Biological decolorization of malachite green by Deinococcus radiodurans R1

Efficient Biological Decolorization of Malachite Green by Deinococcus wulumuqiensis R12: Process Optimization and Degradation Pathway Analysis

Malachite green (MG) is a toxic triphenylmethane dye widely used in industry, as well as a controversial antimicrobial in aquaculture, leading to environmental concerns. In this study, the conditions for the decolorization of MG by Deinococcus wulumuqiensis R12 were optimized. Under the optimized conditions, a degradation efficiency of 99.30% was achieved for 200 mg/L MG within 30 min, with an initial biomass concentration of 5.5 g/L at 32 °C and pH 5.0. When the initial concentration of MG was increased to 1 g/L, the degradation efficiency surpassed 97% after 2.5 h. Analytical techniques, including UV-VIS, FTIR, GC-MS, and LC-MS analyses revealed that the degradation products included desmethyl-malachite green, di-desmethyl-malachite green, 4-(dimethylamino)benzophenone, and 4-(methylamino)benzophenone, indicating that the MG degradation mechanism of R12 was based on oxidation and demethylation processes. Furthermore, microbial assays confirmed that the byproducts of MG degradation by R12 are much less toxic than the parent compound, indicating the potential of Deinococcus wulumuqiensis R12 as an effective bioremediation agent for MG-contaminated environments.

Biodegradation of malachite green by Pleurotus eryngii: a study on decolorization, mechanism, toxicity, and enzyme

The purpose of this study was to investigate the biodegradation of malachite green (MG) by Pleurotus eryngii via decolorization. This study also explored the possible mechanisms and toxicity. The results indicated that this fungus exhibited strong decolorizing potential. MG degradation based on UPLC-TOF-Triple-MS analysis revealed the formation of intermediates such as 4-(dimethylamino)benzophenone, 4-(methylamino)benzophenone, and 4-(dimethylamino)phenol. Furthermore, a significant reduction in the toxicity of the degradation products was observed using the zebrafish animal model. A newly discovered dye-decolorizing peroxidase (DyP-PE) from P. eryngii was amplified, cloned, and expressed. The purified 56.4 kDa DyP-PE strongly decolorized MG, suggesting potentially application in the bioremediation of MG pollution. Thus, the DyP-PE derived from P. eryngii may contribute to the degradation of MG.

Ecofriendly Approach on the Removal of Reactive Orange 107 from Aqueous Solutions Using Cladophora Species as a Novel Biosorbent

The efficiency of Cladophora species for the removal of Reactive Orange 107 (RO107) from the aqueous solution was evaluated through batch adsorption studies by optimising various process parameters such as pH (3-8), dye concentration (100-500 mg/l), biosorbent concentration (100-500 mg/l), temperature (25-45 °C) and contact time (12-108 h). The results revealed that the optimum conditions for RO107 decolourisation (87%) was found on 72 h of incubation with 100 mg/l dye concentration amended with 200 mg/l biosorbent at pH 6 at 25 °C. The mechanism of dye adsorption was evaluated using isotherms, kinetics and thermodynamic models. The experimental data fitted well with Langmuir isotherm and pseudo-second-order kinetic models. Thermodynamic studies revealed that the adsorption process was endothermic, spontaneous and feasible in nature. Recovery of RO107 from the Cladophora sp. was maximum when 0.1 M HNO3 was used as an eluent. UV-Visible, FT-IR and SEM analyses reveal the interaction between the biosorbent-adsorbate and confirm the process of decolourisation by Cladophora sp. In order to evaluate the nature of the untreated and treated dye solutions, toxicological studies were conducted and the results revealed that the treated dye solution was non- toxic as compared with untreated dye solution. The results of the docking study proved that there was a substantial binding energy between RO107 and the protein (Cytochrome C6) of Cladophora sp. Hence, Cladophora sp. proves to be a promising biosorbent to decolourise RO107 and its potential can be explored in the textile sectors.

Dynamics of the role of LacMeta laccase in the complete degradation and detoxification of malachite green

Laccases highlight for xenobiotic bioremediation, as well as application in the fine chemical, textile, biofuel and food industries. In a previous work, we described the preliminary characterization of laccase LacMeta, a promising enzyme for the bioremediation of dyes, able to decolorization malachite green (MG), trypan blue, methylene blue. Here we demonstrate that LacMeta is indeed suitable for the complete degradation and detoxification of MG dye, not just for its discoloration, since some works show false positives due to the formation of colorless intermediates such as leucomalachite. The optimal pH and temperature parameters of LacMeta were 5.0 and 50 °C, respectively (MG as substrate). LacMeta was tolerant of up to 10 mmol L^- 1 EDTA (82%) and up to 5% (V/V) acetone (91%) and methanol (71%), while SDS promoted severe inhibition. For ions, a high tolerance to cobalt, zinc, manganese, and calcium (10 mmol L^- 1) was also observed (> 90%). Even under high-salinity conditions (1 mol L^- 1 NaCl), the residual bleaching activity of the dye remained at 61%. Furthermore, the bleaching product of MG did not inhibit the germination of sorghum and tomato seeds and was inert to the vegetative structures of the germinated seedlings. Additionally, this treatment effectively reduced the cytotoxic effect of the dye on microorganisms (Escherichia coli and Azospirillum brasilense), which can be explained by H-NMR spectral analysis results since LacMeta completely degraded the peak signals corresponding to the aromatic rings in the dye, demonstrating extreme efficiency in the bioremediation of the xenobiotic at high concentrations (50 mg L^- 1).

Decolorization of azo dyes by a novel aerobic bacterial strain Bacillus cereus strain ROC

Synthetic dyes are widely used as colorant compounds in various industries for different purposes. Among all the dyestuffs, azo dyes constitute the largest and the most used class of dyes. These dyes and their intermediate products are common contaminants of ground water and soil in developing countries. Biological methods have been found to be promising for the treatment and degradation of these compounds. In the present study, we focused on the biological removal of azo dyes (Reactive orange 16 and Reactive black 5) under aerobic conditions using an indigenous bacterial strain isolated from contaminated industrial areas. The bacterial isolate was identified as Bacillus cereus strain ROC. Degradation experiments under agitation with both free and immobilized cells indicates that this strain degrades both azo- dyes in 5 days. The immobilized cells were more proficient than their free cell counterparts. The toxicity of the biotransformation products formed after decolorization were assessed by conducting bacteriotoxic and phytotoxic assays. All the toxicity assays indicate that the dyes’ degraded products were non-toxic in nature, as compared to the dyes themselves. The kinetics of the azo dyes’ degradation was also studied at various initial concentration ranges from 50 mg/L to 250 mg/L by growth independent kinetic models. Zero-order kinetics were fit to the experimental data, producing values of least squares regression (R2) greater than 0.98, which indicates that the bacterial strain degrades both dyes by co-metabolism rather than utilizing them as sole energy source. These results indicate that the Bacillus cereus ROC strain has great potential to degrade dye-contaminated water and soil.

Biodegradation of azo dye-containing wastewater by activated sludge: a critical review

The effluent from the textile industry is a complex mixture of recalcitrant molecules that can harm the environment and human health. Biological treatments are usually applied for this wastewater, particularly activated sludge, due to its high efficiency, and low implementation and operation costs. However, the activated sludge microbiome is rarely well-known. In general, activated sludges are composed of Acidobacteria, Bacillus, Clostridium, Pseudomonas, Proteobacteria, and Streptococcus, in which Bacillus and Pseudomonas are highlighted for bacterial dye degradation. Consequently, the process is not carried out under optimum conditions (treatment yield). Therefore, this review aims to contextualize the potential environmental impacts of azo dye-containing wastewater from the textile industry, including toxicity, activated sludge microbiome identification, in particular using the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) as a novel, rapid and accurate strategy for the identification of activated sludge microbiome (potential to enhance treatment yield).

Microbial degradation, spectral analysis and toxicological assessment of malachite green by Streptomyces chrestomyceticus S20

Malachite green (MG), a triphenylmethane dye is extensively used for coloring silk, aquaculture and textile industries, it has also has been reported toxic to life forms. This study aimed to investigate the biodegradation potential of MG by actinobacteria. The potent actinobacterial strain S20 used in this study was isolated from forest soil (Sabarimala, Kerala, India) and identified as Streptomyces chrestomyceticus based on phenotype and molecular features. Strain S20 degraded MG up to 59.65 ± 0.68% was studied in MSM medium and MG (300 mg l^-1) and degradation was increased (90-99%) by additions of 1% glucose and yeast extract into the medium at pH 7. The treated metabolites from MG by S20 characterized by FT-IR and GC-MS. The results showed MG has been degraded into nontoxic compounds evaluated by (1) phytotoxic assay on Vigna radiata, (2) microbial toxicity on Staphylococcus aureus, Bacillus subtilis, Micrococcus luteus, Streptococcus sp. and Escherichia coli, (3) cytotoxicity assay in a human cell line (MCF 7). The toxicity studies demonstrated that the byproducts from MG degradation by S. chrestomyceticus S20 were no toxic to plants and microbes and less toxic to human cells as compared to the parent MG. Perhaps this is the first work reported on biodegradation of MG by S. chrestomyceticus which could be a potential candidate for the removal of MG from various environments.

Bioremediation of malachite green by cyanobacterium Synechococcus elongatus PCC 7942 engineered with a triphenylmethane reductase gene

Malachite green is a carcinogenic dye that has been detected in fish tissues and freshwater. Here we evaluated the malachite green decoloring ability of a photoautotrophic cyanobacterium, Synechococcus elongatus PCC 7942 (Synechococcus), that lives in freshwater. Results show that 99.5% of the dye was removed by Synechococcus through bioabsorption and bioaccumulation; however, the dye was not degraded or chemically modified. Next, we established an engineered Synechococcus strain to degrade the dye after uptake. The triphenylmethane reductase gene katmr was heterologously expressed, resulting in high production of a soluble recombinant protein. The engineered strain showed advanced decoloring abilities at a low cell density and in stressful environments. It degraded malachite green into the smaller molecules 4-methylaminobenzoic acid and 4-hydroxyl-aniline. After treatment with the engineered cyanobacterium, the growth of wheat seeds was fully recovered in the presence of malachite green. These results demonstrate the potential application of the engineered Synechococcus as a photosynthetic cell factory for the removal of malachite green from wastewater.

Functionalized Gold and Silver Bimetallic Nanoparticles Using Deinococcus radiodurans Protein Extract Mediate Degradation of Toxic Dye Malachite Green

Background

Biodegradation of toxic organic dye using nanomaterial-based microbial biocatalyst is an ecofriendly and promising technique.

Materials and Methods

Here, we have investigated the novel properties of functionalized Au-Ag bimetallic nanoparticles using extremophilic Deinococcus radiodurans proteins (Drp-Au-AgNPs) and their degradation efficiency on the toxic triphenylmethane dye malachite green (MG).

Results and Discussion

The prepared Drp-Au-AgNPs with an average particle size of 149.8 nm were capped by proteins through groups including hydroxyl and amide. Drp-Au-AgNPs demonstrated greater degradation ability (83.68%) of MG than D. radiodurans cells and monometallic AuNPs. The major degradation product was identified as 4-(dimethylamino) benzophenone, which is less toxic than MG. The degradation of MG was mainly attributed to the capping proteins on Drp-Au-AgNPs. The bimetallic NPs could be reused and maintained MG degradation ability (>64%) after 2 cycles.

Conclusion

These results suggest that the easily prepared Drp-Au-AgNPs have potential applications as novel nanomedicine for MG detoxification, and nanomaterial for biotreatment of a toxic polyphenyl dye-containing wastewater.

New nano-biomaterials for the removal of malachite green from aqueous solution via a response surface methodology

The development of new biomaterials for the remove of organic contaminants from wastewater has attracted much attention over the few past years. One of the most cost-effective approaches is to produce new high value biomaterials from low value solid agricultural biowastes. In this work, sugarcane bagasse and agricultural waste rich in reducing sugars, acted as both a green bioreductant for graphene oxide (GO) and a sustainable supporter for the immobilization of Burkholderia cepacia. Therefore, this new biomaterial which contained both reduced graphene oxide (RGO) and Burkholderia cepacia, was cable of initial adsorption of malachite green (MG) and its subsequent biodegradation. After 60 h, immobilized Burkholderia cepacia degraded more MG (98.5%) than a cell cultured Burkholderia cepacia (87.7%) alone. Raman spectroscopy confirmed that GO was successfully reduced by bagasse and that consequently a composite (B-RGO) was prepared. SEM indicated that Burkholderia cepacia was well immobilized and kinetics studies showed that the adsorption of MG onto the developed composite fitted a pseudo-second order kinetics model (R² > 0.99). Biodegradation of MG, was confirmed by the detection of appropriate degradation products such as N, N-dimethylaniline and 4-(Dimethylamino) benzophenone using GC-MS, UV and FT-IR, and via best fit first-order biodegration kinetics. Furthermore, a response surface methodology (RSM) was applied to the removal process by varying four independent parameters using a Box-Behnken design (BBD). Optimum MG removal (99.3%) was achieved at 31.5 °C, with an initial MG concentration of 114.5 mg L^-1, initial pH of 5.85, and an adsorbent dosage of 0.11 g L ^-1. The excellent removal efficiency indicated that agricultural waste derived reduced graphene oxide bio-adsorbents have significant potential for the removal of dyes such as MG from industrial wastewaters.

Evaluation of fluoride bioremediation and production of biomolecules by living cyanobacteria under fluoride stress condition

Application of microalgae for defluoridation has gained interest in recent years. In the present study, bioremediation of fluoride using living cyanobacteria, Starria zimbabweensis, collected from wastewater of coke-oven effluent treatment plant, Durgapur, India, has been investigated. Initially, the cyanobacterial strain was grown in BG11 medium at 25°C, 45μmol/m²/s irradiation in 18h: 6h light:dark cycle in an algal incubator. Samples were withdrawn after 2 days interval and analyzed for its dry biomass and lipid content. Optimum inoculum size of 10% and age of 16th day were assessed based on maximum dry biomass (9.307 ± 0.01g/L) and lipid (244.05 ± 0.02mg/L) production. SEM-EDX and FTIR studies of both native and fluoride treated biomass were done to emphasize the changes. During kinetic study of defluoridation, initial fluoride concentration was varied in the range of 10-50mg/L. Maximum fluoride removal (66.6 ± 0.11%) and dry biomass (18.19 ± 0.12g/L) were obtained at 10mg/L fluoride concentration using 10% of 16th day's inoculum. Biomass and lipid content were found to increase 2 and 4 folds, respectively under fluoride stress condition. Furthermore, chlorophyll, carbohydrate and protein content of the biomass were also compared between control and fluoride contaminated conditions. Fatty Acid Methyl Ester (FAME) analysis was done using Gas Chromatography (GC) to compare the lipid profile of native and fluoride loaded strain.

Adsorption removal of malachite green dye from aqueous solution

In this review, the state of the art on the removal of malachite green dye from aqueous solution using adsorption technique is presented. The objective is to critically analyze different adsorbents available for malachite green dye removal. Hence, the available recent literature in the area is categorized according to the cost, feasibility, and availability of adsorbents. An extensive survey of the adsorbents, derived from various sources such as low cost biological materials, waste material from industry, agricultural waste, polymers, clays, nanomaterials, and magnetic materials, has been carried out. The review studies on different adsorption factors, such as pH, concentration, adsorbent dose, and temperature. The fitting of the adsorption data to various models, isotherms, and kinetic regimes is also reported.

Malachite green decolorization by the filamentous fungus Myrothecium roridum--Mechanistic study and process optimization

The filamentous fungus Myrothecium roridum isolated from a dye-contaminated area was investigated in terms of its use for the treatment of Malachite green (MG). The mechanisms involved in this process were established. Peroxidases and cytochrome P-450 do not mediate MG elimination. The laccase of M. roridum IM 6482 was found to be responsible for the decolorization of 8-11% of MG. Thermostable low-molecular-weight factors (LMWF) resistant to sodium azide were found to be largely involved in dye decomposition. In addition, MG decolorization by M. roridum IM 6482 occurred in a non-toxic manner. Data from antimicrobial tests showed that MG toxicity decreased after decolorization. To optimize the MG decolorization process, the effects of operational parameters (such as the medium pH and composition, process temperature and culture agitation) were examined. The results demonstrate that M. roridum IM 6482 may be used effectively as an alternative to traditional decolorization agents.

Biotransformation of Direct Blue 1 by a moderately halophilic bacterium Marinobacter sp. strain HBRA and toxicity assessment of degraded metabolites

The ability of halophiles to survive in the extreme salt concentrations has gained them the importance of being used in the treatment of industrial waste waters. A moderately halophilic bacterial strain with the ability to degrade the complex azo dye Direct Blue-1 (DB-1) was isolated from sea water and identified as Marinobacter sp. strain HBRA. Complete decolorization of DB-1 (100 mg L(-1)) was achieved in 6h at 37 °C, pH 8 and with 70 g L(-1) NaCl. Decolorization was analyzed by UV-vis spectrophotometer. The FT-IR spectrum revealed that Marinobacter sp. strain HBRA specifically targeted azo bond (NN) at 1631 cm(-1) to break down Direct Blue-1. Formation of metabolites at different retention times in HPLC indicated degradation. Biotransformation pathway for DB-1 was proposed based on LC-MS. Phytotoxicity study revealed the less toxic nature of the metabolites compared to the dye. Genotoxicity with Allium cepa confirmed the cytotoxic nature of DB-1 by inducing several chromosomal abnormalities compared to the negligible effects of degraded metabolites. The current study is the first report on the detoxification of DB-1 by Marinobacter sp. strain HBRA.