Ultrasensitive colorimetric biosensor for BRCA1 mutation based on multiple signal amplification strategy

Innovative Methodologies for the Early Detection of Breast Cancer: A Review Categorized by Target Biological Samples

Innovative biosensor technologies are revolutionizing cancer detection by offering non-invasive, sensitive, and rapid diagnostic tools, addressing the limitations of conventional screening. Non-invasive samples like breath, saliva, urine, and sweat, analyzed using advanced technologies like electronic nose systems and AI, show promise for early detection and frequent monitoring, though validation is needed. AI integration enhances data analysis and personalization. While blood-based methods remain the gold standard, combining them with less invasive sample types like saliva or sweat, and using sensitive techniques, is a promising direction. Conventional methods (mammography, MRI, etc.) offer proven efficacy, but are costly and invasive. Innovative methods using biosensors offer reduced infrastructure needs, lower costs, and patient-friendly sampling. However, challenges remain in validation, standardization, and low biomarker concentrations. Integrating both methodologies could create a comprehensive framework, combining reliability with accessibility. Future research should focus on robust biosensor development, standardization, expanding application to other cancers, exploring less-studied samples like sweat, and improving affordability for wider adoption, especially in resource-limited settings. The future lies in integrating diverse approaches for more sensitive, specific, and patient-friendly screening, improving early detection and outcomes.

An electrochemical biosensor using AuNPs-Ti3C2Tx and ARGET ATRP reactions as signal amplification strategies for ultra-sensitive detection of HER2 protein

Human epidermal growth factor receptor 2 (HER2) status is an important factor in evaluating the prognosis of breast cancer patients. Therefore, it is particularly important to develop a simple and sensitive method for the detection of HER2-positive breast cancer. Here, an ultra-sensitive electrochemical biosensor for detecting HER2-specific proteins was assembled using gold nanoparticles and Two-dimensional carbides (AuNPs-Ti3C2Tx) as a conducting substrate. The prepared AuNPs-Ti3C2Tx not only has good electrical conductivity and strong electrochemical signal output, but also provides a large number of active sites for the AuS bonds assembly aptamer. In addition, the antibodies-modified functionalized graphene oxide (GO) as a carrier platform, which provides an additional boost for the detection of trace targets with high sensitivity under optimal conditions. Afterwards,HER2 protein was detected by signal amplification effect of AuNPs-Ti3C2Tx and functionalized GO combined with Electron transfer activated regeneration catalyst atomic transfer radical polymerization (ARGET ATRP). In the range of 1 to 105 ng·mL-1, there was a good linear relationship between the HER2 concentration and the signal intensity, with a limit of detection of 0.19 pg·mL-1. Moreover, this method has good selectivity and stability, and then still maintains good detection performance and strong anti-interference ability in the complex environment of normal human serum, which is expected to be applied in clinical application.

Colorimetric, Quantitative, and Portable Liquid Crystal Elastomer Biosensing of Cholesterol and Malathion

Cholesteric liquid crystal elastomers (CLCEs) possess a unique characteristic that allows the manipulation of the reflected color by adjusting the spacing between layers. This attribute can create a reliable and cost-effective colorimetric sensing platform for the on-site detection of various substances. In this study, CLCE films were coupled with cross-linked poly(acrylic acid) (CLCE-PAA) or poly(dimethylaminoethyl methacrylate) (CLCE-PDA) films to monitor cholesterol and malathion levels, respectively. In both cases, the color change is recorded by a mobile phone camera, and the reflectance wavelength is measured spectrophotometrically. For on-site detection, a smartphone application was used to capture the film's image, process the color data into hue (H) values, and calculate the corresponding concentration of the tested analyte via an analysis program. Cholesterol and malathion can be detected within a linear range of 0.2-1.0 mM and 1-10,000 ng/mL, respectively. The corresponding recoveries for actual sample analysis were 86-115% and 87-122% for cholesterol and malathion, respectively. This system offers a practical solution for on-site testing of cholesterol and malathion in biological and environmental samples.

Electrochemical biosensors for early detection of breast cancer

Breast cancer continues to be a significant contributor to global cancer deaths, particularly among women. This highlights the critical role of early detection and treatment in boosting survival rates. While conventional diagnostic methods like mammograms, biopsies, ultrasounds, and MRIs are valuable tools, limitations exist in terms of cost, invasiveness, and the requirement for specialized equipment and trained personnel. Recent shifts towards biosensor technologies offer a promising alternative for monitoring biological processes and providing accurate health diagnostics in a cost-effective, non-invasive manner. These biosensors are particularly advantageous for early detection of primary tumors, metastases, and recurrent diseases, contributing to more effective breast cancer management. The integration of biosensor technology into medical devices has led to the development of low-cost, adaptable, and efficient diagnostic tools. In this framework, electrochemical screening platforms have garnered significant attention due to their selectivity, affordability, and ease of result interpretation. The current review discusses various breast cancer biomarkers and the potential of electrochemical biosensors to revolutionize early cancer detection, making provision for new diagnostic platforms and personalized healthcare solutions.

Colorimetric detection of single-nucleotide mutations based on rolling circle amplification and G-quadruplex-based DNAzyme

In this work, we proposed a sensitive and selective colorimetric assay for single nucleotide mutation (SNM) detection combining rolling circle amplification (RCA) and G-quadruplex/hemin DNAzyme complex formation. In the detection principle, the first step involves ssDNA hybridization with a padlock probe (PLP) DNA, which can discriminate a single base mismatch. The successful ligation is followed by an RCA event to generate an abundance of G-quadruplexes (GQ-RCA) which are then transformed into a DNAzyme (G-quadruplex/hemin complex) by the addition of hemin. The color change from colorless 3,3',5,5'-tetramethylbenzidine (TMB) into colored oxTMB when hydrogen peroxide (H2O2) is added indicated the presence of a mutation. The assay had a limit of detection (LOD) of 2.14 pM. Mutations in samples from breast cancer patients were successfully detected with an accuracy of 100% when compared to Sanger sequencing results. The method is easily applicable even in resource poor setting regions given that it doesn't require any sophisticated or expensive instruments, and the signal readout is detectable simply by the naked eye. Our assay might be a useful tool for genetic analysis and clinical molecular diagnosis for breast cancer risk assessment and early detection.

A quadratic isothermal amplification fluorescent biosensor without intermediate purification for ultrasensitive detection of circulating tumor DNA

Circulating tumor DNA (ctDNA) is an auspicious tumor biomarker released into the bloodstream by tumor cells, offering abundant information concerning cancer genes. It plays a crucial role in the early diagnosis of cancer. However, due to extremely low levels in body fluids, achieving a simple, sensitive, and highly specific detection of ctDNA remains challenging. Here, we constructed a purification-free fluorescence biosensor based on quadratic amplification of ctDNA by combining nicking enzyme mediated amplification (NEMA) and catalytic hairpin assembly (CHA) reactions. After double isothermal amplification, this biosensor achieved an impressive signal amplification of nearly 107-fold, enabling it to detect ctDNA with ultra-sensitivity. And the detection limit of this biosensor is as low as 2 aM. In addition, we explored the influence of human serum on the performance of the biosensor and found that it showed favorable sensitivity in the presence of serum. This biosensor eliminates the need for an intermediate purification step, resulting in enhanced sensitivity and convenience. Thus, our purification-free fluorescent biosensor exhibits ultra-high sensitivity when compared to other biosensors and has the potential to serve as an effective diagnostic tool for early detection of cancer.

Tackling breast cancer with gold nanoparticles: twinning synthesis and particle engineering with efficacy

The World Health Organization identifies breast cancer as the most prevalent cancer despite predominantly affecting women. Surgery, hormonal therapy, chemotherapy, and radiation therapy are the current treatment modalities. Site-directed nanotherapeutics, engineered with multidimensional functionality are now the frontrunners in breast cancer diagnosis and treatment. Gold nanoparticles with their unique colloidal, optical, quantum, magnetic, mechanical, and electrical properties have become the most valuable weapon in this arsenal. Their advantages include facile modulation of shape and size, a high degree of reproducibility and stability, biocompatibility, and ease of particle engineering to induce multifunctionality. Additionally, the surface plasmon oscillation and high atomic number of gold provide distinct advantages for tailor-made diagnosis, therapy or theranostic applications in breast cancer such as photothermal therapy, radiotherapy, molecular labeling, imaging, and sensing. Although pre-clinical and clinical data are promising for nano-dimensional gold, their clinical translation is hampered by toxicity signs in major organs like the liver, kidneys and spleen. This has instigated global scientific brainstorming to explore feasible particle synthesis and engineering techniques to simultaneously improve the efficacy and versatility and widen the safety window of gold nanoparticles. The present work marks the first study on gold nanoparticle design and maneuvering techniques, elucidating their impact on the pharmacodynamics character and providing a clear-cut scientific roadmap for their fast-track entry into clinical practice.

Exploring the Potential of Sensing for Breast Cancer Detection

Breast cancer is a generalized global problem. Biomarkers are the active substances that have been considered as the signature of the existence and evolution of cancer. Early screening of different biomarkers associated with breast cancer can help doctors to design a treatment plan. However, each screening technique for breast cancer has some limitations. In most cases, a single technique can detect a single biomarker at a specific time. In this study, we address different types of biomarkers associated with breast cancer. This review article presents a detailed picture of different techniques and each technique’s associated mechanism, sensitivity, limit of detection, and linear range for breast cancer detection at early stages. The limitations of existing approaches require researchers to modify and develop new methods to identify cancer biomarkers at early stages.

Ordered Assembly of DNA on Topological Insulator Bi2Se3 and Octadecylamine for a Sensitive Biosensor

Controlling the assembly of DNA in order on a suitable electrode surface is of great significance for biosensors and disease diagnosis, but it is full of challenges. In this work, we creatively assembled DNA on the surface of octadecylamine (ODA)-modified topological insulator (Tls) Bi₂Se₃ and developed an electrochemical biosensor to detect biomarker DNA of coronavirus disease 2019 (COVID-19). A high-quality Bi₂Se₃ sheet was obtained from a single crystal synthesized in our lab. A uniform ODA layer was coated in argon by chemical vapor deposition (CVD). We observed and analyzed the assembly and mechanism of single-strand DNA (ssDNA) and double-strand DNA (dsDNA) on the Bi₂Se₃ surface through atomic force microscopy (AFM) and molecular dynamics (MD) simulations. The electrochemical signal revealed that the biosensor based on the DNA/ODA/Bi₂Se₃ electrode has a wide linear detection range from 1.0 × 10^-12 to 1.0 × 10^-8 M, with the limit of detection as low as 5 × 10^-13 M. Bi₂Se₃ has robust surface states and improves the electrochemical signal-to-noise ratio, while the uniform ODA layer guides high-density ordered DNA, enhancing the sensitivity of the biosensor. Our work demonstrates that the ordered DNA/ODA/Bi₂Se₃ electrode surface has great application potential in the field of biosensing and disease diagnosis.

Sensitive biosensors based on topological insulator Bi2Se3 and peptide

In this work, we designed a facile and label-free electrochemical biosensor based on intrinsic topological insulator (TI) Bi₂Se₃ and peptide for the detection of immune checkpoint molecules. With topological protection, Bi₂Se₃ could have robust surface states with low electronic noise, which was beneficial for the stable and sensitive electron transport between electrode and electrolyte interface. The peptides are easily synthesized and chemically modified, and have good biocompatibility and bioavailability, which is a suitable candidate as the recognition units for immune checkpoint molecules. Therefore, the peptide/Bi₂Se₃ was developed as a suitable working electrode for the electrochemical biosensor. The basic performance of the designed peptide/Bi₂Se₃ biosensor was investigated to determine the Anti-HA Tag Antibody and PD-L1 molecules. The linear detection range was from 3.6 × 10^-10 mg mL^-1 to 3.6 × 10^-5 mg mL^-1, and the detection limit was 1.07 × 10^-11 mg mL^-1. Moreover, the biosensor also displayed good selectivity and stability.

Gold Nanoparticles as a Biosensor for Cancer Biomarker Determination

Molecular biology applications based on gold nanotechnology have revolutionary impacts, especially in diagnosing and treating molecular and cellular levels. The combination of plasmonic resonance, biochemistry, and optoelectronic engineering has increased the detection of molecules and the possibility of atoms. These advantages have brought medical research to the cellular level for application potential. Many research groups are working towards this. The superior analytical properties of gold nanoparticles can not only be used as an effective drug screening instrument for gene sequencing in new drug development but also as an essential tool for detecting physiological functions, such as blood glucose, antigen-antibody analysis, etc. The review introduces the principles of biomedical sensing systems, the principles of nanomaterial analysis applied to biomedicine at home and abroad, and the chemical surface modification of various gold nanoparticles.

Advancement in Analytical Techniques for Determining the Activity of β-Site Amyloid Precursor Protein Cleaving Enzyme 1

Alzheimer's disease (AD) is a degenerative disease of the central nervous system. The pathogenesis is still not fully clear. One of the main histopathological manifestations is senile plaques formed by β-amyloid (Aβ) accumulation. Aβ is generated from the sequential proteolysis of amyloid precursor protein (APP) by β-secretase [i.e. β-site APP cleaving enzyme 1 (BACE1)] and γ-secretase, with a rate-limiting step controlled by BACE1 activity. Therefore, inhibiting BACE1 activity has become a potential therapeutic strategy for AD. The development of reliable detection methods for BACE1 activity plays an important role in early diagnosis of AD and evaluation of the therapeutic effect of new drugs for AD. This article has reviewed the recent advances in BACE1 activity detection techniques. The challenges of applying these analysis techniques to early clinical diagnosis of AD and development trends of the detection techniques have been prospected.

Gold nanoparticle-based optical nanosensors for food and health safety monitoring: recent advances and future perspectives

Modern society has been facing serious health-related problems including food safety, diseases and illness. Hence, it is urgent to develop analysis methods for the detection and control of food contaminants, disease biomarkers and pathogens. As the traditional instrumental methods have several disadvantages, including being time consuming, and having high cost and laborious procedures, optical nanosensors have emerged as promising alternative or complementary approaches to those traditional ones. With the advantages of simple preparation, high surface-to-volume ratio, excellent biocompatibility, and especially, unique optical properties, gold nanoparticles (AuNPs) have been demonstrated as excellent transducers for optical sensing systems. Herein, we provide an overview of the synthesis of AuNPs and their excellent optical properties that are ideal for the development of optical nanosensors based on local surface plasmon resonance (LSPR), colorimetry, fluorescence resonance energy transfer (FRET), and surface-enhanced Raman scattering (SERS) phenomena. We also review the sensing strategies and their mechanisms, as well as summarizing the recent advances in the monitoring of food contaminants, disease biomarkers and pathogens using developed AuNP-based optical nanosensors in the past seven years (2015-now). Furthermore, trends and challenges in the application of these nanosensors in the determination of those analytes are discussed to suggest possible directions for future developments.

Multifunctional carbon nanomaterials for diagnostic applications in infectious diseases and tumors

Infectious diseases (such as Corona Virus Disease 2019) and tumors pose a tremendous challenge to global public health. Early diagnosis of infectious diseases and tumors can lead to effective control and early intervention of the patient's condition. Over the past few decades, carbon nanomaterials (CNs) have attracted widespread attention in different scientific disciplines. In the field of biomedicine, carbon nanotubes, graphene, carbon quantum dots and fullerenes have the ability of improving the accuracy of the diagnosis by the improvement of the diagnostic approaches. Therefore, this review highlights their applications in the diagnosis of infectious diseases and tumors over the past five years. Recent advances in the field of biosensing, bioimaging, and nucleic acid amplification by such CNs are introduced and discussed, emphasizing the importance of their unique properties in infectious disease and tumor diagnosis and the challenges and opportunities that exist for future clinical applications. Although the application of CNs in the diagnosis of several diseases is still at a beginning stage, biosensors, bioimaging technologies and nucleic acid amplification technologies built on CNs represent a new generation of promising diagnostic tools that further support their potential application in infectious disease and tumor diagnosis.

A Review of Biosensors for Detecting Tumor Markers in Breast Cancer

Breast cancer has the highest cancer incidence rate in women. Early screening of breast cancer can effectively improve the treatment effect of patients. However, the main diagnostic techniques available for the detection of breast cancer require the corresponding equipment, professional practitioners, and expert analysis, and the detection cost is high. Tumor markers are a kind of active substance that can indicate the existence and growth of the tumor. The detection of tumor markers can effectively assist the diagnosis and treatment of breast cancer. The conventional detection methods of tumor markers have some shortcomings, such as insufficient sensitivity, expensive equipment, and complicated operations. Compared with these methods, biosensors have the advantages of high sensitivity, simple operation, low equipment cost, and can quantitatively detect all kinds of tumor markers. This review summarizes the biosensors (2013-2021) for the detection of breast cancer biomarkers. Firstly, the various reported tumor markers of breast cancer are introduced. Then, the development of biosensors designed for the sensitive, stable, and selective recognition of breast cancer biomarkers was systematically discussed, with special attention to the main clinical biomarkers, such as human epidermal growth factor receptor-2 (HER2) and estrogen receptor (ER). Finally, the opportunities and challenges of developing efficient biosensors in breast cancer diagnosis and treatment are discussed.

Molybdenum Disulfide-Based Nanoprobes: Preparation and Sensing Application

The use of nanoprobes in sensors is a popular way to amplify their analytical performance. Coupled with two-dimensional nanomaterials, nanoprobes have been widely used to construct fluorescence, electrochemical, electrochemiluminescence (ECL), colorimetric, surface enhanced Raman scattering (SERS) and surface plasmon resonance (SPR) sensors for target molecules' detection due to their extraordinary signal amplification effect. The MoS₂ nanosheet is an emerging layered nanomaterial with excellent chemical and physical properties, which has been considered as an ideal supporting substrate to design nanoprobes for the construction of sensors. Herein, the development and application of molybdenum disulfide (MoS₂)-based nanoprobes is reviewed. First, the preparation principle of MoS₂-based nanoprobes was introduced. Second, the sensing application of MoS₂-based nanoprobes was summarized. Finally, the prospect and challenge of MoS₂-based nanoprobes in future were discussed.

Design of a Ratiometric Plasmonic Biosensor for Herceptin Detection in HER2-Positive Breast Cancer

Breast cancer is the most common cause of cancer death in women; therefore, its early detection and treatment are crucial. To achieve this goal, we designed an optical sensor based on direct interaction of trastuzumab [Herceptin (HER)], a monoclonal antibody used to treat HER2-positive breast cancer, with plasmonic nanoparticles. Surface-modified gold nanoparticles (AuNPs) have gained considerable attention in biosensing techniques over the last years, which actuated these nanoparticles to the heart of various biosensing notions. We have exploited the localized surface plasmon resonance (LSPR) of gold nanoparticles to determine HER in human serum. AuNPs were decorated with negatively charged citrate ions, yielding enhanced direct-surface interaction with HER antibodies. The AuNPs are mixed with silver nanoparticles (AgNPs) in an optimized ratio to increase selectivity and sensitivity further. AuNPs detect the HER antibodies using LSPR, whereas AgNPs help monitor interferences' effect on the sensing media. The three effective factors in HER sensing, including the nanoparticle ratio, temperature, and pH were optimized via response surface methodology (RSM) based on the central composite design (CCD). The sensor's response toward HER was achieved in the linear range of 0.5 × 10^-7 to 40 × 10^-7 M with the detection limit of 3.7 × 10^-9 M and relative standard deviation (RSD) less than 5%. The selectivity of the LSPR sensor was assessed by monitoring its response toward HER in the presence of other biological molecules with similar physicochemical properties. Rapid response time (less than 1 min), selectivity, and the simplicity of the developed LSPR-based sensor are the key advantages of the developed sensor.

Recent Progress in DNA Hybridization Chain Reaction Strategies for Amplified Biosensing

With the continuous development of DNA nanotechnology, various spatial DNA structures and assembly techniques emerge. Hybridization chain reaction (HCR) is a typical example with exciting features and bright prospects in biosensing, which has been intensively investigated in the past decade. In this Spotlight on Applications, we summarize the assembly principles of conventional HCR and some novel forms of linear/nonlinear HCR. With advantages like great assembly kinetics, facile operation, and an enzyme-free and isothermal reaction, these strategies can be integrated with most mainstream reporters (e.g., fluorescence, electrochemistry, and colorimetry) for the ultrasensitive detection of abundant targets. Particularly, we select several representative studies to better illustrate the novel ideas and performances of HCR strategies. Theoretical and practical utilities are confirmed for a range of biosensing applications. In the end, a deep discussion is provided about the challenges and future tasks of this field.