Activation of calcium peroxide by nitrogen and sulfur co-doped metal-free lignin biochar for enhancing the removal of emerging organic contaminants from waste activated sludge

Preparation and performance of catalyst for organic peroxide wastewater treatment

To improve the oxidation pretreatment efficiency of wastewater from organic peroxides, a catalyst (CeO2-C catalyst) was developed using the calcination method with ceramic particles as the support. The crystalline structure and elemental composition of the CeO2-C catalyst were characterized by Scanning Electron Microscope (SEM), Energy Dispersive Spectrometer (EDS), and X-ray diffraction (XRD). This study explored the effects of CeO2 mass ratio, calcination temperature, and calcination time on the performance of the catalyst. The optimal preparation conditions were established through orthogonal experiments. Additionally, the synergistic effect of the catalyst on the ozone oxidation treatment of peroxide wastewater was investigated. The results indicated that the optimal preparation parameters were a CeO2 mass ratio of 4 %, a calcination temperature of 500 °C, and a duration of 5 h, respectively. After five cycles of reuse, the catalytic activity slightly decreased but remained relatively stable. With an ozone flow rate of 6 L/min, the CeO2-C/ozone catalytic oxidation process achieved a Chemical Oxygen Demand (COD) removal rate of 28.11 % in wastewater, and the B/C (the ratio of BOD concentration to COD concentration) of wastewater improved from 0.093 to 0.152. The calcination method proved effective for preparing the CeO2-C catalyst, which demonstrated significant catalytic performance and held promising application prospects in the oxidation pretreatment of organic peroxide wastewater.

Innovative strategy for the effective utilization of coal waste slag in the Fenton-like process for the degradation of trichloroethylene

In response to environmental concerns at the global level, there is considerable momentum in the exploration of materials derived from waste that are both sustainable and eco-friendly. In this study, CS-Fe (carbon, silica, and iron) composite was synthesized from coal gasification slag (CGS) and innovatively applied as a catalyst to activate PS (persulfate) for the degradation of trichloroethylene (TCE) in water. Scanning electron microscope (SEM), fourier transmission infrared spectroscopy (FTIR), energy dispersive x-ray spectroscopy (EDS), brunauer, emmet, and teller (BET) technique, and x-ray diffractometer (XRD) spectra were employed to investigate the surface morphology and physicochemical composition of the CS-Fe composite. CS-Fe catalyst showed a dual nature by adsorption and degradation of TCE simultaneously, displaying 86.1% TCE removal in 3 h. The synthesized CS-Fe had better adsorption (62.1%) than base material CGS (36.4%) due to a larger BET surface area (770.8 m2 g-1), while 24.0% TCE degradation was recorded upon the activation of PS by CS-Fe. FTIR spectra confirmed the adsorption and degradation of TCE by investigating the used and fresh samples of CS-Fe catalyst. Scavengers and Electron paramagnetic resonance (EPR) analysis confirmed the availability of surface radicals and free radicals facilitated the degradation process. The acidic nature of the solution favored the degradation while the presence of bicarbonate ion (HCO3-) hindered this process. In conclusion, these results for real groundwater, surfactant-added solution, and degradation of other TCE-like pollutants propose that the CS-Fe composite offers an economically viable and favorable catalyst in the remediation of organic contaminants within aqueous solutions. Further investigation into the catalytic potential of coal gasification slag-based carbon materials and their application in Fenton reactions is warranted to effectively address a range of environmental challenges.

Biochar-based functional materials for the abatement of emerging pollutants from aquatic matrices

Biochar has emerged as a versatile and efficient multi-functional material, serving as both an adsorbent and catalyst in removing emerging pollutants (EPs) from aquatic matrices. However, pristine biochar's catalytic and adsorption capabilities are hindered by its poor surface functionality and small pore size. Addressing these limitations involves the development of functionalized biochar, a strategic approach aimed at enhancing its physicochemical properties and improving adsorption and catalytic efficiencies. Despite a growing interest in this field, there is a notable gap in existing literature, with no review explicitly concentrating on the efficacy of biochar-based functional materials (BCFMs) for removing EPs in aquatic environments. This comprehensive review aims to fill this void by delving into the engineering considerations essential for designing BCFMs with enhanced physiochemical properties. The focus extends to understanding the treatment efficiency of EPs through mechanisms such as adsorption or catalytic degradation. The review systematically outlines the underlying mechanisms involved in the adsorption and catalytic degradation of EPs by BCFMs. By shedding light on the prospects of BCFMs as a promising multi-functional material, the review underscores the imperative for sustained research efforts. It emphasizes the need for continued exploration into the practical implications of BCFMs, especially under environmentally relevant pollutant concentrations. This holistic approach seeks to contribute to advancing knowledge and applying biochar-based solutions in addressing the challenges posed by emerging pollutants in aquatic ecosystems.

Application of calcium peroxide in promoting resource recovery from municipal sludge: A review

The harmless disposal, resource recovery, and synergistic efficiency reduction of municipal sludge have been the research focuses for the last few years. Calcium peroxide (CaO2) is a multifunctional and safe peroxide that produces an alkaline oxidation environment to promote the fermentation of municipal sludge to produce hydrogen (H2) and volatile fatty acids (VFAs), thus realizing sludge resource recovery. This review outlines the research achievements of CaO2 in sludge resource recovery, improvement of sludge dewaterability, and removal of pollutants from sludge in recent years. Meanwhile, the mechanism of CaO2 and its influencing factors have also been comprehensively summarized. Finally, the future development direction of the application of CaO2 in municipal sludge is prospected. This review would provide theoretical reference for the potential engineering applications of CaO2 in improving sludge treatment in the future.

Formation mechanisms and degradation methods of polycyclic aromatic hydrocarbons in biochar: A review

Biochar has been widely used in soil amendment and environmental remediation. Polycyclic aromatic hydrocarbons (PAHs) could be produced in preparation of biochar, which may pose potential risks to the environment and human health. At present, most studies focus on the ecotoxicity potential of biochar, while there are few systematic reviews on the formation mechanisms and mitigation strategies of PAHs in biochar. Therefore, a systematical understanding of the distribution, formation mechanisms, risk assessment, and degradation approaches of PAHs in biochar is highly needed. In this paper, the distribution and content of the total and bioavailable PAHs in biochar are reviewed. Then the formation mechanisms, influencing factors, and potential risk assessment of PAHs in biochar are systematically explored. After that, the effective strategies to alleviate PAHs in biochar are summarized. Finally, suggestions and perspectives for future studies are proposed. This review provides a guide for reducing the formation of biochar-associated PAHs and their toxicity, which is beneficial for the development and large-scale safe use of environmentally friendly biochar.

Facile heteroatoms modification biochar production from mahogany (Swietenia macrophylla King) pericarps for enhanced the suppression of polycyclic aromatic hydrocarbon pollutants

Polycyclic aromatic hydrocarbons (PAHs) are critical environmental concerns due to their intrinsic toxic aromatic nature and concomitant circumstances that potentially harm the ecological and human health. In this study, converting mahogany (Swietenia macrophylla King) pericarps to value-added biochar by pyrolysis for evaluating the potential formation/destruction of biochar-bound PAHs was studied for the first time. This study designed and optimized the thermal processing conditions at 300-900 °C in the CO2 or N2 atmosphere, and heteroatoms (N, O, B, NB, and NS) were modified for mahogany pericarps biochar (MPBC) production. The MPBC500 exhibited significantly higher pyrolysis products of PAHs (2780 ± 38 ng g-1) than that of MPBC900 (78 ± 6 ng g-1) under N2 without introducing modified elements. Specifically, the inhibition capacity of MPBC500 for PAHs under CO2 was improved most efficiently by the active nitrogen species of the pyridinic N and pyrrolic N groups. The pyrolysis conditions and heteroatom modification of MPBC altered its physicochemical properties, that is, aromaticity and hydrophobicity, affecting the PAH concentration and composition in the pyrolysis products. This study reveals sustainable approaches to reduce the environmental footprint of biochar by focusing on increases in PAHs pollution in sustainable biochar produced from a low-carbon bioeconomy perspective.

Metal-free nitrogen and sulfur binary-doped cellulose-based biochar for efficient suppression of priority organic pollutants and environmental application

Biochar production from cellulose biomass is an alternative solution in the search for clean and renewable biofuel. However, the rational design of cellulose biochar (CLBC) for polycyclic aromatic hydrocarbons (PAHs) reduction by integrating pyrolysis process parameters and introducing heteroatoms as inhibitors remains to be studied. Therefore, exogenous heteroatoms (N, B, S, SB, NB, and NS) were used to modify CLBC for the first time. CLBC300 pyrolyzed at 300 °C in a CO2 atmosphere achieved the highest concentrations of PAHs (4982 ± 271 ng g-1), compared with that of CLBC700 (3615 ± 71 ng g-1) formed in a N2 atmosphere without heteroatom doping. The results showed that binary nitrogen- and sulfur-doped CLBC exhibited remarkable PAH-removal performance of 99 % with the lowest toxic equivalency (TEQ) value of 9 ng g-1. Overall, this study presents novel insights into the development of a heteroatom-based modification approach for reducing CLBC-borne PAHs and creating value-added products from cellulose biomass.

The remediation of marine sediments containing polycyclic aromatic hydrocarbons by peroxymonosulfate activated with Sphagnum moss-derived biochar and its benthic microbial ecology

This research was to study the efficiency of Sphagnum moss-derived biochar (SMBC) in removing polycyclic aromatic hydrocarbons (PAHs) from marine sediment using a peroxymonosulfate (PMS)-based carbon-advanced oxidation process (PMS-CAOPs). Sphagnum moss-derived biochar (SMBC) was generated via a simple thermochemical process for PMS activation toward enhancing decontamination of sediments. At pH 6, the SMBC/PMS system achieved a PAH removal efficiency exceeding 78% in 12 h reaction time. Moreover, PAHs of 6-, 5-, 4-, 3-, and 2-ring structures exhibited 98%, 74%, 68%, 85%, and 91%, of removal, respectively. The SMBC activation of PMS generated both radicals (SO4•- and HO•) and nonradical (1O2), species responsible for PAHs degradation, attributed primarily to inherent iron and carbon moieties. The significant PAHs degradation efficiency showcased by the SMBC/PMS process holds promise for augmenting the performance of indigenous benthic microbial activity in sediment treatment contexts. The response of sediment microbial communities to PAH-induced stress was particularly associated with the Proteobacteria phylum, specifically the Sulfurovum genus. The findings of the present study highlight the efficacy of environmentally benign reactive radical/nonradical-based PMS-CAOP using pristine carbon materials, offering a sustainable strategy for sediment treatment.

Pretreatment of marine sediment for the removal of di-(2-ethylhexyl) phthalate by sulfite in the presence of sorghum distillery residue-derived biochar and its effect on microbiota response

This study investigates the mechanism behind the oxidation di-(2-ethylhexyl) phthalate (DEHP) in marine sediment by coupling sulfite using biochar prepared from sorghum distillery residue (SDRBC). The rationale for this investigation stems from the need to seek effective methods for DEHP-laden marine sediment remediation. The aim is to assess the feasibility of sulfite-based advanced oxidation processes for treating hazardous materials such as DEHP containing sediment. To this end, the sediment in question was treated with 2.5 × 10-5 M of sulfite and 1.7 g L-1 of SDRBC700 at acidic pH. Additionally, the study demonstrated that the combination of SDRBC/sulfite with a bacterial system enhances DEHP removal. Thermostilla bacteria were enriched, highlighting their role in sediment treatment. This study concludes that sulfite-associated sulfate radicals-driven carbon advanced oxidation process (SR-CAOP) offers sustainable sediment pretreatment through the SDRBC/sulfite-mediated microbial consortium, in which the SO3•- and 1O2 were responsible for DEHP degradation. SDRBC/sulfite offers an effective and environmentally friendly method for removing DEHP. Further, these results can be targeted at addressing industry problems related to sediment treatment.

Using waste to treat waste: facile synthesis of hollow carbon nanospheres from lignin for water decontamination

Lignin, the most abundant natural material, is considered as a low-value commercial biomass waste from paper mills and wineries. In an effort to turn biomass waste into a highly valuable material, herein, a new-type of hollow carbon nanospheres (HCNs) is designed and synthesized by pyrolysis of biomass dealkali lignin, as an efficient nanocatalyst for the elimination of antibiotics in complex water matrices. Detailed characterization shows that HCNs possess a hollow nanosphere structure, with abundant graphitic C/N and surface N and O-containing functional groups favorable for peroxydisulfate (PDS) activation. Among them, HCN-500 provides the maximum degradation rate (95.0%) and mineralization efficiency (74.4%) surpassing those of most metal-based advanced oxidation processes (AOPs) in the elimination of oxytetracycline (OTC). Density functional theory (DFT) calculations and high-resolution mass spectroscopy (HR-MS) were employed to reveal the possible degradation pathway of OTC elimination. In addition, the HCN-500/PDS system is also successfully applied to real antibiotics removal in complex water matrices (e.g. river water and tap water), with excellent catalytic performances.

Pyrolysis processes affecting polycyclic aromatic hydrocarbon profile of pineapple leaf biochar exemplified by atmosphere/temperature and heteroatom doping

The content of polycyclic aromatic hydrocarbons in pineapple leaf biochar was examined as a function of pyrolysis atmosphere (CO₂ or N₂), pyrolysis temperature (300-900 °C), and heteroatom (N, B, O, P, NP, or NS) doping. Without doping, the polycyclic aromatic hydrocarbon production was maximal (1332 ± 27 ng/g) in CO₂ at 300 °C and minimal (157 ± 2 ng/g) in N₂ at 700 °C. The main components naphthalene and acenaphthylene accounted for about 91% of the total polycyclic aromatic hydrocarbon in the biochar prepared under CO₂ at 300 °C. Under the maximal polycyclic aromatic hydrocarbon production conditions (CO₂, 300 °C), doping decreased the total hydrocarbon content by 49% (N), 61% (B), 73% (O), 92% (P), 93% (NB), and 96% (NS). The results shed new light on the management of polycyclic aromatic hydrocarbons in BC production by controlling the pyrolysis atmosphere and temperature in addition to heteroatom doping. Results significantly contributed to the development of circular bioeconomy.

Effects of pyrolysis conditions and heteroatom modification on the polycyclic aromatic hydrocarbons profile of biochar prepared from sorghum distillery residues

The formation of 2- to 6-ring polycyclic aromatic hydrocarbons (PAHs) in sorghum distillery residue-derived biochar (SDRBC) was evaluated under different thermochemical pyrolysis conditions of carbonization atmosphere (N2 or CO2), temperature (300-900 °C) and doping with nonmetallic elements, i.e., N, B, O, P, N + B, and N + S. The results indicated that without surface modification, PAHs formation was 944 ± 74 ng g-1, the highest level, and 181 ± 16 ng g-1, the lowest level, at 300 °C in N2 and CO2 atmosphere, respectively. Boron doping of SDRBC significantly reduced the PAHs content (by 97%) under N2 at 300 °C. Results demonstrated that boron modified SDRBC exhibited the highest degree of PAH reduction. Combined pyrolysis temperature and atmosphere in addition to heteroatom doping is a robust and viable strategy for efficient suppression of PAHs formation and high-value utilization of pyrolysis products of low carbon footprint.