Visible-light driven label-free photoelectrochemical immunosensor based on TiO2/S-BiVO4@Ag2S nanocomposites for sensitive detection OTA

A novel aptamer-based photoelectrochemical sensor for zearalenone detection: Integration of g-C3N4/BiOBr with in situ growth Ag2S quantum dots

Zearalenone (ZEN), a secondary metabolite mycotoxin primarily synthesized by Fusarium species and prevalent in cereal grains, exerts estrogenic effects that could induce reproductive toxicity and teratogenic outcomes. To enhance the precision of ZEN detection, we have developed an innovative photoelectrochemical (PEC) aptamer-based sensor employing in situ growth silver sulfide (Ag2S) quantum dots-sensitized graphitic carbon nitride/bismuth oxybromide (g-C3N4/BiOBr) heterojunction. The g-C3N4/BiOBr composite exhibits robust structural stability and straightforward synthesis. In situ growth Ag2S quantum dots could significantly amplify the signal, thereby elevating the sensor's sensitivity. The sensor utilizes ZEN-specific aptamers for target-specific binding, ensuring high selectivity. Within the concentration range of 0.001 to 100 ng·mL-1, the photocurrent response demonstrated a significant linear correlation with the logarithmic scale of ZEN concentration, with a detection limit reaching 0.122 pg·mL-1. This PEC aptamer sensor exhibits excellent stability, reproducibility, and selectivity, which is expected to be used as an effective analytical tool for ZEN detection in practical applications.

Bi2S3/BiOCl heterojunction-based photoelectrochemical aptasensor for ultrasensitive assay of fumonisin B1 via signal amplification with in situ grown Ag2S quantum dots

Fumonisin B1 (FB1) is a mycotoxin mainly found in corn, peanuts, and wheat crops, which affects human health. Based on bismuth sulfide/bismuth oxychloride (Bi2S3/BiOCl) composite material, silver sulfide (Ag2S) was grown in situ as a quantum dot sensitization signal, and a photoelectrochemical (PEC) aptasensor was designed by layer upon layer modification to detect FB1. Bi2S3/BiOCl has a wide range of visible light absorption, stable chemical properties, and a simple synthesis method. In the construction process, L-ascorbic acid (AA) is selected to provide electrons and inhibit photogenerated electron-hole (e-/h+) recombination. Under the optimal experimental conditions, the detection range of the fabricated PEC aptasensor was 0.001 ~ 100 ng/mL, and the detection limit was 0.016 pg/mL. The prepared PEC aptasensor has high sensitivity, stability, and reproducibility. The combination of aptamer and PEC sensor provides a novel method for the application of PEC sensor in mycotoxin detection.

Recent Progress in Photoelectrochemical Sensing of Pesticides in Food and Environmental Samples: Photoactive Materials and Signaling Mechanisms

Pesticides have become an integral part of modern agricultural practices, but their widespread use poses a significant threat to human health. As such, there is a pressing need to develop effective methods for detecting pesticides in food and environmental samples. Traditional chromatography methods and common rapid detection methods cannot satisfy accuracy, portability, long storage time, and solution stability at the same time. In recent years, photoelectrochemical (PEC) sensing technology has gained attention as a promising approach for detecting various pesticides due to its salient advantages, including high sensitivity, low cost, simple operation, fast response, and easy miniaturization, thus becoming a competitive candidate for real-time and on-site monitoring of pesticide levels. This review provides an overview of the recent advancements in PEC methods for pesticide detection and their applications in ensuring food and environmental safety, with a focus on the categories of photoactive materials, from single semiconductor to semiconductor-semiconductor heterojunction, and signaling mechanisms of PEC sensing platforms, including oxidation of pesticides, steric hindrance, generation/decrease in sacrificial agents, and introduction/release of photoactive materials. Additionally, this review will offer insights into future prospects and confrontations, thereby contributing novel perspectives to this evolving domain.

CRISPR/Cas12a-Derived Photoelectrochemical Aptasensor Based on Au Nanoparticle-Attached CdS/UiO-66-NH2 Heterostructures for the Rapid and Sensitive Detection of Ochratoxin A

The sensitive and accurate detection of ochratoxin A (OTA) is crucial for public health due to its high toxicity. Herein, using Au nanoparticle (NP)-attached CdS/UiO-66-NH2 heterostructures as photoactive materials, a photoelectrochemical (PEC) aptasensor was presented for the ultrasensitive assay of OTA based on a competitive displacement reaction triggering the trans-cleavage ability of CRISPR/Cas12a. In this sensing strategy, methylene blue-labeled single-stranded DNA (MB-ssDNA) was immobilized on the Au NPs/CdS/UiO-66-NH2 electrode to accelerate the separation of the photogenerated carrier, thus producing a significantly increased PEC response. In the presence of OTA, it specifically bound with the aptamer (Apt) and resulted in the release of the activation chain, triggering the trans-cleavage characteristics of CRISPR/Cas12a. MB-ssDNA was cut randomly on the electrode surface to convert the PEC signal from the "on" to the "off" state, thereby achieving a quantitative and accurate detection of OTA. The CRISPR/Cas12a-derived PEC aptasensor exhibited excellent sensitivity and specificity, with a linear range from 100 to 50 ng/mL and a detection limit of 38 fg/mL. Overall, the proposed aptasensor could provide a rapid, accurate, and sensitive method for the determination of OTA in actual samples.

Strategies to control mycotoxins and toxigenic fungi contamination by nano-semiconductor in food and agro-food: a review

Mycotoxins are toxic secondary metabolites generated from toxigenic fungi in the contaminated food and agro-food, which have been regarded as a serious threat to the food safety and human health. Therefore, the control of mycotoxins and toxigenic fungi contamination is of great significance and has attracted the increasing attention of researchers. As we know, nano-semiconductors have many unique properties such as large surface area, structural stability, good biocompatibility, excellent photoelectrical properties, and low cost, which have been developed and applied in many research fields. Recently, nano-semiconductors have also been promisingly applied in mitigating or controlling mycotoxins and toxigenic fungi contaminations in food and agro-food. In this review, the type, occurrence, and toxicity of main mycotoxins in food and agro-food were introduced. Then, a variety of strategies to mitigate the mycotoxin contamination based on nano-semiconductors involving mycotoxins detection, inhibition of toxigenic fungi, and mycotoxins degradation were summarized. Finally, the outlook, opportunities, and challenges have prospected in the future for the mitigation of mycotoxins and toxigenic fungi based on nano-semiconductors.

Exogenous interference and autofluorescence-free ratiometric aptasensor for detection of OTA based on dual-colored persistent luminescence nanoparticles

Accurate and sensitive detection of ochratoxin A (OTA) is highly necessary due to its high carcinogenicity, teratogenicity and mutagenicity. Herein, we reported an exogenous interference and autofluorescence-free ratiometric aptasensor based on dual-colored persistent luminescent nanoparticles for precise detection of OTA. Green-emitting ZnGeO:Mn bonded with OTA aptamer and BHQ1-modified complementary base was acted as detection and specific recognition probe (ZGM@BHQ1). Quaternary ammonium modified ZnGaGeO:Cr with red emission was employed as reference probe and further bonded to ZGM@BHQ1 through electrostatic interaction to construct the ratiometric aptasensor. The developed ratiometric aptasensor was free from real-time excitation, external interference and autofluorescence and gave low detection limit of 3.4 pg mL^-1, wide linearity in the range of 0.01-50 ng mL^-1 and high precision of 3.1 % (11 replicate determinations, at 1 ng mL^-1 level). The applicability of the aptasensor was successfully demonstrated by analyzing OTA in in grain samples with recoveries of 97.6 %-105.2 %.

A sensitive label-free biosensor based on Ag2S-sensitived Bi2WO6/BiOBr heterojunction for photoelectrochemical immunoassay of prostate specific antigen

Prostate cancer is one of the most common cancers in the world, and its early diagnosis can effectively reduce mortality. A new label-free photoelectrochemical (PEC) immunosensor on the basis of Bi₂WO₆/BiOBr nanocomposite materials has been successfully prepared for the test of prostate-specific antigen (PSA) in human serum in this work. The Ag₂S-sensitized Bi₂WO₆/BiOBr heterojunction was used as a photosensitive material, which effectively improved the photocurrent response. On Bi₂WO₆/BiOBr surface, dopamine immobilized PSA antibody by self-polymerizing to form polydopamine membrane. Antigen and antibody are specifically combined to achieve quantitative detection of PSA according to the current changes at different concentrations of antigen. Under the optimal experimental conditions, the PEC immunosensor has an ideal linear relationship between 1 pg/mL - 50 ng/mL, and the detection limit is 0.084 pg/mL. In addition, the prepared immunosensor has good stability, reproducibility and selectivity, providing a new method for the detection of PSA in actual sample analysis.

Quantitative and qualitative analysis of ochratoxin-A using fluorescent CQDs@DNA-based nanoarchitecture assembly to monitor food safety and quality

Ochratoxin A (OTA), a mycotoxin formed by various fungi, such as Aspergillus and Penicillium species, is dangerous to human health. Thus, to circumvent the risk of OTA ingestion, the recognition and quantification of OTA levels are of great significance. A perusal of the literature has revealed that the integration of DNA/Carbon Quantum Dot (CQD)-based hybrid systems may exhibit the unique electronic and optical properties of nanomaterials/nanoarchitecture and consequent recognition properties. Herein, we developed the CQDs@DNA-based hybrid nanoarchitecture system for the selective detection of OTA, which exhibits modulation in the emission spectrum after interaction with OTA, with a significant binding constant (K_a = 3.5 × 10⁵ M^-1), a limit of detection of 14 nM, limit of quantification of 47 nM and working range of 1-10 μM. The mechanism for sensing the OTA has been corroborated using fluorescence, UV-visible absorption spectroscopy, and FTIR techniques, demonstrating the binding mode of CQD@DNA hybrid nano-architecture assembly with OTA. Further, we demonstrated the sensing ability of developed CQDs@DNA-based nanoarchitecture assembly towards the quantification of OTA in real food monitoring analysis for real-time applications, which makes this developed nanoarchitecture assembly the potential candidate to conveniently monitor food safety and quality for human health.

PEDOT/FeOOH/BiVO4 Nanohybrids with Excellent Photoelectric Performance Promoted by Photothermal Effects for the Ultrasensitive Detection of MicroRNA-375-3p

Herein, a novel photoactive poly(3,4-ethyl-enedioxythiophene) (PEDOT)/FeOOH/BiVO₄ nanohybrid with excellent photoelectrochemical (PEC) efficiency was assembled for the construction of an ultrasensitive biosensor for microRNA-375-3p (miRNA-375-3p) detection. In comparison with the traditional FeOOH/BiVO₄ photoactive composite, the PEDOT/FeOOH/BiVO₄ nanohybrids exhibited markedly enhanced photocurrent due to the promoted interfacial charge separation by PEDOT, which was used not only as an electron conductor but also as a localized photothermal heater to enhance the photogenerated carrier separation. Based on this PEDOT/FeOOH/BiVO₄ photoelectrode and an enzyme-free signal amplification strategy including a target-induced catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR), a PEC sensing platform for the detection of miRNA-375-3p was established, achieving a wide linear range from 1 fM to 10 pM with a low detection limit of 0.3 fM. Moreover, this work provides a general photocurrent enhancement strategy for the development of high-performing PEC biosensors for sensitive detection of biomarkers and early disease diagnosis.

Advances in immunoassay-based strategies for mycotoxin detection in food: From single-mode immunosensors to dual-mode immunosensors

Mycotoxin contamination in foods and other goods has become a broad issue owing to serious toxicity, tremendous threat to public safety, and terrible loss of resources. Herein, it is necessary to develop simple, sensitive, inexpensive, and rapid platforms for the detection of mycotoxins. Currently, the limitation of instrumental and chemical methods cannot be massively applied in practice. Immunoassays are considered one of the best candidates for toxin detection due to their simplicity, rapidness, and cost-effectiveness. Especially, the field of dual-mode immunosensors and corresponding assays is rapidly developing as an advanced and intersected technology. So, this review summarized the types and detection principles of single-mode immunosensors including optical and electrical immunosensors in recent years, then focused on developing dual-mode immunosensors including integrated immunosensors and combined immunosensors to detect mycotoxins, as well as the combination of dual-mode immunosensors with a portable device for point-of-care test. The remaining challenges were discussed with the aim of stimulating future development of dual-mode immunosensors to accelerate the transformation of scientific laboratory technologies into easy-to-operate and rapid detection platforms.

A novel photoelectrochemical immunosensor based on TiO2@Bi2WO6 hollow microspheres and Ag2S for sensitive detection of SARS-COV-2 nucleocapsid protein

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-COV-2) is a cluster of β coronaviruses. The 2019 coronavirus disease (COVID-19) caused by SARS-COV-2 is emerging as a global pandemic. Thus, early diagnosis of SARS-COV-2 is essential to prevent severe outbreaks of the disease. In this experiment, a novel label-free photoelectrochemical (PEC) immunosensor was obtained based on silver sulfide (Ag2S) sensitized titanium dioxide@bismuth tungstate (TiO2@Bi2WO6) nanocomposite for quantitative detection of SARS-COV-2 nucleocapsid protein. The constructed TiO2@Bi2WO6 hollow microspheres had large specific surface area and could produce high photocurrent intensity under visible light illumination. Ag2S was in-situ grown on the surface of thioglycolic acid (TGA) modified TiO2@Bi2WO6. In particular, TiO2@Bi2WO6 and Ag2S formed a good energy level match, which could effectively enhance the photocurrent conversion efficiency and strength the photocurrent response. Ascorbic acid (AA) acted as an effective electron donor to effectively eliminate photogenerated holes. Under optimal experimental conditions, the constructed immunosensor presented a supersensitive response to SARS-COV-2 nucleocapsid protein, with a desirable linear relationship ranged from 0.001 to 50 ng/mL for nucleocapsid protein and a lower detection limit of 0.38 pg/mL. The fabricated sensor exhibited a wide linear range, excellent selectivity, specificity and stability, which provided a valuable referential idea for the detection of SARS-COV-2.

Z-scheme Bi2O3/CuBi2O4 heterojunction enabled sensitive photoelectrochemical detection of aflatoxin B1 for health care, the environment, and food

Designing a photoelectrochemical (PEC) biosensor with preponderant sensitivity and anti-interference is a challenge for detecting small molecules in real samples with complex matrices. To this end, the Bi2O3/CuBi2O4 was synthesized in one step to enhance visible light's absorption ability, transferring the interfacial carrier's efficiency, a high-active Z-scheme heterojunction, and a photocathode biosensor was proposed. For the first time, we used the density functional theory to verify a Z-scheme transfer pathway of photogenerated electrons in Bi2O3/CuBi2O4 and the energy band structure of Bi2O3 and CuBi2O4, respectively. Bi2O3/CuBi2O4-based PEC biosensor was developed for competive immunoassay of small molecular, aflatoxin B1 (AFB1) as an example, resulting in a low detection limit of 297.4 fg/mL and a linear range of 1.4 pg/mL-280 ng/mL in urine, water, peanut, and wheat samples. Using spiked experiments, the satisfied repeatability, reproducibility, stability, and specificity of the Bi2O3/CuBi2O4-based PEC biosensor indicated a promise for application in health care, the environment, and food.

Construction of a photoelectrochemical immunosensor based on CuInS2 photocathode and BiVO4/BiOI/Ag2S photoanode and sensitive detection of NSE

In this paper, a photoelectrochemical (PEC) immunosensor was constructed to detect neuron-specific enolase (NSE) with ITO/BiVO₄/BiOI/Ag₂S as photoanode and ITO/CuInS₂ as photocathode. Due to its excellent photocurrent response, Ag₂S sensitized BiVO₄/BiOI composite was selected to provide stable photocurrent in place of the traditional Pt electrode. ITO/CuInS₂ electrode was used to immobilize biomolecules, which solved the deficiency of poor anti-interference ability of single photoanode. Under the optimal experimental conditions, the PEC immunosensor had outstanding linear relationship within the range of NSE concentration from 5 pg/mL-200 ng/mL, and the detection limit was 1.2 pg/mL. The constructed PEC immunosensor had two advantages. On the one hand, the PEC immunosensor was built on the photocathode, which had better anti-interference ability because of the separation of light capture and biomolecular recognition process. On the other hand, the introduction of photoanode increased the photocurrent response and reduced the detection limit of target antigen. The PEC immunosensor had good stability, reproducibility and specificity, and provided a broad prospect for the detection of other molecules.

Addressable Label-Free Photoelectric Sensor Array with Self-Calibration for Detection of Neuron Specific Enolase

An addressable label-free photoelectric immunosensor array was designed for detection of neuron specific enolase (NSE) based on TiO₂/CdS as substrate materials. In this work, the hydrothermal synthesized TiO₂ nanorod film is evenly grown on the surface of the fluorine-doped tin oxide (FTO), and then CdS with a narrow band gap is added for sensitization through successive ionic layer adsorption reactions. The obtained TiO₂/CdS composite materials with matched energy band structures promote the rapid electron transfer and effectively reduce the recombination of electron hole pairs, which greatly enhance the visible light absorption and increased photocurrent intensity. In order to construct a suitable sensor array, the sensitized FTO electrode is divided into multiple regions of equal size by insulating stickers, and then the addressable and continuous detection of multiple samples can be achieved. Because multiple detection regions are prepared and tested under the same conditions, the difference effectively reduces, and the sensor can realize self-calibration and obtain more accurate results. Under optimal conditions, this sensor array can detect NSE in the linear range of 0.01-100 ng mL^-1 with a detection limit of 2.49 pg mL^-1 (S/N = 3). The sensor array has good selectivity, stability, and reproducibility, making it a viable approach for real sample detection.

Toehold-Mediated Cascade Catalytic Assembly for Mycotoxin Detection and Its Logic Applications

In this work, an enzyme-free biosensor is reported for mycotoxin detection based on a toehold-mediated catalytic hairpin assembly (CHA) and a DNAzyme-cascaded hydrolysis reaction. In the presence of a mycotoxin, the recognition between an aptamer and the mycotoxin releases the trigger DNA. The trigger DNA initiates the toehold-mediated CHA, generating large amounts of partial duplex B/C with four toeholds, which can be used to assemble the DNAzyme-cascaded hydrolysis reaction. Furthermore, through a collaborative autoassembly reaction among the B/C duplex, DNA1, and DNA2, supramolecular nanostructures corresponding to Mg²⁺-dependent DNAzymes can be formed. With the incubation of Mg²⁺, the dual-modified (TAMRA/BHQ2) substrate strand DNA2 will be cleaved into two fragments, yielding a high TAMRA fluorescence signal for mycotoxin testing. Under optimal conditions, the sensing system was ultrasensitive and showed low detection limits of 0.2 pM for ochratoxin A (OTA), 0.13 pM for aflatoxin B1 (AFB1), and 0.17 pM for zearalenone (ZEN). The mycotoxin aptasensor also exhibited high selectivity and was successfully applied for the quantitative analysis of OTA, AFB1, and ZEN in wine samples. Due to the advantages of flexibility and versatility, this mycotoxin platform was used to fabricate several concatenated logic gates including "AND-INHIBIT", "INHIBIT-OR", "OR-AND", and "OR-INHIBIT" logic biocomputings. Such multiple functions of the logic system provided a universal sensing strategy for the intelligent detection of multiplex mycotoxins, demonstrating considerable potential in food safety and environmental monitoring.

Photoelectrochemical thrombin biosensor based on perylene-3,4,9,10-tetracarboxylic acid and Au co-functionalized ZnO nanorods with signal-off quenching effect of Ag@Ag2S

In this work, a thrombin photoelectrochemical aptasensor was reported based on a photoanode of perylene-3,4,9,10-tetracarboxylic acid (PTCA), Au nanoparticle co-functionalized ZnO nanorods (ZnO NRs) and the "signal-off" amplification effect of Ag@Ag2S. The photocurrent response of the ZnO NRs was improved greatly due to the excellent visible-light photoelectric performance of PTCA and the surface plasmon resonance (SPR) effect of Au nanoparticles. Due to the specific recognition between thrombin and aptamers, the non-conductive complex with a steric hindrance structure blocked the diffusion path of the electron donating ascorbic acid (AA) and then the "signal-off" Ag@Ag2S quencher was captured. The quencher blocked the irradiation light toward the ZnO NRs/PTCA/Au electrode and competitively consumed the electron donor AA that could have been involved in the oxidation reaction with photogenerated holes of PTCA, resulting in the further decrease of the photocurrent. Based on the evident photocurrent response of the photoanode and the superior quenching strategies, the detection limit of thrombin is as low as 33 fM with a wide linear detection range from 0.0001 nM to 50 nM. The prepared biosensor also exhibited good specificity, reproducibility and stability, suggesting potential application in thrombin specific detection.

Oxygen vacancies enhanced photoelectrochemical aptasensing of 2, 3', 5, 5'-tetrachlorobiphenyl amplified with Ag3VO4 nanoparticle-TiO2 nanotube array heterostructure

This work proposed an enhancing mechanism of both oxygen vacancies (OVs) and the heterostructure for amplifying the photoelectrochemical (PEC) aptasensing signal. The OVs were formed by in situ electrochemical reduction of TiO₂ nanotube arrays (TNTAs), and well-separated Ag₃VO₄ nanoparticles (NPs) were then deposited on the TNTAs. The band gaps and positions of these nanomaterials were evaluated by Tauc equation and Mott-Schottky plots to verify the formation of the heterojunction. The OVs and heterojunction greatly enhanced the visible light absorption and improved the charge separation of TNTAs. The amplified PEC signal could be quenched by the resonance energy transfer between Ag₃VO₄ NPs and gold nanorods (Au NRs), which were labeled on the complementary DNA (cDNA) to the aptamer immobilized on the heterojunction. Upon the recognition of the aptamer to target analyte, the Au NR-cDNA was detached from the sensor, leading to a "signal-on" aptasensing strategy. Under optimal conditions, the PEC aptasensor displayed a detection limit of 0.015 pg mL^-1 and a linear range from 0.02 to 300 ng mL^-1 for 2,3',5,5'-tetrachlorobiphenyl.

A label-free photoelectrochemical immunosensor for detection of the milk allergen β-lactoglobulin based on Ag2S -sensitized spindle-shaped BiVO4/BiOBr heterojunction by an in situ growth method

Food allergies have become a nonnegligible food safety issue, and milk allergies are one of the most common food allergies, that has attracted large consumer attention. In this work, a novel label-free photoelectrochemical (PEC) immunosensor for the detection of the allergen β-lactoglobulin (β-LG) in dairy products was designed that used the specific recognition of allergen β-LG and antibodies in dairy products in combination with biosensing technology. Here, Ag₂S-sensitized spindle-shaped BiVO₄/BiOBr heterojunction was fixed on the surface of the ITO electrode as an excellent photoactive substrate and effectively improved the photocurrent responses and sensitivity. Thioglycolic acid (TGA) was used as a linker to immobilize the β-LG antibody on the surface of the electrode. The photocurrent was detected at different antigen concentrations, which realized the quantitative testing of β-LG. Under the optimal experimental conditions, the PEC immunosensor proved an ideal linear relationship ranging from 10 pg/mL to 100 ng/mL, with a low detection limit of 3.7 pg/mL. The designed immunosensor showed good stability, a wide linear range, high sensitivity and good reproducibility and could be used for the detection of actual samples. The PEC immunosensor had a strong ability to specifically recognize β-LG, which was not affected by other proteins in the milk without pretreatment. Meanwhile, the developed immunosensor provided a promising PEC detection platform and reference idea for the detection of other proteins in milk.

Recent Advances in Ochratoxin A Electrochemical Biosensors: Recognition Elements, Sensitization Technologies, and Their Applications

Ochratoxin A (OTA) is a class of mycotoxin that are mainly produced by Aspergillus and Penicillium and widely found in plant origin food. OTA-contaminated foods can cause serious harm to animals and humans, while high stability of OTA makes it difficult to remove in conventional food processing. Thus, sensitive and rapid detection of OTA undoubtedly plays an important role in OTA prevention and control. In this paper, the conventional and novel methods of OTA at home and abroad are summarized and compared. The latest research progress and related applications of novel OTA electrochemical biosensors are mainly described with a new perspective. We innovatively divided the recognition element into single and combined recognition elements. Specifically, signal amplification technologies applied to the OTA electrochemical aptasensor are proposed. Furthermore, summary of the current limitations and future challenges in OTA analysis is included, which provide reference for the further research and applications.

A photoelectrochemical aptasensor for the detection of 17β-estradiol based on In2S3 and CdS co-sensitized cerium doped TiO2

In₂S₃ and CdS co-sensitized Ce doped TiO₂ optimized the transmission path of electrons.

Recent Progress of Biomarker Detection Sensors

Early cancer diagnosis and treatment are crucial research fields of human health. One method that has proven efficient is biomarker detection which can provide real-time and accurate biological information for early diagnosis. This review presents several biomarker sensors based on electrochemistry, surface plasmon resonance (SPR), nanowires, other nanostructures, and, most recently, metamaterials which have also shown their mechanisms and prospects in application in recent years. Compared with previous reviews, electrochemistry-based biomarker sensors have been classified into three strategies according to their optimizing methods in this review. This makes it more convenient for researchers to find a specific fabrication method to improve the performance of their sensors. Besides that, as microfabrication technologies have improved and novel materials are explored, some novel biomarker sensors-such as nanowire-based and metamaterial-based biomarker sensors-have also been investigated and summarized in this review, which can exhibit ultrahigh resolution, sensitivity, and limit of detection (LoD) in a more complex detection environment. The purpose of this review is to understand the present by reviewing the past. Researchers can break through bottlenecks of existing biomarker sensors by reviewing previous works and finally meet the various complex detection needs for the early diagnosis of human cancer.

Plasmonic Au-Ag Janus Nanoparticle Engineered Ratiometric Surface-Enhanced Raman Scattering Aptasensor for Ochratoxin A Detection

Ochratoxin A (OTA), a toxic mycotoxin, poses severe risks to environment and human health. Herein, we develop a ratiometric surface-enhanced Raman scattering (SERS) aptasensor based on internal standard (IS) methods for the sensitive and reproducible quantitative detection of OTA. Au-Ag Janus nanoparticles (NPs) are successfully synthesized under the guidance of 2-mercaptobenzoimidazole-5-carboxylic acid (MBIA), which possesses intrinsic Raman signals, thus no additional modification with a Raman reporter on NPs is required. In addition, Au-Ag Janus NPs exhibit amplified and stable SERS activity. MXenes nanosheets generate a unique and stable Raman signal, making them an ideal IS for quantitative Raman analysis. In principle, Au-Ag Janus NPs are assembled with MXenes nanosheets depending on hydrogen bond and the chelation interaction between MXenes nanosheets and OTA aptamers. In the presence of OTA, Au-Ag Janus NPs are dissociated from MXenes nanosheets due to the formation of aptamer/OTA complex, leading to the attenuation of Raman signal of Au-Ag Janus NPs, and meanwhile, the signal of MXenes nanosheets remain constant. Quantitatively, upon correction by the IS Raman signals, sensitive and quantitative detection can be achieved with the limit of detection (LOD) of 1.28 pM for OTA. Our results suggest that this ratiometric SERS aptasensor is a powerful tool which shows great promise for applications in complex systems.

Advances in biosensors for the detection of ochratoxin A: Bio-receptors, nanomaterials, and their applications

Ochratoxin A (OTA) is a class of mycotoxin mainly produced by the genera Aspergillus and Penicillium. OTA can cause various forms of kidney, liver and brain diseases in both humans and animals although trace amount of OTA is normally present in food. Therefore, development of fast and sensitive detection technique is essential for accurate diagnosis of OTA. Currently, the most commonly used detection methods are enzyme-linked immune sorbent assays (ELISA) and chromatographic techniques. These techniques are sensitive but time consuming, and require expensive equipment, highly trained operators, as well as extensive preparation steps. These drawbacks limit their wide application in OTA detection. On the contrary, biosensors hold a great potential for OTA detection at for both research and industry because they are less expensive, rapid, sensitive, specific, simple and portable. This paper aims to provide an extensive overview on biosensors for OTA detection by highlighting the main biosensing recognition elements for OTA, the most commonly used nanomaterials for fabricating the sensing interface, and their applications in different read-out types of biosensors. Current challenges and future perspectives are discussed as well.

A nanozyme-based cascade colorimetric aptasensor for amplified detection of ochratoxin A

Colorimetric assays have been widely developed for the detection of toxin ochratoxin A (OTA), but most of them suffer from moderate sensitivity when they are adopted for the detection of trace OTA in a complicated food matrix. For the purpose of overcoming this issue, an innovative cascade reaction-based colorimetric aptasensor was developed for the achievement of high sensitivity. The biotin-labelled OTA aptamer was immobilized onto streptavidin magnetic beads by means of the biotin-streptavidin reaction. With OTA binding to its aptamer, the structural switching of the aptamer results in the release of the alkaline phosphatase-labelled oligonucleotide, which is partially complementary to the aptamer. Following the magnetic separation, the cascade reaction is initiated through the enzymatic conversion of ascorbic acid-2-phosphate into ascorbic acid. Subsequent to that, the generated ascorbic acid reduces MnO2 nanosheets to Mn2+ ions, accordingly destroying the oxidase-mimicking activity of MnO2 nanosheets. In consequence, it is not possible to oxidize 3,3',5,5'-tetramethylbenzidine (TMB), a substrate for oxidase, with Mn2+ for the production of the blue colour product (TMB Ox). With the increasing amount of OTA, a colour change occurs from blue to colourless. The cascade reaction has the potential of greatly amplifying the detection signal, together with remarkably improving the sensitivity, making this colorimetric sensor a universal and promising platform for the highly sensitive detection of mycotoxins in the field of public food safety monitoring.

One-step hydrothermal synthesis of N/Ti3+ co-doping multiphasic TiO2/BiOBr heterojunctions towards enhanced sonocatalytic performance

N/Ti³⁺ co-doping multiphasic TiO₂/BiOBr heterojunctions (NT-TBx) were prepared by one-step in situ hydrothermal processes. The crystal phase, morphology, component, and optical properties of the heterojunctions were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, X-ray photoelectron spectroscopy, and Ultraviolet-visible diffuse reflectance spectroscopy techniques, respectively. The as-prepared samples exhibit better sonocatalytic activity for the degradation methylene blue, Rhodamine B, and p-Nitrophenol aqueous solution compared with pristine TiO₂ and N/Ti³⁺ co-doping multiphasic TiO₂. Especially, the highest degradation ratio of methylene blue was achieved for NT-TB_0.3 up to 98.2% after 50 min under ultrasonic irradiation. The high sonocatalytic activity has been kept after four cycles with the tiny decline, indicating the excellent stability of the as-prepared samples. The improvement of sonocatalytic activity could be attributed to the formation of doping level and multiphasic TiO₂/BiOBr heterojunctions, which account for the absorption of long wavelength light and the electron-hole pair separation, respectively. Furthermore, superoxide radical (O₂^-) was demonstrated to be the main reactive species for the degradation of methylene blue under ultrasonic irradiation. This study provides a facile fabrication procedure for N/Ti³⁺ co-doping multiphasic TiO₂/BiOBr heterojunctions and demonstrates an efficient route to promote the application of TiO₂ in addressing environment-related issues.