Enzymatic fuel cells with an oxygen resistant variant of pyranose-2-oxidase as anode biocatalyst

A Self-Powered Enzymatic Glucose Sensor Utilizing Bimetallic Nanoparticle Composites Modified Pencil Graphite Electrodes as Cathode

Enzymatic biofuel cells (EBFC) are promising sources of green energy owing to the benefits of using renewable biofuels, eco-friendly biocatalysts, and moderate operating conditions. In this study, a simple and effective EBFC was presented using an enzymatic composite material-based anode and a nonenzymatic bimetallic nanoparticle-based cathode respectively. The anode was constructed from a glassy carbon electrode (GCE) modified with a multi-walled carbon nanotube (MWCNT) and ferrocene (Fc) as a conductive layer coupled with the enzyme glucose oxidase (GOx) as a sensitive detection layer for glucose. A chitosan layer was also applied to the electrode as a protective layer to complete the composite anode. Chronoamperometry (CA) results show that the MWCNT-Fc-GOx/GCE electrode has a linear relationship between current and glucose concentration, which varied from 1 to 10 mM. The LOD and LOQ were calculated for anode as 0.26 mM and 0.87 mM glucose, respectively. Also the sensitivity of the proposed sensor was calculated as 25.71 μ A/mM. Moreover, the studies of some potential interferants show that there is no significant interference for anode in the determination of glucose except ascorbic acid (AA), uric acid (UA), and dopamine (DA). On the other hand, the cathode consisted of a disposable pencil graphite electrode (PGE) modified with platinum-palladium bimetallic nanoparticles (Nps) which exhibit excellent conductivity and electron transfer rate for the oxygen reduction reaction (ORR). The constructed EBFC was optimized and characterized using various electroanalytical techniques. The EBFC consisting of MWCNT-Fc-GOx/GCE anode and Pt-PdNps/PGE cathode exhibits an open circuit potential of 285.0 mV and a maximum power density of 32.25 µW cm-2 under optimized conditions. The results show that the proposed EBFC consisting of an enzymatic composite-based anode and bimetallic nanozyme-based cathode is a unique design and a promising candidate for detecting glucose while harvesting power from glucose-containing natural or artificial fluids.

Recent advances in the role of biocatalyst in biofuel cells and its application: An overview

Biofuel cells have recently gained popularity as a green and renewable energy source. Biofuel cells are unique devices of energy and are capable of converting the stored chemical energy from waste materials such as pollutants, organics and wastewater into reliable, renewable, pollution-free energy sources through the action of biocatalysts such as various microorganisms and enzymes. It is a promising technological device to treat waste to compensate for global warming and the energy crisis through the green energy production process. Due to their unique properties, various potential biocatalysts are attracting researchers to apply them to various microbial biofuel cells for improving electricity and power. Recent research in biofuel cells is focusing on the exploitation of different biocatalysts and how they are enhancing power generation for various applications in the field of environmental technology, and biomedical fields such as implantable devices, testing kits, and biosensors. This review focusing the importance of microbial fuel cells (MFCs) and enzymatic fuel cells (ECFs) and role of different types of biocatalysts and their mechanisms for improving biofuel cell efficiency gathered from recent reports. Finally, its multifaceted applications with special emphasis on environmental technology and biomedical field will be described, along with future perspectives.

Carbon Nanomaterials (CNMs) and Enzymes: From Nanozymes to CNM-Enzyme Conjugates and Biodegradation

Carbon nanomaterials (CNMs) and enzymes differ significantly in terms of their physico-chemical properties-their handling and characterization require very different specialized skills. Therefore, their combination is not trivial. Numerous studies exist at the interface between these two components-especially in the area of sensing-but also involving biofuel cells, biocatalysis, and even biomedical applications including innovative therapeutic approaches and theranostics. Finally, enzymes that are capable of biodegrading CNMs have been identified, and they may play an important role in controlling the environmental fate of these structures after their use. CNMs' widespread use has created more and more opportunities for their entry into the environment, and thus it becomes increasingly important to understand how to biodegrade them. In this concise review, we will cover the progress made in the last five years on this exciting topic, focusing on the applications, and concluding with future perspectives on research combining carbon nanomaterials and enzymes.

Extracellular Oxidase from the Neonothopanus nambi Fungus as a Promising Enzyme for Analytical Applications

The extracellular enzyme with oxidase function was extracted from the Neonothopanus nambi luminescent fungus by using mild processing of mycelium with β-glucosidase and then isolated by gel-filtration chromatography. The extracted enzyme is found to be a FAD-containing protein, catalyzing phenol co-oxidation with 4-aminoantipyrine without addition of H₂O₂, which distinguishes it from peroxidases. This fact allowed us to assume that this enzyme may be a mixed-function oxidase. According to gel-filtration chromatography and SDS-PAGE, the oxidase has molecular weight of 60 kDa. The enzyme exhibits maximum activity at 55-70 °C and pH 5.0. Kinetic parameters K_m and V_max of the oxidase for phenol were 0.21 mM and 0.40 µM min^-1. We suggest that the extracted enzyme can be useful to develop a simplified biosensor for colorimetric detection of phenol in aqueous media, which does not require using hydrogen peroxide.

From Enzyme Stability to Enzymatic Bioelectrode Stabilization Processes

Bioelectrocatalysis using redox enzymes appears as a sustainable way for biosensing, electricity production, or biosynthesis of fine products. Despite advances in the knowledge of parameters that drive the efficiency of enzymatic electrocatalysis, the weak stability of bioelectrodes prevents large scale development of bioelectrocatalysis. In this review, starting from the understanding of the parameters that drive protein instability, we will discuss the main strategies available to improve all enzyme stability, including use of chemicals, protein engineering and immobilization. Considering in a second step the additional requirements for use of redox enzymes, we will evaluate how far these general strategies can be applied to bioelectrocatalysis.

Platinum nanoparticle-deposited multi-walled carbon nanotubes as a NADH oxidase mimic: characterization and applications

The effective regeneration of bioactive NAD+ plays an important role in numerous dehydrogenase-dependent applications including biocatalysis and biosensing. However, this process usually suffers from high thermodynamic barrier, instability and high cost associated with natural enzymes. The emergence of nanomaterials with enzyme mimic characteristics has offered a potential alternative to many enzyme-catalyzed processes. Platinum nanoparticles (PtNPs), for example, have been extensively studied for their peroxidase- and oxidase-like activities. However, their behavior as a NADH oxidase mimic has barely been characterized in detail. Herein, we report a facile approach for preparing PtNP-deposited multi-walled carbon nanotubes (PtNPs@MWCNTs) as the nanozyme for NADH oxidation. Its enzymatic activity was investigated in depth, revealing that it is a NADH oxidase instead of a peroxidase and the catalytic process generates O2˙-, rather than OH˙ or 1O2, from dissolved O2. The recovery yield of bioactive NAD+ regeneration by the nanozyme could reach ∼100% with a total turnover number of ∼6000. Besides, it exhibited terrific electrochemical performance for NADH oxidation and sensing by greatly boosting the response and lowering the oxidation overpotential. It could also work on biomimetic cofactors with even higher activity. Finally, xylose dehydrogenase was immobilized with the nanozyme to constitute a hybrid bioelectrode for xylose sensing. The biosensor had a xylose detecting range of 5-400 μM with the limit of detection as low as 1 μM and can retain its performance after being reused several times. Our results suggest that the PtNPs@MWCNTs characterized as a NADH oxidase nanozyme hold great promise in the applications of biocatalysis and biosensing, which intensively deal with dehydrogenases and natural or biomimetic cofactors.

Pyranose oxidase: A versatile sugar oxidoreductase for bioelectrochemical applications

Pyranose oxidase (POx) is an FAD-dependent oxidoreductase, and like glucose oxidase (GOx) it is a member of the glucose-methanol-choline (GMC) superfamily of oxidoreductases. POx oxidizes several monosaccharides including D-glucose, D-galactose, and D-xylose, while concurrently oxygen is reduced to hydrogen peroxide. In addition to this oxidase activity, POx shows pronounced activity with alternative electron acceptors that include various quinones or (complexed) metal ions. Even though POx in general shows properties that are more favourable than those of GOx (e.g., a considerably higher catalytic efficiency (k_cat/K_m) for D-glucose, significantly lower Michaelis constants K_m for D-glucose, reactivity with both anomeric forms of D-glucose) it is much less frequently used for both biosensor and biofuel cell applications than GOx. POx has been applied in biosensing of D-glucose, D-galactose, and D-xylose, and in combination with α-glucosidase also maltose. An attractive application is in biosensors constructed for the measurement of 1,5-anhydro-D-glucitol, a recognised biomarker in diabetes. Bioelectrochemical applications of POx had been restricted to enzymes of fungal origin. The recent discovery and characterisation of POx from bacterial sources, which show properties that are very distinct from the fungal enzymes, might open new possibilities for further applications in bioelectrochemistry.

Characterization of pyranose oxidase variants for bioelectrocatalytic applications

Pyranose oxidase (POx) catalyzes the oxidation of d-glucose to 2-ketoglucose with concurrent reduction of oxygen to H₂O₂. POx from Trametes ochracea (ToPOx) is known to react with alternative electron acceptors including 1,4-benzoquinone (1,4-BQ), 2,6-dichlorophenol indophenol (DCPIP), and the ferrocenium ion. In this study, enzyme variants with improved electron acceptor turnover and reduced oxygen turnover were characterized as potential anode biocatalysts. Pre-steady-state kinetics of the oxidative half-reaction of ToPOx variants T166R, Q448H, L545C, and L547R with these alternative electron acceptors were evaluated using stopped-flow spectrophotometry. Higher kinetic constants were observed as compared to the wild-type ToPOx for some of the variants. Subsequently, the variants were immobilized on glassy carbon electrodes. Cyclic voltammetry measurements were performed to measure the electrochemical responses of these variants with glucose as substrate in the presence of 1,4-BQ, DCPIP, or ferrocene methanol as redox mediators. High catalytic efficiencies (I_max^app/K_M^app) compared to the wild-type POx proved the potential of these variants for future bioelectrocatalytic applications, in biosensors or biofuel cells. Among the variants, L545C showed the most desirable properties as determined kinetically and electrochemically.

•

Pyranose oxidase (POx) shows attractive features for bioelectrocatalysis.

•

Trametes ochracea POx variant L545C is most promising for these applications.

•

Rapid kinetics experiments give good predictions for performance on an electrode.

Bioelectricity Generation by Corynebacterium glutamicum with Redox-Hydrogel-Modified Carbon Electrode

This work studied Gram-positive and weak electricigen Corynebacterium glutamicum for its ability to transfer electrons and to produce bioelectricity in microbial fuel cells (MFCs). The electrochemical and liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) results revealed that C. glutamicum had the potential to mediate electron transfer to an electrode by emitting its own extracellular electron shuttles such as flavins. To enhance the current collection from C. glutamicum, a carbon cloth anode was modified with ferrocene-branched chitosan hydrogel (redox-hydrogel). The maximum current density of the ferrocene-branched chitosan redox hydrogel anode with C. glutamicum was drastically increased to 120 µA cm−2 relative to a bare carbon cloth electrode with C. glutamicum (261 nA cm−2). The power density and polarization curves for the MFC operation with the redox-hydrogel-modified anode showed that C. glutamicum effectively generated bioelectricity by means of the redox-hydrogel anode. The results suggest that, in such an electro-fermentation process, ferrocene-branched chitosan hydrogel grafted onto an anode surface would also facilitate both electron transfer from C. glutamicum to the anode and bioelectricity generation.