A versatile bio-based material for efficiently removing toxic dyes, heavy metal ions and emulsified oil droplets from water simultaneously

Investigation on novel chitin and chitosan from dung beetle Heteronitis castelnaui (Harold, 1865) and its potential application for organic dyes removal from aqueous solution

Chitosan, a natural polysaccharide, has attracted considerable attention as an environmentally friendly and highly efficient adsorbent for dye removal. It is usually produced by deacetylation or partial deacetylation of chitin. However, conventional sources of chitin and chitosan are limited, prompting the need for alternative sources with improved adsorption capabilities. Herein, this study focuses on exploring a novel chitin and chitosan source derived from the dung beetle and evaluates its potential for organic dye removal from aqueous solutions. The research involves the extraction and characterization of chitin and chitosan from dung beetle Heteronitis castelnaui (Harold, 1865) using various analytical techniques, including SEM, FT-IR, TGA, XRD, NMR, deacetylation degree and elemental analysis. The chitosan obtained was used for the formation of hydrogels with sodium alginate via cross-linking with calcium chloride. And then the prepared hydrogels were evaluated for its adsorption capacity through batch adsorption experiments using methylene blue as a model pollutant. The adsorption capacity for methylene blue was 1294.3 mg/g at room temperature with solution pH = 12, MB concentration of 1800 mg/L. Furthermore, the kinetics of the adsorption process were analyzed using pseudo-first-order and pseudo-second-order models to understand the rate of adsorption. The maximum adsorption capacities were determined using Langmuir and Freundlich isotherm models. This study provides valuable insights for the development of sustainable dye adsorption technologies, specifically investigating a novel chitosan source derived from the dung beetle.

Synthesis, Characterization, and Evaluation of the Adsorption Behavior of Cellulose-Graft-Poly(Acrylonitrile-co-Acrylic Acid) and Cellulose-Graft-Poly(Acrylonitrile-co-Styrene) towards Ni(II) and Cu(II) Heavy Metals

In this study, the synthesis and characterization of grafted cellulose fiber with binary monomers mixture obtained using a KMnO4/citric acid redox initiator were investigated. Acrylonitrile (AN) was graft copolymerized with acrylic acid (AA) and styrene (Sty) at different monomer ratios with evaluating percent graft yield (GY%). Cell-g-P(AN-co-AA) and Cell-g-P(AN-co-Sty) were characterized by SEM, FT-IR, 13C CP MAS NMR, TGA, and XRD. An AN monomer was used as principle-acceptor monomer, and GY% increases with AN ratio up to 60% of total monomers mixture volume. The adsorption behaviors of Cell-g-P(AN-co-AA) and Cell-g-P(AN-co-Sty) were studied for the adsorption of Ni(II) and Cu(II) metal ions from aqueous solution. Optimal adsorption conditions were determined, including 8 h contact time, temperature of 30 °C, and pH 5.5. Cell-g-P(AN-co-AA) showed maximum adsorption capacity of 435.07 mg/g and 375.48 mg/g for Ni(II) and Cu(II), respectively, whereas Cell-g-P(AN-co-Sty) showed a maximum adsorption capacity of 379.2 mg/g and 349.68 mg/g for Ni(II) and Cu(II), respectively. Additionally, adsorption equilibrium isotherms were studied, and the results were consistent with the Langmuir model. The Langmuir model's high determinant coefficient (R2) predicted monolayer sorption of metal ions. Consequently, Cell-g-P(AN-co-AA) and Cell-g-P(AN-co-Sty) prepared by a KMnO4/citric acid initiator were found to be efficient adsorbents for heavy metals from wastewater as an affordable and adequate alternative.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Ultrafast absorption mechanism of oil-emulsified micelles onto ferrous absorbents with dielectrophoresis force in the presence of polarization

Absorption and desorption rates were generally dependent on the concentration gradient from bulk to absorbents. A novel methodology based on a capacitor with an alternating electric field (AEF) is developed to accelerate the absorption and desorption rates with the frequency manipulation. Ferrous polystyrene microspheres (PISMs) are synthesized as absorbents, which could enhance the complex permittivities as well as dielectric properties. Theoretically, the attractive force and viscous force predominately determine the particle and micelles movement in the medium under an AEF. Oil-emulsified micelles (OEM) with various viscosities were selected as absorbates. Both the OEM and microspherical absorbents assembled through the external attractive force in the presence of the AEF. When the attractive force is equal to viscous force in the medium at the characteristic frequency, the optimal absorption rate could be obtained. The absorption rate constants of pseudo-first-order for OEMs under the polarization at 50 V and 120 kHz of frequency are ca. 10 times higher than that in absence of the polarization. The desorption rate as well as recycling efficiency could be also improved at 800 kHz. The ferrous PISMs with high complex permittivity prevented the damage from the AEF, which could be recycled 10 times of absorption and desorption with frequency manipulation under the AEF. Our methodology provides novel insights for ultrafast wastewater treatment.

Recent progress on plant extract-mediated biosynthesis of ZnO-based nanocatalysts for environmental remediation: Challenges and future outlooks

The plant extract mediated green synthesis of nanomaterials has attracts enormous interest due to its cost-effectiveness, greener, and environmentally friendly. It is also considered as an alternative and facile method in which the phytochemicals can be used as a natural capping and reducing agents and helped to produce nanomaterials with high surface area, different sizes, and shapes. One of the materials fabricated using green methods is zinc oxide (ZnO) semiconductor due to its enormous applications in different field areas. In this review, an overview of recent progress on green synthesized ZnO-based catalysts and various modification methods for the purpose of enhancing the catalytic activity of ZnO and the corresponding structural-activity and interactions towards the removal of pollutants are highlighted. Particularly, the plant extract mediated ZnO-based photocatalysts application for the removal of pollutants via photocatalytic degradation, reduction reaction, and adsorption mechanism are demonstrated. Besides, the opportunities, challenges, and future outlooks of ZnO-based materials for environmental remediation with green and sustainable methods are also included. We believe that this review is a timely and comprehensive review on the recent progress related to plant extract mediated ZnO-based nanocatalysts synthesis and applications for environmental remediation.

Chemically cross-linked keratin and nanochitosan based sorbents for heavy metals remediation

Biosorbents for water remediation were prepared using keratin biopolymer cross-linked with nanochitosan (NC). Keratin proteins were dissolved using reducing agents and NC was incorporated with concentrations of 1, 3 and 5 % individually into the keratin solution. The mixtures were thermally treated at 75°C overnight, which promoted the formation of ester bonds between the hydroxyl groups of nanochitosan and the carboxylic groups of the keratin biopolymer. The resulting keratin derived biosorbents were characterized by X-Ray photoelectron spectroscopy, confirming the cross-linking between keratin and nanochitosan. The chicken feathers keratin (CFK) surface modifications with nanochitosan were examined with Brunauer-Emmett-Teller, scanning and transmission electron microscopies. The sorption capacity of biosorbents was tested for eight different metals simultaneously at different contact times (15, 30, 60, 120, 240, 280 mins) and pH (5.5, 7.5 and 8.5), including arsenic, selenium, chromium, nickel, cobalt, lead, cadmium and zinc, using simulated industrial wastewater water containing 600 μg L^-1 concentration of each metal. The synthesized environmentally benign biosorbents exhibited biosorption of metals upto 98 % at pH 7.5 and a contact time of 24 h, showing their potential for industrial wastewater remediation.

Structure and Adsorption Performance of Cationic Entermorpha prolifera Polysaccharide-Based Hydrogel for Typical Pollutants: Methylene Blue, Cefuroxime, and Cr (VI)

Hydrogels with polysaccharides as high polymer substrates have surprising advantages in wastewater treatment with complex components. Therefore, in this study, polysaccharides named EPS were extracted from Enteromorpha prolifera, a coastal pollutant with a wide range of sources, and cationic modification was performed to obtain CAEPS, the hydrogel with a double network structure was prepared based on EPS and CAEPS. Meanwhile, the structural characteristic of EPS and CAEPS-based hydrogel were identified by HPLC, AFM, FT-IR, TGA, SEM-EDS, Pore size distribution, and WCA, which showed that the porosity, apparent (skeletal) density, and hydrophilicity of CAEPS-hydrogels. We used nonlinear isotherms to uncover the adsorption mechanism of hydrogel applied to the water environment containing three typical pollutants (Methylene blue, Cefuroxime, and Cr (VI)). The results showed that the adsorption isotherm of the two hydrogels fit the Langmuir isotherm model, which indicated the monolayer adsorption of the pollution factor onto EPS- and CAEPS-hydrogels. The maximum adsorption capacities of CAEPS-hydrogels were higher than EPS-hydrogels, which indicated the microstructure and adsorption performance of the CAEPS-hydrogel are strengthened.

Synthesis of Superhydrophobic Cellulose Stearoyl Ester for Oil/Water Separation

Developing fluorine-free superhydrophobic and biodegradable materials for oil/water separation has already become an irresistible trend. In this paper, we designed two biopolymer oil/water separation routes based on cellulose stearoyl ester (CSE), which was obtained via the acylation reaction between dissolving pulp and stearoyl chloride homogeneously. The CSE showed a superhydrophobic property, which could selectively adsorb oil from the oil/water mixture. Additionally, the CSE was emulsified with an oxidized starch (OS) solution, and the resulting latex was used to impregnate commercial, filter base paper, finally obtaining a hydrophobic and oleophilic membrane. The SEM revealed the membrane had hierarchical micro/nanostructures, while the water contact angle indicated the low surface energy of the membrane, all of which were attributed to the CSE. The membrane had high strength and long durability due to the addition of OS/CSE, and the separation efficiency was more than 99% even after ten repeated uses.

Bio-Based and Robust Polydopamine Coated Nanocellulose/Amyloid Composite Aerogel for Fast and Wide-Spectrum Water Purification

Water contamination resulting from human activities leads to the deterioration of aquatic ecosystems. This restrains the access to fresh water, which is the leading cause of mortality worldwide. In this work, we developed a bio-based and water-resistant composite aerogel from renewable nanofibrils for water remediation application. The composite aerogel consists of two types of cross-linked nanofibrils. Poly(dopamine)-coated cellulose nanofibrils and amyloid protein nanofibrils are forming a double networked crosslinked via periodate oxidation. The resulting aerogel exhibits good mechanical strength and high pollutants adsorption capability. Removal of dyes (rhodamine blue, acriflavine, crystal violet, malachite green, acid fuchsin and methyl orange), organic traces (atrazine, bisphenol A, and ibuprofen) and heavy metal ions (Pb(II) and Cu(II)) from water was successfully demonstrated with the composite aerogel. More specifically, the bio-based aerogel demonstrated good adsorption efficiencies for crystal violet (93.1% in 30 min), bisphenol A (91.7% in 5 min) and Pb(II) ions (94.7% in 5 min), respectively. Furthermore, the adsorption-desorption performance of aerogel for Pb(II) ions demonstrates that the aerogel has a high reusability as maintains satisfactory removal performances. The results suggest that this type of robust and bio-based composite aerogel is a promising adsorbent to decontaminate water from a wide range of pollutants in a sustainable and efficient way.

Multifunctional starch-based material for contaminated emulsions separation and purification

Stable water-in-oil (W/O) emulsions can produce at many industrial production occasions. However, most materials for its separation have serious fouling problems. To overcome this shortcoming, we fabricated an easy cleaning multifunctional starch-based material with unique wetting behavior which could realize efficient separation and purification of W/O emulsions. This material has a hierarchical structure and superoleophilic and under oil superhydrophobic surfaces which could separate various W/O emulsions in a high separation efficiency and flux without external pressure. In addition, the decrease of separation flux was not observed for this material, which can be reused more than 10 times after washing with ethanol and drying after each separation cycle. Furthermore, this material also could realize efficient removal of dyes and heavy-metal and rare-earth ions simultaneously during a separation process. The material shows great potential for separating and purifying stable W/O emulsions produced during the industrial production.

Mussel-inspired superhydrophilic membrane constructed on a hydrophilic polymer network for highly efficient oil/water separation

HYPOTHESIS

Superhydrophilic/underwater superoleophobic membrane constructed by hydrophilic polymers possesses great advantage in the separation of oily waste water, due to its intrinsic oil-repellent property. The formation of hydration layer to repel and block oil is considered as the mechanism of underwater superoleophobicity and subsequent oil/water separation. Constructing a stable hydrophilic polymer network on the substrate surface would significantly improve the robustness of hydration layer.

EXPERIMENTS

In this work, a feasible and universal mussel-inspired dip-coating method was developed for constructing stable hydrophilic polymer network onto target substrate surface, via successively immersing substrate membranes into aqueous solutions of polydopamine (PDA) and catechol-functionalized hydrophilic polymer (CFHP). After pre-wetting with water, the polymer network would swell with water to form a thin and stable water film layer, serving as a barrier against oil penetration.

FINDINGS

The as-prepared CFHP/PDA modified membranes exhibit outstanding performance in separating various oil/water mixtures and oil-in-water emulsions stabilized by surfactants, with separation flux up to 5641.1 L·m^-2·h^-1 and separation efficiency achieving 99.98%. The surface modification method developed in this work can be easily extended to various materials and membrane systems, for achieving a variety of practical applications such as industrial wastewater treatment.

Enhancement of wastewater treatment by underwater superelastic fiber-penetrated lamellar monolith

During the removal of pollutants from wastewater, the underwater compressibility of three-dimensional biomass materials is the main factor determining their properties and service life. To construct a chitosan (CS)-based material with underwater superelasticity, a bidirectional freezing technique was used to introduce bamboo fibers (BFs) as bridges between CS lamellae to form a biomimetic CS/BFs monolith with an architecture similar to Thalia dealbata stems. BFs completely penetrated CS lamellae from the top down, which served as springs to dampen the elastic deformation during compressive cycles. After 10,000 underwater compressive cycles at 60% strain, the plastic deformation was negligible, and after 100 cycles at 90% strain, the monolith retained 93.8% of the maximum stress. Moreover, the CS/BFs monolith was loaded with CaCO₃ nanoparticles via compression-release-compression to obtain a CS/BFs/CaCO₃ monolith that exhibited excellent water purification capabilities. The CS/BFs/CaCO₃ monolith removed water-soluble dyes, heavy-metal ions, and emulsified oils from water with a high separation efficiency by simple squeezing and pumping methods. The novel pumping technology using the CS/BFs/CaCO₃ monolith provides a facile and rapid method to separate oil-in-water emulsions (maximum water flux of 11,776.9 L m^-2 h^-1). Therefore, the CS/BFs/CaCO₃ monolith with underwater superelasticity has great potential applications for wastewater treatment.

Recent Achievements in Polymer Bio-Based Flocculants for Water Treatment

Polymer flocculants are used to promote solid-liquid separation processes in potable water and wastewater treatment. Recently, bio-based flocculants have received a lot of attention due to their superior advantages over conventional synthetic polymers or inorganic agents. Among natural polymers, polysaccharides show many benefits such as biodegradability, non-toxicity, ability to undergo different chemical modifications, and wide accessibility from renewable sources. The following article provides an overview of bio-based flocculants and their potential application in water treatment, which may be an indication to look for safer alternatives compared to synthetic polymers. Based on the recent literature, a new approach in searching for biopolymer flocculants sources, flocculation mechanisms, test methods, and factors affecting this process are presented. Particular attention is paid to flocculants based on starch, cellulose, chitosan, and their derivatives because they are low-cost and ecological materials, accepted in industrial practice. New trends in water treatment technology, including biosynthetic polymers, nanobioflocculants, and stimulant-responsive flocculants are also considered.

Efficient co-removal of copper and tetracycline from aqueous solution by using permanent magnetic cation exchange resin

This work aimed to examine a permanent magnetic cation-exchange resin (MCER) for synergistic co-removal of Cu(II) and tetracycline (TC) from their mixed solutions. Batch adsorption experiments and characterizations were performed to elucidate the adsorption mechanisms. The adsorption of Cu(II) followed the Langmuir isotherm model in most cases, while Freundlich isotherm model was more suitable for fitting TC adsorption, which was due to the surface coordination between adsorbed Cu(II) and TC and the formation of multilayer MCER-Cu-TC complexes. The equilibrium TC adsorption amount in binary Cu/TC system was about 5.5-13.5 times of that in sole system, whereas Cu(II) uptake was nearly unchanged. Decomplexing-bridging was ascribed as the primary mechanism, which involved the [Cu-TC] decomplexing and [resin-Cu] bridging for TC uptake. Moreover, these MCER microbeads could be reused with negligible loss in adsorption capacity during five adsorption-desorption cycles, indicative of great potential in synergistic co-removal of organics-Cu complexes from aqueous solutions.

Highly efficient dye decontamination via microbial salecan polysaccharide-based gels

Wastewater treatment materials that combine high decontamination performance, ease of use and economic production are highly desirable for practical applications. Herein, we fabricated a low-cost and recyclable bio-adsorbent based on a microbial polysaccharide (salecan) for efficient removal of methyl violet (MV) from wastewater. The success fabrication and the properties (such as thermal stability, microarchitecture, mechanical strength and water uptake) of the adsorbent had been investigated, and the hydrogels were found to have tunable properties by simple adjusting the salecan dose in hydrogel composition. Adsorption data displayed that the adsorption of MV followed the pseudo second-order kinetic model (R² = 0.99015) and Freundlich isotherm model (R² = 0.99221) with a maximum adsorption capacity of 178.9 mg/g. Moreover, salecan-based hydrogels showed a good reversibility in adsorption-desorption cycles. These features indicate that salecan-based bio-adsorbent may be a promising device for dye removal from dyeing waste water.

One-step synthesis of versatile magnetic nanoparticles for efficiently removing emulsified oil droplets and cationic and anionic heavy metal ions from the aqueous environment

Versatile polyethyleneimine (PEI)-coated Fe₃O₄ magnetic nanoparticles (MNPs) have been synthesized by a one-step solvothermal method. The morphologies, structures, and properties of MNPs prepared for different reaction times have been characterized through various techniques. The synthesized MNPs were then used to separate emulsified oil and cationic and anionic heavy metal ions from the aqueous environment; moreover, the effects of the temperature, pH, and ionic strength of aqueous media, the solvothermal reaction time, and the number of reuse cycles on the removal efficiency have been investigated in detail. The results showed that pseudo-second-order kinetics and the Langmuir isotherm well described the adsorption processes of Cu(II) and Cr(VI). The Langmuir model yielded maximum adsorption capacities of 66.6 mg g^-1 for Cu(II) and 54.5 mg g^-1 for Cr(VI) at pH 5.0 and 25 °C. The synthetic MNPs could also efficiently separate diesel oil or olive oil droplets stabilized by sodium dodecyl sulfate from aqueous media. Moreover, these MNPs could be recycled five times without showing significant loss in separation efficiency. Notably, the synthesized PEI-coated MNPs could simultaneously separate emulsified oil and cationic and anionic heavy metal ions from multicomponent wastewater. Such versatile PEI-coated MNPs displayed good affinity towards emulsified oil and cationic and anionic heavy metal ions, showing great potential for practical applications in the treatment of complicated industrial wastewater matrices. Graphical abstract Simultaneous separation of emulsified oil and cationic and anionic heavy metal ions from aqueous media by using polyethyleneimine-coated Fe₃O₄ magnetic nanoparticles.

Functional Porous Carboxymethyl Cellulose/Cellulose Acetate Composite Microspheres: Preparation, Characterization, and Application in the Effective Removal of HCN from Cigarette Smoke

To selectively reduce the yield of hydrogen cyanide (HCN) in the cigarette smoke, functional porous carboxymethyl cellulose/cellulose acetate (CMC/CA) composite microspheres were prepared via the double emulsion-solvent evaporation method. Cupric ions, which have a high complexing ability toward HCN, were introduced to the CMC/CA composite microspheres during the fabrication process via an in situ ion cross-link method. The microspheres were characterized using nitrogen adsorption, mercury intrusion porosimetry, and scanning electron microscopy (SEM). The microspheres have a predominantly macroporous structure indicating weak physisorption properties, but sufficient functional cupric ion groups to selectively adsorb HCN. With these CMC/CA microspheres as filter additives, the smoke yield of HCN could be reduced up to 50%, indicating the great potential of these microspheres as absorbents for removing HCN from cigarette smoke.

Fabrication and Highly Efficient Dye Removal Characterization of Beta-Cyclodextrin-Based Composite Polymer Fibers by Electrospinning

Dye wastewater is one of the most important problems to be faced and solved in wastewater treatment. However, the treatment cannot be single and simple adsorption due to the complexity of dye species. In this work, we prepared novel composite fiber adsorbent materials consisting of ε-polycaprolactone (PCL) and beta-cyclodextrin-based polymer (PCD) by electrospinning. The morphological and spectral characterization demonstrated the successful preparation of a series of composite fibers with different mass ratios. The obtained fiber materials have demonstrated remarkable selective adsorption for MB and 4-aminoazobenzene solutions. The addition of a PCD component in composite fibers enhanced the mechanical strength of membranes and changed the adsorption uptake due to the cavity molecular structure via host⁻guest interaction. The dye removal efficiency could reach 24.1 mg/g towards 4-aminoazobenzene. Due to the admirable stability and selectivity adsorption process, the present prepared beta-cyclodextrin-based composite fibers have demonstrated potential large-scale applications in dye uptake and wastewater treatment.

Stimuli-responsive bio-based polymeric systems and their applications

This article highlights the properties of stimuli-responsive bio-based polymeric systems and their main intelligent applications.

Functionalization of biodegradable PLA nonwoven fabrics as super-wetting membranes for simultaneous efficient dye and oil/water separation

Although the construction process of dual functional materials for dye and oil/water separation has been developed rapidly, the postprocess of the used separation materials themselves is still a problem owing to their non-degradation in the natural environment.

Novel Polymer Material for Efficiently Removing Methylene Blue, Cu(II) and Emulsified Oil Droplets from Water Simultaneously

The pollution of water resources has become a worldwide concern. The primary pollutants including insoluble oil, toxic dyes, and heavy metal ions. Herein, we report a polymer adsorbent, named SPCT, to remove the above three contaminants from water simultaneously. The preparation process of SPCT contains two steps. Firstly, a hydrogel composed of sulfonated phenolic resin (SMP) and polyethyleneimine (PEI) was synthesized using glutaraldehyde (GA) as the crosslinking agent, and the product was named SPG. Then SPCT was prepared by the reaction between SPG and citric acid (CA) at 170 °C. SPCT exhibited an excellent performance for the removal of methylene blue (MB) and Cu(II) from aqueous solution. For a solution with a pollutant concentration of 50 mg L⁻¹, a removal efficiency of above 90% could be obtained with a SPCT dosage of 0.2 g L⁻¹ for MB, or a SPCT dosage of 0.5 g L⁻¹ for Cu(II), respectively. SPCT also presented an interesting wettability. In air, it was both superhydrophilic and superoleophilic, and it was superoleophobic underwater. Therefore, SPCT could successfully separate oil-in-water emulsion with high separation efficiency and resistance to oil fouling. Additionally, SPCT was easily regenerated by using dilute HCl solution as an eluent. The outstanding performance of SPCT and the efficient, cost-effective preparation process highlight its potential for practical applications.

Fabrication of eco-friendly nanofibrous membranes functionalized with carboxymethyl-β-cyclodextrin for efficient removal of methylene blue with good recyclability

Considering the excellent thermo-mechanical properties, chemical stability and low cost of biodegradable aliphatic-aromatic copolyesters, they are an ideal matrix when functionalized for capturing pollutants in wastewater. In this work, biodegradable poly((butylene succinate-co-terephthalate)-co-serinol terephthalate) (PBSST) copolyesters with amino side group (-NH₂) were first synthesized through copolymerization, followed by grafting carboxymethyl-β-cyclodextrin (CM-β-CD) into PBSST molecular chains via amidation reaction to prepare PBSST-g-β-CD. The corresponding nanofibrous membranes were then fabricated by electrospinning as adsorbents for efficiently removing cationic dye methyl blue (MB) from aqueous solutions. The adsorption performance of the nanofibrous membranes was fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption capacity was 543.48 mg g^-1 for MB along with a removal efficiency of 98% after five regeneration cycles, indicating the high adsorption capacity and good recyclability of nanofibrous membranes. The adsorbents possess features of high adsorption capacity, eco-friendliness and easy operation, and exhibit great potential for disposing of printing-dying wastewater.

Calcined Mussel Shell Powder (CMSP) via Modification with Surfactants: Application for Antistatic Oil-Removal

Biomass is known to efficiently adsorb pollutants from wastewater. In this paper, we demonstrated that a new antistatic oil-cleaning material can be prepared and assembled by using two surfactants, alkyl polyglucosides (APG) and dimethyl octadecyl hydroxy ethyl ammonium nitrate (SN), to modify calcined mussel shell powder (CMSP) through a two-step hydrotherm-assisted adsorption. The pore size and structure of CMSP was measured by BET and a contact angle meter was used to characterize the surface wetting ability. XRD, FTIR, XPS, SEM, TEM, and HRTEM were employed to determine the surface structure of CMSP modified by surfactants APG and SN (MMO). In order to further characterize properties of the surface morphology and crystal structure, the HRTEM was employed to show that the MMO surface had a single crystal structure: calcite, with a crystal plane spacing of 0.2467 nm. The surface of MMO appeared to be fluffy and disperse. The antistatic and degreasing ability of as-prepared samples (MMO) was evaluated by a ZC-36 high resistance meter and BD-457 whiteness meter. The results showed that when the calcination temperature of CMSP reached 1000 °C, and the addition amount of APG and SN was 0.8 g and 0.16 g, it had an optimum antistatic effect with a surface resistivity (Rs) of 1.35 × 10⁸ Ω, and a detergency rate to oil of 17.35%. This study aims to embrace a green solution to reduce environmental pressure and make use of waste, which is of great significance to environmental protection.