Continuous production of biohydrogen from brewery effluent using co-culture of mutated Rhodobacter M 19 and Enterobacter aerogenes

Harnessing Nanomaterials for Enhanced Biohydrogen Generation from Wastewater

Biohydrogen is considered a green fuel due to its eco-friendly nature since it only produces water and energy on combustion. However, their lower yield and production rate is one of the foremost challenges that need an instant sustainable approach. The use of nanotechnology is a potential approach for the enhanced generation of biohydrogen, owing to the significant characteristics of the nanomaterials such as greater specificity, high surface-area-to-volume ratio, better reactivity and dispersibility, enhanced catalytic activity, superb selectivity, greater electron transfer, and better anaerobic microbiota activity. This article explores the recent trends and innovations in the production of biohydrogen from wastewater through the applications of different nanomaterials. The potential of various nanomaterials employed for biohydrogen production from wastewater is evaluated and the impacts of important parameters such as the concentration and size of the nanomaterials, temperature, and pH on the production and yield of biohydrogen are explained in detail. Several pathways involved in the mechanistic approach of biohydrogen generation from wastewater are critically assessed. Lastly, numerous technological challenges are highlighted and recommendations regarding future research are also provided.

Hydrogen from sewage sludge: Production methods, influencing factors, challenges, and prospects

The rising global population and rapid industrialization have frequently resulted in a significant escalation in energy requirements. Hydrogen, renowned for its eco-friendly and renewable characteristics, has garnered substantial interest as a fuel alternative to address the energy needs currently fulfilled by fossil fuels. Embracing such energy substitutes holds pivotal importance in advancing environmental sustainability, aiding in the reduction of greenhouse gas emissions - the primary catalysts of global warming and climate fluctuations. This study elucidates recent trends in sewage sludge (SS)-derived hydrogen through diverse production pathways and critically evaluates the impact of varying parameters on hydrogen yield. Furthermore, a detailed analysis of the breakdown of the hydrogen generation process from SS is provided, along with an assessment of its economic dimensions. The review culminates by illuminating key obstacles in the adoption of this innovative technology, accompanied by practical recommendations to surmount these challenges. This comprehensive analysis is expected to attract considerable interest from stakeholders within the hydrogen production domain, fostering substantial engagement.

A mini review on microwave and contemporary based biohydrogen production technologies: a comparison

Hydrogen gas, along with conventional fossil fuels, has been used as a green fuel with enormous potential. Due to the rapid depletion of fossil fuels, a new dimension of hydrogen production technology has arrived to reduce reliance on nonrenewable energy sources. Microwave-based hydrogen production is a more promising and cost-effective technology than other existing green hydrogen production methods such as fermentation and gasification. Microwave heating may be superior to traditional heating due to several advantages such as less power consumption compared to other methods, higher yield, and a higher rate of conversion. Compared to another process for hydrogen production, the microwave-driven process worked efficiently at lower temperatures by providing more than 70% yield. The process of production can be optimized by using properly sized biomass, types of biomass, water flow, temperature, pressure, and reactor size. This method is the most suitable, attractive, and efficient technique for hydrogen production in the presence of a suitable catalyst. Hot spots formed by microwave irradiation would have a substantial impact on the yield and properties of microwave-processed goods. The current techno-economic situation of various technologies for hydrogen production is discussed here, with cost, efficiency, and durability being the most important factors to consider. The present review shows that a cost-competitive hydrogen economy will necessitate continual efforts to increase performance, scale-up, technical prospects, and political backing.

Enhanced biohydrogen yield and light conversion efficiency during photo-fermentation using immobilized photo-catalytic nano-particles

Bacterial immobilization is a common method in anaerobic fermentation, since of the maintenance of high bacterial activity, insurance of high density microbial during continuous fermentation, and quick adaptability to the environment. While, the bio-hydrogen production capacity of immobilized photosynthetic bacteria (I-PSB) is seriously affected by the low light transfer efficiency. Hence, in this study, photo-catalytic nano-particles (PNPs) was added into the photo-fermentative bio-hydrogen production (PFHP) system, and its enhancement effects of bio-hydrogen production performance were investigated. Results showed that the maximum cumulative hydrogen yield (CHY) of I-PSB with 100 mg/L nano-SnO₂ (154.33 ± 7.33 mL) addition was 18.54% and 33.06% higher than those of I-PSB without nano-SnO₂ addition and control group (free cells), and the lag time was the shortest indicating a shorter cell arrest time, more cells and faster response. Maximum energy recovery efficiency and light conversion efficiency were also found to be increased by 18.5% and 12.4%, respectively.

Genome-guided approaches and evaluation of the strategies to influence bioprocessing assisted morphological engineering of Streptomyces cell factories

Streptomyces genera serve as adaptable cell factories for secondary metabolites with various and distinctive chemical structures that are relevant to the pharmaceutical industry. Streptomyces' complex life cycle necessitated a variety of tactics to enhance metabolite production. Identification of metabolic pathways, secondary metabolite clusters, and their controls have all been accomplished using genomic methods. Besides this, bioprocess parameters were also optimized for the regulation of morphology. Kinase families were identified as key checkpoints in the metabolic manipulation (DivIVA, Scy, FilP, matAB, and AfsK) and morphology engineering of Streptomyces. This review illustrates the role of different physiological variables during fermentation in the bioeconomy coupled with genome-based molecular characterization of biomolecules responsible for secondary metabolite production at different developmental stages of the Streptomyces life cycle.

Advanced strategies for enhancing dark fermentative biohydrogen production from biowaste towards sustainable environment

As a clean energy carrier, hydrogen is a promising alternative to fossil fuel so as the global growing energy demand can be met. Currently, producing hydrogen from biowastes through fermentation has attracted much attention due to its multiple advantages of biowastes management and valuable energy generation. Nevertheless, conventional dark fermentation (DF) processes are still hindered by the low biohydrogen yields and challenges of biohydrogen purification, which limit their commercialization. In recent years, researchers have focused on various advanced strategies for enhancing biohydrogen yields, such as screening of super hydrogen-producing bacteria, genetic engineering, cell immobilization, nanomaterials utilization, bioreactors modification, and combination of different processes. This paper critically reviews by discussing the above stated technologies employed in DF, respectively, to improve biohydrogen generation and stating challenges and future perspectives on biowaste-based biohydrogen production.

Enhancing photo-fermentation biohydrogen production from corn stalk by iron ion

This study aimed to investigate the enhancement of iron ion on growth, metabolic pathway, and biohydrogen production performance of biohydrogen producing bacteria HAU-M1. Different concentrations of Fe²⁺ and Fe³⁺ were respectively added into fermentation broth of photo-fermentation biohydrogen production (PFHP) from corn stalk. Regular sampling test was used to measure the characteristics of fermentation broth and gas, metabolic pathway, energy conversion efficiency, and kinetic of PFHP. The analysis of experimental data showed that the maximum hydrogen yield of 70.25 mL/g was observed at 2500 μmol/L Fe²⁺ addition, with an energy conversion efficiency of 5.21%, which was 19.98% higher over no-addition. However, the maximum hydrogen content of 51.41% and the maximum hydrogen production rate of 17.82 mL/h were observed at 2000 μmol/L Fe²⁺ addition. The experimental results revealed that iron ion played a key role in PFHP, which provided a technical support for improving the performance of PFHP.

Biohydrogen from organic wastes as a clean and environment-friendly energy source: Production pathways, feedstock types, and future prospects

Microbial fermentation of organic matter under anaerobic conditions is currently the prominent pathway for biohydrogen production. Organic matter present in waste residues is regarded as an economic feedstock for biohydrogen production by dark and photo fermentative bacteria. Agricultural residues, fruit wastes, vegetable wastes, industrial wastewaters, and other livestock residues are some of the organic wastes most commonly used for biohydrogen production due to their higher organic content and biodegradability. Appropriate pretreatments are required to enhance the performance of biohydrogen from complex organic wastes. Biohydrogen production could also be enhanced by optimizing operation conditions and the addition of essential nutrients and nanoparticles. This review describes the pathways of biohydrogen production, discusses the effect of organic waste sources used and microbes involved on biohydrogen production, along with addressing the key parameters, advantages, and difficulties in each biohydrogen production pathway.

Biofuels and biorefineries: Development, application and future perspectives emphasizing the environmental and economic aspects

The fossil fuel utilization adversely affected the environmental health due to the rising emission levels of greenhouse gases. Consequently, the challenges of climate change loaded great stress on renewable energy sources. It is noted that extreme consumption of fossil fuels increased the earth temperature by 1.9 °C that adversely influenced the life and biodiversity. Biorefinery is the sustainable process for the production of biofuels and other bio-products from biomass feedstock using different conversion technologies. Biofuel is an important component of renewable energy sources contributing to overall carbon-neutral energy system. Studies reported that on global scale, over 90% of petroleum goods could be produced from renewable resources by 2023, whereas, 33% chemicals, and 50% of the pharmaceutical market share is also expected to be bio-based. This study details the brief review of operation, development, application, limitations, future perspectives, circular bioeconomy, and life cycle assessment of biorefinery. The economic and environmental aspects of biofuels and biorefineries are briefly discussed. Lastly, considering the present challenges, the future perspectives of biofuels and biorefineries are highlighted.

Photoautotrophs-Bacteria Co-Cultures: Advances, Challenges and Applications

Photosynthetic microorganisms are among the fundamental living organisms exploited for millennia in many industrial applications, including the food chain, thanks to their adaptable behavior and intrinsic proprieties. The great multipotency of these photoautotroph microorganisms has been described through their attitude to become biofarm for the production of value-added compounds to develop functional foods and personalized drugs. Furthermore, such biological systems demonstrated their potential for green energy production (e.g., biofuel and green nanomaterials). In particular, the exploitation of photoautotrophs represents a concrete biorefinery system toward sustainability, currently a highly sought-after concept at the industrial level and for the environmental protection. However, technical and economic issues have been highlighted in the literature, and in particular, challenges and limitations have been identified. In this context, a new perspective has been recently considered to offer solutions and advances for the biomanufacturing of photosynthetic materials: the co-culture of photoautotrophs and bacteria. The rational of this review is to describe the recently released information regarding this microbial consortium, analyzing the critical issues, the strengths and the next challenges to be faced for the intentions attainment.

A Review of Biohydrogen Productions from Lignocellulosic Precursor via Dark Fermentation: Perspective on Hydrolysate Composition and Electron-Equivalent Balance

This paper reviews the current technological development of bio-hydrogen (BioH2) generation, focusing on using lignocellulosic feedstock via dark fermentation (DF). Using the collected reference reports as the training data set, supervised machine learning via the constructed artificial neuron networks (ANNs) imbedded with feed backward propagation and one cross-out validation approach was deployed to establish correlations between the carbon sources (glucose and xylose) together with the inhibitors (acetate and other inhibitors, such as furfural and aromatic compounds), hydrogen yield (HY), and hydrogen evolution rate (HER) from reported works. Through the statistical analysis, the concentrations variations of glucose (F-value = 0.0027) and acetate (F-value = 0.0028) were found to be statistically significant among the investigated parameters to HY and HER. Manipulating the ratio of glucose to acetate at an optimal range (approximate in 14:1) will effectively improve the BioH2 generation (HY and HER) regardless of microbial strains inoculated. Comparative studies were also carried out on the evolutions of electron equivalent balances using lignocellulosic biomass as substrates for BioH2 production across different reported works. The larger electron sinks in the acetate is found to be appreciably related to the higher HY and HER. To maintain a relative higher level of the BioH2 production, the biosynthesis needs to be kept over 30% in batch cultivation, while the biosynthesis can be kept at a low level (2%) in the continuous operation among the investigated reports. Among available solutions for the enhancement of BioH2 production, the selection of microbial strains with higher capacity in hydrogen productions is still one of the most phenomenal approaches in enhancing BioH2 production. Other process intensifications using continuous operation compounded with synergistic chemical additions could deliver additional enhancement for BioH2 productions during dark fermentation.

Rhodotorula toruloides Single Cell Oil Production Using Eucalyptus urograndis Hemicellulose Hydrolysate as a Carbon Source

Microbial oil is a potential substitute for vegetable oils in the biodiesel industry. Efforts to obtain cheap carbon sources for the cultivation of lipid-producing microorganisms comprise an active research area. This work aimed to extract the hemicellulose fraction from Eucalyptus uograndis and to use its hydrolysate as a carbon source for Rhodotorula toruloides (an oleaginous yeast) cultivation for microbial oil production. Hemicellulose hydrothermal extractions were performed at different temperatures, times, and ratios of solid to liquid (S/L). Temperature and time showed a stronger effect on the solubilization of hemicellulose. Hemicellulose extraction at 155 °C, 195 min, and an S/L ratio of 1/2 resulted in a hydrolysate with a xylose content of 37.0 g/l. R. toruloides cultivation in this hydrolysate showed that initial pH had a strong influence on cell growth. At an initial pH of 6.2, cells grew to 6.0 g/l of biomass with a lipid content of 50%. Therefore, we believe that E. urograndis hemicellulose hydrolysate could be a potential substrate for R. toruloides for lipid production based on the biorefinery concept.

Biohythane production from food processing wastes - Challenges and perspectives

The food industry generates enormous quantity of food waste (FW) either directly or indirectly including the processing sector, which turned into biofuels for waste remediation. Six types of food processing wastes (FPW) such as oil, fruit and vegetable, dairy, brewery, livestock and finally agriculture based materials that get treated via dark fermentation/anaerobic digestion has been discussed. Production of both hydrogen and methane is daunting for oil, fruit and vegetable processing wastes because of the presence of polyphenols and essential oils. Moreover, acidic pH and high protein are the reasons for increased concentration of ammonia and accumulation of volatile fatty acids in FPW, especially in dairy, brewery, and livestock waste streams. Moreover, the review brought to forefront the enhancing methods, (pretreatment and co-digestion) operational, and environmental parameters that can influence the production of biohythane. Finally, the nature of feedstock's role in achieving successful circular bio economy is also highlighted.

Industrial wastewater to biohydrogen: Possibilities towards successful biorefinery route

The aim of this review is to summarize the modern developments and enhancement strategies reported for improving the biorefinery route of industrial wastewater to biohydrogen. Recent developments towards biohydrogen production chiefly involves culture enrichment, pretreatment of biocatalysts, co culture fermentation, metabolic and genetic engineering, ecobiotechnological approaches and the coupling process of biohydrogen. In addition, an overview of dark fermentation, pathways involved, microbes involved in biohydrogen production, industrial wastewater as substrate have been focused. The utilization of organic residuals of dark fermentation for subsequent value added products are highlighted. More apparently, the two stage coupling process and its possibilities towards biorefinery has been reviewed comprehensively. Moreover, comparative energy and economic aspects of biohydrogen production from industrial wastewater and its prospects towards pilot scale applications are also spotlighted. Though all the enhancement strategies have both benefits and disadvantages, coupling process is considered as the most successful biorefinery route for biohydrogen production.