Unravelling the economics behind mainstream anaerobic membrane bioreactor application under different plant layouts

Harvesting of dissolved methane from anaerobic effluents for enhanced nitrogen removal in mainstream wastewater

The presence of dissolved methane in anaerobic effluents from wastewater treatment plants (WWTPs) significantly contributes to methane emissions. To mitigate this issue, this study introduced the Self-breathing Biofilm Reactor (SbBfR), which achieved a 94 % retention rate of dissolved methane during the aeration stage. Counter-diffusion and co-diffusion systems were established to enhance microbial interactions for both dissolved methane oxidation and nitrogen removal. These systems varied based on alignment or opposition of substrates with externally supplied oxygen. Specifically, the counter-diffusion system isolated oxygen and methane, favoring denitrifying anaerobic methane oxidizing microorganisms, achieving nitrogen removal rate of 175 mg N/L/d with an efficiency of up to 88 %. The spatial distribution patterns of aerobic and anaerobic microbes within the biofilms were characterized using 16S rRNA gene amplicon sequencing combined with cryosection and qPCR analysis. This approach provides a promising solution for reducing dissolved methane emissions from WWTPs while simultaneously achieving efficient nitrogen removal, offering valuable insights for practical wastewater treatment applications.

Anaerobic membrane bioreactors for municipal wastewater: Progress in resource and energy recovery improvement approaches

Anaerobic membrane bioreactor (AnMBR) offer promise in municipal wastewater treatment, with potential benefits including high-quality effluent, energy recovery, sludge reduction, and mitigating greenhouse gas emissions. However, AnMBR face hurdles like membrane fouling, low energy recovery, etc. In light of net-zero carbon target and circular economy strategy, this work sought to evaluate novel AnMBR configurations, focusing on performance, fouling mitigation, net-energy generation, and nutrients-enhancing integrated configurations, such as forward osmosis (FO), membrane distillation (MD), bioelectrochemical systems (BES), membrane photobioreactor (MPBR), and partial nitrification-anammox (PN/A). In addition, we highlight the essential role of AnMBR in advancing the circular economy and propose ideas for the water-energy-climate nexus. While AnMBR has made significant progress, challenges, such as fouling and cost-effectiveness persist. Overall, the use of novel configurations and energy recovery strategies can further improve the sustainability and efficiency of AnMBR systems, making them a promising technology for future sustainable municipal wastewater treatment.

Insights on pretreatment technologies for partial nitrification/anammox processes: A critical review and future perspectives

For almost 20 years, partial nitrification-anammox (PN/A) has been the subject of intensive study and development. Pretreatment of wastewater for PN/A is crucial because the inhibitory substances in the influent may reduce the performance of PN/A. In this review, the current PN/A pretreatment technologies are comprehensively summarized. The selection of pretreatment technology for PN/A depending on the source of the wastewater and its main characteristics (high-strength wastewater or municipal wastewater, organic matters, suspended solids). Comparison of pretreatment technologies through multiple perspectives including wastewater characteristics, the objectives of the wastewater treatment (treating requirement, energy and resource recovery demand), reactor configuration of PN/A. Based on the discussion, two integrated processes, HRAS + one-stage PN/A and advanced AD + two-stage PN/A, are recommended as the preferred processes for treating municipal wastewater and wastewater with a high-strength ammonium, respectively. This review aims to provide guidance for future research and development of PN/A.

Energy-Efficient AnMBRs Technology for Treatment of Wastewaters: A Review

In recent years, anaerobic membrane bioreactor (AnMBRs) technology, a combination of a biological reactor and a selective membrane process, has received increasing attention from both industrialists and researchers. Undoubtedly, this is due to the fact that AnMBRs demonstrate several unique advantages. Firstly, this paper addresses fundamentals of the AnMBRs technology and subsequently provides an overview of the current state-of-the art in the municipal and domestic wastewaters treatment by AnMBRs. Since the operating conditions play a key role in further AnMBRs development, the impact of temperature and hydraulic retention time (HRT) on the AnMBRs performance in terms of organic matters removal is presented in detail. Although membrane technologies for wastewaters treatment are known as costly in operation, it was clearly demonstrated that the energy demand of AnMBRs may be lower than that of typical wastewater treatment plants (WWTPs). Moreover, it was indicated that AnMBRs have the potential to be a net energy producer. Consequently, this work builds on a growing body of evidence linking wastewaters treatment with the energy-efficient AnMBRs technology. Finally, the challenges and perspectives related to the full-scale implementation of AnMBRs are highlighted.

Impact of permeate flux and gas sparging rate on membrane performance and process economics of granular anaerobic membrane bioreactors

This research investigated the impact of permeate flux and gas sparging rate on membrane permeability, dissolved and colloidal organic matter (DCOM) rejection and process economics of granular anaerobic membrane bioreactors (AnMBRs). The goal of the study was to understand how membrane fouling control strategies influence granular AnMBR economics. To this end, short- and long-term filtration tests were performed under different permeate flux and specific gas demand (SGD) conditions. The results showed that flux and SGD conditions had a direct impact on membrane fouling. At normalised fluxes (J₂₀) of 4.4 and 8.7 L m^-2 h^-1 (LMH) the most favourable SGD condition was 0.5 m³ m^-2 h^-1, whereas at J₂₀ of 13.0 and 16.7 LMH the most favourable SGD condition was 1.0 m³ m^-2 h^-1. The flux and the SGD did not have a direct impact on DCOM rejection, with values ranging between 31 and 44%. The three-dimensional excitation-emission matrix fluorescence (3DEEM) spectra showed that protein-like fluorophores were predominant in mixed liquor and permeate samples (67-79%) and were retained by the membrane (39-50%). This suggests that protein-like fluorophores could be an important foulant for these systems. The economic analysis showed that operating the membranes at moderate fluxes (J₂₀ = 7.8 LMH) and SGD (0.5 m³ m^-2 h^-1) could be the most favourable alternative. Finally, a sensitivity analysis illustrated that electricity and membrane cost were the most sensitive economic parameters, which highlights the importance of reducing SGD requirements and improving membrane permeability to reduce costs of granular AnMBRs.

Integrated anaerobic and algal bioreactors: A promising conceptual alternative approach for conventional sewage treatment

Conventional sewage treatment applying activated sludge processes is energy-intensive and requires great financial input, hampering widespread implementation. The introduction of anaerobic membrane bioreactors (AnMBR) followed by an algal reactor growing species of commercial interest, may present an alternative, contributing to the envisaged resource recovery at sewage treatment plants. AnMBRs can be applied for organic matter removal with energy self-sufficiency, provided that effective membrane fouling management is applied. Haematococcus pluvialis, an algal species with commercial value, can be selected for ammonium and phosphate removal. Theoretical analysis showed that good pollutant removal, positive financial output, as well as a significant reduction in the amount of hazardous activated sludge can be achieved by applying the proposed process, showing interesting advantages over current sewage treatment processes. Microbial contamination to H. pluvialis is a challenge, and technologies for preventing the contamination during continuous sewage treatment need to be applied.

Effect of ultrasonication on waste activated sludge rheological properties and process economics

The present study provides an overall view of the effect of the ultrasound treatment on waste activated sludge (WAS) rheological and dewatering properties as well as its impact on the economic balance of a theoretical wastewater treatment plant. The results showed that ultrasonication at 27,000 kJ/kg TS increased the soluble protein concentration (> 100%), bound water content (∼25%), and capillary suction time (> 100%) of WAS. The molecular weight distribution of the extracellular polymeric substances (EPS) revealed that the ultrasound treatment solubilised a portion of the peptides and low-molecular-weight proteins. The thixotropic behaviour of the WAS was analysed by means of a rheological structural model that defines the time evolution of a structural parameter as a function of kinetic coefficients for the breakdown and build-up processes. The ultrasound treatment reduced the kinetic coefficients for the breakdown process and changed the fast speed of alignment of flocs because of the reduction of WAS structures. Similarly, the creep tests revealed that the ultrasound treatment at 27,000 kJ/kg TS reduced the initial elasticity (∼80%) and the zero-shear rate viscosity (∼60%), which means that the internal structure of the WAS loosened and disrupted. Finally, a techno-economic analysis showed that ultrasonication was not yet economically favourable since its implementation increased 14% the net cost for WAS treatment and disposal. However, a sensitivity analysis illustrated that increasing electricity revenue and reducing biosolids disposal costs through improvement in WAS biodegradability is important to make ultrasound implementation economically attractive.

Co-digestion of sewage sludge and food waste in a wastewater treatment plant based on mainstream anaerobic membrane bioreactor technology: A techno-economic evaluation

The implementation of anaerobic membrane bioreactor as mainstream technology would reduce the load of sidestream anaerobic digesters. This research evaluated the techno-economic implications of co-digesting sewage sludge and food waste in such wastewater treatment plants to optimise the usage of the sludge line infrastructure. Three organic loading rates (1.0, 1.5 and 2.0 kg VS m^-3 d^-1) and different strategies to manage the additional nutrients backload were considered. Results showed that the higher electricity revenue from co-digesting food waste offsets the additional costs of food waste acceptance infrastructure and biosolids disposal. However, the higher electricity revenue did not offset the additional costs when the nutrients backload was treated in the sidestream (partial-nitritation/anammox and struvite precipitation). Biosolids disposal was identified as the most important gross cost contributor in all the scenarios. Finally, a sensitivity analysis showed that food waste gate fee had a noticeable influence on co-digestion economic feasibility.