The adsorption of heavy metal by Bornean oil palm shell and its potential application as constructed wetland media

Potential of using Alfa grass fibers (Stipa Tenacissima L.) to remove Pb2+, Cu2+, and Zn2+ from an aqueous solution

This study used alfa grass fibres as a natural low-cost adsorbent to remove lead, copper, and zinc ions from aqueous solutions. The adsorbent was characterized by FTIR, SEM, BET surface area, ATG, and XRD techniques. The effects of pH, contact time, initial metal concentration, and adsorbent dosage on the adsorption efficiency were evaluated in batch experiments. The results showed that the adsorption of all metals was fast, and optimal removal efficiency was achieved within 25 min of contact time using 5000 mg/L of Alfa fibres at pH 6.3. The adsorption selectivity order was Pb2+ > Cu2+ > Zn2+ with Pb2+ removal efficiencies up to 97.6%. The adsorption kinetics were best explained by a pseudo-second-order kinetic model. The experimental adsorption data fitted very well with the Langmuir isotherm model, and less well with the Freundlich and Temkin isotherm models. The maximum adsorption capacities were respectively 14.492, 11.904, and 8.695 mg/g for Pb2+, Cu2+, and Zn2+. The results of this study indicated that Alfa fibres could be used as effective adsorbent for the removal of Pb2+, Cu2+, and Zn2+ from aqueous solutions.

A survey on constructed wetland publications in the past three decades

Decentralised wastewater treatment systems, such as constructed wetlands, are becoming increasingly popular these days because they are more economical and cost-effective than conventional plants. The primary objective of this review paper is to determine the number of studies that have been conducted on constructed wetlands, specifically 'free water surface flow constructed wetlands', 'horizontal subsurface flow constructed wetlands', 'vertical subsurface flow constructed wetlands', and 'hybrid constructed wetlands'. In addition, the paper examines the status of research publications on constructed wetlands by country, author, and journal. Based on the review, it has been found that although constructed wetland technology is economical and cost-effective, it is still not among the top 10 effluent treatment methods. Compared to other constructed wetland systems, 'hybrid constructed wetlands' have received minimal attention. Based on the search results, 4639 documents published between 1989 and 2021 have been extracted from the online edition of SCI-EXPANDED, Web of Science. The documents associated with constructed wetlands are divided into eight main document types. Articles and proceedings papers are the most common document type, accounting for 93% of all publications, followed by reviews (4%), meeting abstracts (1.3%), corrections (0.56%), editorial materials (0.38%), news items (0.2%), letters (0.04%), and book reviews (0.02%).

Novel diaminoguanidine functionalized cellulose: synthesis, characterization, adsorption characteristics and application for ICP-AES determination of copper(II), mercury(II), lead(II) and cadmium(II) from aqueous solutions

In this study, the novel adsorbent diaminoguanidine-modified cellulose (DiGu.MC) was synthesized to extract mercury, copper, lead and cadmium ions from aqueous solutions and environmental water samples. The synthetic strategy involved oxidizing cellulose powder into dialdehyde cellulose (DAC) and reacting DAC with diaminoguanidine to create an imine linkage between the two reactants to form diaminoguanidine-modified cellulose (DiGu.MC). The structure and morphology of the adsorbent were studied using a variety of analytical techniques including Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) surface area measurements. Adsorption of mercury, copper, lead, and cadmium ions was optimized by examining the effects of pH, initial concentration, contact time, dose, temperature and competing ions. Under optimal adsorption conditions, the adsorption capacities of Cu²⁺, Hg²⁺, Pb²⁺, and Cd²⁺ were 66, 55, 70 and 41 mg g⁻¹, respectively. The adsorption isotherm is in very good agreement with the Langmuir isotherm model, indicating that a monomolecular layer is formed on the surface of DiGu.MC. The kinetics of adsorption are in good agreement with the pseudo-second kinetics model that proposes the chemical adsorption of metal ions via the nitrogen functional groups of the adsorbent. Thermodynamic studies have confirmed that the adsorption of heavy metals by DiGu.MC is exothermic and spontaneous. Regeneration studies have shown that the adsorbent can be recycled multiple times by removing metal ions with 0.2 M nitric acid. The removal efficiency for regeneration was over 99%. DiGu.MC is introduced as a unique adsorbent in removing mercury, copper, lead and cadmium with a simple synthetic strategy, with cheap starting materials, a unique chemical structure and fast adsorption kinetics leading to excellent removal efficiency and excellent regeneration. The mechanism of adsorption of the investigated heavy metals, is probably based on the chelation between the metal ions and the N donors of DiCu.MC.

Constructed wetlands as a sustainable technology for wastewater treatment with emphasis on chromium-rich tannery wastewater

Water scarcity is a major threat to agriculture and humans due to over abstraction of groundwater, rapid urbanization and improper use in industrial processes. Industrial consumption of water is lower than the abstraction rate, which ultimately produces large amounts of wastewater such as from tannery industry containing high concentration of chromium (Cr). Chromium-contaminated tannery industry wastewater is used for irrigation of food crops, resulting in food safety and public health issues globally. In contrast to conventional treatment technologies, constructed wetlands (CWs) are considered as an eco-friendly technique to treat various types of wastewaters, although their application and potential have not been discussed and elaborated for Cr treatment of tannery wastewater. This review briefly describes Cr occurrence, distribution and speciation in aquatic ecosystems. The significance of wetland plant species, microorganisms, various bedding media and adsorbents have been discussed with a particular emphasis on the removal and detoxification of Cr in CWs. Also, the efficiency of various types of CWs is elaborated for advancing our understanding on Cr removal efficiency and Cr partitioning in various compartments of the CWs. The review covers important aspects to use CWs for treatment of Cr-rich tannery wastewater that are key to meet UN's Sustainable Development Goals.

Palm Oil Fuel Ash-Based Eco-Friendly Concrete Composite: A Critical Review of the Long-Term Properties

Rapid global infrastructural developments and advanced material science, amongst other factors, have escalated the demand for concrete. Cement, which is an integral part of concrete, binds the various individual solid materials to form a cohesive mass. Its production to a large extent emits many tons of greenhouse gases, with nearly 10% of global carbon (IV) oxide (CO2) emanating from cement production. This, coupled with an increase in the advocacy for environmental sustainability, has led to the development of various innovative solutions and supplementary cementitious materials. These aims to substantially reduce the overall volume of cement required in concrete and to meet the consistently increasing demand for concrete, which is projected to increase as a result of rapid construction and infrastructural development trends. Palm oil fuel ash (POFA), an industrial byproduct that is a result of the incineration of palm oil wastes due to electrical generation in power plants has unique properties, as it is a very reactive materials with robust pozzolanic tendencies, and which exhibits adequate micro-filling capabilities. In this study, a review on the material sources, affecting factors, and durability characteristics of POFA are carefully appraised. Moreover, in this study, a review of correlated literature with a broad spectrum of insights into the likely utilization of POFA-based eco-friendly concrete composites as a green material for the present construction of modern buildings is presented.

Use and treatment of chicken feathers as a natural adsorbent for the removal of copper in aqueous solution

PURPOSE

Copper is a heavy metal that causes considerable deterioration to human health and ecosystems, so their elimination in water bodies is of great interest. Present investigation shows the efficiency of chicken feather as a natural adsorbent and its subsequent degradation in order to have an integral treatment and avoid the unconscious disposition.

METHODS

Optimal conditions of adsorption process were determined using the Response Surface Methodology (RSM)-Box-Behnken design (BBD) with three variables (pH, temperature and adsorbent dose). After that, the optimal conditions were used to analize the adsorption isotherms by Langmuir, Freundlich and Temkin models; also thermodynamics parameters Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were obtained. Finally, the biodegradation of the residue denominated "adsorbent-adsorbate" complex was evaluated through monitoring the soluble protein production, keratinolytic activity, ninhydrin positive products, sulfhydryl groups, and gravimetrically analysis.

RESULTS

The optimum conditions for the adsorption were 30°C and pH 3, the Langmuir model was better described the adsorption process at 30°C, while at 40°C was Temkin model. The chicken feather turned out a natural adsorbent competitive with respect to others used in the removal of copper in liquid systems; obtaining qmax of 7.84 and 11.48 mg/g at 30 and 40°C, respectively; it was also a favorable and spontaneous process. Finally the adsorbent used was degraded by a keratinolytic consortium.

CONCLUSIONS

In this study, chicken feather was used as a low cost adsorbent for copper efficiently and with the feasibility that the adsorbent can be biodegraded and release the metal.

Competitive and non-competitive zinc, copper and lead biosorption from aqueous solutions onto flax fibers

Competitive and non-competitive batch experiments were conducted on flax fibers to study Zn²⁺, Cu²⁺, and Pb²⁺ ions biosorption performance. Biosorption efficiency was dependent on contact time, pH, and biosorbent concentration. The results under competitive conditions were different from those obtained in non-competitive form. A high affinity of lead, with a selectivity sequence in general of Pb > Cu > Zn was observed. The biosorption data fitted very well the Langmuir model for lead in both types of solutions and for zinc and copper in the monometal form. The fit with the Freundlich model was not as successful, except for copper in the ternary system. Regarding zinc under competitive conditions, the sorption process was quite difficult and thus the equilibrium data could not fit well the adsorption models. The maximum adsorption capacities (mmol.kg^-1) were respectively 112, 122 and 71, for Pb, Cu and Zn in the single metal ion solution and 82, 57 and 8 only in the ternary, showing thus a high competition between metal ions when added simultaneously. Overall, lead could still be efficiently removed in spite of the presence of other ions while zinc would be overcome in the presence of lead and copper.

Design, Operation and Optimization of Constructed Wetland for Removal of Pollutant

Constructed wetlands (CWs) are affordable and reliable green technologies for the treatment of various types of wastewater. Compared to conventional treatment systems, CWs offer an environmentally friendly approach, are low cost, have fewer operational and maintenance requirements, and have a high potential for being applied in developing countries, particularly in small rural communities. However, the sustainable management and successful application of these systems remain a challenge. Therefore, after briefly providing basic information on wetlands and summarizing the classification and use of current CWs, this study aims to provide and inspire sustainable solutions for the performance and application of CWs by giving a comprehensive review of CWs' application and the recent development of their sustainable design, operation, and optimization for wastewater treatment. To accomplish this objective, thee design and management parameters of CWs, including macrophyte species, media types, water level, hydraulic retention time (HRT), and hydraulic loading rate (HLR), are discussed. Besides these, future research on improving the stability and sustainability of CWs are highlighted. This article provides a tool for researchers and decision-makers for using CWs to treat wastewater in a particular area. This paper presents an aid for informed analysis, decision-making, and communication. The review indicates that major advances in the design, operation, and optimization of CWs have greatly increased contaminant removal efficiencies, and the sustainable application of this treatment system has also been improved.

Enhanced Cd2+ and Zn2+ removal from heavy metal wastewater in constructed wetlands with resistant microorganisms

The bioaugmentation role of microbes is often impeded by heavy metal (HM) ions in constructed wetlands (CWs). To explore the interaction between microbes and HM ions, two identical CWs: an MCW (with resistant microorganisms) and a CCW (as control) were used in this study. Experiments analyzed static adsorption performance in a synthetic HM solution. The removal performance of Cd²⁺ and Zn²⁺ was further investigated in both CWs. The removal efficiencies (REs) of 81.92-99.56% and 74.05-98.79% were achieved for Cd²⁺ and Zn²⁺ in the adsorption study, respectively. Significantly higher REs of Cd²⁺ (99.60%), and Zn²⁺ (94.41%) were achieved in the MCW. The microbial community analysis revealed that the dominant genera were Serratia and Pseudomonas in the MCW. The subcellular analysis further demonstrated that the HMs bioaccumulated mainly in the cytomembrane and cell wall. These results indicate that CW with resistant microorganisms inoculated was an effective strategy for treating HMs wastewater.

Adsorption thermodynamics and kinetics of Advanced Green Environmental Media (AGEM) for nutrient removal and recovery in agricultural discharge and stormwater runoff

Recycled materials were used in three types of green sorption media for nutrient removal and possible recovery in high nutrient-laden agricultural discharge and stormwater runoff. The three types of green sorption media included in this comparative study were two new aluminum-based green environmental media (AGEM) and one existing iron-filings based green environmental media (IFGEM). The corresponding adsorption isotherm, thermodynamics, and kinetics models were simulated based on isotherm studies to determine their removal efficiency and potential for recovery of nitrate, phosphate, and ammonia when used as a soil amendment in crop fields or in a filter for water treatment. AGEM-2 exhibited the shortest contact time required to achieve nutrient removal above 80% with an average of 7 h, followed by AGEM-1 and IFGEM with 10.6 and 28 h, respectively. Natural soil was included as a control and exhibited minimal nutrient removal. Ammonia, which may be recovered as fertilizer for drop fields in a soil-water-waste nexus, was generated by all three green sorption media mixes, therefore indicating their potential for use as soil amendments in agricultural and forested land after engineering filter applications. The kinetics analysis indicated that nitrate adsorption follows pseudo-first-order kinetics, while phosphate adsorption follows pseudo-second-order kinetics. The Gibbs free energy indicated that most of the adsorption reactions proceeded as exothermic. Lastly, a few equilibrium models, including the Langmuir, Freundlich, First Modified Langmuir, Temkin, Jovanovic, and Elovich models, were ranked and three were selected for use with IFGEM, AGEM-1, and AGEM-2, respectively, as below: (1) Langmuir, (2) Freundlich, and (3) First Modified Langmuir, according to three indices.

Comprehensive evaluation of substrate materials for contaminants removal in constructed wetlands

Considerable number of studies have been carried out to develop and apply various substrate materials for constructed wetlands (CWs), however, there is a lack of method and model for comprehensive evaluation of different types of CWs substrates. To this end, this article summarized nearly all the substrate materials of CWs available in the literatures, including natural materials, agricultural/industrial wastes and artificial materials. The sources and physicochemical properties of various substrate materials, as well as their removal capacities for main water contaminants including nutrients, heavy metals, surfactants, pesticides/herbicides, emerging contaminants and fecal indicator bacteria (FIB) were comprehensively described. Further, a scoring model for the substrate evaluation was constructed based on likely cost, availability, permeability, reuse and contaminant removal capacities, which can be used to select the most suitable substrate material for different considerations. The provided information and constructed model contribute to better understanding of CWs substrate for readers, and help solve practical problems on substrates selection and CWs construction.

Constructed wetland microcosms as sustainable technology for domestic wastewater treatment: an overview

Constructed wetland microcosms (CWMs) are artificially designed ecosystem which utilizes both complex and ordinary interactions between supporting media, macrophytes, and microorganisms to treat almost all types of wastewater. CWMs are considered as green and sustainable techniques which require lower energy input, less operational and maintenance cost and provide critical ecological benefits such as wildlife habitat, aquaculture, groundwater recharge, flood control, recreational uses, and add aesthetic value. They are good alternatives to conventional treatment systems particularly for smaller communities as well as distant and decentralized locations. The pH, dissolved oxygen (DO), and temperature are the key controlling factors while several other parameters such as hydraulic loading rates (HLR), hydraulic retention time (HRT), diversity of macrophytes, supporting media, and water depth are critical to achieving better performance. From the literature survey, it is evaluated that the removal performance of CWMs can be improved significantly through recirculation of effluent and artificial aeration (intermittent). This review paper presents an assessment of CWMs as a sustainable option for treatment of wastewater nutrients, organics, and heavy metals from domestic wastewater. Initially, a concise note on the CWMs and their components are presented, followed by a description of treatment mechanisms, major constituents involved in the treatment process, and overall efficiency. Finally, the effects of ecological factors and challenges for their long-term operations are highlighted.

Recycling of aquaculture wastewater using charcoal based constructed wetlands

The competitive demand for water makes it a scarce resource for agricultural use. This necessitates wastewater reuse for irrigation and any other agricultural purpose, especially in developing countries where treatment of wastewaters is not a priority. The aim of this study was to evaluate the performance of a charcoal-based constructed wetland (CBCW) in treating aquaculture wastewater. Aquaculture wastewater from a Research Fishpond Farm was treated in a CBCW planted with Sacciolepsis africana and Commelina cyannae for 5 days retention time. Raw wastewater and the treated wastewater from the constructed wetland (CW) was sampled and the physicochemical parameters determined. The performance of the CW in treating aquaculture wastewater was conducted. The result showed that the CBCW was capable of removing 50% TSS, 88% COD, 93% BOD_5, and 100% nitrate nitrogen. The pH and DO of the wastewater before treatment and after treatment ranged from 6.68 to 6.91 and 4.13 to 6.30 mg/l, respectively. Thus, CWs have great potential for the treatment of aquaculture wastewater and prevention of environmental degradation through wastewater treatment, thereby solving the problem of water scarcity for agriculture for optimum food production.

Treatment of hypersaline hazardous landfill leachate using a baffled constructed wetland system: effect of granular packing media and vegetation

Constructed wetland is an engineered system that attains more attention as a feasible technology for the treatment of municipal landfill leachate. However, its feasibility for treatment of toxic, hazardous, and hypersaline leachate remains unexplored. This study aimed to investigate the feasibility of using a baffled constructed wetland (BCW) system for the treatment of hypersaline hazardous landfill leachate. Furthermore, the effects of granular packing media, toxicity, and hyper salinity conditions on the removal efficiency of COD fractions (CODt, CODs, and CODp), nitrogen, heavy metals, and coarse solids were extensively investigated. Our findings indicated that BCWs were highly effective in removing heavy metals particularly Cu²⁺, Mn²⁺, Fe²⁺, and Zn²⁺ and exhibited moderate efficiency for other contaminants (e.g. COD fractions, solids, and nitrogen species). Furthermore, use of a sand and gravel mixture for bed materials demonstrated higher performance over sand alone. However, we found that Phragmites australis is not tolerant enough to extreme toxicity and salinity conditions, and this reed could not survive for more than 27 and 33 days in sand BCW and sand/gravel BCW, respectively. Consequently, survivorship of reed and efficiency of treatment using vegetation were limited in the long-term operation with high salinity and toxicity conditions.

Adsorption of Cu2+, Pb2+, and Cd2+ onto oiltea shell from water

Agro-processing waste oiltea shell (OTS) has been previously proven effective in removing dye from water by adsorption. This study further evaluated its capability to adsorb heavy metals in aqueous solution. Adsorbent dosage, pH, ion concentration, temperature, and contact time were investigated in batch experiments. Pseudo-second order kinetic better described the adsorption process for the three ions. Langmuir equation was more suitable for Cu²⁺ and Cd²⁺, while Freundlich for Pb²⁺. The maximum adsorption capacity was 22.4 (Pb²⁺), 12.1 (Cu²⁺), and 14.2 mg/g (Cd²⁺), respectively. The adsorption was spontaneous and endothermic. Adsorption was then performed in column and Thomas model was fitted, based on which the maximum adsorption capacity was 7.42 (Cu²⁺), 4.17 (Pb²⁺), and 18.02 mg/g (Cd²⁺), respectively. High removal rate of metal ions and dye methylene blue was also achieved from their mixture solution. OTS is therefore a promising biosorbent in treating wastewater with organic and inorganic pollutants.

Sustainable Management and Successful Application of Constructed Wetlands: A Critical Review

Constructed wetlands (CWs) are affordable and reliable green technologies for the treatment of various types of wastewater. Compared to conventional treatment systems, CWs offer an environmental-friendly approach, are low cost, have fewer operational and maintenance requirements, and have a high potential for being applied in developing countries; particularly in small rural communities. However, the sustainable management and successful application of these systems remain a challenge. Therefore, after briefly giving basic information on wetlands and summarizing the classification and use of current CWs, this study aims to provide sustainable solutions for the performance and applications of CWs. To accomplish this objective, design and management parameters of CWs, including macrophyte species, media types, water level, hydraulic retention time (HRT), and hydraulic loading rate (HLR), are discussed. The current study collects and presents results of more than 120 case studies from around the world. This work provides a tool for researchers and decision-makers for using CWs to treat wastewater in a particular area. This study presents an aid for informed analysis, decision-making, and communication.

Global development of various emerged substrates utilized in constructed wetlands

Substrate selection is one of the key technical issues for constructed wetlands (CWs), which works for wastewater treatment based mainly on the biofilm principle. In recent years, many alternative substrates have been studied and applied in CWs, and a review is conducive to providing updated information on CW R&D. Based on the intensive research work especially over the last 10 years on the development of emerged substrates (except for the three conventional substrates of soil, sand, and gravel) in CWs, this review was made. The substrates are categorized depending on their main roles in pollutant removal as ion-exchange substrates, P-sorption substrates, and electron donor substrates. Among these, reuse of various waste products as substrates was suggested due to their competitive pollutant removal efficiency and minimized waste disposal. Regarding substrate development, future research on avoiding substrate clogging to extend their lifetime in CWs is needed.

A novel biosorbent prepared by immobilized Bacillus licheniformis for lead removal from wastewater

Magnetic polyving akohol (PVA) immobilized the endogenous bacterium Bacillus licheniformis with sodium alginate to get a novel biosorbent. The optimum preparation and adsorption conditions were studied. The optimal preparation conditions was the fraction of magnetic PVA was 9%, the fraction of sodium alginate was 0.8%, the fraction of microbial suspensions was 5% and the crosslinking time was 20 h. The best adsorption conditions were listed as follows: pH was 6, the biosorbent dosage was 0.7 g L^-1, the initial concentration of lead ions was 200 mg L^-1 and the optimal adsorption time was 12 h. The results of SEM and FTIR spectroscopy analysis displayed this novel biosorbents had good structure and the functional groups on the surface was abundant. The VSM analysis confirmed the novel biosorbents had good magnetic magnetization and were easily separated from aqueous medium. Under the optimum conditions, the removal rate of lead ions from waste water could reach 98%, the calculated maximum adsorption capacity could be up to 113.84 mg g^-1. The whole adsorption process was well fit by the pseudo-second order kinetic and it was also a Langmuir monolayer adsorption. The desorption experiments showed the biosorbent had good re-usability.

Removal of lead and bisphenol A using magnesium silicate impregnated palm-shell waste powdered activated carbon: Comparative studies on single and binary pollutant adsorption

In this work, palm shell waste powder activated carbon coated by magnesium silicate (PPAC-MS) were synthesized by the impregnation of magnesium silicate (MgSiO₃) using economical material (silicon dioxide powder) via mild hydrothermal approach for the first time. As an effective adsorbent, PPAC-MS simultaneously removes BPA and Pb(II) in single and binary mode. Surprisingly, PPAC-MS exhibited a homogeneous thin plate mesh-like structure, as well as meso- and macropores with a high surface area of 772.1m²g^-1. Due to its specific morphological characteristics, PPAC-MS had adsorption capacities of Pb(II) as high as 419.9mgg^-1 and 408.8mgg^-1 in single mode and binary mode based on Freudliuch isotherm model while those for BPA by PPAC-MS were 168.4mgg^-1 and 254.7mgg^-1 for single mode and binary modes corresponding to Langmuir isotherm model. Experiment results also indicated that the synergistic removal of BPA occurred because the precipitation process of Pb(II) leads to the co-precipitation of BPA with Pb(OH)₂ compound. PPAC-MS showed a good reusability for 5 regeneration cycles using Mg(II) solution followed by thermal treatment. Overall, PPAC-MS has a high potential in the treatment process for wastewater containing both toxic heavy metals and emerging pollutants due to its high sorption capacities and reusability.

Surface adsorption of poisonous Pb(II) ions from water using chitosan functionalised magnetic nanoparticles

In this study, chitosan functionalised magnetic nano-particles (CMNP) was synthesised and utilised as an effective adsorbent for the removal of Pb(II) ions from aqueous solution. The experimental studies reveal that adsorbent material has finer adsorption capacity for the removal of heavy metal ions. Parameters affecting the adsorption of Pb(II) ions on CMNP, such as initial Pb(II) ion concentration, contact time, solution pH, adsorbent dosage and temperature were studied. The adsorption equilibrium study showed that present adsorption system followed a Freundlich isotherm model. The experimental kinetic studies on the adsorption of Pb(II) ions exhibited that present adsorption process best obeyed with pseudo-first order kinetics. The maximum monolayer adsorption capacity of CMNP for the removal of Pb(II) ions was found to be 498.6 mg g-1. The characterisation of present adsorbent material was done by FTIR, energy disperse X-ray analysis and vibrating sample magnetometer studies. Thermodynamic parameters such as Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) have declared that the adsorption process was feasible, exothermic and spontaneous in nature. Sticking probability reported that adsorption of Pb(II) ions on CMNP was favourable at lower temperature and sticking capacity of Pb(II) ions was very high.

Chelating magnetic nanocomposite for the rapid removal of Pb(ii) ions from aqueous solutions: characterization, kinetic, isotherm and thermodynamic studies

Fe₃O₄@GMA–AAm nanocomposite as a novel adsorbent with high adsorption capacity for rapid removal of Pb²⁺ from aqueous media was synthesized.

Characterizing phosphorus removal from polluted urban river water by steel slags in a vertical flow constructed wetland

Phosphorus (P) removal in constructed wetlands (CWs) is often low unless special substrates with high sorption capacities are used. However, the use of special substrates in vertical flow (VF) CWs has not been proved to enhance P sorption. Thus, two VF wetlands were designed to evaluate the potential for enhanced P removal from polluted urban river water, one with slag as substrate and the other as a control with gravel as substrate. Findings from batch experiments showed P sorption capacities of 3.15 gP/kg and 0.81 gP/kg, respectively, for steel slag and gravel. Different organic matter fractions played different roles in P sorption, the effects of which were significant only at high concentrations. Over a 220 days' operation, the VF-slag removed 76.0% of the influent total phosphorus (TP) at 0.159 g/m(2)·d and PO4-P of 70.9% at 0.063 g/m(2)·d, whereas the VF-gravel removed 65.0% at 0.136 g/m(2)·d and 48.6% at 0.040 g/m(2)·d, respectively. Therefore, the merit of using a steel slag substrate in VF wetlands can be significant for the removal of PO4-P.

Mechanical Properties of Short Fiber and Non-Woven Kenaf Reinforced Polypropylene Composites: Effects of Oil Palm Shell Powder Addition

Kenaf is renowned for its renewable and environmental friendly properties. Recently, there is an interest on the application of kenaf-based material for high-end uses such as in the automotive industry. In this study, the effects of oil palm shell powder (OPSP) addition on the mechanical properties of kenaf reinforced polypropylene (PP) composites are investigated. Two types of kenaf are used in this study, i.e., non-woven and short fiber. For the former, the composites are fabricated by hot pressing a non-woven kenaf sheet sandwiched by thin PP sheets which have been mixed beforehand with OPSP by using internal mixer. For the latter, kenaf short fibers are mixed with OPSP using internal mixer, then compression molded by using hot press. In general, addition of OPSP was effective to improve the mechanical properties of non-woven kenaf reinforced PP composites, while the kenaf short fiber reinforced PP showed varied results. Composites reinforced with non-woven kenaf showed a larger increase in tensile strength, elongation at break and impact strength with the OPSP addition than those reinforced by kenaf short fibers.

A review on the sustainability of constructed wetlands for wastewater treatment: Design and operation

Constructed wetlands (CWs) have been used as a green technology to treat various wastewaters for several decades. CWs offer a land-intensive, low-energy, and less-operational-requirements alternative to conventional treatment systems, especially for small communities and remote locations. However, the sustainable operation and successful application of these systems remains a challenge. Hence, this paper aims to provide and inspire sustainable solutions for the performance and application of CWs by giving a comprehensive review of CWs' application and the recent development on their sustainable design and operation for wastewater treatment. Firstly, a brief summary on the definition, classification and application of current CWs was presented. The design parameters and operational conditions of CWs including plant species, substrate types, water depth, hydraulic load, hydraulic retention time and feeding mode related to the sustainable operation for wastewater treatments were then discussed. Lastly, future research on improving the stability and sustainability of CWs were highlighted.

Modelling of arsenic retention in constructed wetlands

A new model was developed in order to simulate the most significant arsenic retention processes that take place in constructed wetlands (CWs) treating high arsenic waters. The present contribution presents the implementation phases related to plants (arsenic uptake and accumulation, root arsenic adsorption, and root oxygen release), showing the first simulation results of the complete model. Different approaches with diverse influent configurations were simulated. In terms of total arsenic concentrations in effluent, the simulated data closely matched the data measured in all evaluated cases. The iron and arsenic species relationships, and the arsenic retention percentages obtained from simulations, were in agreement with the experimental data and literature. The arsenic retention efficiency increased whenever a new phase was implemented, reaching a maximum efficiency range of 85-95%. According to the quality of the obtained results, it can be considered that the implementation of all steps of RCB-ARSENIC provided reasonably good response values.

Sulfonated modification of cotton linter and its application as adsorbent for high-efficiency removal of lead(II) in effluent

Sulfonated modification of cotton linter and its novel application as adsorbent for Pb(2+) in effluent were investigated. Results show that sulfonated cotton linter (SCL) has strong adsorbability for Pb(2+), more than 85% of Pb(2+) can be removed at lower Pb(2+) concentration (<20 mg/L). Its adsorbability for Pb(2+) is related to effluent pH, temperature, and initial Pb(2+) concentration. The adsorption process can reach equilibrium within 8 min, which can be described through the pseudo-second-order kinetic model. The adsorption isotherm is closely fitted with the Temkin isotherm model, which suggests that the adsorption of Pb(2+) on SCL can be regarded as chemical adsorption. The adsorption process of Pb(2+) on SCL is non-spontaneous and endothermic, based on the value of Gibbs free energy and enthalpy. Compared with commercial activated carbon, SCL is simple to prepare and does not require any special technology.