1
|
Unraveling the shift in bacterial communities profile grown in sediments co-contaminated with chlorolignin waste of pulp-paper mill by metagenomics approach. Front Microbiol 2024; 15:1350164. [PMID: 38529176 PMCID: PMC10961449 DOI: 10.3389/fmicb.2024.1350164] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2023] [Accepted: 02/21/2024] [Indexed: 03/27/2024] Open
Abstract
Pulp-paper mills (PPMs) are known for consistently generating a wide variety of pollutants, that are often unidentified and highly resistant to environmental degradation. The current study aims to investigate the changes in the indigenous bacterial communities profile grown in the sediment co-contaminated with organic and inorganic pollutants discharged from the PPMs. The two sediment samples, designated PPS-1 and PPS-2, were collected from two different sites. Physico-chemical characterization of PPS-1 and PPS-2 revealed the presence of heavy metals (mg kg-1) like Cu (0.009-0.01), Ni (0.005-0.002), Mn (0.078-0.056), Cr (0.015-0.009), Pb (0.008-0.006), Zn (0.225-0.086), Fe (2.124-0.764), Al (3.477-22.277), and Ti (99.792-45.012) along with high content of chlorophenol, and lignin. The comparative analysis of organic pollutants in sediment samples using gas chromatography-mass spectrometry (GC-MS) revealed the presence of major highly refractory compounds, such as stigmasterol, β-sitosterol, hexadecanoic acid, octadecanoic acid; 2,4-di-tert-butylphenol; heptacosane; dimethyl phthalate; hexachlorobenzene; 1-decanol,2-hexyl; furane 2,5-dimethyl, etc in sediment samples which are reported as a potential toxic compounds. Simultaneously, high-throughput sequencing targeting the V3-V4 hypervariable region of the 16S rRNA genes, resulted in the identification of 1,249 and 1,345 operational taxonomic units (OTUs) derived from a total of 115,665 and 119,386 sequences read, in PPS-1 and PPS-2, respectively. Analysis of rarefaction curves indicated a diversity in OTU abundance between PPS-1 (1,249 OTUs) and PPS-2 (1,345 OTUs). Furthermore, taxonomic assignment of metagenomics sequence data showed that Proteobacteria (55.40%; 56.30%), Bacteoidetes (11.30%; 12.20%), and Planctomycetes (5.40%; 4.70%) were the most abundant phyla; Alphproteobacteria (20.50%; 23.50%), Betaproteobacteria (16.00%; 12.30%), and Gammaproteobacteria were the most recorded classes in PPS-1 and PPS-2, respectively. At the genus level, Thiobacillus (7.60%; 4.50%) was the most abundant genera grown in sediment samples. The results indicate significant differences in both the diversity and relative abundance of taxa in the bacterial communities associated with PPS-2 when compared to PPS-1. This study unveils key insights into contaminant characteristics and shifts in bacterial communities within contaminated environments. It highlights the potential for developing efficient bioremediation techniques to restore ecological balance in pulp-paper mill waste-polluted areas, stressing the importance of identifying a significant percentage of unclassified genera and species to explore novel genes.
Collapse
|
2
|
Screening and signifying the uranium remediation level of Alternanthera philoxeroides and Eichhornia crassipes from aquatic medium. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 342:123063. [PMID: 38043767 DOI: 10.1016/j.envpol.2023.123063] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/18/2023] [Revised: 11/15/2023] [Accepted: 11/27/2023] [Indexed: 12/05/2023]
Abstract
Uranium is causing a hazardous impact on the human population throughout the globe. Different methods of remediation have been documented but the approach of phytoremediation has been praised throughout the globe. The bioaccumulation of uranium especially as a hyper-accumulator, has been documented in limited plant species. Therefore the current studies were conducted to elaborate on the overall U accumulation, biochemical and photochemical reactions in Alternanthera philoxeroides and Eichhornia crassipes to different concentrations of Uranium. The results showed that the accumulation of U in A.philoxeroides is higher; followed by E.crassipes; with maximum amounts of roots accumulation. Overall A.philoxeroides and E.crassipes accumulate as much as 948.88 mg/kg and 801.87 mg/kg on a dry weight basis. The biochemical results showed that Superoxide dismutase (SOD) decreased in the leaves and stem of A.philoxeroides; whereas an increase has been seen in E.crassipes in response to all treatments. peroxidase (POD) and Catalase (CAT) showed irregular response to all treatments; where the main increase was observed at T3 (120 μmol/L) and 72 h up to 138 μ/g-FW (POD) and 178 μ/g-FW (CAT) in A.philoxeroides and 1870 μ/g-FW (POD) and 73 μ/g-FW (CAT) in E.crassipes, respectively. The correlation coefficient between the fluorescence ratio Fv/Fm and the concentrations of U-treatment was significantly negative. It is concluded from the results that Uranium halted the biochemical and photochemical reaction but the plants resisted its impact while accumulating a good amount of uranium which is a good prospect for future interventions for the in-situ remediation of uranium-affected sites.
Collapse
|
3
|
Air nanobubble water improves plant uptake and tolerance toward cadmium in phytoremediation. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 337:122577. [PMID: 37722479 DOI: 10.1016/j.envpol.2023.122577] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/22/2023] [Revised: 09/12/2023] [Accepted: 09/16/2023] [Indexed: 09/20/2023]
Abstract
Heavy metal contamination continues to be a persistent environmental problem. To address this issue, this study evaluated the impact of air nanobubbles (NBs) in water on the uptake of heavy metals by Alternanthera philoxeroides (A. philoxeroides), a common aquatic plant in China known for its rapid growth, strong vitality, and high capacity for heavy metal remediation. This study found that diluted air NBs (25% concentration) boosted cadmium uptake of A. philoxeroides by 17.39%. They also enhanced plant growth (25-50%) and photosynthetic pigments (10-20%) even at low cadmium levels (0.1 mM). Furthermore, the incorporation of 25% air NBs has been demonstrated to significantly amplify the performance of key antioxidant enzymes, such as superoxide dismutase and catalase, alongside heightened levels of crucial antioxidants such as malondialdehyde. This heightened activity of antioxidant defenses offers a compelling explanation for the potential amelioration of cadmium toxicity and concurrent enhancements in overall plant growth rates. Notably, a comprehensive analysis utilizing the excitation emission matrix-parallel factor analysis (EEM-PARAFAC) technique has revealed alterations in the composition of rhizosphere dissolved organic matter due to the presence of NBs. This ncomposition change of the rhizosphere dissolved organic mattermposition has subsequently exerted an influence on plant complexation processes and the subsequent uptake of cadmium. This study demonstrates that the strategic implementation of air NBs in water systems holds the potential to significantly enhance the plant's ability to detoxify cadmium and improve the uptake of heavy metals during phytoremediation processes.
Collapse
|
4
|
A critical review on environmental risk and toxic hazards of refractory pollutants discharged in chlorolignin waste of pulp and paper mills and their remediation approaches for environmental safety. ENVIRONMENTAL RESEARCH 2023; 236:116728. [PMID: 37495063 DOI: 10.1016/j.envres.2023.116728] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/19/2023] [Revised: 07/01/2023] [Accepted: 07/22/2023] [Indexed: 07/28/2023]
Abstract
Agro-based pulp and paper mills (PPMs) inevitably produce numerous refractory pollutants in their wastewater, including chlorolignin, chlorophenols, chlorocatechols, chloroguaiacol, cyanide, furan, dioxins, and other organic compounds, as well as various heavy metals, such as nickel (Ni), zinc (Zn), chromium (Cr), iron (Fe), lead (Pb), arsenic (As), etc. These pollutants pose significant threats to aquatic and terrestrial life due to their cytogenotoxicity, mutagenicity, impact on sexual organs, hormonal interference, endocrine disruption, and allergenic response. Consequently, it is crucial to reclaim pulp paper mill wastewater (PPMW) with high loads of refractory pollutants through effective and environmentally sustainable practices to minimize the presence of these chemicals and ensure environmental safety. However, there is currently no comprehensive published review providing up-to-date knowledge on the fate of refractory pollutants from PPMW in soil and aquatic environments, along with valuable insights into the associated health hazards and remediation methods. This critical review aims to shed light on the potential adverse effects of refractory pollutants from PPMW on natural ecosystems and living organisms. It explores existing effective treatment technologies for remediating these pollutants from wastewater, highlighting the advantages and disadvantages of each approach, all in pursuit of environmental safety. Special emphasis is placed on emerging technologies used to decontaminate wastewater discharged from PPMs, ensuring the preservation of the environment. Additionally, this review addresses the major challenges and proposes future research directions for the proper disposal of PPMW. It serves as a comprehensive source of knowledge on the environmental toxicity and risks associated with refractory pollutants in PPMW, making it a valuable reference for policymakers and researchers when selecting appropriate technologies for remediation. The scientific community, concerned with mitigating the widespread risks posed by refractory pollutants from PPMs, is expected to take a keen interest in this review.
Collapse
|
5
|
Plants, animals, and fisheries waste-mediated bioremediation of contaminants of environmental and emerging concern (CEECs)-a circular bioresource utilization approach. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:84999-85045. [PMID: 37400699 DOI: 10.1007/s11356-023-28261-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/23/2022] [Accepted: 06/10/2023] [Indexed: 07/05/2023]
Abstract
The release of contaminants of environmental concern including heavy metals and metalloids, and contaminants of emerging concern including organic micropollutants from processing industries, pharmaceuticals, personal care, and anthropogenic sources, is a growing threat worldwide. Mitigating inorganic and organic contaminants, which can be coined as contaminants of environmental and emerging concern (CEECs), is a big challenge as traditional physicochemical processes are not economically viable for managing mixed contaminants of low concentrations. As a result, low-cost materials must be designed to provide high CEEC removal efficiency. One of the environmentally viable and energy-efficient approaches is biosorption, which involves using biomass or biopolymers isolated from plants or animals to decontaminate heavy metals in contaminated environments using inherent biological mechanisms. Among chemical constituents in plant biomass, cellulose, lignin, hemicellulose, proteins, polysaccharides, phenolic compounds, and animal biomass include polysaccharides and other compounds to bind heavy metals covalently and non-covalently. These functional groups include carboxyl, hydroxyl, carbonyl, amide, amine, and sulfhydryl. Cation-exchange capacities of these bioadsorbents can be improved by applying chemical modifications. The relevance of chemical constituents and bioactives in biosorbents derived from agricultural production such as food and fodder crops, bioenergy and cash crops, fruit and vegetable crops, medicinal and aromatic plants, plantation trees, aquatic and terrestrial weeds, and animal production such as dairy, goatery, poultry, duckery, and fisheries is highlighted in this comprehensive review for sequestering and bioremediation of CEECs, including as many as ten different heavy metals and metalloids co-contaminated with other organic micropollutants in circular bioresource utilization and one-health concepts.
Collapse
|
6
|
Ecological health risk assessment of microplastics and heavy metals in sediments, water, hydrophytes (Alternanthera philoxeroides, Typha latifolia, and Ipomoea carnea), and fish (Labeo rohita) in Marala wetlands in Sialkot, Pakistan. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:41272-41285. [PMID: 36630039 DOI: 10.1007/s11356-023-25142-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/23/2022] [Accepted: 12/31/2022] [Indexed: 06/17/2023]
Abstract
For the ecological risk assessment of heavy metals and microplastics in Marala wetlands in Sialkot, Pakistan, samples of sediments, water, aquatic plants (Alternanthera philoxeroides, Typha latifolia, and Ipomoea carnea), and fish (Labeo rohita) were studied from five different locations. Pb, Cd, and Cr concentrations were above permissible limits devised by WHO in sediments and water at most of sites. High concentrations of Cd were recorded in water samples compared to sediments with maximum values recorded at Site-2 (52.08 ± 9.55 mg kg-1) and Site-5 (62.29 ± 10.12 mg kg-1). The maximum concentrations of Cr (7.23 ± 0.40 mg kg-1) and Pb (22.87 ± 0.83 mg kg-1) were found at Site-4 in water samples. The maximum abundance of microplastics (3047 pieces kg-1 of sediments) was at Site-1 with filaments in the highest proportion among the other types. Zn, Ni, and Cu remained generally low in concentrations in both sediments and waters. Plants showed accumulation of heavy metals, notably the amount of Cd (33.36 ± 0.26 mgkg-1) and Ni (163.3 ± 1.30 mgkg-1) absorbed by T. latifolia and A. philoxeroides, respectively were high. Also, photosynthetic pigments in plants seemed to be affected. However, estimated daily intake (EDI) and provisional tolerable weekly intake (PTWI) calculations for the human population consuming fish from this wetland remained below the FAO/WHO limits. PCA analysis revealed the anthropogenic origin of metals that might be causing adverse effects on the biota which depend on this wetland for their food.
Collapse
|
7
|
Chromium toxicity and tolerance mechanisms in plants through cross-talk of secondary messengers: An overview of pathways and mechanisms. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 320:121049. [PMID: 36627046 DOI: 10.1016/j.envpol.2023.121049] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/01/2022] [Revised: 11/26/2022] [Accepted: 01/06/2023] [Indexed: 06/17/2023]
Abstract
Environmental sources of chromium (Cr) such as solid waste, battery chemicals, industrial /waste, automotive exhaust emissions, mineral mining, fertilizers, and pesticides, have detrimental effects on plants. An excessive amount of Cr exposure can lead to toxic accumulations in human, animal, and plant tissues. In plants, diverse signaling molecules like hydrogen sulfide (H2S) and nitric oxide (NO) play multiple roles during Cr stress. Consequently, the molecular mechanisms of Cr toxicity in plants, such as metal binding, modifying enzyme activity, and damaging cells are examined by several studies. The reactive oxygen species (ROS) that are formed when Cr reacts with lipids, membranes, DNA, proteins, and carbohydrates are all responsible for damage caused by Cr. ROS regulate plant growth, programmed cell death (PCD), cell cycle, pathogen defense, systemic communication, abiotic stress responses, and growth. Plants accumulate Cr mostly through the root system, with very little movement to the shoots. The characterization of stress-inducible proteins and metabolites involved in Cr tolerance and cross-talk messengers has been made possible due to recent advances in metabolomics, transcriptomics, and proteomics. This review discusses Cr absorption, translocation, subcellular distribution, and cross-talk between secondary messengers as mechanisms responsible for Cr toxicity and tolerance in plants. To mitigate this problem, soil-plant systems need to be monitored for the biogeochemical behavior of Cr and the identification of secondary messengers in plants.
Collapse
|
8
|
Procoagulant substances and mechanisms of hemostatic herb Eclipta alba. Process Biochem 2022. [DOI: 10.1016/j.procbio.2022.08.027] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
9
|
Engineered microbes as effective tools for the remediation of polyaromatic aromatic hydrocarbons and heavy metals. CHEMOSPHERE 2022; 306:135538. [PMID: 35792210 DOI: 10.1016/j.chemosphere.2022.135538] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/22/2022] [Revised: 06/04/2022] [Accepted: 06/26/2022] [Indexed: 06/15/2023]
Abstract
Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have become a major concern to human health and the environment due to rapid industrialization and urbanization. Traditional treatment measures for removing toxic substances from the environment have largely failed, and thus development and advancement in newer remediation techniques are of utmost importance. Rising environmental pollution with HMs and PAHs prompted the research on microbes and the development of genetically engineered microbes (GEMs) for reducing pollution via the bioremediation process. The enzymes produced from a variety of microbes can effectively treat a range of pollutants, but evolutionary trends revealed that various emerging pollutants are resistant to microbial or enzymatic degradation. Naturally, existing microbes can be engineered using various techniques including, gene engineering, directed evolution, protein engineering, media engineering, strain engineering, cell wall modifications, rationale hybrid design, and encapsulation or immobilization process. The immobilization of microbes and enzymes using a variety of nanomaterials, membranes, and supports with high specificity toward the emerging pollutants is also an effective strategy to capture and treat the pollutants. The current review focuses on successful bioremediation techniques and approaches that make use of GEMs or engineered enzymes. Such engineered microbes are more potent than natural strains and have greater degradative capacities, as well as rapid adaptation to various pollutants as substrates or co-metabolizers. The future for the implementation of genetic engineering to produce such organisms for the benefit of the environment andpublic health is indeed long and valuable.
Collapse
|
10
|
Psyllium-Husk-Assisted Synthesis of ZnO Microstructures with Improved Photocatalytic Properties for the Degradation of Methylene Blue (MB). NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:nano12203568. [PMID: 36296761 PMCID: PMC9609820 DOI: 10.3390/nano12203568] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/12/2022] [Revised: 10/06/2022] [Accepted: 10/08/2022] [Indexed: 05/02/2023]
Abstract
Wastewater from the textile industry is chronic and hazardous for the human body due to the presence of a variety of organic dyes; therefore, its complete treatment requires efficient, simple, and low cost technology. For this purpose, we grew ZnO microstructures in the presence of psyllium husk, and the role of psyllium husk was to modify the surface of the ZnO microstructures, create defects in the semiconducting crystal structures, and to alter the morphology of the nanostructured material. The growth process involved a hydrothermal method followed by calcination in air. Additionally, the psyllium husk, after thermal combustion, added a certain value of carbon into the ZnO nanomaterial, consequently enhancing the photocatalytic activity towards the degradation of methylene blue. We also investigated the effect of varying doses of photocatalyst on the photocatalytic properties towards the photodegradation of methylene blue in aqueous solution under the illumination of ultraviolet light. The structure and morphology of the prepared ZnO microstructures were explored by scanning electron microscopy (SEM) and powder X-ray diffraction (XRD) techniques. The degradation of methylene blue was monitored under the irradiation of ultraviolet light and in the dark. Also, the degradation of methylene blue was measured with and without photocatalyst. The photodegradation of methylene blue is highly increased using the ZnO sample prepared with psyllium husk. The photodegradation efficiency is found to be approximately 99.35% for this sample. The outperforming functionality of psyllium-husk-assisted ZnO sample is attributed to large surface area of carbon material from the psyllium husk and the synergetic effect between the incorporated carbon and ZnO itself. Based on the performance of the hybrid material, it is safe to say that psyllium husk has high potential for use where surface roughness, morphology alteration, and defects in the crystal structure are vital for the enhancing the functionality of a nanostructured material. The observed performance of ZnO in the presence of psyllium husk provides evidence for the fabrication of a low cost and efficient photocatalyst for the wastewater treatment problems.
Collapse
|
11
|
Chromium toxicity and its remediation by using endophytic bacteria and nanomaterials: A review. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2022; 318:115620. [PMID: 35772275 DOI: 10.1016/j.jenvman.2022.115620] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/31/2022] [Revised: 05/13/2022] [Accepted: 06/23/2022] [Indexed: 06/15/2023]
Abstract
Chromium (Cr) is a crucial element for all life forms. Various anthropogenic activities have been responsible for environmental contamination with Cr (VI) in recent years. For this review, articles were collected using electronic databases such as Web of Science, Pubmed, ProQuest, and Google Scholar as per the guidelines of PRISMA-2015, applying the Boolean search methods. Chromium can cause severe health complications in humans and animals and threatens the surrounding environment, with negative impacts on crop yield, development, and quality. Hence, monitoring Cr contamination is essential, and various remediation technologies have emerged in the past 50 years to reduce the amount of Cr in the environment. This review focuses on chromium exposure and the associated environmental health risks. We also reviewed sustainable remediation processes, with emphasis on nanoparticle and endophytic remediation processes.
Collapse
|
12
|
A critical review on microbes-based treatment strategies for mitigation of toxic pollutants. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 834:155444. [PMID: 35461941 DOI: 10.1016/j.scitotenv.2022.155444] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2022] [Revised: 03/31/2022] [Accepted: 04/18/2022] [Indexed: 06/14/2023]
Abstract
Contamination of the environment through toxic pollutants poses a key risk to the environment due to irreversible environmental damage(s). Industrialization and urbanization produced harmful elements such as petrochemicals, agrochemicals, pharmaceuticals, nanomaterials, and herbicides that are intentionally or unintentionally released into the water system, threatening biodiversity, the health of animals, and humans. Heavy metals (HMs) in water, for example, can exist in a variety of forms that are inclined by climate features like the presence of various types of organic matter, pH, water system hardness, transformation, and bioavailability. Biological treatment is an important tool for removing toxic contaminants from the ecosystem, and it has piqued the concern of investigators over the centuries. In situ bioremediation such as biosparging, bioventing, biostimulation, bioaugmentation, and phytoremediation and ex-situ bioremediation includes composting, land farming, biopiles, and bioreactors. In the last few years, scientific understanding of microbial relations with particular chemicals has aided in the protection of the environment. Despite intensive studies being carried out on the mitigation of toxic pollutants, there have been limited efforts performed to discuss the solutions to tackle the limitations and approaches for the remediation of heavy metals holistically. This paper summarizes the risk assessment of HMs on aquatic creatures, the environment, humans, and animals. The content of this paper highlights the principles and limitations of microbial remediation to address the technological challenges. The coming prospect and tasks of evaluating the impact of different treatment skills for pollutant remediation have been reviewed in detail. Moreover, genetically engineered microbes have emerged as powerful bioremediation capabilities with significant potential for expelling toxic elements. With appropriate examples, current challenging issues and boundaries related to the deployment of genetically engineered microbes as bioremediation on polluted soils are emphasized.
Collapse
|
13
|
Omics approaches in bioremediation of environmental contaminants: An integrated approach for environmental safety and sustainability. ENVIRONMENTAL RESEARCH 2022; 211:113102. [PMID: 35300964 DOI: 10.1016/j.envres.2022.113102] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/31/2021] [Revised: 02/28/2022] [Accepted: 03/07/2022] [Indexed: 02/05/2023]
Abstract
Non-degradable pollutants have emerged as a result of industrialization, population growth, and lifestyle changes, endangering human health and the environment. Bioremediation is the process of clearing hazardous contaminants with the help of microorganisms, and cost-effective approach. The low-cost and environmentally acceptable approach to removing environmental pollutants from ecosystems is microbial bioremediation. However, to execute these different bioremediation approaches successfully, this is imperative to have a complete understanding of the variables impacting the development, metabolism, dynamics, and native microbial communities' activity in polluted areas. The emergence of new technologies like next-generation sequencing, protein and metabolic profiling, and advanced bioinformatic tools have provided critical insights into microbial communities and underlying mechanisms in environmental contaminant bioremediation. These omics approaches are meta-genomics, meta-transcriptomics, meta-proteomics, and metabolomics. Moreover, the advancements in these technologies have greatly aided in determining the effectiveness and implementing microbiological bioremediation approaches. At Environmental Protection Agency (EPA)-The government placed special emphasis on exploring how molecular and "omic" technologies may be used to determine the nature, behavior, and functions of the intrinsic microbial communities present at pollution containment systems. Several omics techniques are unquestionably more informative and valuable in elucidating the mechanism of the process and identifying the essential player's involved enzymes and their regulatory elements. This review provides an overview and description of the omics platforms that have been described in recent reports on omics approaches in bioremediation and that demonstrate the effectiveness of integrated omics approaches and their novel future use.
Collapse
|
14
|
Role of microbes in bioaccumulation of heavy metals in municipal solid waste: Impacts on plant and human being. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 305:119248. [PMID: 35395353 DOI: 10.1016/j.envpol.2022.119248] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/27/2021] [Revised: 03/15/2022] [Accepted: 03/30/2022] [Indexed: 06/14/2023]
Abstract
The presence of heavy metals in municipal solid waste (MSW) is considered as prevalent global pollutants that cause serious risks to the environment and living organisms. Due to industrial and anthropogenic activities, the accumulation of heavy metals in the environmental matrices is increasing alarmingly. MSW causes several adverse environmental impacts, including greenhouse gas (GHG) emissions, river plastic accumulation, and other environmental pollution. Indigenous microorganisms (Pseudomonas, Flavobacterium, Bacillus, Nitrosomonas, etc.) with the help of new pathways and metabolic channels can offer the potential approaches for the treatment of pollutants. Microorganisms, that exhibit the ability of bioaccumulation and sequestration of metal ions in their intracellular spaces, can be utilized further for the cellular processes like enzyme signaling, catalysis, stabilizing charges on biomolecules, etc. Microbiological techniques for the treatment and remediation of heavy metals provide a new prospects for MSW management. This review provides the key insights on profiling of heavy metals in MSW, tolerance of microorganisms, and application of indigenous microorganisms in bioremediation. The literatures revealed that indigenous microbes can be exploited as potential agents for bioremediation.
Collapse
|
15
|
Crosstalk and gene expression in microorganisms under metals stress. Arch Microbiol 2022; 204:410. [PMID: 35729415 DOI: 10.1007/s00203-022-02978-8] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2022] [Revised: 05/04/2022] [Accepted: 05/11/2022] [Indexed: 11/02/2022]
Abstract
Contamination of the environment with heavy metals (HMs) has led to huge global environmental issues. Industrialization activities such as mining, manufacturing, and construction generate massive amounts of toxic waste, posing environmental risks. HMs soil pollution causes a variety of environmental issues and has a detrimental effect on both animals and plants. To remove HMs from the soil, traditional physico-chemical techniques such as immobilization, electro-remediation, stabilization, and chemical reduction are used. Moreover, the high energy, trained manpower, and hazardous chemicals required by these methods make them expensive and non-environmentally friendly. Bioremediation process, which involves microorganism-based and microorganism-associated-plant-based approaches, is an ecologically sound and cost-effective strategy for restoring HMs polluted soil. Microbes adjust their physiology to these conditions to live, which can involve significant variations in the expression of the genes. A set of genes are activated in response to toxic metals in microbes. They can also adapt by modifying their shape, fruiting bodies creating biofilms, filaments, or chemotactically migrating away from stress chemicals. Microbes including Bacillus sp., Pseudomonas sp., and Aspergillus sp. has been found to have high metals remediation and tolerance capacity of up to 98% whether isolated or in combination with plants like Helianthus annuus, Trifolium repens, and Vallisneria denseserrulata. Several of the regulatory systems that have been discovered are unique, but there is also a lot of "cross-talk" among networks. This review discusses the current state of knowledge regarding the microbial signaling responses, and the function of microbes in HMs stress resistance.
Collapse
|
16
|
Identification of heavy metals tolerant Brevundimonas sp. from rhizospheric zone of Saccharum munja L. and their efficacy in in-situ phytoremediation. CHEMOSPHERE 2022; 295:133823. [PMID: 35114263 DOI: 10.1016/j.chemosphere.2022.133823] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/05/2021] [Revised: 01/19/2022] [Accepted: 01/29/2022] [Indexed: 06/14/2023]
Abstract
Heavy metals phytoremediation from pulp and paper industry (PPI) sludge was conducted by employing root-associated Brevundimonas sp (PS-4 MN238722.1) in rhizospheric zone of Saccharum munja L. for its detoxification. The study was aimed to investigate the efficiency of Saccharum munja L. for the removal of heavy metals along with physico-chemical parameters through bacterial interactions. Physico-chemical examination of PPI sludge showed biochemical oxygen demand (8357 ± 94 mg kg-1), electrical conductivity (2264 ± 49 μmhoscm-1), total phenol (521 ± 24 mg kg-1), total dissolve solid (1547 ± 23 mg kg-1), total nitrogen (264 ± 2.13 mg kg-1), pH (8.2 ± 0.11), chemical oxygen demand (34756 ± 214 mg kg-1), color (2434 ± 45 Co-Pt), total suspended solid (76 ± 0.67 mg kg-1), sulphate (2462 ± 13 mg kg-1), chlorolignin (597 ± 13.01 mg kg-1), K+ (21.04 ± 0.26 mg kg-1), total solid (1740 ± 54 mg kg-1), phosphorous, Cl-, and Na+. Heavy metals, such as Fe followed by Zn, Mn, Cd, Cu, Ni, Pb, As, Cr and Hg were above the permissible limit. Root and shoot of Saccharum munja L. revealed highest concentrations of Cd followed by Mn, Ni, Fe, Zn, Cu, As, Cr, Hg, and Pb. Tested metals (Fe, Mn, Pb, Cd, Cr, Cu, Zn, Ni, As, and Hg) bioaccumulation and translocation factors were also revealed to be < 1 and >1, respectively, demonstrating that these plants have considerable absorption and translocation abilities. Plant growth-promoting activity, such as ligninolytic enzymes, hydrolytic enzymes, indole acetic acid, and siderophore production activity of Brevundimonas sp. (PS-4 MN238722.1) were also noted to be higher. These findings support the use of Brevundimonas sp (PS-4 MN238722.1) in combination with Saccharum munja L. plant as interdisciplinary management of industrial sludge at polluted areas for the prevention of soils near the industrial site.
Collapse
|
17
|
Identification and profiling of microbial community from industrial sludge. Arch Microbiol 2022; 204:234. [PMID: 35362813 DOI: 10.1007/s00203-022-02831-y] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2021] [Revised: 03/05/2022] [Accepted: 03/06/2022] [Indexed: 02/03/2023]
Abstract
The purpose of this study is to identify microbial communities in pulp and paper industry sludge and their metagenomic profiling on the basis of; phylum, class, order, family, genus and species level. Results revealed that the dominant phyla in 16S rRNA Illumina Miseq analysis inside sludge were Anaerolinea, Pseudomonas, Clostridia, Bacteriodia, Gammaproteobacteria, Spirochetia, Deltaproteobacteria, Spirochaetaceae, Prolixibacteraceae and some unknown microbial strains are also dominant. Metagenomics is a molecular biology-based technology that uses bioinformatics to evaluate huge gene sequences extracted from environmental samples to assess the composition and function of microbiota. The results of metabarcoding of the V3-V4 16S rRNA regions acquired from paired-end Illumina MiSeq sequencing were used to analyze bacterial communities and structure. The present work demonstrates the potential approach to sludge treatment in the open environment via the naturally adapted microorganism, which could be an essential addition to the disposal site. In summary, these investigations indicate that the indigenous microbial community is an acceptable bioresource for remediation or detoxification following secondary treatment. This research aims at understanding the structure of microbial communities and their diversity (%) in highly contaminated sludge to perform in situ bioremediation.
Collapse
|
18
|
Remediation of noxious wastewater using nanohybrid adsorbent for preventing water pollution. CHEMOSPHERE 2022; 292:133380. [PMID: 34953871 DOI: 10.1016/j.chemosphere.2021.133380] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/28/2021] [Revised: 12/13/2021] [Accepted: 12/18/2021] [Indexed: 06/14/2023]
Abstract
Removal of toxic elements from wastewater effluent has got a lot of attention because of their severe negative effects on human and environmental health. In the past few years, rapid urbanization and industrial activities in developing countries have exacerbated the destruction of the environment. Most of the wastewater effluents are discharged untreated or inadequately treated, which has become a major concern due to its impact on sustainability and the environment. This is imperative to implement, innovative and resourceful wastewater treatment technologies requiring low investment. Among the various treatment technologies, cutting-edge processes in nano-material sciences have recently piqued the interest of scientists. Nanohybrid absorbents have the potential in improving wastewater treatment and increase water supply by utilizing unconventional water resources. Carbon nanotubes, titanium oxide, manganese oxide, activated carbon (AC), magnesium oxide, graphene, ferric oxides, and zinc oxide are examples of nano-adsorbents that are used to eliminate pollutants. This also demonstrated the effective removal of contaminants along with the harmful effects of chemicals, colorants, and metals found in wastewater. The present manuscript examines potential advances in nanotechnology in wastewater treatment for the prevention of water and soil pollution. This systematic review aims to highlight the importance of nanohybrid absorbents treatment technology for wastewater treatment and to explain how nanohybrid absorbents have the potential to revolutionize industrial pollution. There are also other published review articles on this topic but the present review covers an in-depth information on nano-adsorbents and their targeted contaminants.
Collapse
|
19
|
Emerging microalgae-based technologies in biorefinery and risk assessment issues: Bioeconomy for sustainable development. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 813:152417. [PMID: 34923013 DOI: 10.1016/j.scitotenv.2021.152417] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/05/2021] [Revised: 12/08/2021] [Accepted: 12/10/2021] [Indexed: 06/14/2023]
Abstract
Industrial wastewater treatment is of paramount importance considering the safety of the aquatic ecosystem and its associated health risk to humankind inhabiting near the water bodies. Microalgae-based technologies for remediation of environmental pollutants present avenues for bioenergy applications and production of value-added biochemicals having pharmaceutical, nutraceutical, antioxidants, carbohydrate, phenolics, long-chain multi-faceted fatty acids, enzymes, and proteins which are considered healthy supplements for human health. Such a wide range of products put up a good case for the biorefinery concept. Microalgae play a pivotal role in degrading complex pollutants, such as organic and inorganic contaminants thereby efficiently removing them from the environment. In addition, microalgal species, such as Botryococcus braunii, Tetraselmis suecica, Phaeodactylum tricornutum, Neochloris oleoabundans, Chlorella vulgaris, Arthrospira, Chlorella, and Tetraselmis sp., etc., are also reported for generation of value-added products. This review presents a holistic view of microalgae based biorefinery starting from cultivation and harvesting of microalgae, the potential for remediation of environmental pollutants, bioenergy application, and production of value-added biomolecules. Further, it summarizes the current understanding of microalgae-based technologies and discusses the risks involved, potential for bioeconomy, and outlines future research directions.
Collapse
|
20
|
Impact of effluent of Pulp & Paper industry on the flora of river basin at Jaykaypur, Odisha, India and its ecological implications. ENVIRONMENTAL RESEARCH 2022; 204:111769. [PMID: 34419471 DOI: 10.1016/j.envres.2021.111769] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/10/2021] [Revised: 07/22/2021] [Accepted: 07/23/2021] [Indexed: 05/24/2023]
Abstract
The JK Paper industry located at Rayagada discharges biologically untreated effluent more than the permissible limit prescribed by Pollution Control Board, Odisha in to the environment. The industry is seriously polluting the surrounding aquatic and terrestrial environment. No detailed intensive study was carried out by previous workers on this industry earlier. The present study aims at finding out the impact of effluent on the flora at the contaminated site. The chemically treated effluent (TE) contained significant amount of mercury and cadmium. The TE has high BOD, COD, dissolved solids and suspended solids when compared to normal river water at the site of discharge. The TE deteriorated the natural water bodies changing the physico-chemical properties of natural river water. After meeting the river water the TE was diluted after 1 km distance from the meeting point of the river. Crop plants collected from the contaminated site showed higher level of residual Hg and Cd and significant depletion in pigment was observed. Plants collected from both the sides of the treated effluent canal showed significant amount residue mercury and cadmium in the plant leaves. The plants exposed to the TE, showed variation in chlorophyll and Phaeophytin pigment content when compared to their respective control values in all terrestrial plants collected from the contaminated site. In some plant leaves little increment in the pigment level was noted but the values were not significant. The changes observed in the plant pigment might be due to heavy metal accumulation. The presence of residual Hg and Cd in crop plants and plant leaves grazed by grazing animals after absorption, accumulation and enrichment may lead to a possible biological magnification, warrants attention. Proper biological treatment, treatment of effluent by modern methods and removal of heavy metals from the effluent before discharge by the industry is suggested.
Collapse
|
21
|
Phytoremediation of Soils Contaminated with Heavy Metals from Gold Mining Activities Using Clidemia sericea D. Don. PLANTS (BASEL, SWITZERLAND) 2022; 11:597. [PMID: 35270068 PMCID: PMC8912359 DOI: 10.3390/plants11050597] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/11/2021] [Revised: 02/14/2022] [Accepted: 02/17/2022] [Indexed: 06/14/2023]
Abstract
Soils contaminated by potentially toxic elements (PTEs) as a result of anthropogenic activities such as mining are a problem due to the adverse effects on human and environmental health, making it necessary to seek sustainable strategies to remediate contaminated areas. The objective of this study was to evaluate the species Clidemia sericea D. Don for the phytoremediation of soils contaminated with PTEs (Hg, Pb, and Cd) from gold mining activities. The study was conducted for three months, with soils from a gold mining area in northern Colombia, and seeds of C. sericea, under a completely randomized experimental design with one factor (concentration of PTEs in soil) and four levels (control (T0), low (T1), medium (T2), and high (T3)), each treatment in triplicate, for a total of twelve experimental units. Phytotoxic effects on plants, bioconcentration (BCF), and translocation (TF) factors were determined. The results obtained for the tissues differed in order of metal accumulation, with the root showing the highest concentration of metals. The highest values of bioconcentration (BCF > 1) were presented for Hg at T3 and Cd in the four treatments; and of translocation (TF > 1) for Hg and Pb at T0 and T1; however, for Pb, the TF indicates that it is transferable, but it is not considered for phytoextraction. Thus, C. sericea demonstrated its potential as a phytostabilizer of Hg and Cd in mining soils, strengthening as a wild species with results of resistance to the stress of the PTEs evaluated, presenting similar behavior and little phytotoxic affectation on the growth and development of each of the plants in the different treatments.
Collapse
|
22
|
Abstract
Industrial effluents/wastewater are the main sources of hexavalent chromium (Cr (VI)) pollutants in the environment. Cr (VI) pollution has become one of the world’s most serious environmental concerns due to its long persistence in the environment and highly deadly nature in living organisms. To its widespread use in industries Cr (VI) is highly toxic and one of the most common environmental contaminants. Cr (VI) is frequently non-biodegradable in nature, which means it stays in the environment for a long time, pollutes the soil and water, and poses substantial health risks to humans and wildlife. In living things, the hexavalent form of Cr is carcinogenic, genotoxic, and mutagenic. Physico-chemical techniques currently used for Cr (VI) removal are not environmentally friendly and use a large number of chemicals. Microbes have many natural or acquired mechanisms to combat chromium toxicity, such as biosorption, reduction, subsequent efflux, or bioaccumulation. This review focuses on microbial responses to chromium toxicity and the potential for their use in environmental remediation. Moreover, the research problem and prospects for the future are discussed in order to fill these gaps and overcome the problem associated with bacterial bioremediation’s real-time applicability.
Collapse
|
23
|
Quorum sensing - a promising tool for degradation of industrial waste containing persistent organic pollutants. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 292:118342. [PMID: 34653589 DOI: 10.1016/j.envpol.2021.118342] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/06/2021] [Revised: 09/28/2021] [Accepted: 10/08/2021] [Indexed: 06/13/2023]
Abstract
Restoring an environment contaminated with persistent organic pollutants (POPs) is highly challenging. Biodegradation by biofilm-forming bacteria through quorum sensing (QS) is a promising treatment process to remove these pollutants and promotes eco-restoration. QS plays an important role in biofilm formation, solubilization, and biotransformation of pollutants. QS is a density-based communication between microbial cells via signalling molecules, which coordinates specific characters and helps bacteria to acclimatize against stress conditions. Genetic diversification of a biofilm offers excellent opportunities for horizontal gene transfer, improves resistance against stress, and provides a suitable environment for the metabolism of POPs. To develop this technology in industrial scale, it is important to understand the fundamentals and ubiquitous nature of QS bacteria and appreciate the role of QS in the degradation of POPs. Currently, there are knowledge gaps regarding the environmental niche, abundance, and population of QS bacteria in wastewater treatment systems. This review aims to present up-to-date and state-of-the-art information on the roles of QS and QS-mediated strategies in industrial waste treatment including biological treatments (such as activated sludge), highlighting their potentials using examples from the pulp and paper mill industry, hydrocarbon remediation and phytoremediation. The information will help to provide a throughout understanding of the potential of QS to degrade POPs and advance the use of this technology. Current knowledge of QS strategies is limited to laboratory studies, full-scale applications remain challenging and more research is need to explore QS gene expression and test in full-scale reactors for wastewater treatment.
Collapse
|
24
|
Microbial community dynamics and their relationships with organic and metal pollutants of sugarcane molasses-based distillery wastewater sludge. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 292:118267. [PMID: 34601036 DOI: 10.1016/j.envpol.2021.118267] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/28/2021] [Revised: 09/24/2021] [Accepted: 09/29/2021] [Indexed: 06/13/2023]
Abstract
Distillery sludge is a major source of aquatic pollution, but little is known about their microbial community and their association with the organic and metal pollutants. Sugarcane molasses-based distillery is an important industry in India, although the waste is usually treated prior to disposal, the treatment is often inadequate. The adverse effects of the organic and metal pollutants in sugarcane molasses-based distillery sludge on the microbial biodiversity and abundance in the disposal site have not been elucidated. This study aims to address this gap of knowledge. Samples were collected from the discharge point, 1 and 2 km downstream (D1, D2, and D3, respectively) of a sugarcane distillery in Uttar Pradesh, India, and their physico-chemical properties characterised. Using QIIME, taxonomic assignment for the V3 and V4 hypervariable regions of 16 S rRNA was performed. The phyla Proteobacteria (28-39%), Firmicutes (20-28%), Bacteriodetes (9-10%), Actinobacteria (5-10%), Tenericutes (1-9%) and Patescibacteria (2%) were the predominant bacteria in all three sites. Euryechaeota, were detected in sites D1 and D2 (1-2%) but absent in D3. Spirochaetes (5%), Sinergistetes (2%) and Cloacimonetes (1%) were only detected in samples from site D1. Shannon, Simpson, Chao1, and Observed-species indices indicated that site D1 (10.18, 0.0013, 36706.55 and 45653.84, respectively) has higher bacterial diversity and richness than D2 (6.66, 0.0001, 25987.71 and 49655.89, respectively) and D3 (8.31, 0.002, 30345.53 and 30654.88, respectively), suggesting the organic and metal pollutants provided the stressors to favour the survival of microbial community that can biodegrade and detoxify them in the distillery sludge. This study confirmed that the treatment of the distillery waste was not sufficiently effective and provided new metagenomic information on its impact on the surrounding microbial community. It also offered new insights into potential bioremediation candidates.
Collapse
|
25
|
Evaluation of pollution parameters and toxic elements in wastewater of pulp and paper industries in India: A case study. CASE STUDIES IN CHEMICAL AND ENVIRONMENTAL ENGINEERING 2021. [DOI: 10.1016/j.cscee.2021.100163] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
|
26
|
Bioremediation of heavy metals from industrial effluents by endophytes and their metabolic activity: Recent advances. BIORESOURCE TECHNOLOGY 2021; 339:125589. [PMID: 34304098 DOI: 10.1016/j.biortech.2021.125589] [Citation(s) in RCA: 40] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/27/2021] [Revised: 07/10/2021] [Accepted: 07/13/2021] [Indexed: 05/22/2023]
Abstract
Worldwide, heavy metals pollution is mostly caused by rapid population growth and industrial development which is accumulated in food webs causing a serious public health risk. Endophytic microorganisms have a variety of mechanisms for metal sequestration having metal biosorption capacities.Endophytic organisms like bacteria and fungi provide beneficial qualities that help plants to improve their health, reduce stress, and detoxify metals. Endophytes have a higher proclivity for improving metal and mineral solubility by cells that secrete low-molecular-weight organic acids and metal-specific ligands like siderophores, which change the pH of the soil and improve binding activity. Protein-related approaches like chromatin immunoprecipitation sequencing (ChIP-Seq) and modified enzyme-linked immunosorbent assay (ELISA test) can represent endophytic bacterial community and DNA-protein interactions during metal reduction. This review explored the role of endophytes in bioremediation approaches that can help in analyzing the potential and prospects in response to industrial effluents' detoxification.
Collapse
|
27
|
Heavy Metals and Human Health: Possible Exposure Pathways and the Competition for Protein Binding Sites. Molecules 2021; 26:molecules26196060. [PMID: 34641604 PMCID: PMC8511997 DOI: 10.3390/molecules26196060] [Citation(s) in RCA: 84] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/12/2021] [Revised: 10/03/2021] [Accepted: 10/05/2021] [Indexed: 11/16/2022] Open
Abstract
Heavy metals enter the human body through the gastrointestinal tract, skin, or via inhalation. Toxic metals have proven to be a major threat to human health, mostly because of their ability to cause membrane and DNA damage, and to perturb protein function and enzyme activity. These metals disturb native proteins’ functions by binding to free thiols or other functional groups, catalyzing the oxidation of amino acid side chains, perturbing protein folding, and/or displacing essential metal ions in enzymes. The review shows the physiological and biochemical effects of selected toxic metals interactions with proteins and enzymes. As environmental contamination by heavy metals is one of the most significant global problems, some detoxification strategies are also mentioned.
Collapse
|
28
|
Degradation of organometallic pollutants of distillery wastewater by autochthonous bacterial community in biostimulation and bioaugmentation process. BIORESOURCE TECHNOLOGY 2021; 338:125518. [PMID: 34273628 DOI: 10.1016/j.biortech.2021.125518] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/20/2021] [Revised: 07/02/2021] [Accepted: 07/04/2021] [Indexed: 06/13/2023]
Abstract
This study aimed to detoxify and degrade the organometallic pollutants from distillery wastewater by using an autochthonous microbial community via biostimulation and bioaugmentation process. Results revealed that the wastewater contained high concentrations of the metals i.e. Fe-2403; Zn-210.15; Cr- 22.825; Cu-73.62; Mg-27.30; Ni-14.425; and Pb-17.33 (mg L-1). The biostimulation and bioaugmentation process resulted from a substantial reduction (50-70%) in the pollution load. Scanning electron microscopy analysis showed bacterial community and their relationship with complex organometallic pollutants during the chemical reactions. The major identified organic pollutants in the control (untreated) samples were acetic acid, Oxo-,trimethylsilyl ester [CAS], Hydrocinnamic acid, p-[Trimethylsiloxy]-trimethylsilyl ester and tetradecanoic acid, trimethylsilyl ester [CAS] while some new metabolic products were generated as a by-product in bioaugmentation process. Therefore, the study showed that biostimulation and bioaugmentation were successful bioremediation strategies for the detoxification of distillery wastewater and restoration of organometallic polluted sites.
Collapse
|
29
|
Metal and metal(loids) removal efficiency using genetically engineered microbes: Applications and challenges. JOURNAL OF HAZARDOUS MATERIALS 2021; 416:125855. [PMID: 34492804 DOI: 10.1016/j.jhazmat.2021.125855] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/25/2021] [Revised: 03/30/2021] [Accepted: 04/06/2021] [Indexed: 06/13/2023]
Abstract
The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment.
Collapse
|
30
|
Biodegradation of organo-metallic pollutants in distillery wastewater employing a bioaugmentation process. ENVIRONMENTAL TECHNOLOGY & INNOVATION 2021; 23:101774. [DOI: 10.1016/j.eti.2021.101774] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/27/2023]
|
31
|
Biocatalytic remediation of industrial pollutants for environmental sustainability: Research needs and opportunities. CHEMOSPHERE 2021; 272:129936. [PMID: 35534980 DOI: 10.1016/j.chemosphere.2021.129936] [Citation(s) in RCA: 34] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/13/2020] [Revised: 01/24/2021] [Accepted: 02/06/2021] [Indexed: 06/14/2023]
Abstract
An increasing quantum of pollutants from various industrial sector activities represents a severe menace to environmental & ecological balance. Bioremediation is gaining flow globally due to its cost-effective and environment-friendly nature. Understanding biodegradation mechanisms is of high ecological significance. Application of microbial enzymes has been reported as sustainable approach to mitigate the pollution. Immobilized enzyme catalyzed transformations are getting accelerated attention as potential alternatives to physical and chemical methods. The attention is now also focused on developing novel protein engineering strategies and bioreactor design systems to ameliorate overall biocatalysis and waste treatment further. This paper presents and discusses the most advanced and state of the art scientific & technical developments about biocatalytic remediation of industrial pollutants. It also covers various biocatalysts and the associated sustainable technologies to remediate various pollutants from waste streams. Enzyme production and immobilization in bioreactors have also been discussed. This paper also covers challenges and future research directions in this field.
Collapse
|