Surface plasmon resonance biosensors for detection of Alzheimer's biomarkers; an effective step in early and accurate diagnosis

Strategies for measuring concentrations and forms of amyloid-β peptides

Alzheimer's disease (AD) is affecting more and more people worldwide without the effective treatment, while the existed pathological mechanism has been confirmed barely useful in the treatment. Amyloid-β peptide (Aβ), a main component of senile plaque, is regarded as the most promising target in AD treatment. Aβ clearance from AD brain seems to be a reliably therapeutic strategy, as the two exited drugs, GV-971 and aducanumab, are both developed based on it. However, doubt still exists. To exhaustive expound on the pathological mechanism of Aβ, rigorous analyses on the concentrations and aggregation forms are essential. Thus, it is attracting broad attention these years. However, most of the sensors have not been used in pathological studies, as the lack of the bridge between analytical chemist and pathologists. In this review, we made a brief introduce on Aβ-related pathological mechanism included in β-amyloid hypothesis to elucidate the detection conditions of sensor methods. Furthermore, a summary of the sensor methods was made, which were based on Aβ concentrations and form detections that have been developed in the past 10 years. As the greatest number of the sensors were built on fluorescent spectroscopy, electrochemistry, and Roman spectroscopy, detailed elucidation on them was made. Notably, the aggregation process is another important factor in revealing the progress of AD and developing the treatment methods, so the sensors on monitoring Aβ aggregation processes were also summarized.

Advancements in Cerebrospinal Fluid Biosensors: Bridging the Gap from Early Diagnosis to the Detection of Rare Diseases

Cerebrospinal fluid (CSF) is a body fluid that can be used for the diagnosis of various diseases. However, CSF collection requires an invasive and painful procedure called a lumbar puncture (LP). This procedure is applied to any patient with a known risk of central nervous system (CNS) damage or neurodegenerative disease, regardless of their age range. Hence, this can be a very painful procedure, especially in infants and elderly patients. On the other hand, the detection of disease biomarkers in CSF makes diagnoses as accurate as possible. This review aims to explore novel electrochemical biosensing platforms that have impacted biomedical science. Biosensors have emerged as techniques to accelerate the detection of known biomarkers in body fluids such as CSF. Biosensors can be designed and modified in various ways and shapes according to their ultimate applications to detect and quantify biomarkers of interest. This process can also significantly influence the detection and diagnosis of CSF. Hence, it is important to understand the role of this technology in the rapidly progressing field of biomedical science.

Ultrasensitive and Multiple Biomarker Discrimination for Alzheimer's Disease via Plasmonic & Microfluidic Sensing Technologies

As the population ages, the worldwide prevalence of Alzheimer's disease (AD) as the most common dementia in the elderly is increasing dramatically. However, a long-term challenge is to achieve rapid and accurate early diagnosis of AD by detecting hallmarks such as amyloid beta (Aβ42). Here, a multi-channel microfluidic-based plasmonic fiber-optic biosensing platform is established for simultaneous detection and differentiation of multiple AD biomarkers. The platform is based on a gold-coated, highly-tilted fiber Bragg grating (TFBG) and a custom-developed microfluidics. TFBG excites a high-density, narrow-cladding-mode spectral comb that overlaps with the broad absorption of surface plasmons for high-precision interrogation, enabling ultrasensitive monitoring of analytes. In situ detection and in-parallel discrimination of different forms of Aβ42 in cerebrospinal fluid (CSF) are successfully demonstrated with a detection of limit in the range of ≈30-170 pg mL-1, which is one order of magnitude below the clinical cut-off level in AD onset, providing high detection sensitivity for early diagnosis of AD. The integration of the TFBG sensor with multi-channel microfluidics enables simultaneous detection of multiple biomarkers using sub-µL sample volumes, as well as combining initial binding rate and real-time response time to differentiate between multiple biomarkers in terms of binding kinetics. With the advantages of multi-parameter, low consumption, and highly sensitive detection, the sensor represents an urgently needed potentials for large-scale diagnosis of diseases at early stage.

Highly efficient, label free, ultrafast plasmonic SERS biosensor (silver nanoarrays/Si) to detect GJB2 gene expressed deafness mutations in real time validated with PCR studies

Rapid diagnostics of any gene mutations related to organ loss is highly demanded now-a days to consume time as well to reduce cost. Currently, Surface enhanced Raman spectroscopy (SERS) is evolved to be a rapid investigating tool to screen gene mutations down to single molecule sensing with regard to the design and development of substrates used for sensing. The current research focuses on particular towards direct detection of deafness mutations associated with single and dual sites related to GJB2 gene. SERS Sensor construction is achieved with plasmonic silver nanoarrays on Si (SNA/Si) substrate by effortless wet chemical methods (Reaction time: 35 s; Concentration: 20 mM). The fabricated SNA/Si facilitates direct sensing of the deafness mutations of GJB2 gene in single as well dual sites with the enhancement of plasmonic hotspots. Normal DNA DMF-33 (GGGGGG) as well as Mutant DNA at single site DMF-9 (GGGGG) were validated by their guanine fingerprint Raman bands intensity quenching for mutant DNA DMF-9 at 1366 cm-1 and 1595 cm-1 respectively. Likewise, double mutations in DMF-19 are substitutional from G to A, portrayed highly intense fingerprint of Adenine Raman bands at 739 cm-1, 1432 cm-1, 1572 cm-1 in comparison to normal DNA (DMF-33). The findings were well analyzed with Raman mapping data which carries almost 625 scans for each DNA sample. The fabricated sensor exhibited the highest sensitivity towards DNA detection down to 0.1 pg/μL with utmost reproducibility. The current study aims to bring in creation of library files for deafness mutations to facilitate clinical diagnostics in a simple and rapid approach.

Antibody Profiling: Kinetics with Native Biomarkers for Diagnostic Assay and Drug Developments

Despite remarkable progress in applied Surface Plasmon Resonance (SPR)-based methods, concise monitoring of kinetic properties for native biomarkers from patient samples is still lacking. Not only are low concentrations of native targets in patient samples, often in the pM range, a limiting and challenging factor, but body fluids as complex matrices furthermore complicate measurements. The here-described method enables the determination of kinetic constants and resulting affinities for native antigens from patients' cerebrospinal fluid (CSF) and sera binding to antibodies. Using a significantly extended target-enrichment step, we modified a common sandwich-assay protocol, based on a primary and secondary antibody. We successfully analyze antibody kinetics of native targets from a variety of origins, with consistent results, independent of their source. Moreover, native neurofilament light chain (NFL) was investigated as an exemplary biomarker. Obtained data reveal antibodies recognizing recombinant NFL with high affinities, while showing no, or only significantly weakened binding to native NFL. The indicated differences for recombinant vs. native material demonstrate another beneficial application. Our assay is highly suitable for gaining valuable insights into characteristics of native biomarkers, thus impacting on the binder development of diagnostic reagents or pharmaceutical drugs.

Surface plasmonic biosensors: principles, designs and applications

Recently, surface plasmon resonance (SPR) biosensors have been widely used in environmental monitoring, food contamination detection and diagnosing medical conditions due to their superior sensitivity, label-free detection and rapid analysis speed. This paper briefly elaborates on the development history of SPR technology and introduces SPR signal sensing principles. A summary of recent applications of SPR sensors in different fields is highlighted, including their figures of merit and limitations. Finally, the personal perspectives and future development trends about sensor preparation and design are discussed in detail, which may be critical for improving the performance of SPR sensors.

Biomarkers and optical based biosensors in cardiac disease detection: early and accurate diagnosis

Rapid and precise detection methods for the early-stage detection of cardiovascular irregularities are crucial to stopping and reducing their development. Cardiovascular diseases (CVDs) are the leading cause of death in the world. Hence, cardiac-related biomarkers are essential for monitoring and managing of process. The necessity for biomarker detection has significantly widened the field of biosensor development. Bio-sensing methods offer rapid detection, low cost, sensitivity, portability, and selectivity in the development of devices for biomarker detection. For the prediction of cardiovascular diseases, some biomarkers can be used, like C-reactive protein (CRP), troponin I or T, creatine kinase (CK-MB), B-type natriuretic peptide (BNP), myoglobin (Mb), suppression of tumorigenicity 2 protein (ST2) and galectin-3 (Gal3). In this review, recent research studies were covered for gaining insight into utilizing optical-based biosensors, including surface plasmon resonance (SPR), photonic crystals (PCs), fluorescence-based techniques, fiber optics, and also Raman spectroscopy biosensors for the ultrasensitive detection of cardiac biomarkers. The main goal of this review is to focus on the improvement of optical biosensors in the future for the diagnosis of heart diseases and to discuss how to enhance their properties for use in medicine. Some main data from each study reviewed are emphasized, including the CVD biomarkers and the response range of the optical-based devices and biosensors.

Platinum-alginate-chitosan nanobioconjugate decorated carbon backbone layered biosensor for highly sensitive and selective detection of BACE-1

Chitosan (CS) and sodium alginates (SA) have been revealed for the design of layer-by-layer (LbL) assembly to develop pharmaceutical dosage forms owing to their versatile characteristics. Recently, the preference for unique LbL assemblies in biosensor development has offered the modified performance for detection interest analyte. Beta (β)-site amyloid precursor protein-cleaving enzyme 1 (BACE-1) is a pivotal biomarker of Alzheimer's disease (AD) and demands high sensitivity and selective identification for the early-stage diagnosis. In this work, CS-SA‑platinum nanoparticles (Pt-NPs) LbL-based nanobioconjugate decorated carbon backbone-layered affinity surface plasmon resonance (Anti-BACE-1-LbL@Pt-NPs-GO-SPR) biosensor was designed for extremely sensitive and selective sensing of BACE-1. Primarily, LbL nanobioconjugate was synthesized by integrating cationic 'CS' and anionic 'SA' on the face of green-made Pt-NPs. Here, the amines of 'CS' offers a softer surface for anti-BACE-1 immobilization that leads to maintaining the bio-functionality of bioreceptors, provides the specific orientation for bioreceptors, etc. As well, the synthesized graphene oxide (GO, 2D carbon backbone) was preferred as non-plasmonic nanomaterials due to their plenty of merits in biosensors. Here, the designed biosensor provides a low detection limit (LOD) of 5.63 fg/mL and a wide linear range from 5 fg/mL to 150 ng/mL. Moreover, selectivity and real-time analyses in spiked samples exhibited their practical usefulness in complex specimens for BACE-1 detection. Hence, the decorating of antibody-immobilized CS-SA coated Pt-NPs nanobioconjugate on the face of GO has various benefits mainly extremely sensitive and superb specificity. Overall, CS and SA coated Pt-NPs bioconjugate decorated GO layered SPR biosensors can provide highly sensitive, selectivity, rapid, label-free, etc. detection of BACE-1 in clinical samples.

Electrochemical Immunosensors Developed for Amyloid-Beta and Tau Proteins, Leading Biomarkers of Alzheimer's Disease

Alzheimer's disease (AD) is the most common neurological disease and a serious cause of dementia, which constitutes a threat to human health. The clinical evidence has found that extracellular amyloid-beta peptides (Aβ), phosphorylated tau (p-tau), and intracellular tau proteins, which are derived from the amyloid precursor protein (APP), are the leading biomarkers for accurate and early diagnosis of AD due to their central role in disease pathology, their correlation with disease progression, their diagnostic value, and their implications for therapeutic interventions. Their detection and monitoring contribute significantly to understanding AD and advancing clinical care. Available diagnostic techniques, including magnetic resonance imaging (MRI) and positron emission tomography (PET), are mainly used to validate AD diagnosis. However, these methods are expensive, yield results that are difficult to interpret, and have common side effects such as headaches, nausea, and vomiting. Therefore, researchers have focused on developing cost-effective, portable, and point-of-care alternative diagnostic devices to detect specific biomarkers in cerebrospinal fluid (CSF) and other biofluids. In this review, we summarized the recent progress in developing electrochemical immunosensors for detecting AD biomarkers (Aβ and p-tau protein) and their subtypes (AβO, Aβ_(1-40), Aβ_(1-42), t-tau, cleaved-tau (c-tau), p-tau₁₈₁, p-tau₂₃₁, p-tau₃₈₁, and p-tau₄₄₁). We also evaluated the key characteristics and electrochemical performance of developed immunosensing platforms, including signal interfaces, nanomaterials or other signal amplifiers, biofunctionalization methods, and even primary electrochemical sensing performances (i.e., sensitivity, linear detection range, the limit of detection (LOD), and clinical application).

A New Optical Interferometric Biosensing System Enhanced with Nanoparticles for Alzheimer's Disease in Serum

In this scientific work, we demonstrate, for the first time, a new biosensing system and procedure to measure specifically the total Tau (T-Tau) protein in serum, one of the most relevant biomarkers of Alzheimer's disease (AD). AD is a progressive brain disorder that produces neuronal and cognitive dysfunction and affects a high percentage of people worldwide. For this reason, diagnosing AD at the earliest possible stage involves improving diagnostic systems. We report on the use of interferometric bio-transducers integrated with 65 microwells forming diagnostic KITs read-out by using the Interferometric Optical Detection Method (IODM). Moreover, biofunctionalized silicon dioxide (SiO₂) nanoparticles (NPs) acting as interferometric enhancers of the bio-transducers signal allow for the improvement of both the optical read-out signal and its ability to work with less-invasive biological samples such as serum instead of cerebrospinal fluid (CSF). As a result, in this paper, we describe for the first time a relevant diagnostic alternative to detect Tau protein at demanding concentrations of 10 pg/mL or even better, opening the opportunity to be used for detecting other relevant AD-related biomarkers in serum, such as β-amyloid and phosphorylated Tau (P-Tau), neurofilaments, among others that can be considered relevant for AD.

Recent advances in isolation and detection of exosomal microRNAs related to Alzheimer's disease

Alzheimer's disease, a progressive neurological condition, is associated with various internal and external risk factors in the disease's early stages. Early diagnosis of Alzheimer's disease is essential for treatment management. Circulating exosomal microRNAs could be a new class of valuable biomarkers for early Alzheimer's disease diagnosis. Different kinds of biosensors have been introduced in recent years for the detection of these valuable biomarkers. Isolation of the exosomes is a crucial step in the detection process which is traditionally carried out by multi-step ultrafiltration. Microfluidics has improved the efficiency and costs of exosome isolation by implementing various effects and forces on the nano and microparticles in the microchannels. This paper reviews recent advancements in detecting Alzheimer's disease related exosomal microRNAs based on methods such as electrochemical, fluorescent, and SPR. The presented devices' pros and cons and their efficiencies compared with the gold standard methods are reported. Moreover, the application of microfluidic devices to detect Alzheimer's disease related biomarkers is summarized and presented. Finally, some challenges with the performance of novel technologies for isolating and detecting exosomal microRNAs are addressed.

Nanostructured surface plasmon resonance sensors: Toward narrow linewidths

Surface plasmon resonance sensors have found wide applications in optical sensing field due to their excellent sensitivity to the slight refractive index change of surrounding medium. However, the intrinsically high optical losses in metals make it nontrivial to obtain narrow resonance spectra, which greatly limits the performance of surface plasmon resonance sensors. This review first introduces the influence factors of plasmon linewidths of metallic nanostructures. Then, various approaches to achieve narrow resonance linewidths are summarized, including the fabrication of nanostructured surface plasmon resonance sensors supporting surface lattice resonance/plasmonic Fano resonance or coupling with a photonic cavity, the preparation of surface plasmon resonance sensors with ultra-narrow resonators, as well as strategies such as platform-induced modification, alternating different dielectric layers, and the coupling with whispering-gallery-modes. Lastly, the applications and some existing challenges of surface plasmon resonance sensors are discussed. This review aims to provide guidance for the further development of nanostructured surface plasmon resonance sensors.

Hybrid gold-silica nanoparticles for plasmonic applications: A comparison study of synthesis methods for increasing gold coverage

The current work focuses on the synthesis of hybrid nanoparticles (NPs) made of a silica core (Si NPs) coated with discrete gold nanoparticles (Au NPs), which exhibit localized surface plasmon resonance (LSPR) properties. This plasmonic effect is directly related to the nanoparticles size and arrangement. In this paper, we explore a wide range of size for the silica cores (80, 150, 400, and 600 nm) and for the gold NPs (8, 10, and 30 nm). Some rational comparison between different functionalization techniques and different synthesis methods for the Au NPs are proposed, related to the optical properties and colloidal stability in time. An optimized, robust and reliable synthesis route is established, which improves the gold density and homogeneity. The performances of these hybrid nanoparticles are evaluated in order to be used in the shape of a dense layer for pollutant detection in gas or liquids, and find numerous applications as a cheap and new optical device.

Label-free and selective cholesterol detection based on multilayer functional structure coated fiber fabry-perot interferometer probe

A reflective fiber-optic Fabry-Perot cavity probe sensor is proposed to selectively measure cholesterol concentration by insert single mode fiber into ceramic tube and immobilize epoxy resin (ER)/graphene oxide (GO)/beta-cyclodextrin (β-CD) multi-layer film onto end face of ceramic tube. EDC/NHS activated GO is selected to form chemical binding with β-CD, and β-CD is the sensitive materials to bind with cholesterol molecules. With multi-layer film assisted, the sensitivity of sensor to cholesterol concentration can reach 3.92 nm/mM and the limit of detection reaches 3.48 μ M. In addition, 4 mM hemoglobin, glucose and ascorbic acid are doped into a set cholesterol sample and verified the highly selectivity of sensing cholesterol. Furthermore, the reproducibility was proved by measure the spectrum of four sensors with same fabrication process, and the reusability was also proved by repeated measurements. Overall, the sensor features with high mechanical strength, ease of fabrication, real-time monitoring, low cost and ease for measurement that given by probe structure. Therefore, the sensor provides a remarkable analytical platform for biosensing applications.

Competitive fluorescent immunoassay for the ultrasensitive determination of amyloid beta peptide1-42 based on Ag@SiO2@N, S-GQD nanocomposites

A competitive fluorescent immunoassay is described for the ultrasensitive determination of amyloid beta peptide1-42 (Aβ1-42), a biomarker for early diagnosis of Alzheimer's disease. N, S-doped graphene quantum dots (N, S-GQDs) were freely assembled on the surface of Ag@SiO₂ nanoparticles to obtain a composite (Ag@SiO₂@N, S-GQD nanocomposite), which was successfully prepared and characterized. By theoretical study, the optical properties of nanocomposites are improved compared with GQDs, due to the advantages of combining N, S co-doping and metal-enhanced fluorescence (MEF) effect of Ag NPs. In addition, Aβ1-42 was modified by Ag@SiO₂@N, S-GQDs to prepare a probe with high photoluminescence properties (Ag@SiO₂@N, S-GQDs-Aβ1-42). In the presence of Aβ1-42, a competitive reaction towards anti-Aβ1-42 fixed on the ELISA plate was proceeded between Aβ1-42 and Ag@SiO₂@N, S-GQDs-Aβ1-42 by specific capture of antigen-antibody. The emission peak of Ag@SiO₂@N, S-GQDs-Aβ1-42 (400 nm emission) was used for the quantitative determination of Aβ1-42. Under the optimal conditions, the fluorescent immunoassay exhibited a linear range of 0.32 pg·mL^-1-5 ng·mL^-1 with a detection limit of 0.098 pg·mL^-1. The results show that the immunoassay has good analytical ability and can provide a new method for the clinical determination of Aβ1-42.

Strategies for Surface Design in Surface Plasmon Resonance (SPR) Sensing

Surface plasmon resonance (SPR) comprises several surface-sensitive techniques that enable the trace and ultra-trace detection of various analytes through affinity pairing. Although enabling label-free, sensitive detection and real-time monitoring, several issues remain to be addressed, such as poor stability, non-specific adsorption and the loss of operational activity of biomolecules. In this review, the progress over sensor modification, immobilization techniques and novel 2D nanomaterials, gold nanostructures and magnetic nanoparticles for signal amplification is discussed. The advantages and disadvantages of each design strategy will be provided together with some of the recent achievements.

Surface Plasmon Resonance (SPR) Sensor for Cancer Biomarker Detection

A biomarker is a physiological observable marker that acts as a stand-in and, in the best-case scenario, forecasts a clinically significant outcome. Diagnostic biomarkers are more convenient and cost-effective than directly measuring the ultimate clinical outcome. Cancer is among the most prominent global health problems and a major cause of morbidity and death globally. Therefore, cancer biomarker assays that are trustworthy, consistent, precise, and verified are desperately needed. Biomarker-based tumor detection holds a lot of promise for improving disease knowledge at the molecular scale and early detection and surveillance. In contrast to conventional approaches, surface plasmon resonance (SPR) allows for the quick and less invasive screening of a variety of circulating indicators, such as circulating tumor DNA (ctDNA), microRNA (miRNA), circulating tumor cells (CTCs), lipids, and proteins. With several advantages, the SPR technique is a particularly beneficial choice for the point-of-care identification of biomarkers. As a result, it enables the timely detection of tumor markers, which could be used to track cancer development and suppress the relapse of malignant tumors. This review emphasizes advancements in SPR biosensing technologies for cancer detection.

Advanced Overview of Biomarkers and Techniques for Early Diagnosis of Alzheimer's Disease

The development of early non-invasive diagnosis methods and identification of novel biomarkers are necessary for managing Alzheimer's disease (AD) and facilitating effective prognosis and treatment. AD has multi-factorial nature and involves complex molecular mechanism, which causes neuronal degeneration. The primary challenges in early AD detection include patient heterogeneity and lack of precise diagnosis at the preclinical stage. Several cerebrospinal fluid (CSF) and blood biomarkers have been proposed to show excellent diagnosis ability by identifying tau pathology and cerebral amyloid beta (Aβ) for AD. Intense research endeavors are being made to develop ultrasensitive detection techniques and find potent biomarkers for early AD diagnosis. To mitigate AD worldwide, understanding various CSF biomarkers, blood biomarkers, and techniques that can be used for early diagnosis is imperative. This review attempts to provide information regarding AD pathophysiology, genetic and non-genetic factors associated with AD, several potential blood and CSF biomarkers, like neurofilament light, neurogranin, Aβ, and tau, along with biomarkers under development for AD detection. Besides, numerous techniques, such as neuroimaging, spectroscopic techniques, biosensors, and neuroproteomics, which are being explored to aid early AD detection, have been discussed. The insights thus gained would help in finding potential biomarkers and suitable techniques for the accurate diagnosis of early AD before cognitive dysfunction.

Chitosan/luminol/AgNPs nanocomposite for electrochemiluminescent determination of prostate-specific antigen

A green, environmentally friendly protocol was developed for ultrasensitive and highly specific recognition of prostate-specific antigen (PSA) based on the ECL effect of luminol supported by chitosan-silver nanoparticles (CS/AgNPs) nanocomposites. The transducing surface was fabricated through two consecutive electrodeposition steps of gold nanoparticles (AuNPs) and chitosan (CS)-AgNPs-luminol electrochemiluminophore onto the glassy carbon electrode. In addition to an appropriate desirable biocompatibility, the electrochemical synthesis presents low-cost preparation and ultrafast determination opportunity. AgNPs play a linking role to attach luminol, as an ECL agent to the CS support via donor-acceptor bonds between Ag atoms with NH groups of luminol and CS. Also, AgNPs can amplify the ECL intensity as a consequence of their excellent specific surface area and conductivity. To enhance the performance of the nanobiosensor, AuNPs were also used due to their high-specific surface area and excellent affinity toward amine groups of CS. Based on this high-performance analysis strategy, ultrasensitive screening of PSA was attained with a desirable limit of detection of 0.6 ng mL^-1 and a broad linear range between 1 pg mL^-1 and 10 ng⋅mL^-1 (R²=0.994). Approximately, the same results were recorded for the analysis of the unprocessed serum samples of patients with prostate cancer at different stages. This research provided significant insight into electrografting methods to construct ECL transducers for clinical monitoring of PSA and other tumor biomarkers in the clinical setting.

pH Programmed Optical Sensor Arrays for Cancer Plasma Straightforward Discrimination Based on Protein-Responsive Patterns

Optical cross-reactive sensor arrays inspired by the mammalian olfactory system that can realize straightforward discrimination of plasma from cancer patients hold great potential for point-of-care diseases diagnostics. Herein, a pH programmed fluorescence sensor array based on protein-responsive patterns was designed for straightforward discrimination of different types of cancer plasma. It is worth noting that plasma discrimination can be realized only by programming one nanomaterial using different pH values, which greatly simplifies the programmable design of the sensor array, making it an important highlight of this work. In addition, the mechanism of the pH programmed fluorescence sensor array for protein responsiveness was systematically investigated through molecular docking simulation, fluorescence resonance energy transfer (FRET), and fluorescence lifetime experiments. Most importantly, not only can the differences between plasma from healthy people and and from patients with different cancer species including gastric cancer, liver cancer, breast cancer, and cervical cancer be discriminated by this pH programmed fluorescence sensor array, but also the blind test of unknown plasma samples can be well identified with 100% accuracy, indicating its promising prospect in clinical application.

Directivity-Enhanced Detection of a Single Nanoparticle Using a Plasmonic Slot Antenna

In situ refractive index sensors integrated with nanoaperture-based optical tweezers possess stable and sensitive responsivity to single nanoparticles. In most existing works, detection events are only identified using the total light intensity with directivity information ignored, leading to a low signal-to-noise ratio. Here, we propose to detect an optically trapped 20 nm silica particle by monitoring directivity of a plasmonic antenna. The main and secondary radiation lobes of the antenna reverse upon trapping because the particle-induced perturbation negates the relative phase between two antenna elements, leading to a significant change of the antenna front-to-back ratio. As a result, we obtain a signal-to-noise ratio of 20, with an order-of-magnitude improvement as compared to the intensity-only detection scheme.

How to Assess the Measurement Performance of Mobile/Wearable Point-of-Care Testing Devices? A Systematic Review Addressing Sweat Analysis

Recent advances in technologies for biosensor integration in mobile or wearable devices have highlighted the need for the definition of proper validation procedures and technical standards that enable testing, verification and validation of the overall performance of these solutions. Thus, reliable assessment—in terms of limits of detection/quantitation, linearity, range, analytical and diagnostic sensitivity/specificity, accuracy, repeatability, reproducibility, cross-reactivity, diagnostic efficiency, and positive/negative prediction—still represents the most critical and challenging aspect required to progress beyond the status of feasibility studies. Considering this picture, this work aims to review and discuss the literature referring to the available methods and criteria reported in the assessment of the performance of point-of-care testing (PoCT) devices within their specific applications. In particular, without losing generality, we focused on mobile or wearable systems able to analyze human sweat. In performing this review, the focus was on the main challenges and trends underlined in the literature, in order to provide specific hints that can be used to set shared procedures and improve the overall reliability of the identified solutions, addressing the importance of sample management, the sensing components, and the electronics. This review can contribute to supporting an effective validation of mobile or wearable PoCT devices and thus to spreading the use of reliable approaches outside hospitals and clinical laboratories.

Label-Free Physical Techniques and Methodologies for Proteins Detection in Microfluidic Biosensor Structures

Proteins in biological fluids (blood, urine, cerebrospinal fluid) are important biomarkers of various pathological conditions. Protein biomarkers detection and quantification have been proven to be an indispensable diagnostic tool in clinical practice. There is a growing tendency towards using portable diagnostic biosensor devices for point-of-care (POC) analysis based on microfluidic technology as an alternative to conventional laboratory protein assays. In contrast to universally accepted analytical methods involving protein labeling, label-free approaches often allow the development of biosensors with minimal requirements for sample preparation by omitting expensive labelling reagents. The aim of the present work is to review the variety of physical label-free techniques of protein detection and characterization which are suitable for application in micro-fluidic structures and analyze the technological and material aspects of label-free biosensors that implement these methods. The most widely used optical and impedance spectroscopy techniques: absorption, fluorescence, surface plasmon resonance, Raman scattering, and interferometry, as well as new trends in photonics are reviewed. The challenges of materials selection, surfaces tailoring in microfluidic structures, and enhancement of the sensitivity and miniaturization of biosensor systems are discussed. The review provides an overview for current advances and future trends in microfluidics integrated technologies for label-free protein biomarkers detection and discusses existing challenges and a way towards novel solutions.

Enhancement of Sensitivity with High-Reflective-Index Guided-Wave Nanomaterials for a Long-Range Surface Plasmon Resonance Sensor

A guided−wave long−range surface plasmon resonance (GW−LRSPR) sensor was proposed in this investigation. In the proposed sensor, high−refractive−index (RI) dielectric films (i.e., CH₃NH₃PbBr₃ perovskite, silicon) served as the guided−wave (GW) layer, which was combined with the long−range surface plasmon resonance (LRSPR) structure to form the GW−LRSPR sensing structure. The theoretical results based on the transfer matrix method (TMM) demonstrated that the LRSPR signal was enhanced by the additional high#x2212;RI GW layer, which was called the GW−LRSPR signal. The achieved GW−LRSPR signal had a strong ability to perceive the analyte. By optimizing the low− and high−RI dielectrics in the GW−LRSPR sensing structure, we obtained the highest sensitivity (S) of 1340.4 RIU⁻¹ based on a CH₃NH₃PbBr₃ GW layer, and the corresponding figure of merit (FOM) was 8.16 × 10⁴ RIU⁻¹ deg⁻¹. Compared with the conventional LRSPR sensor (S = 688.9 RIU⁻¹), the sensitivity of this new type of sensor was improved by nearly 94%.

Surface plasmon resonance aptasensor based on niobium carbide MXene quantum dots for nucleocapsid of SARS-CoV-2 detection

A novel label-free surface plasmon resonance (SPR) aptasensor has been constructed for the detection of N-gene of SARS-CoV-2 by using thiol-modified niobium carbide MXene quantum dots (Nb₂C-SH QDs) as the bioplatform for anchoring N-gene-targeted aptamer. In the presence of SARS-CoV-2 N-gene, the immobilized aptamer strands changed their conformation to specifically bind with N-gene. It thus increased the contact area or enlarged the distance between aptamer and the SPR chip, resulting in a change of the SPR signal irradiated by the laser (He-Ne) with the wavelength (λ) of 633 nm. Nb₂C QDs were derived from Nb₂C MXene nanosheets via a solvothermal method, followed by functionalization with octadecanethiol through a self-assembling method. Subsequently, the gold chip for SPR measurements was modified with Nb₂C-SH QDs via covalent binding of the Au-S bond also by self-assembling interaction. Nb₂C-SH QDs not only resulted in high bioaffinity toward aptamer but also enhanced the SPR response. Thus, the Nb₂C-SH QD-based SPR aptasensor had low limit of detection (LOD) of 4.9 pg mL⁻¹ toward N-gene within the concentration range 0.05 to 100 ng mL⁻¹. The sensor also showed excellent selectivity in the presence of various respiratory viruses and proteins in human serum and high stability. Moreover, the Nb₂C-SH QD-based SPR aptasensor displayed a vast practical application for the qualitative analysis of N-gene from different samples, including seawater, seafood, and human serum. Thus, this work can provide a deep insight into the construction of the aptasensor for detecting SARS-CoV-2 in complex environments.

Design and Optimization of Surface Plasmon Resonance Spectroscopy for Optical Constant Characterization and Potential Sensing Application: Theoretical and Experimental Approaches

The best surface plasmon resonance (SPR) signal can be generated based on several factors that include the excitation wavelength, the type of metal used, and the thickness of the metal layer. In this study, the aforementioned factors have been investigated to obtain the best SPR signal. The excitation wavelength of 633 nm and gold metal with thickness of 50 nm were required to generate the SPR signal before the SPR was used for optical constant characterization by fitting of experimental results to the theoretical data. The employed strategy has good agreement with the theoretical value where the real part refractive index, n value, of the gold thin film was 0.1245 while the value for the imaginary part, k, was 3.6812 with 47.7 nm thickness. Besides that, the optical characterization of nanocrystalline cellulose (NCC)-based thin film has also been demonstrated. The n and k values found for this thin film were 1.4240 and 0.2520, respectively, with optimal thickness of 9.5 nm. Interestingly when the NCC-based thin film was exposed to copper ion solution with n value of 1.3333 and k value of 0.0060 to 0.0070 with various concentrations (0.01–10 ppm), a clear change of the refractive index value was observed. This result suggests that the NCC-based thin film has high potential for copper ion sensing using SPR with a sensitivity of 8.0052°/RIU.

Exploring The Interactions of a Natural Gamma-Oryzanol with Human Serum Albumin: Surface Plasmon Resonance, Fluorescence, and Molecular Modeling Studies

γ-oryzanol (ORY) is the vital bioactive compound, which is a mixture of ferulic acid ester and plant sterols. In the present work, the binding of ORY to human serum albumin (HSA) was investigated at the molecular level using fluorescence spectroscopy and surface plasmon resonance (SPR) as well as molecular modeling studies. Based on the fluorescence data analysis, ORY can form a non-fluorescent complex with HSA and induce static quenching of the emission intensity of HSA. Also, the high value of K _SV (34.69 × 10⁴ M^-1) confirmed a high sensitivity of HSA toward ORY. The real-time monitoring of the binding of ORY to HSA was carried out using the SPR technique. The small K _D value (1.23 × 10^-6 M) calculated by SPR analysis indicated a high affinity of ORY toward HSA. The molecular modeling studies confirmed that ORY has only one binding site on HSA and binds HSA in a cavity between subdomain IIA and IIIA.

Recent Advancements in Aptamer-Based Surface Plasmon Resonance Biosensing Strategies

Surface plasmon resonance (SPR) can track molecular interactions in real time, and is a powerful as well as widely used biological and chemical sensing technique. Among the different SPR-based sensing applications, aptamer-based SPR biosensors have attracted significant attention because of their simplicity, feasibility, and low cost for target detection. Continuous developments in SPR aptasensing research have led to the emergence of abundant technical and design concepts. To understand the recent advances in SPR for biosensing, this paper reviews SPR-based research from the last seven years based on different sensing-type strategies and sub-directions. The characteristics of various SPR-based applications are introduced. We hope that this review will guide the development of SPR aptamer sensors for healthcare.

Black Phosphorus Nanostructure Based Highly Sensitive and Selective Surface Plasmon Resonance Sensor for Biological and Chemical Sensing: A Review

Surface plasmon resonance (SPR) is an attention-grabbing sensor type, which offers the sensitive and selective detection of biomolecules and environmentally toxic substances. Notably, the SPR sensor gives excellent rewards including real-time, in-situ, and label-free measuring capability as compared to existing sensing technologies. As a result, these noteworthy merits of the SPR sensor make it straightforward to investigate the molecular events and chemical/gas molecule interaction. Unfortunately, there are different binding events including smaller molecular mass substances, which cannot be detected at the SPR sensor. Accordingly, this downside of the SPR sensor eventually led to the design and implementation of new approaches for sensitivity and selectivity improvement for sensing applications in different fields. Recently, the black phosphorus (BP) derived 2 D nanomaterial is stand out as a distinctive nanostructure in comparison to recently reported other 2 D nanomaterials. Substantial and functional characteristics of BP including simplicity of operation, optical properties, high carrier mobility, stronger immobilization of receptors and biomolecules, electronic bridging playing important role in the highly selective and sensitive assessment of analyte. The designed BP nanostructures are mostly serving to accelerate the plasmon material signals followed by improved molecular sensing that may due to 40-times faster-sensing responses of BP nanostructure than reported 2 D nanomaterials. Therefore, the present review article sheds light on the latest significant advances in biological and toxic gas detection through 2D BP nanostructures based SPR sensors. In the future, this review will facilitate detailed insights into the development of BP-based groundbreaking frameworks for highly sensitive and selective recognition of biomolecules and environmental pollutants.

Plasmonic Nanoparticles as Optical Sensing Probes for the Detection of Alzheimer's Disease

Alzheimer's disease (AD), considered a common type of dementia, is mainly characterized by a progressive loss of memory and cognitive functions. Although its cause is multifactorial, it has been associated with the accumulation of toxic aggregates of the amyloid-β peptide (Aβ) and neurofibrillary tangles (NFTs) of tau protein. At present, the development of highly sensitive, high cost-effective, and non-invasive diagnostic tools for AD remains a challenge. In the last decades, nanomaterials have emerged as an interesting and useful tool in nanomedicine for diagnostics and therapy. In particular, plasmonic nanoparticles are well-known to display unique optical properties derived from their localized surface plasmon resonance (LSPR), allowing their use as transducers in various sensing configurations and enhancing detection sensitivity. Herein, this review focuses on current advances in in vitro sensing techniques such as Surface-enhanced Raman scattering (SERS), Surface-enhanced fluorescence (SEF), colorimetric, and LSPR using plasmonic nanoparticles for improving the sensitivity in the detection of main biomarkers related to AD in body fluids. Additionally, we refer to the use of plasmonic nanoparticles for in vivo imaging studies in AD.

Photooxidation-induced fluorescence amplification system for an ultra-sensitive enzyme-linked immunosorbent assay (ELISA)

This report suggests a method of enhancing the sensitivity of chemifluorescence-based ELISA, using photooxidation-induced fluorescence amplification (PIFA). The PIFA utilized autocatalytic photooxidation of the chemifluorescent substrate, 10-acetyl 3,7-dihydroxyphenoxazine (ADHP, Amplex Red) to amplify the fluorescent product resorufin, initially oxidized by horse radish peroxidase (HRP). As the amplification rate is proportional to the initial level of resorufin, the level of antigen labeled by HRP is quantified by analyzing the profile of fluorescence intensity. The normalized profile was interpolated into an autocatalysis model, and the rate of increase at half-maximum time was quantified by the use of an amplification index (AI). The lower limit of detection, for resorufin or HRP, was less than one-tenth that of the plate reader. It requires only slight modification of the fluorescence reader and is fully compatible with conventional or commercial ELISA. When it is applied to a commercial ELISA kit for the detection of amyloid beta, it is verified that the PIFA assay enhanced the detection sensitivity by more than a factor of 10 and was compatible with a conventional 96-well ELISA assay kit. We anticipate this PIFA assay to be used in research for the detection of low levels of proteins and for the early diagnosis of various diseases with rare protein biomarkers, at ultra-low (pg/mL) concentrations.

Printed Electrochemical Biosensors: Opportunities and Metrological Challenges

Printed electrochemical biosensors have recently gained increasing relevance in fields ranging from basic research to home-based point-of-care. Thus, they represent a unique opportunity to enable low-cost, fast, non-invasive and/or continuous monitoring of cells and biomolecules, exploiting their electrical properties. Printing technologies represent powerful tools to combine simpler and more customizable fabrication of biosensors with high resolution, miniaturization and integration with more complex microfluidic and electronics systems. The metrological aspects of those biosensors, such as sensitivity, repeatability and stability, represent very challenging aspects that are required for the assessment of the sensor itself. This review provides an overview of the opportunities of printed electrochemical biosensors in terms of transducing principles, metrological characteristics and the enlargement of the application field. A critical discussion on metrological challenges is then provided, deepening our understanding of the most promising trends in order to overcome them: printed nanostructures to improve the limit of detection, sensitivity and repeatability; printing strategies to improve organic biosensor integration in biological environments; emerging printing methods for non-conventional substrates; microfluidic dispensing to improve repeatability. Finally, an up-to-date analysis of the most recent examples of printed electrochemical biosensors for the main classes of target analytes (live cells, nucleic acids, proteins, metabolites and electrolytes) is reported.