Development of multiple inhibitor tolerant yeast via adaptive laboratory evolution for sustainable bioethanol production

Mechanism and improvement of yeast tolerance to biomass-derived inhibitors: A review

Lignocellulosic biomass is regarded as a potentially valuable second-generation biorefinery feedstock. Yeast has the ability to metabolize this substrate and convert it into fuel ethanol and an array of other chemical products. Nevertheless, during the pretreatment of lignocellulosic biomass, inhibitors (furanaldehydes, carboxylic acids, phenolic compounds, etc.) are generated, which impede the growth and metabolic activities of yeast cells. Consequently, developing yeast strains with enhanced tolerance to these inhibitors is a crucial technological objective, as it can significantly enhance the efficiency of lignocellulosic biorefineries. This review provides a concise overview of the process of inhibitor generation and the detrimental effects of these inhibitors on yeast. It also summarizes the current state of research on the mechanisms of yeast tolerance to these inhibitors, focusing specifically on recent advances in enhancing yeast tolerance to these inhibitors by rational and non-rational strategies. Finally, it discusses the current challenges and future research directions.

Efficient pretreatment of Phragmites australis biomass using glutamic acid for bioethanol production by a hybrid hydrolysis and fermentation strategy

Microbial fermentation of renewable lignocellulosic biomass to produce biofuels presents significant environmental advantages. The conversion of cellulose and hemicellulose into fermentable sugars provides essential carbon sources for microbial metabolism. However, the recalcitrance of biomass limits enzymatic accessibility. In this study, mild L-glutamic acid (GA) pretreatment was applied to Phragmites australis residues (reed straw) to fractionate lignin and polysaccharides for enhancing enzymatic hydrolysis. Pretreatment with 0.20 mol/L GA at 180 °C for 50 min (logRo = 4.1) achieved glucan recovery and xylan removal rates of 84.2% and 87.8%. Consequently, glucose and total sugar yields reached 75.5 and 71.2%, representing 5.35- and 5.18-fold increases compared to untreated reed. The 28.7 g fermentable sugars with a high glucose-to-xylose ratio (18.1 g/g) were obtained from 100 g reed. The hydrolysates were subsequently used as substrates for bioethanol production by Saccharomyces cerevisiae, which yielded 12.4-32.3 g/L ethanol via separate hydrolysis and fermentation (SHF). By analyzing bioethanol production of SHF and simultaneous saccharification and fermentation (SSF), an optimized hybrid hydrolysis and fermentation (HHF) strategy was developed. Under HHF process, 48.5 g/L of ethanol was achieved from 20 wt% solid loads. This study demonstrates an efficient approach to convert abundant lignocellulosic waste into fermentable sugars and biofuels.

Adaptive evolution of Paecilomyces variotii enhanced the biodetoxification of high-titer inhibitors in pretreated lignocellulosic feedstock

High inhibitor concentrations in lignocellulose feedstock negatively affect the degradation rate of biodetoxification strains. This study designed two adaptive laboratory evolutions in solid substrate and liquid medium to boost the biodetoxification capacity of P. variotii to high titers of lignocellulose-derived inhibitors, resulting in two evolved strains AC70 and ZW70. The results showed that the evolutionary adaptation in liquid medium could better boost the acetic acid assimilation compared to that on solid substrate. Transcriptional analysis revealed that the evolved strains exhibited a significant upregulation of adh, acs, ach1, and ackA directly related to the initial steps of acetate and furan aldehydes metabolisms. ZW70 strain can effectively remove the high concentration inhibitors cocktail from the hydrolysates derived from pretreated wheat straw and furfural residues. The biodetoxified hydrolysates by ZW70 were successfully used for cellulose chiral L-lactic acid production with the titers of ∼110 g/L, which were over 20 % higher than that detoxified by parental strain.

Thermo-adaptive evolution of Corynebacterium glutamicum reveals the regulatory functions of fasR and hrcA in heat tolerance

BACKGROUND

High-temperature fermentation technology is promising in improving fermentation speed and product quality, and thereby widely used in various fields such as food, pharmaceuticals, and biofuels. However, extreme temperature conditions can disrupt cell membrane structures and interfere with the functionality of biological macromolecules (e.g. proteins and RNA), exerting detrimental effects on cellular viability and fermentation capability.

RESULTS

Herein, a microbial thermotolerance improvement strategy was developed based on adaptive laboratory evolution (ALE) for efficient high-temperature fermentation. Employing this strategy, we have successfully obtained Corynebacterium glutamicum strains with superior resistance to high temperatures. Specifically, the genome analysis indicated that the evolved strains harbored 13 missense genetic mutations and 3 same-sense genetic mutations compared to the non-evolved parent strain. Besides, reverse transcription quantitative PCR analysis (RT qPCR) of the hrcA-L119P mutant demonstrated that both groEL genes were upregulated under 42 °C, which enabled the construction of robust strains with improved heat tolerance. Furthermore, a significant increase in FAS-IA and FAS-IB expression of the fasR-L102F strain was proved to play a key role in protecting cells against heat stress.

CONCLUSIONS

This work systematically reveals the thermotolerance mechanisms of Corynebacterium glutamicum and opens a new avenue for revolutionizing the design of cell factories to boost fermentation efficiency.

Advances in the metabolic engineering of Saccharomyces cerevisiae and Yarrowia lipolytica for the production of -carotene

β-Carotene is one kind of the most important carotenoids. The major functions of β-carotene include the antioxidant and anti-cardiovascular properties, which make it a growing market. Recently, the use of metabolic engineering to construct microbial cell factories to synthesize β-carotene has become the latest model for its industrial production. Among these cell factories, yeasts including Saccharomyces cerevisiae and Yarrowia lipolytica have attracted the most attention because of the: security, mature genetic manipulation tools, high flux toward carotenoids using the native mevalonate pathway and robustness for large-scale fermentation. In this review, the latest strategies for β-carotene biosynthesis, including protein engineering, promoters engineering and morphological engineering are summarized in detail. Finally, perspectives for future engineering approaches are proposed to improve β-carotene production.

Transcriptomic profiling of an evolved Yarrowia lipolytica strain: tackling hexanoic acid fermentation to increase lipid production from short-chain fatty acids

BACKGROUND

Short-chain fatty acids (SCFAs) are cost-effective carbon sources for an affordable production of lipids. Hexanoic acid, the acid with the longest carbon chain in the SCFAs pool, is produced in anaerobic fermentation of organic residues and its use is very challenging, even inhibiting oleaginous yeasts growth.

RESULTS

In this investigation, an adaptive laboratory evolution (ALE) was performed to improve Yarrowia lipolytica ACA DC 50109 tolerance to high hexanoic acid concentrations. Following ALE, the transcriptomic analysis revealed several genetic adaptations that improved the assimilation of this carbon source in the evolved strain compared to the wild type (WT). Indeed, the evolved strain presented a high expression of the up-regulated gene YALI0 E16016g, which codes for FAT1 and is related to lipid droplets formation and responsible for mobilizing long-chain acids within the cell. Strikingly, acetic acid and other carbohydrate transporters were over-expressed in the WT strain.

CONCLUSIONS

A more tolerant yeast strain able to attain higher lipid content under the presence of high concentrations of hexanoic acid has been obtained. Results provided novel information regarding the assimilation of hexanoic acid in yeasts.

Unraveling the Genetic Adaptations in Cell Surface Composition and Transporters of Lactiplantibacillus plantarum for Enhanced Acid Tolerance

This study employed adaptive laboratory evolution to improve the acid tolerance of Lactiplantibacillus plantarum, a vital strain in food fermentation and a potential probiotic. Phenotype and genomic analyses identified the overexpression of stress response proteins, ATP synthases, and transporters as pivotal in conferring acid tolerance to the evolved strains. These adaptations led to a shorter lag phase, improved survival rates, and higher intracellular pH values compared to the wild-type strain under acid stress conditions. Additionally, the evolved strains showed an increased expression of genes in the fatty acid synthesis pathway, resulting in a higher production of unsaturated fatty acids. The changes in cell membrane composition possibly prevented H+ influx, while mutant genes related to cell surface structure contributed to observed elongated cells and thicker cell surface. These alterations in cell wall and membrane composition, along with improved transporter efficiency, were key factors contributing to the enhanced acid tolerance in the evolved strains.

Transfer of disulfide bond formation modules via yeast artificial chromosomes promotes the expression of heterologous proteins in Kluyveromyces marxianus

Kluyveromyces marxianus is a food-safe yeast with great potential for producing heterologous proteins. Improving the yield in K. marxianus remains a challenge and incorporating large-scale functional modules poses a technical obstacle in engineering. To address these issues, linear and circular yeast artificial chromosomes of K. marxianus (KmYACs) were constructed and loaded with disulfide bond formation modules from Pichia pastoris or K. marxianus. These modules contained up to seven genes with a maximum size of 15 kb. KmYACs carried telomeres either from K. marxianus or Tetrahymena. KmYACs were transferred successfully into K. marxianus and stably propagated without affecting the normal growth of the host, regardless of the type of telomeres and configurations of KmYACs. KmYACs increased the overall expression levels of disulfide bond formation genes and significantly enhanced the yield of various heterologous proteins. In high-density fermentation, the use of KmYACs resulted in a glucoamylase yield of 16.8 g/l, the highest reported level to date in K. marxianus. Transcriptomic and metabolomic analysis of cells containing KmYACs suggested increased flavin adenine dinucleotide biosynthesis, enhanced flux entering the tricarboxylic acid cycle, and a preferred demand for lysine and arginine as features of cells overexpressing heterologous proteins. Consistently, supplementing lysine or arginine further improved the yield. Therefore, KmYAC provides a powerful platform for manipulating large modules with enormous potential for industrial applications and fundamental research. Transferring the disulfide bond formation module via YACs proves to be an efficient strategy for improving the yield of heterologous proteins, and this strategy may be applied to optimize other microbial cell factories.

Adaptive laboratory evolution to obtain furfural tolerant Saccharomyces cerevisiae for bioethanol production and the underlying mechanism

Introduction

Furfural, a main inhibitor produced during pretreatment of lignocellulose, has shown inhibitory effects on S. cerevisiae.

Method

In the present study, new strains named 12-1 with enhanced resistance to furfural were obtained through adaptive laboratory evolution, which exhibited a shortened lag phase by 36 h, and an increased ethanol conversion rate by 6.67% under 4 g/L furfural.

Results and Discussion

To further explore the mechanism of enhanced furfural tolerance, ADR1_1802 mutant was constructed by CRISPR/Cas9 technology, based on whole genome re-sequencing data. The results indicated that the time when ADR1_1802 begin to grow was shortened by 20 h compared with reference strain (S. cerevisiae CEN.PK113-5D) when furfural was 4 g/L. Additionally, the transcription levels of GRE2 and ADH6 in ADR1_ 1802 mutant were increased by 53.69 and 44.95%, respectively, according to real-time fluorescence quantitative PCR analysis. These findings suggest that the enhanced furfural tolerance of mutant is due to accelerated furfural degradation. Importance: Renewable carbon worldwide is vital to achieve "zero carbon" target. Bioethanol obtained from biomass is one of them. To make bioethanol price competitive to fossil fuel, higher ethanol yield is necessary, therefore, monosaccharide produced during biomass pretreatment should be effectively converted to ethanol by Saccharomyces cerevisiae. However, inhibitors formed by glucose or xylose oxidation could make ethanol yield lower. Thus, inhibitor tolerant Saccharomyces cerevisiae is important to this process. As one of the main component of pretreatment hydrolysate, furfural shows obvious impact on growth and ethanol production of Saccharomyces cerevisiae. To get furfural tolerant Saccharomyces cerevisiae and find the underlying mechanism, adaptive laboratory evolution and CRISPR/Cas9 technology were applied in the present study.

Valorizing spent mushroom substrate into syngas by the thermo-chemical process

This study investigated the conversion of agricultural biomass waste (specifically, spent mushroom substrate) into syngas via pyrolysis. Carbon dioxide was used to provide a green/sustainable feature in the pyrolysis process. All the experimental data highlight the mechanistic role of carbon dioxide (CO2) in the process, demonstrated by the enhanced carbon monoxide (CO) yield from pyrolysis under CO2. Carbon dioxide was indeed reactive at ≥ 500 ˚C. Carbon dioxide was reduced and subsequently oxidized volatiles stemming from the thermolysis of spent mushroom substrate via the gas-phase reaction, thereby resulting in the enhanced formation of CO. Carbon dioxide radically diverted the carbon distribution patterns of the pyrogenic products, as more carbon in the oil was allocated to syngas by the gas-phase reaction of volatiles and CO2. To enhance the mechanistic role of CO2, a Ni-based catalyst was added to the pyrolysis process, which greatly accelerated the gas-phase reaction of volatiles and CO2.

Adaptive laboratory evolution under acetic acid stress enhances the multistress tolerance and ethanol production efficiency of Pichia kudriavzevii from lignocellulosic biomass

Second-generation bioethanol production using lignocellulosic biomass as feedstock requires a highly efficient multistress-tolerant yeast. This study aimed to develop a robust yeast strain of P. kudriavzevii via the adaptive laboratory evolution (ALE) technique. The parental strain of P. kudriavzevii was subjected to repetitive long-term cultivation in medium supplemented with a gradually increasing concentration of acetic acid, the major weak acid liberated during the lignocellulosic pretreatment process. Three evolved P. kudriavzevii strains, namely, PkAC-7, PkAC-8, and PkAC-9, obtained in this study exhibited significantly higher resistance toward multiple stressors, including heat, ethanol, osmotic stress, acetic acid, formic acid, furfural, 5-(hydroxymethyl) furfural (5-HMF), and vanillin. The fermentation efficiency of the evolved strains was also improved, yielding a higher ethanol concentration, productivity, and yield than the parental strain, using undetoxified sugarcane bagasse hydrolysate as feedstock. These findings provide evidence that ALE is a practical approach for increasing the multistress tolerance of P. kudriavzevii for stable and efficient second-generation bioethanol production from lignocellulosic biomass.

Application of adaptive laboratory evolution for Yarrowia lipolytica: A comprehensive review

Adaptive laboratory evolution is an innovative approach utilized by researchers to enhance the characteristics of microorganisms in the field of biology. With the advancement of this technology, it is now being extended to non-model strains. Yarrowia lipolytica, an oleaginous yeast with significant industrial potential, stands out among the non-conventional fungi. However, the activity of Yarrowia lipolytica is frequently affected by specific substances and environmental factors, necessitating the development of techniques to address these challenges. This manuscript provides an overview of adaptive laboratory evolution experiments conducted on Yarrowia lipolytica, and categorizes the contents into two aspects including improving lignocellulose utilization and enhancing the production in Yarrowia lipolytica. Additionally, we selected several representative examples to illustrate how adaptive laboratory evolution can be combined with other techniques to elucidate the potential mechanisms underlying strain evolution. Lastly, we anticipate a promising future for adaptive laboratory evolution technology and Yarrowia lipolytica in tandem.

Microbial co-cultures for biochemicals production from lignocellulosic biomass: A review

Global reliance on fossil oil should shift to cleaner alternatives to get a decarbonized society. One option to achieve this ambitious goal is the use of biochemicals produced from lignocellulosic biomass (LCB). The inherent low biodegradability of LCB and the inhibitory compounds that might be released during pretreatment are two main challenges for LCB valorization. At microbiological level, constraints are mostly linked to the need for axenic cultures and the preference for certain carbon sources (i.e., glucose). To cope with these issues, this review focuses on efficient LCB conversion via the sugar platform as well as an innovative carboxylate platform taking advantage of the co-cultivation of microorganisms. This review discusses novel trends in the use of microbial communities and co-cultures aiming at different bioproducts co-generation in single reactors as well as in sequential bioprocess combination. The outlook and further perspectives of these alternatives have been outlined for future successful development.

Robotic workflows for automated long-term adaptive laboratory evolution: improving ethanol utilization by Corynebacterium glutamicum

BACKGROUND

Adaptive laboratory evolution (ALE) is known as a powerful tool for untargeted engineering of microbial strains and genomics research. It is particularly well suited for the adaptation of microorganisms to new environmental conditions, such as alternative substrate sources. Since the probability of generating beneficial mutations increases with the frequency of DNA replication, ALE experiments are ideally free of constraints on the required duration of cell proliferation.

RESULTS

Here, we present an extended robotic workflow for performing long-term evolution experiments based on fully automated repetitive batch cultures (rbALE) in a well-controlled microbioreactor environment. Using a microtiter plate recycling approach, the number of batches and thus cell generations is technically unlimited. By applying the validated workflow in three parallel rbALE runs, ethanol utilization by Corynebacterium glutamicum ATCC 13032 (WT) was significantly improved. The evolved mutant strain WT_EtOH-Evo showed a specific ethanol uptake rate of 8.45 ± 0.12 mmolEtOH gCDW-1 h-1 and a growth rate of 0.15 ± 0.01 h-1 in lab-scale bioreactors. Genome sequencing of this strain revealed a striking single nucleotide variation (SNV) upstream of the ald gene (NCgl2698, cg3096) encoding acetaldehyde dehydrogenase (ALDH). The mutated basepair was previously predicted to be part of the binding site for the global transcriptional regulator GlxR, and re-engineering demonstrated that the identified SNV is key for enhanced ethanol assimilation. Decreased binding of GlxR leads to increased synthesis of the rate-limiting enzyme ALDH, which was confirmed by proteomics measurements.

CONCLUSIONS

The established rbALE technology is generally applicable to any microbial strain and selection pressure that fits the small-scale cultivation format. In addition, our specific results will enable improved production processes with C. glutamicum from ethanol, which is of particular interest for acetyl-CoA-derived products.

Rapid adaptive evolution of Bacillus coagulans to undetoxified corncob hydrolysates for lactic acid production and new insights into its high phenolic degradation

Here, an adapted Bacillus coagulans (Weizmannia coagulans) strain CC17B-1 was developed for lignocellulosic lactic acid production through a short and rapid adaptive laboratory evolution technique. Without any detoxification, two actual corn cob hydrolysates from the factory were effectively fermented to lactic acid within 60 h. Strain CC17B-1 is capable of degrading all nine determined phenolic compounds in the hydrolysate, with the only exception being vanillic acid. Notably, its tolerances for ferulic acid and p-coumaric acid are the highest doses reported in anaerobic microbes. A proposed degradation pathway showed that strain CC17B-1 could convert phenolic aldehydes to phenolic alcohol and then further degrade them completely. This work provides new ideas for the microbe phenolic degradation pathway and paves the way for industrial lactic acid production from lignocellulosic biomass.

Sugarcane wastes as microbial feedstocks: A review of the biorefinery framework from resource recovery to production of value-added products

Sugarcane industry is a major agricultural sector capable of producing sugars with byproducts including straw, bagasse, and molasses. Sugarcane byproducts are no longer wastes since they can be converted into carbon-rich resources for biorefinery if pretreatment of these is well established. Considerable efforts have been devoted to effective pretreatment techniques for each sugarcane byproduct to supply feedstocks in microbial fermentation to produce value-added fuels, chemicals, and polymers. These value-added chains, which start with low-value industrial wastes and end with high-value products, can make sugarcane-based biorefinery a more viable option for the modern chemical industry. In this review, recent advances in sugarcane valorization techniques are presented, ranging from sugarcane processing, pretreatment, and microbial production of value-added products. Three lucrative products, ethanol, 2,3-butanediol, and polyhydroxyalkanoates, whose production from sugarcane wastes has been widely researched, are being explored. Future studies and development in sugarcane waste biorefinery are discussed to overcome the challenges remaining.

Enhanced cellulosic ethanol production via fed-batch simultaneous saccharification and fermentation of sequential dilute acid-alkali pretreated sugarcane bagasse

This study reports high gravity fed-batch simultaneous saccharification and fermentation (FB-SSF) of sequentially pretreated sugarcane bagasse (SCB) for enhanced bioethanol by employing multiple inhibitor tolerant Kluyveromyces marxianusJKH5 C60. FB-SSF with intermittent feeding of SCB (total 20 % solid loading) and enzyme (total dose of 20 FPU/g) at 6 and 12 h resulted in superior bioethanol production at42 °C. Under optimizedlab-scaleFB-SSF, the maximum ethanoltiter, efficiency and productivities were73.4 ± 1.2 g/L,78 % and 3.0 g/L/h, respectively, after 72 h in presence of inhibitors (acetic acid, furfural, and vanillin at 3, 1, and 1 g/L, respectively). Furthermore, pentose rich dilute acid hydrolysate of SCB was subjected to fermentation by Pichia stipitis NCIM 3499, resulting in ethanol titer of 6.8 g/L. Overall ethanol yield during the developed process was 260.1 g/kg native SCB, which proves industrial potential of the developed bioethanol conversion process.

Adaptive Evolution and Metabolic Engineering Boost Lycopene Production in Saccharomyces cerevisiae via Enhanced Precursors Supply and Utilization

Lycopene is a red carotenoid with remarkable antioxidant activity, which has been widely used in food, cosmetics, medicine, and other industries. Production of lycopene in Saccharomyces cerevisiae provides an economic and sustainable means. Many efforts have been done in recent years, but the titer of lycopene seems to reach a ceiling. Enhancing the supply and utilization of farnesyl diphosphate (FPP) is generally regarded as an efficient strategy for terpenoid production. Herein, an integrated strategy by means of atmospheric and room-temperature plasma (ARTP) mutagenesis combined with H₂O₂-induced adaptive laboratory evolution (ALE) was proposed to improve the supply of upstream metabolic flux toward FPP. Enhancing the expression of CrtE and introducing an engineered CrtI mutant (Y160F&N576S) increased the utilization of FPP toward lycopene. Consequently, the titer of lycopene in the strain harboring the Ura3 marker was increased by 60% to 703 mg/L (89.3 mg/g DCW) at the shake-flask level. Eventually, the highest reported titer of 8.15 g/L of lycopene in S. cerevisiae was achieved in a 7 L bioreactor. The study highlights an effective strategy that the synergistic complementarity of metabolic engineering and adaptive evolution facilitates natural product synthesis.

Recent progress in adaptive laboratory evolution of industrial microorganisms

Adaptive laboratory evolution (ALE) is a technique for the selection of strains with better phenotypes by long-term culture under a specific selection pressure or growth environment. Because ALE does not require detailed knowledge of a variety of complex and interactive metabolic networks, and only needs to simulate natural environmental conditions in the laboratory to design a selection pressure, it has the advantages of broad adaptability, strong practicability, and more convenient transformation of strains. In addition, ALE provides a powerful method for studying the evolutionary forces that change the phenotype, performance, and stability of strains, resulting in more productive industrial strains with beneficial mutations. In recent years, ALE has been widely used in the activation of specific microbial metabolic pathways and phenotypic optimization, the efficient utilization of specific substrates, the optimization of tolerance to toxic substance, and the biosynthesis of target products, which is more conducive to the production of industrial strains with excellent phenotypic characteristics. In this paper, typical examples of ALE applications in the development of industrial strains and the research progress of this technology are reviewed, followed by a discussion of its development prospects.

Physiological and transcriptome analyses of Kluyveromyces marxianus reveal adaptive traits in stress response

Kluyveromyces marxianus is a non-conventional yeast with outstanding physiological characteristics and a high potential for lignocellulosic ethanol production. However, achieving high ethanol productivity requires overcoming several biotechnological challenges due to the cellular inhibition caused by the inhibitors present in the medium. In this work, K. marxianus SLP1 was adapted to increase its tolerance to a mix of inhibitory compounds using the adaptive laboratory evolution strategy to study the adaptation and stress response mechanisms used by this non-Saccharomyces yeast. The fermentative and physiological parameters demonstrated that the adapted K. marxianus P8 had a better response against the synergistic effects of multiple inhibitors because it reduced the lag phase from 12 to 4 h, increasing the biomass by 40% and improving the volumetric ethanol productivity 16-fold than the parental K. marxianus SLP1. To reveal the effect of adaptation process in P8, transcriptome analysis was carried out; the result showed that the basal gene expression in P8 changed, suggesting the biological capability of K. marxianus to activate the adaptative prediction mechanism. Similarly, we carried out physiologic and transcriptome analyses to reveal the mechanisms involved in the stress response triggered by furfural, the most potent inhibitor in K. marxianus. Stress response studies demonstrated that P8 had a better physiologic response than SLP1, since key genes related to furfural transformation (ALD4 and ALD6) and stress response (STL1) were upregulated. Our study demonstrates the rapid adaptability of K. marxianus to stressful environments, making this yeast a promising candidate to produce lignocellulosic ethanol. KEY POINTS: • K. marxianus was adapted to increase its tolerance to a mix of inhibitory compounds • The basal gene expression of K. marxianus changed after the adaptation process • Adapted K. marxianus showed a better physiological response to stress by inhibitors • Transcriptome analyses revealed key genes involved in the stress response.

Whole-crop biorefinery of corn biomass for pullulan production by Aureobasidium pullulans

In the present study, corn starch, cob, and straw were biorefined and used as feedstocks for the production of pullulan. The titer and molecular weight (Mw) of pullulan significantly decreased when corn cob and straw hydrolysates were utilized by the parental strain Aureobasidium pullulans CCTCC M 2012259 (PS). Based on adaptive laboratory evolution of PS, an evolved strain A. pullulans EV6 with strong adaptability to the whole corn biomass hydrolysate and high capability of pullulan biosynthesis was screened. Batch pullulan fermentation results indicated that EV6 produced an increased titer of pullulan with a higher Mw than PS. The underlying reasons for these increases were revealed by assaying key enzymes activities and measuring intracellular uridine diphosphate glucose levels. Subsequently, whole-crop biorefinery of corn biomass was conducted, and the results confirmed that whole corn crop has immense potential for efficient pullulan production.

Contributions of Adaptive Laboratory Evolution towards the Enhancement of the Biotechnological Potential of Non-Conventional Yeast Species

Changes in biological properties over several generations, induced by controlling short-term evolutionary processes in the laboratory through selective pressure, and whole-genome re-sequencing, help determine the genetic basis of microorganism's adaptive laboratory evolution (ALE). Due to the versatility of this technique and the imminent urgency for alternatives to petroleum-based strategies, ALE has been actively conducted for several yeasts, primarily using the conventional species Saccharomyces cerevisiae, but also non-conventional yeasts. As a hot topic at the moment since genetically modified organisms are a debatable subject and a global consensus on their employment has not yet been attained, a panoply of new studies employing ALE approaches have emerged and many different applications have been exploited in this context. In the present review, we gathered, for the first time, relevant studies showing the ALE of non-conventional yeast species towards their biotechnological improvement, cataloging them according to the aim of the study, and comparing them considering the species used, the outcome of the experiment, and the employed methodology. This review sheds light on the applicability of ALE as a powerful tool to enhance species features and improve their performance in biotechnology, with emphasis on the non-conventional yeast species, as an alternative or in combination with genome editing approaches.

A two-prong mutagenesis and adaptive evolution strategy to enhance the temperature tolerance and productivity of Nannochloropsis oculata

Incorporation of microalgae in biorefineries intended to help society reach carbon neutrality is hindered by algal growth inhibition at high temperatures, necessitating the use of costly and carbon-intensive cooling systems. In the present study, a two-prong strategy of random mutagenesis and adaptive laboratory evolution to generate robust thermotolerant strains of Nannochloropsis oculata, was used. The best mutants demonstrated increased productivity at 35 °C, which was 10 °C higher than the optimal temperature of the wild type. In a 2-L photobioreactor at 35 °C, biomass and lipid productivity were 1.43-fold and 2.24-fold higher, respectively, than wild type at 25 °C. Higher pigment and carbohydrate content contributed to the mutants' rapid growth and enhanced photosynthetic efficiency. Metabolomics and lipidomics showed rewiring of the central carbon metabolism and membrane lipid synthesis in thermotolerant strains to ensure cellular homeostasis without compromising productivity. Tagatose and phosphatidylethanolamine upregulation were identified as future genetic targets for further enhancing lipid production.

Strategies to enhance enzymatic hydrolysis of lignocellulosic biomass for biorefinery applications: A review

Global interest in lignocellulosic biorefineries has increased in the recent past due to technological advancements in sustainable and cost-effective production of numerous commodity and speciality chemicals and fuels from renewable lignocellulosic biomass (LCB). As a result, the market value of biorefinery products has also increased over the time, with an estimated worth of USD 867.7 billion by 2025. However, biorefinery operations, especially enzymatic hydrolysis, suffer from many challenges that limits the cost-effectiveness of conversion of LCB. Therefore, it is essential to understand and address these challenges in future biorefineries. The paper focuses on recent trends and challenges in enzymatic hydrolysis of LCB during lignocellulosic biorefinery operation for greener synthesis of energy, fuels, chemicals and other high-value products. Insights into the gaps in knowledge and technological challenges have also been addressed together with focus on future research needs and perspectives of enzymatic hydrolysis of LCB for biorefinery applications.

Production of bioethanol from food waste: Status and perspectives

There is an immediate global requirement for an ingenious strategy for food waste conversion to biofuels in order to replace fossil fuels with renewable resources. Food waste conversion to bioethanol could lead to a sustainable process having the dual advantage of resolving the issue of food waste disposal as well as meeting the energy requirements of the increasing population. Food waste is increasing at the rate of 1.3 billion tonnes per year, considered to be one-third of global food production. According to LCA studies discarding these wastes is detritus to the environment, therefore; it is beneficial to convert the food waste into bioethanol. The CO₂ emission in this process offers zero impact on the environment as it is biogenic. Among several pretreatment strategies, hydrothermal pretreatment could be a better approach for pretreating food waste because it solubilizes organic solids, resulting in an increased recovery of fermentable sugars to produce bioenergy.

Kluyveromyces marxianus as a microbial cell factory for lignocellulosic biomass valorisation

The non-conventional yeast Kluyveromyces marxianus is widely used for several biotechnological applications, mainly due to its thermotolerance, high growth rate, and ability to metabolise a wide range of sugars. These cell traits are strategic for lignocellulosic biomass valorisation and strain diversity prompts the development of robust chassis, either with improved tolerance to lignocellulosic inhibitors or ethanol. This review summarises bioethanol and value-added chemicals production by K. marxianus from different lignocellulosic biomasses. Moreover, metabolic engineering and process optimization strategies developed to expand K. marxianus potential are also compiled, as well as studies reporting cell mechanisms to cope with lignocellulosic-derived inhibitors. The main lignocellulosic-based products are bioethanol, representing 71% of the reports, and xylitol, representing 17% of the reports. K. marxianus also proved to be a good chassis for lactic acid and volatile compounds production from lignocellulosic biomass, although the literature on this matter is still scarce. The increasing advances in genome editing tools and process optimization strategies will widen the K. marxianus-based portfolio products.

Fumarate disproportionation by Geobacter sulfurreducens and its involvement in biocorrosion and interspecies electron transfer

The model electroactive bacterium Geobacter sulfurreducens can acquire electrons directly from solid donors including metals and other species. Reports on this physiology concluding that solid donors are the only electron sources were conducted with fumarate believed to serve exclusively as the terminal electron acceptor (TEA). Here, G. sulfurreducens was repeatedly transferred for adaptation within a growth medium containing only fumarate and no other solid or soluble substrate. The resulting evolved strain grew efficiently with either the C4-dicarboxylate fumarate or malate acting simultaneously as electron donor, carbon source, and electron acceptor via disproportionation. Whole-genome sequencing identified 38 mutations including one in the regulator PilR known to repress the expression of the C4-dicarboxylate antiporter DcuB essential to G. sulfurreducens when growing with fumarate. Futhermore, the PilR mutation was identical to the sole mutation previously reported in an evolved G. sulfurreducens grown in a co-culture assumed to derive energy solely from direct interspecies electron transfer, but cultivated with fumarate as the TEA. When cultivating the fumarate-adapted strain in the presence of stainless steel and fumarate, biocorrosion was observed and bacterial growth was accelerated 2.3 times. These results suggest that G. sulfurreducens can conserve energy concomitantly from C4-dicarboxylate disproportionation and the oxidation of a solid electron donor. This co-metabolic capacity confers an advantage to Geobacter for survival and colonization and explains in part why these microbes are omnipresent in different anaerobic ecosystems.

Advances and Challenges in Biocatalysts Application for High Solid-Loading of Biomass for 2nd Generation Bio-Ethanol Production

Growth in population and thereby increased industrialization to meet its requirement, has elevated significantly the demand for energy resources. Depletion of fossil fuel and environmental sustainability issues encouraged the exploration of alternative renewable eco-friendly fuel resources. Among major alternative fuels, bio-ethanol produced from lignocellulosic biomass is the most popular one. Lignocellulosic biomass is the most abundant renewable resource which is ubiquitous on our planet. All the plant biomass is lignocellulosic which is composed of cellulose, hemicellulose and lignin, intricately linked to each other. Filamentous fungi are known to secrete a plethora of biomass hydrolyzing enzymes. Mostly these enzymes are inducible, hence the fungi secrete them economically which causes challenges in their hyperproduction. Biomass’s complicated structure also throws challenges for which pre-treatments of biomass are necessary to make the biomass amorphous to be accessible for the enzymes to act on it. The enzymatic hydrolysis of biomass is the most sustainable way for fermentable sugar generation to convert into ethanol. To have sufficient ethanol concentration in the broth for efficient distillation, high solid loading ~<20% of biomass is desirable and is the crux of the whole technology. High solid loading offers several benefits including a high concentration of sugars in broth, low equipment sizing, saving cost on infrastructure, etc. Along with the benefits, several challenges also emerged simultaneously, like issues of mass transfer, low reaction rate due to water constrains in, high inhibitor concentration, non-productive binding of enzyme lignin, etc. This article will give an insight into the challenges for cellulase action on cellulosic biomass at a high solid loading of biomass and its probable solutions.

Potential use of microbial engineering in single-cell protein production

Single-cell proteins (SCPs) have been widely used in human food and animal feed applications, still, there are challenges in their production and commercialization. Recently, advances in microbial synthetic biology, genomic engineering, and biofoundry technologies have offered capabilities to effectively and rapidly engineer microorganisms for improving the productivity, nutritional, and functional quality of SCPs. In this review, we discuss various synthetic biology, genomic engineering, and biofoundry tools that can be harnessed for SCP production and genetic modification. We also describe the current and potential applications of genetic modification in producing intermediate feedstocks, as well as biomass-based and multifunctional SCPs. Finally, we discuss the technological and policy-control related challenges encountered when deploying genetic modification in SCP production for animal feed and human food applications.

Consolidated bioprocessing of lignocellulosic biomass: Technological advances and challenges

Consolidated bioprocessing (CBP) is characterized by a single-step production of value-added compounds directly from biomass in a single vessel. This strategy has the capacity to revolutionize the whole biorefinery concept as it can significantly reduce the infrastructure input and use of chemicals for various processing steps which can make it economically and environmentally benign. Although the proof of concept has been firmly established in the past, commercialization has been limited due to the low conversion efficiency of the technology. Either a native single microbe, genetically modified microbe or a consortium can be employed. The major challenge in developing a cost-effective and feasible CBP process is the recognition of bifunctional catalysts combining the capability to use the substrates and transform them into value-added products with high efficiency. This article presents an in-depth analysis of the current developments in CBP around the globe and the possibilities of advancements in the future.

Evolutionary Adaptation by Repetitive Long-Term Cultivation with Gradual Increase in Temperature for Acquiring Multi-Stress Tolerance and High Ethanol Productivity in Kluyveromyces marxianus DMKU 3-1042

During ethanol fermentation, yeast cells are exposed to various stresses that have negative effects on cell growth, cell survival, and fermentation ability. This study, therefore, aims to develop Kluyveromyces marxianus-adapted strains that are multi-stress tolerant and to increase ethanol production at high temperatures through a novel evolutionary adaptation procedure. K. marxianus DMKU 3-1042 was subjected to repetitive long-term cultivation with gradual increases in temperature (RLCGT), which exposed cells to various stresses, including high temperatures. In each cultivation step, 1% of the previous culture was inoculated into a medium containing 1% yeast extract, 2% peptone, and 2% glucose, and cultivation was performed under a shaking condition. Four adapted strains showed increased tolerance to ethanol, furfural, hydroxymethylfurfural, and vanillin, and they also showed higher production of ethanol in a medium containing 16% glucose at high temperatures. One showed stronger ethanol tolerance. Others had similar phenotypes, including acetic acid tolerance, though genome analysis revealed that they had different mutations. Based on genome and transcriptome analyses, we discuss possible mechanisms of stress tolerance in adapted strains. All adapted strains gained a useful capacity for ethanol fermentation at high temperatures and improved tolerance to multi-stress. This suggests that RLCGT is a simple and efficient procedure for the development of robust strains.

A review on global perspectives of sustainable development in bioenergy generation

Over the last few decades, the globe has much relied on fossil fuels; however, environmental concerns forced the World to look at biofuel as an alternative for stable economic development. Biofuel also facilitates national energy security maintenance and reduces environmental complications. The present study is focused on an in-depth analysis of bioenergy policy measures undertaken by various federal agencies of different countries in order to shed light on the bottlenecks that impede biofuel's growth as a sustainable and alternative fuel. An in-depth assessment of feedstock utilization, blending targets, and policy assistance schemes have been thoroughly reviewed. In addition, the potential of commercial firms for the production of bioenergy is highlighted in order to grasp the current bioenergy market scenario better. Finally, the article is concluded with the viewpoints of the authors to address the standing issues of global bioenergy generation.