A metagenomic view of how different carbon sources enhance the aniline and simultaneous nitrogen removal capacities in the aniline degradation system

CeO2@Co3O4-decorated carbon felt anode with mesoporous nanoparticles for enhanced POM wastewater treatment and electricity generation in microbial fuel cells

Microbial fuel cells (MFCs) have been widely used in the treatment of organic wastewater because of its advantages of high efficiency, environmental friendliness, and no secondary pollution. In this study, we developed a composite anode, CeO2@Co3O4-PEDOT/CF (PEDOT: poly(3,4-ethylenedioxythiophene), CF: carbon felt), by incorporating bimesoporous CeO2@Co3O4 nanoparticles and PEDOT layer. The MFCs equipped with this novel anode had demonstrated exceptional catalytic performance in the treatment of Polyoxymethylene (POM) wastewater. Specifically, it achieved a 74.9 % increase in output voltage (586 ± 23 mV), a 2.5-fold increase in power density (3564 ± 27 mW/m2), and enhancements of 41.8 %, 40.1 %, and 47.0 % in the degradation rates of formaldehyde (HCHO, 97.2 %), 1,3,5-trioxane (TOX, 93.6 %), and chemical oxygen demand (COD) removal efficiency (84.4 %), respectively, when compared to a bare CF anode. Furthermore, the MFC with the composite anode demonstrated high degradation efficiency and COD removal efficiency across various industrial water environments. Additionally, the wheat seed germination experiments indicated a significant reduction in the toxicity of the degraded solution. This enhanced performance could be attributed to the synergistic effects of the bimesoporous CeO2@Co3O4 nanoparticles and the PEDOT layer. This study presents a promising strategy for the degradation of organic pollutants and the generation of bioelectricity in practical applications.

Carbon source driven microbial ecological behaviors achieving efficient synchronous elimination of nitrogen and sulfamethoxazole within MABR

As carbon source shaped microbial ecosystem, the limited information on microbial ecological behaviors and ecological interrelationships between nitrogen and antibiotics metabolism under carbon source blocked the achievement of efficient synchronous nitrogen and antibiotics removal. Four typical carbon sources were selected to investigate their impact on nitrogen and sulfamethoxazole (SMX) metabolism in a membrane-aerated biofilm reactor (MABR) system. Detailed ecological insights were obtained, including degradation pathways, microbiota composition, functional genes, and microbial interactions. The microbial community's carbon source preferences related to nitrogen and SMX metabolism, as well as their interrelationships under different carbon sources, were elucidated. Specifically, sucrose, providing a "gradual-releasing" energy source, promoted the abundance of Chryseobacterium and Paenarthrobacter, which facilitated the cleavage of the S-N bond in SMX and generated more small-molecule metabolites, enhancing SMX removal. Acetate, serving as a "first aid" energy source, resulted in multiple nitrogen metabolic pathways, leading to efficient nitrogen removal. Further, ecological networks revealed that sucrose caused superior SMX removal by enhancing metabolites cross-feeding between keystone N-cycling microbes (e.g., Paracoccus, Bdellovibrio) and keystone SMX degraders (e.g., Mycobacterium, Nocardioide), while acetate induced excellent nitrogen removal as it resulted in intensive complexity and connectivity within microbial ecosystem. Structural equation models (SEMs) analysis confirmed the dominant contribution of ecological networks complexity and cross-feeding on nitrogen and SMX removal than other ecological features. Based on fundamental insights, it was demonstrated that the acetate and sucrose mixture achieved more efficient SMX and nitrogen removal.

Removal performance and mechanism of aniline from landfill leachate by ozone oxidation process using iron-based packed catalyst

Aniline in landfill leachate was used as a target pollutant and treated by a catalytic ozonation process (COP). The catalyst was based on waste iron shavings, which were oxidatively modified to form an iron-based ozonation catalyst (FOC), and subsequently compressed into an iron-based packing for catalyzing the ozonolysis of aniline (FCOP). The special porous structure of the compressed packing material enhanced the decomposition of O3. FCOP achieved 93% removal of aniline from the simulated wastewater, which was significantly better than the ozonation alone process (OOP). At low pH (<3), the removal of aniline relied on the endo-Fenton mechanism due to the presence of Fe2+ and H2O2. At high pH (>5), aniline was removed by the COP mechanism. At the FOC surface, electron transfer facilitated ozonolysis to produce •OH radicals, which simultaneously produced Fe2+ oxidation and Fe3+ reduction, establishing a redox cycle. The main role of -OH in the FCOP system and the aniline degradation pathway were determined using EPR and related techniques. FCOP is a cost-effective and environmentally friendly process that can be used to treat aniline in the future.

Combined toxicity of Cd and aniline to soil bacteria varying with exposure sequence

Joint toxicity of organic-metal co-contamination can vary depending on organisms, toxicants, and even the sequence of exposure. This study examines how the combined toxicity of aniline (An) and cadmium (Cd) to soil bacteria in microcosms changes when the order of contaminant introduction is altered. Through analyzing biodiversity, molecular ecological network, functional redundancy, functional genes and pathways, we find the treatment of Cd followed by An brings about the strongest adverse impact to the bacterial consortium, followed by the reverse-ordered exposure and the simple mixture of the two chemicals. On the level of individual organisms, exposure sequence also affects the bacteria that are otherwise resistant to the standalone toxicity of both An and Cd. The dynamic behavior of aniline-cadmium composite is interpreted by considering the tolerance of organisms to individual chemicals, the interactions of the two toxicants, the recovery time, as well as the priority effect. The overall effect of the composite contamination is conceptualized by treating the chemicals as environmental filters screening the growth of the community.

Advancing the treatment of low carbon-to-nitrogen ratio municipal wastewater using a novel microaerobic sludge bed approach: Insights into enhanced performance and functional microbial community

Microaerobic sludge bed systems could align with low-energy, reasonable carbon-nitrogen (C/N) ratio, and synchronous removal objectives during wastewater treatment. However, its ability to treat municipal wastewater (MW) with varying low C/N ratio, low NH4+ concentration, along with managing sludge bulking and loss are still unclear. Against this backdrop, this study investigated the performance of an Upflow Microaerobic Sludge Bed Reactor (UMSR) treating MW characterized by varying low C/N ratios and low NH4+ concentrations. The study also thoroughly examined associated sludge bulking and loss, pollutant removal efficiencies, sludge settleability, microbial community structures, functional gene variations, and metabolic pathways. Findings revealed that the effluent NH4+-N concentration gradually decreased to 0 mg/L with a decrease in the C/N ratio, whereas the effluent COD was unaffected by the influent, maintaining a concentration below 50 mg/L. Notably, TN removal efficiency reached 90% when C/N ratio was 3. The decrease in the C/N ratio (C/N ratio was 1) increased microbial community diversity, with abundances of AOB, AnAOB, aerobic denitrifying bacteria, and anaerobic digestion bacteria reaching 8.34%, 0.96%, 5.07%, and 9.01%, respectively. Microorganisms' metabolic pathways significantly shifted, showing increased carbohydrate and cofactor/vitamin metabolism and decreased amino acid metabolism and xenobiotic biodegradation. This study not only provides a solution for the effluent of different pre-capture carbon processes but also demonstrates the UMSR's capability in managing low C/N ratio municipal wastewater and emphasizes the critical role of microbial community adjustments and functional gene variations in enhancing nitrogen removal efficiency.

Elucidating the roles of Cr(VI)-Cu(II) Co-pollution in the stress of aniline degradation stress: Insights into metabolic pathways and functional genes

In order to examine the impact of Cu(II)-Cr(VI) co-pollution in printing and dyeing wastewater on the aniline biodegradation system (ABS), loading experiments were conducted on ABS at varying concentrations of Cu(II)-Cr(VI). The synergistic stress imposed by Cu(II)-Cr(VI) accelerated the deterioration of the systems, with only the C2-3 (2 mg/L Cr(VI)-3 mg/L Cu(II)) sustaining stable operation for 42 days. However, its nitrogen removal performance remained significantly impaired, resulting in a total nitrogen (TN) removal rate below 40%. High-throughput sequencing analysis revealed a stronger correlation between Cr(VI) and microbial diversity compared to Cu(II). Metagenomic sequencing results demonstrated that Cu(II) emerged as the dominant factor influencing the distribution of dominant bacteria in C2-3, as well as its contribution to contaminant degradation. The complex co-pollution systems hindered aniline degradation and nitrogen metabolism through the combined bio-toxicity of heavy metals and aniline, thereby disrupting the transport chain within the systems matrix.

Micro-aeration assisted with electrogenic respiration enhanced the microbial catabolism and ammonification of aromatic amines in industrial wastewater

Improvement of refractory nitrogen-containing organics biodegradation is crucial to meet discharged nitrogen standards and guarantee aquatic ecology safety. Although electrostimulation accelerates organic nitrogen pollutants amination, it remains uncertain how to strengthen ammonification of the amination products. This study demonstrated that ammonification was remarkably facilitated under micro-aerobic conditions through the degradation of aniline, an amination product of nitrobenzene, using an electrogenic respiration system. The microbial catabolism and ammonification were significantly enhanced by exposing the bioanode to air. Based on 16S rRNA gene sequencing and GeoChip analysis, our results indicated that aerobic aniline degraders and electroactive bacteria were enriched in suspension and inner electrode biofilm, respectively. The suspension community had a significantly higher relative abundance of catechol dioxygenase genes contributing to aerobic aniline biodegradation and reactive oxygen species (ROS) scavenger genes to protect from oxygen toxicity. The inner biofilm community contained obviously higher cytochrome c genes responsible for extracellular electron transfer. Additionally, network analysis indicated the aniline degraders were positively associated with electroactive bacteria and could be the potential hosts for genes encoding for dioxygenase and cytochrome, respectively. This study provides a feasible strategy to enhance nitrogen-containing organics ammonification and offers new insights into the microbial interaction mechanisms of micro-aeration assisted with electrogenic respiration.

Retrospect and prospect of aerobic biodegradation of aniline: Overcome existing bottlenecks and follow future trends

Aniline is a highly bio-toxic industrial product, even at low concentrations, whose related wastewater has been flowing out worldwide on a large scale along with human production. As a green technology, aerobic biological treatment has been widely applied in industrial wastewater and exhibited various characteristics in the field of aniline wastewater. Meanwhile, this technology has shown its potential of synchronous nitrogen removal, but it still consumes energy badly. In the face of resource scarcity, this review comprehensively discusses the existing research in aerobic biodegradation of aniline wastewater to find out the developmental dawn of aerobic biological treatment. Primarily, it put forward the evolution history details of aniline biodegradation from pure culture to mixed culture and then to simultaneous nitrogen removal. On this basis, it presented the existing challenges to further expand the application of aerobic biotechnology, including the confusions of aniline metabolic mechanism, the development of co-degradation of multiple pollutants and the lack of practical experience of bioreactor operation for aniline and nitrogen removal. Additionally, the prospects of the technological shift to meet the needs of an energy-conserving society was described according to existing experiences and feasibility. Including but not limiting to the development of multifunctional bacteria, the reduction of greenhouse gases and the combination of green technologies.

Simultaneous nitrification and denitrification in a novel rotating self-aerated biofilm reactor for decentralized wastewater treatment

Decentralized wastewater pollution in rural areas has become a serious problem for the rural environment. In this study, a novel rotating self-aerated biofilm reactor was developed for decentralized wastewater treatment without any aeration equipment. After the long-term operation of 110 days, the removal efficiency reached to 96.06 % (COD), 98.06 % (NH₄⁺-N), and 62.58 % (TN) in the last phase. Under high dissolved oxygen level, the simultaneous nitrification-denitrification (SND) maintained at a stable ratio of 62.53 % and the denitrification rates reached over 28.37 mg/L/h. With the organic loading rate increased, key nitrogen functional bacterial communities such as anoxic denitrifiers (Thiothrix, Flavobacterium, Pseudoxanthomonas, Aquimonas and Azoarcus) and aerobic denitrifiers (Hydrogenophaga, Zoogloea and Terrimonas) increased obviously. Overall, microbial analysis and nitrogen metabolism pathway indicated that an integration of SND process was achieved in this single reactor by the combined action of nitrification, denitrification and comammox without any aeration equipment.

Application of spray-dried erythromycin fermentation residue as a soil amendment: antibiotic resistance genes, nitrogen cycling, and microbial community structure

Erythromycin fermentation residue (EFR) after spray drying could be reused as a soil amendment. However, the effects of spray-dried EFR on antibiotic resistance genes (ARGs), nitrogen cycling, and microbial community structure in soil are rarely reported. In this study, a pot experiment was conducted by adding spray-dried EFR to soil. For the application of 1.0% spray-dried EFR, the residual erythromycin (ERY) could be rapidly removed with the half-life of 22.2 d; the total relative abundance of ARGs increased at first, but decreased to the initial level of the control group in the end; genes related to ammonium assimilation (glnA, gltB, gltD), ammonification (gdhA, gudB, cynT, cynS, ncd2), denitrification (narI, narG, narH), assimilatory nitrate reduction (nirA, nasA), and dissimilatory nitrate reduction (nirD) were enriched; soil microbial community structure presented temporary variation. Network analysis showed significant negative correlations between ARGs and nitrogen cycling genes. The addition of 6.0% spray-dried EFR resulted in the amplification of ARGs and inhibition of nitrogen cycling. This work provides new insights into the effects of spray-dried EFR on ARGs, nitrogen cycling, and microbial community structure within the fertilized soil.

Metagenome analyses of microbial population in geotextile fabrics used in permeable reactor barriers for toluene biodegradation

Toluene is one of the hydrocarbons that contaminate soil and groundwater, and has a high cost to remediate, which makes it an environmental pollutant of concern. This study aimed to find bacterial distribution from nonwoven geotextile (GT) fabric specimens in a pilot-scale permeable reactive barrier (PRB). Upon 167 days of incubation with the addition of toluene, the microbial community on the GT surfaces (n = 12) was investigated by the 16S rRNA metagenome sequencing approach. According to taxonomic classification, the Proteobacteria phylum dominated the metagenomes of all the geotextile samples (80-90%). Kyoto Encyclopedia of Genes and Genomes (KEGG) Pathway database search of the toluene degradation mechanism revealed the susceptible toluene-degrading species. For the toluene-to-benzoate degradation, the Cupriavidus genus, particularly C. gilardii, C. metallidurans, and C. taiwanensis, are likely to be functional. In addition to these species, the Novosphingobium genus was abundantly localized in the GTs, in particular Novosphingobium sp. ABRDHK2. The results suggested the biodegradation potential of these species in toluene remediation. Overall, this work sheds light on the variety of microorganisms found in the geotextile fabrics used in PRBs and the species involved in the biodegradation of toluene from several sources, including soil, sediment, and groundwater.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03460-y.

The changing C/N of aggressive aniline: Metagenomic analysis of pollutant removal, metabolic pathways and functional genes

In order to optimize the degradation of high-concentration aniline wastewater, the operation of sequencing batch bioaugmentation reactors with different aniline concentrations (200 mg/L, 600 mg/L, 1000 mg/L) was studied. The results showed that the removal rates of aniline and COD in the three reactors could reach 100%. When the aniline increased to 600 mg/L, the nitrogen removal efficiency reached the peak (51.85%). The increase of aniline inhibited the nitrification, while denitrification was enhanced due to the increase of C/N ratio. But this change was reversed by the toxicity of high concentrations of aniline. The metagenomic analysis showed that when the aniline concentration was 600 mg/L, the abundance distribution of microbial samples was more uniform. The improved of aniline concentration had led to the increase of aromatic compounds degradation metabolic pathways. In addition, the abundance of aniline degradation and nitrogen metabolism genes (dmpB, xylE, norB) was also promoted.

Exploring the impact of intensity and duration of Cu (II) depression on aniline-degrading biosystem: Performance, sludge activity and microbial diversity

To evaluate the ecological risk of aniline wastewater biodegradation, the aniline wastewater (200 mg/L) was treated in this work under the stress of Cu (II) at 3, 6 and 10 mg/L, respectively. The slight fluctuation of aniline-degrading performance and the significant inhibition of nitrogen removal was caused by the Cu (II) stress at below 6 mg/L. Meanwhile, the tolerance of nitrifying performance to Cu (II) was higher than denitrifying. The collapse of biosystem was caused by the Cu (II) stress at 10 mg/L and the decontamination function was disabled within 8 days. The activity and stability of sludge declined under the increase of Cu (II) content. Microbial diversity results demonstrated that the genera with heavy-metal tolerance represented by Zoogloea and Azospira significantly dominated under the continuously Cu (II) stress. Whereas, the biosystem with these dominant genera did not achieve the comparable aniline and nitrogen removal performance as the control group.

Anoxic/oxic treatment without biomass recycle

The Anoxic/Oxic (A/O) process involves recirculating mixed liquor between its A and O tanks so that nitrate produced in the O tank can be used to for denitrification with influent COD in the A tank. Because biomass is recirculated along with nitrate, A/O operation leads to similar microbial communities in the A and O tanks, which may decrease the rates of denitrification and nitrification in each tank. Here, bench-scale experiments simulated this aspect of the A/O process by exchanging biomass between an anoxic flask and an oxic cylinder at exchange ratios of 0%, 20%, 30%, and 50%. Nitrification and denitrification rates were only 40% and 19% for 50% biomass exchange of that for no biomass exchange. Phylogenetic analysis documented that the microbial communities became much more similar with biomass exchange, and the finding was consistent with community composition in a full-scale A/O process in a municipal wastewater treatment plant. A two-stage vertical baffled bioreactor (VBBR) realized efficient total‑nitrogen removal in recirculation without biomass exchange. Average removals of COD and TN were respectively 6% and 22% higher for the two-stage VBBR than the conventional A/O process, but its hydraulic retention time (HRT) was 55% to 70% of the volume of a conventional A/O process treating the same influent wastewater. The VBBR was more efficient because its anoxic biofilm was enriched in denitrifying bacteria, while its oxic biofilm was enriched in nitrifying bacteria. For example, the phylum Chloroflexi was greater in the An-VBBR, while the phylum Proteobacteria was greater in the Ox-VBBR.

Transfer of functional microorganism: Regulation of N-acyl-homoserine lactones on the microbial community in aniline-degrading sequencing batch biofilm reactor

Due to the inhibition of nitrification from aniline toxicity, exogenous N-acyl-homoserine lactones (AHLs) addition was attempted to enhance nitrogen removal in this work. Two sequencing batch biofilm reactors (SBBRs): S1 (the control) and S2 (C6-HSL and 3-oxo-C8-HSL dosing) were used to treat aniline wastewater. The NH₄⁺-N and TN removal rates of S2 were 42.50% and 26.99% higher than S1 in the aerobic phase, respectively. It revealed the nitrogen removal performance of S2 much better than S1. High-throughput sequencing results indicated that many nitrifiers and denitrifiers of S2, such as Nitrosomonas and Thauera, transferred from sludge to biofilm significantly and built closer relationships each other. Overall, main nitrogen removal was contributed by biofilm rather than sludge with the regulation of AHLs. A mild and collaborative environment of biofilms for microorganisms enhanced nitrogen removal. The work provided a new idea for reconciling the contradiction between nitrification and denitrification in aniline wastewater treatment.

An attempt to stimulate aniline degrading bioreactor by exogenous auto-inducer: Decontamination performance, sludge characteristics, and microbial community structure response

To break the contradiction between aniline and nitrogen metabolism in activated sludge reactor by influencing microbial interspecific communication, Auto-inducer C6-HSL and 3-oxo-C8-HSL were selected in this study to interfere with aniline degradation system. The two Auto-inducers enhanced the aniline degradation rate and ammonia removal efficiency of the systems, especially C6-HSL. Meanwhile, the main ammonia removal way was assimilation. Exogenous Auto-inducer effectively stabilized the sludge structure and activity from the destruction of aniline, and promoted EPS secretion. Microbial diversity analysis showed that most of functional microflora of seed sludge gradually deactivated with the operation of the reactor, while Rhodococcus, Leucobacter, g_norank_f_Saprospiraceae proliferated wildly under the action of Auto-inducer. Additionally, the interspecific relationship also demonstrated a different trend. Exogenous Auto-inducer was proved to exert positive effects on aniline degradation system to a certain extent, providing new insights in the field of aniline wastewater bio-degradation.

Control of aeration time in the aniline degrading-bioreactor with the analysis of metagenomic: Aniline degradation and nitrogen metabolism

The strategy of adjusting aeration time (5 h/6 h/7 h) was applied to the sequential batch reactors to optimize the treatment of aniline wastewater (600 mg/L) conveniently and economically. Three reactors degraded aniline effectively. The nitrogen removal ability of system with 6 h aeration time was better, performing the similar denitrification property as 5 h and nitrification performance as 7 h. Meanwhile, longer aeration time potentially damaged the sludge structure. The metagenomic analysis explained the micro-mechanism for the better performance of the system with 6 h aeration time. Appropriate aeration time was conducive to the enrichment of synergistic microflora, including aniline degrading-bacteria, heterotrophic nitrifiers and denitrifiers. Then, the tilt of environmental resources to these floras in the system was beneficial to the maximum value utilization of living substrates. Accordingly, these bacteria were more closely related to genes, resulting in higher expression of functional genes in the system.

Understanding the impacts of operation mode sequences on the biological aniline degradation system: Startup phase, pollutants removal rules and microbial response

Comparative evaluation of SBRs under different modes (AX/O, AN/AX/O, AN/O/AX, O/AX) with same aniline wastewater arrangements, presenting the startup and performance differences of reactors. The results revealed that the four systems realized the efficient aniline and NH₄⁺-N removal on the basis of sufficient aerobic time. Anaerobic aniline degradation was also achieved in the first three reactors after acclimation. The denitrification efficiency was the highest in O/AX reactor and the lowest in AN/O/AX due to mode sequence setup. Pollutants variations in the typical cycles experimental data combined with microbial diversity analysis were highlighted that aerobic denitrification contributed the most under O/AX mode, while the other three modes relied on anoxic denitrification. Meanwhile, low nitrifiers and aerobic denitrifiers abundance might be another reason for the poor denitrification of AN/O/AX mode. It was inferred that denitrification was most susceptible to operation mode sequences.

Spatial Variation of Cladophora Epiphytes in the Nan River, Thailand

Cladophora is an algal genus known to be ecologically important. It provides habitats for microorganisms known to provide ecological services such as biosynthesis of cobalamin (vitamin B12) and nutrient cycling. Most knowledge of microbiomes was obtained from studies of lacustrine Cladophora species. However, whether lotic freshwater Cladophora microbiomes are as complex as the lentic ones or provide similar ecological services is not known. To illuminate these issues, we used amplicons of 16S rDNA, 18S rDNA, and ITS to investigate the taxonomy and diversity of the microorganisms associated with replicate Cladophora samples from three sites along the Nan River, Thailand. Results showed that the diversity of prokaryotic and eukaryotic members of Cladophora microbiomes collected from different sampling sites was statistically different. Fifty percent of the identifiable taxa were shared across sampling sites: these included organisms belonging to different trophic levels, decomposers, and heterotrophic bacteria. These heterogeneous assemblages of bacteria, by functional inference, have the potential to perform various ecological functions, i.e., cellulose degradation, cobalamin biosynthesis, fermentative hydrogen production, ammonium oxidation, amino acid fermentation, dissimilatory reduction of nitrate to ammonium, nitrite reduction, nitrate reduction, sulfur reduction, polyphosphate accumulation, denitrifying phosphorus-accumulation, and degradation of aromatic compounds. Results suggested that river populations of Cladophora provide ecologically important habitat for microorganisms that are key to nutrient cycling in lotic ecosystems.