1
|
Mutlu E, Şenocak A, Demirbaş E, Koca A, Akyüz D. Selective and sensitive molecularly imprinted polymer-based electrochemical sensor for detection of deltamethrin. Food Chem 2024; 463:141121. [PMID: 39255709 DOI: 10.1016/j.foodchem.2024.141121] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/08/2024] [Revised: 08/01/2024] [Accepted: 09/01/2024] [Indexed: 09/12/2024]
Abstract
Electrochemical sensors have a broad range of industrial applications due to their sensitivity, speed, and cost-effectiveness. These sensors enable the continuous monitoring and control of critical parameters in various industrial processes. For instance, they are essential in food safety, environmental monitoring, biomedical applications, and pharmaceutical production. In the food industry, electrochemical sensors facilitate the rapid and reliable detection of contaminants and pathogens in food products, thus enhancing product quality and consumer safety. An electrochemical sensor was developed with the molecularly imprinted polymer (MIP) technique to detect deltamethrin with high sensitivity and selectivity. The sensor was fabricated by electrodeposition of Co3O4 on indium tin oxide (ITO), followed by electropolymerization of o-phenylenediamine with deltamethrin as a template molecule. The template molecules were then removed from the modified electrode by a methanol. The MIP-based electrochemical sensor exhibited high sensitivity and selectivity towards deltamethrin. Under the optimized conditions, the LOD values for the MIP/Co3O4/ITO electrode in the first and second linear regressions were 1.53 nM for linear range of 2.82 nM to 56.5 nM and 0.34 μM for linear range of 0.25 μM to 3.98 μM. Moreover, the LOD values for the NIP/Co3O4/ITO electrode in the first and second regressions were 2.43 nM for the linear range of 3.91 nM to 65.0 nM and 726.0 nM for the linear range of 0.023 μM to 4.5 μM. The developed electrochromic pesticide sensor, being an electrochemical-based molecularly imprinted polymer (MIP) sensor incorporating electrochromic materials, enables both target-specific pesticide detection and visual pesticide identification based on color changes dependent on pesticide concentration. Consequently, this system is more advantageous compared to electrochemical-based MIP sensors, as it provides both qualitative and quantitative determinations. The qualitative assessment aims to enhance the ease of use of the sensor, thereby increasing the potential for it to become a commercially viable product by reducing the need for instrumental devices.
Collapse
Affiliation(s)
- Esma Mutlu
- Department of Chemistry, Faculty of Science, Gebze Technical University, Kocaeli, Türkiye
| | - Ahmet Şenocak
- Department of Chemistry, Faculty of Science, Gebze Technical University, Kocaeli, Türkiye
| | - Erhan Demirbaş
- Department of Chemistry, Faculty of Science, Gebze Technical University, Kocaeli, Türkiye
| | - Atıf Koca
- Department of Chemical Engineering, Faculty of Engineering, Marmara University, Istanbul, Türkiye
| | - Duygu Akyüz
- Department of Chemistry, Faculty of Science, Gebze Technical University, Kocaeli, Türkiye.
| |
Collapse
|
2
|
Kaniraja G, Karthikeyan M, Dhinesh Kumar M, Ananthappan P, Arunsunai Kumar K, Shanmugaiah V, Sivasamy Vasantha V, Karunakaran C. Cytochrome c electrochemical detection utilizing molecularly imprinted poly(3, 4-ethylenedioxythiophene) on a disposable screen printed carbon electrode. Anal Biochem 2024; 692:115557. [PMID: 38718955 DOI: 10.1016/j.ab.2024.115557] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/23/2024] [Revised: 04/04/2024] [Accepted: 05/06/2024] [Indexed: 05/14/2024]
Abstract
Cytochrome c (cyt c) has been found to play a function in apoptosis in cell-free models. This work presents the creation of molecularly imprinted conducting poly(3, 4-ethylenedioxythiopene) (MIPEDOT) on the surface of a screen printed carbon electrode (SPCE) for cyt c. Cyt c was imprinted by electropolymerization due to the presence of an EDOT monomer hydrophobic functional group on SPCE, using CV to obtain highly selective materials with excellent molecular recognition ability. MIPEDOT was characterized by CV, EIS, and DPV using ferricyanide/ferrocyanide as a redox probe. Further, the characterization of the sensor was accomplished using SEM for surface morphological confirmation. Using CV, the peak current measured at the potential of +1 to -1 V (vs. Ag/AgCl) is linear in the cyt c concentration range from 1 to 1200 pM, showing a remarkably low detection limit of 0.5 pM (sensitivity:0.080 μA pM). Moreover, the applicability of the approach was successfully confirmed with the detection of cyt c in biological samples (human plasma). Similarly, our research has proven a low-cost, simple, and efficient sensing platform for cyt c detection, rendering it a viable tool for the future improvement of reliable and exact non-encroaching cell death detection.
Collapse
Affiliation(s)
- Ganesan Kaniraja
- Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India
| | - Murugesan Karthikeyan
- Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India
| | - Marimuthu Dhinesh Kumar
- Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India
| | - Periyasamy Ananthappan
- Department of Natural Products Chemistry, School of Chemistry, Madurai Kamaraj University, Madurai, 625 021, Tamil Nadu, India
| | - Karuppiah Arunsunai Kumar
- Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India
| | - Vellasamy Shanmugaiah
- Department of Microbial Technology, School of Biological Science, Madurai Kamaraj University, Madurai, 625 021, Tamil Nadu, India
| | - Vairathevar Sivasamy Vasantha
- Department of Natural Products Chemistry, School of Chemistry, Madurai Kamaraj University, Madurai, 625 021, Tamil Nadu, India
| | - Chandran Karunakaran
- Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India.
| |
Collapse
|
3
|
Ayman Saleh M, Khorrami Jahromi A, Shieh H, Siavash Moakhar R, Del Real Mata C, Mahshid S. A reagentless molecularly imprinted polymer-based electrochemical biosensor for single-step detection of troponin I in biofluids. Analyst 2024; 149:4020-4028. [PMID: 38961728 DOI: 10.1039/d4an00247d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/05/2024]
Abstract
Reagentless molecular-imprinted polymer (MIP) electrochemical biosensors can offer the next generation of biosensing platforms for the detection of biomarkers owing to their simplicity, cost-efficacy, tunability, robustness, and accuracy. In this work, a novel combination of Prussian blue (PB), coated as an embedded redox probe on a gold working electrode (GWE), and a signal-off MIP assay has been proposed in an electrochemical format for the detection of troponin I (TnI) in biofluids. TnI is a variant exclusive to heart muscles, and its elevated level in the bloodstream is indicative of acute myocardial infarction (AMI). The proposed lab-manufactured PB/MIP electrochemical biosensor, consisting of a simple signal-off MIP assay and a PB redox probe embedded on the GWE surface, is the first of its kind that allows for reagentless, label-free, and single-step electrochemical biosensing of proteins. The preparation steps of the biosensor were fully characterized by cyclic voltammetry (CV), atomic force microscopy (AFM), and Raman spectroscopy. Finally, the performance of the optimized biosensor was investigated through the determination of various concentrations of TnI, ranging from 10 to 100 pg mL-1 within 5 min, in serum and plasma with limits of detection less than 3.6 pg mL-1, and evaluation of selectivity towards TnI using some relevant proteins that exist in biofluids with higher concentrations.
Collapse
Affiliation(s)
- Mahmoud Ayman Saleh
- McGill University, Department of Bioengineering, Montreal, QC, H3A 0E9, Canada
| | | | - Hamed Shieh
- McGill University, Department of Bioengineering, Montreal, QC, H3A 0E9, Canada
| | | | | | - Sara Mahshid
- McGill University, Department of Bioengineering, Montreal, QC, H3A 0E9, Canada
- Department of Experimental Medicine, McGill University, Montréal, Quebec, H3G 2M1, Canada.
| |
Collapse
|
4
|
Dhinesh Kumar M, Karthikeyan M, Kaniraja G, Muthukumar K, Muneeswaran G, Karunakaran C. Computational modelling and optimization studies of electropentamer for molecular imprinting of DJ-1. J Mol Graph Model 2024; 128:108715. [PMID: 38306790 DOI: 10.1016/j.jmgm.2024.108715] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/09/2023] [Revised: 01/12/2024] [Accepted: 01/12/2024] [Indexed: 02/04/2024]
Abstract
Parkinson's disease (PD) is the most prevalent type of incurable movement disorder. Recent research findings propose that the familial PD-associated molecule DJ-1 exists in cerebrospinal fluid (CSF) and that its levels may be altered as Parkinson's disease advances. By using a molecularly imprinted polymer (MIP) as an artificial receptor, it becomes possible to create a functional MIP with predetermined selectivity for various templates, particularly for the DJ-1 biomarker associated with Parkinson's disease. It mostly depends on molecular recognition via interactions between functional monomers and template molecules. So, the computational methods for the appropriate choice of functional monomers for creating molecular imprinting electropolymers (MIEPs) with particular recognition for the detection of DJ-1, a pivotal biomarker involved in PD, are undertaken in this study. Here, molecular docking, molecular dynamics simulations (MD), molecular mechanics Poisson-Boltzmann surface area (MM-PBSA) methods, and quantum mechanical calculation have been applied to investigate the intermolecular interaction between DJ-1 and several functional electropentamers, viz., polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT), poly(o-aminophenol) (POAP), and polythiophene (PTS). In this context, the electropentamers were selected to mimic the imprinted electropolymer system. We analyzed the most stable configurations of the formed complexes involving DJ-1 and electropentamers as a model system for MIEPs. Among these, PEDOT exhibited a more uniform arrangement around DJ-1, engaging in numerous van der Waals, H-bond, electrostatic, and hydrophobic interactions. Hence, it can be regarded as a preferable choice for synthesizing a MIP for DJ-1 recognition. Thus, it will aid in selecting a suitable functional monomer, which is of greater significance in the design and development of selective DJ-1/MIP sensors.
Collapse
Affiliation(s)
- Marimuthu Dhinesh Kumar
- Biomedical Research Laboratory, Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India
| | - Murugesan Karthikeyan
- Biomedical Research Laboratory, Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India
| | - Ganesan Kaniraja
- Biomedical Research Laboratory, Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India
| | | | - Gurusamy Muneeswaran
- Department of Chemical Engineering, National Taiwan University, Taipei, 10617, Taiwan
| | - Chandran Karunakaran
- Biomedical Research Laboratory, Department of Chemistry, Virudhunagar Hindu Nadars' Senthikumara Nadar College (Autonomous & Affiliated to Madurai Kamaraj University), Virudhunagar, 626 001, Tamil Nadu, India.
| |
Collapse
|
5
|
Zhang X, Yarman A, Kovács N, Bognár Z, Gyurcsányi RE, Bier FF, Scheller FW. Specific features of epitope-MIPs and whole-protein MIPs as illustrated for AFP and RBD of SARS-CoV-2. Mikrochim Acta 2024; 191:242. [PMID: 38573524 DOI: 10.1007/s00604-024-06325-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/18/2023] [Accepted: 03/22/2024] [Indexed: 04/05/2024]
Abstract
Molecularly imprinted polymer (MIP) nanofilms for alpha-fetoprotein (AFP) and the receptor binding domain (RBD) of the spike protein of SARS-CoV-2 using either a peptide (epitope-MIP) or the whole protein (protein-MIP) as the template were prepared by electropolymerization of scopoletin. Conducting atomic force microscopy revealed after template removal and electrochemical deposition of gold a larger surface density of imprinted cavities for the epitope-imprinted polymers than when using the whole protein as template. However, comparable affinities towards the respective target protein (AFP and RBD) were obtained for both types of MIPs as expressed by the KD values in the lower nanomolar range. On the other hand, while the cross reactivity of both protein-MIPs towards human serum albumin (HSA) amounts to around 50% in the saturation region, the nonspecific binding to the respective epitope-MIPs is as low as that for the non-imprinted polymer (NIP). This effect might be caused by the different sizes of the imprinted cavities. Thus, in addition to the lower costs the reduced nonspecific binding is an advantage of epitope-imprinted polymers for the recognition of proteins.
Collapse
Affiliation(s)
- Xiaorong Zhang
- Institute of Biochemistry and Biology, University of Potsdam, Karl-Liebknecht Str. 24-25, 14476, Potsdam, Germany.
| | - Aysu Yarman
- Molecular Biotechnology, Faculty of Science, Turkish-German University, Sahinkaya Cad. Beykoz, Istanbul, 34820, Turkey
| | - Norbert Kovács
- BME "Lendület" Chemical Nanosensors Research Group, Department of Inorganic and Analytical Chemistry, Budapest University of Technology and Economics, Műegyetem rkp. 3, 1111, Budapest, Hungary
| | - Zsófia Bognár
- BME "Lendület" Chemical Nanosensors Research Group, Department of Inorganic and Analytical Chemistry, Budapest University of Technology and Economics, Műegyetem rkp. 3, 1111, Budapest, Hungary
| | - Róbert E Gyurcsányi
- BME "Lendület" Chemical Nanosensors Research Group, Department of Inorganic and Analytical Chemistry, Budapest University of Technology and Economics, Műegyetem rkp. 3, 1111, Budapest, Hungary
- HUN-REN-BME Computation Driven Chemistry Research Group, Műegyetem rkp. 3, 1111, Budapest, Hungary
| | - Frank F Bier
- Institute of Biochemistry and Biology, University of Potsdam, Karl-Liebknecht Str. 24-25, 14476, Potsdam, Germany
| | - Frieder W Scheller
- Institute of Biochemistry and Biology, University of Potsdam, Karl-Liebknecht Str. 24-25, 14476, Potsdam, Germany
| |
Collapse
|
6
|
Li Y, Luo L, Kong Y, Li Y, Wang Q, Wang M, Li Y, Davenport A, Li B. Recent advances in molecularly imprinted polymer-based electrochemical sensors. Biosens Bioelectron 2024; 249:116018. [PMID: 38232451 DOI: 10.1016/j.bios.2024.116018] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2023] [Revised: 01/04/2024] [Accepted: 01/08/2024] [Indexed: 01/19/2024]
Abstract
Molecularly imprinted polymers (MIPs) are the equivalent of natural antibodies and have been widely used as synthetic receptors for the detection of disease biomarkers. Benefiting from their excellent chemical and physical stability, low-cost, relative ease of production, reusability, and high selectivity, MIP-based electrochemical sensors have attracted great interest in disease diagnosis and demonstrated superiority over other biosensing techniques. Here we compare various types of MIP-based electrochemical sensors with different working principles. We then evaluate the state-of-the-art achievements of the MIP-based electrochemical sensors for the detection of different biomarkers, including nucleic acids, proteins, saccharides, lipids, and other small molecules. The limitations, which prevent its successful translation into practical clinical settings, are outlined together with the potential solutions. At the end, we share our vision of the evolution of MIP-based electrochemical sensors with an outlook on the future of this promising biosensing technology.
Collapse
Affiliation(s)
- Yixuan Li
- Institute for Materials Discovery, University College London, London, WC1E 7JE, UK
| | - Liuxiong Luo
- School of Materials Science and Engineering, Central South University, Changsha, 410083, China
| | - Yingqi Kong
- Institute for Materials Discovery, University College London, London, WC1E 7JE, UK
| | - Yujia Li
- Institute for Materials Discovery, University College London, London, WC1E 7JE, UK
| | - Quansheng Wang
- Heilongjiang Academy of Traditional Chinese Medicine, Harbin, 150036, China
| | - Mingqing Wang
- Institute for Materials Discovery, University College London, London, WC1E 7JE, UK
| | - Ying Li
- Department of Brain Repair and Rehabilitation, Institute of Neurology, University College London, WC1N 3BG, UK
| | - Andrew Davenport
- Department of Renal Medicine, University College London, London, NW3 2PF, UK
| | - Bing Li
- Institute for Materials Discovery, University College London, London, WC1E 7JE, UK.
| |
Collapse
|
7
|
Sarvutiene J, Prentice U, Ramanavicius S, Ramanavicius A. Molecular imprinting technology for biomedical applications. Biotechnol Adv 2024; 71:108318. [PMID: 38266935 DOI: 10.1016/j.biotechadv.2024.108318] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/18/2023] [Revised: 01/14/2024] [Accepted: 01/20/2024] [Indexed: 01/26/2024]
Abstract
Molecularly imprinted polymers (MIPs), a type of biomimetic material, have attracted considerable interest owing to their cost-effectiveness, good physiochemical stability, favourable specificity and selectivity for target analytes, and widely used for various biological applications. It was demonstrated that MIPs with significant selectivity towards protein-based targets could be applied in medicine, diagnostics, proteomics, environmental analysis, sensors, various in vivo and/or in vitro applications, drug delivery systems, etc. This review provides an overview of MIPs dedicated to biomedical applications and insights into perspectives on the application of MIPs in newly emerging areas of biotechnology. Many different protocols applied for the synthesis of MIPs are overviewed in this review. The templates used for molecular imprinting vary from the minor glycosylated glycan-based structures, amino acids, and proteins to whole bacteria, which are also overviewed in this review. Economic, environmental, rapid preparation, stability, and reproducibility have been highlighted as significant advantages of MIPs. Particularly, some specialized MIPs, in addition to molecular recognition properties, can have high catalytic activity, which in some cases could be compared with other bio-catalytic systems. Therefore, such MIPs belong to the class of so-called 'artificial enzymes'. The discussion provided in this manuscript furnishes a comparative analysis of different approaches developed, underlining their relative advantages and disadvantages highlighting trends and possible future directions of MIP technology.
Collapse
Affiliation(s)
- Julija Sarvutiene
- Department of Nanotechnology, Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, Vilnius, Lithuania
| | - Urte Prentice
- Department of Nanotechnology, Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, Vilnius, Lithuania
| | - Simonas Ramanavicius
- Department of Nanotechnology, Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, Vilnius, Lithuania
| | - Arunas Ramanavicius
- Department of Nanotechnology, Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, Vilnius, Lithuania.
| |
Collapse
|
8
|
Ayankojo AG, Reut J, Syritski V. Electrochemically Synthesized MIP Sensors: Applications in Healthcare Diagnostics. BIOSENSORS 2024; 14:71. [PMID: 38391990 PMCID: PMC10886925 DOI: 10.3390/bios14020071] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/22/2023] [Revised: 01/23/2024] [Accepted: 01/27/2024] [Indexed: 02/24/2024]
Abstract
Early-stage detection and diagnosis of diseases is essential to the prompt commencement of treatment regimens, curbing the spread of the disease, and improving human health. Thus, the accurate detection of disease biomarkers through the development of robust, sensitive, and selective diagnostic tools has remained cutting-edge scientific research for decades. Due to their merits of being selective, stable, simple, and having a low preparation cost, molecularly imprinted polymers (MIPs) are increasingly becoming artificial substitutes for natural receptors in the design of state-of-the-art sensing devices. While there are different MIP preparation approaches, electrochemical synthesis presents a unique and outstanding method for chemical sensing applications, allowing the direct formation of the polymer on the transducer as well as simplicity in tuning the film properties, thus accelerating the trend in the design of commercial MIP-based sensors. This review evaluates recent achievements in the applications of electrosynthesized MIP sensors for clinical analysis of disease biomarkers, identifying major trends and highlighting interesting perspectives on the realization of commercial MIP-endowed testing devices for rapid determination of prevailing diseases.
Collapse
Affiliation(s)
| | | | - Vitali Syritski
- Department of Materials and Environmental Technology, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn, Estonia; (A.G.A.); (J.R.)
| |
Collapse
|
9
|
Erdoğan NÖ, Uslu B, Aydoğdu Tığ G. Development of an electrochemical biosensor utilizing a combined aptamer and MIP strategy for the detection of the food allergen lysozyme. Mikrochim Acta 2023; 190:471. [PMID: 37975892 DOI: 10.1007/s00604-023-06054-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/17/2023] [Accepted: 10/17/2023] [Indexed: 11/19/2023]
Abstract
This study aims to develop a MIP-Apt-based electrochemical biosensor for the sensitive and selective determination of Lysozyme (Lyz), a food allergen. For the development of the sensor, in the first stage, modifications were made to the screen-printed electrode (SPE) surface with graphene oxide (GO) and gold nanoparticles (AuNPs) to increase conductivity and surface area. The advantages of using aptamer (Apt) and molecularly imprinted polymer (MIP) technology were combined in a single biointerface in the prepared sensing tool. Surface characterization of the biosensor was performed using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectrometry (XPS), contact angle measurements, cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). A wide linear range from 0.001 to 100 pM was obtained under optimized conditions for the determination of Lyz detection using the proposed MIP-Apt sensing strategy. The limit of detection (LOD) and limit of quantification (LOQ) for Lyz were 3.67 fM and 12 fM, respectively. This biosensor displays high selectivity, repeatability, reproducibility, and long storage stability towards Lyz detection. The results show that a sensitive and selective sensor fabrication is achieved compared with existing methods.
Collapse
Affiliation(s)
- Niran Öykü Erdoğan
- Faculty of Science, Department of Chemistry, Ankara University, 06100, Ankara, Turkey
- Graduate School of Natural and Applied Sciences, Ankara University, Ankara, Turkey
| | - Bengi Uslu
- Faculty of Pharmacy, Department of Analytical Chemistry, Ankara University, 06560, Ankara, Turkey
| | - Gözde Aydoğdu Tığ
- Faculty of Science, Department of Chemistry, Ankara University, 06100, Ankara, Turkey.
| |
Collapse
|
10
|
Singh N, Khan RR, Xu W, Whitham SA, Dong L. Plant Virus Sensor for the Rapid Detection of Bean Pod Mottle Virus Using Virus-Specific Nanocavities. ACS Sens 2023; 8:3902-3913. [PMID: 37738225 DOI: 10.1021/acssensors.3c01478] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/24/2023]
Abstract
This study presents a miniaturized sensor for rapid, selective, and sensitive detection of bean pod mottle virus (BPMV) in soybean plants. The sensor employs molecularly imprinted polymer technology to generate BPMV-specific nanocavities in porous polypyrrole. Leveraging the porous structure, high surface reactivity, and electron transfer properties of polypyrrole, the sensor achieves a sensitivity of 143 μA ng-1 mL cm-2, a concentration range of 0.01-100,000 ng/mL, a detection time of less than 2 min, and a detection limit of 41 pg/mL. These capabilities outperform those of conventional methods, such as enzyme-linked immunosorbent assays and reverse transcription polymerase chain reactions. The sensor possesses the ability to distinguish BPMV-infected soybean plants from noninfected ones while rapidly quantifying virus levels. Moreover, it can reveal the spatial distribution of virus concentration across distinct leaves, a capability not previously attained by cost-effective sensors for such detailed viral data within a plant. The BPMV-specific nanocavities can also be easily restored and reactivated for multiple uses through a simple wash with acetic acid. While MIP-based sensors for plant virus detection have been relatively understudied, our findings demonstrate their potential as portable, on-site diagnostic tools that avoid complex and time-consuming sample preparation procedures. This advancement addresses a critical need in plant virology, enhancing the detection and management of plant viral diseases.
Collapse
Affiliation(s)
- Nawab Singh
- Department of Electrical and Computer Engineering, Iowa State University, Ames, Iowa 50011, United States
- Microelectronics Research Center, Iowa State University, Ames, Iowa 50011, United States
| | - Raufur Rahman Khan
- Department of Electrical and Computer Engineering, Iowa State University, Ames, Iowa 50011, United States
- Microelectronics Research Center, Iowa State University, Ames, Iowa 50011, United States
| | - Weihui Xu
- Department of Plant Pathology, Entomology, and Microbiology, Iowa State University, Ames, Iowa 50011, United States
| | - Steven A Whitham
- Department of Plant Pathology, Entomology, and Microbiology, Iowa State University, Ames, Iowa 50011, United States
| | - Liang Dong
- Department of Electrical and Computer Engineering, Iowa State University, Ames, Iowa 50011, United States
- Microelectronics Research Center, Iowa State University, Ames, Iowa 50011, United States
| |
Collapse
|
11
|
Nemati M, Farajzadeh MA, Afshar Mogaddam MR, Pourali A. Recent Advances in Impedimetric Biosensors Focusing on Myocardial Infarction Diagnosis. Crit Rev Anal Chem 2022:1-14. [PMID: 36576219 DOI: 10.1080/10408347.2022.2156771] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
Acute myocardial infarction is the most common cardiovascular disease and 85% of cardiovascular disease-related deaths are associated with it. The variation in the cardiac troponin concentration is considered as the most significant judge index for acute myocardial infarction diagnosis. Here, a comprehensive insights is given about the impedimetric methods as powerful electrochemical biosensing platforms for cardiac troponin evaluation. Focusing on nano materials, various impedimetric techniques including faradaic and non-faradaic techniques and different transducer modification techniques are addressed. The steps taken by each of the studied platforms to solve the existing problems are discussed and their advantages and drawbacks are highlighted. A glance at the provided table is given a mind into the features of each impedimetric sensors and their comparison are provided.
Collapse
Affiliation(s)
- Mahboob Nemati
- Food and Drug Safety Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Mir Ali Farajzadeh
- Department of Analytical Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz, Iran
- Engineering Faculty, Near East University, Nicosia, North Cyprus, Turkey
| | - Mohammad Reza Afshar Mogaddam
- Food and Drug Safety Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
- Pharmaceutical Analysis Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Ali Pourali
- Food and Drug Safety Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
- Neurosciences Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
| |
Collapse
|
12
|
Yarkaeva Y, Maistrenko V, Dymova D, Zagitova L, Nazyrov M. Polyaniline and poly(2-methoxyaniline) based molecular imprinted polymer sensors for amoxicillin voltammetric determination. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.141222] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
13
|
Campagnol D, Karimian N, Paladin D, Rizzolio F, Ugo P. Molecularly imprinted electrochemical sensor for the ultrasensitive detection of cytochrome c. Bioelectrochemistry 2022; 148:108269. [PMID: 36179393 DOI: 10.1016/j.bioelechem.2022.108269] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/05/2022] [Revised: 09/11/2022] [Accepted: 09/13/2022] [Indexed: 11/02/2022]
Abstract
Cytochrome c (Cyt c) is an important biomarker for the early stage of apoptosis that plays a role in the diagnosis and therapy of several diseases including cancer. Here, an electrochemical sensor based on molecularly imprinted polymer (MIP) for the ultrasensitive detection of Cyt c is studied. It is prepared by electropolymerization of o-phenylenediamine in the presence of Cyt c as template, followed by solvent extraction, resulting in the formation of Cyt c recognition sites. The MIP is characterised by cyclic voltammetry and differential pulse voltammetry, using ferrocenecarboxylic acid as redox probe. Voltammetric data indicates that the MIP-sensor behaves as an electrode with partially blocked surface. The partition isotherm obtained fits the Langmuir model, indicating a high affinity for Cyt c, with an association constant Ka = 5 × 10 11 M-1. DPV measurements allow to achieve extremely high analytical sensitivity and low detection limit, in the femtomolar range, with negligible unspecific adsorption. Satisfactory analytical recovery tests performed in the presence of possible interfering proteins and in diluted human serum confirmed the selectivity of the MIP-sensor as well as its potential applicability for real samples analysis.
Collapse
Affiliation(s)
- Davide Campagnol
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, via Torino 155, 30172 Venice, Italy
| | - Najmeh Karimian
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, via Torino 155, 30172 Venice, Italy.
| | - Dino Paladin
- Dott. Dino Paladin, bic incubatori Fvg, via Flavia 23/1, 34148 Trieste, Italy
| | - Flavio Rizzolio
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, via Torino 155, 30172 Venice, Italy; Pathology Unit, Centro di Riferimento Oncologico di Aviano (C.R.O.) IRCCS, 33081 Aviano, Italy
| | - Paolo Ugo
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, via Torino 155, 30172 Venice, Italy.
| |
Collapse
|
14
|
Park R, Jeon S, Jeong J, Park SY, Han DW, Hong SW. Recent Advances of Point-of-Care Devices Integrated with Molecularly Imprinted Polymers-Based Biosensors: From Biomolecule Sensing Design to Intraoral Fluid Testing. BIOSENSORS 2022; 12:136. [PMID: 35323406 PMCID: PMC8946830 DOI: 10.3390/bios12030136] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/08/2022] [Revised: 02/16/2022] [Accepted: 02/21/2022] [Indexed: 05/11/2023]
Abstract
Recent developments of point-of-care testing (POCT) and in vitro diagnostic medical devices have provided analytical capabilities and reliable diagnostic results for rapid access at or near the patient's location. Nevertheless, the challenges of reliable diagnosis still remain an important factor in actual clinical trials before on-site medical treatment and making clinical decisions. New classes of POCT devices depict precise diagnostic technologies that can detect biomarkers in biofluids such as sweat, tears, saliva or urine. The introduction of a novel molecularly imprinted polymer (MIP) system as an artificial bioreceptor for the POCT devices could be one of the emerging candidates to improve the analytical performance along with physicochemical stability when used in harsh environments. Here, we review the potential availability of MIP-based biorecognition systems as custom artificial receptors with high selectivity and chemical affinity for specific molecules. Further developments to the progress of advanced MIP technology for biomolecule recognition are introduced. Finally, to improve the POCT-based diagnostic system, we summarized the perspectives for high expandability to MIP-based periodontal diagnosis and the future directions of MIP-based biosensors as a wearable format.
Collapse
Affiliation(s)
- Rowoon Park
- Department of Cogno-Mechatronics Engineering, Pusan National University, Busan 46241, Korea; (R.P.); (S.J.); (J.J.); (D.-W.H.)
| | - Sangheon Jeon
- Department of Cogno-Mechatronics Engineering, Pusan National University, Busan 46241, Korea; (R.P.); (S.J.); (J.J.); (D.-W.H.)
| | - Jeonghwa Jeong
- Department of Cogno-Mechatronics Engineering, Pusan National University, Busan 46241, Korea; (R.P.); (S.J.); (J.J.); (D.-W.H.)
| | - Shin-Young Park
- Department of Dental Education and Dental Research Institute, School of Dentistry, Seoul National University, Seoul 03080, Korea;
| | - Dong-Wook Han
- Department of Cogno-Mechatronics Engineering, Pusan National University, Busan 46241, Korea; (R.P.); (S.J.); (J.J.); (D.-W.H.)
- Department of Optics and Mechatronics Engineering, Pusan National University, Busan 46241, Korea
| | - Suck Won Hong
- Department of Cogno-Mechatronics Engineering, Pusan National University, Busan 46241, Korea; (R.P.); (S.J.); (J.J.); (D.-W.H.)
- Department of Optics and Mechatronics Engineering, Pusan National University, Busan 46241, Korea
| |
Collapse
|
15
|
Amouzadeh Tabrizi M, Fernández-Blázquez JP, Medina DM, Acedo P. An ultrasensitive molecularly imprinted polymer-based electrochemical sensor for the determination of SARS-CoV-2-RBD by using macroporous gold screen-printed electrode. Biosens Bioelectron 2022; 196:113729. [PMID: 34736101 PMCID: PMC8547854 DOI: 10.1016/j.bios.2021.113729] [Citation(s) in RCA: 44] [Impact Index Per Article: 22.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2021] [Revised: 10/21/2021] [Accepted: 10/22/2021] [Indexed: 12/15/2022]
Abstract
Herein, a novel molecularly imprinted polymer (MIP) based electrochemical sensor for the determination of the receptor-binding domain of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2-RBD) has been developed. For this purpose, first, a macroporous gold screen-printed electrode (MP-Au-SPE) has been fabricated. The MIP was then synthesized on the surface of the MP-Au-SPE through the electro-polymerization of ortho-phenylenediamine in the presence of SARS-CoV-2-RBD molecules as matrix polymer, and template molecules, respectively. During the fabrication process, the SARS-CoV-2-RBD molecules were embedded in the polymer matrix. Subsequently, the template molecules were removed from the electrode by using alkaline ethanol. The template molecules removal was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), and attenuated total reflectance spectroscopy (ATR). The fabricated MIP film acted as an artificial recognition element for the measurement of SARS-CoV-2-RBD. The EIS technique was used for the measurement of the SARS-CoV-2-RBD in the saliva solution. The electron transfer resistance (Ret) of the MIP-based sensor in a ferri/ferrocyanide solution increased as the SARS-CoV-2-RBD concentration increased due to the occupation of the imprinted cavities by the SARS-CoV-2-RBD. The MIP-based sensor exhibited a good response to the SARS-CoV-2-RBD in the concentration range between 2.0 and 40.0 pg mL-1 with a limit of detection of 0.7 pg mL-1. The obtained results showed that the fabricated MIP sensor has high selectivity sensitivity, and stability.
Collapse
Affiliation(s)
| | | | | | - Pablo Acedo
- Electronic Technology Department, Universidad Carlos III de Madrid, Leganés, Spain.
| |
Collapse
|
16
|
Mostafa AM, Barton SJ, Wren SP, Barker J. Review on molecularly imprinted polymers with a focus on their application to the analysis of protein biomarkers. Trends Analyt Chem 2021. [DOI: 10.1016/j.trac.2021.116431] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
17
|
Voltammetric determination of lactic acid in milk samples using carbon paste electrode modified with chitosan-based magnetic molecularly imprinted polymer. J APPL ELECTROCHEM 2021. [DOI: 10.1007/s10800-021-01619-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
18
|
Wang R, Zong C, Li G, Wang J, Kong T, Li F, Chang J. High-throughput immunosensor chip coupled with a fluorescent DNA dendrimer for ultrasensitive detection of cardiac troponin T. RSC Adv 2021; 11:27523-27529. [PMID: 35480665 PMCID: PMC9037839 DOI: 10.1039/d1ra03420k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2021] [Accepted: 07/13/2021] [Indexed: 11/21/2022] Open
Abstract
A novel fluorescence (FL) imaging platform was established for ultrasensitive and rapid detection of cardiac troponin T (cTnT), based on a high-throughput immunosensor chip and a DNA dendrimer capped with a large number of fluorescent dyes (FDD@Cy5). Through an enzyme-free and step-by-step strategy, FDD@Cy5 was self-assembled facilely. After the formation of a sandwich immunocomplex and biotin–streptavidin conjugation, FDD@Cy5 could be captured on the chip. FL signals emerged from Cy5 under external light and the enrichment of Cy5 on the dendrimer led to signal amplification. A FL image containing 90 spots could be collected instantaneously by laser confocal scanning microscopy and the brightness of all the spots corresponded to the concentrations of target cTnT. Under optimal conditions, the immunosensor chip coupled with FDD@Cy5 exhibited an excellent detection limit of 0.10 pg L−1, a wide linear range from 0.20 pg L−1 to 2.0 ng L−1, a sample consumption down to 3.0 μL and a maximum throughput of 45 tests per h. The proposed approach was also applied to cTnT quantitation in serum samples with acceptable accuracy, providing a new avenue for early diagnosis and the prognosis evaluation of acute myocardial infarction. A novel fluorescence imaging platform based on a high-throughput immunosensor chip and a DNA dendrimer capped with plenty of fluorescent dyes was proposed for ultrasensitive quantitation of cardiac troponin T.![]()
Collapse
Affiliation(s)
- Ruike Wang
- College of Pharmacy, Xinjiang Medical University Urumqi 830011 P. R. China .,State Key Laboratory of Natural Medicines, China Pharmaceutical University Nanjing 210009 P. R. China
| | - Chen Zong
- State Key Laboratory of Natural Medicines, China Pharmaceutical University Nanjing 210009 P. R. China
| | - Gairu Li
- College of Pharmacy, Xinjiang Medical University Urumqi 830011 P. R. China
| | - Junhong Wang
- Jiangsu Province Hospital, Nanjing Medical University First Affiliated Hospital Nanjing 210029 P. R. China
| | - Tiantian Kong
- Xinjiang Medical University Affiliated Second Hospital Urumqi 830063 P. R. China
| | - Fei Li
- College of Pharmacy, Xinjiang Medical University Urumqi 830011 P. R. China .,State Key Laboratory of Natural Medicines, China Pharmaceutical University Nanjing 210009 P. R. China
| | - Junmin Chang
- College of Pharmacy, Xinjiang Medical University Urumqi 830011 P. R. China
| |
Collapse
|
19
|
Lin YT, Wang LK, Cheng YT, Lee CK, Tsai HE. Molecularly Imprinted Polymer/Anodic Aluminum Oxide Nanocomposite Sensing Electrode for Low-Concentration Troponin T Detection for Patient Monitoring Applications. ACS Sens 2021; 6:2429-2435. [PMID: 34101435 DOI: 10.1021/acssensors.1c00738] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
Various clinical studies have shown that myocardial troponin T (cTnT) is highly correlated with acute myocardial infarction (AMI). A highly sensitive molecularly imprinted polymer (MIP) sensing electrode for the detection of cTnT in patients' blood serum can enable cost-effective, rapid, and real-time testing for patients requiring intensive care. However, the existing MIP-based sensing electrode does not perform well for low-concentration detection of cTnT (<0.2 ng/mL). In this study, a new type of sensing electrode, an anodic aluminum oxide molecularly imprinted (MIP/AAO) nanocomposite electrode is developed. By incorporating the AAO structure, i.e., one-dimensional (1D) pillars, through a semiconductor-compatible process, the new electrode exhibits a great performance improvement, higher sensitivity of 1.08 × 10-4 and 4.25 × 10-4 in the low (<0.03 ng/mL)- and high-concentration regions, respectively, and a lower limit of detection (LoD) of 5.34 pg/mL. Because the composite electrode can maintain a linear characteristic in the measurement range of low-concentration cTnT, it can effectively improve the accuracy and reduce the error in cTnT measurement. In addition, the novel sensing electrode exhibits good reusability and specificity.
Collapse
Affiliation(s)
- Yu-Tsan Lin
- Microsystems Integration Laboratory, Institute of Electronics Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan 300, ROC
| | - Liang-Kai Wang
- Microsystems Integration Laboratory, Institute of Electronics Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan 300, ROC
| | - Yu-Ting Cheng
- Microsystems Integration Laboratory, Institute of Electronics Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan 300, ROC
| | - Chih-Kuo Lee
- Department of Internal Medicine, National Taiwan University Hospital Hsin-Chu Branch, Hsinchu 300, Taiwan, ROC
- Department of Internal Medicine and Graduate Institute of Clinical Medicine, College of Medicine, National Taiwan University, Taipei 10617, Taiwan, ROC
| | - Hsiao-En Tsai
- Department of Surgery, National Taiwan University Hospital Hsin-Chu Branch, Hsinchu, Taiwan 300, ROC
- Department of Internal Medicine and Graduate Institute of Clinical Medicine, College of Medicine, National Taiwan University, Taipei 10617, Taiwan, ROC
| |
Collapse
|
20
|
Dehdari Vais R, Yadegari H, Heli H, Sattarahmady N. A β-Amyloid (1-42) Biosensor Based on Molecularly Imprinted Poly-Pyrrole for Early Diagnosis of Alzheimer's Disease. J Biomed Phys Eng 2021; 11:215-228. [PMID: 33937128 PMCID: PMC8064131 DOI: 10.31661/jbpe.v0i0.1070] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2018] [Accepted: 01/23/2019] [Indexed: 11/16/2022]
Abstract
Background: Alzheimer’s disease (AD) is a common form of dementia, characterized by production and deposition of β-amyloid peptide in the brain.
Thus, β-amyloid peptide is a potentially promising biomarker used to diagnose and monitor the progression of AD. Objective: The study aims to develop a biosensor based on a molecularly imprinted poly-pyrrole for detection of β-amyloid. Material and Methods: In this experimental study, an imprinted poly-pyrrole was employed as an artificial receptor synthesized by electro-polymerization of pyrrole
on screen-printed carbon electrodes in the presence of β-amyloid. β-amyloid acts as a molecular template within the polymer. The biosensor was
evaluated by cyclic voltammetry using ferro/ferricyanide marker. The parameters influencing the biosensor performance, including electro-polymerization
cycle umbers and β-amyloid binding time were optimized to achieve the best biosensor sensitivity. Results: The β-amyloid binding affinity with the biosensor surface was evaluated by the Freundlich isotherm, and Freundlich
constant and exponent were obtained as 0.22 ng mL-1 and 10.60, respectively. The biosensor demonstrated a detection limit of 1.2 pg mL-1.
The biosensor was applied for β-amyloid determination in artificial cerebrospinal fluid. Conclusion: The biosensor is applicable for early Alzheimer’s disease detection.
Collapse
Affiliation(s)
- Rezvan Dehdari Vais
- PhD Candidate, Nanomedicine and Nanobiology Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Hossein Yadegari
- PhD, Department of Mechanical and Materials Engineering, University of Western Ontario, London, Ontario N6A 5B9, Canada
| | - Hossein Heli
- PhD, Nanomedicine and Nanobiology Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
| | - Naghmeh Sattarahmady
- PhD, Nanomedicine and Nanobiology Research Center, Shiraz University of Medical Sciences, Shiraz, Iran
- PhD, Department of Medical Physics, School of Medicine, Shiraz University of Medical Sciences, Shiraz, Iran
| |
Collapse
|
21
|
Abd-Rabboh HSM, E. Amr AEG, Almehizia AA, Kamel AH. All-Solid-State Potentiometric Ion-Sensors Based on Tailored Imprinted Polymers for Pholcodine Determination. Polymers (Basel) 2021; 13:polym13081192. [PMID: 33917178 PMCID: PMC8067864 DOI: 10.3390/polym13081192] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2021] [Revised: 03/27/2021] [Accepted: 04/01/2021] [Indexed: 12/19/2022] Open
Abstract
In recent times, the application of the use of ion-selective electrodes has expanded in the field of pharmaceutical analyses due to their distinction from other sensors in their high selectivity and low cost of measurement, in addition to their high measurement sensitivity. Cost-effective, reliable, and robust all-solid-state potentiometric selective electrodes were designed, characterized, and successfully used for pholcodine determination. The design of the sensor device was based on the use of a screen-printed electrode modified with multiwalled carbon nanotubes (MWCNTs) as a solid-contact transducer. Tailored pholcodine (PHO) molecularly imprinted polymers (MIPs) were prepared, characterized, and used as sensory receptors in the presented potentiometric sensing devices. The sensors exhibited a sensitivity of 31.6 ± 0.5 mV/decade (n = 5, R2 = 0.9980) over the linear range of 5.5 × 10−6 M with a detection limit of 2.5 × 10−7 M. Real serum samples in addition to pharmaceutical formulations containing PHO were analyzed, and the results were compared with those obtained by the conventional standard liquid chromatographic approach. The presented analytical device showed an outstanding efficiency for fast, direct, and low-cost assessment of pholcodine levels in different matrices.
Collapse
Affiliation(s)
- Hisham S. M. Abd-Rabboh
- Chemistry Department, Faculty of Science, King Khalid University, Abha 61413, Saudi Arabia;
- Department of Chemistry, Faculty of Science, Ain Shams University, Cairo 11566, Egypt
| | - Abd El-Galil E. Amr
- Pharmaceutical Chemistry Department, Drug Exploration & Development Chair (DEDC), College of Pharmacy, King Saud University, Riyadh 11451, Saudi Arabia;
- National Research Center, Applied Organic Chemistry Department, Dokki, Giza 12622, Egypt
- Correspondence: (A.E.-G.E.A.); (A.H.K.); Tel.: +966-565-148-750 (A.E.-G.E.A.); +20-1000361328 (A.H.K.)
| | - Abdulrahman A. Almehizia
- Pharmaceutical Chemistry Department, Drug Exploration & Development Chair (DEDC), College of Pharmacy, King Saud University, Riyadh 11451, Saudi Arabia;
| | - Ayman H. Kamel
- Department of Chemistry, Faculty of Science, Ain Shams University, Cairo 11566, Egypt
- Correspondence: (A.E.-G.E.A.); (A.H.K.); Tel.: +966-565-148-750 (A.E.-G.E.A.); +20-1000361328 (A.H.K.)
| |
Collapse
|
22
|
Sanati A, Siavash Moakhar R, I. Hosseini I, Raeissi K, Karimzadeh F, Jalali M, Kharaziha M, Sheibani S, Shariati L, Presley JF, Vali H, Mahshid S. Gold Nano/Micro-Islands Overcome the Molecularly Imprinted Polymer Limitations to Achieve Ultrasensitive Protein Detection. ACS Sens 2021; 6:797-807. [PMID: 33464874 DOI: 10.1021/acssensors.0c01701] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Here, we report on an electrochemical biosensor based on core-shell structure of gold nano/micro-islands (NMIs) and electropolymerized imprinted ortho-phenylenediamine (o-PD) for detection of heart-fatty acid binding protein (H-FABP). The shape and distribution of NMIs (the core) were tuned by controlled electrodeposition of gold on a thin layer of electrochemically reduced graphene oxide (ERGO). NMIs feature a large active surface area to achieve a low detection limit (2.29 fg mL-1, a sensitivity of 1.34 × 1013 μA mM-1) and a wide linear range of detection (1 fg mL-1 to 100 ng mL-1) in PBS. Facile template H-FABP removal from the layer (the shell) in less than 1 min, high specificity against interference from myoglobin and troponin T, great stability at ambient temperature, and rapidity in detection of H-FABP (approximately 30 s) are other advantages of this biomimetic biosensor. The electrochemical measurements in human serum, human plasma, and bovine serum showed acceptable recovery (between 91.1 ± 1.7 and 112.9 ± 2.1%) in comparison with the ELISA method. Moreover, the performance of the biosensor in clinical serum showed lower detection time and limit of detection against lateral flow assay (LFA) rapid test kits, as a reference method. Ultimately, the proposed biosensor based on the core-shell structure of gold NMIs and MIP opens interesting avenues in the detection of proteins with low cost, high sensitivity and significantstability for clinical applications.
Collapse
Affiliation(s)
- Alireza Sanati
- Department of Bioengineering, McGill University, Montreal, Quebec H3A 0E9, Canada
- Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
- Department of Anatomy and Cell Biology, McGill University, Montreal, Quebec H3A 0C7, Canada
- Biosensor Research Center, School of Advanced Technologies in Medicine, Isfahan University of Medical Sciences, Isfahan 81746-73461, Iran
| | | | - Imman I. Hosseini
- Department of Bioengineering, McGill University, Montreal, Quebec H3A 0E9, Canada
| | - Keyvan Raeissi
- Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
| | - Fathallah Karimzadeh
- Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
| | - Mahsa Jalali
- Department of Bioengineering, McGill University, Montreal, Quebec H3A 0E9, Canada
| | - Mahshid Kharaziha
- Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
| | - Sara Sheibani
- Department of Anatomy and Cell Biology, McGill University, Montreal, Quebec H3A 0C7, Canada
| | - Laleh Shariati
- Department of Biomaterials, Nanotechnology, and Tissue Engineering, School of Advanced Technologies in Medicine, Isfahan University of Medical Sciences, Isfahan 81746-73461, Iran
- Applied Physiology Research Center, Isfahan University of Medical Sciences, Isfahan 81746-73461, Iran
| | - John F. Presley
- Department of Anatomy and Cell Biology, McGill University, Montreal, Quebec H3A 0C7, Canada
| | - Hojatollah Vali
- Department of Anatomy and Cell Biology, McGill University, Montreal, Quebec H3A 0C7, Canada
| | - Sara Mahshid
- Department of Bioengineering, McGill University, Montreal, Quebec H3A 0E9, Canada
| |
Collapse
|
23
|
Crapnell RD, Dempsey-Hibbert NC, Peeters M, Tridente A, Banks CE. Molecularly imprinted polymer based electrochemical biosensors: Overcoming the challenges of detecting vital biomarkers and speeding up diagnosis. TALANTA OPEN 2020. [DOI: 10.1016/j.talo.2020.100018] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022] Open
|
24
|
Zhang G, Zhang L, Yu Y, Lin B, Wang Y, Guo M, Cao Y. Dual-mode of electrochemical-colorimetric imprinted sensing strategy based on self-sacrifice beacon for diversified determination of cardiac troponin I in serum. Biosens Bioelectron 2020; 167:112502. [DOI: 10.1016/j.bios.2020.112502] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/28/2020] [Revised: 07/20/2020] [Accepted: 08/06/2020] [Indexed: 02/06/2023]
|
25
|
Djebbi MA, Boubakri S, Braiek M, Jaffrezic‐Renault N, Namour P, Amara ABH. NZVI©Au magnetic nanocomposite‐based electrochemical magnetoimmunosensing for ultrasensitive detection of troponin‐T cardiac biomarker. ELECTROCHEMICAL SCIENCE ADVANCES 2020. [DOI: 10.1002/elsa.202000019] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022] Open
Affiliation(s)
- Mohamed Amine Djebbi
- Laboratory of Ressources, Materials & Ecosystem (RME) Faculty of Sciences of Bizerte University of Carthage Zarzouna Tunisia
- INRAE UR RiverLy, Centre de Lyon‐Villeurbanne Villeurbanne France
- Institute of Analytical Sciences University of Lyon Villeurbanne France
| | - Saber Boubakri
- National Institute for Research and Physico‐chemical Analysis BiotechPole Sidi‐Thabet Ariana Tunisia
| | - Mohamed Braiek
- Institute of Analytical Sciences University of Lyon Villeurbanne France
| | | | - Philippe Namour
- INRAE UR RiverLy, Centre de Lyon‐Villeurbanne Villeurbanne France
| | - Abdesslem Ben Haj Amara
- Laboratory of Ressources, Materials & Ecosystem (RME) Faculty of Sciences of Bizerte University of Carthage Zarzouna Tunisia
| |
Collapse
|
26
|
Chai R, Wang Y, Kan X. Sensitive and selective detection of glycoprotein based on dual-signal and dual-recognition electrochemical sensing platform. Food Chem 2020; 340:127944. [PMID: 32889217 DOI: 10.1016/j.foodchem.2020.127944] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2020] [Revised: 08/18/2020] [Accepted: 08/24/2020] [Indexed: 12/21/2022]
Abstract
Glycoproteins play extraordinary roles in biology and clinic. The specifically sensitive detection of glycoproteins by electrochemical methods is still a challenging task due to their poor electro-activity and sensitive nature to environment. In this work, ovalbumin (OVA), a model glycoprotein, was sensitively detected by a molecularly imprinted polymer (MIP) based electrochemical sensor, which was prepared by electropolymerizing 3-thiophene boric acid in the presence of OVA. Due to boronate affinity, the rebound OVA interacted with ferrocene boric acid (Fc-BA) to construct a sandwich structural sensing platform. Dual-recognition elements, imprinted effect and the boronate affinity, enabled the sensor to recognize OVA from other proteins. The rebinding of OVA caused the current changes of thionine and Fc-BA, which were combined as a dual-signal for OVA sensitive detection with a low limit of detection of 0.82 pg/mL (S/N = 3). The good performances of sensor indicated its potential applications in clinical diagnosis and other related fields.
Collapse
Affiliation(s)
- Rong Chai
- College of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000, China; The Key Laboratory of Functional Molecular Solids, Ministry of Education, Anhui Laboratory of Molecule-Based Materials, Anhui Key Laboratory of Chemo-Biosensing, China
| | - Yuanyuan Wang
- College of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000, China; The Key Laboratory of Functional Molecular Solids, Ministry of Education, Anhui Laboratory of Molecule-Based Materials, Anhui Key Laboratory of Chemo-Biosensing, China
| | - Xianwen Kan
- College of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000, China; The Key Laboratory of Functional Molecular Solids, Ministry of Education, Anhui Laboratory of Molecule-Based Materials, Anhui Key Laboratory of Chemo-Biosensing, China.
| |
Collapse
|
27
|
Bozal-Palabiyik B, Erkmen C, Uslu B. Molecularly Imprinted Electrochemical Sensors: Analytical and Pharmaceutical Applications Based on Ortho-Phenylenediamine Polymerization. CURR PHARM ANAL 2020. [DOI: 10.2174/1573412915666190304150159] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
Background:
The molecular imprinting technique has been applied in many fields including
separation, artificial antibody mimics, catalysis, sensing studies, and drug delivery. The reasons for the
popularity of this technique among the researchers are high selectivity due to the cavities that are
formed on the polymer surface for the specific analyte, high robustness, high durability under extreme
conditions and low cost. When these advantages are combined with the advantages of electrochemical
methods such as rapid response time, ease of use, cheapness and miniaturizability, Molecularly Imprinted
Polymer (MIP) based electrochemical sensors turn out to be a widely-preferred sensing tool.
Objective:
This article provides the reader with information on MIP-based electrochemical sensors and
reviews the applications of the MIP sensors prepared by electropolymerization of orthophenylenediamine,
a monomer whose mechanical and chemical stability is very high.
Results and Conclusion:
The literature survey summarized in this review shows that cyclic voltammetry
is the most widely preferred electrochemical technique for electropolymerization of o-PD. The media
chosen is generally acetate or phosphate buffers with different pH values. Although there are numerous
solvents used for template removal, generally methanol and NaOH have been chosen.
Collapse
Affiliation(s)
- Burcin Bozal-Palabiyik
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, 06560 Yenimahalle, Ankara, Turkey
| | - Cem Erkmen
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, 06560 Yenimahalle, Ankara, Turkey
| | - Bengi Uslu
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, 06560 Yenimahalle, Ankara, Turkey
| |
Collapse
|
28
|
Pereira TC, Stradiotto NR. Electrochemical sensing of lactate by using an electrode modified with molecularly imprinted polymers, reduced graphene oxide and gold nanoparticles. Mikrochim Acta 2019; 186:764. [PMID: 31713083 DOI: 10.1007/s00604-019-3898-3] [Citation(s) in RCA: 27] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2019] [Accepted: 10/06/2019] [Indexed: 11/25/2022]
Abstract
This paper reports on a sensitive and selective electrochemical sensor for lactic acid. The sensor is based on molecularly imprinted polymers (MIP), obtained on glassy carbon electrode (GCE) modified with reduced graphene oxide and gold nanoparticles. The MIP was obtained by electropolymerization of the o-phenylenediamine (o-PD) on the modified surface of the GCE in the presence of lactic acid. The steps involving the GCE modification and MIP construction were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy and atomic force microscopy. The results were evaluated using differential pulse voltammetry, using the hexacyanoferrate redox system as an electrochemical probe. Under optimized experimental conditions, the imprinted sensor has a linear response in the 0.1 nM to 1.0 nM lactic acid concentration range, with detection limit of 0.09 nM. The sensor exhibits excellent selectivity in the presence of molecules of similar chemical structure. It was applied for the selective determination of lactic acid in sugarcane vinasse. The recovery values ranged from 97.7 to 104.8%. Graphical abstractSchematic representation for MIP/AuNP/RGO/GCE sensor, obtained by electropolymerization of o-phenylediamine (o-PD) on a surface modified with gold nanoparticles (AuNPs) and reduced graphene oxide (RGO). These materials allowed the construction of a MIP-sensor with good selectivity for lactic acid.
Collapse
Affiliation(s)
- Thulio César Pereira
- Institute of Chemistry, São Paulo State University (UNESP), Araraquara, São Paulo, CEP:14800-060, Brazil.
- Bioenergy Research Institute, São Paulo State University (UNESP), Araraquara, São Paulo, CEP:14800-060, Brazil.
| | - Nelson Ramos Stradiotto
- Institute of Chemistry, São Paulo State University (UNESP), Araraquara, São Paulo, CEP:14800-060, Brazil
- Bioenergy Research Institute, São Paulo State University (UNESP), Araraquara, São Paulo, CEP:14800-060, Brazil
| |
Collapse
|
29
|
Bottari F, Moro G, Sleegers N, Florea A, Cowen T, Piletsky S, Nuijs ALN, De Wael K. Electropolymerized o‐Phenylenediamine on Graphite Promoting the Electrochemical Detection of Nafcillin. ELECTROANAL 2019. [DOI: 10.1002/elan.201900397] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Fabio Bottari
- AXES research group, Department of ChemistryUniversity of Antwerp Groenenborgerlaan 171-2020 Antwerp Belgium
| | - Giulia Moro
- AXES research group, Department of ChemistryUniversity of Antwerp Groenenborgerlaan 171-2020 Antwerp Belgium
- LSE Research group, Department of Molecular Science and NanosystemsCa' Foscari University of Venice Via Torino 155 30172 Mestre Italy
| | - Nick Sleegers
- AXES research group, Department of ChemistryUniversity of Antwerp Groenenborgerlaan 171-2020 Antwerp Belgium
| | - Anca Florea
- AXES research group, Department of ChemistryUniversity of Antwerp Groenenborgerlaan 171-2020 Antwerp Belgium
| | - Todd Cowen
- Department of ChemistryUniversity of Leicester LE1 7RH Leicester UK
| | - Sergey Piletsky
- Department of ChemistryUniversity of Leicester LE1 7RH Leicester UK
| | - Alexander L. N. Nuijs
- Department of Pharmaceutical SciencesToxicological Centre Universiteitsplein 1 Antwerp 2610 Belgium
| | - Karolien De Wael
- AXES research group, Department of ChemistryUniversity of Antwerp Groenenborgerlaan 171-2020 Antwerp Belgium
| |
Collapse
|
30
|
Regan B, Boyle F, O'Kennedy R, Collins D. Evaluation of Molecularly Imprinted Polymers for Point-of-Care Testing for Cardiovascular Disease. SENSORS (BASEL, SWITZERLAND) 2019; 19:E3485. [PMID: 31395843 PMCID: PMC6720456 DOI: 10.3390/s19163485] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/18/2019] [Revised: 07/29/2019] [Accepted: 08/06/2019] [Indexed: 12/13/2022]
Abstract
Molecular imprinting is a rapidly growing area of interest involving the synthesis of artificial recognition elements that enable the separation of analyte from a sample matrix and its determination. Traditionally, this approach can be successfully applied to small analyte (<1.5 kDa) separation/ extraction, but, more recently it is finding utility in biomimetic sensors. These sensors consist of a recognition element and a transducer similar to their biosensor counterparts, however, the fundamental distinction is that biomimetic sensors employ an artificial recognition element. Molecularly imprinted polymers (MIPs) employed as the recognition elements in biomimetic sensors contain binding sites complementary in shape and functionality to their target analyte. Despite the growing interest in molecularly imprinting techniques, the commercial adoption of this technology is yet to be widely realised for blood sample analysis. This review aims to assess the applicability of this technology for the point-of-care testing (POCT) of cardiovascular disease-related biomarkers. More specifically, molecular imprinting is critically evaluated with respect to the detection of cardiac biomarkers indicative of acute coronary syndrome (ACS), such as the cardiac troponins (cTns). The challenges associated with the synthesis of MIPs for protein detection are outlined, in addition to enhancement techniques that ultimately improve the analytical performance of biomimetic sensors. The mechanism of detection employed to convert the analyte concentration into a measurable signal in biomimetic sensors will be discussed. Furthermore, the analytical performance of these sensors will be compared with biosensors and their potential implementation within clinical settings will be considered. In addition, the most suitable application of these sensors for cardiovascular assessment will be presented.
Collapse
Affiliation(s)
- Brian Regan
- School of Biotechnology, Dublin City University, Dublin 9, Ireland.
| | - Fiona Boyle
- School of Biotechnology, Dublin City University, Dublin 9, Ireland
| | - Richard O'Kennedy
- School of Biotechnology, Dublin City University, Dublin 9, Ireland
- Research Complex, Hamad Bin Khalifa University, Qatar Foundation, Doha, Qatar
| | - David Collins
- School of Biotechnology, Dublin City University, Dublin 9, Ireland
| |
Collapse
|
31
|
Couto RA, Costa SS, Mounssef B, Pacheco JG, Fernandes E, Carvalho F, Rodrigues CM, Delerue-Matos C, Braga AA, Moreira Gonçalves L, Quinaz MB. Electrochemical sensing of ecstasy with electropolymerized molecularly imprinted poly(o-phenylenediamine) polymer on the surface of disposable screen-printed carbon electrodes. SENSORS AND ACTUATORS B: CHEMICAL 2019; 290:378-386. [DOI: 10.1016/j.snb.2019.03.138] [Citation(s) in RCA: 46] [Impact Index Per Article: 9.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/01/2023]
|
32
|
Lach P, Cieplak M, Majewska M, Noworyta KR, Sharma PS, Kutner W. “Gate Effect” in p-Synephrine Electrochemical Sensing with a Molecularly Imprinted Polymer and Redox Probes. Anal Chem 2019; 91:7546-7553. [DOI: 10.1021/acs.analchem.8b05512] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Patrycja Lach
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Maciej Cieplak
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Marta Majewska
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Krzysztof R. Noworyta
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Piyush Sindhu Sharma
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Wlodzimierz Kutner
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
- Faculty of Mathematics and Natural Sciences, School of Sciences, Cardinal Stefan Wyszynski University in Warsaw, Wóycickiego 1/3, 01-815 Warsaw, Poland
| |
Collapse
|
33
|
Bozal‐Palabiyik B, Lettieri M, Uslu B, Marrazza G. Electrochemical Detection of Vascular Endothelial Growth Factor by Molecularly Imprinted Polymer. ELECTROANAL 2019. [DOI: 10.1002/elan.201900185] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
Affiliation(s)
- Burcin Bozal‐Palabiyik
- University of FlorenceDepartment of Chemistry “Ugo Schiff” Via della Lastruccia 3 50019 Sesto Fiorentino Italy
- University of Ankara, Faculty of PharmacyDepartment of Analytical Chemistry 06560 Ankara Turkey
| | - Mariagrazia Lettieri
- University of FlorenceDepartment of Chemistry “Ugo Schiff” Via della Lastruccia 3 50019 Sesto Fiorentino Italy
| | - Bengi Uslu
- University of Ankara, Faculty of PharmacyDepartment of Analytical Chemistry 06560 Ankara Turkey
| | - Giovanna Marrazza
- University of FlorenceDepartment of Chemistry “Ugo Schiff” Via della Lastruccia 3 50019 Sesto Fiorentino Italy
| |
Collapse
|
34
|
Electrochemical Deposition of Nanomaterials for Electrochemical Sensing. SENSORS 2019; 19:s19051186. [PMID: 30857146 PMCID: PMC6427742 DOI: 10.3390/s19051186] [Citation(s) in RCA: 56] [Impact Index Per Article: 11.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/12/2019] [Revised: 03/01/2019] [Accepted: 03/04/2019] [Indexed: 12/12/2022]
Abstract
The most commonly used methods to electrodeposit nanomaterials on conductive supports or to obtain electrosynthesis nanomaterials are described. Au, layered double hydroxides (LDHs), metal oxides, and polymers are the classes of compounds taken into account. The electrochemical approach for the synthesis allows one to obtain nanostructures with well-defined morphologies, even without the use of a template, and of variable sizes simply by controlling the experimental synthesis conditions. In fact, parameters such as current density, applied potential (constant, pulsed or ramp) and duration of the synthesis play a key role in determining the shape and size of the resulting nanostructures. This review aims to describe the most recent applications in the field of electrochemical sensors of the considered nanomaterials and special attention is devoted to the analytical figures of merit of the devices.
Collapse
|
35
|
Yazdani Z, Yadegari H, Heli H. A molecularly imprinted electrochemical nanobiosensor for prostate specific antigen determination. Anal Biochem 2019; 566:116-125. [DOI: 10.1016/j.ab.2018.11.020] [Citation(s) in RCA: 42] [Impact Index Per Article: 8.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/21/2018] [Revised: 10/31/2018] [Accepted: 11/21/2018] [Indexed: 11/30/2022]
|
36
|
Primiceri E, Chiriacò MS, Notarangelo FM, Crocamo A, Ardissino D, Cereda M, Bramanti AP, Bianchessi MA, Giannelli G, Maruccio G. Key Enabling Technologies for Point-of-Care Diagnostics. SENSORS (BASEL, SWITZERLAND) 2018; 18:E3607. [PMID: 30355989 PMCID: PMC6263899 DOI: 10.3390/s18113607] [Citation(s) in RCA: 53] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/03/2018] [Revised: 10/01/2018] [Accepted: 10/16/2018] [Indexed: 12/13/2022]
Abstract
A major trend in biomedical engineering is the development of reliable, self-contained point-of-care (POC) devices for diagnostics and in-field assays. The new generation of such platforms increasingly addresses the clinical and environmental needs. Moreover, they are becoming more and more integrated with everyday objects, such as smartphones, and their spread among unskilled common people, has the power to improve the quality of life, both in the developed world and in low-resource settings. The future success of these tools will depend on the integration of the relevant key enabling technologies on an industrial scale (microfluidics with microelectronics, highly sensitive detection methods and low-cost materials for easy-to-use tools). Here, recent advances and perspectives will be reviewed across the large spectrum of their applications.
Collapse
Affiliation(s)
| | | | | | - Antonio Crocamo
- Azienda Ospedaliero-Universitaria di Parma, via Gramsci 14, 43126 Parma, Italy.
| | - Diego Ardissino
- Azienda Ospedaliero-Universitaria di Parma, via Gramsci 14, 43126 Parma, Italy.
| | - Marco Cereda
- STMicroelectronics S.r.l., via Olivetti 2, 20864 Agrate Brianza, Italy.
| | | | | | - Gianluigi Giannelli
- National Institute of Gastroenterology, "S. De Bellis" Research Hospital, via Turi 27, 70013 Castellana Grotte, Italy.
| | - Giuseppe Maruccio
- Department of Mathematics and Physics, University of Salento, via Monteroni, 73100 Lecce, Italy.
| |
Collapse
|
37
|
Nezami A, Dehghani S, Nosrati R, Eskandari N, Taghdisi SM, Karimi G. Nanomaterial-based biosensors and immunosensors for quantitative determination of cardiac troponins. J Pharm Biomed Anal 2018; 159:425-436. [DOI: 10.1016/j.jpba.2018.07.031] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/31/2018] [Revised: 07/13/2018] [Accepted: 07/17/2018] [Indexed: 01/14/2023]
|
38
|
Silva CF, Borges KB, do Nascimento CS. Rational design of a molecularly imprinted polymer for dinotefuran: theoretical and experimental studies aimed at the development of an efficient adsorbent for microextraction by packed sorbent. Analyst 2018; 143:141-149. [PMID: 29120471 DOI: 10.1039/c7an01324h] [Citation(s) in RCA: 31] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
In this work, we studied theoretically the formation process of a molecularly imprinted polymer (MIP) for dinotefuran (DNF), testing distinct functional monomers (FM) in various solvents through density functional theory calculations. The results revealed that the best conditions for MIP synthesis were established with methacrylic acid (MAA) as FM in a 1 : 4 stoichiometry and with chloroform as the solvent. This protocol showed the most favourable stabilization energies for the pre-polymerization complexes. Furthermore, the formation of the FM/template complex is enthalpy driven and the occurrence of hydrogen bonds between the DNF and MAA plays a major role in the complex stability. To confirm the theoretical results, MIP was experimentally synthesized considering the best conditions found at the molecular level and characterized by scanning electron microscopy and thermogravimetric analysis. After that, the synthesized material was efficiently employed in microextraction by packed sorbent combined with high-performance liquid chromatography in a preliminary study of the recovery of DNF from water and artificial saliva samples.
Collapse
Affiliation(s)
- Camilla Fonseca Silva
- Departamento de Ciências Naturais, Universidade Federal de São João del-Rei, Campus Dom Bosco, Praça Dom Helvécio 74, Fábricas, 36301-160, São João del-Rei, Minas Gerais, Brazil.
| | | | | |
Collapse
|
39
|
Karimian N, Stortini AM, Moretto LM, Costantino C, Bogialli S, Ugo P. Electrochemosensor for Trace Analysis of Perfluorooctanesulfonate in Water Based on a Molecularly Imprinted Poly( o-phenylenediamine) Polymer. ACS Sens 2018; 3:1291-1298. [PMID: 29911865 DOI: 10.1021/acssensors.8b00154] [Citation(s) in RCA: 60] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
Abstract
This work is aimed at developing an electrochemical sensor for the sensitive and selective detection of trace levels of perfluorooctanesulfonate (PFOS) in water. Contamination of waters by perfluorinated alkyl substances (PFAS) is a problem of global concern due to their suspected toxicity and ability to bioaccumulate. PFOS is the perfluorinated compound of major concern, as it has the lowest suggested control concentrations. The sensor reported here is based on a gold electrode modified with a thin coating of a molecularly imprinted polymer (MIP), prepared by anodic electropolymerization of o-phenylenediamine (o-PD) in the presence of PFOS as the template. Activation of the sensor is achieved by template removal with suitable a solvent mixture. Voltammetry, a quartz crystal microbalance, scanning electron microscopy and elemental analysis were used to monitor the electropolymerization process, template removal, and binding of the analyte. Ferrocenecarboxylic acid (FcCOOH) has been exploited as an electrochemical probe able to generate analytically useful voltammetric signals by competing for the binding sites with PFOS, as the latter is not electroactive. The sensor has a low detection limit (0.04 nM), a satisfactory selectivity, and is reproducible and repeatable, giving analytical results in good agreement with those obtained by HPLC-MS/MS analyses.
Collapse
Affiliation(s)
- Najmeh Karimian
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, via Torino 155, 30172 Venezia Mestre, Italy
| | - Angela M. Stortini
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, via Torino 155, 30172 Venezia Mestre, Italy
| | - Ligia M. Moretto
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, via Torino 155, 30172 Venezia Mestre, Italy
| | - Claudio Costantino
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, via Torino 155, 30172 Venezia Mestre, Italy
| | - Sara Bogialli
- Department of Chemical Sciences, University of Padova, via F. Marzolo 1, 35131 Padova, Italy
| | - Paolo Ugo
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, via Torino 155, 30172 Venezia Mestre, Italy
| |
Collapse
|
40
|
Bakirhan NK, Ozcelikay G, Ozkan SA. Recent progress on the sensitive detection of cardiovascular disease markers by electrochemical-based biosensors. J Pharm Biomed Anal 2018; 159:406-424. [PMID: 30036704 DOI: 10.1016/j.jpba.2018.07.021] [Citation(s) in RCA: 59] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2018] [Revised: 07/07/2018] [Accepted: 07/16/2018] [Indexed: 12/15/2022]
Abstract
Cardiovascular disease is the most reason for deaths in all over the world. Hence, biomarkers of cardiovascular diseases are very crucial for diagnosis and management process. Biomarker detection demand is opened the important way in biosensor development field. Rapid, cheap, portable, precise, selective and sensitive biomarker sensing devices are needed at this point to detect and predict disease. A cardiac biomarker can be orderable as C-reactive protein, troponin I or T, myoglobin, tumor necrosis factor alpha, interleukin-6, interleukin-1, lipoprotein-associated phospholipase, low-density lipoprotein and myeloperoxidase. They are used for prediction of cardiovascular diseases. There are many methods for early diagnosis of cardiovascular diseases, but these have long time process and expensive devices. In recent studies, different biosensors have been developed to remove the problems in this field. Electrochemical devices and developed biosensors have many superiorities than others such as low cost, mobile, reliable, repeatable, need a little amount of solution. In this review, recent studies were presented as details for cardiovascular disease biomarkers detection using electrochemical methods.
Collapse
Affiliation(s)
- Nurgul K Bakirhan
- Hitit University, Faculty of Arts and Sciences, Department of Chemistry, Corum, Turkey
| | - Goksu Ozcelikay
- Ankara University, Faculty of Pharmacy, Department of Analytical Chemistry, Tandogan, Ankara, Turkey
| | - Sibel A Ozkan
- Ankara University, Faculty of Pharmacy, Department of Analytical Chemistry, Tandogan, Ankara, Turkey.
| |
Collapse
|
41
|
Palladino P, Minunni M, Scarano S. Cardiac Troponin T capture and detection in real-time via epitope-imprinted polymer and optical biosensing. Biosens Bioelectron 2018; 106:93-98. [DOI: 10.1016/j.bios.2018.01.068] [Citation(s) in RCA: 55] [Impact Index Per Article: 9.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/21/2017] [Revised: 01/25/2018] [Accepted: 01/30/2018] [Indexed: 10/18/2022]
|
42
|
Dabrowski M, Lach P, Cieplak M, Kutner W. Nanostructured molecularly imprinted polymers for protein chemosensing. Biosens Bioelectron 2018; 102:17-26. [DOI: 10.1016/j.bios.2017.10.045] [Citation(s) in RCA: 102] [Impact Index Per Article: 17.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2017] [Revised: 10/04/2017] [Accepted: 10/21/2017] [Indexed: 02/08/2023]
|
43
|
Shanmugam NR, Muthukumar S, Tanak AS, Prasad S. Multiplexed electrochemical detection of three cardiac biomarkers cTnI, cTnT and BNP using nanostructured ZnO-sensing platform. Future Cardiol 2018; 14:131-141. [DOI: 10.2217/fca-2017-0074] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022] Open
Abstract
Aim: Development of a label-free multiplexed point-of-care diagnostic device for a panel of cardiac biomarkers – cardiac troponin-T (cTnT), troponin-I (cTnI) and B-type natriuretic peptide (BNP). Methods: A nonfaradaic electrochemical immunoassay designed with anisotropic high surface area ZnO nanostructures grown using low-temperature hydrothermal methods was selectively immobilized with capture antibodies. Multiplexed detection in human serum using ZnO nanostructures based on complementary electrochemical measurement techniques – electrochemical impedance spectroscopy and Mott–Schottky. Results: Linear signal response for detection of three biomarkers in human serum with dynamic range of 1 pg/ml–100 ng/ml and limit of detection at 1 pg/ml and low signal response to background interferences was achieved. Conclusion: First demonstration of simultaneous detection of three cardiac biomarkers in clinically relevant range with sensor's analytical performance and linear response of detection showed potential utility in screening clinical samples for early diagnosis of acute myocardial infarction and chronic heart failure.
Collapse
Affiliation(s)
| | | | | | - Shalini Prasad
- Department of Bioengineering, University of Texas at Dallas, Richardson, TX 75080, USA
| |
Collapse
|
44
|
Zheng W, Zhao M, Liu W, Yu S, Niu L, Li G, Li H, Liu W. Electrochemical sensor based on molecularly imprinted polymer/reduced graphene oxide composite for simultaneous determination of uric acid and tyrosine. J Electroanal Chem (Lausanne) 2018. [DOI: 10.1016/j.jelechem.2018.02.022] [Citation(s) in RCA: 41] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
45
|
Gui R, Jin H, Guo H, Wang Z. Recent advances and future prospects in molecularly imprinted polymers-based electrochemical biosensors. Biosens Bioelectron 2018; 100:56-70. [DOI: 10.1016/j.bios.2017.08.058] [Citation(s) in RCA: 262] [Impact Index Per Article: 43.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/03/2017] [Revised: 08/08/2017] [Accepted: 08/27/2017] [Indexed: 01/13/2023]
|
46
|
Shumyantseva VV, Bulko TV, Sigolaeva LV, Kuzikov AV, Pogodin PV, Archakov AI. Molecular imprinting coupled with electrochemical analysis for plasma samples classification in acute myocardial infarction diagnostic. Biosens Bioelectron 2018; 99:216-222. [DOI: 10.1016/j.bios.2017.07.026] [Citation(s) in RCA: 20] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/03/2017] [Revised: 06/30/2017] [Accepted: 07/10/2017] [Indexed: 10/19/2022]
|
47
|
Photoresponsive hollow molecularly imprinted polymer for trace triamterene in biological samples. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2017; 76:568-578. [DOI: 10.1016/j.msec.2017.03.135] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/27/2016] [Accepted: 03/13/2017] [Indexed: 12/19/2022]
|
48
|
Zanato N, Talamini L, Zapp E, Brondani D, Vieira IC. Label-free Electrochemical Immunosensor for Cardiac Troponin T Based on Exfoliated Graphite Nanoplatelets Decorated with Gold Nanoparticles. ELECTROANAL 2017. [DOI: 10.1002/elan.201700157] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Nicole Zanato
- Department of Chemistry; Federal University of Santa Catarina - Campus Florianópolis; 88040-900 Florianópolis, SC Brazil
| | - Lucas Talamini
- Department of Chemistry; Federal University of Santa Catarina - Campus Florianópolis; 88040-900 Florianópolis, SC Brazil
| | - Eduardo Zapp
- Department of Exact Sciences and Education; Federal University of Santa Catarina - Campus Blumenau; 89036-256 Blumenau, SC Brazil
| | - Daniela Brondani
- Department of Exact Sciences and Education; Federal University of Santa Catarina - Campus Blumenau; 89036-256 Blumenau, SC Brazil
| | - Iolanda Cruz Vieira
- Department of Chemistry; Federal University of Santa Catarina - Campus Florianópolis; 88040-900 Florianópolis, SC Brazil
| |
Collapse
|
49
|
Recent progress in electrochemical sensing of cardiac troponin by using nanomaterial-induced signal amplification. Mikrochim Acta 2017. [DOI: 10.1007/s00604-017-2219-y] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
|
50
|
Selvolini G, Marrazza G. MIP-Based Sensors: Promising New Tools for Cancer Biomarker Determination. SENSORS 2017; 17:s17040718. [PMID: 28353669 PMCID: PMC5421678 DOI: 10.3390/s17040718] [Citation(s) in RCA: 84] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/01/2017] [Revised: 03/24/2017] [Accepted: 03/27/2017] [Indexed: 12/12/2022]
Abstract
Detecting cancer disease at an early stage is one of the most important issues for increasing the survival rate of patients. Cancer biomarker detection helps to provide a diagnosis before the disease becomes incurable in later stages. Biomarkers can also be used to evaluate the progression of therapies and surgery treatments. In recent years, molecularly imprinted polymer (MIP) based sensors have been intensely investigated as promising analytical devices in several fields, including clinical analysis, offering desired portability, fast response, specificity, and low cost. The aim of this review is to provide readers with an overview on recent important achievements in MIP-based sensors coupled to various transducers (e.g., electrochemical, optical, and piezoelectric) for the determination of cancer biomarkers by selected publications from 2012 to 2016.
Collapse
Affiliation(s)
- Giulia Selvolini
- Department of Chemistry "Ugo Schiff", University of Florence, Via della Lastruccia 3, Sesto Fiorentino 50019, Italy.
| | - Giovanna Marrazza
- Department of Chemistry "Ugo Schiff", University of Florence, Via della Lastruccia 3, Sesto Fiorentino 50019, Italy.
| |
Collapse
|