Improved decolorization and mineralization of azo dye in an integrated system of anaerobic bioelectrochemical modules and aerobic moving bed biofilm reactor

Molecular insights into dye decolorization performance and mechanisms under carbon limited conditions in a membrane aeration-based bioelectrochemical system

Bioelectrochemical systems (BES) is a promising strategy for azo dyes decolorization enhancement in carbon-limited condition, but decolorization products need further aerobic mineralization. Here, a counter-diffusion biofilm-supported BES (E-MABR) was designed to achieve the decolorization, mineralization and denitrogenation of Alizarin Yellow R (AYR) in electron-deficient wastewater. The introduction of electrodes facilitated the secretion of extracellular polymeric substances (EPS), particularly proteins (PN), whose content in the cathodic biofilm was 2.5 ± 0.2 times higher than that in the MABR. Additionally, electrical stimulation enriched electroactivity bacteria (e.g. Geobacter) and azo dyes metabolism contributor (e.g., Thauera and Dechloromonas), and significantly upregulated the expression of decolorization-related genes, particularly azoR (1.2 log2) in the cathodic biofilm. The increased β-sheet proportions of protein structures in the anode (22.2 ± 1.5 %) and cathode (20.1 ± 1.7 %) promoted the exposure of hydrophobic groups in amino acid; consequently, more hydrogen bonds formed, leading to stronger hydrophobic interactions in molecular dynamic simulations. Under the electric field stress, the total binding free energy between azoR and AYR declined to -32.6 kJ·mol⁻¹, enhancing the stability of the complex and creating a favourable environment for AYR degradation. Finally, under carbon-limiting conditions, E-MABR significantly promoted AYR decolorization efficiency, mineralization efficiency, and total nitrogen removal by 32.4 ± 2.3 %, 29.4 ± 3.6 %, and 18.4 ± 2.0 %, respectively, compared to MABR.

Lipidomics analysis of microalgal lipid production and heavy metal adsorption under glycine betaine-mediated alleviation of low-temperature stress

Heavy metal pollution in the cold region is serious, affecting human health and aquatic ecology. This study investigated the ability of microalgae to remove heavy metals (HMs) and produce lipid at low temperature. The removal efficiency of different HMs (Cd2+, Cu2+, Cr3+ and Pb2+), cell growth and lipid synthesis of microalgae were analyzed at 15 °C. Moreover, addition of glycine betaine (GB) further enhanced the productivity of microalgae in treating HMs and lipid production, and simultaneously increased the antioxidant capacity of microalgae against environmental stresses. The results showed that the highest lipid productivity of 100.98 mg L-1 d-1 and the removal efficiency of 85.8 % were obtained under GB coupled with Cr3+. The highest glutathione content of 670.34 nmol g-1 fresh alga was achieved under GB coupled with Pb2+. In addition, lipidomics showed that GB was able to up-regulate the triglyceride and diglyceride content, influenced fatty acid composition to regulate the microalgal metabolism, and mediated lipid accumulation under 15 °C mainly through the regulation of glycerol ester metabolism. This study provided a new perspective on microalgal lipid production and the removal of HMs in cold regions and provided evidence for the use of phytohormones to improve the algal environmental resistance.

An overview of recent advances in treatment of complex dye-containing wastewater and its techno-economic assessment

Industries such as textiles, polymers, pharmaceuticals, papers, and tanneries are the key contributors to the global economy. These industries utilize various types of synthetic dyes in their processes, leading to discharge of dyes-contaminated wastewater. The wastewater generally contains various types of dyes (such as methyl orange, congo red, malachite green, etc.), which have a detrimental impact on the ecosystem and human health due to their toxic, carcinogenic, and mutagenic nature. As the result, it is crucial to treat the dyes-contaminated wastewater to protect the environment and render it suitable for reuse, mitigating the escalating global demand for clean water. This review provides a comprehensive overview of dyes and their treatment technologies (i.e., physical, chemical, and biological treatment). Among various treatment methods, the biological treatment is widely employed due to its energy efficiency and eco-friendliness. However, biological treatment faces challenges such as slow processing rates and limited effectiveness in handling low-biodegradability pollutants (BOD5/COD <0.2). This review also highlighted recent advancements in treatment technologies and explored the emerging integrated treatment method that aims to achieve higher removal efficiency for a low biodegradability index dye-contaminated wastewater. Additionally, a techno-economic assessment is presented, analyzing the cost-effectiveness of the emerging technologies in real-world applications. Further, the critical research gaps and future outlooks are also discussed. Overall, the review aims to contribute to the ongoing efforts to improve wastewater treatment processes and promote sustainable water management practices.

Biochar-based composites for removing chlorinated organic pollutants: Applications, mechanisms, and perspectives

Chlorinated organic pollutants constitute a significant category of persistent organic pollutants due to their widespread presence in the environment, which is primarily attributed to the expansion of agricultural and industrial activities. These pollutants are characterized by their persistence, potent toxicity, and capability for long-range dispersion, emphasizing the importance of their eradication to mitigate environmental pollution. While conventional methods for removing chlorinated organic pollutants encompass advanced oxidation, catalytic oxidation, and bioremediation, the utilization of biochar has emerged as a prominent green and efficacious method in recent years. Here we review biochar's role in remediating typical chlorinated organics, including polychlorinated biphenyls (PCBs), triclosan (TCS), trichloroethene (TCE), tetrachloroethylene (PCE), organochlorine pesticides (OCPs), and chlorobenzenes (CBs). We focus on the impact of biochar material properties on the adsorption mechanisms of chlorinated organics. This review highlights the use of biochar as a sustainable and eco-friendly method for removing chlorinated organic pollutants, especially when combined with biological or chemical strategies. Biochar facilitates electron transfer efficiency between microorganisms, promoting the growth of dechlorinating bacteria and mitigating the toxicity of chlorinated organics through adsorption. Furthermore, biochar can activate processes such as advanced oxidation or nano zero-valent iron, generating free radicals to decompose chlorinated organic compounds. We observe a broader application of biochar and bioprocesses for treating chlorinated organic pollutants in soil, reducing environmental impacts. Conversely, for water-based pollutants, integrating biochar with chemical methods proved more effective, leading to superior purification results. This review contributes to the theoretical and practical application of biochar for removing environmental chlorinated organic pollutants.

Frequency-modulated alternating current-driven bioelectrodes for enhanced mineralization of Alizarin Yellow R

The alternating current (AC)-driven bioelectrochemical process, in-situ coupling cathodic reduction and anodic oxidation in a single electrode, offers a promising way for the mineralization of refractory aromatic pollutants (RAPs). Frequency modulation is vital for aligning reduction and oxidation phases in AC-driven bioelectrodes, potentially enhancing their capability to mineralize RAPs. Herein, a frequency-modulated AC-driven bioelectrode was developed to enhance RAP mineralization, exemplified by the degradation of Alizarin Yellow R (AYR). Optimal performance was achieved at a frequency of 1.67 mHz, resulting in the highest efficiency for AYR decolorization and subsequent mineralization of intermediates. Performance declined at both higher (3.33 and 8.30 mHz) and lower (0.83 mHz) frequencies. The bioelectrode exhibited superior electron utilization, bidirectional electron transfer, and redox bifunctionality, effectively aligning reduction and oxidation processes to enhance AYR mineralization. The 1.67 mHz frequency facilitated the assembly of a collaborative microbiome dedicated to AYR bio-mineralization, characterized by an increased abundance of functional consortia proficient in azo dye reduction (e.g., Stenotrophomonas and Shinella), aromatic intermediates oxidation (e.g., Sphingopyxis and Sphingomonas), and electron transfer (e.g., Geobacter and Pseudomonas). This study reveals the role of frequency modulation in AC-driven bioelectrodes for enhanced RAP mineralization, offering a novel and sustainable approach for treating RAP-bearing wastewater.

An eco-friendly chitosan-genipin/SiO2 composite for reactive orange 16 dye removal: Insights into adsorption statistical modeling and mechanism

The present work develops an effective bioadsorbent of cross-linked chitosan-genipin/SiO2 adsorbent (CHI-GNP/SiO2). The developed CHI-GNP/SiO2 was employed for the removal of organic dye (reactive orange 16, RO16) from simulated wastewater. The optimization of the fundamental adsorption variables (CHI-GNP/SiO2 dose, time, and pH) via the Box-Behnken design (BBD) was attained for achieving maximal adsorption capacity and high removal efficiency. The good agreement between the Freundlich isotherms and empirical data of RO16 adsorption by CHI-GNP/SiO2 indicates that the adsorption process follows a multilayer adsorption mechanism. The reasonable agreement between the pseudo-second-order model and the kinetic data of RO16 adsorption by CHI-GNP/SiO2 was obtained. The maximum RO16 adsorption capacity (qmax) of CHI-GNP/SiO2 was identified to be 57.1 mg/g. The adsorption capacity of CHI-GNP/SiO2 is attributed to its unique surface properties, including its highly porous structure and the presence of functional groups such as amino and hydroxyl groups. According to the results of this investigation, CHI-GNP/SiO2 has the potential to be an adsorbent for the removal of acidic dyes from wastewater.

Comparison of treatment performance and microbial community evolution of typical dye wastewater by different combined processes

The degradation of typical dye wastewater is a focus of research in the printing and dyeing industry. In this study, a combined micro-electrolysis and microbial treatment method was established to treat refractory dye wastewater, and the pivotal factors in the microbial treatment were optimized. In the series and coupled modes, the removal rates of chroma reached 98.75% and 92.50%, and the removal rates of chemical oxygen demand (COD) reached 96.17% and 82.29%, respectively. The high-throughput sequencing results showed that the microbial communities in the microbial system varied at different treatment stages. From the culture stage to the domestication stage, the dominant phylum was Proteobacteria; however, the community abundance of microorganisms decreased. A combination of micro-electrolysis and biological methods can alter the characteristics of the microbial community, increase the number of dominant phyla, and increase the abundance of microorganisms. The degradation effect of the series mode and the overall strengthening effect of micro-electrolysis on the microorganisms were better than those of the coupled mode. In actual wastewater, the maximum removal rates of chroma, COD, total nitrogen (TN), ammonia nitrogen (NH3-N), and total phosphorus (TP) are 97.50%, 98.90%, 94.35%, 93.95%, and 91.17%, respectively. Three-dimensional fluorescence spectrum analysis showed that microbial processes could significantly degrade fluorescent components in wastewater, and methanogenic active enzymes in anaerobic processes could continue to react. The combined process can realize the efficient treatment of toxic dye wastewater by reducing the toxicity of wastewater and efficiently degrading organic matter, which has important guiding significance for the treatment of refractory dye wastewater.

Simultaneous production of biofuel, and removal of heavy metals using marine alga Turbinaria turbinata as a feedstock in NEOM Region, Tabuk

Depletion of fossil fuel and pollution by heavy metals are two major global issues. The cell wall of algae consists of polymers of polysaccharides such as cellulose, hemicellulose, alginate, starch, and many others that are readily hydrolyzed to monosaccharides and hence are amenable to fermentation into bioethanol. Moreover, algae contain lipids that may undergo trans-esterification to biodiesel, and can be absorbed by heavy metals. In this study, extraction of lipids from Turbinaria turbinata (common brown alga) from the beach of Sharma, NEOM, Tabuk, Saudi Arabia by different solvents hexane, methanol, and hexane: methanol (1:1), and trans-esterification was performed to obtain biodiesel and investigated by GC.MS. The alga residue after fats extractions by different solvents was used in bioremediation synthetic wastewater containing 50 ppm of As-3, Co+2, Cu+2, Fe+2, Mn+2, and Zn+2. The residue of defatted alga was hydrolyzed by 2% H2SO4 and then fermented to obtain bioethanol. The combination of hexane: methanol (1:1) gave the greatest amount of petroleum hydrocarbons, which contain Tetradecane, 5-methyl, Octacosane, Pentatriacontane, and a small amount of Cyclotrisiloxane, Hexamethyl. The most effective removal % was obtained with alga residue defatted by hexane: methanol (1:1), and methanol, 100% removal of As-3, 83% Co+2, 95% Cu+2, 97.25% Fe+2, Mn+2 79.69%, Zn+2 90.15% with 2 g alga /L at 3 hours. The lowest value of sugar was obtained with hexane: methanol residue but gave the highest bioethanol efficiency. Thus, it is possible to use Turbinaria turbinata, or brown alga as a feedstock to produce bio-diesel, and bioethanol, and to remove heavy metals from wastewater, which may have a great economic and environmental significance.

Biocompounds from wastewater-grown microalgae: a review of emerging cultivation and harvesting technologies

Microalgae biomass has attracted attention as a feedstock to produce biofuels, biofertilizers, and pigments. However, the high production cost associated with cultivation and separation stages is a challenge for the microalgae biotechnology application on a large scale. A promising approach to overcome the technical-economic limitations of microalgae production is using wastewater as a nutrient and water source for cultivation. This strategy reduces cultivation costs and contributes to valorizing sanitation resources. Therefore, this article presents a comprehensive literature review on the status of microalgae biomass cultivation in wastewater, focusing on production strategies and the accumulation of valuable compounds such as lipids, carbohydrates, proteins, fatty acids, and pigments. This review also covers emerging techniques for harvesting microalgae biomass cultivated in wastewater, discussing the advantages and limitations of the process, as well as pointing out the main research opportunities. The novelty of the study lies in providing a detailed analysis of state-of-the-art and potential advances in the cultivation and harvesting of microalgae, with a special focus on the use of wastewater and implementing innovative strategies to enhance productivity and the accumulation of compounds. In this context, the work aims to guide future research concerning emerging technologies in the field, emphasizing the importance of innovative approaches in cultivating and harvesting microalgae for advancing knowledge and practical applications in this area.

Carbide lime as substrates to boost energy recuperation and dyestuff removal in constructed wetland-microbial fuel cell integrated with copper oxide/carbon cloth cathode

Methylene blue (MB) was regarded as a highly toxic and hazardous substance owing to its irreparable hazard and deplorable damage on the ecosystem and the human body. The treatment of this colorant wastewater appeared to be one of the towering challenges in wastewater treatment. In this study, a microbial fuel cell coupled with constructed wetland (CW-MFC) with effective MB elimination and its energy recuperation concurrently based on the incorporation of carbide lime as a substrate in a new copper oxide-loaded on carbon cloth (CuO/CC) cathode system was studied. The crucial influencing parameters were also delved, and the MB degradation and chemical oxygen demand (COD) removal efficiencies were correspondingly incremented by 97.3% and 89.1% with maximum power output up to 74.1 mW m-2 at optimal conditions (0.2 g L-1 carbide lime loading and 500 Ω external resistance). The carbide lime with high calcium ion content was greatly conducive for the enrichment of critical microorganism and metabolic activities. The relative abundances of functional bacteria including Proteobacteria and Actinobacteriota were vividly increased. Moreover, the impressive results obtained in printed ink wastewater treatment with a COD removal efficiency of 81.3% and a maximum power density of 58.2 mW m-2, which showcased the potential application of CW-MFC.

Combined transcriptomic and metabolomic analyses of temperature response of microalgae using waste activated sludge extracts for promising biodiesel production

Waste activated sludge (WAS) as one of the major pollutants with a significant annual production, has garnered significant attention regarding its treatment and utilization. If improperly discharged, it not only caused environmental pollution but also led to the wastage of valuable resources. In this study, the microalgae growth and lipid accumulation using waste activated sludge extracts (WASE) under different temperature conditions were investigated. The highest lipid content (59.13%) and lipid productivity (80.41 mg L-1 d-1) were obtained at cultivation temperatures of 10 and 25 °C, respectively. It was found that microalgae can effectively utilize TN/TP/NH4+-N and other nutrients of WASE. The highest utilization rates of TP, TN and NH4+-N were achieved at a cultivation temperature of 10 °C, reaching 84.97, 77.49 and 92.32%, respectively. The algal fatty acids had carbon chains predominantly ranging from C14 to C18, making them suitable for biodiesel production. Additionally, a comprehensive analysis of transcriptomics and metabolomics revealed up-regulation of genes associated with triglyceride assembly, the antioxidant system of algal cells, and cellular autophagy, as well as the accumulation of metabolites related to the tricarboxylic acid (TCA) cycle and lipids. This study offers novel insights into the microscopic mechanisms of microalgae culture using WASE and approaches for the resource utilization of sludge.

Two-stage sequencing batch reactors with added iron shavings for nutrient removal and aerobic sludge granulation treating real wastewater with low carbon to nitrogen ratios

In response to the challenges of limited nutrient removal and the difficulty in forming aerobic granular sludge (AGS) with low carbon to nitrogen (C/N) ratios, a novel two-stage sequencing batch reactors (SBRs) (R1 and R2) system with added iron shavings was proposed and established. The results showed that AGS was developed and nitrogen (82.8 %) and phosphorus (94.7 %) were effectively removed under a C/N ratio at 1.7 ± 0.5. The average size of R1 and R2 increased from 45.3 μm to 138.7 μm and 132.8 μm. Under high biological selective pressure, phosphorus accumulating organisms like Comamonadaceae (14.8 %) and Chitinophagales (5.7 %) experienced enrichment in R1. Furthermore, R2 exhibited an increased abundance of nitrifying bacteria (2.3 %) and a higher proportion of nitrogen removal through autotrophic denitrification (＞17.5 %). Overall, this study introduces an innovative two-stage SBRs with added iron shavings, offering a novel approach for the treatment of low C/N ratios wastewater.

New insights into rare earth element-induced microalgae lipid accumulation: Implication for biodiesel production and adsorption mechanism

A coupling technology for lipid production and adsorption of rare earth elements (REEs) using microalgae was studied in this work. The microalgae cell growth, lipid production, biochemical parameters and lipid profiles were investigated under different REEs (Ce3+, Gd3+and La3+). The results showed that the maximum lipid production was achieved at different concentrations of REEs, with lipid productivities of 300.44, 386.84 and 292.19 mg L-1 d-1 under treatment conditions of 100 μg L-1 Ce3+, 250 μg L-1 Gd3+ and 1 mg L-1 La3+, respectively. Moreover, the adsorption efficiency of Ce3+, Gd3+ and La3+exceeded 96.58 %, 93.06 % and 91.3 % at concentrations of 25-1000 μg L-1, 100-500 μg L-1 and 0.25-1 mg L-1, respectively. In addition, algal cells were able to adsorb 66.2 % of 100 μg L-1 Ce3+, 48.4 % of 250 μg L-1 Gd3+ and 59.9 % of 1 mg L-1 La3+. The combination of extracellular polysaccharide and algal cell wall could adsorb 25.2 % of 100 μg L-1 Ce3+, 44.5 % of 250 μg L-1 Gd3+ and 30.5 % of 1 mg L-1 La3+, respectively. These findings indicated that microalgae predominantly adsorbed REEs through the intracellular pathway. This study elucidates the mechanism of effective lipid accumulation and adsorption of REEs by microalgae under REEs stress conditions. It establishes a theoretical foundation for the efficient microalgae lipid production and REEs recovery from wastewater or waste residues containing REEs.

Remediation of multifarious metal ions and molecular docking assessment for pathogenic microbe disinfection in aqueous solution by waste-derived Ca-MOF

The present study demonstrates an eco-friendly and cost-effective synthesis of calcium terephthalate metal-organic frameworks (Ca-MOF). The Ca-MOF were composed of metal ions (Ca2+) and organic ligands (terephthalic acid; TPA); the former was obtained from egg shells, and the latter was obtained from processing waste plastic bottles. Detailed characterization using standard techniques confirmed the synthesis of Ca-MOF with an average particle size of 461.9 ± 15 nm. The synthesized Ca-MOF was screened for its ability to remove multiple metal ions from an aqueous solution. Based on the maximum sorption capacity, Pb2+, Cd2+, and Cu2+ ions were selected for individual parametric batch studies. The obtained results were interpreted using standard isotherms and kinetic models. The maximum sorption capacity (qm) obtained from the Langmuir model was found to be 644.07 ± 47, 391.4 ± 26, and 260.5 ± 14 mg g-1 for Pb2+, Cd2+, and Cu2+, respectively. Moreover, Ca-MOF also showed an excellent ability to remove all three metal ions simultaneously from a mixed solution. The metal nodes and bonded TPA from Ca-MOF were dissociated by the acid dissolution method, which protonated and isolated TPA for reuse. Further, the crystal structure of Ca-MOF was prepared and docked with protein targets of selected pathogenic water-borne microbes, which showed its disinfection potential. Overall, multiple metal sorption capability, regeneration studies, and broad-spectrum antimicrobial activity confirmed the versatility of synthesized Ca-MOF for industrial wastewater treatment.

Simultaneous denitrification enhancement and sludge reduction based on novel suspended carrier modified using activated carbon and magnetite at low carbon/nitrogen ratio

A novel suspended carrier was prepared by sticking activated carbon (AC) and magnetite (Fe3O4) onto polypropylene slices. Although this carrier could not reverse the decreased denitrification capacity trends under anoxic conditions at an influent carbon/nitrogen (C/N) ratio of 2, it enhanced denitrification by stimulating sludge reduction and accelerating electron transfer to certain extent. The carrier stuck by mixed AC/Fe3O4 exhibited better performance in terms of sludge reduction, extracellular polymeric substances (EPS) secretion, and denitrification than that merely stuck by AC and Fe3O4 at an influent C/N ratio of 2. The carrier stuck by mixed AC/Fe3O4 increased the total nitrogen removal efficiency by 24.6 % ± 12.5 % in a 72-h denitrification batch experiment compared to the common polypropylene carrier. Moreover, the carrier improved EPS secretion and nitrogen metabolism and promoted the growth of Trichococcus and some denitrifying genera. This study provides a reference for the treatment of low C/N ratio sewage.

Sustainable management and valorization of biomass wastes using synthetic microbial consortia

In response to the persistent expansion of global resource demands, considerable attention has been directed toward the synthetic microbial consortia (SMC) within the domain of microbial engineering, aiming to address the sustainable management and valorization of biomass wastes. This comprehensive review systematically encapsulates the most recent advancements in research and technological applications concerning the utilization of SMC for biomass waste treatment. The construction strategies of SMC are briefly outlined, and the diverse applications of SMC in biomass wastes treatment are explored, with particular emphasis on its potential advantages in waste degradation, hazardous substances control, and high value-added products conversion. Finally, recommendations for the future development of SMC technology are proposed, and prospects for its sustainable application are discussed.

Highly efficient removal of tetracyclines from water by a superelastic MOF-based aerogel: Mechanism quantitative analysis and dynamic adsorption

Metal-organic frameworks (MOFs) were promising adsorbents for removing antibiotics, but the inherent poor recyclability of MOF powders limits further application. Moreover, the dominant adsorption mechanisms and their quantitative assessment are less studied. Here, ultrahigh adsorption capacities of 821.51 and 931.87 mg g-1 for tetracycline (TC) and oxytetracycline (OTC), respectively, were realised by a novel adsorbents (biochar loaded with MIL-88B(Fe), denoted as BC@MIL-88B(Fe)), which were further immobilised in a 3D porous gelatin (GA) substrate. The obtained BCM/GA200 showed superior adsorption performance under wide pH ranges and under the interference of humic acid. Moreover, it can survive >8 cycles and even maintain high adsorption efficiency in different actual water samples. Notably, BCM/GA200 can selectively remove tetracyclines in a multivariate system containing other kinds of antibiotics and from a dynamic adsorption system. Most importantly, the results of X-ray photoelectron spectroscopy, 2D Fourier transform infrared correlation spectroscopy (2D-FTIR-COS) and density functional theory techniques revealed that (1) for TC adsorption, at pH < 4.0, the contribution of complexation was 25 %-45 %, whereas pore filling and hydrogen bonding accounted for 39 %-72 % of the total uptake. At 4.0 < pH < 10.0, the contribution of complexation increased to 60 %-82 %, whereas electrostatic attraction and π-π interaction were 4 %-13 % and 2 %-10 %, respectively. (2) For OTC adsorption, complexation was dominant at 3.0 < pH < 10.0, accounting for 55 %-86 % of the total uptake, and electrostatic attraction and π-π interactions caused 3 %-10 % and 3 %-15 %, respectively. (3) At pH > 10.0, pore filling dominated TC and OTC adsorption. Finally, the reaction sequences of the main adsorption mechanisms were also probed by 2D-FTIR-COS. This work solves the poor recyclability of MOF powders and provides a mechanistic insight into antibiotic removal by MOFs.

Insights into biofilm development on polyhydroxyalkanoate biofilm carrier for anoxic azo dye decolourization of acid orange 7

Polyhydroxyalkanoates (PHAs) are promising alternatives to non-degradable polymers in various applications. This study explored the use of biologically recovered PHA as a biofilm carrier in a moving bed biofilm reactor for acid orange 7 treatment. The PHA was comprised of 86 ± 1 mol% of 3-hydroxybutyrate and 14 ± 1 mol% of 3-hydroxyhexanoate and was melt-fused at 140 °C into pellets. The net positive surface charge of the PHA biocarrier facilitated attachment of negatively charged activated sludge, promoting biofilm formation. A 236-µm mature biofilm developed after 26 days. The high polysaccharides-to-protein ratio (>1) in the biofilm's extracellular polymeric substances indicated a stable biofilm structure. Four main microbial strains in the biofilm were identified as Leclercia adecarboxylata, Leuconostoc citreum, Bacillus cereus, and Rhodotorula mucilaginosa, all of which exhibited decolourization abilities. In conclusion, PHA holds promise as an effective biocarrier for biofilm development, offering a sustainable alternative in wastewater treatment applications.

Thallium-mediated NO signaling induced lipid accumulation in microalgae and its role in heavy metal bioremediation

Thallium (Tl⁺) is a trace metal with extreme toxicity and is highly soluble in water, posing a great risk to ecological and human safety. This work aimed to investigate the role played by Tl⁺ in regulating lipid accumulation in microalgae and the removal efficiency of Tl⁺. The effect of Tl⁺ on the cell growth, lipid production and Tl⁺ removal efficiency of Parachlorella kessleri R-3 was studied. Low concentrations of Tl⁺ had no significant effect on the biomass of microalgae. When the Tl⁺ concentration exceeded 5 μg L^-1, the biomass of microalgae showed significant decrease. The highest lipid content of 63.65% and lipid productivity of 334.55 mg L^-1 d^-1 were obtained in microalgae treated with 10 and 5 μg L^-1 Tl⁺, respectively. Microalgae can efficiently remove Tl⁺ and the Tl⁺ removal efficiency can reach 100% at Tl⁺ concentrations of 0-25 μg L^-1. The maximum nitric oxide (NO) level of 470.48 fluorescence intensity (1 × 10⁶ cells)^-1 and glutathione (GSH) content of 343.51 nmol g^-1 (fresh alga) were obtained under 5 μg L^-1 Tl⁺ stress conditions. Furthermore, the exogenous donor sodium nitroprusside (SNP) supplemented with NO was induced in microalgae to obtain a high lipid content (59.99%), lipid productivity (397.99 mg L^-1 d^-1) and GSH content (430.22 nmol g^-1 (fresh alga)). The corresponding analysis results indicated that NO could participate in the signal transduction pathway through modulation of reactive oxygen species (ROS) signaling to activate the antioxidant system by increasing the GSH content to eliminate oxidative damage induced by Tl⁺ stress. In addition, NO regulation of ROS signaling may enhance transcription factors associated with lipid synthesis, which stimulates the expression of genes related to lipid synthesis, leading to increased lipid biosynthesis in microalgae. Moreover, it was found that the change in Tl⁺ had little effect on the fatty acid components and biodiesel properties. This study showed that Tl⁺ stress can promote lipid accumulation in microalgae for biodiesel production and simultaneously effectively remove Tl⁺, which provided evidence that NO was involved in signal transduction and antioxidant defense, and improved the understanding of the interrelation between NO and ROS to regulate lipid accumulation in microalgae.

Self-forming electroactive dynamic membrane for enhancing the decolorization of methyl orange by weak electrical stimulation

An electroactive dynamic membrane (EADM), which enabled simultaneous solid-liquid separation and contaminants removal, has been developed by electrostimulation using domestic wastewater as inoculum. Results showed that both the control dynamic membrane (CDM), without electrical stimulation, and the EADM systems exhibited stable removal performance with chemical oxygen demand (COD), and a robustness in responding to a fluctuating organic load. With the introduction of a weak electrical field, the EADM transmembrane pressure (TMP) was significantly reduced (0.02 kPa/d) compared with the control (0.20 kPa/d). In the treatment of methyl orange (MO), the EADM system achieved a decolorization efficiency of 85.87 %, much higher than the control dynamic membrane (CDM) system (58.84 %), which can be attributed to electrical stimulation and H₂ production on cathode. Microbial analysis has established that electrostimulation enriched the electroactive bacteria in the dynamic biofilm, and shaped the microbial structure, with improved contaminant removal. The results of this study highlight the potential of regulating the microbial community and creating a beneficial biofilm as a dynamic layer to facilitate contaminant removal.

Lipid production characteristics of a newly isolated microalga Asterarcys quadricellulare R-56 as biodiesel feedstock

In this study, a new microalgal strain, Asterarcys quadricellulare R-56, was isolated for biomass and lipid production. The effects of carbon and nitrogen sources and initial pH on the cell growth and lipid accumulation of strain R-56 were investigated. At 10 g L^-1 glucose, 0.6 g L^-1 sodium nitrate, and pH 7, the highest biomass of 4.18 g L^-1 and lipid content of 43.66% were obtained. Microalgae had a broad pH tolerance in the range of 5-11, and the pH of the culture medium was close to neutral at the end of cultivation. The maximum contents of chlorophyll, carbohydrate, and protein under the recommended culture conditions were 19.47 mg mL^-1, 21.80%, and 29.94%, respectively. Palmitic and palmitoleic acid contents in strain R-56 accounted for as high as 83.73% of total fatty acids. This study suggested that strain R-56 was a promising lipid producer for high-quality biodiesel production.

Simultaneous chromium removal and lipid accumulation by microalgae under acidic and low temperature conditions for promising biodiesel production

Microalgae have become the hotspot of recent researches as heavy metals (HMs) adsorbent and biodiesel production feedstock. In this study, the cell growth, lipid production and Cr⁶⁺ removal of Parachlorella kessleri R-3 at pH 3.5 and 15 °C were investigated. It was found that low concentration of Cr⁶⁺ (0.5 to 2 mg/L) promoted the algal growth, whereas Cr⁶⁺ higher than 5 mg/L inhibited the growth of P. kessleri R-3. Biomass concentration (2.40 g/L) and lipid productivity (131.79 mg/L d^-1) reached the highest at 2 mg/L Cr⁶⁺, and lipid content (61.03 %) reached the highest at 5 mg/L Cr⁶⁺. The maximum Cr⁶⁺ removal efficiency of 91 % was obtained at 0.5 mg/L Cr⁶⁺ treatment. Furthermore, fatty acid composition analysis showed that strain R-3 had a high C16-18 content of 74.88-89.21 %. This study provides new insight into the treatment of HMs and lipid production in cold regions.

A feasibility investigation of a pilot-scale bioelectrochemical coupled anaerobic digestion system with centric electrode module for real membrane manufacturing wastewater treatment

The large-scale application of bioelectrochemical coupled anaerobic digestion (BES-AD) is limited by the matching of electrode configuration and the applicability of real wastewater. In this study, a pilot-scale BES-AD system with an effective system volume of 5 m³ and a 1 m³ volume of a carbon fiber brush electrode module was constructed and tested for treatment of the membrane manufacturing wastewater. The results showed that the BOD₅/COD of the wastewater was increased from 0.238 to 0.398 when the applied voltage was 0.9 V. The pollutants such as N, N-Dimethylacetamide and glycerol in wastewater were degraded significantly. The microorganisms in the electrode modules were spatially enriched. The fermenters (Norank_f__ML635J-40_aquatic_group, 6.55 %; unclassified_f__Propionibacteriaceae, 5.25 %) and degraders (Corynebacterium, 29.31 %) were mostly enriched at the bottom, while electroactive bacteria (Pseudomonas, 29.39 %, Geobacter, 7.86 %) were mostly enriched at the top. Combined with the economical construction and operation cost ($1708.8/m³ and $0.76/m³) of the BES-AD system.