Graphene and Au NPs co-mediated enzymatic silver deposition for the ultrasensitive electrochemical detection of cholesterol

A green carbon dot@silver nanoparticle hybrid: as a turn-on fluorescent probe for the detection and quantification of cholesterol and glucose

Cholesterol and glucose are two important biomarkers that are linked to different human diseases. In this work, we have designed a turn-on fluorescent biosensor based on carbon dots hybridized by AgNPs (CD@AgNPs). Oliveria decumbens Vent. extract was used as a rich carbon source for the green synthesis of carbon dots, which exhibited excitation-dependent fluorescence with maximum emission at 409 nm under 350 nm excitation. In this approach, hydrogen peroxide, a by-product of enzymatic reactions between oxidase enzymes and analytes, etches AgNPs, leading to fluorescence recovery. The designed biosensor showed a great linear range (2-60 μM for cholesterol and 4-250 μM for glucose) with very low limits of detection (3 μM for cholesterol and 38 μM for glucose), which are lower than the concentrations of these biomarkers in human body fluids. The great selectivity and sensitivity of the designed biosensor enable it to be used for the detection of biomarkers in complex media such as artificial human plasma in only 30 min. This work could open new avenues for researchers in the fields of sustainability and biomedicine, where green and accurate biosensors are required.

A β-cyclodextrin-based supramolecular photonic crystal hydrogel biosensor with macroporous structures for naked-eye visual detection of cholesterol

Cholesterol (CHO) is an essential lipid in cell membranes and a precursor for vital living substances. Abnormal CHO levels can cause cardiovascular diseases. Therefore, simple and accurate monitoring of CHO levels is crucial for early diagnosis and effective management of cardiovascular diseases. Herein, we report a β-cyclodextrin-based supramolecular photonic crystal hydrogel (PCH) biosensor for naked-eye visual CHO detection. This sensor is composed of a poly(acrylamide-co-N-isopropylacrylamide-co-maleic anhydride-β-cyclodextrin) smart hydrogel with embedding Fe3O4 colloidal chains, which can translate CHO concentration signals into visually detectable color changes of the hydrogel. By carefully selecting a macromolecular crosslinker, a macroporous structure of the hydrogel was achieved, significantly enhancing CHO responsiveness. Molecular docking provides detailed information about the binding mode between MAH-β-CD and CHO. The cyclohexanol portion and alkyl chain of CHO molecule are inserted into MAH-β-CD cavity, driven primarily by hydrophobic interactions. Moreover, this sensor demonstrates excellent regenerability and could be facilely regenerated by washing using hot/cold water or acid solution. Furthermore, it is highly selective for CHO and is suitable for detecting actual human serums. Such a β-CD-based supramolecular PCH biosensor with visualization, excellent regenerability, and high sensitivity and selectivity toward CHO, provides a basis for clinical diagnosis of diseases relative to CHO abnormalities.

Conductive single enzyme nanocomposites prepared by in-situ growth of nanoscale polyaniline for high performance enzymatic bioelectrode

Enzyme-based electrochemical biosensors hold great promise for applications in health/disease monitoring, drug discovery, and environmental monitoring. However, inherently non-conductive nature of proteinaceous enzymes often hampers effective electron transfer at enzyme-electrode interface, limiting biosensor performance of enzyme bioelectrodes. To address this problem, we present an approach to synthesize polyaniline (PAN)-based conductive single enzyme nanocomposites of glucose oxidase (GOx) (denoted as PAN-GOx). To prevent multimerization of enzymes during nanocomposite synthesis and enable single enzyme wrapping, we activate GOx surface with phenylamine groups based on the programmed diffusion of reactants in the reaction solution. Subsequent in-situ polymerization enables the synthesis of nanoscale conductive PAN layer (∼2.7 nm thickness) grafted from individual GOx molecule. PAN-GOx retains 83% and 74% of its specific activity and catalytic efficiency, respectively, compared to free GOx, while demonstrating a ∼500% improved conductivity. Furthermore, PAN-GOx-based glucose biosensors show an approximately 16- and 3-fold higher sensitivity compared to biosensors prepared by using free GOx and a mixture of PAN and GOx, respectively. This study provides a facile method to fabricate conductive single enzyme nanocomposites with enhanced electron transfer, which can potentially be further modified and/or compounded with conductive materials for demonstrating high performance enzymatic bioelectrodes.

Carbon-based light addressable potential aptasensor based on the synergy of C-MXene@rGO and OPD@NGQDs for low-density lipoprotein detection

A novel carbon-based light-addressable potentiometric aptasensor (C-LAPS) was constructed for detection low-density lipoprotein (LDL) in serum. Carboxylated Ti3C2 MXene @reduced graphene oxide (C-MXene@rGO) was used as interface and o-phenylenediamine functionalized nitrogen-doped graphene quantum dots (OPD@NGQDs) as the photoelectric conversion element. The photosensitive layers composed of OPD@NGQDs/C-MXene@rGO exhibit superior photoelectric conversion efficiency and excellent biocompatibility, which contribute to an improved response signal. When LDL reacts with the LDL aptamer (LDLApt) immobilized on the photosensitive layers to form LDL-LDLApt complexes, the reaction process can induce the modification of the surface potential in the photosensitive layer, leading to potential shift observed through the I-V curves. The experimental conditions were successfully optimized with few planned tests by applying the Box-Behnken design and response surface methodology aspects of the Design-Expert software. Under the optimal condition, the potential shift had a linear relationship with concentrations of LDL from 0.02 to 0.30 μg/mL. The limit of detection (LOD) was 5.88 ng/mL (S/N = 3) and the sensitivity was 315.20 mV/μg·mL-1. In addition, the LDL C-LAPS demonstrated excellent specificity, reproducibility, and stability in detecting LDL. The sensor performed well in quantifying LDL in real samples. Therefore, the LDL C-LAPS has the potential for clinical applications.

Development of an electrochemical biosensor for non-invasive cholesterol monitoring via microneedle-based interstitial fluid extraction

In this study, we present the development of an innovative electrochemical biosensor integrated into a microneedle-based system for non-invasive and sensitive quantification of cholesterol levels in interstitial fluid (ISF). The biosensor employs a graphene-based electrode with a polyelectrolyte interlayer to immobilize cholesterol oxidase (ChOx), enabling selective cholesterol detection. Graphene oxide is electrochemically reduced to form a conductive layer, and PANI is chosen as the optimal polyelectrolyte for ChOx immobilization. The biosensor's performance is thoroughly evaluated, demonstrating excellent sensitivity, stability, and selectivity. Furthermore, the biosensor is successfully applied to skin-mimicking agarose gel and porcine skin, showcasing its potential for real-world interstitial fluid extraction and cholesterol monitoring. The integrated microneedle-based system offers a promising approach for non-invasive monitoring of cholesterol levels, with implications for personalized healthcare diagnostics.

Calix[6]arene-Functionalized Photonic Hydrogel Biosensor for Naked-Eye Cholesterol Detection Based on Supramolecular Host-Guest Interactions

Cholesterol (CHO) is an essential constituent of human cellular tissues and a crucial activity indicator for the clinical diagnosis and prevention of various diseases. Abnormal CHO levels can lead to various cardiovascular diseases, including coronary heart disease, cerebral thrombosis, and atherosclerosis. Thus, developing simple and effective methods for CHO detection is of great significance. Herein, a novel calix[6]arene-modified photonic hydrogel biosensor (PAAH@SCX6) was developed for naked-eye monitoring of CHO based on supramolecular host-guest interactions between 4-sulfocalix[6]arene (SCX6) and CHO molecules. This sensor was constructed by embedding Fe3O4 colloidal nanocrystal cluster chains into a poly(acrylamide-co-acrylic acid) smart hydrogel (PAAH), followed by incorporation of plentiful SCX6 units into the PAAH via hydrogen bonding interactions. The specific recognition of SCX6 to CHO leads to the volume expansion of the hydrogel, causing a shift in the photonic band gap and a change in the hydrogel's structural color. The sensor demonstrated a linear detection range of 2.83-5.20 mM, covering the typical CHO levels in the human body. Importantly, the PAAH@SCX6 biosensor showed high selectivity and satisfactory stability, making it highly suitable for practical applications. Such a photonic hydrogel-based biosensor provides a convenient, simple, and efficient strategy for visual CHO detection.

Simultaneous detection of multiple mycotoxins using MXene-based electrochemical aptasensor array and a self-developed multi-channel portable device

In response to the pressing need for highly efficient simultaneous detection of multiple mycotoxins, which are often found co-occurring in food raw materials and feed, an MXene-based electrochemical aptasensor array (MBEAA) was developed. This aptasensor array utilizes high-specificity aptamers as recognition elements, enabling the capture of electrical signal changes in the presence of target mycotoxins. Based on this platform, a multi-channel portable electrochemical device, enabling rapid, cost-effective, and simultaneous detection of aflatoxin B1 (AFB1), ochratoxin A (OTA), and zealenone (ZEN) was further developed. The developed system boasts a wide detection range of 1.0 × 10-1 to 10.0 ng mL-1, with remarkable performance characterized by ultra-low detection limits of 41.2 pg mL-1, 27.6 pg mL-1, and 33.0 pg mL-1 for AFB1, OTA, and ZEN, respectively. Successfully applied in corn samples, this method offers a portable, easy-to-operate, and cost-effective solution for simultaneous multi-mycotoxin detection. Moreover, the application of the self-developed detection system could be expanded for simultaneous detection of many different targets when their specific aptamers or antibodies were available.

Recent advances in biological molecule detection based on a three-dimensional graphene structure

Graphene has become an attractive material in the field of electrochemical detection owing to its unique electrical properties. Although the simple stacking structures of two-dimensional (2D) graphene sheets can provide excellent detection properties, a macroscopic three-dimensional (3D) structure needs to be constructed to enhance its functional properties. Graphene with a 3D structure has elegant functions, unlike graphene with a 2D structure. These properties include a large specific surface area, easy loading of nanomaterials with electrocatalytic and redox functions, and so on. Herein, we outline the preparation methods (self-assembly, chemical vapor deposition, templates, and 3D printing) for 3D graphene structures for obtaining excellent detection performance and applications in detecting biological molecules, bacteria, and cells. Furthermore, this review focuses on the improvement of the detection performance and enhancement of the applicability of graphene-based electrochemical sensors. We hope that this article will provide a reference for the future development of electrochemical sensors based on 3D graphene composites.

Surface enhanced Raman spectroscopy sensor based on silver nanoparticles/multi wall carbon nanotubes for ultrasensitive detection of cholesterol

Cholesterol is vital for living things because of an important part of cell membranes, as well as one of the basic components of brain and nerve cells. However, cholesterol must be at an optimum level. If it is below or above this level, it is a marker of many various diseases. Therefore, the detection of cholesterol amount is very important. Herein, MWCNTs were synthesized and AgNPs were grown on their surfaces. Thus, AgNP/MWCNT hybrid material was obtained. The AgNP/MWCNTs were used as surface enhancement Raman scattering (SERS) substrate to quantify the cholesterol molecule. High SERS enhancement of AgNP/MWCNT, specific SERS sensing platform and high sensitive SERS substrate were proposed to determine and monitor cholesterol molecule. AgNP/MWCNT substrate was studied in the concentration range of 10-3-10-10 M and the limit of detection (LOD) was calculated as 3.24 × 10-11 M. In addition, the enhancement factor (EF) was determined as 6.21 × 109. As a result, it was reported in this study that cholesterol molecule can be determined with excellent accuracy, precision and sensitive by using AgNP/MWCNT substrate and therefore it can provide great potential in clinical diagnosis and health management.

A General Review of Methodologies Used in the Determination of Cholesterol (C27H46O) Levels in Foods

Cholesterol (C27H46O) is a lipid-derived substance found in lipoproteins and cell membranes. It is also one of the main sources for the production of bile acids, vitamin D, and steroid hormones. Today, foods are evaluated by consumers not only according to their taste and nutritional content but also according to their effects on consumer health. For example, many consumers choose foods according to their cholesterol level. The cholesterol in the food can directly affect the blood cholesterol level when consumed, which can lead to cardiovascular diseases. High levels of cholesterol can lead to diet-related human diseases such as cardiac arrest, paralysis, type II diabetes, and cerebral hemorrhage. In societies with high living standards, interest in and consumption of foods that lower or have low cholesterol levels have increased recently. Accordingly, efforts to increase the variety of foods with reduced cholesterol levels are on the rise. This has indirectly led to the accurate measurement of cholesterol levels in blood and food being of great importance. Classical chemical, enzymatic, colorimetric, polarographic, chromatographic, and spectrophotometric methods; enzymatic, nonenzymatic, and electrochemical sensors; and biosensors are used for the determination of cholesterol in foods. The purpose of this review is to reveal and explore current and future trends in cholesterol detection methods in foods. This review will summarize the most appropriate and standard methods for measuring cholesterol in biological components and foods.

Efficient Simultaneous Detection of Metabolites Based on Electroenzymatic Assembly Strategy

Objective and Impact Statement: We describe an electroenzymatic mediator (EM) sensor based on an electroenzymatic assembly peak separation strategy, which can efficiently realize the simultaneous detection of 3 typical cardiovascular disease (CVD) metabolites in 5 μl of plasma under one test. This work has substantial implications toward improving the efficiency of chronic CVD assessment. Introduction: Monitoring CVD of metabolites is strongly associated with disease risk. Independent and time-consuming detection in hospitals is unfavorable for chronic CVD management. Methods: The EM was flexibly designed by the cross-linking of electron mediators and enzymes, and 3 EM layers with different characteristics were assembled on one electrode. Electrons were transferred under tunable potential; 3 metabolites were quantitatively detected by 3 peak currents that correlated with metabolite concentrations. Results: In this study, the EM sensor showed high sensitivity for the simultaneous detection of 3 metabolites with a lower limit of 0.01 mM. The linear correlation between the sensor and clinical was greater than 0.980 for 242 patients, and the consistency of risk assessment was 94.6%. Conclusion: Metabolites could be expanded by the EM, and the sensor could be a promising candidate as a home healthcare tool for CVD risk assessment.

Optimization of the tandem enzyme activity of V-MOF and its derivatives for highly sensitive nonenzymatic detection of cholesterol in living cells

It remains a great challenge to properly design and synthesize single-component artificial tandem enzymes for specific substrates with high selectivity. Herein, V-MOF is synthesized by solvothermal method and its derivatives are constructed via pyrolyzing V-MOF in nitrogen atmosphere at different temperatures, which are denoted as V-MOF-y (y = 300, 400, 500, 700 and 800). V-MOF and V-MOF-y possess tandem enzyme-like activity, i.e. cholesterol oxidase-like and peroxidase-like activity. Among them, V-MOF-700 shows the strongest tandem enzyme activity for V-N bonds. Based on the cascade enzyme activity of V-MOF-700, the nonenzymatic detection platform for cholesterol by fluorescent assay can be established in the presence of o-phenylenediamine (OPD) for the first time. The detection mechanism is that V-MOF-700 catalyzes cholesterol to generate hydrogen peroxide and further form hydroxyl radical (•OH), which can oxidize OPD to obtain oxidized OPD (oxOPD) with yellow fluorescence. The linear detection of cholesterol ranges of 2-70 μM and 70-160 μM with a lower detection limit of 0.38 μM (S/N = 3) are obtained. This method is used to detect cholesterol in human serum successfully. Especially, it can be applied to the rough quantification of membrane cholesterol in living tumor cells, indicating that it has the potential for clinical application.

An Efficient Electrochemical Biosensor to Determine 1,5-Anhydroglucitol with Persimmon-Tannin-Reduced Graphene Oxide-PtPd Nanocomposites

1,5-Anhydroglucitol (1,5-AG) is a sensitive biomarker for real-time detection of diabetes mellitus. In this study, an electrochemical biosensor to specifically detect 1,5-AG levels based on persimmon-tannin-reduced graphene oxide-PtPd nanocomposites (PT-rGO-PtPd NCs), which were modified onto the surface of a screen-printed carbon electrode (SPCE), was designed. The PT-rGO-PtPd NCs were prepared by using PT as the film-forming material and ascorbic acid as the reducing agent. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), and X-ray diffraction (XRD) spectroscopy analysis were used to characterise the newly synthesised materials. PT-rGO-PtPd NCs present a synergistic effect not only to increase the active surface area to bio-capture more targets, but also to exhibit electrocatalytic efficiency to catalyze the decomposition of hydrogen peroxide (H₂O₂). A sensitive layer is formed by pyranose oxidase (PROD) attached to the surface of PT-rGO-PtPd NC/SPCE. In the presence of 1,5-AG, PROD catalyzes the oxidization of 1,5-AG to generate 1,5-anhydrofuctose (1,5-AF) and H₂O₂ which can be decomposed into H₂O under the synergistic catalysis of PT-rGO-PtPd NCs. The redox reaction between PT and its oxidative product (quinones, PTox) can be enhanced simultaneously by PT-rGO-PtPd NCs, and the current signal was recorded by the differential pulse voltammetry (DPV) method. Under optimal conditions, our biosensor shows a wide range (0.1-2.0 mg/mL) for 1,5-AG detection with a detection limit of 30 μg/mL (S/N = 3). Moreover, our electrochemical biosensor exhibits acceptable applicability with recoveries from 99.80 to 106.80%. In summary, our study provides an electrochemical method for the determination of 1,5-AG with simple procedures, lower costs, good reproducibility, and acceptable stability.

A Recent Update on the Impact of Nano-Selenium on Plant Growth, Metabolism, and Stress Tolerance

Selenium (Se) is a microelement that plays an important nutrient role by influencing various physiological and biochemical traits in plants. It has been shown to stimulate plant metabolism, enhancing secondary metabolites and lowering abiotic and biotic stress in plants. Globally, the enormous applications of nanotechnology in the food and agricultural sectors have vastly expanded. Nanoselenium is more active than bulk materials, and various routes of synthesis of Se nanoparticles (Se-NPs) have been reported in which green synthesis using plants is more attractive due to a reduction in ecological issues and an increase in biological activities. The Se-NP-based biofortification is more significant because it increases plant stress tolerance and positively impacts their metabolism. Se-NPs can enhance plant resistance to various oxidative stresses, promote growth, enhance soil nutrient status, enhance plant antioxidant levels, and participate in the transpiration process. Additionally, they use a readily available, biodegradable reducing agent and are ecologically friendly. This review concentrates on notable information on the different modes of Se-NPs' synthesis and characterization, their applications in plant growth, yield, and stress tolerance, and their influence on the metabolic process.

Electrochemical devices for cholesterol detection

Cholesterol can be considered as a biomarker of illnesses such as heart and coronary artery diseases or arteriosclerosis. Therefore, the fast determination of its concentration in blood is interesting as a means of achieving an early diagnosis of these unhealthy conditions. Electrochemical sensors and biosensors have become a potential tool for selective and sensitive detection of this biomolecule, combining the analytical advantages of electrochemical techniques with the selective recognition features of modified electrodes. This review covers the different approaches carried out in the development of electrochemical sensors for cholesterol, differentiating between enzymatic biosensors and non-enzymatic systems, highlighting lab-on-a-chip devices. A description of the different modification procedures of the working electrode has been included and the role of the different functional materials used has been discussed.

Square wave voltammetric detection of cholesterol with biosensor based on poly(styrene--ε-caprolactone)/MWCNTs composite

A novel poly(styrene--ε-caprolactone)/multiwalled carbon nanotubes/cholesterol oxidase film-coated glassy carbon electrode was designed for cholesterol detection by square wave voltammetry (SWV). The biosensor responded to cholesterol with a measurement concentration range between 1 and 130 μM, a relative standard deviation of only 0.095% and accuracy of 100.42% ±2.85 with the SWV technique in the potential range from -0.6 to +0.6 V. The limit of detection was calculated to be 0.63 μM. The biosensor was preserved 91 and 84% of its initial response at the end of the 9st and 25st days, respectively. Human serum from human male AB plasma was analyzed without pretreatment except for dilution to investigate the performance of the biosensor in a complex medium.

Radix Pueraria Flavonoids Assisted Green Synthesis of Reduced Gold Nanoparticles: Application for Electrochemical Nonenzymatic Detection of Cholesterol in Food Samples

Using radix pueraria flavonoids (RPFs) as a reducing and stabilizing agent, we report a simple, cost-effective, and ecologically friendly green synthesis technique for gold nanoparticles (AuNPs) in the present study. Ultraviolet-visible (UV) spectroscopy, transmission electron microscopy (TEM), Fourier transform infrared (FTIR), and X-ray diffraction (XRD) investigations were used to characterize the AuNPs. The results demonstrated that the produced AuNPs were nearly spherical and that their particle sizes had a mean diameter of 4.85 ± 0.75 nm. The "Green" AuNPs, exhibiting remarkable peroxidase-like activity and Michaelis-Menten kinetics with high affinity for H2O2 and 3,3',5,5'-tetramethylbenzidine (TMB), were effectively applied to the fabrication of a sensitive nonenzymatic enhanced electrochemical sensor for the detection of cholesterol (Cho). Under optimum circumstances, it was possible to establish two linear ranges of 1-100 and 250-5000 μmol/L with a detection limit of 0.259 μmol/L (signal/noise ratio (S/N) = 3). The suggested sensor was utilized with satisfactory findings to determine the amount of Cho in food samples.

Dual-mode photoelectrochemical/electrochemical sensor based on Z-scheme AgBr/AgI-Ag-CNTs and aptamer structure switch for the determination of kanamycin

A "signal-on" dual-mode aptasensor based on photoelectrochemical (PEC) and electrochemical (EC) signals was established for kanamycin (Kana) assay by using a novel Z-scheme AgBr/AgI-Ag-CNTs composite as sensing platform, an aptamer structure switch, and K₃[Fe(CN)₆] as photoelectron acceptor and electrochemical signal indicator. The aptamer structure switch was designed to obtain a "signal-off" state, which included an extended Kana aptamer (APT), one immobilized probe (P1), and one blocking probe (P2) covalently linked with graphdiyne oxide (GDYO) nanosheets. P1, P2, and aptamer formed the double helix structure, which resulted in the inhibited photocurrent intensity because of the weak conductivity of double helix layer and serious electrostatic repulsion of GDYO towards K₃[Fe(CN)₆]. In the presence of Kana, APT specifically bound to the target and dissociated from P1 and P2, and thus, a "signal-on" state was initiated by releasing P2-GDYO from the platform. Based on the sensing platform and the aptamer structure switch, the dual-mode aptasensor realized the linear determination ranges of 1.0 pM-2.0 μM with a detection limit (LOD) of 0.4 pM (for PEC method) and 10 pM-5.0 μM with a LOD of 5 pM (for EC method). The aptasensor displayed good application potential for Kana test in real samples.

Ratiometric Fluorescence Probe of Vesicle-like Carbon Dots and Gold Clusters for Quantitation of Cholesterol

We report a facile method for the preparation of vesicle-like carbon dots (VCDs) via dry-heating of surfactant solutions. Like most reported CDs, the VCDs possess interesting fluorescence properties. Entrapment of enzymes and gold nanoclusters (AuNCs) inside the VCDs allows for the development of fluorescent probes for the quantitation of various substrates, with the advantages of high sensitivity and selectivity. The AuNCs act as a probe, and the VCDs as an internal standard confine the AuNCs, enzyme, and analyte to provide high local concentrations to enhance the assay sensitivity. In this study, we employed cholesterol oxidase (ChOX) as a model enzyme for the quantitation of cholesterol. The as-formed hydrogen peroxide through the enzyme reaction inside the VCDs causes fluorescence quenching of AuNCs (excitation/emission wavelengths of 320/670 nm), but not that of the VCDs (excitation/emission wavelengths of 320/400 nm). To improve the sensitivity and linearity, the fluorescence ratios of AuNCs/VCDs are plotted against analyte concentration. The present ratiometric fluorescent method allows for the detection of hydrogen peroxide over the concentration range of 1–100 μM, with a detection limit of 0.673 μM, and cholesterol concentrations ranging from 5 to 100 μM, with a detection limit of 2.8 μM. The practicality of this fluorescent method has been further validated by evaluating cholesterol levels in human serum samples with sufficient accuracy and recovery, revealing its great prospective in diagnosis and biomedical applications.

A sensitive cholesterol electrochemical biosensor based on biomimetic cerasome and graphene quantum dots

A simple and sensitive electrochemical cholesterol biosensor was fabricated based on ceramic-coated liposome (cerasome) and graphene quantum dots (GQDs) with good conductivity. The cerasome consists of a lipid-bilayer membrane and a ceramic surface as a soft biomimetic interface, and the mild layer-by-layer self-assembled method as the immobilization strategy on the surface of the modified electrode was used, which can provide good biocompatibility to maintain the biological activity of cholesterol oxidase (ChOx). The GQDs promoted electron transport between the enzyme and the electrode more effectively. The structure of the cerasome-forming lipid was characterized by Fourier transform infrared (FT-IR). The morphology and characteristics of the cerasome and GQDs were characterized by transmission electron microscopy (TEM), zeta potential, photoluminescence spectra (PL), etc. The proposed biosensors revealed excellent catalytic performance to cholesterol with a linear concentration range of 16.0 × 10^-6-6.186 × 10^-3 mol/L, with a low detection limit (LOD) of 5.0 × 10^-6 mol/L. The Michaelis-Menten constant (K_m) of ChOx was 5.46 mmol/L, indicating that the immobilized ChOx on the PEI/GQDs/PEI/cerasome-modified electrode has a good affinity to cholesterol. Moreover, the as-fabricated electrochemical biosensor exhibited good stability, anti-interference ability, and practical application for cholesterol detection.

A Comprehensive Review on the Use of Metal–Organic Frameworks (MOFs) Coupled with Enzymes as Biosensors

Several studies have shown the development of electrochemical biosensors based on enzymes immobilized in metal–organic frameworks (MOFs). Although enzymes have unique properties, such as efficiency, selectivity, and environmental sustainability, when immobilized, these properties are improved, presenting significant potential for several biotechnological applications. Using MOFs as matrices for enzyme immobilization has been considered a promising strategy due to their many advantages compared to other supporting materials, such as larger surface areas, higher porosity rates, and better stability. Biosensors are analytical tools that use a bioactive element and a transducer for the detection/quantification of biochemical substances in the most varied applications and areas, in particular, food, agriculture, pharmaceutical, and medical. This review will present novel insights on the construction of biosensors with materials based on MOFs. Herein, we have been highlighted the use of MOF for biosensing for biomedical, food safety, and environmental monitoring areas. Additionally, different methods by which immobilizations are performed in MOFs and their main advantages and disadvantages are presented.

Ultrasensitive electrochemical biosensors for dopamine and cholesterol: recent advances, challenges and strategies

The rapid and accurate determination of the dopamine (neurotransmitter) and cholesterol level in bio-fluids is significant because they are crucial bioanalytes for several lethal diseases, which require early diagnosis. The level of DA in the brain is modulated by the dopamine active transporter (DAT), and is influenced by cholesterol levels in the lipid membrane environment. Accordingly, electrochemical biosensors offer rapid and accurate detection and exhibit unique features such as low detection limits even with reduced volumes of analyte, affordability, simple handling, portability and versatility, making them appropriate to deal with augmented challenges in current clinical and point-of-care diagnostics for the determination of dopamine (DA) and cholesterol. This feature article focuses on the development of ultrasensitive electrochemical biosensors for the detection of cholesterol and DA for real-time and onsite applications that can detect targeted analytes with reduced volumes and sub-picomolar concentrations with quick response times. Furthermore, the development of ultrasensitive biosensors via cost-effective, simple fabrication procedures, displaying high sensitivity, selectivity, reliability and good stability is significant in the impending era of electrochemical biosensing. Herein, we emphasize on recent advanced nanomaterials used for the ultrasensitive detection of DA and cholesterol and discuss in depth their electrochemical activities towards ultrasensitive responses. Key points describing future perspectives and the challenges during detection with their probable solutions are discussed, and the current market is also surveyed. Further, a comprehensive review of the literature indicates that there is room for improvement in the miniaturization of cholesterol and dopamine biosensors for lab-on-chip devices and overcoming the current technical limitations to facilitate full utilization by patients at home.

3D printed enzymatic microchip for multiplexed electrochemical biosensing

The low-cost e-fabrication of specialized multianalyte biosensors within the point-of-care (POC) settings in a few minutes remains a great challenge. Unlike prefabricated biosensors, 3D printing seems to be able to meet this challenge, empowering the end user with the freedom to create on-demand devices adapted to immediate bioanalytical need. Here, we describe a novel miniature all-3D-printed 4-electrode biochip, capable of the simultaneous determination of different biomarkers in a single assay. The chip is utterly fabricated via an one-step 3D printing process and it is connected to a mini portable bi-potentiostant, permitting simultaneous measurements. The bioanalytical capability of the microchip is demonstrated through the simultaneous amperometric determination of two cardiac biomarkers (cholesterol and choline) in the same blood droplet, via enzymatic assays developed on its two tiny integrated electrodes. The simultaneous determination of cholesterol and choline is free from cross-talk phenomena and interferences offering limits of detection much lower than the cut-off levels of these biomarkers in blood for coronary syndromes. The biodevice is an easy-constructed, low-cost, sensitive and e-transferable POC chip with wide scope of applicability to other enzymatic bioassays.

Graphene and Graphene Oxide as a Support for Biomolecules in the Development of Biosensors

Graphene and graphene oxide have become the base of many advanced biosensors due to their exceptional characteristics. However, lack of some properties, such as inertness of graphene in organic solutions and non-electrical conductivity of graphene oxide, are their drawbacks in sensing applications. To compensate for these shortcomings, various methods of modifications have been developed to provide the appropriate properties required for biosensing. Efficient modification of graphene and graphene oxide facilitates the interaction of biomolecules with their surface, and the ultimate bioconjugate can be employed as the main sensing part of the biosensors. Graphene nanomaterials as transducers increase the signal response in various sensing applications. Their large surface area and perfect biocompatibility with lots of biomolecules provide the prerequisite of a stable biosensor, which is the immobilization of bioreceptor on transducer. Biosensor development has paramount importance in the field of environmental monitoring, security, defense, food safety standards, clinical sector, marine sector, biomedicine, and drug discovery. Biosensor applications are also prevalent in the plant biology sector to find the missing links required in the metabolic process. In this review, the importance of oxygen functional groups in functionalizing the graphene and graphene oxide and different types of functionalization will be explained. Moreover, immobilization of biomolecules (such as protein, peptide, DNA, aptamer) on graphene and graphene oxide and at the end, the application of these biomaterials in biosensors with different transducing mechanisms will be discussed.

Multienzyme nanoassemblies: from rational design to biomedical applications

Multienzyme nanoassemblies (MENAs) that combine the functions of several enzymes into one entity have attracted widespread research interest due to their improved enzymatic performance and great potential for multiple applications. Considerable progress has been made to design and fabricate MENAs in recent years. This review begins with an introduction of the up-to-date strategies in designing MENAs, mainly including substrate channeling, compartmentalization and control of enzyme stoichiometry. The desirable properties that endow MENAs with important applications are also discussed in detail. Then, the recent advances in utilizing MENAs in the biomedical field are reviewed, with a particular focus on biosensing, tumor therapy, antioxidant and drug delivery. Finally, the challenges and perspectives for development of versatile MENAs are summarized.

Application of Functionalized Graphene Oxide Based Biosensors for Health Monitoring: Simple Graphene Derivatives to 3D Printed Platforms

Biosensors hold great potential for revolutionizing personalized medicine and environmental monitoring. Their construction is the key factor which depends on either manufacturing techniques or robust sensing materials to improve efficacy of the device. Functional graphene is an attractive choice for transducing material due to its various advantages in interfacing with biorecognition elements. Graphene and its derivatives such as graphene oxide (GO) are thus being used extensively for biosensors for monitoring of diseases. In addition, graphene can be patterned to a variety of structures and is incorporated into biosensor devices such as microfluidic devices and electrochemical and plasmonic sensors. Among biosensing materials, GO is gaining much attention due to its easy synthesis process and patternable features, high functionality, and high electron transfer properties with a large surface area leading to sensitive point-of-use applications. Considering demand and recent challenges, this perspective review is an attempt to describe state-of-the-art biosensors based on functional graphene. Special emphasis is given to elucidating the mechanism of sensing while discussing different applications. Further, we describe the future prospects of functional GO-based biosensors for health care and environmental monitoring with a focus on additive manufacturing such as 3D printing.

A cathode photoelectrochemical assay of terminal deoxynucleotidyl transferase activity based on Ag-AgI-CNTs composite and surface multisite strand displacement amplification

Photocathode-based assay is anti-interference for real sample detection. Photocathode produces low photocurrent signal and gives rise to poor sensitivity. Herein, a novel cathode photoelectrochemical (CPEC) sensing platform based on Ag-AgI-CNTs as photocathode material and K₃[Fe(CN)₆] as photoelectron acceptor was established. Since [Fe(CN)₆]^3- effectively accepted photoelectrons from Ag-AgI-CNTs, it greatly enhanced the CPEC response. Combining a surface multisite strand displacement amplification (SMSDA) strategy, the CPEC platform was applied for the activity assay of terminal deoxynucleotidyl transferase (TdT). In this proposal, oligo dT primer tethered on CPEC platform was in-situ extended to generate a polyA tail. Then the polyA tail formed a stable multi-point hybrid structure with the adjacent oligo dT. After launching the SMSDA, the CPEC platform was covered by more elongated polynucleotide chains and network, which acutely hampered the photoelectron transfer (eT) between photocathode and electron acceptor and caused a reduced photocurrent. The CPEC sensor possessed a satisfactory linear response from 6 × 10^-5-0.1 U and a low detection limit of 1.1 × 10^-5 U. The strategy offered a more specific and sensitive method for TdT activity assay. It was feasible in the field of TdT-based biochemical research, drug screening, and disease diagnosis.

Visual Quantitative Detection of Glutathione and Cholesterol in Human Blood Based on the Thiol-Ene Click Reaction-Triggered Wettability Change of the Interface

Herein, we proposed an innovative visual quantitative sensing strategy based on thiol-ene click chemistry and the capillary action principle. A triethoxyvinylsilane (VTEO)- or mercaptopropylsilatrane (MPS)-modified interface was prepared for analyte recognition. Target analyte molecules containing thiol groups or C═C double bonds are coupled to the VTEO- or MPS-modified inner surface of the glass capillary tube via a thiol-ene click reaction, respectively. Then, the molecular recognition events were transformed into the wettability change of the inner wall of the glass capillary. The concentration of the target molecules was quantified by reading the height change of the water column in the capillary tube. As a proof of concept, this strategy was successfully used to build visual quantitative sensors for detecting glutathione and cholesterol. In addition, this strategy showed a good anti-interference ability to complex biological fluids and realized sensitive glutathione (GSH) and cholesterol detection in real human blood samples.

Tunable graphdiyne for DNA surface adsorption: affinities, displacement, and applications for fluorescence sensing

Graphdiyne (GDY) adsorbed DNA probes have been used as a fluorescent sensing platform, but topics including DNA adsorption affinities, DNA probe displacement, and fluorescence quenching ability were rarely researched. Herein, the adsorption affinity of single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA) on a tremella-like GDY was tuned by modulating the surface chemistry of GDY. The fluorescence quenching ability of GDY with different oxidation degrees was compared. The nonspecific displacement of DNA probes on GDY was studied. Under the same concentrations, GDY with low oxidation degree exhibited stronger adsorption affinity and higher adsorption capacity to both ssDNA and dsDNA than highly oxidized GDY. DNA adsorbed on low-oxidized GDY was more resistant to displacement by other DNAs. Protein showed strong interaction with different GDY and could displace DNA probes on GDY. Based on these findings, an ideal GDY with proper oxidation degree, exhibiting high surface affinity for ssDNA and low affinity for dsDNA, was used as scavenger of redundant ssDNA fluorescent probe in an enzyme-assisted amplification system for sensitive ochratoxin (OTA) detection. This study has enhanced our fundamental understanding of DNA adsorption by GDY. It also provided a rational way to apply GDY for fluorescence sensing in a complicated system.

Recent Development in Nanomaterial-Based Electrochemical Sensors for Cholesterol Detection

Functional nanomaterials have attracted significant attention in a variety of research fields (in particular, in the healthcare system) because of the easily controllable morphology, their high chemical and environmental stability, biocompatibility, and unique optoelectronic and sensing properties. The sensing properties of nanomaterials can be used to detect biomolecules such as cholesterol. Over the past few decades, remarkable progress has been made in the production of cholesterol biosensors that contain nanomaterials as the key component. In this article, various nanomaterials for the electrochemical sensing of cholesterol were reviewed. Cholesterol biosensors are recognized tools in the clinical diagnosis of cardiovascular diseases (CVDs). The function of nanomaterials in cholesterol biosensors were thoroughly discussed. In this study, different pathways for the sensing of cholesterol with functional nanomaterials were investigated.

An Overview on Recent Progress of Metal Oxide/Graphene/CNTs-Based Nanobiosensors

Nanobiosensors are convenient, practical, and sensitive analyzers that detect chemical and biological agents and convert the results into meaningful data between a biologically active molecule and a recognition element immobilized on the surface of the signal transducer by a physicochemical detector. Due to their fast, accurate and reliable operating characteristics, nanobiosensors are widely used in clinical and nonclinical applications, bedside testing, medical textile industry, environmental monitoring, food safety, etc. They play an important role in such critical applications. Therefore, the design of the biosensing interface is essential in determining the performance of the nanobiosensor. The unique chemical and physical properties of nanomaterials have paved the way for new and improved sensing devices in biosensors. The growing demand for devices with improved sensing and selectivity capability, short response time, lower limit of detection, and low cost causes novel investigations on nanobiomaterials to be used as biosensor scaffolds. Among all other nanomaterials, studies on developing nanobiosensors based on metal oxide nanostructures, graphene and its derivatives, carbon nanotubes, and the widespread use of these nanomaterials as a hybrid structure have recently attracted attention. Nanohybrid structures created by combining these nanostructures will directly meet the future biosensors' needs with their high electrocatalytic activities. This review addressed the recent developments on these nanomaterials and their derivatives, and their use as biosensor scaffolds. We reviewed these popular nanomaterials by evaluating them with comparative studies, tables, and charts.

Site-specifically wired and oriented glucose dehydrogenase fused to a minimal cytochrome with high glucose sensing sensitivity

Direct electron transfer based enzymatic biosensors are highly efficient systems where electrons are transferred directly from the enzyme's electroactive site to the electrode. One way of achieving it is by 'wiring' the enzyme to the electrode surface. The wiring of enzymes to electrode surfaces can be reached in many different ways but controlling its orientation towards the electrode surface is still a challenge. In this study we have designed a Flavin-adenine dinucleotide dependent glucose dehydrogenase that is fused to a minimal cytochrome with a site-specifically incorporated unnatural amino acid to control its orientation towards the electrode. Several site-specifically wired mutant enzymes were compared to each other and to a non-specifically wired enzyme using atomic force microscopy and electrochemical techniques. The surface and activity analyses suggest that the site-specific wiring through different sites maintains the correct folding of the enzyme and have a positive effect on the apparent electrochemical electron transfer rate constant k_ET^app. Electrochemical analysis revealed an efficient electron transfer rate with more than 15 times higher i_max and 10-fold higher sensitivity of the site-specifically wired enzyme variants compared to the non-specifically wired ones. This approach can be utilized to control the orientation of other redox enzymes on electrodes to allow a significant improvement of their electron transfer communication with electrodes.

Magnetic Nanoparticle-Based Ligand Replacement Strategy for Chemical Luminescence Determination of Cholesterol

Determination of serum cholesterol (Chol) is important for disease diagnosis, and has attracted great attention during the last few decades. Herein, a new magnetic nanoparticle-based ligand replacement strategy has been presented for chemical luminescence detection of Chol. The detection depends on ligand replacement from ferrocene (Fc) to Chol through a β-cyclodextrin (β-CD)-based host-guest interaction, which releases Fc-Hemin as a catalyst for the luminol/hydrogen peroxide chemical luminescence system. More importantly, the luminescence signal can be captured by the camera of a smartphone, thus realizing Chol detection with less instrument dependency. The limit of detection of this method is calculated to be 0.18 μM, which is comparable to some of the developed methods. Moreover, this method has been used successfully to quantify Chol from serum samples with a simple extraction process.

On-Site Colorimetric Detection of Cholesterol Based on Polypyrrole Nanoparticles

Herein, we report a facile method for cholesterol detection by coupling the peroxidase-like activity of polypyrrole nanoparticles (PPy NPs) and cholesterol oxidase (ChOx). ChOx can catalyze the oxidation of cholesterol to produce H₂O₂. Subsequently, PPy NPs, as a nanozyme, induce the reaction between H₂O₂ and 3,3',5,5'-tetramethylbenzidine (TMB). Under optimal conditions, the increase is proportional to cholesterol with concentrations from 10 to 800 μM in absorbance of TMB at 652 nm. The linear range for cholesterol is 10-100 μM, with a detection limit of 3.5 μM. This reported method is successfully employed for detection of cholesterol in human serum. The recovery percentage is ranged within 96-106.9%. Furthermore, we designed a facile and simple portable assay kit using the proposed system, realizing the on-site semiquantitative and visual detection of cholesterol in human serum. The cholesterol content detected from the portable assay kit were closely matching those obtained results from solution-based assays, thereby holding great potential in clinical diagnosis and health management.

Simple and Cost-effective Enzymatic Detection of Cholesterol Using Flow Injection Analysis

A flow-injection analytical (FIA) system was developed for the determination of cholesterol concentrations based on enzymatic reactions that occurred in a cholesterol oxidase (CHO_x)-immobilized, fused-silica capillary followed by electrochemical detection. The production of hydrogen peroxide from cholesterol in an enzymatic reaction catalyzed by CHO_x was subsequently oxidized electrochemically at an electrode. Our FlA system demonstrated its cost-effectiveness and utility at an applied potential of 0.6 V (vs. Ag/AgCl), a flow rate of 100 μL/min and, under optimal conditions, the resulting signal demonstrated a linear dynamic range from 50 μM to 1.0 mM with a limit of detection (LOD) of 12.4 μM, limit of quantification (LOQ) of 44.9 μM, and the coefficient of variation of 5.17%. In addition, validation of our proposed system using a reference HDL-cholesterol kit used for clinical diagnosis suggested our FIA system was comparable to commercial kits for the determination of the cholesterol incorporation amount in various aqueous liposomal suspensions. These good analytical features achieved by FIA could make the implementation of this methodology possible for on-line monitoring of cholesterol in various types of samples.

Use of Target-Specific Liposome and Magnetic Nanoparticle Conjugation for the Amplified Detection of Norovirus

Viral diseases are one of the most life-threatening diseases as they can erupt unpredictably and spread rapidly in any medium with a very small number of particles. Therefore, the key for lethal virus detection should be highly sensitive in the early-stage detection, which can help increase the chance of survival. Amplification of the detecting signal is one of the most promising mechanisms for the detection of low-concentration analytes. A proper amplification can develop such a kind of system where a small number of particles can produce intense signals for a prominent detection. Keeping this in mind, in this report, we have presented a fluorometric method to detect norovirus (NoV) by a newly developed fluorophore-labeled liposome and a magnetically modified Fe₃O₄ combined system. Homogeneously distributed amine-functionalized liposomes have been constructed filled with a strong fluorophore of calcein. Simultaneously, (3-aminopropyl)-triethoxysilane (APTES)-functionalized Fe₃O₄ nanoparticles are also synthesized by the standard silanization process, and these two separately synthesized nanoparticles were functionalized with an antibody to achieve specificity. The Fe₃O₄ and calcein-liposome system has been applied for NoV detection, which was magnetically separated from the analyte medium and then externally burst to release the fluorophores from the core of the liposome. The easiness, rapidity, and sensitivity in a wide linear range can offer a huge potential of this method in point-of-care diagnostics.

Glypican-3 electrochemical aptamer nanobiosensor based on hemin/graphene nanohybrids peroxidase-like catalytic silver deposition

A Glypican-3 (GPC3) electrochemical aptamer nanobiosensor based on hemin/graphene nanohybrids (HGNs) peroxidase-like catalytic silver deposition and GPC3 aptamer has been constructed for the determination of GPC3. The HGNs were prepared by an one-step reduction method. Fourier transform infrared spectroscopy (FT-IR), ultraviolet spectroscopy (UV-vis), and transmission electron microscopy (TEM) were used to study the structure and morphological characteristics of the HGNs. The GPC3 electrochemical aptamer nanobiosensor was constructed using HGNs-aptamer (HGNs-Apt) as the signal probe and GPC3 aptamer as the capture probe. With the help of the catalytic action of peroxidase-like properties of HGNs, H₂O₂ reduces the silver (Ag) ions in solution to metallic Ag, which deposit on the surface of the electrode. The amount of deposited Ag, which was derived from the amount of GPC3, was quantified by differential pulse voltammetry (DPV). Under optimal conditions, the current response of Ag had a good positive correlation with the GPC3 concentration in the range 10.0-100.0 μg mL^-1 with a correlation coefficient of 0.9958. The detection limit was 3.16 μg mL^-1 at a signal-to-noise ratio of 3, and the sensitivity was calculated to be 0.807 μA μM^-1 cm^-2. The method is validated by analyzing spiked human serum samples with good recovery ranging from 101 to 122%. In addition, the GPC3 electrochemical aptamer nanobiosensor has acceptable selectivity, stability, and reproducibility. Graphical abstract A Glypican-3 electrochemical aptamer nanobiosensor based on hemin/graphene nanohybrids (HGNs) peroxidase-like catalytic silver deposition and GPC3 aptamer has been constructed for the determination of GPC3. The electrochemical aptamer nanobiosensor exhibits high selectivity, acceptance reproducibility, and good recovery performances.