Microwave assisted alkaline pretreatment to enhance enzymatic saccharification of catalpa sawdust

A comparative study on enhanced enzymatic hydrolysis of diverse herbaceous and woody wastes by promising dilute acid and alkaline pretreatments

Biomass recalcitrance makes pretreatment process a key step for efficient bioconversion process. In this study, differential effects of promising acid (AP) and alkaline pretreatments (ALP) on enzymatic hydrolysis of diverse herbaceous and woody wastes were systematically investigated. Four biomass samples were separately pretreated and sugar recovery was then recorded in the subsequent hydrolysis. Results showed that both dilute AP and ALP exhibited efficacy in the removal of hemicellulose. Specifically, soybean straw AP demonstrated the highest recovery of soluble sugars at the pretreatment stage [270 mg/g raw stalk (RS)], against 71-212 mg/g RS achieved in AP and ALP of other wastes. Compared with herbaceous soybean straw, both AP and ALP of more recalcitrant woody biomass (e.g., bamboo and poplar) showed much lower enzymatic sugar yields. Among tested samples, ALP soybean straw produced stronger structure modification, morphological changes and higher delignification, which increased its availability to cellulases. As a result, the sugar yield of ALP soybean straw using 1.5% NaOH reached 787 mg/g, which is much higher than those of other tested AP & ALP biomass wastes. The present study revealed differential responses of diverse biomass wastes to AP & ALP, hence providing valuable information for the development of effective bioconversion process of these promising biomass. Looking ahead, these classic AP and ALP will be further investigated together with other potential and emerging pretreatments (e.g., green solvent pretreatments) to provide a foundation for high value utilization of biomass.

Hydrothermal pretreatment of food waste enhances performance of anaerobic co-digestion with sludge

Food waste (FW) presents a significant opportunity for renewable energy production through anaerobic digestion (AD) when subjected to appropriate treatment. This study investigates the impact of thermal hydrolysis pretreatment (THP) on FW at varying temperature levels (90 °C, 120 °C, and 140 °C) prior to mesophilic anaerobic co-digestion with sewage sludge (SS). Results demonstrate enhanced FW hydrolysis at 120 °C, leading to a cumulative methane yield of 324.39 ± 4.5 mL/gVSadd, representing a 41.75% increase over untreated FW (228.83 ± 1.13 mL/gVSadd). Shifts in microbial communities, particularly Methanosarcina, Methanobactrium, and Methanobrevibacter, support efficient methanogenesis. Co-digestion of FW pretreated at 120 °C yields maximum energy production of 11.48 MJ/t, a 49.47% improvement compared to untreated processes. The economic analysis underscores the profitability of co-digestion with FW pretreated at 120 °C. These findings highlight the potential for enhanced methane production and energy conversion efficiency with hydrothermally pretreated FW and SS co-digestion.

Microwave-assisted alkali pre-treatment medium for fractionation of rice straw and catalytic conversion to value-added 5-hydroxymethyl furfural and lignin production

In the current study, the use of microwave-assisted sodium hydroxide medium (MWSH) for pre-treatment and saccharification of rice straw to obtain sugar syrup for the production of 5-hydroxymethyl furfural (5-HMF) was investigated. The optimization of the MWSH pre-treatment was carried out using central composite methodology, resulting in a maximum reducing sugar yield of 350 mg/g of treated rice straw (TRS) and a glucose yield of 255 mg/g of TRS under the conditions of a microwave power of 681 W, a NaOH concentration of 0.54 M, and a pre-treatment time of 3 min. Additionally, the microwave assisted transformation of sugar syrup with titanium magnetic silica nanoparticle as catalyst, producing 41.1 % yield of 5-HMF from the sugar syrup after 30 min microwave irradiation at 120 °C with catalyst loading of 2.0:200 (w/v)). The structural characterization of the lignin was analysed using ¹H NMR techniques, and the surface carbon (C1s spectra) and oxygen (O1s spectra) composition changes of the rice straw during pre-treatment were analysed using X-ray photoelectron spectroscopy. The rice straw based bio-refinery process which contains MWSH pretreatment followed by dehydration of sugars achieved high efficiency of 5-HMF production.

High-pressure microwave-assisted pretreatment of softwood, hardwood and non-wood biomass using different solvents in the production of cellulosic ethanol

BACKGROUND

Pretreatment is an indispensable stage of the preparation of lignocellulosic biomass with key significance for the effectiveness of hydrolysis and the efficiency of the production of cellulosic ethanol. A significant increase in the susceptibility of the raw material to further degradation can be attained as a result of effective delignification in high-pressure conditions. With this in mind, a method of high-pressure pretreatment using microwave radiation and various solvents (water, 40% w/v NaCS, 1% v/v H₂SO₄, 1% w/v NaOH or 60% v/v EtOH with an addition of 1% v/v H₂SO₄) was developed, enabling the acquisition of biomass with an increased susceptibility to the process of enzymatic hydrolysis. The medium obtained in this way can be used for the production of cellulosic ethanol via high-gravity technology (lignocellulosic media containing from 15 to 20% dry weight of biomass). For every type of biomass (pine chips, beech chips and wheat straw), a solvent was selected to be used during the pretreatment, guaranteeing the acquisition of a medium highly susceptible to the process of enzymatic hydrolysis.

RESULTS

The highest efficiency of the hydrolysis of biomass, amounting to 71.14 ± 0.97% (glucose concentration 109.26 ± 3.49 g/L) was achieved for wheat straw subjected to microwave-assisted pretreatment using 40% w/v NaCS. Fermentation of this medium produced ethanol concentration at the level of 53.84 ± 1.25 g/L. A slightly lower effectiveness of enzymatic hydrolysis (62.21 ± 0.62%) was achieved after high-pressure microwave-assisted pretreatment of beech chips using 1% w/v NaOH. The hydrolysate contained glucose in the concentration of 91.78 ± 1.91 g/L, and the acquired concentration of ethanol after fermentation amounted to 49.07 ± 2.06 g/L. In the case of pine chips, the most effective delignification was achieved using 60% v/v EtOH with the addition of 1% v/v H₂SO₄, but after enzymatic hydrolysis, the concentration of glucose in hydrolysate was lower than in the other raw materials and amounted to 39.15 ± 1.62 g/L (the concentration of ethanol after fermentation was ca. 19.67 ± 0.98 g/L). The presence of xylose and galactose was also determined in the obtained fermentation media. The highest initial concentration of these carbohydrates (21.39 ± 1.44 g/L) was observed in beech chips media after microwave-assisted pretreatment using NaOH. The use of wheat straw after pretreatment using EtOH with an addition of 1% v/v H₂SO₄ for the preparation of fermentation medium, results in the generation of the initial concentration of galactose and xylose at the level of 19.03 ± 0.38 g/L.

CONCLUSION

The achieved results indicate a high effectiveness of the enzymatic hydrolysis of the biomass subjected to high-pressure microwave-assisted pretreatment. The final effect depends on the combined use of correctly selected solvents for the different sources of lignocellulosic biomass. On the basis of the achieved results, we can say that the presented method indicates a very high potential in the area of its use for the production of cellulosic ethanol involving high-gravity technology.

Pigment Production by Paracoccus spp. Strains through Submerged Fermentation of Valorized Lignocellulosic Wastes

Due to the increasing emphasis on the circular economy, research in recent years has focused on the feasibility of using biomass as an alternative energy source. Plant biomass is a potential substitute for countering the dependence on depleting fossil-derived energy sources and chemicals. However, in particular, lignocellulosic waste materials are complex and recalcitrant structures that require effective pretreatment and enzymatic saccharification to release the desired saccharides, which can be further fermented into a plethora of value-added products. In this context, pigment production from waste hydrolysates is a viable ecological approach to producing safe and natural colorings, which are otherwise produced via chemical synthesis and raise health concerns. The present study aims to evaluate two such abundant lignocellulosic wastes, i.e., wheat straw and pinewood sawdust as low-cost feedstocks for carotenoid production with Paracoccus strains. An alkali pretreatment approach, followed by enzymatic saccharification using an indigenous lab-isolated fungal hydrolase, was found to be effective for the release of fermentable sugars from both substrates. The fermentation of the pretreated sawdust hydrolysate by Paracoccus aminophilus CRT1 and Paracoccus kondratievae CRT2 resulted in the highest carotenoid production, 631.33 and 758.82 μg/g dry mass, respectively. Thus, the preliminary but informative research findings of the present work exhibit the potential for sustainable and economically feasible pigment production from lignocellulosic feedstocks after optimal process development on the pilot scale.

Prospects of utilizing seawater as a reaction medium for pretreatment and saccharification of rice straw

The transition towards a bio-based economy has led to an unprecedented surge in fresh water consumption that renders biofuel a high water footprint product. The depleting fresh water resources have exacerbated the situation which necessitates the exploration of non-potable water for biorefinery purposes. In the current study, seawater is used as a plausible alternative reaction medium for pretreatment and saccharification of rice straw. Response Surface Methodology (RSM) based on Box-Behnken Design (BBD) was employed to model, predict and validate cellulose release and reducing sugar yield from rice straw subjected to microwave-NaOH pretreatment. The optimized pretreatment conditions were determined to be 8.54% substrate loading, 1.94% NaOH and 4.09 min which resulted in the maximum cellulose release of 65.43% and reducing sugar yield of 0.554 g/g. Several physico-chemical studies of the raw and pretreated biomass were carried out using bomb calorimetry, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) analysis and thermal gravimetric analysis (TGA) to examine the efficacy of pretreatment. Evidences of an apparent delignification was substantiated by the increase in surface area from 7.719 to 44.188 m² g^-1and pore volume from 0.039 to 0.071 mlg^-1 which was consistent with the decrease in energy density and distorted surface morphology of the pretreated biomass. Further, the FTIR revealed a reduced peak in the absorption spectral bands at 1636 cm^-1 which confirmed the pretreatment mediated degradation of lignin and hemicellulose. This finding provides evidence on the prospects of utilizing abundantly available seawater resource as a reaction medium for sustainable biofuel production.

Comparison of the effects of different pretreatments on the structure and enzymatic hydrolysis of Miscanthus

Miscanthus is regarded as a desired bioenergy crop with enormous lignocellulose residues for biofuels and other chemical products. In this study, the effect of different pretreatments (including microwave, NaOH, CaO, and microwave + NaOH/CaO) on sugar yields was investigated, leading to largely varied hexose yields at 4.0-73.4% (% cellulose) released from enzymatic hydrolysis of pretreated Miscanthus residues. Among them, the highest yield of 73.4% for hexoses was obtained from 12% NaOH (w/v) solution pretreatment, whereas 1% CaO (w/w) and microwave pretreatment resulted in a lower hexose yield than the control (without pretreatment). The sugar yield from microwave followed with 1% NaOH pretreatment was 4.3 times higher than that of microwave followed with 1% CaO. However, the enzymatic hydrolysis efficiencies of the sample were 15.2% and 58.5% under microwave pretreatment followed by 12% NaOH or 12.5% CaO, respectively, which were lower than those of the same concentration of alkali (NaOH and CaO) pretreatments. To investigate the mechanism of varied enzymatic saccharification under different pretreatments, the changes in the surface structure and porosity of the Miscanthus-pretreated lignocelluses were studied by means of Fourier transform infrared, Congo red staining, and scanning electron microscopy analysis. The results show that the different pretreatments destroy the cell wall cladding structure and reduce the bonding force between cellulose, hemicellulose, and lignin to different degrees, therefore increasing the accessibility of cellulose and enhancing cellulose digestion.

Novel betaine-amino acid based natural deep eutectic solvents for enhancing the enzymatic hydrolysis of corncob

A novel natural deep eutectic solvent (NDES) with water content ranging from 65 to 93 wt%, in which betaine (Bet) acts as the cation and amino acids (AAs) as the anions, was prepared by a simple and green chemical route. [Bet][AA] NDES showed excellent xylan and lignin solubility, however, scare cellulose solubility. A mild and facile pretreatment process with [Bet][AA] NDES was carried out at 60 °C for 5 h. The enzymatic hydrolysis efficiency of cellulose and corncob was significantly improved. Detailed characterization showed that the enhancement of cellulose digestibility derived mainly from xylan and lignin removal. Xylan and lignin removal for [Bet][Lys]-W87 was 47.68 and 49.06%, while it was 42.20% and 57.01% for [Bet][Arg]-W82, respectively. FT-IR, SEM, XRD, and HSQC NMR studies confirmed the effectiveness and mechanism of [Bet][Lys]-W87 and [Bet][Arg]-W82 on biomass pretreatment.

Bioconversion of bamboo shoot shell to methane assisted by microwave irradiation and fungus metabolism

Bamboo shoot shell (BSS), a major byproduct from bamboo shoot industries with a high amount of output annually, needs to be sustainably management due to its impact on environment and human health. Anaerobic digestion is an eco-friendly and sustainable option, but its efficiency is limited by recalcitrance of lignocellulose structure. A cascade pretreatment (CP) using microwave irradiation and fungus metabolism was developed in this work to reduce the recalcitrance of BSS and enhance its methane production. The results showed significant synergistic effects of microwave irradiation and fungus metabolism on anaerobic digestion of BBS. The methane yield by CP increased by 162.9% (reached to 223.4 mL/g VS) when compared to control group. This was higher than both the values of fungal pretreatment (101.0 mL/g VS, 18.9% increase), and microwave pretreatment (110.5 mL/g VS, 30.1% increase) alone. Further mechanisms of the synergistic effects were revealed. Microwave irradiation provided dissolved products and more accessible BBS for fungus action. In particular, the GC-MS analysis indicated the dissolved products induced fungal laccase activity effectively, and the highest activity in CP was 1.91-fold higher than that in fungal pretreatment alone. The fungus in cascade process further increased accessible surface area and reducing sugars (20.2-43.2%, which compared to fungal pretreatment alone), and reduced significantly the lignin content (42.2-49.1%) and crystallinity (4.5-8.1%) of BSS.

Enhanced anaerobic digestion performance by two artificially constructed microbial consortia capable of woody biomass degradation and chlorophenols detoxification

Catalpa sawdust (CSW) is a promising biomass-based biofuel. However, the complex lignocellulosic structure limits its efficient utilization in biorefinery applications. It is even more so when chlorophenols (CPs), highly toxic organic substances widely used as wood preservatives, are present. Hence, it is crucial to develop effective and eco-friendly approaches to attain deconstruction of lignocellulose and chlorophenols simultaneously as well as to improve methane (CH4) production efficiently. This study might be the first to explore the performance of the novel constructed microbial consortia CS-5 and BC-4 on woody biomass degradation and CPs detoxification simultaneously with CH4 production. After the degradation of CSW and CPs for 15 days by C5-5 or BC-4, significant reduction in lignocellulosic components and CPs mixture was realized with a total weight loss of 69.2 and 56.3 % and CPs degradation of 89 and 95 %, respectively. The toxicity of individual or mixed CPs after 15 days of degradation was reduced by approximately 90 %. The synergistic action of CS-5 and BC-4 enhanced biogas and CH4 yields over 76 and 64 % respectively, higher than control. Furthermore, CH4 production increased by 113.7 % at the peak phase of AD process. Methanosataceae represented 45.1 % of the methanogenic Archaea in digester G-III.

A Two-Step Ferric Chloride and Dilute Alkaline Pretreatment for Enhancing Enzymatic Hydrolysis and Fermentable Sugar Recovery from Miscanthus sinensis

A two-step process was proposed to enhance enzymatic hydrolysis of Miscanthus sinensis based on a comparative study of acid/alkaline pretreatments. Ferric chloride pretreatment (FP) effectively removed hemicellulose and recovered soluble sugars, but the enzymatic hydrolysis was not efficient. Dilute alkaline pretreatment (ALP) resulted in much better delignification and stronger morphological changes of the sample, making it more accessible to enzymes. While ALP obtained the highest sugar yield during enzymatic hydrolysis, the soluble sugar recovery from the pretreatment stage was still limited. Furthermore, a two-step ferric chloride and dilute alkaline pretreatment (F-ALP) has been successfully developed by effectively recovering soluble sugars in the first FP step and further removing lignin of the FP sample in the second ALP step to improve its enzymatic hydrolysis. As a result, the two-step process yielded the highest total sugar recovery (418.8 mg/g raw stalk) through the whole process.

Construction of novel microbial consortia CS-5 and BC-4 valued for the degradation of catalpa sawdust and chlorophenols simultaneously with enhancing methane production

This study might be the first to explore the novel constructed microbial consortia CS-5 and BC-4 for enhancing methane (CH₄) production during anaerobic digestion (AD) with simultaneous degradation of catalpa sawdust and chlorophenols (CPs). Significant reduction in cellulose, hemicellulose and lignin contents was achieved after the biodegradation of catalpa sawdust for 15 days by CS-5 and BC-4, with a total weight loss of 69.2 and 56.3%, respectively. The synergistic microbial consortia enhanced cumulative biogas and CH₄ yields by 76.3 and 64.3%, respectively higher than the corresponding control at the end of AD. More than 90% of CH₄ was produced within 18 days of AD as a result of microbial pretreatment of catalpa sawdust. These consortia resulted in remarkably higher energy conversion efficiency of 44.3% (218.1 L_N CH₄/kg TS) over the control. CS-5 and BC-4 removed more than 69 and 77% of the total amount of CPs tested after 15 days.

Rice husk-based solid acid for efficient hydrolysis and saccharification of corncob

This work studied preparation of rice husk-based solid acid and its application for efficient hydrolysis and saccharification of corncob. Rice husk-based solid acid (RH-SO₃H) was prepared by one-step carbonization and sulfonation method. Analysis demonstrated that RH-SO₃H exhibited aromatic carbon sheets structure bearing -SO₃H, -COOH and -OH groups. The RH-SO₃H was then used to hydrolyse and saccharify corncob. Compared with solid acids made from activated carbon and microcrystalline cellulose, the RH-SO₃H showed the highest catalytic efficiency with the maximum reducing sugar yield of 486.53 mg/g and xylose of 253.03 mg/g, which was twice and five times higher than that of control, respectively. Its high efficiency was attributed to -OH and -COOH groups functioned synergistically with -SO₃H to hydrolyse lignocellulose by adsorbing β-1,4-glucan in corncob. This study provides a green and effective utilization technology of lignocellulosic biomass.

Enhanced Enzymatic Hydrolysis of Pennisetum alopecuroides by Dilute Acid, Alkaline and Ferric Chloride Pretreatments

In this study, effects of different pretreatment methods on the enzymatic digestibility of Pennisetum alopecuroides, a ubiquitous wild grass in China, were investigated to evaluate its potential as a feedstock for biofuel production. The stalk samples were separately pretreated with H₂SO₄, NaOH and FeCl₃ solutions of different concentrations at 120 °C for 30 min, after which enzymatic hydrolysis was conducted to measure the digestibility of pretreated samples. Results demonstrated that different pretreatments were effective at removing hemicellulose, among which ferric chloride pretreatment (FCP) gave the highest soluble sugar recovery (200.2 mg/g raw stalk) from the pretreatment stage. In comparison with FCP and dilute acid pretreatment (DAP), dilute alkaline pretreatment (DALP) induced much higher delignification and stronger morphological changes of the biomass, making it more accessible to hydrolysis enzymes. As a result, DALP using 1.2% NaOH showed the highest total soluble sugar yield through the whole process from pretreatment to enzymatic hydrolysis (508.5 mg/g raw stalk). The present work indicates that DALP and FCP have the potential to enhance the effective bioconversion of lignocellulosic biomass like P. alopecuroides, hence making this material a valuable and promising energy plant.

Zirconium based metal-organic framework in-situ assisted hydrothermal pretreatment and enzymatic hydrolysis of Platanus X acerifolia exfoliating bark for bioethanol production

Metal-organic framework (MOF) assisted hydrothermal pretreatment and co-catalysis strategy based on UiO-66 MOF is developed for the first time. The Planetree exfoliating bark was pretreated with or without UiO-66 assisted hydrothermal method at a temperature ranging from 160 to 240 °C for 1-3 h residence. With the rise of pretreatment severity, the total reducing sugar (TRS) was increased till reached maximum, 180 mg g^-1, in the presence of UiO-66. The fitting models validate the optimal hydrothermal condition was at 180 °C and 1 h, which was characterized with high TRS and very low yield of furfural and HMF. The TRS from enzymatic hydrolysis reaches maximum, 391 mg g^-1, in the presence of MOF co-catalysis and the maximum ethanol yield achieved was 73%. Altered morphology, higher surface area and porosity are noticed after MOF assisted hydrothermal pretreatment. This study insights the MOFs' application in lignocellulose biomass processing.

Xylan in the Middle: Understanding Xylan Biosynthesis and Its Metabolic Dependencies Toward Improving Wood Fiber for Industrial Processing

Lignocellulosic biomass, encompassing cellulose, lignin and hemicellulose in plant secondary cell walls (SCWs), is the most abundant source of renewable materials on earth. Currently, fast-growing woody dicots such as Eucalyptus and Populus trees are major lignocellulosic (wood fiber) feedstocks for bioproducts such as pulp, paper, cellulose, textiles, bioplastics and other biomaterials. Processing wood for these products entails separating the biomass into its three main components as efficiently as possible without compromising yield. Glucuronoxylan (xylan), the main hemicellulose present in the SCWs of hardwood trees carries chemical modifications that are associated with SCW composition and ultrastructure, and affect the recalcitrance of woody biomass to industrial processing. In this review we highlight the importance of xylan properties for industrial wood fiber processing and how gaining a greater understanding of xylan biosynthesis, specifically xylan modification, could yield novel biotechnology approaches to reduce recalcitrance or introduce novel processing traits. Altering xylan modification patterns has recently become a focus of plant SCW studies due to early findings that altered modification patterns can yield beneficial biomass processing traits. Additionally, it has been noted that plants with altered xylan composition display metabolic differences linked to changes in precursor usage. We explore the possibility of using systems biology and systems genetics approaches to gain insight into the coordination of SCW formation with other interdependent biological processes. Acetyl-CoA, s-adenosylmethionine and nucleotide sugars are precursors needed for xylan modification, however, the pathways which produce metabolic pools during different stages of fiber cell wall formation still have to be identified and their co-regulation during SCW formation elucidated. The crucial dependence on precursor metabolism provides an opportunity to alter xylan modification patterns through metabolic engineering of one or more of these interdependent pathways. The complexity of xylan biosynthesis and modification is currently a stumbling point, but it may provide new avenues for woody biomass engineering that are not possible for other biopolymers.

Complementary effect of combined bacterial-chemical pretreatment to promote enzymatic digestibility of lignocellulose biomass

Chemical pretreatment partially modified the structure of lignocellulose to enhance saccharification, leaving unaltered factors to limit further hydrolysis. To overcome these limitations, a biostrategy involving co-pretreatment combining bacteria with a chemical process was developed. A significant complementary effect was observed in specific co-pretreatments, e.g., ligninolytic bacteria enhanced acid pretreatment and saccharolytic bacteria enhanced alkaline pretreatment. Specifically, the ligninolytic bacterium Pandoraea sp. B-6 selectively removed the acidolysis-caused residual lignin and enhanced sugar release by 40.9% to 772.0 mg g^-1 compared with that of acid-treated rice straw. After most of the lignin was removed, sugar release from alkali-treated RS was further improved by 31.8% to 820.2 mg g^-1 via the saccharolytic bacterium Acinetobacter sp. B-2 through decrystallization. In the complementary mechanism, the active sites produced by chemical cleavage facilitated the bioprocess and further enhanced saccharification. This complementary mechanism provides a novel foundation for designing a rational combination pretreatment.

A microwave-assisted aqueous ionic liquid pretreatment to enhance enzymatic hydrolysis of Eucalyptus and its mechanism

A novel pretreatment strategy based on combination of microwave and ionic liquid [TBA][OH] was developed for enhancing enzymatic hydrolysis of Eucalyptus sawdust. The sugar yield of pretreated sample achieved 410.67 mg/g in 48 h, which suffered from optimized microwave-assisted [TBA][OH] pretreatment. The work mechanism was illuminated by chemical composition, Fourier transform infrared spectroscopy (FTIR), ¹³C cross polarization/magic-angle spinning solid state NMR (¹³C solid NMR), X-ray diffraction (XRD) and scanning electron microscope (SEM) analyses. The combined effect of microwave and [TBA][OH] leads to the violent deconstruction of lignin, removal of hemicelluloses, destruction of crystalline region and an eroded, pored and irregular micro-morphology. As a green, relatively inexpensive and high efficient pretreatment, microwave-assisted [TBA][OH] pretreatment has great potential in the field of bio-refinery.

A new approach for bioethanol production from sugarcane bagasse using hydrodynamic cavitation assisted-pretreatment and column reactors

Hydrodynamic cavitation (HC) was adopted to assist alkaline-hydrogen peroxide pretreatment of sugarcane bagasse (SCB). In the following condition: 0.29 M of NaOH, 0.78% (v/v) of H₂O₂, 9.95 min of process time and 3 bar of inlet pressure, 95.4% of digestibility of cellulosic fraction was achieved. To take the best use of the pretreated biomass, the overall process was intensified by way of employing a packed bed flow-through column reactor and thus enabling to handle a high solid loading of 20%, thereby leading to cellulose and hemicellulose conversions to 74.7% and 75%, respectively. In the fermentation step, a bubble column reactor was introduced to maximize ethanol production from the pretreated SCB by Scheffersomyces stipitis NRRL-Y7124, resulting in 31.50 g/L of ethanol, 0.49 g/g of ethanol yield and 0.68 g/L.h of productivity. All this showed that our HC-assisted NaOH-H₂O₂ pretreatment strategy along with the process intensification approach might offer an option for SCB-based biorefineries.

Comparison of ultrasound-assisted ionic liquid and alkaline pretreatment of Eucalyptus for enhancing enzymatic saccharification

Two ultrasound-assisted pretreatment technologies, ultrasound-assisted alkaline and ultrasound-assisted aqueous ionic liquid tetrabutylammonium hydroxide ([TBA][OH]), are compared systematically in regard to enzymatic saccharification. Pretreated Eucalyptus samples were characterized by powder X-ray diffraction, ¹³C cross polarization/magic-angle spinning solid state NMR spectroscopy, Fourier transform infrared spectroscopy, Scanning electron microscope (SEM) and chemistry composition analysis. These results not only explain the enzymatic saccharification difference between samples from the microstructure level, but also provide helpful information for relevant pretreatment research. Ultrasound-assisted [TBA][OH] pretreatment acquired a significant enhancement in the initial enzymatic rate of cellulose (79.39 mg/g/h), and a reducing sugar yield of 426.6 mg/g at 48 h. The pretreatment combining inexpensive aqueous ionic liquid and ultrasound may provide a promising strategy in the field of bio-refinery because of its unique advantages.

Comparison of various pretreatments for ethanol production enhancement from solid residue after rumen fluid digestion of rice straw

The rumen digested residue of rice straw contains high residual carbohydrates, which makes it a potential cellulosic ethanol feedstock. This study evaluated the feasibility and effectiveness of applying microwave assisted alkali (MAP), ultrasound assisted alkali (UAP), and ball milling pretreatment (BMP) to enhance ethanol production from two digested residues (2.5%-DR and 10%-DR) after rumen fluid digestion of rice straw at 2.5% and 10.0% solid content. Results revealed that 2.5%-DR and 10%-DR had a cellulose content of 36.4% and 41.7%, respectively. MAP and UAP improved enzymatic hydrolysis of digested residue by removing the lignin and hemicellulose, while BMP by decreasing the particle size and crystallinity. BMP was concluded as the suitable pretreatment, resulting in an ethanol yield of 116.65 and 147.42mgg^-1 for 2.5%-DR and 10%-DR, respectively. The integrated system including BMP for digested residue at 2.5% solid content achieved a maximum energy output of 7010kJkg^-1.

Microwave-assisted inorganic salt pretreatment of sugarcane leaf waste: Effect on physiochemical structure and enzymatic saccharification

This paper presents a method to pretreat sugarcane leaf waste using microwave-assisted (MA) inorganic salt to enhance enzymatic saccharification. The effects of process parameters of salt concentration, microwave power intensity and pretreatment time on reducing sugar yield from sugarcane leaf waste were investigated. Pretreatment models based on MA-NaCl, MA-ZnCl₂ and MA-FeCl₃ were developed with high coefficients of determination (R² >0.8) and optimized. Maximum reducing sugar yield of 0.406g/g was obtained with 2M FeCl₃ at 700W for 3.5min. Scanning electron microscopy (SEM), Fourier Transform Infrared analysis (FTIR) and X-ray diffraction (XRD) showed major changes in lignocellulosic structure after MA-FeCl₃ pretreatment with 71.5% hemicellulose solubilization. This regime was further assessed on sorghum leaves and Napier grass under optimal MA-FeCl₃ conditions. A 2-fold and 3.1-fold increase in sugar yield respectively were observed compared to previous reports. This pretreatment was highly effective for enhancing enzymatic saccharification of lignocellulosic biomass.