Peroxymonosulfate activation by a metal-free biochar for sulfonamide antibiotic removal in water and associated bacterial community composition

N-doped biochar-Fe/Mn as a superior peroxymonosulfate activator for enhanced bisphenol a degradation

Emerging contaminants (ECs) are characterized by their widespread environmental distribution and low concentrations, posing significant challenges for their effective removal from source wastewater. To better deal with the problems associated with ECs, we developed a robust Fe-Mn bimetallic catalyst supported on N-doped biochar (FM@NBC-8) for peroxymonosulfate (PMS)-mediated advanced oxidation system, in which bisphenol A (BPA) was investigated as a typical EC. Particularly, complete degradation of BPA in the FM@NBC-8/PMS system was achieved within 5 min, accompanying with a high TOC removal. The degradation rate of BPA with FM@NBC-8 was 143 times that of the initial biochar (BC-8), 20 and 91 times that of single metal-doped catalysts Fe (F@NBC-8) and Mn (M@NBC-8), respectively. The degradation rate of BPA was enhanced to 1.7337 min⁻1 with 0.6 g L⁻1 FM@NBC-8 utilized to activate PMS, achieving a superior performance in BPA degradation compared to most reported results in the literature (0.081∼1.43 min⁻1). The introduction of Fe, Mn, and N elements dramatically enhanced the specific surface area (from 46.285 to 218.541 m2 g⁻1) of the catalyst, thereby enhancing the adsorption capacity of PMS and pollutants on the catalyst. Moreover, the accelerated electron transfer between the catalyst and PMS favored the formation of low-valent metal intermediates (Fe(II)-O-O-SO3- and Mn(II)-O-O-SO3-), responsible for the generation of SO4•-and •OH. And 1O2 was generated mainly via the decomposition of SO5•- in FM@NBC-8/PMS system, thereby collectively enhancing the pollutant degradation. The stability of the catalyst was attributed to the synergistic effects of nitrogen doping and biochar encapsulation, which ensured effective operation of the FM@NBC-8/PMS system across a broad pH range of 3 to 10, while also providing resistance to interference from ubiquitous anions. This study indicates that the bimetal biochar-based materials for catalytic PMS activation have significant potential for practical application in green environmental remediation.

A comprehensive review of modified biochar-based advanced oxidation processes for environmental pollution remediation: efficiency, mechanism, toxicity assessment

Biochar (BC) has been demonstrated efficacy in activating oxidants to enhance environmental contaminant degradation. However, performance limitations of pristine biochar, including insufficient active sites and low electron transfer efficiency, primarily stemming from feedstock heterogeneity and pyrolytic parameter variations, resulting in suboptimal activation efficiency in practical applications. Recent studies demonstrated that targeted functionalization strategies, such as heteroatom doping, metal loading, and acid/alkali modification, could significantly improving activation performance of biochar, which was critical for advancing biochar-based advanced oxidation processes. In this review, the modification methods of biochar and their applications in activating diverse oxidants for water purification, soil remediation, air pollutant mitigation, and antimicrobial disinfection were summarized. Additionally, the differences in mechanisms among modified biochars for activating different oxidants in pollutant degradation were systematically illustrated. This review indicated that both free radicals and non-free radicals pathway played key roles in pollutant removal, either individually or through synergistic effects. Furthermore, potential challenges in applying modified biochar-based AOPs at a practical scale were also discussed. This review have shown that the presence of natural substances and impurities in these environments can deplete active components, resulting in reduced pollutant degradation efficiencies compared to controlled laboratory conditions. The current review illustrated that the toxicity of modified biochar was related to feedstocks and pyrolysis processes. Meanwhile, the toxicity of degradation intermediates could significantly reduce using modified biochar-based AOPs. Overall, this review provide insights for future research in this field.

Achieving advanced nitrogen removal from oxytetracycline wastewater by partial nitrification-endogenous denitrification: performance, metabolic pathways, microorganism community, and potential applications

Partial nitrification-endogenous denitrification (PNED) can achieve advanced nutrient removal from wastewater. Herein, an anaerobic/oxic/anoxic/oxic-sequencing batch reactor (AOAO-SBR) was used to treat real oxytetracycline (OTC) pharmaceutical wastewater via PNED. Partial nitrification with an average nitrite accumulation ratio of 91.5 % was achieved. When the influent total nitrogen was 105 ± 10 mg/L, the effluent of it was only 5.9 mg/L, and the removal efficiency was 94.8 %. In the typical cycle, multiple nitrogen removal pathways including endogenous denitrification, simultaneous nitrification-denitrification, and denitrification contributed to 68.0 %, 20.3 %, and 7.3 %. The effluent concentration of NH4+-N was 5 mg/L, and NO2--N and NO3--N were not detected. The biodegradation pathways of OTC were proposed, 47.1 % of OTC was degraded and eight possible degradation byproducts were detected with low toxicity in the extracellular and intracellular. Moreover, Extracellular polymeric substances increased from 35.3 (mg/gVSS) to 74.4 (mg/gVSS) during 120 days, which acts as a critical role in OTC degradation. High-throughput sequencing results showed that the relative abundance of ammonia-oxidizing bacteria was 2.4 %, and nitrite-oxidizing bacteria were washed out, which was conducive to partial nitrification. Candidatus_Competibacter (13.9 %) enhanced nitrogen removal by endogenous denitrification. Thauera (13.5 %), Ottowia (9.2 %), and OLB13 (1.2 %) are the main OTC-degrading bacteria. This study provides a valuable reference to treat OTC pharmaceutical wastewater effectively.

Removal of sulfonamides by persulfate-based advanced oxidation: A mini review

Sulfonamides (SAs) are known for their persistence and have become one of the most frequently detected pharmaceuticals and personal care products (PPCPs) in the environments. The widespread presence of SAs in natural waters, wastewater, soil, and sediment has prompted growing concern due to their potential threats to both human health and ecological systems. Persulfate-based advanced oxidation processes (PS-AOPs) have emerged as a promising technology for effectively mitigating the presence of these pollutants in the environment. This review offers a comprehensive overview of the degradation of SAs by PS-AOPs. The various activation methods of persulfate for the purpose of removing SAs are elaborated upon in detail. The factors influencing the removal efficiency of SAs through PS-AOPs is thoroughly discussed. Additionally, the conceivable mechanisms and degradation pathways associated with various types of SAs are discussed. Lastly, existing challenges are identified, and future prospects pertaining to the utilization of PS-AOPs for efficient SA removal are presented.

Peroxymonosulfate Activation by Rice-Husk-Derived Biochar (RBC) for the Degradation of Sulfamethoxazole: The Key Role of Hydroxyl Groups

In this work, rice-husk-derived biochar (RBC) was synthesized by using simple one-step pyrolysis strategies and served as catalysts to activate peroxymonosulfate (PMS) for degrading sulfamethoxazole (SMX). When the annealing temperature (T) = 800 °C, RBC800 exhibits the typical hardwood structure with several micropores and mesoporous. Furthermore, RBC800 obtains more defect sites than RBC600, RBC700, and RBC900. In the RBC800/PMS system, the removal rate of the SMX reached 92.0% under optimal conditions. The kinetic reaction rate constant (kobs) of the RBC800/PMS system was 0.009 min-1, which was about 1.50, 1.28, and 4.50 times that of the RBC600/PMS (kobs = 0.006 min-1), RBC700/PMS (kobs = 0.007 min-1), and RBC900/PMS (kobs = 0.002 min-1) systems, respectively. In the RBC800/PMS system, sulfate radical (SO4•-) is the main active species. Compared with other active sites, the hydroxyl group (C-OH) on the surface of RBC800 interacts more strongly with PMS, which is more likely to promote the stretching of the O-O bond of the PMS, thus breaking into the activated state and significantly reducing the activation energy required for reaction. The degradation intermediates of SMX were speculated, and the toxicity analysis was conducted. Generally, this work reveals in depth the interaction between reactive sites of biochar-based catalysts and PMS at the molecular level.

Synergistic activation of peroxymonosulfate by 3D CoNiO2/Co core-shell structure biochar catalyst for sulfamethoxazole degradation

In this study, a 3D CoNiO2/Co core-shell structure biochar catalyst derived from walnut shell was synthesized by hydrothermal and ion etching methods. The prepared BC@CoNi-600 catalyst exhibited exceptional peroxymonosulfate (PMS) activation. The system achieved 100 % degradation of sulfamethoxazole (SMX). The reactive oxygen species in the BC@CoNi-600/PMS system included SO4-, OH, and O2-. Density functional theory calculations explored the synergistic effects between nickel-cobalt bimetallic and carbon matrix during PMS activation. The unique 3D core-shell structure of BC@CoNi-600 features an outer nickel-cobalt bimetallic layer with exceptional PMS adsorption capacity, while protecting the zero-valence Co of the inner layer from oxidation. Based on the experimental-data, machine learning modeling mechanism, and information theory, a nonlinear modeling method was proposed. This study utilizes a machine learning approach to investigate the degradation of SMX in complex aquatic environments. This study synthesized a novel biochar-based catalyst for activated PMS and provided unique insights into its environmental applications.

Unveiling activation mechanism of persulfate by homologous hemp-derived biochar catalysts for enhanced tetracycline wastewater remediation

Advancements in biochar activating persulfate advanced oxidation processes (PS-AOP), have gained significant attention. However, the understanding of biochar-based catalysts in activating PS remains limited. Herein, biochar (BC) and N-doped biochar (NBC) were synthesized from hemp for activating PS to treat tetracycline (TC) wastewater and analyzed their mechanisms separately. Surprisingly, N-doped in biochar leads to a change in the activation mechanism of PS. The BC-PS system operates mainly through a radical pathway, advantageous for treating soil organic pollution (68%) with pH adaptability (less than 10% variation). Nevertheless, the NBC-PS system primarily employs an electron transfer non-radical pathway, demonstrating stability (only 7% performance degradation over four cycles) and enhanced resistance to anionic interference (less than 10% variation) in organic wastewater treatment. This study provides a technical reference and theoretical foundation for enhancing biochar activation of PS in the removal of organic pollutants from aquatic and terrestrial environments.

Novel strategy for treating high salinity oilfield produced water: Pyrite-activated peroxymonosulfate coupled with heterotrophic ammonia assimilation

Existing conventional biological treatment techniques face numerous limitations in effectively removing total petroleum hydrocarbons (TPHs) and ammonia (NH4+-N) from oilfield-produced water (OPW), highlighting the pressing need for innovative pre-oxidation and biological treatment processes. In this study, a pyrite-activated peroxymonosulfate (PMS)-coupled heterotrophic ammonia assimilation (HAA) system was established to achieve satisfactory system performance for OPW treatment. Pyrite sustained-release Fe2+-activated PMS was used to produce SO4•- and •OH, and 71.0 % of TPHs were effectively removed from the oil wastewater. The average TPHs and NH4+-N removal efficiencies in the test group with pre-oxidation were 96.9 and 98.3 %, compared to 46.5 and 77.1 % in the control group, respectively. The maximum fluorescence intensities of tryptophan protein and aromatic protein in the test group declined by 83.7 %. Fourier transform ion cyclotron resonance mass spectrometry revealed that pre-oxidation degraded more long-chain hydrocarbons and aromatic family compound, whereas the HAA process produced more proteins and carbohydrates. Pyrite-PMS promoted the enrichment of ammonia-assimilating bacteria, alleviating the explosive increase in extracellular polymeric substances and reducing sludge settleability. The low cost, efficiency, green chemistry principles, and synergies of this approach make it a powerful solution for practical OPW treatment to reduce environmental impacts and promote sustainable wastewater treatment.

Recent progress in the production and application of biochar and its composite in environmental biodegradation

Over the past few decades, extensive research has been conducted to develop cost-effective and high-quality biochar for environmental biodegradation purposes. Pyrolysis has emerged as a promising method for recovering biochar from biomass and waste materials. This study provides an overview of the current state-of-the-art biochar production technology, including the advancements and biochar applications in organic pollutants remediation, particularly wastewater treatment. Substantial progress has been made in biochar production through advanced thermochemical technologies. Moreover, the review underscores the importance of understanding the kinetics of pollutant degradation using biochar to maximize its synergies for potential environmental biodegradation. Finally, the study identifies the technological gaps and outlines future research advancements in biochar production and its applications for environmental biodegradation.

Effect of antibiotic cocktail exposure on functional disturbance of nitrifying microbiome

The present study quantitatively determined the degree and type of functional disturbance in the nitrifying microbiome caused by exposure to a single oxytetracycline (OTC) and a two-antibiotic mixture containing OTC and sulfamethoxazole (SMX). While the single antibiotic had a pulsed disturbance on nitritation that was recoverable within three weeks, the antibiotic mixture caused a more significant pulsed disturbance on nitritation and a potential press disturbance on nitratation that was not recoverable for over five months. Bioinformatic analysis revealed significant perturbations for both canonical nitrite-oxidizing (Nitrospira defluvii) and potential complete ammonium-oxidizing (Ca. Nitrospira nitrificans) populations that were strongly associated with the press perturbation on nitratation. In addition to this functional disturbance, the antibiotic mixture reduced the biosorption of OTC and altered its biotransformation pathways, resulting in different transformation products compared with those produced when OTC was treated as a single antibiotic. Collectively, this work elucidated how the antibiotic mixture can affect the degree, type, and duration of the functional disturbance on nitrifying microbiome and offer new insights into the environmental consequences of antibiotic residues (e.g., their fate, transformation, and ecotoxicity) when present as an antibiotic mixture rather than single antibiotics.

Activation of calcium peroxide by nitrogen and sulfur co-doped metal-free lignin biochar for enhancing the removal of emerging organic contaminants from waste activated sludge

The accumulation of emerging organic contaminants (EOCs) in waste activated sludge (WAS) is a global concern. In this study, a multi-heteroatom nitrogen and sulfur was successfully embedded into lignin-based biochar (N-S-LGBC) and used it to activate calcium peroxide (CP) for the degradation of 4-nonylphenol (4-NP) in WAS. N-S-LGBC/CP was effective in degrading 85 % of 4-NP within 12 h through the activation of CP owing to hydroxyl radicals and singlet oxygen species generated from the synergism among pyrrolic-N, thiophenic-S, and lattice oxygen, i.e., active sites responsible for 4-NP degradation. These results highlight substrate biodegradability for subsequent bioprocesses that improves WAS treatment in EOC degradation by the N-S-LGBC/CP-mediated process. There was abundance of distinct Aggregatilinea genus within the phylum Chloroflexi during N-S-LGBC/CP treatment, indicating high 4-NP pretreatment efficiency in WAS. This work provides a new understanding of N-S-co-doped carbocatalysts in green and sustainable hydroxyl radical-driven carbon advanced oxidation (HR-CAOP) platforms for WAS remediation.

Applications of biochar in sulfate radical-based advanced oxidation processes for the removal of pharmaceuticals and personal care products

Recently, biochar (BC) has been increasingly used as a catalyst for the degradation of 'emerging pollutants' (EPs). Pharmaceuticals and personal care products (PPCPs), which come under 'EPs', can be harmful to the aquatic ecosystem despite being present in very low concentrations (ng/L-μg/L). Advanced oxidation processes (AOPs), which produce sulfate radical (SR-AOPs), show a great potential to degrade PPCPs effectively from wastewater. It is mainly due to the higher stability, long half-lives and better non-selectivity of SO₄^{• -} compared with AOPs with •OH generation. Furthermore, research focus is now given on AOPs coupled with BC-supported catalyst to enhance the degradation of PPCPs because of quicker generation of radicals (•OH, SO₄^•-) by the activation of persulfate (PS) and peroxymonosulfate (PMS). This article sheds light on the catalytic ability of BC after its physical and chemical modifications such as acid/alkali treatment and metal doping. The role of persistent free radicals (PFRs) in the BC for effective removal of PPCPs has been elaborated. Its potential applications in synthetic as well as real wastewater have also been discussed.

Nitrogen and boron co-doped lignin biochar for enhancing calcium peroxide activation toward organic micropollutants decontamination in waste activated sludge and related microbial structure dynamics

This study synthesized dual heteroatom nitrogen and boron-co-doped lignin-based biochar (NB-LGBC) for calcium peroxide (CP) activation to enhance the removal of organic micropollutants (OMPs), namely, 4-nonylphenol (4-NP) from waste activated sludge (WAS). NB-LGBC/CP enhanced 4-NP degradation by arriving at 83 % removal in 12 h. The NB-LGBC/CP system degraded 4-NP via a synergistic interaction (HO•, O₂^•- radicals, and singlet oxygen) and electron transfer due to the N-B-C bonding configurations. Results of fluorescence excitation-emission matrix (FEEM) analysis revealed significantly increase in biodegradable organics from treated WAS mixture. NB-LGBC/CP treatment enriched alkaliphilic bacterium associated with the predominance of the genus Desulfonatronum within the phylum Proteobacteria in the WAS, which improved the biological treatment capacity of 4-NP. Thus, NB-LGBC in HR-CAOP will be a novel approach for WAS decontamination.

Microbial community structure and potential function associated with poly-3-hydroxybutyrate biopolymer-boosted activation of peroxymonosulfate for waste-activated sludge decontamination

Excess waste-activated sludge (WAS) is a major biosolid management problem due to its biohazardous and recalcitrant content of phthalate esters (PAEs). This study aimed to assess the combined use of biopolymer, poly-3-hydroxybutyrate and peroxymonosulfate to degrade PAEs and decontaminate WAS. Poly-3-hydroxybutyrate was biosynthesized by Cupriavidus sp. L7L. The combined poly-3-hydroxybutyrate and peroxymonosulfate process removed 86 % of PAEs from WAS in 12 h. The carbonyl groups of poly-3-hydroxybutyrate were conducive to peroxymonosulfate activation leading to PAE degradation followed the radical pathway and surface-mediated electron transfer. Poly-3-hydroxybutyrate and peroxymonosulfate also enriched the PAE-biodegrading microbes in WAS. The microbial population and the functional composition in response to peroxymonosultate treatment was identified, with the genus Sulfurisoma being the most abundant. This synergistic treatment, i.e., advanced oxidation process, was augmented by highly promising microbial polyesters, exhibited important implications for WAS pretreatment toward circular bioeconomy that encompasses carbon-neutral biorefinery and mitigate pollution.

The remediation of di-(2-ethylhexyl) phthalate-contaminated sediments by water hyacinth biochar activation of calcium peroxide and its effect on cytotoxicity

The presence of di-(2-ethylhexyl) phthalate (DEHP) in the aquatic systems, specifically marine sediments has attracted considerable attention worldwide, as it enters the food chain and adversely affects the aquatic environment and subsequently human health. This study reports an efficient carbocatalytic activation of calcium peroxide (CP) using water hyacinth biochar (WHBC) toward the efficient remediation of DEHP-contaminated sediments and offer insights into biochar-mediated cellular cytotoxicity, using a combination of chemical and bioanalytical methods. The pyrolysis temperature (300-900 °C) for WHBC preparation significantly controlled catalytic capacity. Under the experimental conditions studied, the carbocatalyst exhibited 94% of DEHP removal. Singlet oxygen (¹O₂), the major active species in the WHBC/CP system and electron-rich carbonyl functional groups of carbocatalyst, played crucial roles in the non-radical activation of CP. Furthermore, cellular toxicity evaluation indicated lower cytotoxicity in hepatocarcinoma cells (HepG2) after exposure to WHBC (25-1000 μg mL^-1) for 24 h and that WHBC induced cell cycle arrest at the G2/M phase. Findings clearly indicated the feasibility of the WHBC/CP process for the restoration of contaminated sediment and contributing to understanding the mechanisms of cytotoxic effects and apoptotic of carbocatalyst on HepG2.

Metal-free single heteroatom (N, O, and B)-doped coconut-shell biochar for enhancing the degradation of sulfathiazole antibiotics by peroxymonosulfate and its effects on bacterial community dynamics

Metal-free single heteroatom (N, O, and B)-doped coconut-shell biochar (denoted as N-CSBC, O-CSBC, and B-CSBC, respectively) were fabricated in a one-step pyrolysis process to promote peroxymonosulfate (PMS) activation for the elimination of sulfathiazole (STZ) from aquaculture water. B-CSBC exhibited remarkably high catalytic activity with 92% of STZ degradation in 30 min attributed to the presence of meso-/micro-pores and B-containing functional groups (including B-N, B-C, and B₂O₃ species). Radical quenching tests revealed SO₄^•-, HO•, and ¹O₂ being the major electron acceptors contributing to STZ removal by PMS over B-CSBC catalyst. The B-CSBC catalyst has demonstrated high sustainability in multiple consecutive treatment cycles. High salinity and the presence of inorganic ions such as chloride, enhanced the performance of the sulfate radical-carbon-driven advanced oxidation processes (SR-CAOPs) as pretreatment strategy that significantly facilitated the removal of STZ from aquaculture water. Furthermore, a potential sulfonamide-degrading microorganism, Cylindrospermum_stagnale, belonging to the phylum Cyanobacteria, was the dominant functional bacteria according to the results of high-throughput 16S rRNA gene sequencing conducted after the B-CSBC/PMS treatment. This study provides new insights into the SR-CAOP combined with bioprocesses for removing STZ from aqueous environments.

Bioremediation pretreatment of waste-activated sludge using microalgae Spirulina platensis derived biochar coupled with sodium sulfite: Performance and microbial community dynamics

4-Nonylphenol is a typical endocrine-disrupting compound found in waste-activated sludge. This study evaluates the feasibility of blue-green algae (Spirulina platensis)-based biochar as a carbon-neutral material to improve sodium sulfite (S(IV))-mediated sludge purification. Blue-green algae-based biochar is an effective activator (at 500 °C and 3 × 10^-6 M) of sodium sulfite and removed 75 % of 4-nonylphenol at pH 6 using at 1.7 g/L of dosage. Possible synergistic relationships among the coexisting oxidizing species (SO₃^•-, SO₄^•-, HO•, and ¹O₂), obvious defect structure, and abundant carbonyl oxygen groups on the surface of the biochar together dived advanced oxidation process. The bacterial consortia promoted the decomposition of biologically available substrates in the biosolid mixture, which led to the enrichment of Denitratisoma, and boosted 4-nonylphenol biodegradation. This study outlines a potential carbon-neutral, cost-effective, and sustainable sludge treatment strategy using renewable blue-green algae-based biochar, aiding 4-nonylphenol biodegradation in waste-activated sludge.

Metal-free catalysis for organic micropollutant degradation in waste activated sludge via poly(3-hydroxybutyrate) biopolymers using Cupriavidus sp. L7L coupled with peroxymonosulfate

This study employed a novel and environment-friendly biopolymer/oxidant catalytic system, viz., poly(3-hydroxybutyrate)/peroxymonosulfate (PHB/PMS), for pretreating wastewater sludge for the first time. Under optimal conditions, i.e., 3.1 × 10^-4 M of PMS and 3.3 g/L of PHB at pH = 6.0, the PAHs in the sludge matrix was decreased by 79 % in 12 h. Increase in salinity (75 % synthetic seawater) achieved 83 % of PAHs degradation. Functional groups (CO) of the biopolymer matrix were active centers for biopolymer-mediated electron transfer that produced reactive oxygen species (SO₄^-, HO, and ¹O₂) for adsorption and catalytic oxidation of PAHs in the sludge. Functional metagenomic analysis revealed the main genus, Conexibacter (phylum, Actinobacteria) exhibited PAH-degrading function with high efficiency in the biodegradation of PAHs from sludge pretreated with PHB/PMS. Coupling chemical oxidation and biostimulation using bacterial polymer-based biomaterials is effective and beneficial for pretreating wastewater sludge toward circular bioeconomy.

Assessing sediment organic pollution via machine learning models and resource performance

Due to the potential ecological risks of organic pollution in sediments, aquatic ecosystems are currently facing substantial environmental threats. Assessing and controlling sediment pollution has become a huge challenge. Therefore, this study proposes a novel strategy for predicting organic pollution indicators for sediment, as well as an effective resource-utilization method. Contaminated sediments were converted into catalysts for sulfate radical advanced oxidation technologies by a one-step calcination method. The results revealed that the catalyst excelled in activating peroxymonosulfate to degrade tetracycline via a non-radical pathway. Most importantly, a predictive model of organic pollution indicators was established by machine learning. This study provides a novel approach for resource utilization and a strategy for assessing organic pollution in sediments.

Potential toxic effects of sulfonamides antibiotics: Molecular modeling, multiple-spectroscopy techniques and density functional theory calculations

Sulfonamide antibiotics (SAs) are widely used in medicine, animal husbandry and aquaculture, and excessive intake of SAs may pose potential toxicity to organisms. The toxicological mechanisms of two classical SAs, sulfamerazine (SMR) and sulfamethoxazole (SMT), were investigated by molecular docking, DFT and multi-spectroscopic techniques using HSA and BSA as model proteins. The quenching of HSA/BSA endogenous fluorescence by SMR was higher than that by SMT due to the stronger binding effect of the pyrimidine ring on HSA/BSA compared to the oxazole ring, and that result was consistent with that predicted by DFT calculations. Thermodynamic parameters show that the binding of SAs to HSA/BSA is an exothermic process that proceeds spontaneously (ΔG < 0). Marker competition experiments illustrate that the binding site of SMR/SMT on serum albumin is located in subdomain IIIA. The combination of SAs and HSA/BSA is mainly realized by hydrogen bond and hydrophobic interaction, and the concept is also supported by molecular modeling. The reduced α-helix content of HSA/BSA induced by SMR/SMT indicates a greater stretching of the protein α-helix structure of the SMR/SMT-HSA/BSA. The results could provide useful toxicological information on the hazards of SAs in response to growing concern that SAs may pose a toxic threat to organisms.

Removal of 4-nonylphenol in activated sludge by peroxymonosulfate activated with sorghum distillery residue-derived biochar

The presence of 4-nonylphenol (4-NP), an endocrine disrupting chemical, waste activated sludge (WAS) or biosolids at elevated content requires effective method for 4-NP reduction in total sludge management. Herein, sorghum distillery residue-based biochar-activated peroxymonosulfate (SDRBC/PMS) system was studied as pretreatment of WAS. Results indicated 91% of 4-NP removal at pH 6.0 in the presence of 3.1 × 10^-6 M and 0.8 g L^-1 PMS and SDRBC500, individually. The synergetic effects of singlet oxygen (¹O₂) and the abundant functional sites (C = O/C-O content) of SDRBC significantly improved 4-NP degradation. The decreased fluorescent dissolved organic matter (DOM) in the sludge also enhanced the pretreatment efficiency. Moreover, the enrichment of the Nitrospira functional bacteria in the microbial community yielded the highest 4-NP degradation in the SDRBC/PMS-pretreated sludge. The SDRBC/PMS system functions mainly via nonradical-mediated oxidation pathway in pretreating WAS in particular and potentially by combined advanced oxidation and biodegradation processes for wastewater treatment in general.

Ecological responses of coral reef to polyethylene microplastics in community structure and extracellular polymeric substances

The relationships and interactions between extracellular polymeric substances (EPS) and microplastics (MPs) in coral reef ecosystems were symmetrically investigated. The current study aims to investigate the responses of scleractinian coral (Goniopora columna) to exposure of model MPs, exemplified by polyethylene (PE), in the size range of 40-48 μm as affected by MPs concentration of MP in the range between 0 and 300 mg L^-1 for 14 days. The structure of EPS-associated microbial community was studied using a series of techniques including high-throughput sequencing of 16 S rRNA, transmission electron microscopy (TEM), hydrodynamic diameter, surface charge (via zeta potential), X-ray diffraction (XRD), attenuated total reflectance‒Fourier transform infrared (ATR‒FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and fluorescence excitation-emission matrix (FEEM) spectroscopy. Microbial interactions between PE-MPs and coral caused aggregation and formation of EPS matrix, which resulted in increase and decrease in the relative abundance of Donghicola (Proteobacteria phylum) and Marivita (Proteobacteria phylum) in PE-MP-associated EPS, respectively. Particle size, electrostatic interactions, and complexation with the functional groups of the EPS-based matrix affected the humification index. FEEM spectroscopy analyses suggested the presence of humic- and fulvic-like fluorophores in EPS and dissolved organic matter (DOM) in PE-MP-derived DOM. The findings provided insights into the potential environmental implications of coral-based EPS and co-existing microbial assemblages due to EPS-PE-MP-microbiome interactions throughout the dynamic PE-MP exposure process.

Degradation of 4-nonylphenol in marine sediments using calcium peroxide activated by water hyacinth (Eichhornia crassipes)-derived biochar

The contamination of marine sediments by 4-nonylphenol (4-NP) has become a global environmental problem, therefore there are necessaries searching appropriate and sustainable remediation methods for in-situ applications. Herein, water hyacinth [(WH) (Eichhornia crassipes)]-derived metal-free biochar (WHBC) prepared at 300-900 °C was used to promote the calcium peroxide (CP)-mediated remediation of 4-NP-contaminaed sediments. At [CP] = 4.37 × 10^-4 M, [WHBC] = 1.5 g L^-1, and pH = 6.0, the degradation of 4-NP was 77% in 12 h following the pseudo-first order rate law with rate constant (k_obs) of 4.2 × 10^-2 h^-1. The efficient 4-NP degradation performance and reaction mechanisms of the WHBC/CP system was ascribed to the synergy between the reactive species (HO• and ¹O₂) at the WHBC surface on which there were abundant electron-rich carbonyl groups and defects/vacancies in the catalyst structure provides active sites, and the ability of the graphitized carbon framework to act as a medium for electron shuttling. According to microbial community analysis based on amplicon sequence variants, bacteria of the genus Solirubrobacter (Actinobacteria phylum) were dominant in WHBC/CP-treated sediments and were responsible for the biodegradation of 4-NP. The results showed great promise and novelty of the hydroxyl radical-driven carbon advanced oxidation processes (HR-CAOPs) that relies on the value-added utilization of water hyacinth for contaminated sediment remediation in achieving circular bioeconomy.

Resource utilization of tannery sludge to prepare biochar as persulfate activators for highly efficient degradation of tetracycline

In this work, a low-cost carbon-based catalyst (TSBC) was prepared by the facile one-pot pyrolysis of tannery sludge (TS) and used to activate persulfate (PS) for tetracycline (TC) removal. The results showed that TSBC-500 exhibited optimal physicochemical properties and the best performance for PS activation to remove TC from drinking water. Approximately 99.1% of TC was removed in the TSBC-500/PS system, which was considerably higher than those in the TSBC-500 adsorption and pure PS systems. Radical quenching experiments indicated that •OH and SO₄•^- played major roles in the TC removal in the TSBC-500/PS system. In addition, transition metals, functional groups, and the high degree of carbon structural defects were beneficial for PS activation to degrade TC. This study not only newly contributes to high-value utilization of TS as a PS activator but also offers an efficient method for the removal of organic pollutants.

Enhanced removal of antibiotics and antibiotic resistance genes in a soil microbial fuel cell via in situ remediation of agricultural soils with multiple antibiotics

Soil microbial fuel cells (MFCs) have been applied for the in situ remediation of soils polluted by single antibiotics. However, the investigation of only single antibiotic pollution has hindered MFC application in real-world soil remediation, where the effects of multiple antibiotics with similar chemical structures on the fate of antibiotics and their corresponding antibiotic resistance genes (ARGs) remain unknown. In this study, antibiotic removal rates, microbial community compositions, metabolite compositions, and ARG abundances were investigated in soil MFCs by adding two commonly used antibiotics (sulfadiazine, SDZ, and sulfamethoxazole, SMX), and comparing them with the addition of only a single antibiotic (SDZ). The antibiotic removal rate was higher in the soil MFC with addition of mixed antibiotics compared to the single antibiotic due to enhanced biodegradation efficiency in both the upper (57.24% of the initial antibiotic concentration) and lower layers (57.07% of the initial concentration) of the antibiotic-polluted soils. Bacterial community diversity in the mixed antibiotic conditions increased, and this likely resulted from the decreased toxicity of intermediates produced during antibiotic biodegradation. Moreover, the addition of mixed antibiotics led to lower risks of ARG release into soil environments, as reflected by higher abundances of host bacteria in the single antibiotic treatment. These results encourage the further development of soil MFC technology for in situ remediation of antibiotic-polluted soils.

Suppression of polycyclic aromatic hydrocarbon formation during pyrolytic production of lignin-based biochar via nitrogen and boron co-doping

Polycyclic aromatic hydrocarbons are toxic byproducts of biochar production. The effects of pyrolysis atmosphere (i.e., N₂ and CO₂) and temperature (i.e., 300-900 °C) and element doping (i.e., N, B, O, and S) on the production of sixteen high priority polycyclic aromatic hydrocarbons in lignin-based biochar was investigated. N₂ atmosphere at 300 °C produced the highest total polycyclic aromatic hydrocarbon content (1698 ± 50 ng/g). Polycyclic aromatic hydrocarbon formation decreased with increase in temperature (31 ± 15 ng/g at 900 °C). CO₂ atmosphere significantly decreased yield of polycyclic aromatic hydrocarbons. The effects of heteroatom doping on polycyclic aromatic hydrocarbon formation were investigated for the first time in the pyrolysis synthesis of lignin-based biochar. N-, B-, O, N-B-, and N-S-doping of biochar reduced polycyclic aromatic hydrocarbon formation by 90, 85, 87, 97, and 89%, respectively. Results bring new insights into the role of heteroatom-doping and pyrolysis conditions in controlling polycyclic aromatic hydrocarbon formation in biochars.

Performance and bacterial community dynamics of lignin-based biochar-coupled calcium peroxide pretreatment of waste-activated sludge for the removal of 4-nonylphenol

Waste activated sludge contaminated with high levels of 4-nonylphenol (4-NP) is a major environmental concern. We have synthesized lignin-based biochar (LGBC) for use as a carbocatalyst in calcium peroxide (CP)-mediated sewage sludge pretreatment. Treatment of sewage sludge with 3.1 × 10^-4 M of CP and 3.0 g L^-1 of LGBC removed 76% of 4-NP in 12 h, which were 3.8 and 2.4 times higher than that with the LGBC and CP alone, respectively. There was synergy between reactive oxygen species (HO•, O₂^•-, and ¹O₂) and graphitic frameworks of LGBC. Pretreatment using the LGBC/CP system enhanced the release of biodegradable organic xenobiotics from the sludge. LGBC/CP enriched Proteobacteria and Thermostilla bacterial consortium (Planctomycetes) in the sludge and promoted 4-NP biodegradation. This work provides new insights into the chemical and biological mechanisms by which LGBC promotes 4-NP biodegradation in waste activated sludge via hydroxyl radical-driven carbon advanced oxidation pretreatment.

Exposure of Goniopora columna to polyethylene microplastics (PE-MPs): Effects of PE-MP concentration on extracellular polymeric substances and microbial community

Although the pollution of coral reefs by microplastics (MPs) is an environmental problem of global significance, the effects of MP concentration on scleractinian corals remain largely underexplored. Herein, we exposed a representative scleractinian coral (Goniopora columna) to different concentrations (5-300 mg L^-1) of polyethylene microplastics (PE-MPs; 40-48 μm) over seven days and evaluated the changes in microbial community and extracellular polymeric substances (EPS) using fluorescence excitation-emission matrix spectroscopy and amplicon sequence variants (ASV). At a PE-MP concentration of 300 mg L^-1, the relative abundance of Bacillus (Firmicutes phylum) and Ruegeria (Proteobacteria phylum) in PE-MP-associated EPS increased and decreased, respectively, while the effects of exposure depended on the particle size of the extracellular polymeric substance (EPS)-based matrix and the humification index. Humic- and fulvic-like substances were identified as critical EPS components produced by microbial activity. The results have shed new insights into short-term responses of G. columna during exposure to different PE-MP concentrations and reveal important coral-MP-microbiome interactions in coral reef ecosystems. Results demonstrated that the coral-MPs interactions should be further evaluated to gain a deeper understanding of the underlying ecotoxicological risks.

Metal-free carbocatalysts derived from macroalga biomass (Ulva lactuca) for the activation of peroxymonosulfate toward the remediation of polycyclic aromatic hydrocarbons laden marine sediments and its impacts on microbial community

Potential toxic chemicals, specifically, polycyclic aromatic hydrocarbons (PAHs), are major sediment contaminants. Herein, green seaweed (Ulva lactuca) was used as a feedstock and pyrolyzed at temperature in the range between 300 and 900 °C. The metal-free carbocatalyst (GSBC) for peroxymonosulfate (PMS) activation to degrade PAHs contaminated sediments was studied. The effects of GSBC‒PMS treatment on microbial community abundance was studied as well. The pyrolysis temperature of GSBC preparation affected the PMS activation performance. Results show that GSBC700 exhibited remarkable catalytic characteristics in PAHs degradation by effective activation of PMS. The results also demonstrated that the sulfate radical-carbon-driven advanced oxidation processes (SR-CAOP) reaction achieved 87% and apparent rate constant (k_obs) of 6.3 × 10^-2 h^-1 of total PAHs degradation in 24 h at 3.3 g/L of GSBC, PMS dose of 1 × 10^-4 M, and pH 3.0. The degradation of 2-, 3-, 4-, 5-, and 6-ring PAHs was 84, 83, 83, 80, and 89%, respectively. The synergetic effect established between GSBC and PMS enhanced the formation of ROSs, namely, SO₄^-, HO, and ¹O₂, which were major species contributing to PAHs degradation. The synergistic effect of π‒π stacking structure and graphitization of GSBC formed electron shuttle, which contributed to PAHs degradation performance. Microbial community structure analyses in the GSBC‒PMS treated sediments showed that the relative abundance of Lactobacillus_rhamnosus species, most of which belonged to the Lactobacillus genus and Firmicutes phylum, which aided in continuing PAHs biodegradation post GSBC‒PMS treatment. Therefore, GSBC can be a promising carbocatalyst produced via biomass-to-biochar conversion as biowaste-to-energy source used in the SR-CAOP-mediated process for sediment remediation.

Advances on tailored biochar for bioremediation of antibiotics, pesticides and polycyclic aromatic hydrocarbon pollutants from aqueous and solid phases

Biochar is gaining incredible importance for remediation applications due to their attractive removal properties. Moreover, it is becoming ecofriendly, cost-effective and sustainable bioadsorbents towards replacing expensive activated carbons. Studies reveal biochar effectiveness for removal of important and potentially severe organic pollutants such as antibiotics and pesticides. Recent research advancements on biochar modification (physical, chemical and biological) opens greater opportunity to form tailored biochar with improved surface properties than their native forms for offering better removal efficiencies. Further attentions paid towards emergent new modification methods to cover broad-spectrum pollutants using tailored biochar. Current review aims to summarize recent updates upon biochar tailoring, comparative account of tailored biochars removal efficiencies with respect to their native forms and to provide in-depth discussion covering specific interactions of tailored biochars with antibiotics, polycyclic aromatic hydrocarbons (PAHs) and pesticides for their effective removals and degradation from polluted environments. Application of inducer compounds e.g., peroxymonosulfate and sodium percarbonate further improved the biochar role towards degradation of toxic organic pollutants into their less or nontoxic forms. Biochar engineered with specific metals enable them for the same role without inducer compounds. Moreover, microbial interactions with biochar not only improve the bioremediation level further but also degrade the pollutants from the environment and open up better environmental and socio-economic prospects. Application of green, cost-effective and sustainable biochar for remediation of environmentally potential organic pollutants offers economical treatment methods as well as safe environment. These benefits are inline with global trends towards developing a sustainable process for biocircular economy.

Manganese oxide-modified biochar: production, characterization and applications for the removal of pollutants from aqueous environments - a review

The development of manganese (Mn) oxides (MnOx) modified biochar (MnOBC) for the removal of pollutants from water has received significant attention. However, a comprehensive review focusing on the use of MnOBC for the removal of organic and inorganic pollutants from water is missing. Therefore, the preparation and characterization of MnOBC, and its capacity for the removal of inorganic (e.g., toxic elements) and organic (e.g., antibiotics and dyes) from water have been discussed in relation to feedstock properties, pyrolysis temperature, modification ratio, and environmental conditions here. The removal mechanisms of pollutants by MnOBC and the fate of the sorbed pollutants onto MnOBC have been reviewed. The impregnation of biochar with MnOx improved its surface morphology, functional group modification, and elemental composition, and thus increased its sorption capacity. This review establishes a comprehensive understanding of synthesizing and using MnOBC as an effective biosorbent for remediation of contaminated aqueous environments.