Pyrolysis synergy of municipal solid waste (MSW): A review

Mass scale synthesis of graphene nanosheets using waste cardboard for application in perovskite solar cells and supercapacitors

Advanced graphene-based materials have been proficiently incorporated into next-generation solar cells and supercapacitors because of their high electrical conductivity, large surface area, excellent charge-transport ability, and exceptional optical properties. Herein, we report the synthesis of graphene nanosheets (GNs) from waste cardboard via pyrolysis, with ethyl alcohol as the growth initiator. Additionally, we demonstrated the use of GNs in energy conversion and storage applications. Using the GN electrode in perovskite solar cells resulted in an excellent power conversion efficiency of ∼10.41 % for an active area of 1 cm2, indicating an enhancement of approximately 27 % compared to conventional electrodes. Furthermore, the GNs were used as active electrode materials in supercapacitors with excellent electrochemical performance and a high gravimetric specific capacitance of 167.5 F/g at a scan rate of 2 mV/s. The developed GNs can be efficiently used for energy storage, conversion, and electrochemical sensing applications.

Effective stabilization of heavy metals in solid waste and sludge pyrolysis using intercalated-exfoliated modified vermiculite: Experiment and simulation study

Pyrolysis is effective in reducing the volume of solid waste and sludge, and produces less pollutants than incineration and landfill, but the process still suffers from heavy metal pollution. Four types of intercalated-exfoliated modified vermiculite (UIV, DIV, TIV and 3IV) were prepared using urea, dimethylsulfoxide, tributyl phosphate and 3-aminopropyltriethoxysilane as intercalators for the control of Cd, Cr, Cu, Pb and Zn in municipal sewage sludge (MSL), paper mill sludge (PML), municipal domestic waste (MWA) and aged refuse (AFE). The larger the interlayer spacing of the vermiculite, the more favorable the retention of heavy metals. 3IV was the most effective additive, with an average retention of more than 75 % of all heavy metals at 450 ℃ for the four raw materials. Cr, Cu, Pb and Zn were all at low potential ecological risk (Pr), while Cd was moderate or considerable Pr, and the addition of 3IV reduced the Pr. Distribution of intercalators between vermiculite interlayers was haphazard, and interlayer spacing results were close to those of the experiment (except for tributyl phosphate). The reactive electrons mainly flowed from the Highest Occupied Molecular Orbital (HOMO) of vermiculite flakes to the Lower Unoccupied Molecular Orbital (LUMO) of heavy metal chlorides. In contrast, the reactive electrons mostly flowed from the HOMO of heavy metal oxides to the LUMO of vermiculite flakes. Heavy metal oxides were more readily adsorbed on vermiculite flakes than heavy metal chlorides, and the adsorption capacity of Cr and Zn was stronger than that of Cd, Pb and Cu.

Tackling municipal solid waste crisis in India: Insights into cutting-edge technologies and risk assessment

Municipal Solid Waste (MSW) management is a pressing global concern, with increasing interest in Waste-to-Energy Technologies (WTE-T) to divert waste from landfills. However, WTE-T adoption is hindered by financial uncertainties. The economic benefits of MSW treatment and energy generation must be balanced against environmental impact. Integrating cutting-edge technologies like Artificial Intelligence (AI) can enhance MSW management strategies and facilitate WTE-T adoption. This review paper explores waste classification, generation, and disposal methods, emphasizing public awareness to reduce waste. It discusses AI's role in waste management, including route optimization, waste composition forecasting, and process parameter optimization for energy generation. Various energy production techniques from MSW, such as high-solids anaerobic digestion, torrefaction, plasma pyrolysis, incineration, gasification, biodegradation, and hydrothermal carbonization, are examined for their advantages and challenges. The paper emphasizes risk assessment in MSW management, covering chemical, mechanical, biological, and health-related risks, aiming to identify and mitigate potential adverse effects. Electronic waste (E-waste) impact on human health and the environment is thoroughly discussed, highlighting the release of hazardous substances and their contribution to air, soil, and water pollution. The paper advocates for circular economy (CE) principles and waste-to-energy solutions to achieve sustainable waste management. It also addresses complexities and constraints faced by developing nations and proposes strategies to overcome them. In conclusion, this comprehensive review underscores the importance of risk assessment, the potential of AI and waste-to-energy solutions, and the need for sustainable waste management to safeguard public health and the environment.

Pyrolysis of municipal plastic waste: Chlorine distribution and formation of organic chlorinated compounds

The release of chlorine during the pyrolysis of actual municipal plastic waste (MPW) was studied. Firstly, thermogravimetry-Fourier transform infrared (TG-FTIR) was analyzed to investigate the chlorine release behavior. Then, the effect of temperature on chlorine migrations was investigated by fast pyrolysis experiments in a fixed bed reactor. Results showed that chlorine released mainly between 241 and 353 °C in the form of HCl or chloroesters during MPW pyrolysis. After pyrolysis, chlorine was mainly distributed in the pyrolytic gas (74.34-82.89 %) and char (10.17-21.29 %). However, the release of chlorine was inhibited due to the melting behavior of MPW at <350 °C. Besides, the relative contents and types of organic chlorinated compounds in liquid products were both decreased with temperature. It was observed that polyethylene terephthalate (PET) was the greatest contributor to the formation of organic chlorinated compounds during MPW pyrolysis. Meanwhile, the pyrolysis of PET was significantly promoted by the HCl released from polyvinyl chloride (PVC). Subsequently, the pathways for the formation of organic chlorinated compounds through the co-pyrolysis of PVC and PET were proposed, including the initial degradation and subsequent chlorination of PET. These findings provided new insights into the release and regulation of chlorine-containing pollutants during actual MPW pyrolysis.

Gasification of biomass for syngas production: Research update and stoichiometry diagram presentation

Gasification is a thermal process that converts organic materials into syngas, bio-oil, and solid residues. This mini-review provides an update on current research on producing high-quality syngas from biomass via gasification. Specifically, the review highlights the effective valorization of feedstocks, the development of novel catalysts for reforming reactions, the configuration of novel integrated gasification processes with an assisted field, and the proposal of advanced modeling tools, including the use of machine learning strategies for process design and optimization. The review also includes examples of using a stoichiometry diagram to describe biomass gasification. The research efforts in this area are constantly evolving, and this review provides an up-to-date overview of the most recent advances and prospects for future research. The proposed advancements in gasification technology have the potential to significantly contribute to sustainable energy production and reduce greenhouse gas emissions.

Numerical simulation to optimize passive aeration strategy for semi-aerobic landfill

Passive aeration has been proven to be efficient for oxygen supply in landfill. The combination of passive aeration and semi-aerobic landfill offers a cost-effective and energy-efficient approach to solid waste (SW) treatment. However, determining the optimal strategy for this combination has remained unclear. This study aimed to investigate the strategy of passive aeration in a semi-aerobic landfill using numerical simulation methods. A model coupled hydrodynamic model and compartment model for degradation of SW was implemented. The accuracy was well validated by comparing measured and simulated results in a pilot-scale landfill. Compared with natural convection, passive aeration by funnel caps could increase air input by 20 %. By simulating volumetric fraction distribution of CO2, CH4 and O2 in landfill, an orthogonal experiment including 4 factors was designed to identify that the diameter of tubes (DT), the spacing between tubes (ST) and the landfill depth (LD) have substantial impacts on aerobic zone ratio (AZR) of landfill. But the diameter of gas ports (DGP) has an indiscernible effect. The optimized factors were determined to be as follows: DT = 0.3 m, ST = 15.0 m, DGP = 0.05 m, and LD = 4.0 m, under which the semi-aerobic landfill could enhance SW degradation. Large diameter and spacing of tubes are favorable to improve the AZR at the top of the landfill, and the aerobic zone mainly exists near the ventilation tubes. These findings contribute to the development of more efficient and sustainable solid waste treatment strategies in semi-aerobic landfill.

Co-pyrolysis of textile dyeing sludge/litchi shell and CaO: Immobilization of heavy metals and the analysis of the mechanism

To relieve the secondary contamination of heavy metals (HMs), the synergistic effect of co-pyrolysis of textile dyeing sludge (DS)/litchi shell (LS) and CaO on the migration of HMs was demonstrated in this study. The proportions of Cu, Zn, Cr, Mn, and Ni in the F4 fraction increased to 75%, 55%, 100%, 50%, and 62% at the suitable CaO dosages. When 10% CaO was added, the RI value of DLC-10% was reduced to 7.89, indicating low environmental risk. The characterizations of the physicochemical properties of biochar provided support for the HMs immobilization mechanism. HMs combined with inorganic minerals or functional groups to form new stable HMs crystalline minerals and complexes to achieve immobilization of HMs. The pH value and pore structure also play an important role in improving the immobilization performance of HMs. In conclusion, the results provided a new direction for the subsequent harmless treatment of HMs-enriched waste.

A strategic review on sustainable approaches in municipal solid waste management andenergy recovery: Role of artificial intelligence,economic stability andlife cycle assessment

The consumption of energy levels has increased in association with economic growth and concurrently increased the energy demand from renewable sources. The need under Sustainable Development Goals (SDG) intends to explore various technological advancements for the utilization of waste to energy. Municipal Solid Waste (MSW) has been reported as constructive feedstock to produce biofuels, biofuel carriers and biochemicals using energy-efficient technologies in risk freeways. The present review contemplates risk assessment and challenges in sorting and transportation of MSW and different aspects of conversion of MSW into energy are critically analysed. The circular bioeconomy of energy production strategies and management of waste are also analysed. The current scenario on MSW and its impacts on the environment are elucidated in conjunction with various policies and amendments equipped for the competent management of MSW in order to fabricate a sustained environment.

Release of soluble ions and heavy metal during fly ash washing by deionized water and sodium carbonate solution

Two municipal solid waste incineration fly ashes were selected for washing by deionized water and Na₂CO₃ solution for comparison. Results showed that the benefits of washing were two folds: (1) Washing was able to reduce the contents of Cl^- and SO₄^2- while increased the contents of CaO, SiO₂, Al₂O₃ etc.; (2) Washing by Na₂CO₃ solution showed increased stability of heavy metals (Cr, Ni, Cd, Cu, Zn and Pb) and fly ash was safe for later reuse. Release of Cl^- was high at more than 90% regardless of washing solution. SO₄^2- and Ca²⁺ removal was highly dependent on the dissolution and precipitation equilibriums. Na₂CO₃ washing promoted the formation of CaCO₃. Thus SO₄^2- was washed off instead of precipitating as CaSO₄ and retained in fly ash solid. SO₄^2- removal was raised to more than 80% by Na₂CO₃ washing as compared with about 30% by deionized water. At the same time, Ca removal by Na₂CO₃ dropped to 1-2%. In addition, the basicity of fly ash was important as high basicity helped SO₄^2- removal. Overall, washing by Na₂CO₃ appears to be a promising option for fly ash treatment.

Assessing the influence of sewage sludge and derived-biochar in immobilization and transformation of heavy metals in polluted soil: Impact on intracellular free radical formation in maize

As one of the most common ways to get rid of municipal waste, landfill leachate, waste with complicated compositions and high levels of contaminants, has become a significant threat to the world's environment. Here, the impact of sewage sludge (SS) and derived-biochar (SSB) amendments on the immobilization and potential mobility of heavy metals in a contaminated soil-plant system was investigated. The sequential fractionation findings showed that using SS-2%, SSB-2%, and SSBC-1% reduced the potential mobility of heavy metals while increasing the residual fraction in polluted soils. The translocation and bioconcentration factors showed that heavy metals were slightly transferred into shoots from roots and lowered accumulation in roots from contaminated soils. Fourier transform infrared (FTIR) and X-ray photoelectron spectrum (XPS) comprehensive characterization results indicated the significant role of applied amendments for heavy metals transformation from the exchangeable-soluble fractions to the least available form by lowering their mobility to confirm the adsorption-based complexes, which results in the surface adsorption of heavy metals with functional groups. The electron paramagnetic resonance (EPR) results indicated the dominance of reactive oxygen species (ROS) in the intracellular formation of hydroxyl radicals (•OH) in maize plant roots and shoots. ROS (•OH) generation plays a critical influence in the interaction between the physiological processes of plants and heavy metals. Moreover, all the amendments increased maize growth and biomass production. Our study suggests that alone and combined application of SS and SSB have great potential to remediate heavy metals contaminated soil for environmental sustainability.

Resource utilization of tannery sludge to prepare biochar as persulfate activators for highly efficient degradation of tetracycline

In this work, a low-cost carbon-based catalyst (TSBC) was prepared by the facile one-pot pyrolysis of tannery sludge (TS) and used to activate persulfate (PS) for tetracycline (TC) removal. The results showed that TSBC-500 exhibited optimal physicochemical properties and the best performance for PS activation to remove TC from drinking water. Approximately 99.1% of TC was removed in the TSBC-500/PS system, which was considerably higher than those in the TSBC-500 adsorption and pure PS systems. Radical quenching experiments indicated that •OH and SO₄•^- played major roles in the TC removal in the TSBC-500/PS system. In addition, transition metals, functional groups, and the high degree of carbon structural defects were beneficial for PS activation to degrade TC. This study not only newly contributes to high-value utilization of TS as a PS activator but also offers an efficient method for the removal of organic pollutants.

Production and Analysis of the Physicochemical Properties of the Pyrolytic Oil Obtained from Pyrolysis of Different Thermoplastics and Plastic Mixtures

The constant search for the proper management of non-degradable waste in conjunction with the circular economy makes the thermal pyrolysis of plastics an important technique for obtaining products with industrial interest. The present study aims to produce pyrolytic oil from thermoplastics and their different mixtures in order to determine the best performance between these and different mixtures, as well as to characterize the liquid fraction obtained to analyze its use based on said properties. This was carried out in a batch type reactor at a temperature of 400 °C for both individual plastics and their mixtures, from which the yields of the different fractions are obtained. The liquid fraction of interest is characterized by gas chromatography and its properties are characterized by ASTM standards. The product of the pyrolysis of mixtures of 75% polystyrene and 25% polypropylene presents a yield of 82%, being the highest, with a viscosity of 1.12 cSt and a calorific power of 42.5 MJ/kg, which has a composition of compounds of carbon chains ranging between C6 and C20, for which it is proposed as a good additive agent to conventional fuels for industrial use.

Pyrolysis characteristics of biodried products derived from municipal organic wastes: Synergistic effect of bulking agents and modification of biodegradation

Derived from the biodrying of municipal organic wastes (MOWs), biodried products (BPs) are widely identified as renewable energy sources. In this study, for efficient energy recovery, the pyrolysis characteristics of BPs were investigated by comprehensive kinetic analysis, with special focus on the synergistic effect of bulking agents and the influence of biodegradation. Compared with theoretical raw materials (RMs), it was suggested that the synergistic effect of organics and lignocelluloses in RMs promoted decomposition in Stage 1 (400-570 K), especially for the pyrolysis of RM using sawdust, during which the positive effect achieved decomposition in advance with lower overlap ratio (0.9264) and ΔW (-9.50% at 619.0 K) values. Furthermore, compared with RMs, it was indicated that the kinetic indices (E_a and ln A values) of the BPs were upward in Stage 1 and decreased in Stage 2 due to biodegradation. The results of ΔH, ΔG and ΔS indicated that BP pyrolysis required more heat supply as the reaction progressed but formed a more organized activated complex. In addition, biodegradation observably decreased the generation of gas products and typical functional groups of volatiles during BP pyrolysis, such as CO₂ and CO, which presented decreasing ratios of 32.18-42.47% and 30.25-46.47%, respectively. In general, the pyrolysis of BPs was intensified by bulking agents and modified by biodegradation.

State-of-the-art of the pyrolysis and co-pyrolysis of food waste: Progress and challenges

The continuous growth of population and the steady improvement of people's living standards have accelerated the generation of massive food waste. Untreated food waste has great potential to harm the environment and human health due to bad odor release, bacterial leaching, and virus transmission. However, the application of traditional disposal techniques like composting, landfilling, animal feeding, and anaerobic digestion are difficult to ease the environmental burdens because of problems such as large land occupation, virus transmission, hazardous gas emissions, and poor efficiency. Pyrolysis is a practical and promising route to reduce the environmental burden by converting food waste into bioenergy. This paper aims to analyze the characteristics of food waste, introduce the production of biofuels from conventional and advanced pyrolysis of food waste, and provide a basis for scientific disposal and sustainable management of food waste. The review shows that co-pyrolysis and catalytic pyrolysis significantly impact the pyrolysis process and product characteristics. The addition of tire waste promotes the synthesis of hydrocarbons and inhibits the formation of oxygenated compounds efficiently. The application of calcium oxide (CaO) exhibits good performance in the increment of bio-oil yield and hydrocarbon content. Based on this literature review, pyrolysis can be considered as the optimal technique for dealing with food waste and producing valuable products.

Physiochemical properties, heavy metal leaching characteristics and reutilization evaluations of solid ashes from municipal solid waste incinerator plants

A clear understanding of the physicochemical, compositional, morphological properties and heavy metal leaching behaviours of municipal solid waste (MSW) incinerated fly ash (FA) and bottom ash (BA) are essential to guide their respective re-utilizations. In this study, FA and BA collected from three MSW incinerator plants located in Xiamen were systematically exploited. Results indicated that FA in the three plants exhibited more porous structures than BA, and the particle sizes of FA and BA were 45-295 μm and >3000 μm, respectively. However, both ashes showed similar main mineralogical crystalline phases of Ca(OH)₂, CaCO₃ and SiO₂, indicative of high feasibilities in manufacturing cement, bricks or construction materials. Additionally, the heavy metal migration of MSW into leachate, flue gas, FA and BA were all specifically measured in this study to provide full data analyses and in-depth understandings of heavy metal migrations, manifesting that the heavy metals of MSW majorly migrated into the FA and BA with clearly discrepant metal ratios and only a very small fraction migrated into the leachate and flue gas. To maximumly reuse both FA and BA, importantly, the green degree and cost-benefit analysis methods were integrated into this study to evaluate their re-utilization alternatives on environmental impacts and economic benefits, and results implied that FA was beneficial for re-utilizing as aggregates in bricks while BA was optimum as paving materials. This study provides overall systematic perspectives on guiding the re-utilization of FA/BA from the MSW incinerators and also considers their environmental and economic benefits for future long-term management.

Gasification of municipal solid waste (MSW) as a cleaner final disposal route: A mini-review

The production of hydrogen-rich syngas from municipal solid waste (MSW) by pyrolysis/gasification is one of the most promising waste-to-energy pathways for realizing a circular bioeconomy. This mini-review provides an overview of current research and development efforts in the field, focusing on the development of syngas upgrades and novel gasification processes, with the ultimate goal of making MSW gasification a sustainable and affordable route for the final disposal of MSW. A graphical assessment protocol is proposed to support comprehension of the main reactions that are involved in the MSW gasification. MSW gasification studies are reviewed with the prospects considered to provide a reference for future work.

Source separation, transportation, pretreatment, and valorization of municipal solid waste: a critical review

Waste sorting is an effective means of enhancing resource or energy recovery from municipal solid waste (MSW). Waste sorting management system is not limited to source separation, but also involves at least three stages, i.e., collection and transportation (C&T), pretreatment, and resource utilization. This review focuses on the whole process of MSW management strategy based on the waste sorting perspective. Firstly, as the sources of MSW play an essential role in the means of subsequent valorization, the factors affecting the generation of MSW and its prediction methods are introduced. Secondly, a detailed comparison of approaches to source separation across countries is presented. Constructing a top-down management system and incentivizing or constraining residents' sorting behavior from the bottom up is believed to be a practical approach to promote source separation. Then, the current state of C&T techniques and its network optimization are reviewed, facilitated by artificial intelligence (AI) and the Internet of Things technologies. Furthermore, the advances in pretreatment strategies for enhanced sorting and resource recovery are introduced briefly. Finally, appropriate methods to valorize different MSW are proposed. It is worth noting that new technologies, such as AI, show high application potential in waste management. The sharing of (intermediate) products or energy of varying processing units will inject vitality into the waste management network and achieve sustainable development.

Fast hydropyrolysis of biomass Conversion: A comparative review

Recent studies show that fast hydropyrolysis (i.e., pyrolysis under hydrogen atmosphere operating at a rapid heating rate) is a promising technology for the conversion of biomass into liquid fuels (e.g., bio-oil and C₄₊ hydrocarbons). This pyrolysis approach is reported to be more effective than conventional fast pyrolysis in producing aromatic hydrocarbons and also lowering the oxygen content of the bio-oil obtained compared to hydrodeoxygenation (a common bio-oil upgrading method). Based on current literature, various non-catalytic and catalytic fast hydropyrolysis processes are reviewed and discussed. Efforts to combine fast hydropyrolysis and hydrotreatment process are also highlighted. Points to be considered for future research into fast hydropyrolysis and pending challenges are also discussed.

Recent advances in valorization of organic municipal waste into energy using biorefinery approach, environment and economic analysis

Researcher's all around works on a copious technique to lessen waste production and superintend the waste management for long-term socio-economic and environmental benefits. Value-added products can be produced from municipal waste by using holistic and integrated approaches. In this review, a detail about the superiority of the different methods like anaerobic digestion, biofuel production, incineration, pyrolysis and gasification were used for the conversion of municipal waste to feedstock for alternate energy and its economic- environmental impacts were consolidated. Most conversion techniques were environmentally friendly to manage municipal waste. The biological process was more economically feasible compare to the thermal process, for the reason thermal process required a large amount of capital investment and energy utilization. In the thermal process, gasification shows low emission, and pyrolysis shows low capital investment and economically feasible compare to other thermal processes. Waste to energy technology significantly reduced the emission and energy demand.

Sustainable blueberry waste recycling towards biorefinery strategy and circular bioeconomy: A review

Waste valorization using biological methods for value addition as well as environmental management is becoming popular approach for sustainable development. The present review addresses the availability of blueberry crop residues (BCR), applications of this feedstock in bioprocess for obtaining range of value-added products, to offer economic viability, business development and market potential, challenges and future perspectives. To the best of our knowledge, this is the first article addressing the blueberry waste valorization for a sustainable circular bioeconomy. Furthermore, it covers the information on the alternative BCR valorization methods and production of biochar for environmental management through removal or mitigation of organic and inorganic pollutants from contaminated sites. The review also discusses the ample opportunities of strategic utilization of BCR to offer solutions for environmental sustenance, covers the emerging trends to produce multi-products and techno-economic prospective for sustainable agronomy.

Valorisation of medical waste through pyrolysis for a cleaner environment: Progress and challenges

The COVID-19 pandemic has exerted great shocks and challenges to the environment, society and economy. Simultaneously, an intractable issue appeared: a considerable number of hazardous medical wastes have been generated from the hospitals, clinics, and other health care facilities, constituting a serious threat to public health and environmental sustainability without proper management. Traditional disposal methods like incineration, landfill and autoclaving are unable to reduce environmental burden due to the issues such as toxic gas release, large land occupation, and unsustainability. While the application of clean and safe pyrolysis technology on the medical wastes treatment to produce high-grade bioproducts has the potential to alleviate the situation. Besides, medical wastes are excellent and ideal raw materials, which possess high hydrogen, carbon content and heating value. Consequently, pyrolysis of medical wastes can deal with wastes and generate valuable products like bio-oil and biochar. Consequently, this paper presents a critical and comprehensive review of the pyrolysis of medical wastes. It demonstrates the feasibility of pyrolysis, which mainly includes pyrolysis characteristics, product properties, related problems, the prospects and future challenges of pyrolysis of medical wastes.

Insights into the stabilization of landfill by assessing the diversity and dynamic succession of bacterial community and its associated bio-metabolic process

The distribution of bacterial community in an actual landfill was analyzed and the bioprocess involved in refuse degradation was clarified. The results showed that the degradation degree of refuse showed great differences with the landfill age, in which the contents of organic matter (OM) and total Kjeldahl nitrogen (TKN) in refuse as well as the chemical oxygen demand (COD) in leachate presented decreasing trends with increasing landfill age. The diversity of bacterial community increased first and then decreased with increasing landfill age. The main bacterial phyla involved in refuse degradation were Proteobacteria, Firmicutes and Bacteroidetes, among which, Proteobacteria had an absolute advantage with a relative abundance ranging of 66-78%. With increasing landfill age, the abundance of Firmicutes decreased gradually, while that of Bacteroidetes increased. Pseudomonas, Thiopseudomonas, Psychrobacter and Desemzia were the main genera. The distribution of bacterial community in samples with landfill ages of 0-1 and 1-3 years were greatly influenced by TKN and pH, respectively. Amino acid and carbohydrate metabolism were the main biological pathways according to the Kyoto Encyclopedia of Genes and Genomes (KEGG) database, and the biodegradation of xenobiotics as well as terpenoids and polyketides also accounted relatively high frequencies in the landfill. These results provide a better understanding of landfill microbiology and bioprocesses for landfill stabilization.

Biowaste-to-bioplastic (polyhydroxyalkanoates): Conversion technologies, strategies, challenges, and perspective

Biowaste management is a challenging job as it is high in nutrient content and its disposal in open may cause a serious environmental and health risk. Traditional technologies such as landfill, bio-composting, and incineration are used for biowaste management. To gain revenue from biowaste researchers around the world focusing on the integration of biowaste management with other commercial products such as volatile fatty acids (VFA), biohydrogen, and bioplastic (polyhydroxyalkanoates (PHA)), etc. PHA production from various biowastes such as lignocellulosic biomass, municipal waste, waste cooking oils, biodiesel industry waste, and syngas has been reported successfully. Various nutrient factors i.e., carbon and nitrogen source concentration and availability of dissolved oxygen are crucial factors for PHA production. This review is an attempt to summarize the recent advancements in PHA production from various biowaste, its downstream processing, and other challenges that need to overcome making bioplastic an alternate for synthetic plastic.