Sustainable biobutanol production from pineapple waste by using Clostridium acetobutylicum B 527: Drying kinetics study

Sustainable biosynthesis of lycopene by using evolutionary adaptive recombinant Escherichia coli from orange peel waste

This study aimed to evaluate the hydrolysates from orange peel waste (OPW) as the low-cost carbon source for lycopene production. Initially, the dilute acid pretreatment combined with enzymatic hydrolysis of OPW resulted in a total sugar concentration of 62.18 g/L. Meanwhile, a four-month adaptive laboratory evolution (ALE) experiment using a d-galacturonic acid minimal medium resulted in an improvement in the growth rate of our previously engineered Escherichia coli strain for lycopene production. After evolutionary adaptation, response surface methodology (RSM) was adapted to optimize the medium composition in fermentation. The results obtained from RSM analysis revealed that the 5.53 % carbon source of orange peel hydrolysate (OPH), 6.57 g/L nitrogen source, and 30 °C temperature boosted lycopene production in the final strain. Subsequently, the optimized treatment for lycopene fermentation was then conducted in a 5 L batch fermenter under the surveillance of a kinetic model that uses the Logistic equation for strain growth (μm = 0.441 h-1), and Luedeking-Piret equations for lycopene production (Pm = 1043 mgL-1) with growth rate constant (α = 0.1491). At last, lycopene biosynthesized from OPH was extracted and analyzed for qualitative validation. Likewise, its data on phytic acid (between 1.01 % and 0.86 %) and DPPH radical scavenging (between 38.06 % and 29.08 %) highlighted the better antioxidant capacity of lycopene. In conclusion, the OPH can be used as a fermentation feedstock which opens new possibilities of exploiting fruit crop residues for food and pharmaceutical applications.

Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste

New materials' synthesis and utilization have shown many critical challenges in healthcare and other industrial sectors as most of these materials are directly or indirectly developed from fossil fuel resources. Environmental regulations and sustainability concepts have promoted the use of natural compounds with unique structures and properties that can be biodegradable, biocompatible, and eco-friendly. In this context, nanocellulose (NC) utility in different sectors and industries is reported due to their unique properties including biocompatibility and antimicrobial characteristics. The bacterial nanocellulose (BNC)-based materials have been synthesized by bacterial cells and extracted from plant waste materials including pineapple plant waste biomass. These materials have been utilized in the form of nanofibers and nanocrystals. These materials are found to have excellent surface properties, low density, and good transparency, and are rich in hydroxyl groups for their modifications to other useful products. These materials are well utilized in different sectors including biomedical or health care centres, nanocomposite materials, supercapacitors, and polymer matrix production. This review explores different approaches for NC production from pineapple waste residues using biotechnological interventions, approaches for their modification, and wider applications in different sectors. Recent technological developments in NC production by enzymatic treatment are critically discussed. The utilization of pineapple waste-derived NC from a bioeconomic perspective is summarized in the paper. The chemical composition and properties of nanocellulose extracted from pineapple waste may have unique characteristics compared to other sources. Pineapple waste for nanocellulose production aligns with the principles of sustainability, waste reduction, and innovation, making it a promising and novel approach in the field of nanocellulose materials.

Nutritional enrichment of fruit peel wastes using lipid accumulating Aurantiochytrium strain as feed for aquaculture in the North-East Region of India

Utilization of fruit peel wastes to grow thraustochytrids for nutritional enrichment of wastes will lower environmental and economic costs associated with feedstock specific for aquaculture industries. In this study, high-carbohydrate content agricultural wastes, such as orange, pineapple, banana, and mausambi fruit peels were enriched with essential fatty acids producing thraustochytrids Aurantiochytrium sp. ATCC276. Characterizations of fruit peels revealed the presence of high carbohydrate content (9-16%) and reducing sugars essential for the growth of thraustochytrids. Optimization for lipid production of Aurantiochytrium sp. ATCC276 was carried out using response surface methodology (RSM) in combination with different concentrations of fruit peels in solid-state fermentation (SSF) conditions. Fruit peels composed of SSF experiments were designed using a central composite design. Aurantiochytrium sp. ATCC276 cells efficiently utilized the sugar components of fruit peels for their growth and lipid accumulation. Different SSF composites made of fruit peels were significantly enriched with fatty acids of Aurantiochytrium sp. ATCC276 cells. Culturing Aurantiochytrium sp. ATCC276 cells with these waste materials demonstrated distinct responses towards lipid accumulation at different compositions. The optimized SSF composite consists of 9.91 g 100 mL-1 orange, 5 g 100 mL-1 mausambi, 4.12 g 100 mL-1 pineapple, and 8.01 g 100 mL-1 banana peels and was enriched with 8.37% of Aurantiochytrium sp. ATCC276-derived lipids. This study expands the benefits and bioprocessing potential of essential fatty acids producing Aurantiochytrium sp. ATCC276 along with fruit peel wastes which a frontier in circular bioeconomy and valorizing waste for usage.

Exploring pineapple peel hydrolysate as a sustainable carbon source for xylitol production

This study explores utilizing pineapple peel (PP) hydrolysate as a promising carbon source for xylitol production, covering scopes from the pre-treatment to the fermentation process. The highest xylose concentration achieved was around 20 g/L via mild acid hydrolysis (5% nitric acid, 105 °C, 20-min residence time) with a solid loading of 10%. Two sets fermentability experiments were carried out of varying pH levels in synthetic media that includes acetic acid as the main inhibitors and hydrolysate supplemented with diverse nitrogen source. The results revealed that pH 7 exhibited the highest xylitol production, yielding 0.35 g/g. Furthermore, urea was found to be a highly promising and cost-effective substitute for yeast extract, as it yielded a comparable xylitol production of 0.31 g/g with marginal difference of only 0.01 g/g compared to yeast extract further highlights the viability of urea as the preferred option for reducing xylitol production cost. The absence of a significant difference between the synthetic media and hydrolysate, with only a marginal variance of 0.35 to 0.32 g/g, implies that acetic acid is indeed the primary constraint in xylitol production using PP hydrolysate. The study sheds light on PP biomass's potential for xylitol production, aligning economic benefits with environmental sustainability and waste management.

A Review on Opportunities and Limitations of Membrane Bioreactor Configuration in Biofuel Production

Biofuels are a clean and renewable source of energy that has gained more attention in recent years; however, high energy input and processing cost during the production and recovery process restricted its progress. Membrane technology offers a range of energy-saving separation for product recovery and purification in biorefining along with biofuel production processes. Membrane separation techniques in combination with different biological processes increase cell concentration in the bioreactor, reduce product inhibition, decrease chemical consumption, reduce energy requirements, and further increase product concentration and productivity. Certain membrane bioreactors have evolved with the ability to deal with different biological production and separation processes to make them cost-effective, but there are certain limitations. The present review describes the advantages and limitations of membrane bioreactors to produce different biofuels with the ability to simplify upstream and downstream processes in terms of sustainability and economics.

Current Technologies and Uses for Fruit and Vegetable Wastes in a Sustainable System: A Review

The fruit and vegetable industry produces millions of tons of residues, which can cause large economic losses. Fruit and vegetable wastes and by-products contain a large number of bioactive substances with functional ingredients that have antioxidant, antibacterial, and other properties. Current technologies can utilize fruit and vegetable waste and by-products as ingredients, food bioactive compounds, and biofuels. Traditional and commercial utilization in the food industry includes such technologies as microwave-assisted extraction (MAE), supercritical fluid extraction (SFE), ultrasonic-assisted extraction (UAE), and high hydrostatic pressure technique (HHP). Biorefinery methods for converting fruit and vegetable wastes into biofuels, such as anaerobic digestion (AD), fermentation, incineration, pyrolysis and gasification, and hydrothermal carbonization, are described. This study provides strategies for the processing of fruit and vegetable wastes using eco-friendly technologies and lays a foundation for the utilization of fruit and vegetable loss/waste and by-products in a sustainable system.

Microbial biotechnology approaches for conversion of pineapple waste in to emerging source of healthy food for sustainable environment

One of the most significant and difficult jobs in food sustainability, is to make use of waste in the vegetable and fruit processing sectors. The discarded fruits along with their waste materials, is anticipated to have potential use for further industrial purposes via extraction of functional ingredients, extraction of bioactive components, fermentation. As a result of its abundant availability, simplicity and safe handling, and biodegradability, pineapple waste is now the subject of extensive research. It is regarded as a resource for economic development. This vast agro-industrial waste is being investigated as a low-cost raw material to produce a variety of high-value-added goods. Researchers have concentrated on the exploitation of pineapple waste, particularly for the extraction of prebiotic oligosaccharides as well as bromelain enzyme, and as a low-cost source of fibre, biogas, organic acids, phenolic antioxidants, and ethanol. Thus, this review emphasizes on pineapple waste valorisation approaches, extraction of bioactive and functional ingredients together with the advantages of pineapple waste to be used in many areas. From the socioeconomic perspective, pineapple waste can be a new raw material source to the industries and may potentially replace the current expensive and non-renewable sources. This review summarizes various approaches used for pineapple waste processing along with several important value-added products gained which could contribute towards healthy food and a sustainable environment.

Influence of Ultrasound Application in Fermented Pineapple Peel on Total Phenolic Content and Antioxidant Activity

Antioxidant phenolic compounds were extracted from fermented samples of Golden pineapple peels via an ultrasound method. The fermentation conditions to maximize the production of phenolic content and antioxidant activity were previously determined (pH: 5.5, T: 37.3 °C and 85% moisture content). A central composite design with 20 treatments was applied to evaluate the effect of the ethanol concentration, time, and temperature on the production of phenolic compounds and antioxidant activity of the extracts. The statistical analysis showed that the optimal conditions to produce extracts with high phenolic content and antioxidant activity were: 62 °C, 30 min and 58% ethanol. We obtained 866.26 mg gallic acid equivalents (GAE)/g d.m in total phenolic content and for antioxidant activity expressed as percentage inhibition, 80.06 ± 1.02% for ABTS and 63.53 ± 2.02% for DPPH, respectively. The bioactive compound profile in the extracts was identified and quantified using ultra-high performance liquid chromatography (UHPLC), this method showed the presence of rosmarinic acid, caffeic acid, vanillic acid, p-coumaric acid, ferulic acid, quercetin-3 glucoside, rutine, quercetin, kaempherol-3 glucoside and gallic acid, demonstrating the great potential of these by-products to obtain components that can benefit the consumer’s health.

Sustainable utilization of pineapple wastes for production of bioenergy, biochemicals and value-added products: A review

Agricultural residues play a pivotal role in meeting the growing energy and bulk chemicals demand and food security of society. There is global concern about the utilization of fossil-based fuels and chemicals which create serious environmental problems. Biobased sustainable fuels can afford energy and fuels for future generations. Agro-industrial waste materials can act as the alternative way for generating bioenergy and biochemicals strengthening low carbon economy. Processing of pineapple generates about 60% of the weight of the original pineapple fruit in the form of peel, core, crown end, and pomace that can be converted into bioenergy sources like bioethanol, biobutanol, biohydrogen, and biomethane along with animal feed and vermicompost as described in this paper. This paper also explains about bioconversion process towards the production of various value-added products such as phenolic anti-oxidants, bromelain enzyme, phenolic flavour compounds, organic acids, and animal feed towards bioeconomy.

State of art of valorising of diverse potential feedstocks for the production of alcohols and ethers: Current changes and perspectives

Alcohols could be the biggest factor for the improvement of world biofuel economy in the present century due to their excellent properties compared to petroleum products. The primary concerns of sustainable alcohol production for meeting the growing energy demand owing to the selection of viable feedstock and this might enhance the opportunities for developing numerous advanced techniques. In this review, the valorization of alcohol production from several production routes has been exposed by covering the traditional routes to the present state of the art technologies. Even though the fossil fuel conversion could be dominant method for methanol production, many recent innovations like photo electrochemical synthesis and electrolysis methods might play vital role in production of renewable methanol in future. There have been several production routes for production of ethanol and among which the fermentation of lignocellulose biomass would be the ultimate choice for large scale shoot up. The greenhouse gas recovery in the form of alcohols through electrochemistry technique and hydrogenation method are the important methods for commercialization of alcohols in future. It is also observed that algae based renewable bio-alcohols is highly influenced by carbohydrate content and sustainable approaches in algae conversion to bio-alcohols would bring greater demand in future market. There is a lack of innovation in higher alcohols production in single process and this could be bounded by combining dehydrogenation and decarboxylation techniques. Finally, this review enlists the opportunities and challenges of existing alcohols production and recommended the possible routes for making significant enhancement in production.

Optimization of the reproduction of Weissella cibaria in a fermentation substrate formulated with agroindustrial waste

•

Use of pineapple and sacha inchi wastes in biotechnological processes.

•

Valorization of agroindustrial waste in the context of circular economy.

•

Use of alternative fermentation substrates (SFS) in the production of probiotics (Weissella cibaria), in order to substitute conventional substrates.

•

Optimal conditions of the fermentation process for the reproduction and viability of W. cibaria.

Agroindustrial wastes contain macronutrients and micronutrients essential for the reproduction of lactic acid bacteria. In this research, the reproduction of Weissella cibaria was experimentally optimized in a supplemented fermentation substrate (SFS) formulated from pineapple and sacha inchi wastes. Response surface methodology was used to evaluate the influence of the following independent variables: temperature (32–40 °C), pH (5.0–6.0), and stirring speed (SS) (100–150 rpm) on the following dependent variables: viability (Log₁₀ CFU mL⁻¹), biomass production (B_Wc), lactic acid production (LA), biomass yield (Y_Bwc/S), biomass volumetric productivity (VP_Wc), LA volumetric productivity (VP_LA), carbon source consumption (CSC), N₂ consumption (N₂C), and specific growth rate (µ). The experimental optimization of multiple responses presented a desirability of 76.8%, thus defining the independent variables of the process: temperature = 35.1 °C, pH = 5.0, and SS = 139.3 rpm; and the dependent variables: viability = 10.01 Log₁₀ CFU mL⁻¹, B_Wc = 2.9 g L⁻¹, LA = 19.4 g mL⁻¹, Y_Bwc/S = 43.9 g biomass/g CSC, VP_Wc = 0.49 g L⁻¹h ^− 1, VP_LA = 3.2 g L⁻¹ h⁻¹, CSC = 17.2%, N₂C = 63.6% and µ = 0.28 h⁻¹. From these, viability, Y_Bwc/S, CSC, N₂C, and LA presented significant statistical differences, while the independent variable with the least important effect on the process was pH. Under optimal conditions of temperature, pH and SS; SFS favors the reproduction and viability of W. cibaria. This provides evidence of a sustainable alternative for the production of probiotics in the context of circular economy.

Pineapple (Ananas comosus L.) By-Products Valorization: Novel Bio Ingredients for Functional Foods

Pineapple is consumed on a large scale around the world due to its appreciated sensorial characteristics. The industry of minimally processed pineapple produces enormous quantities of by-products (30–50%) which are generally undervalued. The end-of-life of pineapple by-products (PBP) can be replaced by reuse and renewal flows in an integrated process to promote economic growth by reducing consumption of natural resources and diminishing food waste. In our study, pineapple shell (PS) and pineapple core (PC), vacuum-packed separately, were subjected to moderate hydrostatic pressure (225 MPa, 8.5 min) (MHP) as abiotic stress to increase bromelain activity and antioxidant capacity. Pressurized and raw PBP were lyophilized to produce a stable powder. The dehydrated samples were characterized by the following methodologies: chemical and physical characterization, total phenolic compounds (TPC), antioxidant capacity, bromelain activity, microbiology, and mycotoxins. Results demonstrated that PBP are naturally rich in carbohydrates (66–88%), insoluble (16–28%) and soluble (2–4%) fiber, and minerals (4–5%). MHP was demonstrated to be beneficial in improving TPC (2–4%), antioxidant activity (2–6%), and bromelain activity (6–32%) without affecting the nutritional value. Furthermore, microbial and mycotoxical analysis demonstrated that powdered PC is a safe by-product. PS application is possible but requires previous decontamination to reduce the microbiological load.

Towards continuous industrial bioprocessing with solventogenic and acetogenic clostridia: challenges, progress and perspectives

The sustainable production of solvents from above ground carbon is highly desired. Several clostridia naturally produce solvents and use a variety of renewable and waste-derived substrates such as lignocellulosic biomass and gas mixtures containing H2/CO2 or CO. To enable economically viable production of solvents and biofuels such as ethanol and butanol, the high productivity of continuous bioprocesses is needed. While the first industrial-scale gas fermentation facility operates continuously, the acetone-butanol-ethanol (ABE) fermentation is traditionally operated in batch mode. This review highlights the benefits of continuous bioprocessing for solvent production and underlines the progress made towards its establishment. Based on metabolic capabilities of solvent producing clostridia, we discuss recent advances in systems-level understanding and genome engineering. On the process side, we focus on innovative fermentation methods and integrated product recovery to overcome the limitations of the classical one-stage chemostat and give an overview of the current industrial bioproduction of solvents.

Formulation of a fermentation substrate from pineapple and sacha inchi wastes to grow Weissella cibaria

Gold honey variety pineapple wastes and sacha inchi sub-products (SIS) were characterized in their elemental, physical, and chemical form in order to formulate a supplemented fermentation substrate (SFS) for the growth Weissella cibaria. The peels and fresh cores of the pineapple (FPP, FPC) were dried and ground (PPP, PPC) and then mixed (MCPP). The following procedures were then undertaken: a physicochemical characterization (moisture, a_w, pH, acidity, and soluble solids) of the SIS, FPP, FPC, PPP, and PPC; a proximal characterization of he FPP, FPC, SIS, and SFS; and an elemental analysis (C-N₂-H₂-O₂-S) of the MCPP, SIS, and W. cibaria, which allowed the stoichiometric equation to be defined and the SFS to be formulated. We then evaluated the effect that homogenization and heating to boiling point had on the concentration of reducing sugars in the SFS (g L^-1). Finally, W. cibaria´s kinetic fermentation parameters were evaluated in the SFS and in a commercial substrate (control). The results showed FPP and FPC yields of 26.02 ± 0.58 and 14.69 ± 1.13%, respectively; a higher total sugar content in FPC (7.21%) than in FPP (6.65%); a high crude protein content in SIS (56.70%), and a C:N₂ ratio of 6.50:1.00. Moreover, the highest concentration of reducing sugars (4.44 ± 0.29 g L^-1) in the SFS was obtained with 5 h of hydrolysis under homogenization pre-treatments and heating until boiling. The SFS allowed the adaptation of W. cibaria, and there was a biomass production of 2.93 g L^-1 and a viability of 9.88 log CFU mL^-1. The formulation of an unconventional fermentation substrate from -Agro-industrial wastes of pineapple and sacha inchi to produce valuable products (such as lactic acid biomass through fermentation), is an excellent perspective for large-scale application.

Treatment of urban municipal landfill leachate utilizing garbage enzyme

In the present study, an attempt has been made to extend the application of garbage enzyme (GE) (fermented mixture of jaggery, organic waste, and water in the ratio 1:3:10) from the domestic wastewater to the urban municipal landfill leachate of Ghazipur, Okhla and Bhalswa landfill sites of Delhi (India). The Leachate Pollution Index (LPI) has been found to be 27.6, 25.4 and 29.2, respectively. The competence of GE was assessed by comparing the initial and final LPIs. The GE was added to the leachate for the contact period of 7-28 days under different mix proportions of 5%, 10%, 15%, and 20%. The maximum final LPI reduction of 74.75% was observed in the Okhla landfill leachate for mixing the proportion of 20% GE after 28 days. However, the mixing ratio of 5% GE showed significant reduction of 60.61% and 55.12% in the final LPI of Ghazipur and Bhalswa landfill leachate, respectively.

A review on characteristics of food waste and their use in butanol production

Biobutanol offers several advantages and a larger market, that make it a biofuel to be studied with great interest. In fact, butanol has an energy content similar to that of gasoline, and it can be used as an alternative fuel to gasoline. It is a biofuel that is safe for the environment. The optimization of the production of butanol thus appears as an attractive option. Butanol production from food waste (FW) is a process for carbon recovery and a method for solid waste recycling. Recently, the use of FW and food processing waste (FPW) as raw material for the production of butanol has attracted much interest. However, an efficient fermentation process is vital to improve the production of biobutanol. To the best of our knowledge, no review on butanol production from FW has been presented so far. Thus, this review focuses on the characteristics of FW and its potential to produce butanol. In addition, the main factors that affect their use for the production of butanol are also discussed.

Strategic intensification in butanol production by exogenous amino acid supplementation: Fermentation kinetics and thermodynamic studies

Amino acids are vital precursors in many biochemical production pathways in addition to efficient nitrogen source which could enhance microbial growth yields. Therefore, in present study, the effect of amino acids from aliphatic and aromatic family was comprehensively evaluated in batch and integrated fed batch fermentation system. Clostridium acetobutylicum NRRL B-527 was able to utilize 54.15 ± 1.0 g/L glucose to produce 12.43 ± 0.10 g/L butanol under batch cultivation. Interestingly, a significant step up in butanol titer (20.82 ± 0.33 g/L) was achieved by using fed-batch fermentation process integrated with liquid-liquid extraction module. Besides, mathematical modeling studies demonstrated the best fitting of experimental data with first order reaction kinetics. Overall, an enhancement in solvent titer by induction of essential cellular components coupled with advance bioprocess strategy was successfully utilized in this study for its further applications.

Production of butanol from biomass: recent advances and future prospects

At present, diminishing oil resources and increasing environmental concerns have led to a shift toward the production of alternative biofuels. In the last few decades, butanol, as liquid biofuel, has received considerable research attention due to its advantages over ethanol. Several studies have focused on the production of butanol through the fermentation from raw renewable biomass, such as lignocellulosic materials. However, the low concentration and productivity of butanol production and the price of raw materials are limitations for butanol fermentation. Moreover, these limitations are the main causes of industrial decline in butanol production. This study reviews butanol fermentation, including the metabolism and characteristics of acetone-butanol-ethanol (ABE) producing clostridia. Furthermore, types of butanol production from biomass feedstock are detailed in this study. Specifically, this study introduces the recent progress on the efficient butanol production of "designed" and modified biomass. Additionally, the recent advances in the butanol fermentation process, such as multistage continuous fermentation, metabolic flow change of the electron carrier supplement, continuous fermentation with immobilization and recycling of cell, and the recent technical separation of the products from the fermentation broth, are described in this study.

Role of Trace Elements as Cofactor: An Efficient Strategy toward Enhanced Biobutanol Production

Metabolic engineering has the potential to steadily enhance product titers by inducing changes in metabolism. Especially, availability of cofactors plays a crucial role in improving efficacy of product conversion. Hence, the effect of certain trace elements was studied individually or in combinations, to enhance butanol flux during its biological production. Interestingly, nickel chloride (100 mg L^-1) and sodium selenite (1 mg L^-1) showed a nearly 2-fold increase in solvent titer, achieving 16.13 ± 0.24 and 12.88 ± 0.36 g L^-1 total solvents with yields of 0.30 and 0.33 g g^-1, respectively. Subsequently, the addition time (screened entities) was optimized (8 h) to further increase solvent production up to 18.17 ± 0.19 and 15.5 ± 0.13 g L^-1 by using nickel and selenite, respectively. A significant upsurge in butanol dehydrogenase (BDH) levels was observed, which reflected in improved solvent productions. Additionally, a three-dimensional structure of BDH was also constructed using homology modeling and subsequently docked with substrate, cofactor, and metal ion to investigate proper orientation and molecular interactions.

Recent trends in biobutanol production

Finite availability of conventional fossil carbonaceous fuels coupled with increasing pollution due to their overexploitation has necessitated the quest for renewable fuels. Consequently, biomass-derived fuels are gaining importance due to their economic viability and environment-friendly nature. Among various liquid biofuels, biobutanol is being considered as a suitable and sustainable alternative to gasoline. This paper reviews the present state of the preprocessing of the feedstock, biobutanol production through fermentation and separation processes. Low butanol yield and its toxicity are the major bottlenecks. The use of metabolic engineering and integrated fermentation and product recovery techniques has the potential to overcome these challenges. The application of different nanocatalysts to overcome the existing challenges in the biobutanol field is gaining much interest. For the sustainable production of biobutanol, algae, a third-generation feedstock has also been evaluated.