Label-free signal-on aptasensor for sensitive electrochemical detection of arsenite

Nanomaterial-based optical colorimetric sensors for rapid monitoring of inorganic arsenic species: a review

Health concerns about the toxicity of arsenic compounds have therefore encouraged the development of new analytical tools for quick monitoring of arsenic in real samples with improved sensitivity, selectivity, and reliability. An overview of advanced optical colorimetric sensor techniques for real-time monitoring of inorganic arsenic species in the environment is given in this review paper. Herein, several advanced optical colorimetric sensor techniques for arsenite (As+3) and arsenate (As+5) based on doping chromogenic dyes/reagents, biomolecule-modified nanomaterials, and arsenic-binding ligand tethered nanomaterials are introduced and discussed. This review also highlights the benefits and limitations of the colorimetric sensor for arsenic species. Finally, prospects and future developments of an optical colorimetric sensor for arsenic species are also proposed. For future study in this sector, particularly for field application, authors recommend this review paper will be helpful for readers to understand the design principles and their corresponding sensing mechanisms of various arsenic optical colorimetric sensors.

Ultrasensitive Electrochemiluminescence Sensor Utilizing Aggregation-Induced Emission Active Probe for Accurate Arsenite Quantification in Rice Grains

Arsenic (As) constitutes a substantial threat to global ecosystems and public health. An accurate quantification of inorganic arsenite (As(III)) in rice grains is crucial for ensuring food safety and human well-being. Herein, we constructed an electrochemiluminescence (ECL) biosensor utilizing aggregation-induced emission (AIE) active Pdots for the sensitive detection of As(III) in rice. We synthesized tetraphenylethylene-based AIE-active Pdots, exhibiting stable and highly efficient ECL emission in their aggregated states. Owing to the overlap of spectra, we employed an electrochemiluminescence resonance energy transfer (ECL-RET) system, with the Pdots as the donor and black hole quencher (BHQ) as the acceptor. Upon the introduction of As(III), the conformational changes of As(III)-specific aptamer could trigger the detachment of BHQ-labeled DNA aptamer from the electrode surface, leading to the recovery of the ECL signal. The target-induced "signal-on" bioassay enabled the sensitive and specific detection of As(III) with a linear range of 10 pM to 500 nM, with an ultralow limit of detection (LOD) of 5.8 pM/0.4 ppt. These values significantly surpass those of existing sensors designed for As(III) quantification in rice. Furthermore, by employing amylase hydrolysis for efficient extraction, we successfully applied our sensor to measure As(III) in actual rice samples sourced from diverse regions of China. The results obtained using our sensor were in close agreement with those derived from the reference method of HPLC-ICP-MS. This study not only presents a sensitive and reliable method for detecting arsenite but also underscores its potential applications in enhancing food safety, agriculture practices, and environmental monitoring.

Pesticide biosensors: trends and progresses

Pesticides, chemical substances extensively employed in agriculture to optimize crop yields, pose potential risks to human and environmental health. Consequently, regulatory frameworks are in place to restrict pesticide residue concentrations in water intended for human consumption. These regulations are implemented to safeguard consumer safety and mitigate any adverse effects on the environment and public health. Although gas chromatography- and liquid chromatography-mass spectrometry (GC-MS and LC-MS) are highly efficient techniques for pesticide quantification, their use is not suitable for real-time monitoring due to the need for sophisticated laboratory pretreatment of samples prior to analysis. Since they would enable analyte detection with selectivity and sensitivity without sample pretreatment, biosensors appear as a promising alternative. These consist of a bioreceptor allowing for specific recognition of the target and of a detection platform, which translates the biological interaction into a measurable signal. As early detection systems remain urgently needed to promptly alert and act in case of pollution, we review here the biosensors described in the literature for pesticide detection to advance their development for use in the field.

An electrochemical sensor for the detection of arsenic using nanocomposite-modified electrode

The aim of this research is to develop an electrochemical sensor based on a conducting polymer, polyaniline, and a cationic polymer, poly(diallyldimethylammonium chloride), reinforced with graphene oxide nanosheets functionalized with acrylic acid. The two-dimensional nature of acrylic acid functionalized graphene oxide nanosheets and clusters made of conductive polymers and acrylic acid functionalized graphene oxide nanosheets were confirmed by microscopic tests. The prepared nanocomposite was deposited on the glassy carbon electrode in order to prepare an electrochemical sensor for the detection of arsenic by cyclic voltammetry and differential pulse voltammetry methods. It should be mentioned that the presence of acrylic acid functionalized graphene oxide nanosheets increases the surface area due to the nano size effect and better dispersion of this nanomaterial, poly(diallyldimethylammonium chloride), increases the adsorption capacity of the analyte due to electrostatic interaction between the negatively charged analyte and positively charged surface, and polyanilin increases the charge transfer rate due to the good conductivity. The results show that the prepared electrode has a sensitivity equal to 1.79 A/M with 0.12 μM as the detection limit. The proposed sensor could be used for the determination of total inorganic arsenic by first oxidative pretreatment for conversion of As(III) to As(V).

Low-cost, portable, on-site fluorescent detection of As(III) by a paper-based microfluidic device based on aptamer and smartphone imaging

A turn-on fluorescent aptasensor based on a paper-based microfluidic chip was developed to detect arsenite via aptamer competition strategy and smartphone imaging. The chip was prepared by wax-printing hydrophilic channels on filter paper. It is portable, low-cost, and environmentally friendly. Double-stranded DNA consisting of aptamer and fluorescence-labeled complementary strands was immobilized on the reaction zone of the paper chip. Due to the specific strong binding between aptamer and arsenite, the fluorescent complementary strand was squeezed out and driven by capillary force to the detection area of the paper chip, so that the fluorescent signal arose in the detection area under the excitation wavelength of 488 nm. Arsenite can be quantified by using smartphone imaging and RGB image analysis. Under the optimal conditions, the paper-based microfluidic aptasensor exhibited excellent linear response over a wide range of 1 to 1000 nM, with a detection limit as low as 0.96 nM (3σ).

Laser-induced graphene-based electrochemical biosensors for environmental applications: a perspective

Biosensors are miniaturized devices that provide the advantage of in situ and point-of-care monitoring of analytes of interest. Electrochemical biosensors use the mechanism of oxidation-reduction reactions and measurement of corresponding electron transfer as changes in current, voltage, or other parameters using different electrochemical techniques. The use of electrochemically active materials is critical for the effective functioning of electrochemical biosensors. Laser-induced graphene (LIG) has garnered increasing interest in biosensor development and improvement due to its high electrical conductivity, specific surface area, and simple and scalable fabrication process. The effort of this perspective is to understand the existing classes of analytes and the mechanisms of their detection using LIG-based biosensors. The manuscript has highlighted the potential use of LIG, its modifications, and its use with various receptors for sensing various environmental pollutants. Although the conventional graphene-based sensors effectively detect trace levels for many analytes in different applications, the chemical and energy-intensive fabrication and time-consuming processes make it imperative to explore a low-cost and scalable option such as LIG for biosensors production. The focus of these potential biosensors has been kept on detection analytes of environmental significance such as heavy metals ions, organic and inorganic compounds, fertilizers, pesticides, pathogens, and antibiotics. The use of LIG directly as an electrode, its modifications with nanomaterials and polymers, and its combination with bioreceptors such as aptamers and polymers has been summarized. The strengths, weaknesses, opportunities, and threats analysis has also been done to understand the viability of incorporating LIG-based electrochemical biosensors for environmental applications.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Advances from conventional to real time detection of heavy metal(loid)s for water monitoring: An overview of biosensing applications

The rapid growth of the industrial sector has expedited the accumulation of heavy metal(loid)s in the environment at hazardous levels. The elements such as arsenic, lead, mercury, cadmium and chromium are lethal in terms of toxicity with severe health impacts. With issues like water scarcity, limitations in wastewater treatment, and costs pertaining to detection in environmental matrices; their rapid and selective detection for reuse of effluents is of the utmost priority. Biosensors are the futuristic tool for the accurate qualitative and quantitative analysis of a specific analyte and integrate biotechnology, microelectronics and nanotechnology to fabricate a miniaturized device without compromising the sensitivity, specificity and accuracy. The characteristic features of supporting matrix largely affect the biosensing ability of the device and incorporation of highly sensitive and durable metal organic frameworks (MOFs) are reported to enhance the efficiency of advanced biosensors. Electrochemical biosensors are among the most widely developed biosensors for the detection of heavy metal(loids), while direct electron transfer approach from the recognition element to the electrode has been found to decrease the chances of interference. This review provides an insight into the recent progress in biosensor technologies for the detection of prevalent heavy metal(loid)s; using advanced support systems such as functional metal-based nanomaterials, carbon nanotubes, quantum dots, screen printed electrodes, glass beads etc. The review also delves critically in comparison of various techno-economic studies and the latest advances in biosensor technology.

Cell-free arsenic biosensors with applied nanomaterials: critical analysis

Arsenic is a ubiquitously found metalloid in our ecosystem because of natural and anthropogenic activities. People exposed to a higher level of arsenic become susceptible to several disorders, including cancer. According to current statistics, the population chronically exposed to arsenic has surpassed 200 million. Therefore, its detection in our environment is of great importance. There are many analytical techniques for the assessment of arsenic in different kinds of environmental samples. Among these techniques, the biosensor is considered a convenient platform and a widely applied analytical device for rapid qualitative and quantitative analysis in the field of environmental monitoring, food safety, and disease diagnosis. Today, there is a trend of including nanomaterials in sensors and biosensors because it empowers researchers to explore new arsenic detection methods and to enhance their analytical capabilities. In this review article, we summarized the latest developments in arsenic biosensors in particular with emphasis on the works based on cell-free approaches that are protein/enzyme-based, DNA-based, and aptamer-based utilizing various transduction platforms. In the meantime, we compared the capabilities that were related to these cell-free arsenic biosensors. This review article also highlights the development and application of novel nanomaterials for arsenic detection.

Advances in Electrochemical Detection Electrodes for As(III)

Arsenic is extremely abundant in the Earth’s crust and is one of the most common environmental pollutants in nature. In the natural water environment and surface soil, arsenic exists mainly in the form of trivalent arsenite (As(III)) and pentavalent arsenate (As(V)) ions, and its toxicity can be a serious threat to human health. In order to manage the increasingly serious arsenic pollution in the living environment and maintain a healthy and beautiful ecosystem for human beings, it is urgent to conduct research on an efficient sensing method suitable for the detection of As(III) ions. Electrochemical sensing has the advantages of simple instrumentation, high sensitivity, good selectivity, portability, and the ability to be analyzed on site. This paper reviews various electrode systems developed in recent years based on nanomaterials such as noble metals, bimetals, other metals and their compounds, carbon nano, and biomolecules, with a focus on electrodes modified with noble metal and metal compound nanomaterials, and evaluates their performance for the detection of arsenic. They have great potential for achieving the rapid detection of arsenic due to their excellent sensitivity and strong interference immunity. In addition, this paper discusses the relatively rare application of silicon and its compounds as well as novel polymers in achieving arsenic detection, which provides new ideas for investigating novel nanomaterial sensing. We hope that this review will further advance the research progress of high-performance arsenic sensors based on novel nanomaterials.

Multiplexed detection of heavy metal ions by single plasmonic nanosensors

Detection of multiple analytes simultaneously in small liquid samples with high efficiency and precision is highly important to the fields like water quality monitoring. In this letter, we present a multiplexed nanosensors with position-encoded aptamer functionalized gold nanorods for heavy metal ions detection. The individual gold nanorods respond specifically to two different heavy metal ions (Pb²⁺ and Hg²⁺) with a spectral shift in the scattering spectrum. We used a home-built spectral imaging dark-field microscope to measure the response of thousands of single plasmonic nanosensors with relatively high time resolution and precision. To explore the performance and limit of detection (LOD) of our nanosensor and setup, we recorded the concentration-dependent response of our position-encoded nanosensors with a series of mixture solutions that contain different concentrations of Hg²⁺ and Pb²⁺ ions. The LOD levels of our system are around 5 nM for Pb²⁺ ions and 1 nM for Hg²⁺ ions. Our method and results demostrate the nanomolar sensitivity and the potential to detect more different heavy metal ions.

Recent Advancement in Disposable Electrode Modified with Nanomaterials for Electrochemical Heavy Metal Sensors

Heavy metal pollution has gained global attention due to its high toxicity and non-biodegradability, even at a low level of exposure. Therefore, the development of a disposable electrode that is sensitive, simple, portable, rapid, and cost-effective as the sensor platform in electrochemical heavy metal detection is vital. Disposable electrodes have been modified with nanomaterials so that excellent electrochemical properties can be obtained. This review highlights the recent progress in the development of numerous types of disposable electrodes modified with nanomaterials for electrochemical heavy metal detection. The disposable electrodes made from carbon-based, glass-based, and paper-based electrodes are reviewed. In particular, the analytical performance, fabrication technique, and integration design of disposable electrodes modified with metal (such as gold, tin and bismuth), carbon (such as carbon nanotube and graphene), and metal oxide (such as iron oxide and zinc oxide) nanomaterials are summarized. In addition, the role of the nanomaterials in improving the electrochemical performance of the modified disposable electrodes is discussed. Finally, the current challenges and future prospect of the disposable electrode modified with nanomaterials are summarized.

Silica and graphene mediate arsenic detection in mature rice grain by a newly patterned current-volt aptasensor

Arsenic is a major global threat to the ecosystem. Here we describe a highly accurate sensing platform using silica nanoparticles/graphene at the surface of aluminum interdigitated electrodes (Al IDE), able to detect trace amounts of arsenic(III) in rice grain samples. The morphology and electrical properties of fabricated Al IDEs were characterized and standardized using AFM, and SEM with EDX analyses. Micrometer scale Al IDEs were fabricated with silicon, aluminum, and oxygen as primary elements. Validation of the bare Al IDE with electrolyte fouling was performed at different pH levels. The sensing surface was stable with no electrolyte fouling at pH 7. Each chemical modification step was monitored with current-volt measurement. The surface chemical bonds were characterized by fourier transform infrared spectroscopy (FTIR) and revealed different peaks when interacting with arsenic (1600-1000 cm^-1). Both silica nanoparticles and graphene presented a sensitive limit of detection as measured by slope calibration curves at 0.0000001 pg/ml, respectively. Further, linear regression was established using ΔI (A) = 3.86 E^-09 log (Arsenic concentration) [g/ml] + 8.67 E^-08 [A] for silica nanoparticles, whereas for graphene Y = 3.73 E^-09 (Arsenic concentration) [g/ml] + 8.52 E^-08 on the linear range of 0.0000001 pg/ml to 0.01 pg/ml. The R² for silica (0.96) and that of graphene (0.94) was close to the maximum (1). Modification with silica nanoparticles was highly stable. The potential use of silica nanoparticles in the detection of arsenic in rice grain extract can be attributed to their size and stability.

Electrochemical detection of heavy metal ions in water

Heavy metal ions are one of the main sources of water pollution. Most heavy metal ions are carcinogens that pose a threat to both ecological balance and human health. With the increasing demand for heavy metal detection, electrochemical detection is favorable due to its high sensitivity and efficiency. Here, after discussing the pollution sources and toxicities of Hg(ii), Cd(ii), As(iii), Pb(ii), UO₂(ii), Tl(i), Cr(vi), Ag(i), and Cu(ii), we review a variety of recent electrochemical methods for detecting heavy metal ions. Compared with traditional methods, electrochemical methods are portable, fast, and cost-effective, and they can be adapted to various on-site inspection sites. Our review shows that the electrochemical detection of heavy metal ions is a very promising strategy that has attracted widespread attention and can be applied in agriculture, life science, clinical diagnosis, and analysis.

Electrochemical Determination of Lead & Copper Ions Using Thiolated Calix[4]arene-Modified Screen-Printed Carbon Electrode

This study used a thiolated calix[4]arene derivative modified on gold nanoparticles and a screen-printed carbon electrode (TC4/AuNPs/SPCE) for Pb2+ and Cu2+ determination. The surface of the modified electrode was characterised via Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). Differential pulse voltammetry (DPV) was used for the detection of Pb2+ and Cu2+ under optimum conditions. The limit of detection (LOD) for detecting Pb2+ and Cu2+ was 0.7982 × 10−2 ppm and 1.3358 × 10−2 ppm, respectively. Except for Zn2+ and Hg2+, the presence of competitive ions caused little effect on the current response when detecting Pb2+. However, all competitive ions caused a significant drop in the current response when detecting Cu2+, except Ca2+ and Mg2+, suggesting the sensing platform is more selective toward Pb2+ ions rather than copper (Cu2+) ions. The electrochemical sensor demonstrated good reproducibility and excellent stability with a low relative standard deviation (RSD) value in detecting lead and copper ions. Most importantly, the result obtained in the analysis of Pb2+ and Cu2+ had good recovery in river water, demonstrating the applicability of the developed sensor for real samples.

A Facile Aptasensor for Instantaneous Determination of Cadmium Ions Based on Fluorescence Amplification Effect of MOPS on FAM-Labeled Aptamer

Analytical performance and efficiency are two pivotal issues for developing an on-site and real-time aptasensor for cadmium (Cd²⁺) determination. However, suffering from redundant preparations, fabrications, and incubation, most of them fail to well satisfy the requirements. In this work, we found that fluorescence intensity of 6-carboxyfluorescein(FAM)-labeled aptamer (FAM-aptamer) could be remarkably amplified by 3-(N-morpholino)propane sulfonic acid (MOPS), then fell proportionally as Cd²⁺ concentration introduced. Importantly, the fluorescence variation occurred immediately after addition of Cd²⁺, and would keep stable for at least 60 min. Based on the discovery, a facile and ultra-efficient aptasensor for Cd²⁺ determination was successfully developed. The sensing mechanism was confirmed by fluorescence pattern, circular dichroism (CD) and intermolecular interaction related to pK_a. Under the optimal conditions, Cd²⁺ could be determined rapidly from 5 to 4000 ng mL^-1. The detection limit (1.92 ng mL^-1) was also lower than the concentration limit for drinking water set by WHO and EPA (3 and 5 ng mL^-1, respectively). More than a widely used buffer, MOPS was firstly revealed to have fluorescence amplification effect on FAM-aptamer upon a given context. Despite being sensitive to pH, this simple, high-performance and ultra-efficient aptasensor would be practical for on-site and real-time monitoring of Cd²⁺.

Capture-SELEX for aptamer selection: A short review

The emerging aptamer, developed through the systematic evolution of ligands by exponential enrichment (SELEX) process, has revolutionized and facilitated the discoveries in basic research. Among all SELEX technology, Capture-SELEX is a variant of the in vitro selection process, which is suitable for isolating aptamers against small molecules. Capture-SELEX library was developed to enable the immobilization of the oligonucleotides instead of the target molecules during the aptamer selection process. The review provides an update on the recent-advances in this new screening method with particular emphasis on key points of capture protocol and its applications. The limitations and the prospects of the Capture-SELEX are also discussed. We hope that present review will inspire more researchers to understand the selection problems from the perspective of Capture-SELEX. Moreover, it will open new pave to improve the efficiency and success of screening to meet the growing demand for aptasensor discovery in small molecules.

Recent Advances in Nanotechnology-Based Biosensors Development for Detection of Arsenic, Lead, Mercury, and Cadmium

Heavy metals cause considerable environmental pollution due to their extent and non-degradability in the environment. Analysis and trace levels of arsenic, lead, mercury, and cadmium as the most toxic heavy metals show that they can cause various hazards in humans' health. To achieve rapid, high-sensitivity methods for analyzing ultra-trace amounts of heavy metals in different environmental and biological samples, novel biosensors have been designed with the participation of strategies applied in nanotechnology. This review attempted to investigate the novel, sensitive, efficient, cost-benefit, point of care, and user-friendly biosensors designed to detect these heavy metals based on functional mechanisms. The study's search strategies included examining the primary databases from 2015 onwards and various keywords focusing on heavy metal biosensors' performance and toxicity mechanisms. The use of aptamers and whole cells as two important bio-functional nanomaterials is remarkable in heavy metal diagnostic biosensors' bioreceptor design. The application of hybridized nanomaterials containing a specific physicochemical function in the presence of a suitable transducer can improve the sensing performance to achieve an integrated detection system. Our study showed that in addition to both labeled and label-free detection strategies, a wide range of nanoparticles and nanocomposites were used to modify the biosensor surface platform in the detection of heavy metals. The detection limit and linear dynamic range as an essential characteristic of superior biosensors for the primary toxic metals are studied. Furthermore, the perspectives and challenges facing the design of heavy metal biosensors are outlined. The development of novel biosensors and the application of nanotechnology, especially in real samples, face challenges such as the capability to simultaneously detect multiple heavy metals, the interference process in complex matrices, the efficiency and stability of nanomaterials implemented in various laboratory conditions.

A electrochemical biosensor for As(III) detection based on the catalytic activity of Alcaligenes faecalis immobilized on a gold nanoparticle-modified screen-printed carbon electrode

A electrochemical biosensor for As(III) determination has been developed by immobilization of the Alcaligenis faecalis bacteria on gold nanoparticle-modified screen-printed carbon electrode (AuNPs-SPCE). The detection of As(III) is due to the catalytic activity of arsenite oxidase enzyme which oxidizes As(III) to As(V) producing an analytical signal. To enhance the performance of the biosensor, was optimized the amount of bacteria, amount of glutaraldehyde and incubation time applied in the preparation of the electrode, in addition to the effect of pH and applied potential. The analytical application was carried out applying 300 mV (pH = 7) obtaining a LOD of 6.61 μmol L^-1 (R = 0.9975) and 700 mV (pH = 12) obtaining a LOD of 1.84 μmol L^-1 (R = 0.9983). AF/AuNPs-SPCE was applied to the determination of total arsenic in Loa river water samples after reduction, with satisfactory results.

From Small Molecules Toward Whole Cells Detection: Application of Electrochemical Aptasensors in Modern Medical Diagnostics

This paper focuses on the current state of art as well as on future trends in electrochemical aptasensors application in medical diagnostics. The origin of aptamers is presented along with the description of the process known as SELEX. This is followed by the description of the broad spectrum of aptamer-based sensors for the electrochemical detection of various diagnostically relevant analytes, including metal cations, abused drugs, neurotransmitters, cancer, cardiac and coagulation biomarkers, circulating tumor cells, and viruses. We described also possible future perspectives of aptasensors development. This concerns (i) the approaches to lowering the detection limit and improvement of the electrochemical aptasensors selectivity by application of the hybrid aptamer-antibody receptor layers and/or nanomaterials; and (ii) electrochemical aptasensors integration with more advanced microfluidic devices as user-friendly medical instruments for medical diagnostic of the future.

Plant Nanobionic Sensors for Arsenic Detection

Arsenic is a highly toxic heavy-metal pollutant which poses a significant health risk to humans and other ecosystems. In this work, the natural ability of wild-type plants to pre-concentrate and extract arsenic from the belowground environment is exploited to engineer plant nanobionic sensors for real-time arsenic detection. Near-infrared fluorescent nanosensors are specifically designed for sensitive and selective detection of arsenite. These optical nanosensors are embedded in plant tissues to non-destructively access and monitor the internal dynamics of arsenic taken up by the plants via the roots. The integration of optical nanosensors with living plants enables the conversion of plants into self-powered autosamplers of arsenic from their environment. Arsenite detection is demonstrated with three different plant species as nanobionic sensors. Based on an experimentally validated kinetic model, the nanobionic sensor could detect 0.6 and 0.2 ppb levels of arsenic after 7 and 14 days respectively by exploiting the natural ability of Pteris cretica ferns to hyperaccumulate and tolerate exceptionally high level of arsenic. The sensor readout could also be interfaced with portable electronics at a standoff distance, potentially enabling applications in environmental monitoring and agronomic research.

Novel electrochemical sensing platform based on ion imprinted polymer with nanoporous gold for ultrasensitive and selective determination of As3

An electrochemical sensor has been developed based on ion imprinted polymer (IIP) and nanoporous gold (NPG) modified gold electrode (IIP/NPG/GE) for determination of arsenic ion (As³⁺) in different kinds of water. NPG with high conductivity, large specific surface area, and high biocompatibility was prepared by a green electrodeposition method. Then a layer of IIP was synthesized in situ on NPG surface by electropolymerization, in which As³⁺ was used as template ion and o-phenylenediamine as functional monomer. We used potassium ferricyanide and potassium ferrocyanide chelates as electrochemical probes to generate signals. The electrochemical behavior of IIP/NPG/GE (vs. Ag/AgCl) was studied by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The linear range for As³⁺ was 2.0 × 10^-11 to 9.0 × 10^-9 M, and the lower detection limit was 7.1 × 10^-12 M (S/N = 3). This newly developed sensor has good stability and selectivity, and has been successfully applied to the As³⁺ determination of four kinds of water quality.

Design of Fluorescence-Enhanced Silver Nanoisland Chips for High-Throughput and Rapid Arsenite Assay

High-throughput and rapid arsenite (As(III)) monitoring is an urgent task to deal with the critical threat from As(III) contamination in the environment. In this study, an effective, portable, and sensitive As(III) assay was developed using the plasmonic silver (pAg) chips for As(III) detection. The pAg chips were fabricated by a simple seed-mediated method to grow the silver nanoisland films (Ag-NIFs) with the compact nanoislands and adjustable interisland gaps on the large-sized substrates. With appropriate surface functionalization and optimal chip manufacturing, Cy7.5 fluorescence dye can be immobilized on the surface of Ag-NIFs in the presence of As(III) to output the enhanced fluorescence signals up to 10-fold and improve the detection limit of As(III) less than 10 ppb. According to our results, the high-throughput detection measurements and wide dynamic range over 4 orders of magnitude implied the broad prospects of pAg chips in fluorescence-enhanced assays. The proposed As(III) assay has shown great opportunities for the practical application of ultratrace As(III) monitoring.

A competitive coordination-based immobilization-free electrochemical biosensor for highly sensitive detection of arsenic(v) using a CeO2-DNA nanoprobe

We developed a competitive coordination-based immobilization-free electrochemical biosensor for highly sensitive and selective detection of arsenic(v) using a CeO₂-DNA nanoprobe, which effectively circumvented complicated modification procedures and successfully achieved arsenic(v) determination in natural water samples.

A Schiff base modified graphene oxide film for anodic stripping voltammetric determination of arsenite

A protocol is described for chemical modification of graphene oxide with a Schiff base derived from diethylenetriamine and 2-hydroxy-4-methoxybenzophenone. The base was grafted onto an indium tin oxide (ITO) film and applied to electroanalytical determination of arsenite. Successful grafting was confirmed by Fourier transform-infrared spectroscopy, spectrophotometry, field emission scanning electron microscopy and cyclic voltammetry. Secondly, the coated ITO film served as a working electrode for the stripping voltammetric determination of arsenite. The analytical signal is generated by selective oxidation of metal species via multi-donor sites present in the derivatized Schiff base. The electroanalytical protocol was optimized by investigating the effects of deposition time, working potential, frequency and amplitude of square wave anodic stripping voltammetry. The method has attractive features including (a) the usage of a non-metallic, non-toxic and cost-effective material; (b) improved sensitivity (with limit of detection as low as 156 pM) due to better adsorption of arsenite in the Schiff base pockets on the ITO, and (c) the application to the determination of arsenite in real samples. Graphical abstract Schematic representation of the fabrication of a Schiff base-functionalized graphene oxide on an indium tin oxide (SB@SiO2@GO@ITO) electrode for selective electrochemical sensing of arsenite due to adsorption on multi-donor sites.

What Electrochemical Biosensors Can Do for Forensic Science? Unique Features and Applications

This article critically discusses the latest advances in the use of voltammetric, amperometric, potentiometric, and impedimetric biosensors for forensic analysis. Highlighted examples that show the advantages of these tools to develop methods capable of detecting very small concentrations of analytes and provide selective determinations through analytical responses, without significant interferences from other components of the samples, are presented and discussed, thus stressing the great versatility and utility of electrochemical biosensors in this growing research field. To illustrate this, the determination of substances with forensic relevance by using electrochemical biosensors reported in the last five years (2015–2019) are reviewed. The different configurations of enzyme or affinity biosensors used to solve analytical problems related to forensic practice, with special attention to applications in complex samples, are considered. Main prospects, challenges to focus, such as the fabrication of devices for rapid analysis of target analytes directly on-site at the crime scene, or their widespread use and successful applications to complex samples of interest in forensic analysis, and future efforts, are also briefly discussed.

Calix[4]arene Derivative-Modified Glassy Carbon Electrode: A New Sensing Platform for Rapid, Simultaneous, and Picomolar Detection of Zn(II), Pb(II), As(III), and Hg(II)

The glassy carbon electrode was fabricated with multifunctional bis-triazole-appended calix[4]arene and then used for the simultaneous detection of Zn(II), Pb(II), As(III), and Hg(II). Before applying the square-wave anodic stripping voltammetry, the sensitivity and precision of the modified electrode was assured by optimizing various conditions such as the modifier concentration, pH of the solution, deposition potential, accumulation time, and supporting electrolytes. The modified glassy carbon electrode was found to be responsive up to picomolar limits for the aforementioned heavy metal ions, which is a concentration limit much lower than the threshold level permitted by the World Health Organization. Importantly, the designed sensing platform showed anti-interference ability, good stability, repeatability, reproducibility, and applicability for the detection of multiple metal ions. The detection limits obtained for Zn(II), Pb(II), As(III), and Hg(II) are 66.3, 14.6, 71.9, and 28.9 pM, respectively.

Nanomaterial-based aptamer sensors for arsenic detection

Arsenic (As) is a highly toxic contaminant in the environment and a serious carcinogen for the human being. The toxicity of arsenic significantly threatens environmental and human health. The effective removing technology for arsenic remains challenging, and one of the reasons is due to the lack of powerful detection method in the complex environmental matrix. There is thus an urgent need to develop novel analytical methods for arsenic, preferably with the potential for the field-testing. To combat arsenic pollution and maintain a healthy environment and eco-system, many analytical methods have been developed for arsenic detection in various samples. Among these strategies, biosensors hold great promise for rapid detection of arsenic, in particular, nanomaterials-based aptamer sensors have attracted significant attention due to their simplicity, high sensitivity and rapidness. In this paper, we reviewed the recent development and applications of aptamer sensors (aptasensors) based-on nanomaterial for arsenic detection, in particular with emphasis on the works using optical and electrochemical technologies. We also discussed the recent novel technology in aptasensors development for arsenic detection, including nucleic acid amplification for signal enhancement and device integration for the portability of arsenic sensors. We are hoping this review could inspire further researches in developing novel nanotechnologies based aptasensors for possible on-site detection of arsenic.

Development of Novel and Highly Specific ssDNA-Aptamer-Based Electrochemical Biosensor for Rapid Detection of Mercury (II) and Lead (II) Ions in Water

In this work, we report on the development of an electrochemical biosensor for high selectivity and rapid detection of Hg2+ and Pb2+ ions using DNA-based specific aptamer probes labeled with ferrocene (or methylene blue) and thiol groups at their 5′ and 3′ termini, respectively. Aptamers were immobilized onto the surface of screen-printed gold electrodes via the SH (thiol) groups, and then cyclic voltammetry and impedance spectra measurements were performed in buffer solutions with the addition of HgCl2 and PbCl2 salts at different concentrations. Changes in 3D conformation of aptamers, caused by binding their respective targets, e.g., Hg2+ and Pb2+ ions, were accompanied by an increase in the electron transfer between the redox label and the electrode. Accordingly, the presence of the above ions can be detected electrochemically. The detection of Hg2+ and Pb2+ ions in a wide range of concentrations as low as 0.1 ng/mL (or 0.1 ppb) was achieved. The study of the kinetics of aptamer/heavy metal ions binding gave the values of the affinity constants of approximately 9.10−7 mol, which proved the high specificity of the aptamers used.

Development of a simple analytical method to determine arsenite using a DNA aptamer and gold nanoparticles

A simple analytical method was developed to determine the arsenite (As(III)) concentration using a DNA aptamer and gold nanoparticles (AuNPs). Prior to sample measurements, the method sensing mechanism was confirmed by analyzing the particle size of the AuNPs at each step of the analysis procedure, and the key operational parameters that affect the method performance were optimized. The optimal final NaCl concentration, incubation time with NaCl and pH of a 3-(N-morpholino) propanesulfonic acid buffer were 60 mM, 10 min and 7.3, respectively. A calibration curve was created under optimized operational conditions. The calibration curve was linear from a 1.0- to 10-μM As(III) concentration. The detection limit was 2.1 μM (161 μg/L). Using the calibration curve, we evaluated groundwater samples spiked with As(III). As(III) concentrations in groundwater pretreated with a 0.2-μm-pore-size membrane filter and cation-exchange resin were determined by using the method, which suggests that the proposed method can be used to determine the As(III) concentration in groundwater.

Recent Advances in Aptamer Discovery and Applications

Aptamers are short, single-stranded DNA, RNA, or synthetic XNA molecules that can be developed with high affinity and specificity to interact with any desired targets. They have been widely used in facilitating discoveries in basic research, ensuring food safety and monitoring the environment. Furthermore, aptamers play promising roles as clinical diagnostics and therapeutic agents. This review provides update on the recent advances in this rapidly progressing field of research with particular emphasis on generation of aptamers and their applications in biosensing, biotechnology and medicine. The limitations and future directions of aptamers in target specific delivery and real-time detection are also discussed.

Novel chitosan-Nafion composite for fabrication of highly sensitive impedimetric and colorimetric As(III) aptasensor

In the present work, for the first time we takes the advantages of chitosan-Nafion (Chit-Naf) composite as a highly conductive surface platform and a novel CNT-based signal amplification strategy to develop a lable-free impedimetricaptamer-based sensor for highly sensitive detection of As(III). The electrochemical impedance spectroscopy (EIS) investigations surprisingly revealed that the glassy carbon electrode (GC) electrode modified with Chit-Naf composite had higher electron transfer kinetics compared the bare GC, GC/Naf and GC/Chit electrodes, which promises a great potential as an efficient platform in construction of biosensing assays. In this work, we employed a signal amplification strategy based on carbon nanotube-bovine serum albumin (CNT-BSA) hybrid system, by which sensitivity and detection limit of the aptasensor for the detection of As(III) were obtained to be 100.82 Ω nM^-1 and a of 74 pM, respectively. This protocol provided one of the lowest limits of detection for As(III) on aptamer-based electrodes recently described in the literature. Moreover, the change of the optical absorptive properties of CNTs upon biorecognition interactions provides a way to detect the biorecognition process and thus allowed us to design an optical As(III) aptasensor using the UV-Vis spectroscopic method. The discrimination capability of the fabricated aptasensor for recognizing As(III) in the presence of other metal ions and a complex matrix of waste water samples was successfully investigated. This protocol provided a new method for sensitive detection of As(III) with considerable advantages in terms of reproducibility, selectivity, being mediator free and regenerability of the sensing interface.

Electrochemical aptamer-based sensors for food and water analysis: A review

Global food and water safety issues have prompted the development of highly sensitive, specific, and fast analytical techniques for food and water analysis. The electrochemical aptamer-based detection platform (E-aptasensor) is one of the more promising detection techniques because of its unique combination of advantages that renders these sensors ideal for detection of a wide range of target analytes. Recent research results have further demonstrated that this technique has potential for real world analysis of food and water contaminants. This review summaries the recently developed E-aptasensors for detection of analytes related to food and water safety, including bacteria, mycotoxins, algal toxins, viruses, drugs, pesticides, and metal ions. Ten different electroanalytical techniques and one opto-electroanalytical technique commonly employed with these sensors are also described. In addition to highlighting several novel sensor designs, this review also describes the strengths, limitations, and current challenges this technology faces, and future development trend.

A novel aptasensor based on 3D-reduced graphene oxide modified gold nanoparticles for determination of arsenite

In this study, a sensitive aptasensor based on three-dimensional reduced graphene oxide-modified gold nanoparticles (3D-rGO/AuNPs) was fabricated for the determination of arsenite (As(III)). The 3D-rGO/AuNPs was fully characterized with various techniques. The 5'-thiolate aptamer was first self-assembled on a glassy carbon electrode (GCE) that it's modified with 3D-rGO/AuNPs via Au-S covalent bonding. In the presence of As(III), the G-quadruplex interaction was formed between a single-stranded DNA and the target, which produced a hindrance for electron transfer. Consequently, the electrochemical impedance spectroscopy signals of a GCE modified with 3D-rGO/AuNPs was increased. In order to improve the response of the designing aptasensor, the effect of the various parameters was optimized. Under the optimal conditions, the aptasensor has an extraordinarily low detection limit of 1.4 × 10^-7 ng mL^-1 toward As(III) with a dynamic range of 3.8 × 10^-7 3.0 × 10^-4 ng mL^-1. The 3D-rGO/AuNPs aptasensor displayed superior selectivity and reproducibility with an acceptable recovery for determination of As(III) in real water samples.

Ultrasensitive aptamer biosensor for arsenic (III) detection based on label-free triple-helix molecular switch and fluorescence sensing platform

Arsenic ion is a well-known harmful heavy element widely existing in the environment. Arsenic pollution occurring frequently has become increasing a serious worldwide threat to human health and the environment. The development of sensitive and reliable methods to detect As³⁺ in water is of great importance to biochemical research and monitoring applications. Herein, a label-free fluorescence sensing platform was elaborately designed for As³⁺ monitoring using exonuclease III (Exo III)-assisted cascade target recycling amplification strategy. The triple-helix molecular switch was employed as the sensing element and 2-amino-5,6,7-trimethyl-1,8-naphthyridine was used as the signal indicator. The resulting biosensor is simple, ultrasensitive, and exhibits a limit of detection of 5 ng/L with high selectivity. Meanwhile, the proposed sensor is successfully applied to determination of As³⁺ in practical sample analysis (tap water, lake water and pond water). The results shown herein have important implications in the development of new fluorescent sensors for the fast, easy, and selective detection and quantification of As³⁺ in water samples. More importantly, the proposed platform can be extended to detect other heavy metal ions with newly designed triple-helix molecular switch, as well as pesticide residue, antibiotic residues, and biomarkers by using aptamer sequences.

Electrochemical Aptasensors for Food and Environmental Safeguarding: A Review

Food and environmental monitoring is one of the most important aspects of dealing with recent threats to human well-being and ecosystems. In this framework, electrochemical aptamer-based sensors are resilient due to their ability to resolve food and environmental contamination. An aptamer-based sensor is a compact analytical device combining an aptamer as the bio-sensing element integrated on the transducer surface. Aptamers display many advantages as biorecognition elements in sensor development when compared to affinity-based (antibodies) sensors. Aptasensors are small, chemically unchanging, and inexpensive. Moreover, they offer extraordinary elasticity and expediency in the design of their assemblies, which has led to innovative sensors that show tremendous sensitivity and selectivity. This review will emphasize recent food and environmental safeguarding using aptasensors; there are good prospects for their performance as a supplement to classical techniques.

Aptamer-Based Impedimetric Assay of Arsenite in Water: Interfacial Properties and Performance

In this work, we explore the use of electrochemical methods (i.e., impedance) along with the arsenic-specific aptamer (ArsSApt) to fabricate and study the interfacial properties of an arsenic (As(III)) sensor. The ArsSApt layer was self-assembled on a gold substrate, and upon binding of As(III), a detectable change in the impedimetric signal was recorded because of conformational changes at the interfacial layer. These interfacial changes are linearly correlated with the concentration of arsenic present in the system. This target-induced signal was utilized for the selective detection of As(III) with a linear dynamic range of 0.05-10 ppm and minimum detectable concentrations of ca. 0.8 μM. The proposed system proved to be successful mainly because of the combination of a highly sensitive electrochemical platform and the recognized specificity of the ArsSApt toward its target molecule. Also, the interaction between the ArsSApt and the target molecule (i.e., arsenic) was explored in depth. The obtained results in this work are aimed at proving the development of a simple and environmentally benign sensor for the detection of As(III) as well as in elucidating the possible interactions between the ArsSApt and arsenic molecules.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.