Microbial production of lactic acid from food waste: Latest advances, limits, and perspectives

Effects of different types of municipal solid waste incineration slag on landfill stabilization and related microbiological mechanism

Municipal solid waste incineration slag has the potential to accelerate the stabilization of landfills, but the effects of key slag components (i.e., alkaline substances and ferromagnetic substances) on the landfilling process have not been systematically studied. Therefore, landfill bioreactors containing different types of incineration slag, including a control group (CK), raw slag (RS), iron-rich slag (FM), and alkali-rich slag (AL), mixed with refuse at 5% and 10% ratios, were established. The results showed that the addition of RS was superior than FM and AL in accelerating refuse degradation, and the degree of stabilization was significantly better at a high slag addition ratio (10%) than at a low ratio (5%). Addition of 10% RS was most effective in DOM removal in the leachate, which was mainly because the raw slag had a high content of alkaline substances (46.78%) and a relatively low content of ferromagnetic substances (7.01%). The addition of RS and AL increased the bacterial population in the early and middle stages of landfilling, but the addition of 10% FM resulted in a decrease in bacterial population. The dominant genus was Lactobacillus in the early stage of landfilling, while Clostridium and Petrimonas were the dominant genera in the late and final stages of landfilling in the slag addition systems, and alkaline substances played a vital role in the succession of bacterial community. The addition of slag promoted the abundance of amino acid metabolism and carbohydrate metabolism pathways involved in refuse degradation.

Fermentative lactic acid production from Sotol bagasse (Dasylirion spp.): Optimization of microwave-assisted biomass pre-treatment

The valorization of industrial byproducts is a crucial step towards sustainable production. Sotol bagasse, a lignocellulosic residue from Sotol spirit production, is a promising feedstock for biorefineries. This study aimed to optimize microwave-assisted pre-treatment of sotol bagasse biomass for fermentative lactic acid production using a microbial consortium from cow manure. Microwave irradiation was employed to hydrolyze the complex structure of the Sotol bagasse, releasing fermentable sugars. Notably, these pre-treatments were more selective than traditional acid hydrolysis, minimizing the formation of inhibitory compounds like hydroxymethylfurfural. Instead, microwave pre-treatments promoted levulinic acid formation through autohydrolysis driven by steam explosions, a valuable chemical platform for various industrial applications. The optimal microwave pre-treatment conditions that led to almost pure glucose attaining a 3 % w/w efficiency in converting lignocellulose to glucose resulted in a maximum lactic acid production of 9.6 g/L. This study demonstrates the potential of Sotol bagasse as a sustainable feedstock for lactic acid production, contributing to a more circular economy.

Enhancing methane production in two-phase anaerobic digestion of perishable organic waste: Mini-review on acidogenic fermentation pathways and regulatory strategies

Two-phase anaerobic digestion is a highly effective approach for efficient reduction and resource recovery of perishable organic waste. Within this technological framework, organic wastes undergo multiple metabolic pathways during the acidogenic phase, which is classified into ethanol, butyrate, propionate, lactate, and mixed acid fermentation depending on the acidification end products. The nature of these acidification products critically influences the performance of the subsequent methanogenic phase. Strategic regulation of operational parameters during the acidogenic phase fosters the enrichment of specific microbial communities and establishment of dominant consortia, which enable the production of the targeted acidification end-products. This review provides a comprehensive analysis of the metabolic characteristics and regulatory strategies associated with various acidogenic fermentation types and methanogenic properties of different acidification products. The findings presented here are crucial for enhancing the stability and methanogenic efficiency of anaerobic digestion systems that process perishable organic waste.

Food, Health, and Environmental Impact of Lactic Acid Bacteria: The Superbacteria for Posterity

Lactic acid bacteria (LAB) are Gram-positive cocci or rods that do not produce spores or respire. Their primary function is to ferment carbohydrates and produce lactic acid. The two primary forms of LAB that are currently recognized are homofermentative and heterofermentative. This review discusses the evolutionary diversity and the biochemical and biophysical conditions required by LAB for their metabolism. Next, it concentrates on the applications of these bacteria in gut health, cancer prevention, and overall well-being and food systems. There are numerous uses for LAB, including the food and dairy sectors, as probiotics to improve human and animal gut-health, as anti-carcinogenic agents, and in food safety as biopreservatives, pathogen inhibitors, and reducers of anti-nutrients in foods. The group included many genera, including Aerococcus, Carnobacterium, Enterococcus, Lactobacillus, Lactococcus, Leuconostoc, Streptococcus, Tetragenococcus, Vagococcus, and Weissella. Numerous species of Lactobacillus and Bifidobacterium genera as well as other microbes have been suggested as probiotic strains, or live microorganisms added to meals to improve health. LAB can colonize the intestine and take part in the host's physiological processes. This review briefly highlights the role of these bacteria in food safety and security as well as aspects of regulation and consumer acceptance. Finally, the recent innovations in LAB fermentations and the limitations and challenges of the applications of LAB in the food industry are discussed. Notwithstanding recent developments, the study of LAB and their functional components is still an emerging topic of study that has not yet realized its full potential.

Enhanced phosphorus release from pig manure by co-fermentation with food waste

Animal manure is considered to have great potential for phosphorus (P) recovery due to its high P content, while P recovery is limited by the transfer of P from the solid phase to the liquid phase. The conventional dissolution process by adding chemical acid reagents is not economically feasible for animal manure. This study used food waste (FW) as a co-substrate for the anaerobic fermentation of pig manure (PM) to achieve the release of P. The operational parameters were optimized, and the mechanisms of acidification and P release were further studied. The results showed FW promoted lactic acid production and rapid acidification. As FW increased from 0 to 80%, the concentrations of lactic acid rose from 0.12 ± 0.04 to 11.95 ± 1.37 g/L, with pH decreasing from 7.55 to 4.43. The ratio with FW/PM = 1:2 was the optimal condition, which led to the highest soluble phosphate concentration (350.39 ± 8.59 mg/L) in 72 h, with a TP release rate of 74.24 ± 1.81%. Multiple regression analyses established key relationships to predict pH changes in the reactor.

Valorization of Xylose-Rich Medium from Cynara cardunculus Stalks for Lactic Acid Production via Microbial Fermentation

Lactic acid (LA) is a versatile, optically active compound with applications across the food, cosmetics, pharmaceutical, and chemical industries, largely driven by its role in producing biodegradable polylactic acid (PLA). Due to its abundance, lignocellulosic biomass is a promising and sustainable resource for LA production, although media derived from these matrices are often rich in xylose and contain growth inhibitors. This study investigates LA production using a xylose-rich medium derived from Cynara cardunculus L. altilis DC stalks treated through steam explosion and enzymatic hydrolysis. The lactic acid bacteria strains Lacticaseibacillus casei, Paucilactobacillus vaccinostercus, and Pediococcus pentosaceus were grown on natural media, achieving yields of 0.59, 0.57, and 0.58 g LA/g total carbon consumed, respectively. Remarkably, on xylose-rich media, all supplied sugar was consumed, with LA yields comparable to those on complex media. These findings highlight the adaptability of these strains in the presence of inhibitors and support the potential of lignocellulosic biomass as a low-cost and sustainable substrate for effective PLA production.

Effect of acidification pretreatment on two-phase anaerobic digestion of acidified food waste

Acidified food waste significantly disrupts anaerobic digestion, highlighting the need for effective solutions to mitigate its impact. This study presents a method that utilizes acidified sludge to pretreat acidified food waste, thereby significantly improving the efficiency of hydrolysis and acidogenesis. After acidification pretreatment, hydrolysis efficiency improved from 64.54 % to 96.51 %, while acidogenesis efficiency increased from 34.82 % to 49.95 %. Additionally, the concentration of short-chain fatty acids and hydrogen production in the acidification pretreatment group increased by 45.89 % and 48.67 %, respectively. The pretreatment group exhibited a biochemical methane potential of 512.84 ± 13.73 mL/(g volatile suspended solids), which was 35.77 % higher than that of the control group. Mechanism analysis revealed that the higher abundance of genes associated with lactate dehydrogenase in the acidified sludge facilitated the rapid degradation of lactic acid. Moreover, the abundant Clostridium butyricum in the acidified sludge promoted the targeted conversion of lactic acid and other organic matter into butyric acid within the food waste system. This efficient butyric acid fermentation improved the fermentation environment and provided abundant substrates for methane production. This study introduces a promising bio-based strategy to improve the anaerobic digestion efficiency of acidified food waste.

A novel approach to enhance high optically active L-lactate production from food waste by landfill leachate

The recycling of food waste (FW) through anaerobic fermentation into lactic acid (LA), with two isomers L-LA and D-LA, aligns with the principles of a bio-based circular economy. However, FW fermentation is often limited by competing pathways, acidification inhibition, and trace metals deficiency. This study investigates the introduction of landfill leachate, containing buffering agents (ammonia) and trace metals, into FW fermentation. Various dosages of landfill leachate, ranging from 90 (LN-90) to 450 mg/L (LN-450) based on inclusive ammonia calculation, were employed. Results showed that LA production peaked at 43.65 ± 0.57 g COD/L in LN-180 on day 6, with a high optical activity of L-LA at 92.40 ± 1.15 %. Fermentation pathway analysis revealed that landfill leachate amendment enhances hydrolysis (as evidenced by increased activity of amylase, α-glucosidase, and protease) and glycolysis (resulting in enhanced utilization of carbohydrates and glucose). The inclusive ammonia in leachate plays a crucial role as a buffer, maintaining optimal pH conditions (5-7), thereby reducing volatile fatty acid production and thus intensifying LA orientations. The increased activity of L-lactate dehydrogenase (L-LA generation) and decreased NAD-independent lactate dehydrogenase (LA consumption) in properly dosed leachate further explained the high accumulation of L-LA. Dominance of lactic acid bacteria, including Streptococcus, Enterococcus, Klebsiella, Bifidobacterium, Bavariicoccus, and Lacticaseibacillus, accounted for 91.08% (LN-90), while inhibitory effects were observed in LN-450 (4.45%). Functional gene analysis further supported the enhanced glycolysis, L-lactate dehydrogenase, and nitrogen assimilation. Finally, a network analysis indicates a beneficial effect on the genus Enterococcus and Klebsiella by landfill leachate addition. This study demonstrates the efficiency of utilizing landfill leachate to enhance LA recycling from FW fermentation, aligning with the concept of circular economy by transforming waste into valuable resources.

Production of Magnesium Dilactate through Lactic Acid Fermentation with Magnesium Carbonate

Magnesium dilactate is increasingly sought after for its applications in the pharmaceutical, food, and dietary supplement industries due to its essential role in various physiological processes. This study explores a sustainable method for synthesizing magnesium dilactate through lactic acid fermentation using tomato juice, coupling the neutralization of lactic acid with hydrated magnesium carbonate hydroxide. Utilizing the lactic acid bacteria Lactobacillus paracasei and Lactobacillus plantarum, fermentation was optimized in a 50% diluted MRS medium supplemented with glucose and tomato juice supplemented with glucose, yielding a maximum lactate concentration of 107 g/L. Notably, fermentation in diluted media proved more effective than in undiluted tomato juice, highlighting the inhibitory effects of certain organic compounds and the physical nature of the original tomato juice. Post-fermentation, magnesium lactate was crystallized, achieving high recovery rates of up to 95.9%. Characterization of the product through X-ray diffraction and scanning electron microscopy confirmed its crystalline purity. This research underscores the viability of tomato juice as a fermentation substrate, promoting the valorization of agricultural by-products while providing an eco-friendly alternative to traditional chemical synthesis methods for magnesium dilactate production.

Bioprocesses for lactic acid production from organic wastes toward industrialization-a critical review

Lactic acid (LA) is a crucial chemical which has been widely used for industrial application. Microbial fermentation is the dominant pathway for LA production and has been regarded as the promising technology. In recent years, many studies on LA production from various organic wastes have been published, which provided alternative ways to reduce the LA production cost, and further recycle organic wastes. However, few researchers focused on industrial application of this technology due to the knowledge gap and some uncertainties. In this review, the recent advances, basic knowledge and limitations of LA fermentation from organic wastes are discussed, the challenges and suitable envisaged solutions for enhancing LA yield and productivity are provided to realize industrial application of this technology, and also some perspectives are given to further valorize the LA fermentation processes from organic wastes. This review can be a useful guidance for industrial LA production from organic wastes on a sustainable view.

Enhanced lactic acid production through enzymatic hydrolysis: Assessing impact of varied enzyme loadings on co-fermentation of swine manure and apple waste

Anaerobic co-fermentation of swine manure (SM) and apple waste (AW) restricts by the slow hydrolysis of substrates with complex structures, which subsequently leads to low lactic acid (LA) production. Therefore, a novel strategy based on enzymatic pretreatment for improving LA production from anaerobic co-fermentation of SM and AW was proposed in this study. The results indicated that the maximal LA concentration increased from 35.89 ± 1.84 to 42.70 ± 2.18 g/L with the increase of enzyme loading from 0 to 300 U/g VSsubstrate. Mechanism exploration indicated that enzymatic pretreatment significantly promoted the release and hydrolysis of insoluble organic matter from fermentation substrate, thus providing an abundance of reaction intermediates that were directly available for LA production. Additionally, bacteria analysis revealed that the high concentration of LA was associated with the prevalence of Lactobacillus. This study offered an environmental-friendly strategy for promoting SM and AW hydrolysis and provided a viable approach for recovering valuable products.

Lactic acid production with two types of feedstocks from food waste: Effect of inoculum, temperature, micro-oxygen, and initial pH

Lactic acid (LA) is an important chemical with broad market applications. To optimize LA production, food waste has been explored as feedstock. Due to the wide variety of food waste types, most current research studies have obtained different conclusions. This study focuses on carbohydrate-rich fruit and vegetable waste (FVW) and lipid-rich kitchen waste (KW), and the effect of inoculum, temperature, micro-oxygen, and initial pH were compared. FVW has a greater potential for LA production than KW. As an inoculum, lactic acid bacteria (LAB) significantly increased the maximum LA concentration (27.6 g/L) by 50.8 % compared with anaerobic sludge (AS). FVW exhibited optimal LA production at 37 °C with micro-oxygen. Adjustment of initial pH from 4 to 8 alleviated the inhibitory effect of accumulated LA, resulting in a 46.2 % increase in maximum LA production in FVW. The expression of functional genes associated with metabolism, genetic information processing, and environmental information processing was higher at 37 °C compared to 50 °C.

Key challenges in the advancement and industrialization of biobased and biodegradable plastics: a value chain overarching perspective

At the International Symposium on Biodegradable Polymers (ISBP2022) in Sion, Switzerland, experts from academia and industry underscored the remarkable progress in biobased and biodegradable polymers (BBPs) since their initial commercialization around 50 years ago. Despite significant advancements, the technology readiness level (TRL), market adoption, and industrialization of BBPs is not yet competitive to conventional plastics. In this perspective, we summarize the challenges and requirements for advancing the development and industrialization of BBPs, drawing insights from international experts coming from academia and industry, who had participated in the survey and podium discussion during the ISBP2022. In fact, BBPs grapple with persistent and emerging challenges throughout the value chain. These challenges can be grouped into four areas and involve i) the pursuit of sustainable feedstocks together with efficient production and downstream processes as well as recycling technologies and infrastructure; ii) meeting or revisiting product requirements by industry, markets, and consumers; iii) navigating a non-level playing field in their sustainability assessment (LCA) compared to conventional plastics; and iv) struggling with underdeveloped and partially biased policy and financial frameworks as well as lacking clear definitions, terminologies and communication.

The outlooks and key challenges in renewable biomass feedstock utilization for value-added platform chemical via bioprocesses

The conversion of renewable biomass feedstock into value-added products via bioprocessing platforms has become attractive because of environmental and health concerns. Process performance and cost competitiveness are major factors in the bioprocess design to produce desirable products from biomass feedstock. Proper pretreatment allows delignification and hemicellulose removal from the liquid fraction, allowing cellulose to be readily hydrolyzed to monomeric sugars. Several industrial products are produced via sugar fermentation using either naturally isolated or genetically modified microbes. Microbial platforms play an important role in the synthesis of several products, including drop-in chemicals, as-in products, and novel compounds. The key elements in developing a fermentation platform are medium formulation, sterilization, and active cells for inoculation. Downstream bioproduct recovery may seem like a straightforward chemical process, but is more complex, wherein cost competitiveness versus recovery performance becomes a challenge. This review summarizes the prospects for utilizing renewable biomass for bioprocessing.

Electrochemical promotion of organic waste fermentation: Research advances and prospects

The current methods of treating organic waste suffer from limited resource usage and low product value. Research and development of value-added products emerges as an unavoidable trend for future growth. Electro-fermentation (EF) is a technique employed to stimulate cell proliferation, expedite microbial metabolism, and enhance the production of value-added products by administering minute voltages or currents in the fermentation system. This method represents a novel research direction lying at the crossroads of electrochemistry and biology. This article documents the current progress of EF for a range of value-added products, including gaseous fuels, organic acids, and other organics. It also presents novel value-added products, such as 1,3-propanediol, 3-hydroxypropionic acid, succinic acid, acrylic acid, and lysine. The latest research trends suggest a focus on EF for cogeneration of value-added products, studying microbial community structure and electroactive bacteria, exploring electron transfer mechanisms in EF systems, developing effective methods for nutrient recovery of nitrogen and phosphorus, optimizing EF conditions, and utilizing biosensors and artificial neural networks in this area. In this paper, an analysis is conducted on the challenges that currently exist regarding the selection of conductive materials, optimization of electrode materials, and development of bioelectrochemical system (BES) coupling processes in EF systems. The aim is to provide a reference for the development of more efficient, advanced, and value-added EF technologies. Overall, this paper aims to provide references and ideas for the development of more efficient and advanced EF technology.

Design of a sorbitol-activated nitrogen metabolism-dependent regulatory system for redirection of carbon metabolism flow in Bacillus licheniformis

Synthetic regulation of metabolic fluxes has emerged as a common strategy to improve the performance of microbial cell factories. The present regulatory toolboxes predominantly rely on the control and manipulation of carbon pathways. Nitrogen is an essential nutrient that plays a vital role in growth and metabolism. However, the availability of broadly applicable tools based on nitrogen pathways for metabolic regulation remains limited. In this work, we present a novel regulatory system that harnesses signals associated with nitrogen metabolism to redirect excess carbon flux in Bacillus licheniformis. By engineering the native transcription factor GlnR and incorporating a sorbitol-responsive element, we achieved a remarkable 99% inhibition of the expression of the green fluorescent protein reporter gene. Leveraging this system, we identified the optimal redirection point for the overflow carbon flux, resulting in a substantial 79.5% reduction in acetoin accumulation and a 2.6-fold increase in acetate production. This work highlight the significance of nitrogen metabolism in synthetic biology and its valuable contribution to metabolic engineering. Furthermore, our work paves the way for multidimensional metabolic regulation in future synthetic biology endeavors.

Effect of decoupling hydraulic and solid retention times on carbohydrate-rich residue valorization into carboxylic acids

This research assessed the effect of decoupling hydraulic retention time (HRT) and solid retention time (SRT) on the production of volatile fatty acids (VFAs) via anaerobic fermentation of beet molasses. The performance of a continuous stirred tank reactor (CSTR, STR = HTR = 30 days) and two anaerobic sequencing batch reactors (AnSBR) with decoupled STR (30 days) and HRT (20 and 10 days) was compared. Previously, a temperature study in batch reactors (25, 35, and 55 °C) revealed 25 °C as the optimal temperature to maximize the VFAs yield and the long-chain VFAs (> C4) production, being selected for the continuous reactors operation. An HRT of 20 days in AnSBR led to an enhancement in bioconversion efficiency into VFAs (55.5% chemical oxygen demand basis) compared to the CSTR (34.9%). In contrast, the CSTR allowed the production of valuable caproic acid (25.4% vs 4.1% w/w of total VFAs in AnSBR). Decreasing further the HRT to 10 days in AnSBR was detrimental in terms of bioconversion efficiency (21.7%) due to primary intermediates (lactate) accumulation. By decoupling HRT and SRT, VFAs were maximized, revealing HRT as an effective tool to drive specific conversion routes (butyrate- or lactate-fermentation).

Carbon/nitrogen flows and associated microbial communities in full-scale foodwaste treatment plants

Microorganisms play key roles in the conversion of organic matter in foodwaste. However, both the microbially-mediated element (carbon/C and nitrogen/N) flows and associated microbial communities in foodwaste treatment plants (FWTPs) remain unclear. This study collected samples of different foodwaste treatment units from five full-scale FWTPs to analyze the C/N flows and microbial communities in foodwaste treatment processes. Results showed that 39.8-45.0% of organic carbon in foodwaste was converted into biogas. Hydrolytic acidogenic bacteria (e.g., Lactobacillus and Limosilactobacillus) and eukaryota (e.g., Cafeteriaceae, Saccharomycetales, and Agaricomycetes) were more abundant in feedstock and pretreatment units. Redundancy analyses showed that acidogens were major players in the transformation of foodwaste organic matter. Populations of W27 and Tepidanaerobacter were major contributors to the difference in conversion of C/N in these FWTPs. This study could support foodwaste treatment efficiencies improvement by providing insights into C/N flows and associated microbiota in FWTPs.

Caproic acid production from food waste using indigenous microbiota: Performance and mechanisms

Caproic acid (CA) production from food waste (FW) is a promising way for waste recycling, while the fermentation processes need further exploration. In this study, FW acidogenic fermentation under different pH (uncontrolled, 4, 5, 6) using indigenous microbiota was investigated. Result showed that substrate hydrolysis, carbohydrate degradation and acidogenesis increased with the increase of pH. Although various microbial communities were observed in FW, lactic acid bacteria (Lactobacillus and Limosilactobacillus) were enriched at pH lower than 6, resulting in lactic acid accumulation. CA (88.24 mM) was produced at pH 6 accounting for 31.23% of the total product carbon. The enriched lactic acid bacteria were directionally replaced by chain elongators (Caproicibacter, Clostridium_sensu_stricto, unclassified_Ruminococcaceae) at pH 6, and carbohydrates in FW were firstly transformed into lactic acid, then to butyrate and CA through lactate-based chain elongation processes. This work provided a novel CA fermentation pathway and further enriched the FW valorization.

Promoting short-chain fatty acids production from sewage sludge via acidogenic fermentation: Optimized operation factors and iron-based persulfate activation system

Promoting short-chain fatty acids (SCFAs) production and ensuring the stability of SCFAs-producing process are becoming the two major issues for popularizing the acidogenic fermentation (AF). The key controlling operating and influencing factors during anaerobic fermentation process were thoroughly reviewed to facilitate better process performance prediction and to optimize the process control of SCFAs promotion. The wide utilization of iron salt flocculants during wastewater treatment could result in iron accumulating in sewage sludge which influenced AF performance. Additionally, appropriate ferric chloride (FC) could promote the SCFAs accumulation, while poly ferric sulfate (PFS) inhibited the bioprocess. Iron/persulfate (PS) system was proved to effectively enhance the SCFAs production while mechanism analysis revealed that the strong oxidizing radicals remarkably enhanced the solubilization and hydrolysis. Moreover, the changes of oxidation-reduction potential (ORP) and pH caused by iron/PS system exhibited more negative effects on the methanogens, comparing to the acidogenic bacteria. Furthermore, performance and mechanisms of different iron species-activating PS, organic chelating agents and iron-rich biochar derived from sewage sludge were also elucidated to extend and strengthen understanding of the iron/PS system for enhancing SCFAs production. Considering the large amount of generated Fe-sludge and the multiple benefits of iron activating PS system, carbon neutral wastewater treatment plants (WWTPs) were proposed with Fe-sludge as a promising recycling composite to improve AF performance. It is expected that this review can deepen the knowledge of optimizing AF process and improving the iron/PS system for enhancing SCFAs production and provide useful insights to researchers in this field.

Converting textile waste into value-added chemicals: An integrated bio-refinery process

The rate of textile waste generation worldwide has increased dramatically due to a rise in clothing consumption and production. Here, conversion of cotton-based, colored cotton-based, and blended cotton-polyethylene terephthalate (PET) textile waste materials into value-added chemicals (bioethanol, sorbitol, lactic acid, terephthalic acid (TPA), and ethylene glycol (EG)) via enzymatic hydrolysis and fermentation was investigated. In order to enhance the efficiency of enzymatic saccharification, effective pretreatment methods for each type of textile waste were developed, respectively. A high glucose yield of 99.1% was obtained from white cotton-based textile waste after NaOH pretreatment. Furthermore, the digestibility of the cellulose in colored cotton-based textile wastes was increased 1.38-1.75 times because of the removal of dye materials by HPAC-NaOH pretreatment. The blended cotton-PET samples showed good hydrolysis efficiency following PET removal via NaOH-ethanol pretreatment, with a glucose yield of 92.49%. The sugar content produced via enzymatic hydrolysis was then converted into key platform chemicals (bioethanol, sorbitol, and lactic acid) via fermentation or hydrogenation. The maximum ethanol yield was achieved with the white T-shirt sample (537 mL/kg substrate), which was 3.2, 2.1, and 2.6 times higher than those obtained with rice straw, pine wood, and oak wood, respectively. Glucose was selectively converted into sorbitol and LA at a yield of 70% and 83.67%, respectively. TPA and EG were produced from blended cotton-PET via NaOH-ethanol pretreatment. The integrated biorefinery process proposed here demonstrates significant potential for valorization of textile waste.

Sustainable management of food waste; pre-treatment strategies, techno-economic assessment, bibliometric analysis, and potential utilizations: A systematic review

Food waste (FW) contains many nutritional components such as proteins, lipids, fats, polysaccharides, carbohydrates, and metal ions, which can be reused in some processes to produce value-added products. Furthermore, FW can be converted into biogas, biohydrogen, and biodiesel, and this type of green energy can be used as an alternative to nonrenewable fuel and reduce reliance on fossil fuel sources. It has been demonstrated in many reports that at the laboratory scale production of biochemicals using FW is as good as pure carbon sources. The goal of this paper is to review approaches used globally to promote turning FW into useable products and green energy. In this context, the present review article highlights deeply in a transdisciplinary manner the sources, types, impacts, characteristics, pre-treatment strategies, and potential management of FW into value-added products. We find that FW could be upcycled into different valuable products such as eco-friendly green fuels, organic acids, bioplastics, enzymes, fertilizers, char, and single-cell protein, after the suitable pre-treatment method. The results confirmed the technical feasibility of all the reviewed transformation processes of FW. Furthermore, life cycle and techno-economic assessment studies regarding the socio-economic, environmental, and engineering aspects of FW management are discussed. The reviewed articles showed that energy recovery from FW in various forms is economically feasible.

Effects of biochar supported nano zero-valent iron with different carbon/iron ratios on two-phase anaerobic digestion of food waste

The promotion effects of biochar supported nano zero-valent iron (BC/nZVI) with different carbon/iron ratios on two-phase anaerobic digestion (AD) of food waste (FW) were studied. Results suggested that when the carbon/iron ratio was 3:1 AD system showed the best performance, with the concentration of volatile fatty acids (VFAs) in acidogenic phase (AP) and the cumulative methane production in methanogenic phase (MP) increased by 31.4% and 24.8%, respectively. Metagenomic analysis demonstrated that BC/nZVI increased the relative abundance of Defluviitoga in AP, and promoted the growth of Methanothrix in MP. Metabolic pathway analysis in AP indicated that BC/nZVI mainly promoted the abundances of acetate kinase and butyrate kinase to enhance acid production. Methane metabolism pathway analysis in MP revealed that BC/nZVI increased methane production by promoting the module of M00357 and activating related enzymes. The results of this sutdy showed that BC/nZVI promoted AD of FW mainly through acetoclastic methanogenic pathway.

Decentralised system for demand-oriented collection of food waste - Assessment of biomethane potential, pathogen development and microbial community structure

Enormous amounts of food waste (FW) are produced worldwide, requiring efficient disposal strategies, both economically and ecologically. Anaerobic digestion to produce biomethane is among the most promising strategies, but requires proper solutions for storage and delivery of the waste material. Here, a decentralized system for demand-oriented FW storage and its practical usability was assessed. FW was stored under batch and fed-batch strategies at 5 °C, 20 °C and 30 °C for 28 days. The results showed that FW can be stored without cooling since bacterially produced lactic acid rapidly stabilized the material and inactivated pathogens. While FW storage worked well under all storage conditions and strategies, 16S analysis revealed a distinct microbiota, which was highly characteristic for each storage temperature. Moreover, FW storage had no negative impact on methane yield and stored FW contained readily degradable substances for demand-oriented biogas production.

Lactic acid bacteria as a tool for biovanillin production: A review

Vanilla is the most commonly used natural flavoring agent in industries like food, flavoring, medicine, and fragrance. Vanillin can be obtained naturally, chemically, or through a biotechnological process. However, the yield from vanilla pods is low and does not meet market demand, and the use of vanillin produced by chemical synthesis is restricted in the food and pharmaceutical industries. As a result, the biotechnological process is the most efficient and cost-effective method for producing vanillin with consumer-demanding properties while also supporting industrial applications. Toxin-free biovanillin production, based on renewable sources such as industrial wastes or by-products, is a promising approach. In addition, only natural-labeled vanillin is approved for use in the food industry. Accordingly, this review focuses on biovanillin production from lactic acid bacteria (LAB), which is generally recognized as safe (GRAS), and the cost-cutting efforts that are utilized to improve the efficiency of biotransformation of inexpensive and readily available sources. LABs can utilize agro-wastes rich in ferulic acid to produce ferulic acid, which is then employed in vanillin production via fermentation, and various efforts have been applied to enhance the vanillin titer. However, different designs, such as response surface methods, using immobilized cells or pure enzymes for the spontaneous release of vanillin, are strongly advised.

Improving the Utilization of Food Waste: Conversion of Food Waste into Residual Food Dried Substance and Use of This Material as a Culture Nutrient for Microbial Production of Lactic Acid

To reduce food waste (FW) disposal costs, many Koreans now convert FW into residual food dried substances (RFDS) using a house-service food drying machine and then dispose of the RFDS. To recycle RFDS, we tested whether RFDS could be used as a culture nutrient to produce value-added microbial chemicals. As a case study, we attempted to produce lactic acid (LA) by cultivating lactic acid bacteria using RFDS. To prepare the culture medium for LA production, we finely ground the RFDS and dissolved it with CaCO₃, a pH-controlling agent. Six lactic acid bacteria were tested to improve LA production, with Lactococcus lactis showing the highest LA production. To enhance LA production, three hydrolytic enzymes, amylase, protease, and lipase, were introduced separately or simultaneously into the RFDS medium during the cultivation of the L. lactis strain. The addition of amylase alone was the most effective in increasing LA production. We then investigated the effect of the RFDS concentration on LA production. The highest LA production was achieved when 100 g/L of RFDS was used. LA production was scaled up using a 5 L bioreactor. During the fermentation, LA production improved to 46.32 g/L, which was 1.73-fold higher than that (26.83 g/L) obtained from the flask culture. These results show that RFDS from FW can be used as a culture nutrient to produce LA. Our study provides a new and simple FW recycling method and lays the foundation for expanding the usability of FW.

Macroalgal biomass as a potential resource for lactic acid fermentation

Lactic acid is an essential platform chemical with various applications in the chemicals, food, pharmaceutical, and cosmetic industries. Currently, the demand for lactic acid is driven by the role of lactic acid as the starting material for the production of bioplastic polylactide. Microbial fermentation for lactic acid production is favored due to the production of enantiomerically pure lactic acid required for polylactide synthesis, as opposed to the racemic mixture obtained via chemical synthesis. The utilization of first-generation feedstock for commercial lactic acid production is challenged by feedstock costs and sustainability issues. Macroalgae are photosynthetic benthic aquatic plants that contribute tremendously towards carbon capture with subsequent carbon-rich biomass production. Macroalgae are commercially cultivated to extract hydrocolloids, and recent studies have focused on applying biomass as a fermentation feedstock. This review provides comprehensive information on the design and development of sustainable and cost-effective, algae-based lactic acid production. The central carbon regulation in lactic acid bacteria and the metabolism of seaweed-derived sugars are described. An exhaustive compilation of lactic acid fermentation of macroalgae hydrolysates revealed that lactic acid bacteria can effectively ferment the mixture of sugars present in the hydrolysate with comparable yields. The environmental impacts and economic prospects of macroalgal lactic acid are analyzed. Valorization of the vast amounts of spent macroalgal biomass residue post hydrocolloid extraction in a biorefinery is a viable strategy for cost-effective lactic acid production.

One-pot d-lactic acid production using undetoxified acid-pretreated corncob slurry by an adapted Pediococcus acidilactici

Inhibitor tolerance is still a bottleneck for lactic acid bacteria in lignocellulose biorefinery, while it is hard to obtain one engineered strain with strong tolerance to all inhibitors. Herein, a robust adapted d-lactic acid producing strain Pediococcus acidilactici XH11 was obtained by 111 days' long-term adaptive evolution in undetoxified corncob prehydrolysates. The adapted strain had higher inhibitors tolerance compared to the parental strain, primarily due to its increased conversion capacities of four typical aldehyde inhibitors (furfural, HMF, vanillin, and 4-hydroxybenzaldehyde). One-pot simultaneous saccharification and co-fermentation was successfully achieved using the whole slurry of acid-pretreated corncob without solid-liquid separation and detoxification, by applying the adapted P. acidilactici XH11. Finally, 61.9 g/L of d-lactic acid was generated after 96 h' fermentation (xylose conversion of 89.9 %) with the overall yield of 0.48 g/g dry corncob. This study gave an important option for screening of industrial strains in cellulosic lactic acid production processes.

Ultrasonic‑assisted molten salt hydrates pretreated Eucheuma cottonii residues as a greener precursor for third-generation l-lactic acid production

This study aims to establish an efficient pretreatment method that facilitates the conversion of sugars from macroalgae wastes, Eucheuma cottonii residues (ECRs) during hydrolysis and subsequently enhances l-lactic acid (L-LA) production. Hence, ultrasonic-assisted molten salt hydrates (UMSHs) pretreatment was proposed to enhance the accessibility of ECRs to hydrolyze into glucose through dilute acid hydrolysis (DAH). The obtained hydrolysates were employed as the substrate in producing L-LA by separate hydrolysis and fermentation (SHF). The maximum glucose yield (97.75 %) was achieved using UMSHs pretreated ECRs with 40 wt% ZnCl2 at 80 °C for 2 h and followed with DAH. The optimum glucose to L-LA yield obtained for SHF was 90.08 % using 5 % (w/w) inoculum cell densities of B. coagulans ATCC 7050 with yeast extract (YE). A comparable performance (89.65 %) was obtained using a nutrient combination (lipid-extracted Chlorella vulgaris residues (CVRs), vitamin B3, and vitamin B5) as a partial alternative for YE.

Lactic acid fermentation of food waste at acidic conditions in a semicontinuous system: effect of HRT and OLR changes

Lactic acid production through fermentation is an established technology, however, improvements are necessary to reduce the process costs and to decrease its market price. Lactic acid is used in many industrial sectors and its market has increased in the last decade for its use as the raw material for polylactic acid product. Using food waste as a cheap and renewable substrate, as well as fermentation at uncontrolled pH, helps to make the production cheaper and to simplify the downstream purification process. Lactic acid production at acidic conditions and the role of varying organic loading rate (OLR) and hydraulic retention time (HRT) were tested in two different semicontinuous batch fermentation systems. Reactor performances indicated that lactic acid fermentation was still possible at pH < 3.5 and even up to a pH of 2.95. The highest lactic acid production was recorded at 14-day HRT, 2.14 g VS/L·day OLR, and pH 3.11 with a maximum lactic acid concentration of 8.72 g/L and a relative yield of 0.82 g lactate/g carbohydrates. The fermentation microbial community was dominated by Lactobacillus strains, the organism mainly responsible for lactic acid conversion from carbohydrates. This study shows that low pH fermentation is a key parameter to improve lactic acid production from food waste in a semicontinuous system. Acidic pH favored both the selection of Lactobacillus strains and inhibited VFA producers from utilizing lactic acid as primary substrate, thus promoting the accumulation of lactic acid. Finally, production yields tend to decrease with high OLR and low HRT, while lactic acid production rates showed the opposite trend.

Lactic acid production from food waste using a microbial consortium: Focus on key parameters for process upscaling and fermentation residues valorization

In this study, the production of lactic acid from food waste in industrially relevant conditions was investigated. Laboratory assays were first performed in batch conditions to determine the suitable operational parameters for an efficient lactic acid production. The use of compost as inoculum, the regulation of temperature at 35 °C and pH at 5 enhanced the development of Lactobacillus sp. resulting in the production of 70 g/L of lactic acid with a selectivity of 89% over the other carboxylic acids. Those parameters were then applied at pilot scale in successive fed-batch fermentations. The subsequent high concentration (68 g/L), yield (0.38 g/gTS) and selectivity (77%) in lactic acid demonstrated the applicability of the process. To integrate the process into a complete value chain, fermentation residues were then converted into biogas through anaerobic digestion. Lastly, the experiment was successfully replicated using commercial and municipal waste collected in France.

Microbial cell factories for the production of three-carbon backbone organic acids from agro-industrial wastes

At present, mass production of basic and valuable commodities is dependent on linear petroleum-based industries, which ultimately makes the depletion of finite natural reserves and accumulation of non-biodegradable and hazardous wastes. Therefore, an ecofriendly and sustainable solution should be established for a circular economy where infinite resources, such as agro-industrial wastes, are fully utilized as substrates in the production of target value-added chemicals. Hereby, recent advances in metabolic engineering strategies and techniques used in the development of microbial cell factories for enhanced production of three-carbon platform chemicals such as lactic acid, propionic acid, and 3-hydroxypropionic acid are discussed. Further developments and future perspectives in the production of these organic acids from agro-industrial wastes from the dairy, sugar, and biodiesel industries are also highlighted to demonstrate the importance of waste-based biorefineries for organic acid production.

R, Maitra S, Tarafdar A, Alphy MP, Kumar AN, Madhavan A, Sirohi R, Awasthi MK, Sindhu R, Varjani S, Binod P. Waste-Derived Fuels and Renewable Chemicals for Bioeconomy Promotion: A Sustainable Approach

Bio-based fuels and chemicals through the biorefinery approach has gained significant interest as an alternative platform for the petroleum-derived processes as these biobased processes are noticed to have positive environmental and societal impacts. Decades of research was involved in understanding the diversity of microorganisms in different habitats that could synthesize various secondary metabolites that have functional potential as fuels, chemicals, nutraceuticals, food ingredients, and many more. Later, due to the substrate-related process economics, the diverse low-value, high-carbon feedstocks like lignocellulosic biomass, industrial byproducts, and waste streams were investigated to have greater potential. Among them, municipal solid wastes can be used as the source of substrates for the production of commercially viable gaseous and liquid fuels, as well as short-chain fattyacids and carboxylic acids. In this work, technologies and processes demanding the production of value-added products were explained in detail to understand and inculcate the value of municipal solid wastes and the economy, and it can provide to the biorefinery aspect.

Co-valorization of corn cobs and dairy wastewater for simultaneous saccharification and lactic acid production: Process optimization and kinetic assessment

This study optimized the co-valorization of corn cob wastes (CCW) and dairy wastewater for simultaneous saccharification and lactic acid (LA) production (sDWW-SSF). Subsequently, the kinetics of Lactobacillus plantarum growth and LA production was assessed using the optimized conditions under microaerophilic (sDWW-SSF_{microaerophilic}) and anaerobic (sDWW-SSF_anaerobic) conditions, and thereafter compared to De Man, Rogosa and Sharpe (MRS) medium modified with pretreated CCW (mMRS-SSF_{microaerophilic}). Optimized sDWW-SSF conditions produced maximum LA concentration and conversion of 11.15 ± 0.42 g/L and 18.90 ± 0.75%, respectively. Kinetic studies revealed that although the mMRS-SSF_{microaerophilic} system obtained a higher maximum specific growth rate (μ_max) and maximum potential LA concentration (P_m) compared to the wastewater-based bioprocesses, the data obtained for the latter were comparable when taking the resources and costs into consideration. These findings represent the potential to eliminate the use of valuable resources in lignocellulosic bioprocesses and provide insights on innovation towards driving a sustainable economy in line with the food-energy-water nexus.