Biomimetic self-templating optical structures fabricated by genetically engineered M13 bacteriophage

Self-assembly of isolated plasmonic dimers with sub-5 nm gaps on a metallic mirror

Realizing plasmonic nanogaps with a refractive index (n = 1) environment in metallic nanoparticle (NP) structures is highly attractive for a wide range of applications. So far in self-assembly-based approaches, without surface functionalization of metallic NPs, achieving such extremely small nanogaps is challenging. Surface functionalization introduces changes in the refractive index at nanogaps, which in turn deteriorates the desired plasmonic properties. In addition, fabrication of low-density dimer NP designs with smaller nanogaps poses a big challenge. Here, we introduce a simple and straightforward self-assembly-based strategy for the fabrication of low-density, isolated dimer gold nanoparticles in a nano-particle-on-metallic-mirror (NPoM) platform. A minimum interparticle gap distance between NPs of ∼3 nm is achieved without surface functionalization. This is possible by utilizing the M13 bacteriophage as the spacer layer instead of SiO2 in NPoM. Density functional theory calculations on Au atom adsorption on SiO2 and M13 bacteriophage surface constituents trace the NP assembly on the latter to a comparatively weak interaction with the substrate. Our study offers an attractive route for fabricating low density plasmonic dimer structures featuring small nanogaps and will enrich structure specific/isolated studies benefitting a variety of optical, actuator, and sensing applications.

Sensing the Future-Frontiers in Biosensors: Exploring Classifications, Principles, and Recent Advances

Biosensors are transforming healthcare by delivering swift, precise, and economical diagnostic solutions. These analytical instruments combine biological indicators with physical transducers to identify and quantify biomarkers, thereby improving illness detection, management, and patient surveillance. Biosensors are widely utilized in healthcare for the diagnosis of chronic and infectious diseases, tailored treatment, and real-time health monitoring. This thorough overview examines several categories of biosensors and their uses in the detection of numerous biomarkers, including glucose, proteins, nucleic acids, and infections. Biosensors are commonly classified based on the type of transducer employed or the specific biorecognition element utilized. This review introduces a novel classification based on substrate morphology, offering a comprehensive perspective on biosensor categorization. Considerable emphasis is placed on the advancement of point-of-care biosensors, facilitating decentralized diagnostics and alleviating the strain on centralized healthcare systems. Recent advancements in nanotechnology have significantly improved the sensitivity, selectivity, and downsizing of biosensors, rendering them more efficient and accessible. The study examines problems such as stability, reproducibility, and regulatory approval that must be addressed to enable the widespread implementation of biosensors in clinical environments. The study examines the amalgamation of biosensors with wearable devices and smartphones, emphasizing the prospects for ongoing health surveillance and individualized medical care. This viewpoint clarifies the distinct types of biosensors and their particular roles, together with recent developments in the "smart biosensor" sector, facilitated by artificial intelligence and the Internet of Medical Things (IoMT). This novel approach seeks to deliver a comprehensive evaluation of the present condition of biosensor technology in healthcare, recent developments, and prospective paths, emphasizing their significance in influencing the future of medical diagnostics and patient care.

Virus-Based Pyroelectricity

The first observation of heat-induced electrical potential generation on a virus and its detection through pyroelectricity are presented. Specifically, the authors investigate the pyroelectric properties of the M13 phage, which possesses inherent dipole structures derived from the noncentrosymmetric arrangement of the major coat protein (pVIII) with an α-helical conformation. Unidirectional polarization of the phage is achieved through genetic engineering of the tail protein (pIII) and template-assisted self-assembly techniques. By modifying the pVIII proteins with varying numbers of glutamate residues, the structure-dependent tunable pyroelectric properties of the phage are explored. The most polarized phage exhibits a pyroelectric coefficient of 0.13 µC m-2 °C-1 . Computational modeling and circular dichroism (CD) spectroscopy analysis confirm that the unfolding of α-helices within the pVIII proteins leads to changes in phage polarization upon heating. Moreover, the phage is genetically modified to enable its pyroelectric function in diverse chemical environments. This phage-based approach not only provides valuable insights into bio-pyroelectricity but also opens up new opportunities for the detection of various viral particles. Furthermore, it holds great potential for the development of novel biomaterials for future applications in biosensors and bioelectric materials.

M13 phage: a versatile building block for a highly specific analysis platform

Viruses are changing the biosensing and biomedicine landscape due to their multivalency, orthogonal reactivities, and responsiveness to genetic modifications. As the most extensively studied phage model for constructing a phage display library, M13 phage has received much research attention as building blocks or viral scaffolds for various applications including isolation/separation, sensing/probing, and in vivo imaging. Through genetic engineering and chemical modification, M13 phages can be functionalized into a multifunctional analysis platform with various functional regions conducting their functionality without mutual disturbance. Its unique filamentous morphology and flexibility also promoted the analytical performance in terms of target affinity and signal amplification. In this review, we mainly focused on the application of M13 phage in the analytical field and the benefit it brings. We also introduced several genetic engineering and chemical modification approaches for endowing M13 with various functionalities, and summarized some representative applications using M13 phages to construct isolation sorbents, biosensors, cell imaging probes, and immunoassays. Finally, current issues and challenges remaining in this field were discussed and future perspectives were also proposed.

Neural mechanism mimetic selective electronic nose based on programmed M13 bacteriophage

The electronic nose is a reliable practical sensor device that mimics olfactory organs. Although numerous studies have demonstrated excellence in detecting various target substances with the help of ideal models, biomimetic approaches still suffer in practical realization because of the inability to mimic the signal processing performed by olfactory neural systems. Herein, we propose an electronic nose based on the programable surface chemistry of M13 bacteriophage, inspired by the neural mechanism of the mammalian olfactory system. The neural pattern separation (NPS) was devised to apply the pattern separation that operates in the memory and learning process of the brain to the electronic nose. We demonstrate an electronic nose in a portable device form, distinguishing polycyclic aromatic compounds (harmful in living environment) in an atomic-level resolution (97.5% selectivity rate) for the first time. Our results provide practical methodology and inspiration for the second-generation electronic nose development toward the performance of detection dogs (K9).

Strategies for Surface Immobilization of Whole Bacteriophages: A Review

Bacteriophage immobilization is a key unit operation in emerging biotechnologies, enabling new possibilities for biodetection of pathogenic microbes at low concentration, production of materials with novel antimicrobial properties, and fundamental research on bacteriophages themselves. Wild type bacteriophages exhibit extreme binding specificity for a single species, and often for a particular subspecies, of bacteria. Since their specificity originates in epitope recognition by capsid proteins, which can be altered by chemical or genetic modification, their binding specificity may also be redirected toward arbitrary substrates and/or a variety of analytes in addition to bacteria. The immobilization of bacteriophages on planar and particulate substrates is thus an area of active and increasing scientific interest. This review assembles the knowledge gained so far in the immobilization of whole phage particles, summarizing the main chemistries, and presenting the current state-of-the-art both for an audience well-versed in bioconjugation methods as well as for those who are new to the field.

Phage-Based Sensors in Medicine: A Review

Bacteriophages are interesting entities on the border of biology and chemistry. In nature, they are bacteria parasites, while, after genetic manipulation, they gain new properties, e.g., selectively binding proteins. Owing to this, they may be applied as recognition elements in biosensors. Combining bacteriophages with different transducers can then result in the development of innovative sensor designs that may revolutionize bioanalytics and improve the quality of medical services. Therefore, here, we review the use of bacteriophages, or peptides from bacteriophages, as new sensing elements for the recognition of biomarkers and the construction of the highly effective diagnostics tools.

Experimental and numerical evaluation of a genetically engineered M13 bacteriophage with high sensitivity and selectivity for 2,4,6-trinitrotoluene

Selective and sensitive detection of desired targets is very critical in sensor design. Here, we report a genetically engineered M13 bacteriophage-based sensor system evaluated by quantum mechanics (QM) calculations. Phage display is a facile way to develop the desired peptide sequences, but the resulting sequences can be imperfect peptides for binding of target molecules. A TNT binding peptide (WHW) carrying phage was self-assembled to fabricate thin films and tested for the sensitive and selective surface plasmon resonance-based detection of TNT molecules at the 500 femtomole level. SPR studies performed with the WHW peptide and control peptides (WAW, WHA, AHW) were well-matched with those of the QM calculations. Our combined method between phage engineering and QM calculation will significantly enhance our ability to design selective and sensitive sensors.

Electrocoiling-guided printing of multiscale architectures at single-wavelength resolution

The rope coiling observed in liquid ink with high viscosity has been exploited in additive printing to fabricate architectures with periodically curled structures and tune their mechanical properties. However, the control over the coiling path relying on mechanical motion restricts the spatiotemporal resolution. We develop an electrically assisted high-resolution technique to manipulate coiling paths of viscous ink and structures of the deposited filament. By spatially programming the voltage applied onto the viscous ink, we show that the switching between different filament structures can be accomplished at single wavelength resolution, facilitating the rapid and accurate construction of sophisticated patterns. Furthermore, translational guiding of the electrocoiling enables rapid printing of filaments with complex structures at a line speed of 10² mm s^-1. With a simplified trajectory of the printing head, large-area and multiscale patterns can be printed at an unprecedented speed; for instance, centimeter-sized architectures constructed from nanofibers with micron-sized curled structures can be completed in a few minutes. By enabling the printing of complex fiber networks with tunable shape and density, our work provides a route towards custom-design of fiber architectures with unique features such as spatially varying mechanical properties.

Intermolecular distance measurement with TNT suppressor on the M13 bacteriophage-based Förster resonance energy transfer system

An M13 bacteriophage-based Förster resonance energy transfer (FRET) system is developed to estimate intermolecular distance at the nanoscale using a complex of CdSSe/ZnS nanocrystal quantum dots, genetically engineered M13 bacteriophages labeled with fluorescein isothiocyanate and trinitrotoluene (TNT) as an inhibitor. In the absence of trinitrotoluene, it is observed that a significant spectral shift from blue to green occur, which represents efficient energy transfer through dipole-dipole coupling between donor and acceptor, or FRET-on mode. On the other hand, in the presence of trinitrotoluene, the energy transfer is suppressed, since the donor-to-acceptor intermolecular distance is detuned by the specific capturing of TNT by the M13 bacteriophage, denoted as FRET-off mode. These noble features are confirmed by changes in the fluorescence intensity and the fluorescence decay curve. TNT addition to our system results in reducing the total energy transfer efficiency considerably from 16.1% to 7.6% compared to that in the non-TNT condition, while the exciton decay rate is significantly enhanced. In particular, we confirm that the energy transfer efficiency satisfies the original intermolecular distance dependence of FRET. The relative donor-to-acceptor distance is changed from 70.03 Å to 80.61 Å by inclusion of TNT.

Miranda B, Lodoso-Torrecilla I, van Nisselroy CAJ, Hoogenberg BJ, Dantuma S, Hollmann F, de Vries JW, Warszawik EM, Fischer R, Commandeur U, van Rijn P. Biocatalytically induced surface modification of the tobacco mosaic virus and the bacteriophage M13

A one-step laccase induced free radical oxidation of the tobacco mosaic virus and bacteriophage M13 led to acrylate-functionalized viruses with customizable properties.

Self-Assembled Nanoporous Biofilms from Functionalized Nanofibrous M13 Bacteriophage

Highly periodic and uniform nanostructures, based on a genetically engineered M13 bacteriophage, displayed unique properties at the nanoscale that have the potential for a variety of applications. In this work, we report a multilayer biofilm with self-assembled nanoporous surfaces involving a nanofiber-like genetically engineered 4E-type M13 bacteriophage, which was fabricated using a simple pulling method. The nanoporous surfaces were effectively formed by using the networking-like structural layers of the M13 bacteriophage during self-assembly. Therefore, an external template was not required. The actual M13 bacteriophage-based fabricated multilayered biofilm with porous nanostructures agreed well with experimental and simulation results. Pores formed in the final layer had a diameter of about 150–500 nm and a depth of about 15–30 nm. We outline a filter application for this multilayered biofilm that enables selected ions to be extracted from a sodium chloride solution. Here, we describe a simple, environmentally friendly, and inexpensive fabrication approach with large-scale production potential. The technique and the multi-layered biofilms produced may be applied to sensor, filter, plasmonics, and bio-mimetic fields.

A Localized Surface Plasmon Resonance Sensor Using Double-Metal-Complex Nanostructures and a Review of Recent Approaches

From active developments and applications of various devices to acquire outside and inside information and to operate based on feedback from that information, the sensor market is growing rapidly. In accordance to this trend, the surface plasmon resonance (SPR) sensor, an optical sensor, has been actively developed for high-sensitivity real-time detection. In this study, the fundamentals of SPR sensors and recent approaches for enhancing sensing performance are reported. In the section on the fundamentals of SPR sensors, a brief description of surface plasmon phenomena, SPR, SPR-based sensing applications, and several configuration types of SPR sensors are introduced. In addition, advanced nanotechnology- and nanofabrication-based techniques for improving the sensing performance of SPR sensors are proposed: (1) localized SPR (LSPR) using nanostructures or nanoparticles; (2) long-range SPR (LRSPR); and (3) double-metal-layer SPR sensors for additional performance improvements. Consequently, a high-sensitivity, high-biocompatibility SPR sensor method is suggested. Moreover, we briefly describe issues (miniaturization and communication technology integration) for future SPR sensors.

Rod-Like Virus-Based Multiarm Colloidal Molecules

We report on the construction of multiarm colloidal molecules by tip-linking filamentous bacteriophages, functionalized either by biological engineering or chemical conjugation. The affinity for streptavidin of a genetically modified vector phage displaying Strep-tags fused to one end of the viral particle is measured by determining the dissociation constant, K_d. In order to improve both the colloidal stability and the efficiency of the self-assembly process, a biotinylation protocol having a chemical yield higher than 90% is presented to regioselectively functionalize the cystein residues located at one end of the bacteriophages. For both viral systems, a theoretical comparison is performed by developing a quantitative model of the self-assembly and interaction of the modified viruses with streptavidin compounds, which accurately accounts for our experimental results. Multiarm colloidal structures of different valencies are then produced by conjugation of these tip-functionalized viruses with streptavidin activated nanoparticles. We succeed to form stable virus-based colloidal molecules, whose number of arms, called valency, is solely controlled by tuning the molar excess. Thanks to a fluorescent labeling of the viral arms, the dynamics of such systems is also presented in real time by fluorescence microscopy.

Surface Plasmon Resonance: A Boon for Viral Diagnostics

Rapidly evolving viral strains leading to epidemics and pandemics necessitates quick diagnostics and treatment to halt the progressive march of the disease. Optical biosensors like surface plasmon resonance (SPR) have emerged in recent times as a most reliable diagnostic device owing to their portability, reproducibility, sensitivity and specificity. SPR analyzes the kinetics of biomolecular interactions in a label-free manner. It has surpassed the conventional virus detection methods in its utility, particularly in medical diagnostics and healthcare. However, the requirement of high-end infrastructure setup and trained manpower are some of the roadblocks in realizing the true potential of SPR. This platform needs further improvisation in terms of simplicity, affordability and portability before it could be utilized in need-based remote areas of under-developed and developing countries with limited infrastructure.

Recent advances in M13 bacteriophage-based optical sensing applications

Recently, M13 bacteriophage has started to be widely used as a functional nanomaterial for various electrical, chemical, or optical applications, such as battery components, photovoltaic cells, sensors, and optics. In addition, the use of M13 bacteriophage has expanded into novel research, such as exciton transporting. In these applications, the versatility of M13 phage is a result of its nontoxic, self-assembling, and specific binding properties. For these reasons, M13 phage is the most powerful candidate as a receptor for transducing chemical or optical phenomena of various analytes into electrical or optical signal. In this review, we will overview the recent progress in optical sensing applications of M13 phage. The structural and functional characters of M13 phage will be described and the recent results in optical sensing application using fluorescence, surface plasmon resonance, Förster resonance energy transfer, and surface enhanced Raman scattering will be outlined.