Biochar loaded with CoFe2O4 enhances the formation of high-valent Fe(IV) and Co(IV) and oxygen vacancy in the peracetic acid activation system for enhanced antibiotic degradation

Fluoride ions enhanced cobalt ferrite for peroxymonosulfate activation with efficient performance and active oxygen yield regulation

The activation of peroxymonosulfate (PMS) by cobalt-based catalysts for the degradation of organic pollutants has been widely studied, while the role of coexisting anions has received little attention. In this study, the performance of atrazine (ATZ) degradation by the addition of fluoride ions (F-) in the activation of PMS by cobalt ferrite (CoFe2O4) was investigated. The addition of F- to the CoFe2O4/PMS system increased ATZ degradation effect from 82 % to 98 % within 10 min, and the rate increased from 0.172 min-1 to 0.431 min-1. At the same time, F- could also enhance the degradation of organic substances such as sulfamethoxazole (SMX), ibuprofen, and iohexol. Based on generating SO4•-, HO• and Co(IV)=O in the CoFe2O4/PMS system, F- enhanced the generation of SO4•-. When coexisting with common substances in water (i.e., inorganic anions, humic acid, hemoglobin and dextran), F- can still increase the reaction rate and reduce their negative impacts. Ion dissolution and control tests verified Co as a valid active site. A potential reaction mechanism was proposed for the complex Co(II)F formation with Co by F-, which enhanced the activation of the PMS by CoFe2O4 and regulated the active species. Finally, it was verified that the low concentration of F- could enhance ATZ degradation within two hours and the remaining F- could be effectively removed by flocculation and precipitation. This research takes utilization of F- in wastewater to promote advanced oxidation processes based on PMS, which provides a new direction for the treatment of actual water pollution.

A Critical Review on the Biochar-mediated Formation of Reactive Species: Detection Methods, Transformation Mechanisms and Environmental Implications

In recent years, studies on the degradation of environmental contaminants by sulfate radicals (SO4•-) and hydroxyl radicals (•OH) based advanced oxidation processes (AOPs) have garnered increasing attention. Notably, biochar, which can activate chemical oxidants to produce reactive species, has been increasingly employed to enhance the removal of the contaminants in AOPs. Nevertheless, a systematic understanding of the biochar-mediated reactive species is still lacking in contaminants remediation during environmental applications. This review outlines the identification and determination methods of reactive species induced by biochar, the underlying reaction mechanisms, and their contaminant removal efficacy in AOPs systems. Multiple factors, such as the characteristics of biochar/chemical oxidants, the nature of the target contaminants, and some soil active constituents can affect the generation, diffusion, and transformation of a wide range of reactive species. This review systematically compares two reaction pathways, free radical mechanisms and non-free radical mechanisms. Environmental applications are emerging from the controlled generation of reactive species through biochar-mediated processes, as comprehensively discussed.

Mechanistic insights into activation of peracetic acid by sludge biogas residue biochar for efficient sulfamethoxazole degradation in aqueous solution

The application of peracetic acid (PAA) in the advanced oxidation process has been demonstrated to be an effective approach for treating aqueous organic pollutants. In this study, it is the first time that biogas residue biochar (BRBC) derived from sludge anaerobic digestion plants was prepared and used as a PAA activator for sulfamethoxazole (SMX) degradation. The optimal SMX removal could achieve 92 % within 120 min under acidic conditions. The SMX degradation was slightly enhanced in the presence of Cl-, while it could be inhibited by HCO3-. Quenching experiment and EPR analysis demonstrated that both radical and non-radical processes contributed to SMX degradation. ECOSAR analysis showed a significant reduction in intermediate toxicity. Meanwhile, BRBC700 exhibited excellent reusability and stability even in real water matrices. The study presented an innovative approach for biogas residue application and provided a novel pretreatment for SMX-containing wastewater for further biological treatment method after simple acid-base regulation.

Oxygen vacancies-enriched spent lithium-ion battery cathode materials loaded catalytic membrane for effective peracetic acid activation and organic pollutants degradation

Advanced oxidation processes combined with membrane filtration technique offer a promising approach for pollution mitigation and catalyst recovery. Herein, a waste ternary lithium-ion battery cathode material of LiNixCoyMnzO2 (LNCM) loaded polytetrafluoroethylene (PTFE) membrane was synthesized for peracetic acid (PAA) activation (LNCM-PTFE/PAA) and 2,4,6-trichlorophenol (TCP) degradation. Such a novel membrane, with a catalyst loading of 10 mg (0.796 mg/cm2) of LNCM achieved 96.4 % removal of TCP (2 mg/L) within 20 min in neutral pH. The redox cycles of surface metals (such as Co3+/Co2+, Ni3+/Ni2+, and Mn4+/Mn3+/Mn2+) in spent LNCM efficiently enhance charge transfer and mediated PAA activation. And intrinsic oxygen vacancies in LNCM facilitated PAA adsorption and its cleavage. The resulting carbon-centered radicals (R-C•, CH3C(O)OO•) and 1O2 are identified as the primary reactive species that collaboratively participate in TCP degradation. Quantitative structure-activity relationship analysis demonstrated a substantial reduction in product toxicity. The successful practical application of the LNCM-PTFE/PAA membrane was exemplified by treating chlorophenol industrial wastewater. This study presents a new LNCM-PTFE/PAA catalytic membrane for high-efficiency water treatment and a novel perspective for green utilization of waste LNCM.

Application of Biochar-Based Materials for Effective Pollutant Removal in Wastewater Treatment

With the growth of the global population and the acceleration of industrialization, the problem of water pollution has become increasingly serious, posing a major threat to the ecosystem and human health. Traditional water treatment technologies make it difficult to cope with complex pollution, so the scientific community is actively exploring new and efficient treatment methods. Biochar (BC), as a low-cost, green carbon-based material, exhibits good adsorption and catalytic properties in water treatment due to its porous structure and abundant active functional groups. However, BC's pure adsorption or catalytic capacity is limited, and researchers have dramatically enhanced its performance through modification means, such as loading metals or heteroatoms. In this paper, we systematically review the recent applications of BC and its modified materials for water treatment in adsorption, Fenton-like, electrocatalytic, photocatalytic, and sonocatalytic systems, and discuss their adsorption/catalytic mechanisms. However, most of the research in this field is at the laboratory simulation stage and still needs much improvement before it can be applied in large-scale wastewater treatment. This review improves the understanding of the pollutant adsorption/catalytic properties and mechanisms of BC-based materials, analyzes the limitations of the current studies, and investigates future directions.

Non-radical oxidation driven by iron-based materials without energy assistance in wastewater treatment

Chemical oxidation is extensively utilized to mitigate the impact of organic pollutants in wastewater. The non-radical oxidation driven by iron-based materials is noted for its environmental friendliness and resistance to wastewater matrix, and it is a promising approach for practical wastewater treatment. However, the complexity of heterogeneous systems and the diversity of evolutionary pathways make the mechanisms of non-radical oxidation driven by iron-based materials elusive. This work provides a systematic review of various non-radical oxidation systems driven by iron-based materials, including singlet oxygen (1O2), reactive iron species (RFeS), and interfacial electron transfer. The unique mechanisms by which iron-based materials activate different oxidants (ozone, hydrogen peroxide, persulfate, periodate, and peracetic acid) to produce non-radical oxidation are described. The roles of active sites and the unique structures of iron-based materials in facilitating non-radical oxidation are discussed. Commonly employed identification methods in wastewater treatment are compared, such as quenching, chemical probes, spectroscopy, mass spectrometry, and electrochemical testing. According to the process of iron-based materials driving non-radical oxidation to remove organic pollutants, the driving factors at different stages are summarized. Finally, challenges and countermeasures are proposed in terms of mechanism exploration, detection methods and practical applications of non-radical oxidation driven by iron-based materials. This work provides valuable insights for understanding and developing non-radical oxidation systems.

Synergistic activation of peroxymonosulfate by 3D CoNiO2/Co core-shell structure biochar catalyst for sulfamethoxazole degradation

In this study, a 3D CoNiO2/Co core-shell structure biochar catalyst derived from walnut shell was synthesized by hydrothermal and ion etching methods. The prepared BC@CoNi-600 catalyst exhibited exceptional peroxymonosulfate (PMS) activation. The system achieved 100 % degradation of sulfamethoxazole (SMX). The reactive oxygen species in the BC@CoNi-600/PMS system included SO4-, OH, and O2-. Density functional theory calculations explored the synergistic effects between nickel-cobalt bimetallic and carbon matrix during PMS activation. The unique 3D core-shell structure of BC@CoNi-600 features an outer nickel-cobalt bimetallic layer with exceptional PMS adsorption capacity, while protecting the zero-valence Co of the inner layer from oxidation. Based on the experimental-data, machine learning modeling mechanism, and information theory, a nonlinear modeling method was proposed. This study utilizes a machine learning approach to investigate the degradation of SMX in complex aquatic environments. This study synthesized a novel biochar-based catalyst for activated PMS and provided unique insights into its environmental applications.

Selective oxidation decontamination in cobalt molybdate activated Fenton-like oxidation via synergic effect of cobalt and molybdenum

In this study, cobalt molybdate (CoMoO4) activated peracetic acid (PAA) was developed for water purification. CoMoO4/PAA system could remove 95% SMX with pseudo-first-order reaction rate constant of 0.15410 min-1, which was much higher than CoFe2O4/PAA, FeMoO4/PAA, and CoMoO4/persulfate systems. CoMoO4/PAA system follows a non-radical species pathway dominated by the high-valent cobalt (Co(IV)), and CH3C(O)OO• shows a minor contribution to decontamination. Density functional theory (DFT) calculation indicates that the generation of Co(IV) is thermodynamically more favorable than CH3C(O)OO• generation. The abundant Co(IV) generation was attributed to the special structure of CoMoO4 and effect of molybdenum on redox cycle of Co(II)/Co(III). DFT calculation showed that the atoms of SMX with higher ƒ0 and ƒ- values are the main attack sites, which are in accordance with the results of degradation byproducts. CoMoO4/PAA system can effectively reduce biological toxicity after the reaction. Benefiting from the selective of Co(IV) and CH3C(O)OO•, the established CoMoO4/PAA system exhibits excellent anti-interference capacity and satisfactory decontamination performance under actual water conditions. Furthermore, the system was capable of good potential practical application for efficient removal of various organics and favorable reuse. Overall, this study provides a new strategy by CoMoO4 activated PAA for decontamination with high efficiency, high selectivity and favorable anti-interference.

Boosting acetaminophen degradation in water by peracetic acid activation: A novel approach using chestnut shell-derived biochar at varied pyrolysis temperatures

In this study, biochar derived from chestnut shells was synthesized through pyrolysis at varying temperatures from 300 °C to 900 °C. The study unveiled that the pyrolysis temperature is pivotal in defining the physical and chemical attributes of biochar, notably its adsorption capabilities and its role in activating peracetic acid (PAA) for the efficient removal of acetaminophen (APAP) from aquatic environments. Notably, the biochar processed at 900 °C, referred to as CN900, demonstrated an exceptional adsorption efficiency of 55.8 mg g-1, significantly outperforming its counterparts produced at lower temperatures (CN300, CN500, and CN700). This enhanced performance of CN900 is attributed to its increased surface area, improved micro-porosity, and a greater abundance of oxygen-containing functional groups, which are a consequence of the elevated pyrolysis temperature. These oxygen-rich functional groups, such as carbonyls, play a crucial role in facilitating the decomposition of the O-O bond in PAA, leading to the generation of reactive oxygen species (ROS) through electron transfer mechanisms. This investigation contributes to the development of sustainable and cost-effective materials for water purification, underscoring the potential of chestnut shell-derived biochar as an efficient adsorbent and catalyst for PAA activation, thereby offering a viable solution for environmental cleanup efforts.

Electrocatalytic Generation of Singlet Oxygen via ROS-Mediated Redox Chain Reaction for Efficient Disinfection

The risk of harmful microorganisms to ecosystems and human health has stimulated exploration of singlet oxygen (1O2)-based disinfection. It can be potentially generated via an electrocatalytic process, but is limited by the low production yield and unclear intermediate-mediated mechanism. Herein, we designed a two-site catalyst (Fe/Mo-N/C) for the selective 1O2 generation. The Mo sites enhance the generation of 1O2 precursors (H2O2), accompanied by the generation of intermediate •HO2/•O2-. The Fe site facilitates activation of H2O2 into •OH, which accelerates the •HO2/•O2- into 1O2. A possible mechanism for promoting 1O2 production through the ROS-mediated chain reaction is reported. The as-developed electrochemical disinfection system can kill 1 × 107 CFU mL-1 of E. coli within 8 min, leading to cell membrane damage and DNA degradation. It can be effectively applied for the disinfection of medical wastewater. This work provides a general strategy for promoting the production of 1O2 through electrocatalysis and for efficient electrochemical disinfection.

Regulating charge transfer for enhanced PAA activation over sulfur-doped magnetic CoFe2O4: A novel strategy for simultaneous micropollutants degradation and bacteria inactivation

Micropollutants and bacteria are prevalent pollutants in wastewater, posing significant risks to ecosystems and human health. As peracetic acid (PAA) is being increasingly used as a disinfectant, activation of PAA by low-cost and high-performance activators is a promising strategy for wastewater treatment. In this study, the sulfur-doped magnetic CoFe2O4 (SCFO) is successfully developed for efficient PAA activation to simultaneously decontaminate and disinfect wastewater. PAA/SCFO-0.3 exhibits exceptional performance, degrading 100 % of 8 μM sulfamethoxazole (SMX) with a first-pseudo reaction rate of 1.275 min-1, and achieving 5.3-log inactivation of Escherichia coli (E. coli) within 3 min at a PAA dosage of 0.2 mM and catalyst dosage of 0.025 g/L (initial pH 6.5). Scavenging experiments and electron paramagnetic resonance (EPR) analysis identify CH3C(O)O• and CH3C(O)OO• as the dominant reactive species for SMX degradation. The sulfur species in SCFO-0.3 facilitate Co2+ regeneration and regulate charge transfer, promoting PAA activation for SMX degradation. Moreover, the PAA/SCFO-0.3 system demonstrates operational feasibility over a broad range of water matrices and has excellent stability and reusability (maintaining 93 % removal of SMX after 5 cycles), demonstrating its potential for industrial applications. This study provides insights into enhancing PAA activation through sulfur doping in transition metal catalysts and highlights the practical applicability of the PAA/SCFO-0.3 system as an advanced alternative to conventional disinfection for simultaneous decontamination and disinfection in wastewater.

Peracetic acid activated by nickel cobaltite as effective oxidizing agent for BPA and its analogues degradation

The presented research concerns the use of nickel cobaltite nanoparticles (NiCo2O4 NPs) for the heterogeneous activation of peracetic acid and application of NiCo2O4-PAA system for degradation 10 organic micropollutants from the group of bisphenols. The bisphenols removal (initial concentration 1 μM) process was optimized by selecting the appropriate process conditions. The optimal amount of catalyst (115 mg/L), peracetic acid (PAA) concentration (7 mM) and pH (7) were determined using response surface analysis in the Design of Experiment. Then, NiCo2O4 NPs were used to check the possibility of reuse in subsequent oxidation cycles. The work also attempts to explain the mechanism of oxidation of the studied micropollutants. The participation of the sorption process on the catalyst was excluded and based on the experiments with radical scavengers it can be concluded that the oxidation proceeds in a radical pathway, mainly with participation of O2•- radicals. Experiments conducted in real water matrices exhibit low impact on degradation efficiency. Toxicity tests with green alga Acutodesmus obliquus and aquatic plant Lemna minor showed that post-reaction mixture influenced growth and the content of photosynthetic pigments in concentration dependent manner.

Infancy of peracetic acid activation by iron, a new Fenton-based process: A review

The exacerbated global water scarcity and stricter water directives are leading to an increment in the recycled water use, requiring the development of new cost-effective advanced water treatments to provide safe water to the population. In this sense, peracetic acid (PAA, CH3C(O)OOH) is an environmentally friendly disinfectant with the potential to challenge the dominance of chlorine in large wastewater treatment plants in the near future. PAA can be used as an alternative oxidant to H2O2 to carry out the Fenton reaction, and it has recently been proven as more effective than H2O2 towards emerging pollutants degradation at circumneutral pH values and in the presence of anions. PAA activation by homogeneous and heterogeneous iron-based materials generates - besides HO• and FeO2+ - more selective CH3C(O)O• and CH3C(O)OO• radicals, slightly scavenged by typical HO• quenchers (e.g., bicarbonates), which extends PAA use to complex water matrices. This is reflected in an exponential progress of iron-PAA publications during the last few years. Although some reviews of PAA general properties and uses in water treatment were recently published, there is no account on the research and environmental applications of PAA activation by Fe-based materials, in spite of its gratifying progress. In view of these statements, here we provide a holistic review of the types of iron-based PAA activation systems and analyse the diverse iron compounds employed to date (e.g., ferrous and ferric salts, ferrate(VI), spinel ferrites), the use of external ferric reducing/chelating agents (e.g., picolinic acid, l-cysteine, boron) and of UV-visible irradiation systems, analysing the mechanisms involved in each case. Comparison of PAA activation by iron vs. other transition metals (particularly cobalt) is also discussed. This work aims at providing a thorough understanding of the Fe/PAA-based processes, facilitating useful insights into its advantages and limitations, overlooked issues, and prospects, leading to its popularisation and know-how increment.