Organic micropollutants removal in sequential batch reactor followed by nanofiltration from municipal wastewater treatment

An Overview of Degradation Strategies for Amitriptyline

Antidepressant drugs play a crucial role in the treatment of mental health disorders, but their efficacy and safety can be compromised by drug degradation. Recent reports point to several drugs found in concentrations ranging from the limit of detection (LOD) to hundreds of ng/L in wastewater plants around the globe; hence, antidepressants can be considered emerging pollutants with potential consequences for human health and wellbeing. Understanding and implementing effective degradation strategies are essential not only to ensure the stability and potency of these medications but also for their safe disposal in line with current environment remediation goals. This review provides an overview of degradation pathways for amitriptyline, a typical tricyclic antidepressant drug, by exploring chemical routes such as oxidation, hydrolysis, and photodegradation. Connex issues such as stability-enhancing approaches through formulation and packaging considerations, regulatory guidelines, and quality control measures are also briefly noted. Specific case studies of amitriptyline degradation pathways forecast the future perspectives and challenges in this field, helping researchers and pharmaceutical manufacturers to provide guidelines for the most effective degradation pathways employed for minimal environmental impact.

Greywater treatment in SBR-SND reactor - optimization of hydraulic retention time, volumetric exchange ratio and sludge retention time

In this study, simultaneous nitrification and denitrification-sequencing batch reactor (SND-SBR) process was investigated to treat greywater. The effect of three process parameters, including hydraulic retention time (HRT), volumetric exchange ratio (VER) and sludge retention time (SRT), was optimised using a 23 full factorial design. The statistic model was developed for two response variables, i.e. chemical oxygen demand (COD) and ammonia (NH3-N) removal. The optimum conditions were 6.8 h HRT (anaerobic/aerobic/anoxic: 1.77 h/2.77 h/2.27 h), 0.7 VER and 7.94 d SRT, which resulted in 93.9% COD and 84.6% NH3-N removal efficiency. SRT was the most significant factor, followed by HRT and VER for COD and NH3-N removal. The interaction effect of VER and SRT was significant in COD removal. On the other hand, the interaction effects of HRT-VER and HRT-SRT were significant in NH3-N removal. The removal efficiencies of 89.6 ± 1.1% and 83.7 ± 2.3% were observed for TKN and TN, respectively, in the optimised SND-SBR system. NH3-N removal was obtained via nitrate pathway in the SND-SBR system. The PO43--P removal of 74.2 ± 3.4% was obtained via aerobic phosphorus uptake and post anoxic denitrification at the optimal condition. To enhance PO43--P removal, adsorption (using corn cob adsorbent) was integrated with SBR by adding the optimum adsorbent dose (0.5 g/L). The PO43--P removal efficiency in the SBR-adsorption system was found to be 80 ± 1.5%. The biodegradation of emerging contaminants (ECs) was also carried out in the SND-SBR system, and the results showed removal rate of 58.9 ± 2.3% benzophenone-3 (BP) and 80.1 ± 2.2% anionic surfactant (AS).

MCDA-DEA approach to construct a composite indicator for effluents from WWTPs considering the influence of PPCPs

Considering current water situation, reuse is an effective solution to meet water demand and reduce pressure on conventional water sources. However, pharmaceutical and personal care products (PPCPs) in effluents from wastewater treatment plants (WWTPs) decrease their quality and suitability. With the aim of identifying and monitoring both the influence of PPCPs and the suitability of effluents to be reused, this study proposes the development of a composite indicator (CI) related to PPCP presence in WWTPs, through the common weight multi-criteria decision analysis (MCDA)-data envelopment analysis (DEA) model. Obtaining a CI for PPCPs is a novel approach in the published literature, showing a new perspective in PPCP management and their influence in wastewater treatment. Furthermore, this study proposes an improvement on MCDA-DEA model which maintains the initial hierarchy obtained for the units analyzed. The development of CI is based on information about the technological, environmental, social, and biological issues of WWTPs. Results show that 4 of the 33 WWTPs analysed had the best CI values, meaning that their effluents have lower environmental impact. The development of a CI related to PPCPs in WWTPs suggests that further steps are needed to manage the WWTP effluents. Hence, the need to implement preventive measures in WWTPs has been shown, even though the removal of PPCPs is not yet part of European law. This work highlights the importance of considering PPCPs as priority pollutants in wastewater management and reuse frameworks, to guarantee low environmental impact and adapt wastewater reuse based on a circular economy approach. HIGHLIGHTS: Emerging contaminants (PPCPs) are used as effluent quality indicators. A composite indicator for PPCPs performance has been developed through MCDA-DEA model. Indicator obtained allow decision makers implementing concrete actions to assess effluent quality. Results show the improvement capacity of the effluents quality through PPCPs removing.

Sequential biological and solar photocatalytic treatment system for greywater treatment

In this study, sequencing batch reactor (SBR) using anaerobic/aerobic/anoxic process was coupled to a solar photocatalytic reactor (SPCR) for greywater treatment. The greywater effluent from SBR (operated at the optimal condition: 6.8 h hydraulic retention time (HRT), 0.7 Volumetric exchange ratio (VER) and 7.94 d solids retention time (SRT) with optimal corn cob adsorbent dosage (0.5 g/L)) was fed to the SPCR (operated at optimal conditions: pH - 3, H₂O₂ dosage - 1 g/L, catalyst dosage - 5 g/L). Chemical oxygen demand (COD) removal of 92.8±0.5% and ∼100% were achieved in SBR and SBR-SPCR, respectively. Similarly, total organic carbon (TOC) removal of 91±0.9% and ∼100% were observed in SBR and SBR-SPCR, respectively. After SBR treatment, average total nitrogen (TN) removal of 84% was found and this TN removal increased to 93% after combined SBR-SPCR treatment. The maximum PO₄^3-_P reduction of 80±1.5% % was achieved with SBR-adsorption system. In addition, a maximum of 87±0.9% of net PO₄^3-_P removal was reached after SBR-SPCR treatment. 58.9±2.3% BP (benzophenone-3) removal was obtained in the SBR while the integration of SBR and SPCR treatment was resulted in 100% BP removal. An effective anionic surfactant (AS) removal rate (80.1±2.2%) was observed in the SBR phase, which further improved to 94.9±1% at the end of 4 h SPCR treatment.

Investigating the biological degradation of the drug β-blocker atenolol from wastewater using the SBR

Drug compounds are one of the main contributors to the entry of micro-pollutants into the environment, known as a constant threat to environmental stability. Atenolol is a type of beta-blocker extensively used to cure cardiovascular disorders. The residues of this compound have been continuously detected in aquatic environments because it is a polar and poorly biodegradable compound. Thus, removing atenolol from wastewater is essential before discharging into the environment. Biological processes are considered the most important removal process for polar drugs in wastewater treatment plants. Accordingly, for the first time in this study, the SBR performance was investigated in the biodegradation and mineralization of atenolol under different concentrations (50-600 mg/L) and hydraulic retention times (48-32 h). Based on the results, the time required for the acclimation of biomass to atenolol (C: 50 mg/L and the HRT: 48 h) was 80 days. The SBR efficiencies under optimum conditions (C: 400 mg/L and HRT: 40 h) in removing the atenolol and COD were 91% and 87%, respectively. For the first time in this study, one of the main pathways of the atenolol biodegradation was identified. Based on the review and comparison of the results of this study with existing literature showing that the SBR used in this study was able to remove higher concentrations with better efficiencies than other processes. Therefore, it can be concluded that the SBR used in this study could be considered an efficient and promising technique for treating wastewaters containing atenolol and other beta-blocker group drugs.

Medicines as an emergent contaminant: the review of microbial biodegration potential

Emerging environmental contaminants, such as medicine waste, are of great concern to the scientific community and to the local environmental and health departments because of their potential long-term effects and ecotoxicological risk. Besides the prolonged use of medicines for the development of modern society, the elucidation of their effect on the ecosystem is relatively recent. Medicine waste and its metabolites can, for instance, cause alterations in microbial dynamics and disturb fish behavior. Bioremediation is an efficient and eco-friendly technology that appears as a suitable alternative to conventional methods of water waste and sludge treatment and has the capacity to remove or reduce the presence of emerging contaminants. Thus, this review has the objective of compiling information on environmental contamination by common medicines and their microbial biodegradation, focusing on five therapeutic classes: analgesics, antibiotics, antidepressants, non-steroidal anti-inflammatory drugs (NSAIDs), and contraceptives. Their effects in the environment will also be analyzed, as well as the possible routes of degradation by microorganisms.

Occurrence and removal of bisphenol analogues in wastewater treatment plants and activated sludge bioreactor

The occurrence and removal of ten bisphenol analogues (BPs) in municipal wastewater treatment plants (WWTPs) and laboratory scale activated sludge bioreactor (ASBR) were studied. All targeted BPs except for tetrachlorobisphenol A (TCBPA) were detected in the four WWTPs (W1, W2, W3 and W4) in the ng/L and ng/g dry weight range in wastewater and activated sludge, respectively, indicating that in addition to BPA, the BPA substitutes were widely used in our daily life and industrial production. Discrepant results regarding the removal efficiencies of BPs by different wastewater treatment processes were obtained. The removal rates were 55.6%, 24.4%, -10.1%, 71.4%, 38.9%, 58.0%, 39.1% and 6.4% in W1, 65.4%, 32.8%, 44.7, -13.5%, 20.1%, -29.6%, -25.1% and 99.4% in W2, 11.6%, 48.8%, 38.9%, 22.0%, 99.0%, -29.2%, -56.5% and 32.6% in W3, 33.9%, 30.5%, 17.4%, -47.6%, 62.9%, 83.0%, 4.4% and -4.3% in W4, for BPA, BPB, BPE, BPF, BPS, BPZ, BPAF and BPAP, respectively. The removal of ten targeted BPs in lab-scale continuous flow conventional ASBR and the key factors were investigated. The simulated laboratory-scale ASBR were highly effective in removing BPA, BPB, BPE, BPF, BPM and BPS with removal efficiencies of >94.3%, while BPZ, BPAP, BPAF and TCBPA were recalcitrant to elimination in the stimulated bioreactor with removal efficiencies of 71.3 ± 13.7%, 55.1 ± 21.2%, 47.4 ± 9.5% and 45.3 ± 16.6%, respectively. Protonation, hydrophobicity and molecular features of BPs were critical for their elimination in wastewater.

WITHDRAWN: Progress in the removal of organic microcontaminants from wastewater using high retention membrane bioreactors: A critical review

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/our-business/policies/article-withdrawal.

Is sequential batch reactor an efficient technology to protect recipient against non-steroidal anti-inflammatory drugs and paracetamol in treated wastewater?

The tested facility was a wastewater treatment plant (WWTP) in Swarzewo, where the wastewater treatment takes place in aeration chambers with activated sludge using sequential batch reactors (SBRs). The concentration of the following pharmaceuticals: ibuprofen, paracetamol, flurbiprofen, naproxen, diclofenac, and its metabolites 5OH-diclofenac and 4OH-diclofenac was tested in influents and effluents. Simultaneously, the conventional parameters were characterised. The removal of conventional pollutants was high (94.4-99.5%). At the same time, the removal of pharmaceuticals was variable. In the case of diclofenac and its metabolites, the concentration in the effluent was higher than in the influents. The risk quotients (RQs) calculated for analyzed pharmaceuticals suggest low environmental risk for selected species. However, negative impact for the biota due to the chronic presence of diclofenac cannot be excluded. It can be concluded that the SBRs, similarly to traditional flow activated sludge technology, are not efficient in the removal of target pharmaceuticals.

Removal performance and optimisation of pharmaceutical micropollutants from synthetic domestic wastewater by hybrid treatment

Occurrence of pharmaceutical micropollutants in aquatic environments has been one amongst serious environmental problems. During this study, two reactors, including a sequencing batch reactor (SBR) + powdered composite adsorbent (CA) (first reactor, SBR + CA) and a sequencing batch reactor (second reactor, SBR), were designed to treat synthetic wastewater. Powdered CA was added with a dosage of 4.8 g L^-1 to the first reactor. Tap water was contaminated with chemical oxygen demand (COD), ammonia and three pharmaceuticals, namely, atenolol (ATN), ciprofloxacin (CIP) and diazepam (DIA) to produce synthetic wastewater. The SBR + CA illustrated a better performance during synthetic municipal wastewater treatment. Up to 138.6 mg L^-1 (92.4%) of COD and up to 114.2 mg L^-1 (95.2%) of ammonia were removed by the first reactor. Moreover, optimisation of pharmaceuticals removal was conducted through response surface methodology (RSM) and artificial neural network (ANN). Based on the RSM, the best elimination of ATN (90.2%, 2.26 mg L^-1), CIP (94.0%, 2.35 mg L^-1) and DIA (95.5%, 2.39 mg L^-1) was detected at the optimum initial concentration of MPs (2.51 mg L^-1) and the contact time (15.8 h). In addition, ANN represented a high R² value (>0.99) and a rational mean squared error (<1.0) during the optimisation of micropollutants removal by both reactors. Moreover, adsorption isotherm study showed that the Freundlich isotherm could justify the abatement of micropollutants by using CA better than the Langmuir isotherm.

Removal of micropollutants from water by commercially available nanofiltration membranes

The current work is focused on the use of nanofiltration in the removal of micropollutants, specially drugs (diclofenac and ibuprofen) and heavy metal (zinc sulphate and zinc nitrate) from wastewater. The commercially available nanofiltration (NF) membranes (AFC 80, AFC 40, AFC 30) were characterised by demineralised water and the ability of the membranes to reject drugs and zinc(II) was subsequently examined. The influence of the operating conditions on the rejection and the permeate flux was evaluated. The operating conditions tested included the transmembrane pressure (5-30 bar); the effect of the feed concentration on the heavy metals rejection (50-200 mg L^-1); the effect of ionic strength on the diclofenac and ibuprofen rejection (0-10 g L^-1 NaCl) and the volumetric flow rate (5-15 L min^-1). It has been shown that increasing the transmembrane pressure increases the intensity of the permeate flow and rejection. Drugs rejection also increases with increasing bulk feed flow rates; however, decreases with increasing ionic strength (NaCl concentration in feed). Experimental data indicated that concentration polarisation existed in the membrane separation process. The stable permeation flux and high rejection of drugs and heavy metals indicated the potential of NF for the recovery of drugs and zinc(II) from wastewater.

Removal of Organic Micro-Pollutants by Conventional Membrane Bioreactors and High-Retention Membrane Bioreactors

The ubiquitous presence of organic micropollutants (OMPs) in the environment as a result of continuous discharge from wastewater treatment plants (WWTPs) into water matrices—even at trace concentrations (ng/L)—is of great concern, both in the public and environmental health domains. This fact essentially warrants developing and implementing energy-efficient, economical, sustainable and easy to handle technologies to meet stringent legislative requirements. Membrane-based processes—both stand-alone or integration of membrane processes—are an attractive option for the removal of OMPs because of their high reliability compared with conventional process, least chemical consumption and smaller footprint. This review summarizes recent research (mainly 2015–present) on the application of conventional aerobic and anaerobic membrane bioreactors used for the removal of organic micropollutants (OMP) from wastewater. Integration and hybridization of membrane processes with other physicochemical processes are becoming promising options for OMP removal. Recent studies on high retention membrane bioreactors (HRMBRs) such as osmotic membrane bioreactor (OMBRs) and membrane distillation bioreactors (MDBRs) are discussed. Future prospects of membrane bioreactors (MBRs) and HRMBRs for improving OMP removal from wastewater are also proposed.

The treatment of veterinary antibiotics in swine wastewater by biodegradation and Fenton-like oxidation

Elevated concentrations and potential toxicities of antibiotics in swine wastewater prompt the exploration of effective treatment methods to minimize the amount of antibiotics released to the environment. This study examined the technical and economic feasibility of using combined biodegradation and advanced oxidation processes for swine wastewater treatment. The up-flow anaerobic sludge blanket (UASB) reactor was mainly responsible for conventional organic pollutant removal (i.e., a COD removal rate of 75%). The subsequent sequencing batch reactor (SBR) under a short sludge retention time (SRT) of 3 days removed the biodegradable antibiotics by >95%, and hindered the nitrification process which retained NH₄⁺-N and reduced operational cost (since the treated wastewater was intended to be used as a farm fertilizer). The subsequent Fenton-like oxidation (with the aid of citric acid) achieved an average antibiotic removal efficiency of 74% under optimal reaction conditions: H₂O₂ dosage of 2.9 mM, [Fe²⁺]: [H₂O₂] = 1:3, [CA]: [Fe²⁺] = 1:1, pH 6.0, reaction time of 120 min. The superior treatment efficiency of Fenton-like compared to the conventional Fenton (74% vs 5%) under nearly neutral conditions was attributed to the chelating role of citric acid with Fe²⁺/Fe³⁺, leading to the enhanced Fe²⁺/Fe³⁺ solubility and therefore the promotion of ∙OH formation. This hybrid process of anaerobic and aerobic biodegradation and Fenton-like oxidation should be suitable and cost-effective for the treatment of wastewater with abundant conventional pollutants and persistent emerging trace contaminants.

Removal and biotransformation pathway of antibiotic sulfamethoxazole from municipal wastewater treatment by anaerobic membrane bioreactor

A lab-scale mesophilic anaerobic membrane bioreactor (AnMBR) was used to treat synthetic municipal wastewater with variable concentrations of antibiotic Sulfamethoxazole (SMX) and bulk organics in this study. The removal and biotransformation pathway of SMX in the AnMBR were systematically investigated during a 170 d of operation under hydraulic retention time of 1 d. Average SMX removal was 97.1% under feed SMX of 10-1000 μg/L, decreasing to 91.6 and 88.0% under feed SMX of 10,000 and 100,000 μg/L due to the inhibition effects of high SMX loading rate on anaerobic microorganisms. SMX biotransformation followed pseudo-first order reaction kinetics based on SMX removal independent of feed SMX of 10-1000 μg/L during continuous operation and also in a batch test under initial SMX of 100,000 μg/L. According to the identified 7 transformation products (TPs) by gas chromatography-mass spectrometry, the biotransformation pathway of SMX from municipal wastewater treatment via AnMBR was first proposed to consist of 2 primary routes: 1) Butylbenzenesulfonamide without antibiotic toxicity dominated under feed SMX of 10-100 μg/L; 2) Sulfanilamide with much lower antibiotic toxicity than SMX dominated under feed SMX of 1000-100000 μg/L, further transforming to secondary TPs (4-Aminothiophenol, Aniline, Acetylsulfanilamide) and tertiary TPs (4-Acetylaminothiophenol, Acetylaniline).

Selection and evaluation of water pretreatment technologies for managed aquifer recharge (MAR) with reclaimed water

Managed aquifer recharge with reclaimed water is a promising strategy for indirect potable reuse. However, residual contaminants in the treated wastewater effluent could potentially have adverse effects on human health. Hence, adequate water pretreatment is required. A multi-criteria approach was used to select and evaluate suitable water pretreatment technologies that can remove these critical contaminants in wastewater effluent for MAR identified in a previous study (Yuan et al., 2017). The treatment efficiency targets were calculated based on the concentrations and the suggested limits of critical contaminants. Treatment efficiency credits were then assigned to each treatment option for the removal of critical contaminants based on literature data. Treatment units that resulted in the highest efficiency credit scores were selected and combined into treatment train options, which were evaluated in terms of treatability, cost, and sustainability. This paper proposes an approach for the selection and evaluation of water treatment options, which will be helpful to guide the future implementation of MAR projects with reclaimed water.

Physico-chemical processes

The review scans research articles published in 2018 on physico-chemical processes for water and wastewater treatment. The paper includes eight sections, that is, membrane technology, granular filtration, flotation, adsorption, coagulation/flocculation, capacitive deionization, ion exchange, and oxidation. The membrane technology section further divides into six parts, including microfiltration, ultrafiltration, nanofiltration, reverse osmosis/forward osmosis, and membrane distillation. PRACTITIONER POINTS: Totally 266 articles on water and wastewater treatment have been scanned; The review is sectioned into 8 major parts;  Membrane technology has drawn the widest attention from the research community.

Evaluating Antibiotic Resistance Gene Correlations with Antibiotic Exposure Conditions in Anaerobic Membrane Bioreactors

Anaerobic membrane bioreactors (AnMBRs) are an emerging technology with potential to improve energy efficiency and effluent reuse in mainstream wastewater treatment. However, their contribution to the proliferation of contaminants of emerging concern, such as antibiotic resistance genes (ARGs), remains largely unknown. The purpose of this study was to determine the effect of select influent antibiotics at varying concentrations on the presence and abundance of ARGs in an AnMBR system and its effluent. Quantification of targeted ARGs revealed distinct profiles in biomass and effluent, with genes conferring resistance to different antibiotic classes dominating in biomass (macrolides) and effluent (sulfonamides). Effluent sul1 gene abundance was strongly correlated with abundance of intl1, signifying the potential importance of mobile genetic elements in ARG release from AnMBR systems. The addition of specific antibiotics also affected normalized abundances of their related ARGs, exemplifying the potential impact of selective pressures at both low (10 μg/L) and high (250 μg/L) influent antibiotic concentrations.