A novel process of salt tolerance partial denitrification and anammox (ST-PDA) for treating saline wastewater

Enhanced denitrification under saline Conditions: Glycine betaine as a key osmoprotectant

Biological denitrification is significantly inhibited by salinity, which adversely affects microbial activity and reduces efficiency. This study aimed to evaluate the impact of salinity on denitrification performance and assess the potential of glycine betaine (GB) as an osmotic pressure regulator and protective agent. Results indicated that under the optimal conditions, including an influent nitrate concentration of 51.03 mg L-1, C/N ratio of 5.42, pH value of 8.95, and salinity of 1.05 %, the nitrate removal efficiency was predicted to reach 100 %. However, a sharp decline (56.09 ± 4.52 %) in nitrate removal efficiency occurred when salinity increased from 0 % to 3 % within the initial 6 h. This inhibition was mitigated by adding 25 mg L-1 GB, which enhanced nitrate removal efficiency by 2.19 times. GB promoted the secretion of extracellular polymeric substances (EPS), especially polymeric protein, a critical contributor to salinity resistance. Metagenomics analysis revealed that GB improved denitrification process by upregulating key genes involved in nitrogen and carbon metabolism. Furthermore, the relative abundance of Na+ transporter genes, K+ transporter genes, and GB absorption and synthesis genes rose with GB addition, underscoring the indispensable role of GB in alleviating osmotic stress and accelerating microbial metabolism. These findings emphasize the detrimental effects of salinity on denitrification and demonstrate the potential of GB as an osmoprotectant, enabling efficient nitrogen removal under saline conditions.

Insight into enhanced enrichment and nitrogen removal performance of Anammox bacteria with novel biochar/tourmaline polyurethane sponge modified biocarrier

A novel biochar/tourmaline polyurethane sponge modified biocarrier (BTP) could enhance Anammox bacteria (AnAOB) enrichment and nitrogen removal performance. With higher hydrophilicity and specific surface area, BTP significantly improved total inorganic nitrogen (TIN) removal efficiency to 80 ± 2 %, compared to unmodified biocarrier of 67 ± 3 % when influent TIN reached 633.9 ± 22.0 mg/L. BTP stimulated the upregulation of amino acid synthases genes abundance and improved protein secretion in extracellular polymer substances (EPS). Moreover, significant increases were found in heme concentration, specific anammox activity and hydrazine dehydrogenase of AnAOB with BTP compared to unmodified biocarrier. Extracellular electron transfer pathway of AnAOB was improved by BTP via upregulating cytochrome C and ferredoxin synthesis. Candidatus Brocadia was the main genus in Anammox biofilm, with relative abundance of 20.1 % and 27.6 % in the control and BTP, respectively, which explained the improvement of nitrogen removal performance.

Anammox-based technologies: A review of recent advances, mechanism, and bottlenecks

The removal of nitrogen via the ANAMMOX process is a promising green wastewater treatment technology, with numerous benefits. The incessant studies on the ANAMMOX process over the years due to its long start-up and high operational cost has positively influenced its technological advancement, even though at a rather slow pace. At the moment, relatively new ANAMMOX technologies are being developed with the goal of treating low carbon wastewater at low temperatures, tackling nitrite and nitrate accumulation and methane utilization from digestates while also recovering resources (phosphorus) in a sustainable manner. This review compares and contrasts the handful of ANAMMOX -based processes developed thus far with plausible solutions for addressing their respective bottlenecks hindering full-scale implementation. Ultimately, future prospects for advancing understanding of mechanisms and engineering application of ANAMMOX process are posited. As a whole, technological advances in process design and patents have greatly contributed to better understanding of the ANAMMOX process, which has greatly aided in the optimization and industrialization of the ANAMMOX process. This review is intended to provide researchers with an overview of the present state of research and technological development of the ANAMMOX process, thus serving as a guide for realizing energy autarkic future practical applications.

New insights into biofilm formation and microbial communities in hybrid constructed wetlands with functional substrates for treating contaminated surface water

In this study, hybrid constructed wetlands (HCW) with functional substrates (vermiculite-tourmaline modified polyurethane) were constructed to investigate nitrogen removal efficiency and metabolic cooperation mechanisms for treating rural contaminated surface water with natural temperature fluctuations. The results show that within a natural temperature fluctuation range of 9-25 °C, the HCW achieved an average nitrate nitrogen removal efficiency of 98 % and a total nitrogen removal efficiency of 76 %, with effluent total nitrogen less than 5 mg/L. The rational secretion of extracellular polymeric substance and the analysis of microbial community structure revealed that functional substrate favors biofilm formation, increases the activity of Candidatus_Brocadia and Thauera, and enhances ammonia and nitrate reduction. These findings elucidate the ecological patterns exhibited by microorganisms during the process of functional substrate intensification. Overall, this study offers valuable guidance for constructing HCW to treat contaminated surface water.

Increasing biomass concentration facilitates simultaneous nitrogen removal and sludge reduction under low C/N conditions

To overcome the issues of limited carbon source and high sludge production in partial denitrification/anammox (PD/A) process, the effects of mixed liquor suspended solids (MLSS) and carbon/nitrogen ratio (C/N) on PD/A were investigated through parallel experiments. Nitrogen removal efficiencies decreased significantly when C/N was reduced (1.5 → 0.75). When MLSS was doubled, the nitrogen removal efficiencies in the two parallel reactors increased from 75.3 %, 72.9 % to 86.9 %, 89.7 %, respectively, and sludge yields decreased obviously. Combining with in-situ test, it was speculated when MLSS increased, fermentation was enhanced, providing substrate for partial denitrification. Thauera, involved in partial denitrification, decreased obviously with reduced C/N, but increased from 9.93 % to 38.16 % when MLSS doubled, which could promote the PD/A process. Terrimonas and Ignavibacterium (fermentative bacteria) increased from 1.26 %, 5.22 % to 6.62 %, 6.30 %, respectively. These results proved that increasing MLSS under low C/N ratios promoted fermentation in PD/A system, facilitating efficient nitrogen removal and sludge reduction.

Pilot-scale implementation of mainstream anammox for municipal wastewater treatment against cold temperature

Applying anammox to municipal wastewater treatment promises enormous energy and resource savings; however, seasonally cold conditions pose a considerable challenge, impeding its future applications towards non-tropical regions. In this study, we establish a pilot-scale wastewater treatment plant (50 m3/d) in northern China and implement the partial denitrification coupling anammox process on actual municipal wastewater. Despite seasonal cooling, the nitrogen removal efficiency remains high, ranging from 75.0 ± 4.6% at 27.8-20.0 °C to 70.4 ± 4.5% at 10-7.5 °C. This process exhibits remarkable low-temperature tolerance, achieving an in-situ anammox rate of 32.7 ± 4.7 g-N/(m3·d) at 10-7.5 °C and contributing up to 39.7 ± 6.7% to nitrogen removal. Further 15N stable isotope tracing and kinetic tests reveal that the partial denitrification is capable of supplying increasingly abundant NO2- to anammox with decreasing temperature, enabling robust mainstream anammox against seasonal cooling. From 27.8 °C to 7.5 °C, anammox bacteria not only survive but thrive under mainstream conditions, with absolute and relative abundances increasing by 429.1% and 343.5%, respectively. This pilot-scale study sheds fresh light on extending mainstream anammox towards non-tropical regions, taking a necessary step forward toward the sustainability goals of the wastewater treatment sector.

Deciphering the influence of salinity stress on the biological aniline degradation system: Pollutants degradation performance and microbial response

In order to evaluate the impact of salinity gradients on the aniline biodegradation system, six reactors at salinity concentrations (0%-5%) were established. The results presented the salinity except for 5% imposed negligible effects on aniline degradation performance. Nitrification had prominent resistance to salinity (0%-1.5%) while were significantly restrained when salinity increased. The total nitrogen (TN) removal efficiency of Z4 (1.5%) was 20.5% higher than Z1 (0%) during the stable operation phase. Moreover, high throughput sequencing analysis showed that halophilic bacterium, such as Halomonas, Rhodococcus, remained greater survival advantages in high salinity system. The substantial enrichment of Flavobacterium, Dokdonella, Paracoccus observed in Z4 ensured its excellent nitrogen removal performance. The close cooperation among dominant functional bacteria was strengthened when salt content was below 1.5% while exceeding 1.5% led to the collapse of metabolic capacity through integrating the toxicity of aniline and high osmotic pressure.

Enhance PD/A biofilm formation via a novel biochar/tourmaline modified-biocarriers to treat low-strength contaminated surface water: Initial adhesion and high-substrate microenvironment

In this work, a novel polyurethane carrier modified with biochar and tourmaline/zeolite powder at ratio of 1:1 and 1:2 was developed to promote the formation of biofilms and the synergy of overall bacterial activity for Partial Denitrification/Anammox to treat low-nitrogen contaminated surface water. Based on the batch experiment, the modified biocarrier, BTP2 (biochar: tourmaline = 2: 1), exhibited the highest total nitrogen removal efficiency (83.63%) under influent total nitrogen of 15 mg/L and COD/NO3- of 3. The dense biofilm was formed in inner side of biocarrier owing to the increased surface roughness and various functional groups suggested by scanning electron microscopy and Fourier-transform infrared analysis. The EPS content increased from 200.15 to 220.26 mg/g VSS in BTP2 system. Besides, the rapid NH4+ capture and organics release of the modified carrier fueled the growth of anammox and denitrification bacteria, with the activity of 2.13 ± 0.52 mg N/gVSS/h and 6.70 ± 0.52 mg N/gVSS/h (BTP2). High-throughput sequencing unraveled the increased abundances of Candidatus_Competibacter (0.82%), Thauera (0.60%) and Candidatus_Brocadia (0.55%) which was responsible for the synergy of incomplete reduction of NO3- to NO2- and NH4+ oxidation. Overall, this study provided a valid and simple-control guide for biofilm formation towards rapid enrichment and great collaboration of Anammox and denitrification bacteria.

Novel and innovative approaches to partial denitrification coupled with anammox: A critical review

The partial denitrification (PD) coupled with anaerobic ammonium oxidation (Anammox) (PD/A) process is a unique biological denitrification method for sewage that concurrently removes nitrate (NO3--N) and ammonium (NH4+-N) in sewage. Comparing PD/A to conventional nitrification and denitrification technologies, noticeable improvements are shown in energy consumption, carbon source demand, sludge generation and emissions of greenhouse gasses. The PD is vital to obtaining nitrites (NO2--N) in the Anammox process. This paper provided valuable insight by introduced the basic principles and characteristics of the process and then summarized the strengthening strategies. The functional microorganisms and microbial competition have been discussed in details, the S-dependent denitrification-anammox has been analyzed in this review paper. Important factors affecting the PD/A process were examined from different aspects, and finally, the paper pointed out the shortcomings of the coupling process in experimental research and engineering applications. Thus, this research provided insightful information for the PD/A process's optimization technique in later treating many types of real and nitrate-based wastewater. The review paper also provided the prospective economic and environmental position for the actual design implementation of the PD/A process in the years to come.

Nitrogen removal and carbon reduction of mature landfill leachate under extremely low dissolved oxygen conditions by simultaneous partial nitrification anammox and denitrification

In this study, a SNAD-SBBR process was implemented to achieve ammonia removal and carbon reduction of mature landfill leachate under extremely low dissolved oxygen conditions (0.051 mg/L) for a continuous operation of 266 days. The process demonstrated excellent removal performance, with ammonia nitrogen removal efficiency reaching 100 %, total nitrogen removal efficiency reaching 87.56 %, and an average removal rate of 0.180 kg/(m3·d). The recalcitrant organic compound removal efficiency reached 34.96 %. Nitrogen mass balance analysis revealed that the Anammox process contributed to approximately 98.1 % of the nitrogen removal. Candidatus Kuenenia achieved a relative abundance of 1.49 % in the inner layer of the carrier. In the SNAD-SBBR system, the extremely low DO environment created by the highly efficient partial nitrification stage enabled the coexistence of AnAOB, denitrifying bacteria, and Nitrosomonas, synergistically achieving ammonia removal and carbon reduction. Overall, the SNAD-SBBR process exhibits low-cost and high-efficiency characteristics, holding tremendous potential for landfill leachate treatment.

Granulation characteristics of anammox sludge in response to different signal-molecule-stimulants; mediated through programmed cell death

During the anammox process, mitigation of biomass washout to increase sludge retention is an important parameter of process efficiency. Signal molecular stimulants (SMS) initiate the sludge granulations controlled by programmed cell death (PCD) of microorganisms. In this study, the aerobic granular sludge (AGS), cell fragments, extracellular polymeric substances (EPS), and AGS process effluent were tested as SMS to identify their effect on anammox granulation. The results showed that the addition of SMS increased the nitrogen removal efficiency to varying degrees, whereas the addition of AGS process supernatant, as SMS, increased the ammonia removal efficiency up to 96%. The addition of SMS was also found to increase EPS production and contributed to sludge granulation. In this process, the proportion of PCD increased and both Gaiella and Denitratisoma abundance increased from 3.54% to 5.59%, and from 1.8% to 3.42%, respectively. In conclusion, PCD was found important to increase anaerobic ammonia oxidation performance through the granulation mechanism.

Development of partial denitrification process in upflow-anaerobic sludge blanket and effect of electric field on partial denitrification performance

Partial denitrification (PD) is an alternative to providing NO2- for the anaerobic ammonium oxidation (anammox) process. In this study, three upflow anaerobic sludge blankets (UASB) were used to investigate the effect of an external electric field on PD performance. The results indicated that the maximum nitrite transformation ratio (NTR) reached 76.3 %, with an average NTR of 54.1 %, in the presence of external electric field, whereas the average NTR of the control was only 49.8 %. The fitted maximum specific nitrate reduction rates of PD1, PD2, and PD3 were 83.7, 90.5, and 92.3 mg N g-1VSS h-1, respectively, according to the Haldane model analysis. Microbial community analysis demonstrated that the abundance of Thauera, Comamonas, and Accumulibacter increased with electric assistance. In summary, UASB reactor with electrodes set in the upper region was most feasible for the stable PD process, providing an alternative for developing a coupled PD-anammox process.

Rapid formation of denitrification granules for nitrite accumulation by increasing nitrogen loading rates and resistance to industrial wastewater

The nitrite (NO2-) accumulation in partial denitrification (PD) offers the possibility of widespread application of anammox process. In this study, the rapid establishment of PD granular system was achieved by increasing nitrogen loading rates (NLR) from 0.9 to 4.8 kg N/(m3·d), with the nitrate-to-nitrite transforming ratio (NTR) increasing rapidly to 87.0 % within 18 days. Growth evidence indicated that the functional genus Thauera was significantly enriched (12.5 %→76.4 %), with nitrate (NO3-) reduction rates (SNO3) improving by 5.4 times from 13.0 to 70.7 mg N/(g VSS·h). Importantly, the rapid aggregation of PD biomass as granules ensured robustness and resistance of PD feeding with the electroplating tail wastewater (NO3--N of 103.0 ± 5.0 mg/L), obtaining stable NTR above 91.5 %. This study demonstrated the achievability of the fast development of PD granules and the adaptability and robustness of treating nitrate-containing industrial wastewater, which provided a promising method for efficient nitrogen transformation in industrial applications.

Improving denitrification performance of biofilm technology with salt-tolerant denitrifying bacteria agent for treating high-strength nitrate and sulfate wastewater from lab-scale to pilot-scale

This study focused on the application of salt-tolerant denitrifying bacteria (DBA) in an optimized biofilm process to treat high sulfate-nitrate wastewater from lab-scale to pilot-scale. Lab-scale results demonstrated the salinity, DBA inoculum, supplementary carbon and phosphorus source significantly varied the startup periods at the range of 36-74 d, and the optimum initial start-up conditions were as follows: >0.6 g/L of DBA, 2-4 of C/N ratio, 0.3-0.6 mg/L of phosphorus and a salinity-gradient domestication method. A pilot scale of biofilm technology with DBA was further developed for treating real wastewater from the desulfuration and denitration with both high nitrate (≈200 mg/L) and sulfate (2.7%). The denitrification efficiency reached above 90% after one-month gradient-salinity of 0.5%-2.7%. Mature biofilm had dominant genera Hyphomicrobium (31.80%-61.35%), Methylotenera (0.85%-20.21%) and Thauera (1.42%-8.40%), etc. Notably, the largest genera Hyphomicrobium covered the complete denitrification genes.

A review of microbial nitrogen transformations and microbiome engineering for biological nitrogen removal under salinity stress

The osmotic stress caused by salinity exerts severe inhibition on the process of biological nitrogen removal (BNR), leading to the deterioration of biosystems and the discharge of nitrogen with saline wastewater. Feasible strategies to solve the bottleneck in saline wastewater treatment have attracted great attention, but relevant studies to improve nitrogen transformations and enhance the salt-tolerance of biosystems in terms of microbiome engineering have not been systematically reviewed and discussed. This work attempted to provide a more comprehensive explanation of both BNR and microbiome engineering approaches for saline wastewater treatment. The effect of salinity on conventional BNR pathways, nitrification-denitrification and anammox, was summarized at cellular and metabolic levels, including the nitrogen metabolic pathways, the functional microorganisms, and the inhibition threshold of salinity. Promising nitrogen transformations, such as heterotrophic nitrification-aerobic denitrification, ammonium assimilation and the coupling of conventional pathways, were introduced and compared based on advantages and challenges in detail. Strategies to improve the salt tolerance of biosystems were proposed and evaluated from the perspective of microbiome engineering. Finally, prospects of future investigation and applications on halophilic microbiomes in saline wastewater treatment were discussed.

Novel nitrogen removal process in marine aquaculture wastewater treatment using Enteromorpha ferment liquid as carbon

The process performance of partial denitrification of a novel anaerobic fermentation integrated fixed-film activated sludge (IFAS-AFPD) of Enteromorpha was studied. The response surface method was used to determine the optimal reaction conditions, and the operation experiment was carried out under the optimal conditions. The results showed that the nitrogen removal effect was the best when the salinity was 12.2 g•L^-1, the Carbon-Nitrogen ratio (C/N) was 4, the pH was 8.5, and the Nitrite Accumulation Rate, Nitrate Removal Rate, Chemical Oxygen Demand Utilization Rate could reach 77%, 89% and 51%. Experimental results have shown that the NAR of the Enteromorpha ferment liquid system could be maintained at about 74%, which was noteworthy higher than that of the sodium acetate (CH₃COONa) system at 42%; Microbial community analysis showed that Enteromorpha ferment liquid was more beneficial to the growth of Bacteroidetes than CH₃COONa.

Treatment performance of multistage active biological process (MSABP) reactor for saline sauerkraut wastewater: acclimatization, optimization and improvement

The wastewater with a high concentration of organics and salt is a major contaminant in the production of sauerkraut. In this study, a multistage active biological process (MSABP) system was constructed to treat sauerkraut wastewater. The key process parameters of the MSABP system were analyzed and optimized by response surface methodology. The optimization results indicated that the most optimal removal efficiencies and removal loading rates of chemical oxygen demand (COD) and NH₄⁺-N were 87.9%, 95.5%, 2.11 kg·m^-3·d^-1 and 0.12 kg·m^-3·d^-1, respectively, with hydraulic retention time (HRT) of 2.5 d and pH of 7.3. Meanwhile, this system could also be improved for the further treatment of COD and total nitrogen by effluent recycle and ozone oxidation. The COD and total nitrogen removal efficiencies of the modified MSABP system were 99.9% and 60.2%, respectively. In addition, the modified system could also reduce the potential harm from high concentrations of NO₂^--N.

Efficient biodegradation of acetoacetanilide in hypersaline wastewater with a synthetic halotolerant bacterial consortium

The high concentrations of salt and refractory toxic organics in industrial wastewater seriously restrict biological treatment efficiency and functional stability. However, how to construct a salt-tolerant biocatalytic community and realize the decarbonization coupled with detoxification toward green bio-enhanced treatment, has yet to be well elucidated. Here, acetoacetanilide (AAA), an important intermediate for many dyes and medicine synthesis, was used as the model amide pollutant to elucidate the directional enrichment of halotolerant degradative communities and the corresponding bacterial interaction mechanism. Combining microbial community composition and molecular ecological network analyses as well as the biodegradation efficiencies of AAA and its hydrolysis product aniline (AN) of pure strains, the core degradative bacteria were identified during the hypersaline AAA degradation process. A synthetic bacterial consortium composed of Paenarthrobacter, Rhizobium, Rhodococcus, Delftia and Nitratireductor was constructed based on the top-down strategy to treat AAA wastewater with different water quality characteristics. The synthetic halotolerant consortium showed promising treatment ability toward the simulated AAA wastewater (AAA 100-500 mg/L, 1-5% salinity) and actual AAA mother liquor. Additionally, the comprehensive toxicity of AAA mother liquor significantly reduced after biological treatment. This study provides a green biological approach for the treatment of hypersaline and high concentration of organics wastewater.

An integrated process for struvite recovery and nutrient removal from ship domestic sewage

Marine pollution caused by the untreated and substandard discharge of ship domestic sewage has received widespread attention. A novel integrated process for struvite recovery and nutrient removal from ship domestic sewage (SRNR-SDS) based on seawater magnesium source was developed in this study. Removal efficiencies of the total nitrogen (TN) and total phosphorus (TP) for the activated sludge unit in SRNR-SDS process were approximately 67.61% and 41.35%, respectively, under the salinity of 7.85 g/L. The coupling-induced struvite crystallization unit significantly improved the removal efficiency of TN and TP, and the scanning electron microscopy and X-ray diffraction demonstrated that magnesium ammonium phosphate (MAP) crystals were successfully formed on the surface of zeolite. The SRNR-SDS process had an ideal performance for pollutant removal and MAP recovery under the optimal hydraulic retention time of 20 h. The effluent concentrations of COD, NH₄⁺-N, TN and TP in SRNR-SDS process were approximately 34.73 mg/L, 4.31 mg/L, 10.07 mg/L and 0.23 mg/L, respectively, which meet the Chinese and international ship sewage discharge standards. SRNR-SDS process has obvious environmental, social and economic benefits, which could save 6.20%∼57.14% of the operation cost of ship domestic sewage treatment via MAP recovery. The results could provide theoretical and technical support for the development and application of ship sewage treatment process with the functions of pollutant removal and resource recovery.

Continuous plug-flow anammox system for mature landfill leachate treatment: Key zone for anammox pathway

This study established the one-stage partial nitrification coupled anammox and partial denitrification coupled anammox process in an anoxic/oxic continuous plug-flow system and operated for 465 days to treat mature landfill leachate. 97.9 %-98.1 % of inorganic nitrogen was removed when the nitrogen loading rate was maintained at 0.33-0.36 kg N/m³/d, and a high anammox contribution to nitrogen removal (89.8 %-92.4 %) was achieved. The long-term in-situ free ammonia (FA) anoxic treatment contributed to the stable performances of partial nitrification and in-situ fermentation. The employed integrated fixed-film activated sludge technology favored the enrichment of hzsA, hzsB, hdh, amoA, hao, narG, and napA functional genes. The oxic zone, particularly oxic biofilm, was the key zone for anammox pathway, where Candidatus_Kuenenia (from 1.6 % to 8.3 %) with high tolerance to FA and salinity stress outcompeted Candidatus_Brocadia (from 18.3 % to 0.1 %) as the dominant anammox bacteria. This study could provide guidance for anammox-mediated landfill leachate treatment in practical projects.

A review of anammox-based nitrogen removal technology: From microbial diversity to engineering applications

The anaerobic ammonium oxidation (anammox) process has the advantages of high efficiency and low energy consumption, so it has broad application prospects in biological denitrification of wastewater. However, the application of anammox technology to existing wastewater treatment is still challenging. The main problems are the insufficient supply of nitrite and the susceptibility of anammox bacteria to environmental factors. In this paper, from the perspective of the diversity of anammox bacteria, the habitats and characteristics of anammox bacteria of different genera were compared. At the same time, laboratory research and engineering applications of anammox technology in treating wastewater from different sources were reviewed, and the progress of and obstacles to the practical application of anammox technology were clarified. Finally, a focus for future research was proposed to intensively study the water quality barrier factors of anammox and its regulation strategies. Meanwhile, a combined process was developed and optimized on this basis.

A review of enhanced municipal wastewater treatment through energy savings and carbon recovery to reduce discharge and CO2 footprint

Municipal wastewater treatment that mainly performed by conventional activated sludge (CAS) process faces the challenge of intensive aeration-associated energy consumption for oxidation of organics and ammonium, contributing to significant directly/indirectly greenhouse gas (GHG) emissions from energy use, which hinders the achievement of carbon neutral, the top priority mission in the coming decades to cope with the global climate change. Therefore, this article aimed to offer a comprehensive analysis of recently developed biological treatment processes with the focus on reducing discharge and CO2 footprint. The biotechnologies including "Zero Carbon", "Low Carbon", "Carbon Capture and Utilization" are discussed, it suggested that, by integrating these processes with energy-saving and carbon recovery, the challenges faced in current wastewater treatment plants can be overcome, and a carbon-neutral even be possible. Future research should investigate the integration of these methods and improve anammox contribution as well as minimize organics lost under different scales.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Exploring the potential of a newly constructed manganese peroxidase-producing yeast consortium for tolerating lignin degradation inhibitors while simultaneously decolorizing and detoxifying textile azo dye wastewater

MnP-YC4, a newly constructed manganese peroxidase-producing yeast consortium, has been developed to withstand lignin degradation inhibitors while degrading and detoxifying azo dye. MnP-YC4 tolerance to major biomass-derived inhibitors was promising. MnP induced by lignin was found to be highly related to dye decolorization by MnP-YC4. Simulated azo dye-containing wastewater supplemented with a lignin co-substrate (3,5-Dimethoxy-4-hydroxybenzaldehyde) decolorized up to 100, 91, and 76% at final concentrations of 20, 40, and 60%, respectively. MnP-YC4 effectively decolorized the real textile wastewater sample, reaching up to 91.4%, and the COD value decreased significantly during the decolorization, reaching 7160 mg/l within 7 days. A possible dye biodegradation pathway was proposed based on the degradation products identified by UV-vis, FTIR, GC/MS, and HPLC techniques, beginning with azo bond cleavage and eventually mineralized to CO₂ and H₂O. When compared to the phytotoxic original dye, the phytotoxicity of MnP-YC4 treated dye-containing wastewater samples confirmed the nontoxic nature.

Culturing partial denitrification biofilm in side stream incubator with ordinary activated sludge as inoculum: One step closer to mainstream Anammox upgrade

Recently, adding carriers into anoxic zone is proposed for mainstream Anammox upgrade, which relied on the denitrifiers responsible for partial denitrification (PD) to generate essential nitrite for Anammox bacteria. Still, their low abundance in the naturally formed biofilm leads to insufficient nitrite supply. This study investigated the sequential culturing of PD biofilm. By inoculating ordinary activated sludge, the PD process was quickly established within 54-day. During that, decreasing carbon to nitrogen ratio and anoxic duration in order might be effective strategies. Adding carriers shifted the microbial community, especially the proliferation of Flavobacterium. When solely using the mature PD biofilm, high nitrate to nitrite transformation ratio (>70%) was obtained. Meanwhile, both nitrate-reducing and nitrite-generating processes slowed down and lasted ∼90 min. In addition, abundant Simplicispira candidate for PD was detected in biofilm. This study also suggests that regularly harvesting PD-related functional bacteria from a side-stream incubator promotes mainstream Anammox upgrade.

A novel stable nitritation process: Treating sludge by alternating free nitrous acid/heat shock

The feasibility of stable nitritation of sludge alternately treated by free nitrous acid (FNA) and heat shock in a sequencing batch reactor (SBR) was investigated in this study. The linear regression method was used to determine the optimal treatment conditions. Results revealed that an FNA concentration of 2.20 mg HNO₂-N/L, exposure time of 24 h, and treatment ratio of 20% could inhibit nitrite oxidizing bacteria (NOB) activity to the greatest extent while maintaining the maximum ammonium oxidizing bacteria (AOB) activity; after heat shock at 60 °C for 20 min, NOB were inhibited while AOB still had certain activity. In the long-term continuous-flow experiment, the single FNA or heat shock treatments easily allowed adapt NOB to affect the stability of nitritation. The alternating FNA/heat shock treatment can achieve long-term stability of nitritation. Microbial community analysis revealed that the alternating FNA/heat shock treatment could inhibit NOB while maintaining high AOB abundance.