Successful start-up of the anammox process: Influence of the seeding strategy on performance and granule properties

Start-up of Anammox-HAP in IC reactors: Revelation of sludge characteristics and microbial community structure

The scarcity of seed sludge poses a significant barrier to the advancement of anaerobic ammonia oxidation (anammox) process. In this investigation, two alternative sludge (anaerobic granular sludge (AGS) and activated flocculent sludge (AFS)) were employed to start up the anammox process in internal circulation (IC) reactors with the hydroxyapatite (HAP) strategy. Both reactors achieved rapid start-up on days 83 and 53, respectively. Subsequently, a nitrogen removal rate (NRR) of 1.34 gN/L/d was attained at a nitrogen loading rate (NLR) of 1.39 gN/L/d on days 107 and 81 correspondingly. The analysis of granular properties revealed that the anammox granular sludge (AMXGS) transformed from AGS exhibited superior granular size distribution and settling performance. Furthermore, the assessment of microbial community structure demonstrated that inoculating AFS was capable of enriching anammox bacteria (AnAOB) in a shorter time. Last but most importantly, this study provides a comprehensive analysis of the distinct granulation routes of AGS and AFS. AGS predominantly underwent a "broken-adsorption-granulation" process, whereas AFS exhibited not only a typical "adsorption-granulation" process but also a "biofilm growth-granulation" cycle process. The findings of this study offer a novel approach for quickly initiating anammox process when inoculating alternative sludge.

Comprehensive performance of a new-type hybrid membrane bioreactor applied to mainstream anammox process

The new-type submerged granular sludge membrane bioreactor (S-GSMBR) was constructed by installing a membrane module inside an upflow anaerobic sludge blanket. S-GSMBR achieved the fast start-up (47 d) and long-term stable operation (133 d) of mainstream Anammox process as well as the effective control of membrane fouling. The maximum nitrogen removal rate and efficiency were 0.52 kg N m-3 d-1 and 88.32%. The flow field analysis indicated that the turbulent effects were found around the membrane module and benefited for alleviating the membrane fouling at the special axial flow velocity at the central section of the membrane module (4.89 × 10-7 m s-1 to 1.30 × 10-6 m s-1). On day 133, S-GSMBR achieved sludge granulation with 68.63% of particles larger than 200 μm. Meanwhile, Candidatus Brocadia and Candidatus Kuenenia were typical Anammox bacteria in mature Anammox granular sludge. The relative abundance of Candidatus Brocadia and Candidatus Kuenenia was 21.22% and 0.36%, indicating that Candidatus Brocadia occupied the main niche under mainstream Anammox conditions. The feasibility of application of S-GSMBR in mainstream Anammox process was confirmed and moreover S-GSMBR was proven to be a robust mainstream Anammox reactor. This study lays the important theoretical foundation and technical support for the engineering application of the mainstream Anammox process.

Recovery effects of the long-term cryopreserved Anammox sludge by adjusting the sludge amount

Anammox process was one of the most promising nitrogen removal technologies. This study investigated the recovery performance of Anammox sludge after 83 days of cryopreservation in two reactors (R1 and R2). Reactor R1 utilized Anammox sludge pretreated with low-substrate simulated wastewater prior to long-term cryopreservation, and successful recovery was achieved by discharging sludge under ammonia nitrogen concentrations of 100 mg/L. The total nitrogen removal efficiency (TNRE) reached 70.0% on day 48. Reactor R2 used Anammox sludge pretreated with high-substrate simulated wastewater before cryopreservation. At an ammonia nitrogen concentration of 100 mg/L, the TNRE reached 87.0% on day 18. After increasing the ammonia nitrogen concentration to 300 mg/L and discharging sludge, the TNRE reached 84.6% on day 38. When the ammonia nitrogen concentration was elevated to 500 mg/L, system performance deteriorated. Recovery was unsatisfactory when the ammonia nitrogen concentration was reduced back to 300 mg/L. Finally, adding Anammox sludge restored the TNRE to 85.6% after 35 days of operation. The results suggest that adding Anammox sludge is essential for nitrogen removal recovery in reactors under high ammonia nitrogen concentration inhibition, while sludge discharge is crucial when free ammonia (FA) is present. This study provides a simple and effective strategy for recovering the activity of Anammox sludge after long-term cryopreservation.

Enhanced sludge granulation and stable performance of an anammox expanded granular sludge bed (EGSB) reactor through the utilization of hydroxyapatite (HAP) particles

The reuse of hydroxyapatite particles (HAPs) as a granulation activator for anammox sludge was explored to address the remaining issues of time-consuming and unstable granular structure in anammox granulation. During the granulation, nitrogen removal capacity from 2.8 to 13.7 gN/L/d was obtained within 193 days, accompanied by an enhancement in bio-activity from 0.23 to 0.52 gN/gVSS/d. HAPs and anammox microorganisms coupled well to aggregate into granules for denser biomass, higher settleability, and stronger mechanical properties, which effectively improved the biomass retention capacity and structural strength of the sludge system. A skeleton structure formed by the HAPs was characterized during the transformation of the granules, playing a crucial role in strengthening the stability of the sludge. The intermediate processes of granulation were thus clarified to propose an evolutionary pathway for anammox-HAP granules. The pre-addition of HAPs is conducive to achieving faster anammox granulation and rapid process start-up for high-strength wastewater treatment.

Mechanisms underlying the interactions and adaptability of nitrogen removal microorganisms in freshwater sediments

Microorganisms in eutrophic water play a vital role in nitrogen (N) removal, which contributes significantly to the nutrient cycling and sustainability of eutrophic ecosystems. However, the mechanisms underlying the interactions and adaptation strategies of the N removal microorganisms in eutrophic ecosystems remain unclear. We thus analyzed field sediments collected from a eutrophic freshwater ecosystem, enriched the N removal microorganisms, examined their function and adaptability through amplicon, metagenome and metatranscriptome sequencing. We found that the N removal activities could be affected through potential competition and inhibition among microbial metabolic pathways. High-diversity microbial communities generally increased the abundance and expression of N removal functional genes. Further enrichment experiments showed that the enrichment of N removal microorganisms led to a development of simplified but more stable microbial communities, characterized by similar evolutionary patterns among N removal microorganisms, tighter interactions, and increased adaptability. Notably, the sustained provision of NH4+ and NO2- during the enrichment could potentially strengthen the interconnections among denitrification, anaerobic ammonium oxidation (anammox) and dissimilatory nitrate reduction to ammonium (DNRA) processes. Moreover, the identification of shared metabolic traits among denitrification, anammox and DNRA implies important cooperative associations and adaptability of N removal microorganisms. Our findings highlight the microbial interactions affect the adaptive strategies of key microbial taxa involved in N removal.

Rapid start-up and operational characteristics of partial denitrification coupled with anammox driven by innovative strategies

The Partial Denitrification-Anammox (PD/A) process established a low-consumption, efficient and sustainable pathway for complete nitrogen removal, which is of great interest to the industry. Rapid initiation and stable operation of the PD/A systems were the main issues limiting its engineering application in wastewater nitrogen removal. A PD/A system was initiated in a continuous stirred-tank reactors (CSTRs) in the presence of low concentration of organic matter, and the effects of organic matter types and COD/NO3--N ratios on the performance of the PD/A system, and microbial community characteristics were explored. The results showed that low concentrations of organic matter could promote the rapid initiation of the Anammox process and then the strategy of gradually replacing NO2--N with NO3--N could successfully initiate the PD/A system at 70 days. The type of organic matter had a significant effect on the initiation of the Anammox and the establishment of the PD/A system. Compared to glucose, sodium acetate was more favorable for rapid start-up and the synergy among microorganisms, and organic matter was lower, with an optimal COD/NO3--N ratio of 3.0. Microorganisms differed in their sensitivity to environmental factors. The relative abundance of Planctomycetota and Proteobacteria in R2 was 51 %, with the presence of three typical anammox bacteria, Candidatus_Brocadia, Candidatus_Kuenenia, and Candidatus_Jettenia in the system. This study provides a new strategy for the rapid initiation and stable operation of the PD/A process.

Mechanistic insight into the aggregation ability of anammox microorganisms: Roles of polarity, composition and molecular structure of extracellular polymeric substances

The chemical characteristics of extracellular polymeric substances (EPS) of anammox bacteria (AnAOB) play a crucial role in the rapid enrichment of AnAOB and the stable operation of wastewater anammox processes. To clarify the influential mechanisms of sludge EPS on AnAOB aggregation, multiple parameters, including the polarity distribution, composition, and molecular structure of EPS, were selected, and their quantitative relationship with AnAOB aggregation was analyzed. Compared to typical anaerobic sludge (anaerobic floc and granular sludge), the anammox sludge EPS exhibited higher levels of tryptophan-like substances (44.82-56.52 % vs. 2.57-39.81 %), polysaccharides (40.02-53.49 mg/g VSS vs. 30.22-41.69 mg/g VSS), and protein structural units including α-helices (20.70-23.98 % vs. 16.48-19.32 %), β-sheets (37.43-42.98 % vs. 25.78-36.72 %), and protonated nitrogen (Npr) (0.065-0.122 vs. 0.017-0.061). In contrast, it had lower contents of β-turns (20.95-27.39 % vs. 28.17-39.04 %). These biopolymers were found to originate from different genera of AnAOB. Specifically, the α-helix-rich proteins were mainly derived from Candidatus Kuenenia, whereas the extracellular proteins related to tryptophan and Npr were closely associated with Candidatus Brocadia. Critically, these EPS components could drive anammox aggregation through interactions. Substantial amounts of tryptophan-like substances facilitated the formation of β-sheet structures and the exposure of internal hydrophobic clusters, which benefited the anammox aggregation. Meanwhile, extracellular proteins with high Npr content played a pivotal role in the formation of mixed protein-polysaccharide gel networks with the electronegative regions of polysaccharides, which could be regarded as the key component in the maintenance of anammox sludge stability. These findings provide a comprehensive understanding of the multifaceted roles of EPS in driving anammox aggregation and offer valuable insights into the development of EPS regulation strategies aimed at optimizing the anammox process.

Reactivation performance and sludge transformation after long-term storage of Partial denitrification/Anammox (PD/A) process

This study explores the startup of innovative Partial denitrification/Anammox (PD/A) process using long-term stored sludge (>2 years at 4 °C). Results indicate a swift recovery performance, characterized by a progressive increase in the activity of functional microorganisms with improved nitrogen volumetric loading rate during operation. Stable nitrogen removal efficiency of 99.6 % was attained at 14.2 °C under influent nitrate and ammonium of 120 and 100 mg/L, respectively. A distinctive transformation was observed as the initially black seeding sludge transitioned to brownish-red, accompanied by rapid sludge granulation with size notably increased from 263.1 μm (day 4) to 1255.0 μm (day 128), significantly contributing to the rapid PD/A performance recovery. Microbial community analysis revealed substantial increases in functional bacteria, Thauera (0.09 %-10.4 %) and Candidatus Brocadia (0.003 %-1.98 %), coinciding with enhanced nitrogen removal performance. Overall, this study underscores the viability of long-term stored PD/A sludge as a seed for rapid reactor startup, offering useful technical support to advance practical PD/A process implementation.

Efficient reactivation of anammox sludge after prolonged storage using a combination of batch and continuous reactors

Due to the slow growth rate of anammox bacteria, enriched sludge is required for the rapid start-up of anammox-based reactors. However, it is still unclear if long-term stored anammox sludge (SAS) is an effective source of inoculum to accelerate reactor start-up. This study explored the reactivation of long-term SAS and developed an efficient protocol to reduce the start-up period of an anammox reactor. Although stored for 13 months, a low level of the specific anammox activity of 28 mg N/g VSS/d was still detected. Experimental Phase 1 involved the direct application of SAS to an upflow sludge bed reactor (USB) operated for 90 d under varying conditions of hydraulic retention time and nitrogen concentrations. In Phase 2, batch runs were executed prior to the continuous operation of the USB reactor. The biomass reactivation in the continuous flow reactor was unsuccessful. However, the SAS was effectively reactivated through a combination of batch runs and continuous flow feed. Within 75 days, the anammox process achieved a stable rate of nitrogen removal of 1.3 g N/L/day and a high nitrogen removal efficiency of 84.1 ± 0.2%. Anammox bacteria (Ca. Brocadia) abundance was 37.8% after reactivation. These overall results indicate that SAS is a feasible seed sludge for faster start-up of high-rate mainstream anammox reactors.

Quantitative effect of adding percentages of anammox granules on the start-up process and microbial community analysis

The anaerobic ammonium oxidation (anammox) process is challenging due to its long start-up duration and high demand for mature anammox seed sludge. However, adding a small amount of anammox sludge to the inoculum can be a reasonable solution. This study investigated the effect of adding percentage of anammox granules (0, 1, 2, 4, and 8%) in the seed sludge on the anammox start-up process. The anammox process was achieved in all five reactors after 55, 6, 5, 3 and 0 days. Increasing the adding percentage effectively shortened the duration of lag phase and cell lysis, but had little effect on the final nitrogen removal performance, except for 4% adding percentage. Families of Brocadiaceae, Burkholderiaceae, Ignavibacteriaceae, SJA-28, and Rhodocyclaceae were dominant, with a core microbiota of eight operational taxonomic unites (OTUs), and Candidatus Brocadia fulgida became the dominant anammox species. Seven synergistic members with anammox bacteria were identified by correlation network analysis. Major potential functional groups involved in C and N cycle were also observed by FAPROTAX. Together with the qPCR and sequencing results, it was suggested that more than 2% of adding percentages would result in a short lag phase, rapid growth rate in elevation stage, high final performances, and anammox bacteria abundance comparable to that in the anammox seed sludge. This crucial finding indicated the feasibility of economical and rapid start-up of the anammox process with a minimum amount of anammox seed sludge.

Enhancing start-up strategies for anammox granular sludge systems: A review

The anaerobic ammonium oxidation (anammox) process has been developed as one of the optimal alternatives to the conventional biological nitrogen removal process because of its high nitrogen removal capacity and low energy consumption. However, the slow growth rate of anammox bacteria and its high sensitivity to environmental changes have resulted in fewer anammox sludge sources for process start-up and a lengthy start-up period. Given that anammox microorganisms tend to aggregate, granular-anammox sludge is a frequent byproduct of the anammox process. In this study, we review state-of-the-art strategies for promoting the formation of anammox granules and the start-up of the anammox process based on the literature of the past decade. These strategies are categorized as the transformation of alternative sludge, the addition of accelerators, the introduction of functional carriers, and the implementation of other physical methods. In addition, the formation mechanism of anammox granules, the operational performance of various strategies, and their promotion mechanisms are introduced. Finally, prospects are presented to indicate the gaps in contemporary research and the potential future research directions. This review functions as a summary guideline and theoretical reference for the cultivation of granular-anammox sludge, the start-up of the anammox process, and its practical application.

Functions and mechanisms of sponge iron-mediated multiple metabolic processes in anaerobic ammonium oxidation

Sponge iron (SI) is a promising material for nitrogen removal from wastewater. This study reveals the potential functions and mechanisms of SI-mediated multiple metabolic processes in the nitrogen removal of Anammox. The results showed that although the SI application prolonged the start-up time of the reactor, achieved efficient and stable nitrogen removal after a successful start-up. The total nitrogen removal efficiency of the SI-Anammox system (92.62%) was 13.30% higher than that of R0 without SI (79.32%). The increase in nitrogen removal performance was accompanied by an increase in SAA and EPS content. Further microbial analysis showed significant enrichment of functional microorganisms, such as Candidatus_Brocadia, Nitrosomonas, Ellin6067, and Nitrospira. Multi-omics evidence suggests that efficient nitrogen removal is ultimately attributable to the enhancement of the specific key Fe- and N-functional genes in Anammox.

Ecological interactions and the underlying mechanism of anammox and denitrification across the anammox enrichment with eutrophic lake sediments

BACKGROUND

Increasing attention has recently been devoted to the anaerobic ammonium oxidation (anammox) in eutrophic lakes due to its potential key functions in nitrogen (N) removal for eutrophication control. However, successful enrichment of anammox bacteria from lake sediments is still challenging, partly due to the ecological interactions between anammox and denitrifying bacteria across such enrichment with lake sediments remain unclear.

RESULTS

This study thus designed to fill such knowledge gaps using bioreactors to enrich anammox bacteria with eutrophic lake sediments for more than 365 days. We continuously monitored the influent and effluent water, measured the anammox and denitrification efficiencies, quantified the anammox and denitrifying bacteria, as well as the related N cycling genes. We found that the maximum removal efficiencies of NH₄⁺ and NO₂^- reached up to 85.92% and 95.34%, respectively. Accordingly, the diversity of anammox and denitrifying bacteria decreased significantly across the enrichment, and the relative dominant anammox (e.g., Candidatus Jettenia) and denitrifying bacteria (e.g., Thauera, Afipia) shifted considerably. The ecological cooperation between anammox and denitrifying bacteria tended to increase the microbial community stability, indicating a potential coupling between anammox and denitrifying bacteria. Moreover, the nirS-type denitrifiers showed stronger coupling with anammox bacteria than that of nirK-type denitrifiers during the enrichment. Functional potentials as depicted by metagenome sequencing confirmed the ecological interactions between anammox and denitrification. Metagenome-assembled genomes-based ecological model indicated that the most dominant denitrifiers could provide various materials such as amino acid, cofactors, and vitamin for anammox bacteria. Cross-feeding in anammox and denitrifying bacteria highlights the importance of microbial interactions for increasing the anammox N removal in eutrophic lakes.

CONCLUSIONS

This study greatly expands our understanding of cooperation mechanisms among anammox and denitrifying bacteria during the anammox enrichment with eutrophic lake sediments, which sheds new insights into N removal for controlling lake eutrophication. Video Abstract.

Metabolomics uncovers adaptation discrepancy among anammox granular sludge with different granule size: Metabolic pathway regulation by consortia cooperation

The relationship between granular size and anaerobic ammonium oxidation (anammox) performance in the anammox granular sludge (AnGS) system has been extensively observed. However, the metabolic pathways regulated by communication and cross-feedings among anammox consortia remain unclear. The reactor operation and metabolomics analyses were combined to explore the influence of microbiota cooperation on metabolic pathways and granule properties under low temperature (18 °C) and nitrite inhibition. Anammox activity was sustained under challenging circumstances by active quorum sensing among anammox consortia in AnGS with diameters larger than 1.4 mm, which promoted nucleotide metabolism. Cross-feedings among anammox consortia increased the levels of molybdopterin cofactor and folate meanwhile decreasing the cost of carbon fixation metabolism, which supported anabolism and maintained the content of heme c and extracellular polymeric substance. These metabolic insights into the AnGS system provide a new view for anammox process overcoming the low temperature and nitrite stress.

Succession of microbial communities reveals the inevitability of anammox core in the development of anammox processes

The lack of anammox seeds is regarded as the bottleneck of anammox-based processes. Although the interactions in anammox consortia have attracted increasing attention, little is known about the influence of inoculated sludge populations on the growth of anammox bacteria. In this study, four sludge of distinct communities mixed with anammox sludge (the relative abundance of Ca. Kuenenia was 1.96 %) were used as the seeds, respectively for the start-up of anammox processes. Notably, all these mixed microbial communities tend to form a similar microbial community, defined as the anammox core, containing anammox-bacteria (22.9 ± 5.9 %), ammonia-oxidizing-bacteria (0.8 ± 0.7 %), nitrite-oxidizing-bacteria (0.2 ± 0.2 %), Chloroflexi-bacteria (0.7 ± 0.4 %), and heterotrophic-denitrification-bacteria (0.3 ± 0.2 %). It also elucidated that the communities of Nitrosomonas-dominated sludge were the closest to the anammox core, and achieved the highest nitrogen-removal rate of 0.73 kg-N m^-3 d^-1. This study sheds light on the solution to the shortage of anammox seeds in the full-scale wastewater treatment application.

Long-term adaptation of two anammox granules with different ratios of Candidatus Brocadia and Candidatus Jettenia under increasing salinity and their application to treat saline wastewater

Nitrogen removal in saline wastewater is a challenge of the anaerobic ammonium oxidation (anammox) process, which is dominated by freshwater anammox bacteria (FAB). Candidatus Brocadia and Candidatus Jettenia, the most widely used FABs, have been separately applied and evaluated for their ability to treat saline wastewater. To understand the effect of salinity on nitrogen removal capability when they present together in an anammox granule, we compared two anammox granules: GRN1 was evenly dominated by Ca. Brocadia (42 %) and Ca. Jettenia (43 %), while GRN2 was dominated with mostly Ca. Brocadia (90 %) and a small amount of Ca. Jettenia (1 %). Each granule was inoculated into a continuous column reactor to treat artificial wastewater containing 150 mg NH₄⁺-N/L and 150 mg NO₂^--N/L under increasing saline conditions for 250 days. GRN1 showed superior and more stable nitrogen removal than GRN2 under saline conditions of up to 15 g NaCl/L. Under high-saline conditions, both the granules' sizes decreased (larger GRN1 than GRN2 in initial). The mass percent of Na salt increased (more in GRN2) and mineral contents decreased more in GRN1. High-throughput sequencing for microbial community analysis showed that Planctomycetes in GRN1 (85 %) and GRN2 (92 %) decreased to 14 % and 12 %, respectively. The ratio of Ca. Brocadia and Ca. Jettenia in GRN1 changed to 37 % and 63 %, respectively, whereas the ratio in GRN2 (99 % and 1 %, respectively) did not change. Both salt-adapted granules were applied to the two-stage partial nitritation and anammox (PN/A) process to treat high strength ammonium (400 mg/L) wastewater under high saline condition (15 g NaCl/L). The PN/A process containing GRN1 showed more stable nitrogen removal performance during approximately 100 days of operation. These results suggest that the anammox granules evenly dominated by two FABs, Ca. Brocadia and Ca. Jettenia, would be advantageous to treat high-strength NH₄⁺ wastewater under high-saline conditions.

Accelerating the granulation of anammox sludge in wastewater treatment with the drive of "micro-nuclei": A review

Anammox granule sludge (AnGS) has great potential in the field of wastewater nitrogen removal, but its development and promotion have been limited by the slow granulation speed and fragile operating stability. Based on the reviews about the AnGS formation mechanism in this paper, "micro-nuclei" was found to play an important role in the granulation of AnGS, and adding "micro-nuclei" directly into the reactor may be an efficient way to accelerate the formation of AnGS. Then, accelerating AnGS granulation with inert particles, multivalent positive ions, and broken granule sludge as "micro-nuclei" was summarized and discussed. Among inert particles, iron-based particles may be a more advantageous candidate for "micro-nuclei" due to their ability to provide attachment sites and release ferric/ferrous ions. The precipitations of multivalent positive ions are also a potential option for "micro-nuclei" that can be generated in-situ, but a suitable dosing strategy is necessary. About broken granular sludge, the broken active AnGS may have advantages in terms of anaerobic ammonium oxidation bacteria-affinity and granulation speed, while using inactive granular sludge as "micro-nuclei" can avoid interfering bacterial invasion and has a higher cost performance than broken active AnGS. In addition, possible research directions for accelerating the formation of AnGS by dosing "micro-nuclei" were highlighted. This paper is intended to provide a possible pathway for the rapid start-up of AnGS systems, and references for the optimization and promotion of the AnGS process.

Improving the biomass retention and system stability of the anammox EGSB reactor by adding a calcium silicate hydrate functional material

Improving the biomass retention and the sludge system stability to promote the full-scale application of anammox process is the focus of current related research. In this study, a calcium silicate hydrate functional material with calcium-releasing ability and weak alkalinity was used for an enhanced anammox process. In the long-term operation, an increase in the nitrogen removal rate (NRR) from 2.75 to 13.38 gN/L/d was achieved after 50 days of operation, with the abundance of Candidatus Kuenenia increased from 40.1 % to 47.0 %. The anammox activity was strengthened from 0.089 to 0.55 gN/gVSS/d over 50 days, with a growth rate being fitted at 0.0310 d^-1. The resilience of the EGSB anammox system after inhibitions was investigated by substrate shock and low pH shock in long-term operation and batch test. Besides that, the phosphorus removal efficiency of the reactor reached up to 90 % under the positive effect of functional material. The functional material was shown to continuously provide calcium in the long-term for the reaction of hydroxyapatite (HAP) formation, which further improved the granular properties of the sludge and the biomass retention ability of the reactor. The promotion effect of functional material on the sludge granulation and anammox microbes retaining efficiency was the key for a high-resilience anammox EGSB reactor.

Role of quorum sensing-based regulation in development of anaerobic ammonium oxidation process

Shortage of anaerobic ammonium oxidation (anammox) sludge greatly limits the extensive full-scale application of anammox-based processes. Although numerous start-up strategies have been proposed, the interaction among microbial consortia and corresponding mechanism during the process development remain unknown. In this study, three reactors were established based on different seed sludges. After 27 days, the anammox process inoculated with anammox granules and activated sludge (1:5) was firstly achieved, and the highest nitrogen removal rate was 1.17 kg N m^-3 d^-1. Correspondingly, the anammox activity and abundances of related functional genes increased. Notably, the dominant anammox bacteria shifted from Candidatus Kuenenia to Candidatus Brocadia. Metagenomic analysis indicated that quorum sensing-based regulation mainly contributed to the proliferation and accumulation of anammox bacteria. This work provides an insight into the quorum sensing (QS)-regulated microbial interactions in the anammox and activated sludge consortia during the process development.

Environmental and Economic Impacts of Managing Nutrients in Digestate Derived from Sewage Sludge and High-Strength Organic Waste

Increasingly stringent limits on nutrient discharges are motivating water resource recovery facilities (WRRFs) to consider the implementation of sidestream nutrient removal or recovery technologies. To further increase biogas production and reduce landfilled waste, WRRFs with excess anaerobic digestion capacity can accept other high-strength organic waste (HSOW) streams. The goal of this study was to characterize and evaluate the life-cycle global warming potential (GWP), eutrophication potential, and economic costs and benefits of sidestream nutrient management and biosolid management strategies following digestion of sewage sludge augmented by HSOW. Five sidestream nutrient management strategies were analyzed using environmental life-cycle assessment (LCA) and life-cycle cost analysis (LCCA) for codigestion of municipal sewage sludge with and without HSOW. As expected, thermal stripping and ammonia stripping were characterized by a much lower eutrophication potential than no sidestream treatment; significantly higher fertilizer prices would be needed for this revenue stream to cover the capital and chemical costs. Composting all biosolids dramatically reduced the GWP relative to the baseline biosolid option but had slightly higher eutrophication potential. These complex environmental and economic tradeoffs require utilities to consider their social, environmental, and economic values in addition to present or upcoming nutrient discharge limits prior to making decisions in sidestream and biosolids management.

Distinctive differences in the granulation of saline and non-saline enriched anaerobic ammonia oxidizing (AMX) bacteria

The growing interest in the anaerobic ammonium oxidizing (AMX) process in treating high nitrogen containing wastewaters and a comprehensive study into the granulation mechanism of these bacteria under diverse environmental conditions over the years have been unequal. To this effect, the distinctive differences in saline adapted AMX (S_AMX) and non-saline adapted AMX (NS_AMX) granules are presented in this study. It was observed that substrate utilisation profiles, granule formation mechanism, and pace towards granulation differed marginally for the two adaptation conditions. The different microbial dominant aggregation types aided in splitting the 471 days operated lab-scale SBRs into three distinct phases. In both reactors, phase III (granules dominant phase) showed the highest average nitrogen removal efficiency of 87.9% ± 4.8% and 85.6% ± 3.6% for the S_AMX and NS_AMX processes, respectively. The extracellular polymeric substances (EPS) quantity and major composition determined its role either as a binding agent in granulation or a survival mechanism in saline adaptation. It was also observed that granules of the S_AMX reactor were mostly loosely and less condensed aggregates of smaller sub-units and flocs while those of the NS_AMX reactor were compact agglomerates. The ionic gradient in saline enrichment led to an increased activity of the Na⁺/K⁺ - ATPase, hence enriched granules produced higher cellular adenosine triphosphate molecules which finally improved the granules active biomass ratio by 32.96%. Microbial community showed that about three to four major known AMX species made up the granules consortia in both reactors. Proteins and expression of functional genes differed for these different species.

Nitrogen removal performance and rapid start-up of anammox process in an electrolytic sequencing batch reactor (ESBR)

In this study, the electrolytic sequencing batch reactor (ESBR) with different current densities was constructed to investigate the nitrogen removal performance and rapid start-up of anaerobic ammonia oxidation (anammox) process. The changes of total nitrogen removal rate (TNRR), specific anammox activity (SAA) and nitrogen concentration under different current densities were analyzed, and then the effect of the optimal current density on the start-up of anammox in ESBR was explored. The results showed that ammonium nitrogen removal efficiency (92.7%), nitrite nitrogen removal efficiency (15.5%) and total nitrogen removal efficiency (28.1%) were obtained with the TNRR and SAA were 0.0118 g N L^-1 d^-1 and 0.0050 g N (g Vss d)^-1, respectively under the optimal conditions (i.e., current density = 0.10 mA cm^-2, temperature = 36 °C and pH = 7.6). In addition, the stoichiometric ratio indicated that anammox was initiated successfully for 91 days in ESBR with the current density of 0.10 mA cm^-2, which was shortened by 10 days compared with the conventional SBR without current density. These results suggest that an array of rapid start-up processes of anammox can be developed through applying current density to stimulate the activity of anammox bacteria (AnAOB).

Microbial dynamics reveal the adaptation strategies of ecological niche in distinct anammox consortia under mainstream conditions

The feasibility of anammox-based processes for nitrogen-contained wastewater treatment has been verified with different anammox bacteria, however, the ecological niche of anammox bacteria under mainstream conditions is still elusive. In this study, six sludge samples collected from different habitats were utilized to culture anammox bacteria under mainstream conditions, and two distinct anammox genera (Ca. Kuenenia and Ca. Brocadia) with a relative abundance of 6.31% (C1) and 3.09% (C3), respectively, were identified. Notably, the microbial dynamics revealed that anammox bacteria (AMX), ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB), Chloroflexi bacteria (CFX), and heterotrophic denitrification bacteria (HDB) were the core members in anammox consortia. However, Ca. Kuenenia and Ca. Brocadia occupied different ecological niches in anammox consortia. The dissolved oxygen and microbial structures of the anammox-continuous stirred tank reactor systems were the main factors to affect their niche differentiation. Meanwhile, comammox might exist in the systems and occupy the ecological niche of AOB in nitrogen cycling. The network analysis suggested that Ignavibacterium could be the associated bacteria in Ca. Kuenenia-dominated consortia, while Ca. Nitrotoga was that in the Ca. Brocadia-dominated consortia. Our findings reveal a valuable reference for the observation of distinct anammox genera under mainstream conditions, which provides theoretical guidance for the engineering application of mainstream anammox-based processes.

Low strength wastewater anammox start-up and stable operation by inoculating sponge-iron sludge: Cooperation of biological iron and iron bacteria

The application of anaerobic ammonium oxidation (Anammox) technology in low-strength wastewater treatment still faces difficult in-situ start-ups and unstable operations. Sponge-iron sludge (R1) was used as a novel inoculum to provide a promising solution. Conventional activated sludge (R0) was used as the control. However, little is known about the feasibility and performance during the start-up and operation of Anammox combined with biological iron and iron bacteria in an iron sludge system. Anammox was successfully started both in R1 (87 days) and R0 (89 days) with a low-strength influent (with a nitrogen loading rate (NLR) of 43.64 ± 0.41 g N/(m3⋅d)). During long-term operation, the R0 nevertheless produced higher nitrates (9.7 ± 0.1 mg/L) than expected. In contrast, R1 presented no excess nitrate production (2.1 ± 0.06 mg/L). The total inorganic nitrogen (TIN) removal efficiency increased from 78.2 ± 7.1% in R0 to 86.1 ± 4.3% in R1. The iron sludge in R1 was divided equally into three parts and three different nitrogen-feeding methods were used over the 34 days of operation, as follows: first using a mixture of ammonium (27.15 ± 1.0 mg/L) and nitrite (32.7 ± 1.7 mg/L), then only ammonium (27.15 ± 1.0 mg/L) and lastly only nitrite (32.7 ± 1.7 mg/L) as the influent. R1 was a coupled system composed of Anammox, Feammox, and NOx--dependent Fe(II) oxidation (NDFO). The contribution of Feammox and NDFO to TIN removal was 27.1 ± 1.2% and 31.9 ± 0.7%. However, Anammox was the primary nitrogen transformation pathway. X-ray diffraction (XRD) analysis shows that iron hydroxide (Fe(OH)3) and iron oxide hydroxide (FeOOH) were generated in R1. The produced Fe(OH)3 and FeOOH were capable of participating in Feammox and formed a Fe(II)/Fe(III) cycle which further removed nitrogen. Therefore, a highly stable and impressive nitrogen removal performance was demonstrated in the iron sludge Anammox system under the cooperation of biological iron and iron bacteria. The study considered the enrichment of norank_c_OM190, Desulfuromonas, and Thiobacillus and their contribution to the Anammox, Feammox, and NDFO processes, respectively. This study provides a new perspective for the start-up and stable operation of low-strength wastewater Anammox engineering applications.

Metagenomic insights into the symbiotic relationship in anammox consortia at reduced temperature

Anammox as a promising biological nitrogen removal technology has attracted much attention. However, cold temperature would limit its wide application and little is known about the microbial interactions between anammox bacteria (AnAOB) and heterotrophic bacteria at cold temperature. Here, we observed reduced temperature (25-15 °C) promoted the secretion of EPS and thus stimulated bigger size of granular sludge in a laboratory-scale anammox reactor. We further combined co-occurrence network analysis and genome-centered metagenomics to explore the potential interactions between AnAOB and heterotrophic bacteria. Network analysis suggested 22 out of 25 positively related species were reported as definite heterotrophic bacteria in subnetwork of AnAOB. Genome-centered metagenomics analysis yielded 23 metagenomic assembly genomes (MAGs), and we found that Acidobacteriota-affiliated bacteria could biosynthesize most polysaccharides (PS) precursors and contain the most glycosyltransferases and transporters to facilitate exopolysaccharides biosynthesis, together with partial PS precursors produced by AnAOB. AMX1 as the only anammox genome could synthesize most amino acids and cross feed with some heterotrophs to affect the extracellular protein function. Additionally, Bacteroidota, Planctomycetota, Chloroflexota, and Proteobacteria could contribute folate and molybdopterin cofactor for AMX1 to benefit their activity and growth. Superphylum Patescibacteria could survive by cross-feeding with AnAOB and heterotrophic organisms about organic compounds (Glyceraldehyde-3P and lactate). These cross-feedings maintained the stability of anammox reactor performance and emphasize the importance of heterotrophs in anammox system at reduced temperature.

Initiating an anaerobic ammonium oxidation reactor by inoculation with starved anaerobic ammonium oxidation sludge and modified carriers

Prolonged starved anammox sludge (SAS) obtained during initial rejuvenation was inoculated into a reactor together with activated sludge (AS), anaerobic granular sludge (AGS) and modified carriers consisting of honeycomb carrier with high biological interception and activated carbon carrier with high adsorption performance. SAS accounted for 5% of the inoculated sludge. The anammox process was started and operated at around 25℃. After 160 days, the nitrogen loading rate and nitrogen removal rate reached 1.12 kgN·m^-3·d^-1 and 0.97 kgN·m^-3·d^-1, respectively. Obvious red anammox biofilms were observed on the modified carriers. Microbial community analysis showed that the relative abundance of anammox bacteria increased from < 0.1% to 22.96%. Candidatus Jettenia and Candidatus Brocadia were the dominating anammox species. This work demonstrates the potential to reuse SAS to improve the start-up efficiency of anammox reactors, which makes good economic sense.

Fast formation of anammox granules using a nitrification-denitrification sludge and transformation of microbial community

A lengthy start-up period has been one of the key obstacles limiting the application of the anammox process. In this investigation, a nitrification-denitrification sludge was used to start-up the anammox EGSB process. The transformation process from nitrification-denitrification sludge to anammox granule sludge was explored through the aspects of nitrogen removal performance, granule properties, microbial community structure, and evolution route. A successful start-up of the anammox process was achieved after 94 days of reactor operation. The highest nitrogen removal rate (NRR) obtained was 7.25±0.16 gN/L/d at a nitrogen loading rate (NLR) of 8.0 gN/L/d, and the corresponding nitrogen removal efficiency was a high 90.61±1.99%. The results of the microbial analysis revealed significant changes in anammox bacteria, nitrifying bacteria, and denitrifying bacteria in the sludge. Notably, the anammox bacteria abundance increased from 2.5% to 29.0% during the operation, and Candidatus Kuenenia and Candidatus Brocadia were the dominant genera. Distinct-different successions on Candidatus Brocadia and Candidatus Kuenenia were also observed over the long-term period. In addition, the settling performance, anammox activity and biomass retention capacity of the granules were significantly enhanced during this process, and the corresponding granule evolution route was also proposed. The results in this study indicate the feasibility of using available seed sludge source for the fast-transformation of anammox granules, it is beneficial to the large-scale application of anammox process and the utilization of excess sludge.

Dual inner circulation and multi-partition driving single-stage autotrophic nitrogen removal in a bioreactor

The single-stage autotrophic nitrogen removal (ANR) process is impeded by a long start-up cycle and unstable operation performance. In this study, an airlift inner-circulation partition bioreactor (AIPBR) was operated continuously for 215 days to explore methods of strengthening the performance and stable operation of the single-stage ANR system. AIPBR start-up period took around 38 days, the total nitrogen removal efficiency was > 85% on day 35. With the decrease of hydraulic retention time and the increase of aeration rate, the nitrogen removal rate increased to 0.85 ± 0.02 kg-N/m³/day. The sludge morphology gradually changed into dark-red floc-coupled granular sludge. Nitrosomonas (9.95%) and Candidatus Brocadia (6.41%) were dominant in the sludge. During long-term operation, AIPBR achieved the dual inner circulation of sewage and sludge and then formed effective dissolved oxygen and sludge partitions to provide a suitable growth environment for various functional bacteria, promote synergy between them, and strengthen the ANR performance.

The r/K selection theory and its application in biological wastewater treatment processes

Understanding the characteristics of functional organisms is the key to managing and updating biological processes for wastewater treatment. This review, for the first time, systematically characterized two typical types of strategists in wastewater treatment ecosystems via the r/K selection theory and provided novel strategies for selectively enriching microbial community. Functional organisms involved in nitrification (e.g., Nitrosomonas and Nitrosococcus), anammox (Candidatus Brocadia), and methanogenesis (Methanosarcinaceae) are identified as r-strategists with fast growth capacities and low substrate affinities. These r-strategists can achieve high pollutant removal loading rates. On the other hand, other organisms such as Nitrosospira spp., Candidatus Kuenenia, and Methanosaetaceae, are characterized as K-strategists with slow growth rates but high substrate affinities, which can decrease the pollutant concentration to low levels. More importantly, K-strategists may play crucial roles in the biodegradation of recalcitrant organic pollutants. The food-to-microorganism ratio, mass transfer, cell size, and biomass morphology are the key factors determining the selection of r-/K-strategists. These factors can be related with operating parameters (e.g., solids and hydraulic retention time), biomass morphology (biofilm or granules), and operating modes (continuous-flow or sequencing batch), etc., to achieve the efficient acclimation of targeted r-/K-strategists. For practical applications, the concept of substrate flux was put forward to further benefit the selective enrichment of r-/K-strategists, fulfilling effective management and improvement of engineered pollution control bioprocesses. Finally, the future perspectives regarding the development of the r/K selection theory in wastewater treatment processes were discussed.

How anammox process resists the multi-antibiotic stress: Resistance gene accumulation and microbial community evolution

The effects of multiple antibiotics on the anaerobic ammonia oxidation (anammox) process were investigated. The resistance of the anammox system to high-concentration antibiotics was also demonstrated through gradual acclimation experiments. Inhibition of the anammox process (R₁) occurred when the concentrations of erythromycin (ERY), sulfamethoxazole (SMX) and tetracycline (TC) were 0.1, 5.0 and 0.1 mg L^-1, respectively. The nitrogen removal efficiency (NRE) of R₁ was reduced from 97.2% to 60.7% within 12 days and then recovered to 88.9 ± 9.5% when the nitrogen loading declined from 4.52 ± 0.69 to 2.11 ± 0.58 kg N m^-3 d^-1. Even when the concentrations of ERY, SMX and TC were as high as 1.0, 15.0 and 1.0 mg L^-1, respectively, R₁ maintained stable operation. The increases in the abundance of antibiotic resistance genes (ARGs) and in extracellular polymeric substances (EPS) content showed that the anammox process alleviated stress from multiple antibiotics mainly by producing ARGs and secreting EPS. The molecular docking simulation results illustrated the potential binding sites between ammonium transporter and different antibiotics. The upregulation of functional gene expression and the stable abundance of Candidatus Kuenenia in R₁ compared with that in the control suggested that the R₁ reactor generally maintained more stable long-term operation. This work provides a new understanding of the application of the anammox process to treat wastewater containing multiple antibiotics.

Nitrogen Removal from Mature Landfill Leachate via Anammox Based Processes: A Review

Mature landfill leachate is a complex and highly polluted effluent with a large amount of ammonia nitrogen, toxic components and low biodegradability. Its COD/N and BOD5/COD ratios are low, which is not suitable for traditional nitrification and denitrification processes. Anaerobic ammonia oxidation (anammox) is an innovative biological denitrification process, relying on anammox bacteria to form stable biofilms or granules. It has been extensively used in nitrogen removal of mature landfill leachate due to its high efficiency, low cost and sludge yield. This paper reviewed recent advances of anammox based processes for mature landfill leachate treatment. The state of the art anammox process for mature landfill leachate is systematically described, mainly including partial nitrification–anammox, partial nitrification–anammox coupled denitrification. At the same time, the microbiological analysis of the process operation was given. Anaerobic ammonium oxidation (anammox) has the merit of saving the carbon source and aeration energy, while its practical application is mainly limited by an unstable influent condition, operational control and seasonal temperature variation. To improve process efficiency, it is suggested to develop some novel denitrification processes coupled with anammox to reduce the inhibition of anammox bacteria by mature landfill leachate, and to find cheap new carbon sources (methane, waste fruits) to improve the biological denitrification efficiency of the anammox system.

Metagenomic prediction analysis of microbial aggregation in anammox-dominated community

Aggregation of anammox bacteria is essential to maintain high biomass concentrations and prevent the loss of biomass in anammox processes. PICRUSt (Phylogenetic Investigation of Communities by Reconstruction of Unobserved States) was used in this study to predict the metagenomic potentials and characterize the microbial community structure and functional features in anammox aggregates (e.g., sludge flocs, biofilms, and granules). The results showed that Candidatus Brocadia was the most dominant anammox genera in all aggregates (38.0% in flocs, 69.4% in biofilm, and 52.0% in granules) and the functional gene involved in the anammox process was detected in the highest amount in biofilms, followed by granules and flocs. Furthermore, the anammox microbial aggregation pathway was explored that anammox bacteria have strong motility and high capability for early attachment. Anammox bacteria could produce large amounts of EPS (extracellular polymeric substances) regulated by quinolone and transport to extracellular environment through type II secretion system. The strong ability of c-di-GMP (bis-(3'-5')-cyclic dimeric guanosine monophosphate) synthesis enabled a stable architectural structure of aggregation. This study elucidated the aggregation mechanism of anammox microorganisms at the genetic level to enhance the stability of anammox processes. PRACTITIONER POINTS: Candidatus Brocadia was the most dominant anammox genera in aggregates. Anammox bacteria have strong motility and high attachment capability. Anammox bacteria possess strong EPS synthesis regulated by quinolone. c-di-GMP synthesis enables a stable structure of aggregation.

Layered inoculation of anaerobic digestion and anammox granular sludges for fast start-up of an anammox reactor

Layered inoculation of anaerobic digestion (AD) and anammox granular sludges was performed for fast start-up of anammox using an expanded granular sludge bed (EGSB) reactor (R1) with the cell lysis phase and the lag phase being shortened. The maximum nitrogen loading rate (NLR) and nitrogen removal rate (NRR) of R1 were 11 kg N/m³ d and 9.9 kg N/m³ d on day 42, respectively. The domesticated AD granular sludge on the upper layer was collected to another EGSB reactor (R2) to investigate its anammox activity. The results showed that AD granular sludge in R1 had anammox activity and could be cultured into anammox granular sludge. Adsorption, interception and domestication enhanced the biomass of anammox bacteria in R1, accelerating the start-up of the reactor. The findings of this work were expected to solve the problem of fast start-up of an anammox reactor with insufficient anammox seeding sludge in industrial application.

Fast start-up and enhancement of partial nitritation and anammox process for treating synthetic wastewater in a sequencing bath biofilm reactor: Strategy and function of nitric oxide

In this study, the partial nitritation and anammox (PN-A) process was initiated within 30 days in a sequencing batch biofilm reactor (SBBR) by employing pre non-aeration and post non-aeration with fixed aeration rates. The average ammonia removal efficiency (ARE), total nitrogen removal efficiency (TNRE) of 98.5 ± 1.5% and 89.5 ± 1.6% were achieved. By doubling aeration rate and agitation rate and adopting pre non-aeration, the TNRR was promoted from 0.135 ± 0.013 kg N·m^-3·d^-1 to 0.285 ± 0.015 kg N·m^-3·d^-1, obtaining an average ARE and TNRE of 97.5 ± 1.5% and 85.5 ± 2.6%. Nitric oxide might induce anaerobic ammonia oxidation bacteria (AnAOB) during the start-up stage, and could be an indicator for synergetic state between ammonia oxidation bacteria (AOB) and AnAOB. Lower nitrous oxide emission factor of 0.51% was obtained. The abundance of AOB, AnAOB and nitrite oxidation bacteria (NOB) accounted for 1.6%, 19.3% and 0.3%, respectively.

Diverse microbiota in palatal radicular groove analyzed by Illumina sequencing: Four case reports

BACKGROUND

A palatal radicular groove is an unusual developmental deformity of the tooth, which may serve as a channel linking the periodontal and periapical inflammation, and yet no literature could be obtained analyzing microbiota within the palatal radicular grooves.

CASE SUMMARY

Four patients diagnosed with palatal radicular groove and concomitant periodontal-endodontic deformity in permanent maxillary lateral incisors were enrolled in this work. Twelve bacterial samples from 4 patients were collected from different parts of the palatal radicular groove during intentional replantation surgery. Illumina sequencing was performed to analyze the taxonomical composition and microbiome structure inside the palatal grooves, and 1162 operational taxonomic units were obtained. The phyla of Firmicutes and Proteobacteria predominated in most of the samples. An unknown genus from the Bacillaceae family, Lactococcus, and Porphyromonas were the most abundant genera identified. There was no difference in the microbiota richness and diversity in three sections of the groove.

CONCLUSION

The unique ecological niches inside the palatal grooves harbored bacterial communities that shared some component features of both the endodontic and periodontal infections. The existence of palatal groove may play an interaction bridge between the root apex and tooth cervix and thus impair the outcome of traditional therapeutic methods such as root canal treatment and periodontal management.

A review of quorum sensing improving partial nitritation-anammox process: Functions, mechanisms and prospects

Partial nitritation-anammox (PNA) is a promising and energy-efficient process for the sustainable nitrogen removal. However, its wide applications are still limited by the long start-up period and instability of long-term operation. Quorum sensing (QS), as a way of cell-to-cell communication generally regulating various microbial behaviors, has been increasingly investigated in PNA process, because QS may substantially manipulate the metabolism of microorganisms and overcome the limitations of PNA process. This critical review provides a comprehensive analysis of QS in PNA systems, and identifies the challenges and opportunities for the optimization of PNA process based on QS. The analysis is grouped based on the configurations of PNA process, including partial nitritation, anammox and single-stage PNA systems. QS is confirmed to regulate various properties of PNA systems, including microbial activity, microbial growth rate, microbial aggregation, microbial interactions and the robustness under adverse conditions. Major challenges in the mechanisms of QS, such as QS circuits, target genes and the response to environmental inputs, are identified. Potential applications of QS, such as short-term addition of certain acyl-homoserine lactones (AHLs) or substances containing AHLs, transient unfavorable conditions to stimulate the secretion of AHLs, are also proposed. This review focuses on the theoretical and practical cognation for QS in PNA systems, and serves as a stepping stone for further QS-based strategies to enhance nitrogen removal through PNA process.

Effects of biotin on promoting anammox bacterial activity

Anaerobic ammonium oxidation (anammox) bacteria significantly improve the efficiency and reduce cost of nitrogen removal in wastewater treatment plants. However, their slow growth and vulnerable activity limit the application of anammox technology. In this paper, the enhancement of biotin on the nitrogen removal activity of anammox bacteria in short-term batch experiments was studied. We found that biotin played a significant role in promoting anammox activity within a biotin concentration range of 0.1-1.5 mg/L. At a biotin concentration of 1.0 mg/L, the total nitrogen removal rate (NRR) increased by 112%, extracellular polymeric substance (EPS) secretion and heme production significantly improved, and anammox bacterial biomass increased to maximum levels. Moreover, the predominant genus of anammox bacteria was Candidatus Brocadia.

Influence of biodegradable polybutylene succinate and non-biodegradable polyvinyl chloride microplastics on anammox sludge: Performance evaluation, suppression effect and metagenomic analysis

Microplastics (MPs) has been widely detected in wastewater treatment plants. However, there is a lack of research on its influence on anaerobic ammonia oxidation (anammox) process. Therefore, the effects of polybutylene succinate (PBS) and polyvinyl chloride (PVC) MPs on the nitrogen removal performance, microbial community and metabolites of anammox sludge were investigated. Results showed that PBS and PVC MPs reduced the nitrite removal efficiency of the anammox sludge, and PVC1 (0.1 g/L PVC) group was the most significant at 19.2 %. Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) spectra showed that PBS2 (0.5 g/L PBS) group increased the polysaccharide content in the anammox sludge. This may be because of the byproduct, which was produce during the biodegradation of PBS MPs, and decrease the agglomeration capacity of sludge, so as to increase the mass transfer. PBS2 group reduced the relative abundance of Methanosaeta (10.18 %) and the methane modules, and stimulated the anammox bacteria Ca. Brocadia (1.17 %) and the relative nitrogen metabolism modules. PVC2 group reduced the relative abundance of Ca. Brocadia (3.02 %), while was enriched Methanosaeta (2.1 %). Non-biodegradable PVC MPs was more harmful to anammox sludge, which would draw attention to the entry of PVC MPs into the anammox system.

Effects of Fe3+ on microbial communities shifts, functional genes expression and nitrogen transformation during the start-up of Anammox process

In this study, the effect of Fe³⁺ on the start-up of Anammox process was investigated. Four EGSB reactors were operated with the addition of 0 (R1), 0.04 (R2), 0.08 (R3) and 0.14 (R4) mmol/L Fe³⁺, respectively. The results showed that Fe³⁺ remarkably improved the nitrogen loading rate (NLR) and operation efficiency of the reactor. After 180 days, the influent NH₄⁺-N concentration in the four reactors was 201.4, 301.8, 343.2, 380.2 mg N/L, and the NLR was 589.3, 877.6, 993.0, 1105.8 mg N/(L·d), respectively. And the nitrogen removal rate (NRR) in R2, R3 and R4 was respectively 1.54, 1.73 and 1.94 times of that in R1. High throughput sequencing revealed that Fe³⁺ could promote the enrichment of Anammox bacteria Candidatus Brocadia. Moreover, the analysis by qPCR indicated that the abundance of Anammox 16S rRNA gene and the functional gene hzsB increased, which showed a positive correlation with the concentration of Fe³⁺.

Insight into the benefits of anammox bacteria living as aggregates

This work tried understanding aggregation preference of anammox bacteria from benefit-driven perspective. Aggregated anammox sludge (AGS) gained benefits in specific anammox activity (SAA) (increased by 40.47 ± 12.64%) and in toxicity resistance (enhanced by 65.41%) than scattered anammox sludge (SCS), which were verified by kinetics. The increased heme c content by 35.67 ± 5.77% and enhanced relative abundance of anammox bacteria by 9.29% supported the benefits in biological activity and improved EPS content by 1097.59 ± 43.06% (622.16 ± 61.73% for protein (PN), 2403.47 ± 162.75% for humic acid (HA) and 1145.34 ± 97.33% for polysaccharide (PS)) justified the benefits in toxicity resistance. The diverse microbial communities and organized spatial structures owned by AGS promoted interactions between species, as the intrinsic justification for obtaining the benefits. We expect our findings to provide theoretical guidance for promotions and applications of the anammox process with excellent nitrogen removal capacity and stability.

Effects of loading rates and N/S ratios in the sulfide-dependent autotrophic denitrification (SDAD) and Anammox coupling system

This study investigated the shock resistance and the stability of a novel sulfide-dependent autotrophic denitrification (SDAD) and anaerobic ammonium oxidation (Anammox) coupling process for simultaneous removal of sulfide and nitrogen-containing wastewater in a single reactor. Results show that the total nitrogen (TN) removal efficiency reached 86.7% at a nitrogen loading rate (NLR) of 1.52 kgN m^-3 d^-1. Sulfide was fully oxidized, achieving the removal efficiency of 100% throughout the whole process. Batch tests suggest that Anammox remained dominant with the cooperation of partial SDAD (PSDAD) and could always compete over short-cut SDAD (SSDAD) for nitrite. High-throughput sequencing analysis revealed that Anammox bacteria remained active despite a relatively lower abundance and diversity than denitrifying bacteria. Candidatus Kuenenia might be the main contributor to Anammox, while Thiobacillus and Sulfurimonas were closely related to SDAD.

Deciphering correlation between chromaticity and activity of anammox sludge

The red color is the most striking character of anaerobic ammonium-oxidizing bacteria (AnAOB) which has been used to estimate the anammox activity roughly. However, the quantitative relationship between the color and activity of anammox sludge still remains unknown. In this study, the chromaticity, activity and their correlation were systematically investigated at different steady-state nitrogen loading rates. The chromaticity of anammox sludge was digitalized by the CIE L*a*b* color space. The results revealed that the average chroma value was found to be significantly correlated with specific anammox activity (r = 0.940, p < 0.01) and the cluster centers of chromaticity coordinates (a*, b*) of anammox sludge were established to define the typical working states of anammox system. The visible spectra of anammox sludge were proved to originate from the cytochrome c. The correlation between chroma and heme c concentration of anammox sludge was consistent with the fully-reduced cytochrome c and the chroma was determined by both content and redox ratio of cytochrome c. The chromaticity of anammox sludge was able to be linked with the anammox activity via reduced cytochrome c content. The gene abundance of cytochrome c synthetase linked the chromaticity with AnAOB quantity via total cytochrome c content, while the enzyme activity of octaheme hydrazine dehydrogenase linked the chromaticity with AnAOB activity via reduced cytochrome c ratio. Moreover, the redundancy analysis proved that heme c, as the key component of cytochrome c, was the most important explanatory variable accounting for the maximum 69.6% of the total variation of the anammox community, which correlated positively with the relative abundance of dominant AnAOB (Candidatus Kuenenia). This work aimed at demonstrating the chromaticity of anammox sludge could be developed as an alternative intuitive anammox activity indicator which will promote the monitoring and optimization of anammox process.

Impact of carrier on ammonia and organics removal from zero-discharge marine recirculating aquaculture system with sequencing batch biofilm reactor (SBBR)

Marine recirculating aquaculture system (MRAS) is an effective technology that provides sustainable farming of food fish globally. However, dissolved organics material (chemical oxygen demand, COD) and especially ammonia are produced from uneaten feed and metabolic wastes of fish. To purify the MRAS water, this study adopted a sequencing biofilm batch reactor (SBBR) and comparatively investigated the performances of four different carriers on ammonia and COD removal. Results indicated that the NH₄⁺-N removal rates were 0.045 ± 0.05, 0.065 ± 0.008, 0.089 ± 0.005, and 0.093 ± 0.003 kg/(m³·d), and the COD removal rates were 0.019 ± 0.010, 0.213 ± 0.010, 0.255 ± 0.015, and 0.322 ± 0.010 kg/(m³·d) in the SBBRs packed with porous plastic, bamboo ring, maifan stone, and ceramsite carriers, respectively. Among the four carriers, ceramsite exhibited the best performance for both NH₄⁺-N (80%) and COD (33%) removal after the SBBR reached the steady-state operation conditions. For all carriers studied, the NH₄⁺-N removal kinetics could be well simulated by the first-order model, and the NH₄⁺-N and COD removal rates were logarithmically correlated with the carrier's specific surface area. Due to its high ammonia removal, stable performance and easy operation, the ceramsite-packed SBBR is feasible for MRAS water treatment.

Domestic Sewage Treatment Using a One-Stage ANAMMOX Process

A one-stage anaerobic ammonium oxidation (ANAMMOX) reactor can be quickly started within 40 days by mixing partial nitrifying sludge with ANAMMOX granular sludge with an average temperature of 30 °C. After 70 days of nitrogen load acclimation, Acinetobacter, including Candidatus Kuenenia, became the dominant strain of the system within the reactor, which exhibited high efficiency and a stable nitrogen removal performance. At an influent chemical oxygen demand (COD), NH₄⁺-N content, total nitrogen (TN) content, hydraulic retention time (HRT), temperature, and reactor dissolved oxygen (DO) content of 100, 60, and 70 mg/L, 6 h, 30 ± 1 °C, and below 0.6 mg/L, respectively, the one-stage ANAMMOX reactor could effectively treat domestic sewage on campus. The removal rates of COD, NH₄⁺-N, and TN were approximately 89%, 96.7%, and 70%, respectively.

Insight into the influence of microbial aggregate types on nitrogen removal performance and microbial community in the anammox process - A review and meta-analysis

The anaerobic ammonium oxidation (anammox) process has been paid close attention in the wastewater treatment field because of its energy-saving advantages. Different microbial aggregates have been used in the anammox process, and there is an urgent need to evaluate the comparative efficiencies of the widely used types of microbial aggregates with respect to their nitrogen removal performance as well as microbial community. To address this, 1724 published papers concentrating on three types of microbial aggregates, namely granules, biofilm, and flocs were compiled. A quantitative meta-analysis was carried out to compare the standard error of nitrogen removal efficiencies among these three microbial aggregates. The data sources of this meta-analysis comprised articles on granules (42%), followed by those on biofilm (33%) and flocs (25%). The granular sludge appeared to be competent in achieving the highest average nitrogen removal efficiencies of 81.1%, followed by biofilm (80.8%). Flocs provided comparatively poor removal of nitrogen pollutants with the lowest removal efficiency of 74.1%. Biofilm had the highest abundance of functional microbial communities with 43.4% on Candidatus Kuenenia and 11.2% on Candidatus Brocadia, which were detected in the anammox system as common genera. This meta-analysis suggested that the microbial aggregate types of granules and biofilm had a relatively low heterogeneity and high total nitrogen removal efficiencies for the anammox process and were the recommended microbial aggregates for anammox bacteria cultivation and operation of the anammox process.

Extracellular protein isolation from the matrix of anammox biofilm using ionic liquid extraction

Anaerobic ammonium oxidation (anammox)-performing bacteria self-assemble into compact biofilms by expressing extracellular polymeric substances (EPS). Anammox EPS are poorly characterized, largely due to their low solubility in typical aqueous solvents. Pronase digestion achieved 19.5 ± 0.9 and 41.4 ± 1.4% (w/w) more solubilization of laboratory enriched Candidatus Brocadia sinica anammox granules than DNase and amylase, respectively. Nuclear magnetic resonance profiling of the granules confirmed proteins as dominant biopolymer within the EPS. Ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate and N,N-dimethylacetamide (EMIM-Ac/DMAc) mixture was applied to extract the major structural proteins. Further treatment by anion exchange chromatography isolated homologous serine (S)- and threonine (T)-rich proteins BROSI_A1236 and UZ01_01563, which were major components of the extracted proteins, and sequentially highly similar to putative anammox extracellular proteins KUSTD1514 and WP_070066018.1 of Ca. Kuenenia stuttgartiensis and Ca. Brocadia sapporoensis, respectively. Six monosaccharides (i.e., arabinose, xylose, rhamnose, fucose, galactose, and mannose) were enriched for BROSI_A1236 against all other major proteins. The sugars, however, contributed < 0.5% (w/w) of total granular biomass and were likely co-enriched as glycoprotein appendages. This study demonstrates that BROSI_A1236 is a major extracellular component of Ca. B. sinica anammox biofilms that is likely a common anammox extracellular polymer, and can be isolated from the matrix following ionic liquid extraction.