Energy conversion of biomass crops and agroindustrial residues by combined biohydrogen/biomethane system and anaerobic digestion

Insight into furfural-tolerant and hydrogen-producing microbial consortia: Mechanism of furfural tolerance and hydrogen production

Furfural-tolerant and hydrogen-producing microbial consortia were enriched from soil, with hydrogen production of 259.84 mL/g-xylose under 1 g/L furfural stress. The consortia could degrade 2.5 g/L furfural within 24 h in the xylose system, more efficient than in the sugar-free system. Despite degradation of furfural to furfuryl alcohol, the release of reactive oxygen species and lactate dehydrogenase was also detected, suggesting that furfuryl alcohol is also a potential inhibitor of hydrogen production. The butyrate/acetate ratio was observed to decrease with increasing furfural concentration, leading to decreased hydrogen production. Furthermore, microbial community analysis suggested that dominated Clostridium butyricum was responsible for furfural degradation, while Clostridium beijerinckii reduction led to hydrogen production decrease. Overall, the enriched consortia in this study could efficiently degrade furfural and produce hydrogen, providing new insights into hydrogen-producing microbial consortia with furfural tolerance.

Biohythane: a Potential Biofuel of the Future

Today, the world is becoming more dependent on fossil fuels. The major drawbacks of these non-renewable energy resources include an extreme environmental pollution and an extinction threat. Several technologies including microalgal biodiesel production, biomass gasification, and bioethanol production have been explored for the generation of renewable energy especially, biofuels. One such promising research has been carried out in the generation of biohythane which has the potential to become an alternative fuel to the existing non-renewable ones. It has been reported that biohydrogen can be produced from organic wastes or agricultural feedstocks with the help of acidogens. Dark fermentation can be carried out by acidogens to produce biohydrogen under anaerobic conditions by utilizing lignocellulosic biomass or sugarcane feedstocks in the absence of light. The spent medium contains volatile short-chain fatty acids like acetate, butyrate, and propionate that can serve as substrates for acetogenesis followed by methane biosynthesis by methanogens. Therefore, the sequential two-stage anaerobic digestion (AD) involves a production of biohydrogen followed by the biosynthesis of methane. This combined process is termed as a single eponym "Biohythane" (hydrogen + methane). Several studies have demonstrated about the effectiveness of biofuel, and it is believed to have a greater energy recovery, environmental friendliness, and shorter fermentation time. Biohythane can serve as an alternative future green biofuel and solve the present energy crisis in India as well as the entire world.

Emerging trends and advances in valorization of lignocellulosic biomass to biofuels

Sustainable technologies pave the way to address future energy demand by converting lignocellulosic biomass into fuels, carbon-neutral materials, and chemicals which might replace fossil fuels. Thermochemical and biochemical technologies are conventional methods that convert biomass into value-added products. To enhance biofuel production, the existing technologies should be upgraded using advanced processes. In this regard, the present review explores the advanced technologies of thermochemical processes such as plasma technology, hydrothermal treatment, microwave-based processing, microbial-catalyzed electrochemical systems, etc. Advanced biochemical technologies such as synthetic metabolic engineering and genomic engineering have led to the development of an effective strategy to produce biofuels. The microwave-plasma-based technique increases the biofuel conversion efficiency by 97% and the genetic engineering strains increase the sugar production by 40%, inferring that the advanced technologies enhances the efficiency. So understanding these processes leads to low-carbon technologies which can solve the global issues on energy security, the greenhouse gases emission, and global warming.

Estimating the potential of biohydrogen production and carbon neutralization contribution from crop straw

In order to achieve the carbon neutrality goal set by Chinese government, the potential contribution of hydrogen production from crop residues by microbial fermentation technology and Greenhouse gas (GHGs) reduction have been studied. Firstly, the annual yield of crop straw was estimated according to crop yield and grass grain ratio, and then the grey model GM (1, 1) was applied to predict the crop residues resources available for hydrogen production in various provinces in China in 2021. The results showed that the maximum resource of straw being available for hydrogen production is about 4.54 × 10⁸ t, corresponding to 1.31 × 10¹¹ m³ of hydrogen, the energy carried by the obtained hydrogen was 73 % and 1.15 times than the energy of national civil natural gas consumption and energy of transportation gasoline consumption, respectively. The potential reduction of greenhouse gas emission was 2.42 × 10⁸ t/a CO₂-eq, representing 2.4 % of GHGs emissions.

Hydrogen Production from Enzymatic Hydrolysates of Alkali Pre-Treated Giant Reed (Arundo donax L.)

The perennial rhizomatous grass giant reed (Arundo donax L.) can be exploited to produce hydrogen by dark fermentation. This implies a high availability of simple sugars, like glucose and xylose, and, thus, a pre-treatment is necessary to remove lignin and expose the holocellulose to enzymatic attack. This study aimed at evaluating the hydrogen production from giant reed hydrolysates. Giant reed dry meal was pre-treated with diluted NaOH (1.2% weight/weight), then the solid fraction was separated from the alkaline black liquor by filtration, enzymatically hydrolyzed with a cellulase blend (Cellic CTec2), and fermented in mesophilic batch conditions with a microbial consortium derived from pig slurry. The impact on hydrogen yield of initial pH was evaluated by comparing the hydrogen production from hydrolysates with not adjusted (5.3) or adjusted initial pH (8.7) using NaOH or alkaline black liquor. The highest hydrogen yield, 2.0 mol/mol of hexoses, was obtained with alkaline initial pH 8.7, regardless of how the pH adjustment was managed. The yield was 39% higher than that obtained in reactors with initial pH 5.3. In conclusion, thermo-alkaline pre-treatment followed by enzymatic saccharification and initial pH adjustment at 8.7 with the black liquor remaining after pre-treatment is a promising strategy to produce hydrogen from giant reeds in dark fermentation.

Review and perspectives of enhanced volatile fatty acids production from acidogenic fermentation of lignocellulosic biomass wastes

Lignocellulosic biomass wastes are abundant resources that are usually valorized for methane-rich biogas via anaerobic digestion. Conversion of lignocellulose into volatile fatty acids (VFA) rather than biogas is attracting attention due to the higher value-added products that come with VFA utilization. This review consolidated the latest studies associated with characteristics of lignocellulosic biomass, the effects of process parameters during acidogenic fermentation, and the intensification strategies to accumulate more VFA. The differences between anaerobic digestion technology and acidogenic fermentation technology were discussed. Performance-enhancing strategies surveyed included (1) alkaline fermentation; (2) co-digestion and high solid-state fermentation; (3) pretreatments; (4) use of high loading rate and short retention time; (5) integration with electrochemical technology, and (6) adoption of membrane bioreactors. The recommended operations include: mesophilic temperature (thermophilic for high loading rate fermentation), C/N ratio (20-40), OLR (< 12 g volatile solids (VS)/(L·d)), and the maximum HRT (8-12 days), alkaline fermentation, membrane technology or electrodialysis recovery. Lastly, perspectives were put into place based on critical analysis on status of acidogenic fermentation of lignocellulosic biomass wastes for VFA production.

Tangerine, banana and pomegranate peels valorisation for sustainable environment: A review

Over the last decade the world has been generating a high quantity of tangerine peel waste (TPW), pomegranate peel waste (PPW) and banana peel waste (BPW). These peels have several economic benefits but there is mismanagement or inappropriate valorisation that could present risks to environment and public health. In the current review, we discussed the use of TPW, PPW and BPW directly for animal feed, soil fertilization, specific compost production and bio-adsorbent. We also discussed the valorisation of these peels for manufacturing the value-added products including enzymes, essential oil and other products that can be used in human food, in medical and cosmetic industry. Additionally, recent studies concerning the valorisation of these peels by biorefinery for bioethanol, biogas and biohydrogen production have been discussed. In the same context some other recent studies about valorisation of microorganisms isolated from these peels for medical, agronomic and industrial interests have been also discussed.

Effect of alkaline pretreatment on photo-fermentative hydrogen production from giant reed: Comparison of NaOH and Ca(OH)2

Giant reed was the first time used for photo-fermentative hydrogen production with HAU-M1 bacteria. Effects of NaOH and Ca(OH)₂ pretreatments of giant reed on structural changes, enzymatic digestibility, hydrogen production, and energy conversion efficiency were evaluated. Compared to Ca(OH)₂ pretreatment, NaOH pretreatment removed more dry matter and lignin at the same loading. The highest glucose yield (44.9%) of NaOH pretreatment was 1.74-fold higher than that of Ca(OH)₂ pretreatment. 20% NaOH pretreated giant reed biomass achieved the highest hydrogen yield (98.3 mL/g TS), which was 20% and 70% higher than the highest level of Ca(OH)₂ pretreated (20% Ca(OH)₂) and untreated giant reed, respectively. Only giant reed biomass pretreated with 20% NaOH resulted in a significant (p < 0.05) increase (25%) in energy conversion efficiency.

Pyrolysis and combustion kinetics of lignocellulosic biomass pellets with calcium-rich wastes from agro-forestry residues

The pyrolysis and combustion kinetics of biomass pellets (i.e., rice husk, herb residue, and wood residue) with the calcium-rich wastes (i.e., CaO, CaCO_3, and eggshell) from agro-forestry residues were comparatively studied. During pyrolysis or combustion of biomass, the Ca-rich wastes could slightly influence the decomposition rate in the stage of devolatilization at relatively lower temperatures (e.g., <400 °C). However, the lignin decomposition and the char combustion were obviously influenced by the calcium-based catalysis at higher temperatures (>700 °C). Particularly, the eggshell had a lowest activation energy in the stage of char combustion. The presence of alkali and alkaline-earth metals (AAEMs) in the eggshells might have positive effects on volatile and char combustion. During the combustion, the decomposition temperatures of CaCO₃ and eggshell were decreased, thereby favoring to uptake CO₂. Furthermore, by identifying the small molecular products, it was found that both CaCO₃ and CaO can improve the pyrolysis of RH, but CaCO₃ showed better performances, especially on CO₂ capture at lower temperatures and on the enhancement of CO production.

Biodegradable Plastic Blends Create New Possibilities for End-of-Life Management of Plastics but They Are Not a Panacea for Plastic Pollution

Plastic waste pollution is a global environmental problem which could be addressed by biodegradable plastics. The latter are blended together to achieve commercially functional properties, but the environmental fate of these blends is unknown. We have tested neat polymers, polylactic acid (PLA), polyhydroxybutyrate, polyhydroxyoctanoate, poly(butylene succinate), thermoplastic starch, polycaprolactone (PCL), and blends thereof for biodegradation across seven managed and unmanaged environments. PLA is one of the world's best-selling biodegradable plastics, but it is not home compostable. We show here that PLA when blended with PCL becomes home compostable. We also demonstrate that the majority of the tested bioplastics and their blends degrade by thermophilic anaerobic digestion with high biogas output, but degradation times are 3-6 times longer than the retention times in commercial plants. While some polymers and their blends showed good biodegradation in soil and water, the majority of polymers and their blends tested in this study failed to achieve ISO and ASTM biodegradation standards, and some failed to show any biodegradation. Thus, biodegradable plastic blends need careful postconsumer management, and further design to allow more rapid biodegradation in multiple environments is needed as their release into the environment can cause plastic pollution.

Hydrothermal carbonization of Opuntia ficus-indica cladodes: Role of process parameters on hydrochar properties

Opuntia ficus-indica cladodes are a potential source of solid biofuel from marginal, dry land. Experiments assessed the effects of temperature (180-250°C), reaction time (0.5-3h) and biomass to water ratio (B/W; 0.07-0.30) on chars produced via hydrothermal carbonization. Multivariate linear regression demonstrated that the three process parameters are critically important to hydrochar solid yield, while B/W drives energy yield. Heating value increased together with temperature and reaction time and was maximized at intermediate B/W (0.14-0.20). Microscopy shows evidence of secondary char formed at higher temperatures and B/W ratios. X-ray diffraction, thermogravimetric data, microscopy and inductively coupled plasma mass spectrometry suggest that calcium oxalate in the raw biomass remains in the hydrochar; at higher temperatures, the mineral decomposes into CO₂ and may catalyze char/tar decomposition.

Influence of microwave heating on biogas production from Sida hermaphrodita silage

This study compared the effects on biogas production of suspended sludge versus a combination of suspended sludge and immobilized biomass, and microwave versus convection heating. Biogas production was the highest in the hybrid bioreactor heated by microwaves (385L/kg VS) and also the most stable, as shown by the FOS/TAC ratio and pH. Regardless of the type of heating, biogas production was 8% higher with immobilized biomass than without. Although the lag phase of biogas production was shorter with microwave heating than without, the log phase was longer, and biogas production in the microwave heated bioreactors took about twice as long (ca. 40days) to plateau as in the conventionally heated bioreactors. These differences in the profile of biogas production are likely due to the athermal effects of microwave irradiation.

Co-fermentation of sewage sludge with ryegrass for enhancing hydrogen production: Performance evaluation and kinetic analysis

The low C/N ratio and low carbohydrate content of sewage sludge limit its application for fermentative hydrogen production. In this study, perennial ryegrass was added as the co-substrate into sludge hydrogen fermentation with different mixing ratios for enhancing hydrogen production. The results showed that the highest hydrogen yield of 60mL/g-volatile solids (VS)_added was achieved when sludge/perennial ryegrass ratio was 30:70, which was 5 times higher than that from sole sludge. The highest VS removal of 21.8% was also achieved when sludge/perennial ryegrass ratio was 30:70, whereas VS removal from sole sludge was only 0.7%. Meanwhile, the co-fermentation system simultaneously improved hydrogen production efficiency and organics utilization of ryegrass. Kinetic analysis showed that the Cone model fitted hydrogen evolution better than the modified Gompertz model. Furthermore, hydrogen yield and VS removal increased with the increase of dehydrogenase activity.

Leaching characteristics of EDTA-enhanced phytoextraction of Cd and Pb by Zea mays L. in different particle-size fractions of soil aggregates exposed to artificial rain

Chelator-assisted phytoextraction is an alternative and effective technique for the remediation of heavy metal-contaminated soils, but the potential for heavy metal leaching needs to be assessed. In the present study, a soil column cultivation-leaching experiment was conducted to investigate the Cd and Pb leaching characteristics during assisted phytoextraction of metal-contaminated soils containing different particle-size soil aggregates. The columns were planted with Zea mays "Zhengdan 958" seedlings and treated with combined applications of EDTA and simulated rainfall (pH 4.5 or 6.5). The results were as follows: (1) The greatest uptake of Cd and Pb by Z. mays was observed after treatment with EDTA (2.5 mmol kg^-1 soil) and soil aggregates of <1 mm; uptake decreased as the soil aggregate size increased. (2) Simulated rainfall, especially acid rain (pH 4.5), after EDTA applications led to the increasing metal concentrations in the leachate, and EDTA significantly increased the concentrations of both Cd and Pb in the leachate, especially with soil aggregates of <1 mm; metal leachate concentrations decreased as soil particle sizes increased. (3) Concentrations of Cd and Pb decreased with each continuing leachate collection, and data were fit to linear regression models with coefficients of determination (R ²) above 0.90 and 0.87 for Cd and Pb, respectively. The highest total amounts of Cd (22.12%) and Pb (19.29%) were observed in the leachate of soils treated with EDTA and artificial acid rain (pH 4.5) with soil aggregates of <1 mm. The application of EDTA during phytoextraction method increased the leaching risk in the following order: EDTA_2.5-1 (pH 4.5) > EDTA_2.5-1 (pH 6.5) > EDTA_2.5-2 (pH 4.5) > EDTA_2.5-4 (pH 4.5) > EDTA_2.5-2 (pH 6.5) > EDTA_2.5-4 (pH 6.5).

Giant cane (Arundo donax L.) can substitute traditional energy crops in producing energy by anaerobic digestion, reducing surface area and costs: A full-scale approach

Arundo donax L. (Giant cane) was used in a full-scale anaerobic digester (AD) plant (power of 380kWhEE) in partial substitution for corn to produce biogas and electricity. Corn substitution was made on a biomethane potential (BMP) basis so that A. donax L. after substitution accounted for 15.6% of the total mix-BMP (BMPmix) and corn for 66.6% BMPmix. Results obtained indicated that Giant cane was able to substitute for corn, reducing both biomass and electricity production costs, because of both higher biomass productivity (Mg total solid Ha(-1)) and lower biomass cost (€Ha(-1)). Total electricity biogas costs were reduced by 5.5%. The total biomass cost, the total surface area needed to produce the energy crop and the total cost of producing electricity can be reduced by 75.5%, 36.6% and 22%, by substituting corn completely with Giant cane in the mix fed to the full-scale plant.

Agroindustrial residues and energy crops for the production of hydrogen and poly-β-hydroxybutyrate via photofermentation

The present study was aimed at assessing the biotransformation of dark fermented agroindustrial residues and energy crops for the production of hydrogen and poly-β-hydroxybutyrate (PHB), in lab-scale photofermentation. The investigation on novel substrates for photofermentation is needed in order to enlarge the range of sustainable feedstocks. Dark fermentation effluents of ensiled maize, ensiled giant reed, ensiled olive pomace, and wheat bran were inoculated with Rhodopseudomonas palustris CGA676, a mutant strain suitable for hydrogen production in ammonium-rich media. The highest hydrogen producing performances were observed in wheat bran and maize effluents (648.6 and 320.3mLL(-1), respectively), both characterized by high initial volatile fatty acids (VFAs) concentrations. Giant reed and olive pomace effluents led to poor hydrogen production due to low initial VFAs concentrations, as the original substrates are rich in fiber. The highest PHB content was accumulated in olive pomace effluent (11.53%TS), ascribable to magnesium deficiency.