Lipid bioproduction from delignified native grass (Cyperus distans) hydrolysate by Yarrowia lipolytica

Challenges and prospects of yeast-based microbial oil production within a biorefinery concept

Biodiesel, unlike to its fossil-based homologue (diesel), is renewable. Its use contributes to greater sustainability in the energy sector, mainly by reducing greenhouse gas emissions. Current biodiesel production relies on plant- and animal-related feedstocks, resulting in high final costs to the prices of those raw materials. In addition, the production of those materials competes for arable land and has provoked a heated debate involving their use food vs. fuel. As an alternative, single-cell oils (SCOs) obtained from oleaginous microorganisms are attractive sources as a biofuel precursor due to their high lipid content, and composition similar to vegetable oils and animal fats. To make SCOs competitive from an economic point of view, the use of readily available low-cost substrates becomes essential. This work reviews the most recent advances in microbial oil production from non-synthetic sugar-rich media, particularly sugars from lignocellulosic wastes, highlighting the main challenges and prospects for deploying this technology fully in the framework of a Biorefinery concept.

Combining orthogonal plant and non-plant fatty acid biosynthesis pathways for efficient production of microbial oil enriched in nervonic acid in Yarrowia lipolytica

Nervonic acid has proven efficacy in brain development and the prevention of neurodegenerative diseases. Here, an alternative and sustainable strategy for nervonic acid-enriched plant oil production was established. Different β-ketoacyl-CoA synthases and heterologous Δ15 desaturase were co-expressed, combined with the deletion of the β-oxidation pathway to construct orthogonal plant and non-plant nervonic acid biosynthesis pathways in Yarrowia lipolytica. A "block-pull-restrain" strategy was further applied to improve the supply of stearic acid as the precursor of the non-plant pathway. Then, lysophosphatidic acid acyltransferase from Malania oleifera (MoLpaat) was identified, which showed specificity for nervonic acid. Endogenous LPAAT was exchanged by MoLPAAT resulted in 17.10 % nervonic acid accumulation. Finally, lipid metabolism was engineered and cofactor supply was increased to boost the lipid accumulation in a stable null-hyphal strain. The final strain produced 57.84 g/L oils with 23.44 % nervonic acid in fed-batch fermentation, which has the potential to substitute nervonic acid-enriched plant oil.

Reprogramming the fatty acid metabolism of Yarrowia lipolytica to produce the customized omega-6 polyunsaturated fatty acids

Omega-6 polyunsaturated fatty acids (ω6-PUFAs), such as γ-linolenic acid (GLA), dihomo-γ-linolenic acid (DGLA) and arachidonic acid (ARA), are indispensable nutrients for human health. Harnessing the lipogenesis pathway of Yarrowia lipolytica creates a potential platform for producing customized ω6-PUFAs. This study explored the optimal biosynthetic pathways for customized production of ω6-PUFAs in Y. lipolytica via either the Δ6 pathway from Mortierella alpina or the Δ8 pathway from Isochrysis galbana. Subsequently, the proportion of ω6-PUFAs in total fatty acids (TFAs) was effectively increased by bolstering the provision of precursors for fatty acid biosynthesis and carriers for fatty acid desaturation, as well as preventing fatty acid degradation. Finally, the proportions of GLA, DGLA and ARA synthesized by customized strains accounted for 22.58%, 46.65% and 11.30% of TFAs, and the corresponding titers reached 386.59, 832.00 and 191.76 mg/L in shake-flask fermentation, respectively. This work provides valuable insights into the production of functional ω6-PUFAs.

Microbial Lipid Based Biorefinery Concepts: A Review of Status and Prospects

The use of lignocellulosic biomass as a raw material for the production of lipids has gained increasing attention, especially in recent years when the use of food in the production of biofuels has become a current technology. Thus, the competition for raw materials for both uses has brought the need to create technological alternatives to reduce this competition that could generate a reduction in the volume of food offered and a consequent commercial increase in the value of food. Furthermore, the use of microbial oils has been studied in many industrial branches, from the generation of renewable energy to the obtainment of several value-added products in the pharmaceutical and food industries. Thus, this review provides an overview of the feasibility and challenges observed in the production of microbial lipids through the use of lignocellulosic biomass in a biorefinery. Topics covered include biorefining technology, the microbial oil market, oily microorganisms, mechanisms involved in lipid-producing microbial metabolism, strain development, processes, lignocellulosic lipids, technical drawbacks, and lipid recovery.

Dual strategy for bioconversion of elephant grass biomass into fermentable sugars using Trichoderma reesei towards bioethanol production

In this study, biodelignification and enzymatic hydrolysis of elephant grass were performed by recombinant and native strain of Trichoderma reesei, respectively. Initially, rT. reesei displaying Lip8H and MnP1 gene was used for biodelignification with NiO nanoparticles. Saccharification was performed by combining hydrolytic enzyme produced with NiO nanoparticles. Elephant grass hydrolysate was used for bioethanol production using Kluyveromyces marxianus. Maximum lignolytic enzyme production was obtained with 15 µg/L of NiO nanoparticles and initial pH of 5 at 32 °C. Subsequently, about 54% of lignin degradation was achieved after 192 h. Hydrolytic enzymes showed elevated enzyme activity and resulted in 84.52 ± 3.5 g/L of total reducing sugar at 15 µg/mL NiO NPs. About 14.65 ± 1.75 g/L of ethanol was produced using K. marxianus after 24 h. Thus, dual strategy employed for conversion of elephant grass biomass into fermentable sugar and subsequent biofuel production could become potential platform for commercialization.

Use of Yarrowia lipolytica to Obtain Fish Waste Functional Hydrolysates Rich in Flavoring Compounds

Fishery processing industries generate large amounts of by-products. These by-products come from fish heads, skin, bones, thorns, and viscera. The disposal of these wastes represents an increasing environmental and health problem. Nowadays, there is a growing interest in how to utilize fish materials that are not used for human consumption. Among the different solutions proposed, the use of proteolytic and lipolytic microorganisms represents a green solution for waste valorization. In this work, first we screened several conventional and non-conventional microorganisms for their proteolytic and lipolytic functions. Then, the most promising strains (Yarrowia lipolytica YL2, Y. lipolytica YL4, Bacillus amyloliquefaciens B5M and B. subtilis B5C) were tested on a fish waste-based solution. After 72 h incubation at room temperature, the supernatants obtained using the strains of Y. lipolytica showed the highest degree of hydrolysis (10.03 and 11.80%, respectively, for YL2 and YL4), the strongest antioxidant activity (86.4% in DPPH assay for YL2) and the highest formation of aldehydes (above 50% of the total volatile compounds detected). Hydrolysates of fish waste obtained with Y. lipolytica may be reused in feed and food formulations for their functional and flavoring characteristics.

A co-fermentation strategy with wood hydrolysate and crude glycerol to enhance the lipid accumulation in Rhodosporidium toruloides-1588

Wood hydrolysate has been regarded as sustainable and renewable substrate to produce microbial lipids, a potential feedstock for the biodiesel industry. Moreover, the major by-product of biofuel industries is crude glycerol but its implementation as a carbon source is still constrained due to the presence of impurities resulting in low biomass production and low lipid titer. Thus, this study investigates the effect of different carbon ratios of hydrolysate and crude glycerol on R. toruloides-1588. Hydrolysate to crude glycerol ratio of 60:40 resulted in maximum lipid accumulation of 49% (w/w), more than 90% of sugars and glycerol consumption. Further, scale-up to bench-scale fermenter resulted in 12% higher lipid accumulation (56.3% w/w, 0.15 g/L∙h) in 50% less time than flask fermentation. Hence, the ability of R. toruloides-1588 to flourish on different carbohydrates and accumulate high lipid content will be beneficial for the further development of biorefinery industries.

A review on physico-chemical delignification as a pretreatment of lignocellulosic biomass for enhanced bioconversion

Effective pretreatment of lignocellulosic biomass (LCB) is one of the most important steps in biorefinery, ensuring the quality and commercial viability of the overall bioprocess. Lignin recalcitrance in LCB is a major bottleneck in biological conversion as the polymerization of lignin with hemicellulose hinders enzyme accessibility and further bioconversion to fuels and chemicals. Therefore, there is a need to delignify LCB to ease further bioprocessing. The efficiency of delignification, quality and quantity of the desired products, and generation of inhibitors depend upon the type of pretreatment employed. This review summarizes different single and integrated physicochemical pretreatments for delignification. Additionally, conditions required for effective delignification and the advantages and drawbacks of each method were evaluated. Advances in overcoming the recalcitrance of residual lignin to saccharification and the methods to recover lignin after delignification are also discussed. Efficient lignin recovery and valorization strategies provide an avenue for the sustainable lignocellulose biorefinery.

Engineering Yarrowia lipolytica to produce advanced biofuels: Current status and perspectives

Energy security and global climate change have necessitated the development of renewable energy with net-zero emissions. As alternatives to traditional fuels used in heavy-duty vehicles, advanced biofuels derived from fatty acids and terpenes have similar properties to current petroleum-based fuels, which makes them compatible with existing storage and transportation infrastructures. The fast development of metabolic engineering and synthetic biology has shown that microorganisms can be engineered to convert renewable feedstocks into these advanced biofuels. The oleaginous yeast Yarrowia lipolytica is rapidly emerging as a valuable chassis for the sustainable production of advanced biofuels derived from fatty acids and terpenes. Here, we provide a summary of the strategies developed in recent years for engineering Y. lipolytica to synthesize advanced biofuels. Finally, efficient biotechnological strategies for the production of these advanced biofuels and perspectives for future research are also discussed.

Engineering Yarrowia lipolytica to produce fuels and chemicals from xylose: A review

The production of chemicals and fuels from lignocellulosic biomass has great potential industrial applications due to its economic feasibility and environmental attractiveness. However, the utilized microorganisms must be able to use all the sugars present in lignocellulosic hydrolysates, especially xylose, the second most plentiful monosaccharide on earth. Yarrowia lipolytica is a good candidate for producing various valuable products from biomass, but this yeast is unable to catabolize xylose efficiently. The development of metabolic engineering facilitated the application of Y. lipolytica as a platform for the bioconversion of xylose into various value-added products. Here, we reviewed the research progress on natural xylose-utilization pathways and their reconstruction in Y. lipolytica. The progress and emerging trends in metabolic engineering of Y. lipolytica for producing chemicals and fuels are further introduced. Finally, challenges and future perspectives of using lignocellulosic hydrolysate as substrate for Y. lipolytica are discussed.

Effect of creating a fed-batch like condition using carbon to nitrogen ratios on lipid accumulation in Rhodosporidium toruloides-1588

Utilizing the undetoxified wood hydrolysate to accumulate maximum lipids in Rhodosporidium toruloides under optimum conditions has been regarded as a renewable and cost-effective strategy. The current investigation aims to identify the best carbon to nitrogen (C/N 20, 70, and 120) ratio for maximum lipid accumulation in R. toruloides-1588 using wood hydrolysate. Additionally, a fed-batch-like condition was employed, where C/N ratios were maintained during the fermentation that inherently decreases in batch fermentation. The C/N ratio 70 has been identified as the best condition with 3 times higher lipid accumulation (43% w/w) than the control. Additionally, >95% and 70% of glucose and xylose consumption were observed, respectively. Moreover, 50% increase in polyunsaturated fatty acids compared to the control media reinforced the potential of R. toruloides-1588 to thrive on undetoxified hydrolysate, high lipid productivity (3.8 mg/g of dry weight per hour) and produce high value monosaturated and polyunsaturated fatty acids.