 2025 (Markets and Markets, 2020, Bioplastics & Biopolymers Market by Type (Non‐Biodegradable/Bio‐Based, Biodegradable), End‐Use Industry (Packaging, Consumer Goods, Automotive & Transportation, Textiles, Agriculture & Horticulture), Region ‐ Global Forecast to 2025), and this high growth is driven primarily by the growth of the global packaging end‐use industry. Such relevant opportunities are the outcomes of intensive scientific and technological research devoted to the development of new materials with selected technical features, which can represent feasible substitutes for the fossil‐based plastic materials currently used in the packaging sectors and other main fields. This article offers a map of the latest developments connected to the plastic sector, achieved through the application of biotechnological routes for the preparation of completely new polymeric structures, or drop‐in substitutes derived from renewable resources, and it describes the specific role played by biotechnology in promoting and making this transition faster.

Haloarchaea as Cell Factories to Produce Bioplastics

Plastic pollution is a worldwide concern causing the death of animals (mainly aquatic fauna) and environmental deterioration. Plastic recycling is, in most cases, difficult or even impossible. For this reason, new research lines are emerging to identify highly biodegradable bioplastics or plastic formulations that are more environmentally friendly than current ones. In this context, microbes, capable of synthesizing bioplastics, were revealed to be good models to design strategies in which microorganisms can be used as cell factories. Recently, special interest has been paid to haloarchaea due to the capability of some species to produce significant concentrations of polyhydroxyalkanoate (PHA), polyhydroxybutyrate (PHB), and polyhydroxyvalerate (PHV) when growing under a specific nutritional status. The growth of those microorganisms at the pilot or industrial scale offers several advantages compared to that of other microbes that are bioplastic producers. This review summarizes the state of the art of bioplastic production and the most recent findings regarding the production of bioplastics by halophilic microorganisms with special emphasis on haloarchaea. Some protocols to produce/analyze bioplastics are highlighted here to shed light on the potential use of haloarchaea at the industrial scale to produce valuable products, thus minimizing environmental pollution by plastics made from petroleum.

Brewer's spent grain as a no-cost substrate for polyhydroxyalkanoates production: Assessment of pretreatment strategies and different bacterial strains

Polyhydroxyalkanoates (PHAs) are polyesters of significant interest due to their biodegradability and properties similar to petroleum-derived plastics, as well as the fact that they can be produced from renewable sources such as by-product streams. In this study, brewer's spent grain (BSG), the main by-product of the brewing industry, was subjected to a set of physicochemical pretreatments and their effect on the release of reducing sugars (RS) was evaluated. The RS obtained were used as a substrate for further PHA production in Burkholderia cepacia, Bacillus cereus, and Cupriavidus necator in liquid cultures. Although some pretreatments proved efficient in releasing RS (acid-thermal pretreatment up to 42.1 gRS L^-1 and 0.77 gRS g^-1 dried BSG), the generation of inhibitors in such scenarios likely affected PHA production compared with the process run without pretreatment (direct enzymatic hydrolysis of BSG). Thus, the maximum PHA accumulation from BSG hydrolysates was found in the reference case with 0.31 ± 0.02 g PHA per g cell dried weight, corresponding to 1.13 ± 0.06 g L^-1 and a PHA yield of 23 ± 1 mg g^-1 BSG. It was also found that C. necator presented the highest PHA accumulation of the tested strains followed closely by B. cepacia, reaching their maxima at 48 h. Although BSG has been used as a source for other bioproducts, these results show the potential of this by-product as a no-cost raw material for producing PHAs in a waste valorization and circular economy scheme.

Wine By-Products as Raw Materials for the Production of Biopolymers and of Natural Reinforcing Fillers: A Critical Review

The plastic industry is today facing a green revolution; however, biopolymers, produced in low amounts, expensive, and food competitive do not represent an efficient solution. The use of wine waste as second-generation feedstock for the synthesis of polymer building blocks or as reinforcing fillers could represent a solution to reduce biopolymer costs and to boost the biopolymer presence in the market. The present critical review reports the state of the art of the scientific studies concerning the use of wine by-products as substrate for the synthesis of polymer building blocks and as reinforcing fillers for polymers. The review has been mainly focused on the most used bio-based and biodegradable polymers present in the market (i.e., poly(lactic acid), poly(butylene succinate), and poly(hydroxyalkanoates)). The results present in the literature have been reviewed and elaborated in order to suggest new possibilities of development based on the chemical and physical characteristics of wine by-products.

Polyhydroxyalkanoates (PHAs): Biopolymers for Biofuel and Biorefineries

Fossil fuels are energy recourses that fulfill most of the world's energy requirements. However, their production and use cause severe health and environmental problems including global warming and pollution. Consequently, plant and animal-based fuels (also termed as biofuels), such as biogas, biodiesel, and many others, have been introduced as alternatives to fossil fuels. Despite the advantages of biofuels, such as being renewable, environmentally friendly, easy to source, and reducing the dependency on foreign oil, there are several drawbacks of using biofuels including high cost, and other factors discussed in the fuel vs. food debate. Therefore, it is imperative to produce novel biofuels while also developing suitable manufacturing processes that ease the aforementioned problems. Polyhydroxyalkanoates (PHAs) are structurally diverse microbial polyesters synthesized by numerous bacteria. Moreover, this structural diversity allows PHAs to readily undergo methyl esterification and to be used as biofuels, which further extends the application value of PHAs. PHA-based biofuels are similar to biodiesel except for having a high oxygen content and no nitrogen or sulfur. In this article, we review the microbial production of PHAs, biofuel production from PHAs, parameters affecting the production of fuel from PHAs, and PHAs biorefineries. In addition, future work on the production of biofuels from PHAs is also discussed.

Whole-cell biocatalysis using the Acidovorax sp. CHX100 Δ6HX for the production of ω-hydroxycarboxylic acids from cycloalkanes

Omega hydroxycarboxylic acids (ω-HAs) possess two functional groups, a hydroxyl group and a carboxyl group, and are essential precursors for the production of biodegradable polyester polymers. In this work, an Acidovorax mutant was investigated as a whole-cell biocatalyst for the conversion of cycloalkanes to their respective ω-hydroxycarboxylic acids. This Acidovorax sp. strain CHX100 originated from a wastewater treatment plant and uses cyclohexane as the sole source of carbon and energy with excellent growth rates (0.199 h^-1). The metabolic efficiency of Acidovorax CHX100 is based on a highly efficient enzyme cascade used for the mineralization of cyclohexane. A deletion of 6-hydroxyhexanoate dehydrogenase in the native cycloalkane pathway resulted in the Acidovorax sp. strain CHX100 Δ6HX mutant, which accumulated short ω-hydroxycarboxylic acids (C5 to C10) from cycloalkanes. This mutant transformed cyclopentane and cyclohexane (5 mM) to 5-hydroxypentanoic acid and 6-hydroxyhexanoic acid, respectively, with a molar conversion above 98% in 6 h. An elementary environmental and economical assessment based on E-factor and biocatalyst yield suggests the use of inexpensive electron donor and carbon sources, with subsequent efforts to minimize waste generation. Such an early-stage analysis highlights the main bottlenecks that need to be solved in developing a sustainable bioprocess.

A review on valorization of spent coffee grounds (SCG) towards biopolymers and biocatalysts production

Spent coffee grounds (SCG) are an important waste product millions of tons generated from coffee consumption and could be effectively utilized for various applications due to their high organic content. SCG can be used as a potential feedstock to develop coffee-based biorefinery towards value-added products generation through various biotechnological processes. Considerable developments have been reported on emerging SCG-based processes/products in various environmental fields such as removal of heavy metals and cationic dyes and in wastewater treatment. In addition, SCG are also utilized to produce biochar and biofuels. This review addressed the details of innovative processes used to produce polymers and catalysts from SCG. Moreover, the application of these developed products is provided and future directions of the circular economy for SCG utilization.

Polyhydroxyalkanoates (PHA) production from biogas in waste treatment facilities: Assessing the potential impacts on economy, environment and society

Using the biogas generated from organic waste anaerobic treatment to produce polyhydroxyalkanoates (PHAs) has emerged as an attractive alternative to heat and power generation (CHP) in waste treatment plants. The sustainability of biogas combustion for CHP, biogas bioconversion into PHA and a combination of both scenarios was compared in terms of environmental impact, process economics and social responsibility according to the IChemE Sustainability Metrics. Although PHA production presented higher investment and operational costs, a comparable economic performance was observed in all biogas valorization scenarios regarding net present value (0.77 M€) and internal rate of return (6.4 ± 0.2%) due to the higher market value of biopolymers. The PHA production entailed a significant reduction of atmospheric acidification and odor emissions compared to CHP despite showing higher land, water, chemicals and energy requirements. Job creation associated to biopolymer industry and the increasing public demand for bioproducts were identified as fundamental aspects for enhancing social and local acceptance of waste processing facilities. This study demonstrated that PHA production from biogas constitutes nowadays a realistic alternative to CHP in waste treatment plants and that PHA can be produced at a competitive market price when biogas is used for internal energy provision (4.2 €·kg^-1 PHA).

An appropriate technique for treating rural wastewater by a flow step feed system driven by wind-solar hybrid power

Most rural wastewater treatment facilities require aeration equipment to ensure sufficient dissolved oxygen (DO) during processing. Operation and maintenance are costly, and cannot be met in many areas with poor economic levels. This has led to further deterioration of the rural water environment and aroused much attention. This work reports a plug-flow step feed system utilizing wind and solar hybrid energy for rural wastewater treatment. Under certain climatic conditions, the wind energy and solar energy provided complimentary power generation, and an automatic control system (without batteries) was constructed. The corresponding control logic for multi-energy level operation was developed. Furthermore, the power generation efficiency of the system, the pollutant removal, and its mechanism on the bioreactor were also analyzed. According to the monitoring of meteorological conditions, wind and solar resources at the test site were abundant, and the electricity generated by the power generation was sufficient to meet the operational needs of the equipment. Energy efficiency can reach 80.0%. The characteristics of pollutant removal in each process section were studied on spatial and temporal dimensions. Results showed that the wastewater treatment process reached mean removal efficiencies of chemical oxygen demand (COD_cr), NH₄⁺-N, total nitrogen (TN) and total phosphorus (TP) were 90.2%, 94.3%, 61.4% and 63.1%, respectively. Analyses of microbial community richness and group changes in each anoxic/aerobic reaction chamber in the biofilm reactor showed that the population structure was relatively stable and that there were abundant functional bacteria capable of degrading pollutants in each aerobic and anoxic unit. This system can thus be a more sustainable treatment process than traditional techniques used for rural wastewater treatment, providing a new design approach for low-energy consumption and unattended rural wastewater treatment.

Biogas valorization via continuous polyhydroxybutyrate production by Methylocystis hirsuta in a bubble column bioreactor

Creating additional value out of biogas during waste treatment has become a priority in past years. Biogas bioconversion into valuable bioproducts such as biopolymers has emerged as a promising strategy. This work assessed the operational feasibility of a bubble column bioreactor (BCB) implemented with gas recirculation and inoculated with a polyhydroxybutyrate (PHB)-producing strain using biogas as substrate. The BCB was initially operated at empty bed residence times (EBRTs) ranging from 30 to 120 min and gas recirculation ratios (R) from 0 to 30 to assess the gas-to-liquid mass transfer and bioconversion of CH₄. Subsequently, the BCB was continuously operated at a R of 30 and an EBRT of 60 min under excess of nitrogen and nitrogen feast-famine cycles of 24 h:24 h to trigger PHB synthesis. Gas recirculation played a major role in CH₄ gas-liquid transfer, providing almost fourfold higher CH₄ elimination capacities (~41 g CH₄ m^-3 h^-1) at the highest R and EBRT of 60 min. The long-term operation under N excess conditions entailed nitrite accumulation (induced by O₂ limiting conditions) and concurrent methanotrophic activity inhibition above ~60 mg N-NO₂^- L^-1. Adjusting the N-NO₃^- supply to match microbial N demand successfully prevented nitrite accumulation. Finally, the N feast-famine 24 h:24 h strategy supported a stable CH₄ conversion with a removal efficiency of 70% along with a continuous PHB production, which yielded PHB accumulations of 14.5 ± 2.9% (mg PHB mg^-1 total suspended solids × 100). These outcomes represent the first step towards the integration of biogas biorefineries into conventional anaerobic digestion plants.

Novel approach for the treatment of the organic fraction of municipal solid waste: Coupling thermal hydrolysis with anaerobic digestion and photo-fermentation

In this study, two different organic fractions of municipal solid waste (OFMSW) served as raw material in a novel treatment process that combines thermal hydrolysis (TH) pretreatment at different times, followed by anaerobic digestion of the solid fraction and photo-fermentation of the liquid fraction. The results indicate that both wastes performed similarly, and no statistically relevant differences stand out on the overall performance regarding TH times. The thermal pretreatment improves the biodegradability of the solid fraction during anaerobic digestion compensating the loss of the organic matter in the liquid fraction. The produced biogas may feed a combined heat and power (CHP) system, making the process energetically positive in all studied scenarios. In addition, the combination of TH and anaerobic digestion decreased the volume of the waste to be disposed by 59-61%, which is 5-11% higher than that obtained with the traditional treatment of anaerobic digestion process. Specific phototrophic activity tests were performed on the liquid phase using a mixed culture of purple phototrophic bacteria (PPB) that consumed up to 80% of the soluble organics. The assays yielded an average 52% efficiency on specific phototrophic activity (k_M) and 62% on biomass yield (Y_X/S), compared to an optimized growth medium. PPB was also capable of producing polyhydroxyalkanoates, bioH₂ and single-cell protein without optimization. Apart from methane, the overall mass balances showed yields up to 150 g of high added-value products per Kg of initial total solids on this proof-of-concept platform.

Recent advances in polyhydroxyalkanoate production: Feedstocks, strains and process developments

Polyhydroxyalkanoates (PHAs) have been actively studied in academia and industry for their properties comparable to petroleum-derived plastics and high biocompatibility. However, the major limitation for commercialization is their high cost. Feedstock costs, especially carbon costs, account for the majority of the final cost. Finding cheap feedstocks for PHA production and associated process development are critical for a cost-effective PHA production. In this study, waste materials from different sources, particularly lignocellulosic biomass, were proposed as suitable feedstocks for PHA production. Strains involved in the conversion of these feedstocks into PHA were reviewed. Newly isolated strains were emphasized. Related process development, including the factors that affect PHA production, fermentation modes and downstream processing, was elaborated upon.

Polyhydroxyalkanoates (PHAs) Production: A Feasible Economic Option for the Treatment of Sewage Sludge in Municipal Wastewater Treatment Plants?

Sludge is a by-product of municipal wastewater treatment plants (WWTPs) and its management contributes significantly to the operating costs. Large WWTPs usually have anaerobic sludge digesters to valorize sludge as methane and to reduce its mass. However, the low methane market price opens the possibility for generating other high value-added products from the organic matter in sludge, such as polyhydroxyalkanoates (PHAs). In this work, the economic feasibility of retrofitting two types of WWTPs to convert them into biofactories of crude PHAs was studied. Two cases were analyzed: (a) a large WWTP with anaerobic sludge digestion; and (b) a small WWTP where sludge is only dewatered. In a two-stage PHA-production system (biomass enrichment plus PHAs accumulation), the minimum PHAs cost would be 1.26 and 2.26 US$/kg PHA-crude for the large and small WWTPs, respectively. In a single-stage process, where a fraction of the secondary sludge (25%) is directly used to accumulate PHAs, the production costs would decrease by around 15.9% (small WWTPs) and 19.0% (large WWTPs), since capital costs associated with bioreactors decrease. Sensitivity analysis showed that the PHA/COD (Chemical Oxygen Demand) yield is the most crucial parameter affecting the production costs. The energy, methane, and sludge management prices also have an essential effect on the production costs, and their effect depends on the WWTP’s size.

A review on the conversion of volatile fatty acids to polyhydroxyalkanoates using dark fermentative effluents from hydrogen production

The production of bio/microbial-based polymers, polyhydroxyalkanoates (PHAs) from volatile fatty acids (VFAs) of dark fermentative effluents in the bio-H₂ reactor is being paid attention, owing to their commercial demand, applications and as carbon as well as energy storage source. Since, they are the cheap precursors for such valuable renewable biopolymers which all possess the properties; those are analogous to the petro-derived plastics. Several studies were stated, related to the consumption of both individual and mixed VFAs for the potential PHAs production. Their biodegradability nature makes them extremely desirable alternative to fossil-derived synthetic polymers. In this regard, this review summarizes the use of bio-based PHAs production via both microbial and biochemical pathways using dark fermentative bio-H₂ production from waste streams as feedstock. Furthermore, this review deals the characteristics, synthesis and production of the bio-based PHAs along with their co-polymers and applications to give an outlook on future research.

Polyhydroxyalkanoate (PHA): applications in drug delivery and tissue engineering

INTRODUCTION

The applications of naturally obtained polymers are tremendously increased due to them being biocompatible, biodegradable, environmentally friendly and renewable in nature. Among them, polyhydroxyalkanoates are widely studied and they can be utilized in many areas of human life research such as drug delivery, tissue engineering, and other medical applications.

AREAS COVERED

This review provides an overview of the polyhydroxyalkanoates biosynthesis and their possible applications in drug delivery in the range of micro- and nano-size. Moreover, the possible applications in tissue engineering are covered considering macro- and microporous scaffolds and extracellular matrix analogs.

EXPERT COMMENTARY

The majority of synthetic plastics are non-biodegradable so, in the last years, a renewed interest is growing to develop alternative processes to produce biologically derived polymers. Among them, PHAs present good properties such as high immunotolerance, low toxicity, biodegradability, so, they are promisingly using as biomaterials in biomedical applications.