Novel SeS2-loaded Co MOF with Au@PANI comprised electroanalytical molecularly imprinted polymer-based disposable sensor for patulin mycotoxin

Metal-organic frameworks-molecularly imprinted polymers (MOF-MIP): Synthesis, properties, and applications in detection and control of microorganisms

Microbial contamination poses a significant threat to human health, food safety, and the ecological environment. Its rapid spread and potential pathogenicity create an urgent global challenge for efficient detection and control. However, existing methods have several shortcomings such as traditional techniques like culture methods and polymerase chain reaction (PCR) are time-consuming, while nanomaterials and aptamers often lack selectivity, stability, and affordability. Additionally, conventional disinfectants can be inefficient, lead to drug resistance, and harm the environment. To address these challenges, developing new materials and technologies that are efficient, sensitive, and stable is crucial for microbial detection and control. In this context, metal-organic frameworks (MOF) and molecularly imprinted polymers (MIP) have emerged as promising functional materials due to their unique structural advantages. The high porosity of MOF provides ample imprinting sites for MIP, while MIP enhance selective adsorption and inactivation of target microorganisms by MOF. This synergistic combination results in a composite material that offers a novel solution for microbial detection, significantly improving sensitivity, selectivity, antibacterial efficiency, and environmental friendliness. This paper reviews the synthesis strategies of metal-organic frameworks-molecularly imprinted polymers (MOF-MIP), highlighting their structural properties and innovative applications in microbial detection, which aim to inspire researchers in related fields. Looking ahead, future advancements in material science and biotechnology are expected to lead to widespread use of MOF-MIP composites in food safety, environmental monitoring, medical diagnosis, and public health-providing robust support against microbial pollution. By studying the collaborative mechanisms of MOF and MIP while optimizing design processes will enhance precision speed cost-effectiveness in microbial detection technology significantly contributing to human health and environmental safety.

Synergistic effect of acoustic streaming and nanozymes on enhanced intracellular dopamine detection

Microfluidic electrochemical biosensing has been widely recognized, but it suffers the slow mass transfer caused by low Reynolds number in the microenvironment. This work proposes a multifunctional portable microfluidic electrochemical platform integrated with a gigahertz acoustic resonator, achieving improved electrochemical response, in situ nanozymes modification, cellular pre-treatment and portable detection on one chip. It was observed that the acoustic streaming (AS) generated by the resonator could reduce the thickness of the double electric diffusion layer and improve the mass transfer in bulk solution, leading to an enhancement in microfluidic electrochemical current response. In addition, in situ electrodeposition of polypyrrole (Ppy) and Ni3(HHTP)2 nano-composite nanozymes (Ppy-Ni3(HHTP)2) was achieved to increase the electrocatalytic activity of dopamine (DA). The results further revealed that AS and Ppy-Ni3(HHTP)2 collectively enhance the electrochemical detection of DA. Moreover, cell pre-treatment and intracellular DA detection was achieved to distinguish the passage of dopaminergic cells by the microfluidic electrochemical platform. Finally, portable detection of intracellular dopamine was realized by integrating the platform with the portable electrochemical sensing system. This study presented a novel approach to collectively enhance electrochemical biosensing using AS and nanozymes.

Cu Nanowires Encapsulated by ZIF67 for Efficient Ammonia Electrosynthesis from Nitrate

Electrochemical NO3 - reduction reaction (NO3RR) represents a green and sustainable way to produce valuable NH3 for both NH3 production and nitrate contaminant removal, and developing efficient, durable, highly selective catalyst is the key. Herein, we report a facile method to fabricate a catalyst composed of ultrafine Cu nanowires (Cu NWs) encapsulated by ZIF67, namely, CuNW@ZIF67, for efficient NH3 electrosynthesis from nitrate. The CuNW@ZIF67 catalyst exhibited excellent catalytic performance toward NO3RR in alkaline electrolyte, manifested by a large NH3 Faradaic efficiency of 93.7 % at -0.5 V versus reversible hydrogen electrode (RHE), a high energy efficiency over 30 % at -0.7 V, and robust long-term stability. Such intriguing catalytic properties are mainly ascribed to its structural merits and the strong electronic interaction between Cu NWs and ZIF67. DFT calculations revealed that, the Cu site can easily convert NO3 - into NO2 -, while the Co site plays a critical role in catalyzing the NO2 --to-NH3 process. The study can shed light on rational design of efficient, durable, and highly selective catalysts for NO3RR and beyond.

Recent Progress of Molecularly Imprinted Technique for the Detection of Mycotoxins in Food

Mycotoxins are a group of toxic metabolites produced by fungi that infect agricultural products. Consuming mycotoxin-contaminated foods and feeds can cause various adverse health effects in humans and animals. Therefore, developing rapid and sensitive analytical methods for detecting mycotoxins is an urgent task. The molecularly imprinted technique is an advanced analytical tool for the specific recognition and selective enrichment of target molecules. For the development of rapid detection methods for mycotoxins, synthesized molecularly imprinted polymers (MIPs) can serve as specific recognition elements. By integrating MIPs with various sensing platforms, such as solid-phase extraction, electrochemical sensors, fluorescence sensors, surface-enhanced Raman spectroscopy, and surface plasmonic resonance sensors, remarkable progress has been made in the detection of mycotoxins in foods. This review focuses on the advances in the application of MIPs for the rapid detection of various mycotoxins over the past five years. The development of new MIP synthesis methods is categorized and summarized. Moreover, the future potential of MIP-based methods for mycotoxin detection is also discussed and highlighted.

Recent Progress and Applications of Advanced Nanomaterials in Solid-Phase Extraction

Sample preparation maintains a key bottleneck in the whole analytical procedure. Solid-phase sorbents (SPSs) have garnered increasing attention in sample preparation research due to their crucial roles in achieving high clean-up and enrichment efficiency in the analysis of trace targets present in complex matrices. Novel nanoscale materials with improved characteristics have garnered considerable interest across different scientific disciplines due to the limited capabilities of traditional bulk-scale materials. The purpose of this review is to offer a thorough summary of the latest developments and uses of SPSs in preparing samples for chromatographic analysis, focusing on the years 2020-2024. The techniques for preparing SPSs are examined, such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), carbon nanoparticles (CNPs), molecularly imprinted polymers (MIPs), and metallic nanomaterials (MNs). Examining the pros and cons of different extraction methods, including solid-phase extraction (SPE), magnetic SPE (MSPE), flow-based SPE (FBA-SPE), solid-phase microextraction (SPME), stir-bar sorptive extraction (SBSE), and dispersive SPE (DSPE), is the main focus. Furthermore, this article presents the utilization of SPE technology for isolating common contaminants in various environmental, biological, and food specimens. We highlight the persistent challenges in SPSs and anticipate future advancements and applications of novel SPSs.

Detection of tetracycline by molecularly imprinted electrochemical sensor based on the modification of poly(3,4-propylene dioxythiophene)/chitosan/au

In this study, a molecularly imprinted polymer (MIP) electrochemical sensor based on poly(3,4-propylenedioxythiophene)/chitosan/Au (PProDOT/CS/Au) composite modification was designed for highly sensitive and selective detection of TC. Green synthesis of CS/Au without the use of reducing agents, followed by in-situ oxidation polymerization of PProDOT. The high electrochemical activity and high stability of PProDOT, the numerous functional groups (-OH, -NH2) of CS, and the excellent electron transport capacity of AuNPs, which provided a suitable incubation chamber for the production of imprinted cavities. Meanwhile, combined with the specific recognition ability of MIP, it showed superior performance over bare glassy carbon electrodes. Under the optimal experimental conditions, this sensor showed good linearity for TC in the concentration ranges of 0.0001-100 μM, with a low limit of detection (LOD) of 0.19 nM. At the same time, the sensor exhibited satisfactory selectivity, repeatability, reproducibility and stability. It was evident from the results of the study that the sensor designed in this paper showed considerable potential for application in the detection of TC in pharmaceuticals, the environment, and food samples.

Molecular imprinting electrochemical sensor based on hollow spherical PProDOT-2CH2OH and chitosan-derived carbon materials for highly sensitive detection of chloramphenicol

The misuse of chloramphenicol (CAP) has jeopardized environmental safety. It is critical to create an effective and sensitive CAP detection technique. In this paper, a composite of chitosan (CS)-derived carbon material modified hollow spherical hydroxylated poly(3,4-propylenedioxythiophene) (PProDOT-2CH2OH) was designed, which innovatively used o-phenylenediamine and p-aminobenzoic acid as bi-functional monomers to prepare molecular imprinting polymer (MIP) sensors for highly sensitive analysis and determination of CAP. It was found that the hollow spherical structure of PProDOT-2CH2OH significantly enhanced the rapid electron migration. When combined with the CS-derived carbon material, which has multi-functional sites, it improved the electrical activity and stability of the sensor. It also provided more active centers for the MIP layer to specifically recognize CAP. Therefore, this MIP sensor had a wide linear response (0.0001 ∼ 125 μM), a low limit of detection (LOD, 6.6 pM), excellent selectivity and stability. In addition, studies showed that the sensor has potential practical value. ENVIRONMENTAL IMPLICATION: Chloramphenicol (CAP) is one of the most widely used antibiotics with the highest dosage due to its low price and broad-spectrum antimicrobial properties. Due to its incomplete metabolism in living organisms and its difficulty in degrading in the environment, contamination caused by it can pose a threat to public health. In this study, a novel molecularly imprinted sensor (MIP/PC2C1/GCE) was designed to provide a new idea for rapid and precise removal of CAP by adsorption. The detection of CAP in pharmaceutical, water quality, and food fields was realized.

Extrinsically conducting MOFs: guest-promoted enhancement of electrical conductivity, thin film fabrication and applications

Conductive metal-organic frameworks are of current interest in chemical science because of their applications in chemiresistive sensing, electrochemical energy storage, electrocatalysis, etc. Different strategies have been employed to design conductive frameworks. In this review, we discuss the influence of different types of guest species incorporated within the pores or channels of metal-organic frameworks (MOFs) and porous coordination polymers (PCPs) to generate charge transfer pathways and modulate their electrical conductivity. We have classified dopants or guest species into three different categories: (i) metal-based dopants, (ii) molecule and molecular entities and (iii) organic conducting polymers. Different types of metal ions, metal nano-clusters and metal oxides have been used to enhance electrical conductivity in MOFs. Metal ions and metal nano-clusters depend on the hopping process for efficient charge transfer whereas metal-oxides show charge transport through the metal-oxygen pathway. Several types of molecules or molecular entities ranging from neutral TCNQ, I2, and fullerene to ionic methyl viologen, organometallic like nickelcarborane, etc. have been used. In these cases, the charge transfer process varies with the guest species. When organic conducting polymers are the guest, the charge transport occurs through the polymer chains, mostly based on extended π-conjugation. Here we provide a comprehensive and critical review of these strategies to add electrical conductivity to the, in most cases, otherwise insulating MOFs and PCPs. We point out the guest encapsulation process, the geometry and structure of the resulting host-guest complex, the host-guest interactions and the charge transport mechanism for each case. We also present the methods for thin film fabrication of conducting MOFs (both, liquid-phase and gas-phase based methods) and their most relevant applications like electrocatalysis, sensing, charge storage, photoconductivity, photocatalysis,… We end this review with the main obstacles and challenges to be faced and the appealing perspectives of these 21st century materials.

A review of biocompatible polymer-functionalized two-dimensional materials: Emerging contenders for biosensors and bioelectronics applications

Bioelectronics, a field pivotal in monitoring and stimulating biological processes, demands innovative nanomaterials as detection platforms. Two-dimensional (2D) materials, with their thin structures and exceptional physicochemical properties, have emerged as critical substances in this research. However, these materials face challenges in biomedical applications due to issues related to their biological compatibility, adaptability, functionality, and nano-bio surface characteristics. This review examines surface modifications using covalent and non-covalent-based polymer-functionalization strategies to overcome these limitations by enhancing the biological compatibility, adaptability, and functionality of 2D nanomaterials. These surface modifications aim to create stable and long-lasting therapeutic effects, significantly paving the way for the practical application of polymer-functionalized 2D materials in biosensors and bioelectronics. The review paper critically summarizes the surface functionalization of 2D nanomaterials with biocompatible polymers, including g-C3N4, graphene family, MXene, BP, MOF, and TMDCs, highlighting their current state, physicochemical structures, synthesis methods, material characteristics, and applications in biosensors and bioelectronics. The paper concludes with a discussion of prospects, challenges, and numerous opportunities in the evolving field of bioelectronics.

Recent and emerging trends of metal-organic frameworks (MOFs)-based sensors for detecting food contaminants: A critical and comprehensive review

Interest in the use of sensors based on metal-organic frameworks (MOFs) to detect food pollutants has been growing recently due to the desirable characteristics of MOFs, including uniform structures, large surface area, ultrahigh porosity and easy-to-functionalize surface. Fundamentally, this review offers an excellent solution using MOFs-based sensors (e.g., fluorescent, electrochemical, electrochemiluminescence, surface-enhanced Raman spectroscopy, and colorimetric sensors) to detect food contaminants such as pesticide residues, mycotoxins, antibiotics, food additives, and other hazardous candidates. More importantly, their application scenarios and advantages in food detection are also introduced in more detail. Therefore, this systematic review analyzes detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles utilized in preparing MOFs-based sensors. Additionally, the main limitations of each sensing type, along with the enhancement mechanisms of MOFs in addressing efficient sensing are discussed. Finally, the limitations and potential trends of MOFs-based materials in food contaminant detection are also highlighted.

Ratiometric electrochemical immunoassay based on 2D Co/Fe MOF decorated with toluidine blue and Fc-labeled Schiff base for accurate assay of alpha-fetoprotein in clinical serum

The high level of alpha-fetoprotein (AFP) expression is closely related to hepatocellular carcinoma (HCC). Herein, a dual signal ratiometric electrochemical immunosensor based on chitosan-ferrocenecarboxaldehyde-spindle gold (Chit-Fc-SAu) and Co/Fe metal-organic framework-toluidine blue/polydopamine (Co/Fe MOF-TB/PDA) was proposed for quantitative analysis of AFP. Specifically, Chit-Fc-SAu worked as a substrate to trap more primary antibodies (Ab1) generating the first electrochemical signal from Fc. Thanks to the large specific surface area, the synergistic and electronic effects of Co/Fe MOF nanosheets, and the rich functional groups of PDA, Co/Fe MOF-TB/PDA could load more secondary antibodies (Ab2) and signal molecules (TB) providing another amplified electrochemical signal. In the presence of AFP, Ab1-AFP-Ab2 formed a sandwich structure, and as the AFP concentration increased, the peak current ratio of TB to Fc (ITB/IFc) also increased. The dual signal ratiometric strategy can avoid environmental signal interference and achieve signal self-calibration, thereby improving the accuracy and reproducibility of detection. After a series of exploration, this self-calibrated ratiometric immunosensor exhibited a wide linear range (0.001-200 ng mL-1), a low detection limit (0.34 pg mL-1), and good repeatability. When applied to the assay of clinical serum samples, the detection results of ratiometric sensor were consistent with that of commercial electrochemiluminescence (ECL) immunoassay, significantly superior to that of non-ratiometric sensor. The self-calibrated strategy based on ratiometric sensor helps to improve the accuracy of AFP in clinical diagnosis.

Covalent organic frame based high-performance nanocomposite for construction of ATP sensor

In this work, a novel covalent organic frame (TAPT-TFPB COF) with self-enhanced photoelectric activity was prepared for decorating on conductive single-walled carbon nanotubes (SWCNT) to synthetize a high-performance photoelectric nanocomposite (COF/SWCNT), in which the interfacial charge separation and photogenerated carrier migration rate was significantly improved to obtain desiring photoelectric conversion efficiency for generating an extremely high photocurrent. Accordingly, the synthetic COF/SWCNT was ingeniously applied in the fabrication of ultrasensitive photoelectrochemical (PEC) biosensor for realizing the trace ATP detection by integrating with an Exo III-assisted dual DNA recycling amplification strategy. The recycling amplification could efficiently convert trace target ATP into plentiful output DNA, which ingeniously triggered the hybridization chain reaction (HCR) to generate a long DNA strand with substantial quencher manganese porphyrin (MnPP) loading to depress the photocurrent of COF/SWCNT. The experimental data showed that proposed biosensor had a detection range from 10 fmol L-1 to 10 nmol L-1 with the detection limit as low as 2.75 fmol L-1 (S/N = 3). In addition, this proposed biosensor showed excellent analytical performance in terms of stability, specificity and reproducibility, providing a possibility to accomplish sensitive and accurate in vitro diagnosis.

A sensitive bimetallic copper/bismuth metal-organic frameworks-based aptasensors for zearalenone detection in foodstuffs

Electrochemical aptasensors have emerged as promising platforms for effectivelydetection of various target analytes. Here, we developed a sensitive and selective electrochemical aptasensor for zearalenone (ZEN) determination based on a bimetallic organic framework (CuBi-BPDC). The results of HR-TEM, FE-SEM, XPS, etc. indicate the CuBi-BPDC possessing mixed nodes of Cu(II) and Bi(III) and multilayered nanosheets bearing nanoparticles. Due to its improved electrochemical activity and strong affinity for aptamers, the CuBi-BPDC-based aptasensor obtains a low limit of detection of 0.19 fg mL-1 (IUPAC S/N = 3) in a wide range of 1 fg mL-1-10 ng mL-1 via EIS and 0.73 fg mL-1 from 0 fg mL-1 to 1 × 107 fg mL-1 via DPV for ZEN detection, respectively. Moreover, the excellent selectivity allows this aptasensor to specifically identify ZEN from other interfering substances in raw milk and rice, indicating the potential applicability of the CuBi-BPDC-based aptasensor in sensitive and selective detection of ZEN.

A Redox Mediator-Free Highly Selective and Sensitive Electrochemical Aptasensor for Patulin Mycotoxin Detection in Apple Juice Using Ni-NiO Pseudocapacitive Nanomaterials

Pseudocapacitive nanomaterials have recently gained significant attention in electrochemical biosensors due to their rapid response, long cycle life, high surface area, biomolecule compatibility, and superior energy storage capabilities. In our study, we introduce the potential of using Ni-NiO nanofilm's pseudocapacitive traits as transducer signals in electrochemical aptasensors. Capitalizing on the innate affinity between histidine and nickel, we immobilized histidine-tagged streptavidin (HTS) onto Ni-NiO-modified electrodes. Additionally, we employed a biolayer interferometry-based SELEX to generate biotinylated patulin aptamers. These aptamers, when placed on Ni-NiO-HTS surfaces, make a suitable biosensing platform for rapid patulin mycotoxin detection in apple juice using electrochemical amperometry in microseconds. The novelty lies in optimizing pseudocapacitive nanomaterials structurally and electrochemically, offering the potential for redox mediator-free electrochemical aptasensors. Proof-of-concept is conducted by applying this surface for the ultrasensitive detection of a model analyte, patulin mycotoxin. The aptamer-functionalized bioelectrode showed an excellent linear response (10-106 fg/mL) and an impressive detection limit (1.65 fg/mL, +3σ of blank signal). Furthermore, reproducibility tests yielded a low relative standard deviation of 0.51%, indicating the good performance of the developed biosensor. Real sample analysis in freshly prepared apple juice revealed no significant difference (P < 0.05) in current intensity between spiked and real samples. The sensor interface maintained excellent stability for up to 2 weeks (signal retention 96.45%). The excellent selectivity, stability, and sensitivity of the electrochemical aptasensor exemplify the potential for using nickel-based pseudocapacitive nanomaterials for a wide variety of electrochemical sensing applications.

Au/PANI@PtCu-based electrochemical immunosensor for ultrasensitive determination of pro-gastrin-releasing peptide

An ultrasensitive sandwich-type electrochemical immunosensor for pro-gastrin-releasing peptide (ProGRP) detection was constructed based on PtCu nanodendrites functionalized Au/polyaniline nanospheres (Au/PANI@PtCu). The prepared Au/PANI@PtCu nanocomposites not only possessed excellent electro-catalytic activity of H2O2 reduction due to the synergistic effect between the Au/PANI and PtCu NDs but also provided large specific surface area for detection of antibodies (Ab2) immobilization. In addition, Au nanoparticles encapsulated multi-wall carbon nanotubes (AuNPs@MWCNTs) were also applied to modify the glassy carbon electrode interface for loading numerous capture antibodies (Ab1). In the presence of target ProGRP, a sandwich-type electrochemical immunosensor showed a strong current response from the electro-catalysis of Au/PANI@PtCu toward H2O2 reduction. Benefiting from the exceptional electro-catalytic performance of Au/PANI@PtCu and the high conductivity of AuNPs@MWCNTs, the sandwich-type immunoassay exhibited remarkable sensitivity in detection. The linear range extended from 100 fg/mL to 10 ng/mL, while achieving an impressively low limit of detection of 77.62 fg/mL.

Current Trends in Mycotoxin Detection with Various Types of Biosensors

One of the most important tasks in food safety is to properly manage the investigation of mycotoxin contamination in agricultural products and foods made from them, as well as to prevent its occurrence. Monitoring requires a wide range of analytical methods, from expensive analytical procedures with high-tech instrumentation to significantly cheaper biosensor developments or even single-use assays suitable for on-site monitoring. This review provides a summary of the development directions over approximately a decade and a half, grouped according to the biologically sensitive components used. We provide an overview of the use of antibodies, molecularly imprinted polymers, and aptamers, as well as the diversity of biosensors and their applications within the food industry. We also mention the possibility of determining multiple toxins side by side, which would significantly reduce the time required for the analyses.

Bisphenol A detection based on nano gold-doped molecular imprinting electrochemical sensor with enhanced sensitivity

A facile electrochemical sensor based on nano gold-doped molecularly imprinted polymer (MIP) was proposed to realize the selective detection of bisphenol A (BPA) with enhanced sensitivity. Initially, gold-doped MIP (Au@MIP) film was constructed by electropolymerizing p-aminobenzoic acid (PABA) and BPA with in situ gold reduction to distribute gold nanoparticles nearby the imprinted cavities. Subsequently, the template molecules were further extracted from the polymer film, then the MIP could rebind with the template molecules to achieve specific detection of BPA. The nano gold-doped MIP increased the effective surface area and promoted conductivity when BPA was oxidized in the imprinted cavities, which improved the determination sensitivity. Under optimal conditions, the prepared sensor displayed a linear range from 0.5 to 100 μM for BPA detection with a detection limit of 52 nM. The designed sensor was further used to detect BPA in food samples, obtaining satisfactory recoveries from 96.7% to 107.6%.

Patulin-imprinted origami 3D-ePAD based on graphene screen-printed electrode modified with Mn-ZnS quantum dot coated with a molecularly imprinted polymer

We developed a novel, compact, three-dimensional electrochemical paper-based analytical device (3D-ePAD) for patulin (PT) determination. The selective and sensitive PT-imprinted Origami 3D-ePAD was constructed based on a graphene screen-printed electrode modified with manganese-zinc sulfide quantum dots coated with patulin imprinted polymer (Mn-ZnS QDs@PT-MIP/GSPE). The Mn-ZnS QDs@PT-MIP was synthesized using 2-oxindole as the template, methacrylic acid (MAA) as a monomer, N,N'-(1,2-dihydroxyethylene) bis (acrylamide) (DHEBA) as cross-linker and 2,2'-azobis (2-methylpropionitrile) (AIBN) as initiator, respectively. The Origami 3D-ePAD was designed with hydrophobic barrier layers formed on filter paper to provide three-dimensional circular reservoirs and assembled electrodes. The synthesized Mn-ZnS QDs@PT-MIP was quickly loaded on the electrode surface by mixing with graphene ink and then screen-printing on the paper. The PT-imprinted sensor provides the greatest enhancement in redox response and electrocatalytic activity, which we attributed to synergetic effects. This arose from an excellent electrocatalytic activity and good electrical conductivity of Mn-ZnS QDs@PT-MIP, which improved electron transfer between PT and the electrode surface. Under the optimized DPV conditions, a well-defined PT oxidation peak appears at +0.15 V (vs Ag/AgCl) using 0.1 M of phosphate buffer (pH 6.5) containing 5 mM K₃Fe(CN)₆ as the supporting electrolyte. Our developed PT imprinted Origami 3D-ePAD revealed excellent linear dynamic ranges of 0.001-25 μM, with a detection limit of 0.2 nM. Detection performance indicated that our Origami 3D-ePAD possesses outstanding detection performance from fruits and CRM in terms of high accuracy (%Error for inter-day is 1.11%) and precision (%RSD less than 4.1%). Therefore, the proposed method is well-suited as an alternative platform for ready-to-use sensors in food safety. The imprinted Origami 3D-ePAD is an excellent disposable device with a simple, cost-effective, and fast analysis, and it is ready to use for determining patulin in actual samples.

An electrochemical chlorpromazine sensor based on a gold-copper bimetallic synergetic molecularly imprinted interface on an acupuncture needle electrode

Chlorpromazine (CPZ) is a medicine for nervous system disorders. Measuring CPZ in vivo can assist doctors in evaluating patients' blood drug concentration and monitoring drug metabolism. Therefore, an accurate in vivo detection of CPZ is crucial. In recent years, the acupuncture needle, traditionally used in Chinese medicine, has emerged as a potential electrode in the field of electrochemistry, with promising applications for in vivo detection. In this study, Au/Cu nanoparticles were electrodeposited onto an acupuncture needle electrode (ANE) to improve electrical conductivity and provide an electro-catalytic surface. Subsequently, 3-aminophenylboronic acid and CPZ were attracted to each other through intermolecular forces; at the same time, the interaction force of Au-S between CPZ and the AuNPs made the polymer layer grow around the CPZ molecules on the modified electrode surface. The imprinted nanocavities showed highly selective and sensitive detection performance for CPZ after elution. Inside the recognizable site and microenvironment of the cavities, the captured CPZ molecule provided a suitable configuration for the fluent electron transfer of the electroactive group within a short range from the Au/Cu bimetal. Under ideal conditions, the MIP/Au/Cu/ANE exhibited two good linear ranges of 0.1-100 μM and 100-1000 μM with a detection limit of 0.07 μM. Moreover, the sensors showed great selectivity, good stability and excellent repeatability, making them suitable for CPZ detection in human serum. This provides a novel idea for real-time and in vivo CPZ detection.

Phosphate-driven H2O2 decomposition on DNA-bound bio-inspired activated carbon-based sensing platform for biological and food samples

Hydrogen peroxide (H₂O₂) is one of the most important reactive oxygen species (ROS). Increased endogenous H₂O₂ levels indicate oxidative stress and could be a potential marker of many diseases, including Alzheimer's, cardiovascular diseases, and diabetes. However, consuming H₂O_2-incorporated food has adverse effects on humans and is a serious health concern. We used salmon testes DNA with bio-inspired activated carbon (AC) as an electrocatalyst for developing a novel H₂O₂ sensor. The phosphate backbone of DNA contains negatively charged oxygen groups that specifically attract protons from H₂O₂ reduction. We observed a linearity range of 0.01-250.0 μM in the H₂O₂ reduction peak current with a detection limit of 2.5 and 45.7 nM for chronoamperometric and differential pulse voltammetric studies. High biocompatibility of the sensor was achieved by the DNA, facilitating endogenous H₂O₂ detection. Moreover, this non-enzymatic sensor could also help in the rapid screening of H₂O₂-contaminated foods.

Covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as electrochemical sensors for the efficient detection of pharmaceutical residues

Pharmaceutical residues are the undecomposed remains from drugs used in the medical and food industries. Due to their potential adverse effects on human health and natural ecosystems, they are of increasing worldwide concern. The acute detection of pharmaceutical residues can give a rapid examination of their quantity and then prevent them from further contamination. Herein, this study summarizes and discusses the most recent porous covalent-organic frameworks (COFs) and metal-organic frameworks (MOFs) for the electrochemical detection of various pharmaceutical residues. The review first introduces a brief overview of drug toxicity and its effects on living organisms. Subsequently, different porous materials and drug detection techniques are discussed with materials' properties and applications. Then the development of COFs and MOFs has been addressed with their structural properties and sensing applications. Further, the stability, reusability, and sustainability of MOFs/COFs are reviewed and discussed. Besides, COFs and MOFs' detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles are analyzed and discussed. Lastly, this review summarized and discussed the MOF@COF composite as sensors, the fabrication strategies to enhance detection potential, and the current challenges in this area.

Sulfhydryl-functionalized carbon dots as effective probes for fluorescence enhancement detection of patulin

In this study, sulfydryl-functionalized nitrogen-doped carbon dots (SH-NCDs) was synthesized by amide reaction of hydrothermally synthesized carbon dots with l-cysteine and used to detect patulin selectively. The SH-NCDs exhibited excitation wavelength-independent fluorescence in the range 300-360 nm. The modified sulfhydryl group (-SH) on the surface of NCDs served as a specific recognition site to capture patulin. The addition reaction between patulin and the -SH on the SH-NCDs surface resulted in enhanced fluorescence. SH-NCDs was used as a fluorescent probe for label-free detection of patulin, showing excellent sensitivity in the linear range of 0.1-400 ng mL^-1, with detection limits as low as 0.053 ng mL^-1. The fluorescent probe has specific selectivity for patulin. The recoveries of patulin in apple juice and grape juice were 88.9 %-99.2 % and 92.5 %-101.8 %, respectively. These results showed that the sensor designed in this experiment selectively detected the target patulin from complex food systems.

MOF-Based Mycotoxin Nanosensors for Food Quality and Safety Assessment through Electrochemical and Optical Methods

Mycotoxins in food are hazardous for animal and human health, resulting in food waste and exacerbating the critical global food security situation. In addition, they affect commerce, particularly the incomes of rural farmers. The grave consequences of these contaminants require a comprehensive strategy for their elimination to preserve consumer safety and regulatory compliance. Therefore, developing a policy framework and control strategy for these contaminants is essential to improve food safety. In this context, sensing approaches based on metal-organic frameworks (MOF) offer a unique tool for the quick and effective detection of pathogenic microorganisms, heavy metals, prohibited food additives, persistent organic pollutants (POPs), toxins, veterinary medications, and pesticide residues. This review focuses on the rapid screening of MOF-based sensors to examine food safety by describing the main features and characteristics of MOF-based nanocomposites. In addition, the main prospects of MOF-based sensors are highlighted in this paper. MOF-based sensing approaches can be advantageous for assessing food safety owing to their mobility, affordability, dependability, sensitivity, and stability. We believe this report will assist readers in comprehending the impacts of food jeopardy exposure, the implications on health, and the usage of metal-organic frameworks for detecting and sensing nourishment risks.

A robust electrochemical sensing platform for the detection of erlotinib based on nitrogen-doped graphene quantum dots/copper nanoparticles-polyaniline-graphene oxide nanohybrid

Erlotinib is a potent and highly specific tyrosine kinase inhibitor with the hindering effects on the growth of cancer cells. An electrochemical sensor with the great sensitivity and selectivity was fabricated for determining erlotinib by using a graphite rod electrode modified by the nitrogen-doped graphene quantum dots (N-GQDs) and a ternary nanohybrid comprising copper nanoparticles, polyaniline, along with graphene oxide (N-GQDs/CuNPs-PANI@GO) for the first time. The establishment of PANI and CuNPs was done simultaneously on the GO surface by thein situoxidative polymerization method. The morphological characteristics and elemental structure of the synthesized nanoparticles were examined by some microscopy techniques and x-ray energy/diffraction methods. The fabricated sensor represented the electrocatalytic activity towards erlotinib with a linear detection range from 1.0 nM to 35.0μM, a detection limit of 0.712 nM, and a sensitivity of 1.3604μAμM^-1. Moreover, the N-GQDs/CuNPs-PANI@GO sensor showed acceptable stability up to 30 d (94.82%), reproducibility (RSD values of 3.19% intraday and 3.52% interday), and repeatability (RSD value of 3.65%) as a novel and powerful electrochemical sensor. It was successfully applied to monitor erlotinib in the drug-injected aqueous solution, serum, and urine samples that proved the capability of the sensor for the erlotinib monitoring in the biological samples.

Fluorescence sensor based on molecularly imprinted polymers and core-shell upconversion nanoparticles@metal-organic frameworks for detection of bovine serum albumin

A novel strategy for sensing protein was proposed through combining the high selectivity of molecular imprinting technology with the excellent upconversion fluorescence of upconversion nanoparticles (UCNPs) and high specific surface area of metal-organic frameworks (MOFs). Herein, the UCNPs acted as signal reporter and MOFs were introduced to increase the rate of mass transfer. The UCNPs@MIL-100 as support material was prepared via a step-by-step method. The imprinted material-coated UCNPs@MIL-100 (UCNPs@MIL-100@MIPs) were obtained by sol-gel technique. The results showed that as the increase of the template protein concentration, the fluorescence intensity of UCNPs@MIL-100@MIPs quenched gradually, and the imprinting factor was 2.90. The linear in the range of 1.00 to 8.00 μM, and the detection limit was 0.59 μM. Therefore, the novel optosensing material is very promising for future applications.

Recent Progress in Aptamer-Functionalized Metal-Organic Frameworks-Based Optical and Electrochemical Sensors for Detection of Mycotoxins

Mycotoxin contamination in foodstuffs and agricultural products has posed a serious hazard to human health and raised international concern. The progress of cost-effective, facile, rapid and reliable analytical tools for mycotoxin determination is in urgent need. In this regard, the potential utility of metal-organic frameworks (MOFs) as a class of crystalline porous materials has sparked immense attention due to their large specific surface area, adjustable pore size, nanoscale framework structure and good chemical stability. The amalgamation of MOFs with high-affinity aptamers has resulted in the progress of advanced aptasensing methods for clinical and food/water safety diagnosis. Aptamers have many advantages over classical approaches as exceptional molecular recognition constituents for versatile bioassays tools. The excellent sensitivity and selectivity of the MOF-aptamer biocomposite nominate them as efficient lab-on-chip tools for portable, label-free, cost-effective and real-time screening of mycotoxins. Current breakthroughs in the concept, progress and biosensing applications of aptamer functionalized MOFs-derived electrochemical and optical sensors for mycotoxins have been discussed in this study. We first highlighted an overview part, which provides some insights into the functionalization mechanisms of MOFs with aptamers, offering a foundation to create MOFs-based aptasensors. Then, we discuss various strategies to design high-performance MOFs-based aptamer scaffolds, which serve as either signal nanoprobe carriers or signal nanoprobes and their applications. We perceived that applications of optical aptamers are in their infancy in comparison with electrochemical MOFs-derived aptasensors. Finally, current challenges and prospective trends of MOFs-aptamer sensors are discussed.

Progress and challenges in sensing of mycotoxins using molecularly imprinted polymers

Mycotoxin is toxic secondary metabolite formed by certain filamentous fungi. This toxic compound can enter the food chain through contamination of food (e.g., by colonization of toxigenic fungi on food). In light of the growing concerns on the health hazards posed by mycotoxins, it is desirable to develop reliable analytical tools for their detection in food products in both sensitive and efficient manner. For this purpose, the potential utility of molecularly imprinted polymers (MIPs) has been explored due to their meritful properties (e.g., large number of tailor-made binding sites, sensitive template molecules, high recognition specificity, and structure predictability). This review addresses the recent advances in the application of MIPs toward the sensing of various mycotoxins (e.g., aflatoxins and patulin) along with their fabrication strategies. Then, performance evaluation is made for various types of MIP- and non-MIP-based sensing platforms built for the listed target mycotoxins in terms of quality assurance such as limit of detection (LOD). Further, the present challenges in the MIP-based sensing application of mycotoxins are discussed along with the future outlook in this research field.

Hematite/selenium disulfide hybrid catalyst for enhanced Fe(III)/Fe(II) redox cycling in advanced oxidation processes

Regeneration of Fe(II) is a key issue for heterogeneous advanced oxidation processes (AOPs) using iron-based catalysts. Herein, a hybrid catalyst was developed from α-Fe₂O₃ and SeS₂ to enhance the Fe(III)/Fe(II) redox cycling in both hydrogen peroxide (H₂O₂) system and persulfate (PS) system. The regeneration of Fe(II) was evidenced by the increased Fe(II)/Fe(III) ratio in the used catalyst (205.8% in the H₂O₂ system or 125.4% in the PS system), compared to 68.4% in the fresh hybrid catalyst Fe/Se-3. Methyl orange was used as a model pollutant to evaluate the degradation performance of the hybrid catalyst. Owing to the promotion of Fe(II) regeneration, Fe/Se-3 achieved a pollutant removal efficiency of 100.0% in 12 min in both systems, significantly higher than that with pure α-Fe₂O₃ (33.9 ± 3.6% in the H₂O₂ system or 30.7 ± 2.8% in the PS system). The dominant active species were identified as hydroxyl radicals in the H₂O₂ system and sulfate radicals in the PS system. In the proposed mechanism, soluble and surface-bound Fe species are provided by α-Fe₂O₃ to activate H₂O₂ or PS to radicals, and SeS₂ participates in the reactions via Se(IV) reducing Fe(III) to Fe(II) and S atoms being released through protonation to expose more active Se sites.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

An optosensor based on a hybrid sensing probe of mesoporous carbon and quantum dots embedded in imprinted polymer for ultrasensitive detection of thiamphenicol in milk

A hybrid fluorescent sensing probe was developed and used to quantitatively analyse thiamphenicol. The probe was constructed by entrapping mesoporous carbon and CdTe*CdS*ZnS quantum dots in molecularly imprinted polymer. The probe was characterized, and the construction and detection conditions were optimized. In the optimized conditions, the recognition sites of the nanoprobe were ultrasensitive and highly selective toward thiamphenicol. The quantitative analysis of thiamphenicol was based on the fluorescence quenching of the hybrid nanoprobe by thiamphenicol. Fluorescence emission was quenched linearly from 0.10 to 100 μg L^-1 with a coefficient of determination (R²) of 0.9979. The limit of detection was 0.04 μg L^-1. The accuracy of an optosensor based on the hybrid probe was evaluated by analyzing spiked milk samples. The results obtained were compared with the results of high-performance liquid chromatography (HPLC) analysis. The quantitative analysis of the spiked samples with the optosensor agreed well with HPLC analysis. Recoveries were in the range of 93.5 to 100.1 % with good precision (RSD < 5%). The accuracy, speed and convenience of the developed optosensor make it a powerful tool for the detection of thiamphenicol in milk.

Recent Advances in Metal-Organic Framework-Based Electrochemical Biosensing Applications

In the face of complex environments, considerable effort has been made to accomplish sensitive, accurate and highly-effective detection of target analytes. Given the versatility of metal clusters and ligands, high porosity and large specific surface area, metal–organic framework (MOF) provides researchers with prospective solutions for the construction of biosensing platforms. Combined with the benefits of electrochemistry method such as fast response, low cost and simple operation, the untapped applications of MOF for biosensors are worthy to be exploited. Therefore, this review briefly summarizes the preparation methods of electroactive MOF, including synthesize with electroactive ligands/metal ions, functionalization of MOF with biomolecules and modification for MOF composites. Moreover, recent biosensing applications are highlighted in terms of small biomolecules, biomacromolecules, and pathogenic cells. We conclude with a discussion of future challenges and prospects in the field. It aims to offer researchers inspiration to address the issues appropriately in further investigations.

Polyaniline Nanofibers-Embedded Gold Nanoparticles Obtained by Template-Free Procedure with Immobilization Prospects

In this work, template-free nanostructured conducting polymers (nCPs)-embedded gold nanoparticles (AuNPs) from aniline, thiophene and 3,4-ethylenedioxythiophene have been prepared via a one-pot sonochemical method. The synthesis of the nanocomposite (nCPs-AuNPs) was achieved in a short period of time (5-10 min), by applying high-energy ultrasound to an aqueous mixture of a CP precursor monomer and KAuCl4, in the presence of LiClO4 as dopant. The synthesis process is simpler, greener and faster in comparison to other procedures reported in the literature. Remarkably, bulk quantities of doped polyaniline PANI-AuNPs nanofibers were obtained. Subsequently, they were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR), as well as by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). PANI-AuNPs nanofibers were also employed as immobilization matrix for a benchmark enzyme, glucose oxidase (GOX). Finally, glucose was determined in real samples of white and red wines by using the so-obtained GOX-PANI-AuNPs/Sonogel-Carbon biosensor, providing outstanding recoveries (99.54%). This work may offer important insights into the synthesis of nanostructured conducting polymers and also stimulates the exploration of the applications of these nanocomposites, especially in research fields such as (bio)sensors, catalysis and composite materials.