Microbial community modulates electrochemical performance and denitrification rate in a biocathodic autotrophic and heterotrophic denitrifying microbial fuel cell

Improvement of biotic nitrate reduction in constructed photoautotrophic biofilm-soil microbial fuel cells

The biotic nitrate reduction rate in freshwater ecosystems is typically constrained by the scarcity of carbon sources. In this study, 'two-chambers' - 'two-electrodes' photoautotrophic biofilm-soil microbial fuel cells (P-SMFC) was developed to accelerate nitrate reduction by activating in situ electron donors that originated from the soil organic carbon (SOC). The nitrate reduction rate of P-SMFC (0.1341 d-1) improved by ∼ 1.6 times on the 28th day compared to the control photoautotrophic biofilm. The relative abundance of electroactive bacterium increased in the P-SMFC and this bacterium contributed to obtain electrons from SOC. Biochar amendment decreased the resistivity of P-SMFC, increased the electron transferring efficiency, and mitigated anodic acidification, which continuously facilitated the thriving of putative electroactive bacterium and promoted current generation. The results from physiological and ecological tests revealed that the cathodic photoautotrophic biofilm produced more extracellular protein, increased the relative abundance of Lachnospiraceae, Magnetospirillaceae, Pseudomonadaceae, and Sphingomonadaceae, and improved the activity of nitrate reductase and ATPase. Correspondingly, P-SMFC in the presence of biochar achieved the highest reaction rate constant for nitrate reduction (kobs) (0.2092 d-1) which was 2.4 times higher than the control photoautotrophic biofilm. This study provided a new strategy to vitalize in situ carbon sources in paddy soil for nitrate reduction by the construction of P-SMFC.

Vertical spatial denitrification performance and microbial community composition in denitrification biofilters coupled with water electrolysis

In this study, a denitrification biofilter coupled with water electrolysis (DNBF-WE) was developed as a novel heterotrophic-hydrogen autotrophic denitrification system, which could enhance denitrification with limited organic carbon in the secondary effluent. The volumetric denitrification rate of DNBF-WE reached 152.16 g N m-3 d-1 (C/N = 2, I = 60 mA, and HRT = 5 h). Besides, the vertical spatial denitrification of DNBF-WE was explored, with the nitrate removal rate being 49.5%, 16.3%, and 29.3% in the top, middle, and bottom, respectively. The concentration of extracellular polymeric substances (EPSs) was consistent with the denitrification performance vertically. The high-throughput sequencing analysis results revealed that autotrophic denitrification bacteria (e.g. Thauera) gradually enriched along DNBF-WE from top to bottom. The functional gene prediction results illustrated the vertical stratification mechanisms of the denitrification. Both dissimilatory nitrate reduction and denitrification contributed to nitrate removal, and denitrification became more advantageous with an increase in the filter depth. The research on both the performance of DNBF-WE and the characteristics of microbial communities in the vertical zones of the biofilter may lay a foundation for the biofilter denitrification process in practice.

Granular activated carbon assisted biocathode for effective electrotrophic denitrification in microbial fuel cells

Granular activated carbon (GAC) has been widely used at the anode of a microbial fuel cell (MFC) to enhance anode performance due to its outstanding capacitance property. To the best of our knowledge, there haven't been any studies on GAC in the cathode for biofilm development and nitrate reduction in MFC. In this study, by adding GAC to biocathode, we investigated the impact of different GAC amounts and stirring speeds on power generation and nitrate reduction rate in MFC. The denitrification rate was found to be nearly two-times higher in MFCs with GAC (0.046 ± 0.0016 kg m-3 d-1) compared to that deprived of GAC (0.024 ± 0.0012 kg m-3 d-1). The electrotrophic denitrification has produced a maximum power density of 37.6 ± 4.8 mW m-2, which was further increased to 79.2 ± 7.4 mW m-2 with the amount of GAC in the biocathode. A comparative study performed with chemical catalyst (Pt carbon with air sparging) cathode and GAC biocathode showed that power densities produced with GAC biocathode were close to that with Pt cathode. Cyclic voltammetry analysis conducted at 10 mV s-1 between -0.9 V and +0.3 V (vs. Ag/AgCl) showed consistent reduction peaks at -0.6V (Ag/AgCl) confirming the reduction reaction in the biocathode. This demonstrates that the GAC biocathode used in this research is effective at producing power density and denitrification in MFC. Our belief that the nitrate reduction was caused by the GAC biocathode in MFC was further strengthened when SEM analysis showing bacterial aggregation and biofilm formation on the surface of GAC. The GAC biocathode system described in this research may be an excellent substitute for MFC's dual functions of current generation and nitrate reduction.

Enhancing biocathode denitrification performance with nano-Fe3O4 under polarity period reversal

The presence of excessive concentrations of nitrate poses a threat to both the environment and human health, and the bioelectrochemical systems (BESs) are attractive green technologies for nitrate removal. However, the denitrification efficiency in the BESs is still limited by slow biofilm formation and nitrate removal. In this work, we demonstrate the efficacy of novel combination of magnetite nanoparticles (nano-Fe3O4) with the anode-cathode polarity period reversal (PPR-Fe3O4) for improving the performance of BESs. After only two-week cultivation, the highest cathodic current density (7.71 ± 1.01 A m-2) and NO3--N removal rate (8.19 ± 0.97 g m-2 d-1) reported to date were obtained in the PPR-Fe3O4 process (i.e., polarity period reversal with nano-Fe3O4 added) at applied working voltage of -0.2 and -0.5 V (vs Ag/AgCl) under bioanodic and biocathodic conditions, respectively. Compared with the polarity reversal once only process, the PPR process (i.e., polarity period reversal in the absence of nano-Fe3O4) enhanced bioelectroactivity through increasing biofilm biomass and altering microbial community structure. Nano-Fe3O4 could enhance extracellular electron transfer as a result of promoting the formation of extracellular polymers containing Fe3O4 and reducing charge transfer resistance of bioelectrodes. This work develops a novel biocathode denitrification strategy to achieve efficient nitrate removal after rapid cultivation.

Sustainable in situ ammonia recovery from municipal solid waste leachate in a single-stream microbial desalination cell

Municipal solid waste (MSW) leachate is one of the most hazardous waste streams leading to great potential risk to environment, and a renewable resource with high concentrations of organic contaminant and ammonia. High energy consumption and chemical input are still the challenges for ammonia recovery from MSW leachate. Here, a single-stream microbial desalination cell (SMDC) was successfully developed for simultaneous energy extraction from organic contaminant and in-situ energy utilization for ammonia recovery. 70% of the organic contaminant from the actual MSW leachate was removed, and 24.9% of the total ammonia was recovered as high-purity (NH4)2SO4. The additional desalination chamber introduced into the SMDC can potentially enhance the NH4+ migration that was determined by the NH4+ concentration gradient and electric field. More than 30% of the total nitrogen was lost, as revealed by nitrogen mass balance analysis, probably resulting from the anodic denitrification process driven by denitrifying microorganisms, e.g., Thauera, which thrived in the anode chamber. Concomitantly, the chemical input for ammonia stripping can be reduced by up to 68% due to the relatively low buffer capacity of the catholyte and the OH- production from the cathode reaction. This SMDC can be an effective and environmentally sustainable solution for MSW leachate treatment and resource recovery.

Simultaneous denitrification and electricity generation in a methane-powered bioelectrochemical system

Bioelectrochemical system is a novel method for controlling down nitrate pollution, yet the feasibility of using methane as the electron donors for denitrification in this system remains unknown. In this study, using the effluent from mother BESs as inocula, a denitrifying anaerobic methane oxidation bioelectrochemical system was successfully started up in 92 days. When operated with 50 mmol/L phosphate buffer solution at pH 7 and 30°C, the maximum methane consumption, nitrate, and total nitrogen removal load reached 0.23 ± 0.01 mmol/d, 551.0 ± 22.1 mg N/m3 /d, and 64.0 ± 18.8 mg N/m3 /d, respectively. Meanwhile, the peak voltage of 93 ± 4 mV, the anodic coulombic efficiency of 6.99 ± 0.20%, and the maximum power density of 219.86 mW/m3 were obtained. The metagenomics profiles revealed that the dominant denitrifying bacteria in the cathodic chamber reduced most nitrate to nitrite through denitrification and assimilatory reduction. In the anodic chamber, various archaea including methanotrophs and methanogens converted methane via reverse methanogenesis to form formate (or H2 ), acetate, and methyl compounds, which were than utilized by electroactive bacteria to generate electricity. PRACTITIONER POINTS: A denitrifying anaerobic methane oxidation BES was successfully started up in 92 d. Simultaneous removal of methane and nitrate was achieved in the DAMO-BES. Functional genes related to AMO and denitrification were detected in the DAMO-BES. Methylocystis can mediate AMO in the anode and denitrification in the cathode.

Examining current trends and future outlook of bio-electrochemical systems (BES) for nutrient conversion and recovery: an overview

Nutrient-rich waste streams from domestic and industrial sources and the increasing application of synthetic fertilizers have resulted in a huge-scale influx of reactive nitrogen and phosphorus in the environment. The higher concentrations of these pollutants induce eutrophication and foster degradation of aquatic biodiversity. Besides, phosphorus being non-renewable resource is under the risk of rapid depletion. Hence, recovery and reuse of the phosphorus and nitrogen are necessary. Over the years, nutrient recovery, low-carbon energy, and sustainable bioremediation of wastewater have received significant interest. The conventional wastewater treatment technologies have higher energy demand and nutrient removal entails a major cost in the treatment process. For these issues, bio-electrochemical system (BES) has been considered as sustainable and environment friendly wastewater treatment technologies that utilize the energy contained in the wastewater so as to recovery nutrients and purify wastewater. Therefore, this article comprehensively focuses and critically analyzes the potential sources of nutrients, working mechanism of BES, and different nutrient recovery strategies to unlock the upscaling opportunities. Also, economic analysis was done to understand the technical feasibility and potential market value of recovered nutrients. Hence, this review article will be useful in establishing waste management policies and framework along with development of advanced configurations with major emphasis on nutrient recovery rather than removal from the waste stream.

Recovery of electron and carbon source from agricultural waste corncob by microbial electrochemical system to enhance wastewater denitrification

The denitrification process in wastewater treatment plants (WWTPs) is limited by insufficient carbon sources. Agricultural waste corncob was investigated for its feasibility as a low-cost carbon source for efficient denitrification. The results showed that the corncob as the carbon source exhibited a similar denitrification rate (19.01 ± 0.03 gNO₃^--N/m³d) to that of the traditional carbon source sodium acetate (19.13 ± 0.37 gNO₃^--N/m³d). When filling corncob into a microbial electrochemical system (MES) three-dimensional anode, the release of corncob carbon sources was well controlled with an improved denitrification rate (20.73 ± 0.20 gNO₃^--N/m³d). Carbon source and electron recovered from corncob led to autotrophic denitrification and heterotrophic denitrification occurred in the MES cathode, which synergistically improved the denitrification performance of the system. The proposed strategy for enhanced nitrogen removal by autotrophic coupled with heterotrophic denitrification using agricultural waste corncob as the sole carbon source opened up an attractive route for low-cost and safe deep nitrogen removal in WWTPs and resource utilization for agricultural waste corncob.

Enhanced performance and microbial interactions of shallow wetland bed coupling with functional biocathode microbial electrochemical system (MES)

It is essential to remediate the polluted urban river, which endangers the aquatic creatures and affected human body's senses. The treatment wetland combined with microbial electrochemical system (MES) used for the remediation is becoming a new research focus due to its ideal pollutants removal efficiency and small footprint. Here this paper provided a kind of novel shallow wetland bed coupling with close-circuit microbial electrochemical system (WB-CMES) to remove pollutants in surface water. In contrast to the shallow wetland bed coupling with open-circuit MES (WB-OMES) and the shallow wetland bed without MES (WB), the enhancing effects and pollutants removal pathway were evaluated. After 62-day operation, average TN removal efficiency in WB-CMES was 87.7%, which was 19.7% and 13.8% higher than that of WB-OMES and WB respectively. The rate coefficient k of NO₃^--N degradation in WB-CMES was 1.6 and 1.8 times higher than that in WB-OMES and WB. The results of chlorophyll, protein and superoxide dismutase (SOD) in WB-CMES were 27.3%, 44.3% and 12.9% higher than those in WB. The microbial community structure analysis indicated that electroactive bacteria on anode like Desulfobulbus could oxidize organics and generate electrons to compensate cathode, meanwhile, cathode could enrich more species of functional bacteria like Rhodobacter, Pirellula, Hyphomicrobium, Thauera, which had a synergistic effect on oxygen reduction, nitrogen removal and plant growth. The results indicated that oxygen produced by submerged plants could be utilized by the oxygen-reducing functional biocathode of MES and the proper aerobic and anoxic environment might enhance nitrate removal mainly through simultaneous nitrification and denitrification (SND), aerobic denitrification and anammox. This research provided a novel technology with advantages of simple operation, flexible configuration, easy scale-up and low cost for application in remediation of highly polluted surface water.

Efficient use of electrons in a double-anode microbial fuel cell-biofilm electrode reactor self-powered coupled system for degradation of azo dyes

A coupled system consisting of a double-anode microbial fuel cell (MFC) unit and a biofilm electrode reactor (BER) has been applied to degrade the azo dye reactive brilliant red X-3B. In this system, the MFC effluent was used as the input of the BER. The MFC preliminarily degraded X-3B while generating electricity, and the BER obtained electrons from the MFC through the external circuit to continue degrading pollutants without the need for an external power supply. The X-3B removal efficiency was 41.93% higher in the coupled system than the control when the X-3B concentration was 3000 mg/L. The analysis of intermediate products showed that the azo bond of X-3B broke in the MFC, generating a large number of complex intermediates such as anthraquinones, which were further degraded into simple organic compounds in the BER. Meanwhile, the abundance of microbial taxa related to the degradation of refractory organics in the MFC was high, as was that of microbial taxa related to the degradation of simple organics in the BER. Furthermore, the abundance of microorganisms related to power generation in the MFC increased. These results provided an efficient strategy for improving electron utilization efficiency in the coupling system of bioelectrochemical system.

Improvement of zero waste sustainable recovery using microbial energy generation systems: A comprehensive review

Microbial energy generation systems, i.e., bioelectrochemical systems (BESs) are promising sustainable technologies that have been used in different fields of application such as biofuel production, biosensor, nutrient recovery, wastewater treatment, and heavy metals removal. However, BESs face great challenges such as large-scale application in real time, low power performance, and suitable materials for their configuration. This review paper aimed to discuss the use of BES systems such as conventional microbial fuel cells (MFCs), as well as plant microbial fuel cell (P-MFC), sediment microbial fuel cell (S-MFC), constructed wetland microbial fuel cell (CW-MFC), osmotic microbial fuel cell (OsMFC), photo-bioelectrochemical fuel cell (PBFC), and MFC-Fenton systems in the zero waste sustainable recovery process. Firstly, the configuration and electrode materials used in BESs as the main sources to improve the performance of these technologies are discussed. Additionally, zero waste recovery process from solid and wastewater feedstock, i.e., energy recovery: electricity generation (from 12 to 26,680 mW m^-2) and fuel generation, i.e., H₂ (170 ± 2.7 L^-1 L^-1 d^-1) and CH₄ (107.6 ± 3.2 mL^-1 g^-1), nutrient recovery of 100% (PO₄³-P), and 13-99% (NH₄⁺-N), heavy metal removal/recovery: water recovery, nitrate (100%), sulfate (53-99%), and sulfide recovery/removal (99%), antibiotic, dye removal, and other product recovery are critically analyzed in this review paper. Finally, the perspective and challenges, and future outlook are highlighted. There is no doubt that BES technologies are an economical option for the simultaneous zero waste elimination and energy recovery. However, more research is required to carry out the large-scale application of BES, as well as their commercialization.

Advanced bioelectrochemical system for nitrogen removal in wastewater

Nitrogen (N) pollution in water has become a serious issue that cannot be ignored due to the harm posed by excessive nitrogen to environmental safety and human health; as such, N concentrations in water are strictly limited. The bioelectrochemical system (BES) is a new method to remove excessive N from water, and has attracted considerable attention. Compared with other methods, it is highly efficient and has low energy consumption. However, the BES has not been applied for N removal in practice due to lack of in-depth research on the mechanism and construction of high-performance electrodes, separators, and reactor configurations; this highlights a need to review and examine the efforts in this field. This paper provides a comprehensive review on the current BES research for N removal focusing on the reaction principles, reactor configurations, electrodes and separators, and treatment of actual wastewater; the corresponding performances in these realms are also discussed. Finally, the prospects for N removal in water using the BES are presented.

Transforming heterotrophic to autotrophic denitrification process: Insights into microbial community, interspecific interaction and nitrogen metabolism

For investigating the microbial community, interspecific interaction and nitrogen metabolism during the transform process from heterotrophic to synergistic and autotrophic denitrification, a filter was built, and carbon source and sulfur concentration were changed to release the transformation process. The results demonstrated that the transformation process was feasible to keep nitrate nitrogen (NO₃^--N) discharge concentration lower than 15 mg L^-1, however, nitrite nitrogen (NO₂^--N) accumulation and its rate reached 7.85% at initial stages. The dominant denitrification gunes were Methylophilaceae, Thiovulaceae and Hydrogenophilaceae for three processes, respectively, and the microbial interspecific interaction of heterotrophic denitrification was more complex than others. NO₂^--N accumulation was confirmed by the low abundance of EC1.7.7.1 and EC1.7.2.1, and the dominance degree of dark oxidation of sulfur compounds and dark sulfide oxidation improved in synthesis and autotrophic denitrifications.

A novel, rapidly preparable and easily maintainable biocathode electrochemical biosensor for the continuous and stable detection of nitrite in water

Nitrite is a highly toxic and pathogenic pollutant that is widely distributed in various nitrogenous wastewaters. Therefore, there is an urgent need for fast and stable nitrite detection to avoid water pollution and protect human health. In this study, we developed a novel rapidly preparable and easily maintainable biocathode electrochemical biosensor (BEB) using nitrite-reducing bacteria as the detectors to realize continuous nitrite monitoring in wastewater. The preparation of the biocathode was shortened by the polarity inversion method to less than 6 d. The BEB could detect nitrite solution samples in the range of 0.1- 16.0 mg NO₂^--N L^-1 within 1.7 min. The BEB was also successfully used to detect nitrite in real wastewater with a relative error < 4.0% and a relative standard deviation < 5.8%. In addition, the BEB could be easily maintained by an operation mode of microbial fuel cells and stably detected nitrite for at least 150 tests. Our study provided a feasible and convenient way to develop electrochemical biosensors based on the biocathode for continuous and stable monitoring of pollutants in wastewater.

Energetics, electron uptake mechanisms and limitations of electroautotrophs growing on biocathodes - A review

Electroautotrophs are microorganisms that can take the electrons needed for energy generation, CO₂ fixation and other metabolic reactions from a polarized electrode. They have been the focus of intense research for its application in wastewater treatment, bioelectrosynthetic processes and hydrogen generation. As a general trend, current densities produced by the electron uptake of these microorganisms are low, limiting their applicability at large scale. In this work, the electron uptake mechanisms that may operate in electroautotrophs are reviewed, aiming at finding possible causes for this low performance. Biomass yields, growth rates and electron uptake rates observed when these microorganisms use chemical electron donors are compared with those typically obtained with electrodes, to explore limitations and advantages inherent to the electroautotrophic metabolism. Also, the factors affecting biofilm development are analysed to show how interfacial interactions condition bacterial adhesion, biofilm growth and electrons uptake. Finally, possible strategies to overcome these limitations are described.

Treatment of municipal wastewater by employing membrane bioreactors combined with efficient nitration microbial communities isolated by Isolation Chip with Plate Streaking technology

In this research, we developed a method so-called Isolation Chip with Plate Streaking (ICPS) to selectively enrich nitrifying microbial consortium for treating municipal wastewater. In batch experiment, these bacterial communities were able to remove NH₃ -N in 72 h with an efficiency of 96%. Firmicutes, Bacteroidetes, and Proteobacteria species are dominant bacteria in these communities. When the bacterial communities were used in the membrane bioreactor under typical condition, the removal efficiency was 81.0%. In contrast, under the actual wastewater condition, the efficiency could reach 91.2%. All above results showed clearly that the consortium selected by our ICPS method could achieve high-efficient NH₃ -N removal, thus offering a reliable technique for screening functional microorganisms in the field of water treatment. PRACTITIONER POINTS: ICPS technology was designed and used for screening specialized NH₃ -N-removing isolates. The screening process benefited the growth of the dominant nitrifying bacteria Firmicutes and Bacteroidetes. When the functional bacteria applied into the MBR, the NH₃ -N removal efficiency was 91.2% under actual wastewater conditions.

Degradation of high concentration starch and biocathode autotrophic denitrification using photo microbial fuel cell

In the study, a dual-chamber photo MFC was constructed with a photosynthetic bacteria consortium PB-Z and a heterotrophic nitrifier C16 as anode and cathode inoculant, respectively. The electron released from starch degradation in the anode by photosynthetic bacteria was transferred to the cathode, which was utilized by the nitrifying bacteria C16 to realize autotrophic denitrification. Lower resistance was more conducive to the electron transfer and pollutants removal. Comparing with natural light, continuous light greatly promoted starch degradation by the photosynthetic bacteria in the anode and the denitrification by the nitrifying bacteria in the cathode. Under continuous light and external resistance of 500 Ω, high concentration starch was degraded by photosynthetic bacteria PB-Z and the COD removal efficiency reached up to 88.45% within 12 d, and nitrate of 95.8% was removed within 4 d by autotrophic denitrification by heterotrophic nitrifier C16. The study provides some enlightenment and reference for the application of MFC in the field of wastewater treatment.

Performance evaluation of a photosynthetic microbial fuel cell (PMFC) using Chlamydomonas reinhardtii at cathode

This study reports the use of Chlamydomonas reinhardtiiat the cathode in a photosynthetic microbial fuel cell (PMFC). The PMFC produced power and current density of 15.21 W m^-3 and 39 A m^-3, respectively. The specific growth rate of algae culture at the cathode was 0.284 day^-1. The system achieved COD removal at 73.30% with a Coulombic efficiency of 9.068%. The usability of algae biomass was assessed in terms of its total phenol content (157.69 mg GAE/g algae DW), antioxidant activity (IC₅₀ = 67.07 µg/ml), total Chlorophyll (18.95 mg/g), total Carotenoids (2.40 mg/g), and antibacterial properties against known pathogens. Overall, the study's findings suggested thatC. reinhardtiisupports high power output from a PMFC and is highly resourceful in terms of value-added products.

Electrochemical Fingerprint Biosensor for Natural Indigo Dye Yielding Plants Analysis

Indigo is a plant dye that has been used as an important dye by various ancient civilizations throughout history. Today, due to environmental and health concerns, plant indigo is re-entering the market. Strobilanthes cusia (Nees) Kuntze is the most widely used species in China for indigo preparation. However, other species under Strobilanthes have a similar feature. In this work, 12 Strobilanthes spp. were analyzed using electrochemical fingerprinting technology. Depending on their electrochemically active molecules, they can be quickly identified by fingerprinting. In addition, the fingerprint obtained under different conditions can be used to produce scattered patter and heatmap. These patterns make plant identification more convenient. Since the electrochemically active components in plants reflect the differences at the gene level to some extent, the obtained electrochemical fingerprints are further used for the discussion of phylogenetics.

An overview in the development of cathode materials for the improvement in power generation of microbial fuel cells

Since the high cost and low power generation hinder the overall practical application of microbial fuel cells (MFCs), numerous attempts have been made in the field of cathode materials to enhance the electrical performance of MFCs because they directly catalyze the oxygen reduction reactions (ORR). To choose a proper cathode material, following principles such as ORR activity, conductivity, cost-efficiency, durability, surface area, and accessibility should be taken into consideration. In preparation of cathode materials, versatile materials have been chosen, synthesized, or modified to achieve an improvement in power generation of MFCs. The most widely applied cathode materials could be categorized into three classes, namely carbon-base materials, metal-based materials, and biocatalysts. This review summarizes the utilization, development, and the cost of cathode materials applied in MFCs and tries to highlight the effective modification methods of cathode materials which have helped in achieving enhanced power generation of MFCs in recent years.

In-situ utilizing the produced electricity to regulate substrate conversion in denitrifying sulfide removal microbial fuel cells

A denitrifying sulfide removal microbial fuel cell, incorporated with a capacitor and run in an alternate charging and discharging mode, was developed to in-situ utilize the produced electricity. The switching interval, external resistance distribution and temperature were used to adjust substrates conversion via regulating electrode potentials. The switching interval of 10 min favored the formation of sulfur and gaseous nitrogen. Adjusting the external resistances via the constant anode potential method was a feasible measure for regulating the cathode potential and promoting nitrate reduction, achieving a total nitrogen removal rate of 16.5 ± 0.8 g N/(m³ d) and a gaseous nitrogen formation percent of 32.2 ± 1.5%. 30 °C favored gaseous nitrogen formation while 10 °C and 40 °C benefited sulfur formation. In-situ utilization of the produced electricity shifted the microbial community structure. This work provided a novel approach to regulate the substrate conversion by in-situ utilizing the produced electricity.

Autotrophic denitrification in constructed wetlands: Achievements and challenges

The use of constructed wetlands for wastewater treatment is rapidly increasing worldwide due to their advantages of low operating and maintenance costs. Denitrification in constructed wetlands is dependent on the presence of organic carbon sources, and the shortage of organic carbon is the primary hurdle for nitrate removal. Therefore, the use of inorganic electronic donors has emerged as an alternative. This paper provides a comprehensive review of nitrate removal pathways using various inorganic electron donors and the performance and development of autotrophic denitrification in constructed wetlands. The main environmental parameters and operating conditions for nitrate removal in wetlands are discussed, and the challenges currently faced in the application of enhanced autotrophic denitrification wetlands are emphasized. Overall, this review illustrates the need for a deep understanding of the complex interrelationships among environmental and operational parameters and wetland substrates for improving the wastewater treatment performance of constructed wetlands.

Nitric oxide reduction by microbial fuel cell with carbon based gas diffusion cathode for power generation and gas purification

Nitric oxide (NO) from anthropogenic emission is one of the main air contaminants and induces many environmental problems. Microbial fuel cells (MFCs) with gas diffusion cathode provide an alternative technology for NO reduction. In this work, pure NO as the sole electron acceptor of MFCs with gas diffusion cathode (NO-MFCs) was verified. The NO-MFCs obtained a maximum power density of 489 ± 50 mW/m². Compared with MFCs using O₂ in air as electron acceptor (Air-MFCs), the columbic efficiency increased from 23.2% ± 4.3% (Air-MFCs) to 55.7% ± 4.6% (NO-MFCs). The NO removal rate was 12.33 ± 0.14 mg/L/h and N₂ was the main reduction product. Cathode reduction was the dominant pathway of NO conversion in NO-MFCs, including abiotic electrochemical reduction and microbial denitrification process. The predominant genera in anodic microbial community changed from exoelectrogenic bacteria in Air-MFCs to denitrifying bacteria in NO-MFCs and effected the power generation.

Performance evaluation of microbial fuel cell for landfill leachate treatment: Research updates and synergistic effects of hybrid systems

Over half of century, sanitary landfill was and is still the most economical treatment strategy for solid waste disposal, but the environmental risks associated with the leachate have brought attention of scientists for its proper treatment to avoid surface and ground water deterioration. Most of the treatment technologies are energy-negative and cost intensive processes, which are unable to meet current environmental regulations. There are continuous demands of alternatives concomitant with positive energy and high effluent quality. Microbial fuel cells (MFCs) were launched in the last two decades as a potential treatment technology with bioelectricity generation accompanied with simultaneous carbon and nutrient removal. This study reviews capability and mechanisms of carbon, nitrogen and phosphorous removal from landfill leachate through MFC technology, as well as summarizes and discusses the recent advances of standalone and hybrid MFCs performances in landfill leachate (LFL) treatment. Recent improvements and synergetic effect of hybrid MFC technology upon the increasing of power densities, organic and nutrient removal, and future challenges were discussed in details.

Enhanced treatment of landfill leachate with cathodic algal biofilm and oxygen-consuming unit in a hybrid microbial fuel cell system

An innovative cathodic algal biofilm microbial fuel cell equipped with a bioactive oxygen consuming unit (AB-OCU-MFC) was proposed for enhancing the leachate treatment containing biorefractory organic matters and high strength of ammonium nitrogen. The proposed AB-OCU-MFC performed better with regard to COD, NH₄⁺-N, TN removals and algal biomass yield than standalone algal biofilm-MFC and control reactors. AB-OCU-MFC with OCU of 2 cm thickness removed more than 86% of COD, 89.4% of NH₄⁺-N, 76.7% of TN and produced a maximum voltage of 0.39 V and biomass productivity of 1.23 g·L^-1·d^-1. The High-throughput sequencing of DNA showed a significant change in microbial community of reactors implemented with OCU, in which the ratio of exoelectrogenic bacteria of anode and denitrifying bacteria on cathode were significantly increased. The results obtained by cathodic algal biofilm MFC with low cost and bioactive barrier of OCU, would provide a new sight for practical application of MFC.

Performance evaluation of algae assisted microbial fuel cell under outdoor conditions

This study reports for the first time an operation of an outdoor algae assisted Microbial Fuel Cell (MFC). The MFC (10 L) comprised of low-cost materials like rock phosphate blended clayware & low-density polyethylene bags as anodic & cathodic chamber respectively. Algae biomass after lipid extraction at 2 g/l served as electron donor at the anode. Chlorella vulgaris at cathode provided oxygen as electron acceptor and served as lipid source. The MFCs performed well in all aspects namely energy recovery, algae productivity, and cost of operation. The 5% RP-MFCs gave 0.307 kg/m³d algal productivity, 0.09 kg/m³d lipid productivity, and 11.5318 kWh/m³ of net energy recovery (NER). Rock phosphate served as a slow and constant source of phosphorus supporting algae growth. Proteobacteria (45.14%) were the dominant phyla while Alicyliphilus (5.46%) and Dechloromonas (4.74%) were the dominant genera at the anode. The estimated cost of the system was $11.225 only.

The mechanism of nitrate-Cr(VI) reduction mediated by microbial under different initial pHs

To date, comparatively little research is known about the role of pH conditions in bioremediation of Cr(VI) contaminated aquifers. This study explored microbial Cr(VI) reduction and denitrification under different initial pHs. The underlying mechanism was also investigated. When testing 50 mg/L-N nitrate and 10 mg/L Cr(VI), complete contaminants removal was observed at initial pH 10.0 and 11.0, and only 10 %-30 % of removal achieved under other conditions, which might be ascribe to the significant up-regulation of functional genes narG (8.31 and 10.46 folds) and azoR (24.90 and 15.96 folds) at initial pH 10.0 and 11.0. Metagenomic sequencing showed that alkali tolerant bacteria played major roles in the NO₃^--Cr(VI) reduction (i.e. Pannonibacter increased by 13.08 % and 25.24 % at initial pH 10.0 and 11.0), and metabolic pathways of Degradation and Energy were found of increased abundant. Furthermore, a significative study suggested that potential interspecies cooperation existed at initial pH 11.0 to facilitating the simultaneous removal of contaminants, and Pannonibacter indicus might be an important participant in the degradation of contaminants. The results of this study will fully understand the metabolic patterns of bacteria under alkaline conditions, expand the range of available functional bacteria, and enhance the practical aspects of co-contaminants remediation.

Simultaneous wastewater treatment and energy harvesting in microbial fuel cells: an update on the biocatalysts

The development of microbial fuel cell (MFC) makes it possible to generate clean electricity as well as remove pollutants from wastewater. Extensive studies on MFC have focused on structural design and performance optimization, and tremendous advances have been made in these fields. However, there is still a lack of systematic analysis on biocatalysts used in MFCs, especially when it comes to pollutant removal and simultaneous energy recovery. In this review, we aim to provide an update on MFC-based wastewater treatment and energy harvesting research, and analyze various biocatalysts used in MFCs and their underlying mechanisms in pollutant removal as well as energy recovery from wastewater. Lastly, we highlight key future research areas that will further our understanding in improving MFC performance for simultaneous wastewater treatment and sustainable energy harvesting.

Simultaneous removal of organics, sulfide and ammonium coupled with electricity generation in a loop microbial fuel cell system

A loop microbial fuel cell (MFC) system consisting of a denitrifying organics/sulfide removal MFC and a nitrification chamber was developed, and its performance at different feeding ratios of total organic carbon to sulfide (TOC/S) and dissolved oxygen (DO) levels of cathodic feeding were investigated. High feeding TOC/S ratio favored elemental sulfur production and anodic electron recovery. Introducing oxygen into the cathode enhanced nitrogen removal and electricity generation but hindered elemental sulfur production. At the optimal feeding TOC/S mass ratio of 4.69 and cathodic feeding DO of 4.2 mg/L, 100% of TOC, 100% of sulfide and 82.6 ± 0.9% of total nitrogen were removed, achieving a sulfur production percentage of 35.1 ± 4.4% and a coulombic efficiency of 53.0 ± 2.2%. Cathodic nitrogen removal was catalyzed by denitrifiers, nitrifiers and anammox bacteria. This work provided a novel approach for simultaneously removing organics, sulfide and ammonium coupled with electricity generation from wastewater.

Aerobic granular sludge operation and nutrients removal mechanism in a novel configuration reactor combined sequencing batch reactor and continuous-flow reactor

A novel aerobic granular sludge (AGS) system called SBR (sequencing batch reactor)-CF (continuous-flow) system merging the advantages of sequencing batch reactors (SBRs) and continuous flow (CF) reactors was developed. The AGS was successfully operated in the SBR-CF system which consisted of four same SBRs (each served as settling tank/anaerobic feeding tank/aerobic reacting tank in turn). The effects of aeration intensity and hydraulic retention time (HRT) on the SBR-CF system were studied. The results showed strong aeration intensity (9.74 h^-1 in this study) and appropriate HRT (9 h in this study) were more favorable to the nutrients removal. The EEM-PARAFAC analysis was applied to characterize the LB-EPS, TB-EPS and domestic wastewater, as results TB-EPS was found play an important role in the biosorption in COD removal of the SBR-CF system. In addition, a preliminary conceptual reaction process model in the SBR-CF system was built using high-throughput pyrosequencing and phylogenetic assignment.

Simultaneous sulfide removal, nitrogen removal and electricity generation in a coupled microbial fuel cell system

A coupled microbial fuel cell (MFC) system, consisting of a nitrifying sulfide removal MFC and a denitrifying sulfide removal MFC, was assembled to simultaneously treat ammonium and sulfide in wastewater. It provided a promising approach to recover electricity from wastewater containing sulfide and ammonium. Considering both substrate removal and electricity generation performance, the desirable feeding S/N molar ratio was deemed as 3 and the optimal temperature was found to be 30 °C. Under this condition, the coupled MFC achieved a sum coulomb production of 554.8 C/d, a total nitrogen removal efficiency of 58.7 ± 1.3% and a sulfur production percent of 27.4 ± 0.4-33.3 ± 0.9%. The introduction of nitrifiers and electroactive oxic microbes from the oxic-cathode chamber into the anoxic-cathode chamber favored nitrogen removal.