Food waste valorization: Biofuels and value added product recovery

Brazilian Food Waste as a Substrate for Bioethanol Production

Food waste (FW) is a common source of contamination, contaminating both soils and water bodies by releasing greenhouse gases. FW holds great potential for biofuel and bioproduct production, which can mitigate its environmental impact and become a valuable addition to the circular bioeconomy. Therefore, this work aimed to investigate the use of food waste as a substrate to produce fermentable sugars and bioethanol. FW was pretreated by lipid removal. Raw and treated FW was hydrolyzed by amylases. Also, FW was hydrolyzed using sulfuric acid under different residence times (20, 40, and 60 min), sulfuric acid concentrations (0.5, 1.0, and 1.5% v·v-1), solid loads (5, 10, and 15% m·v-1), and temperatures (111, 120, and 127 °C). The best reducing sugar concentration was obtained at a 1.5% concentration of sulfuric acid and a 15% solid load applied for 1 h at 127 °C. The acid hydrolysis process was more efficient (76.26% efficiency) than the enzymatic one (72.7%). Bioethanol production was carried out as static submerged fermentation, with Saccharomyces cerevisiae at 10% (humidity m·v-1) being used as the producer and the acid and enzymatic hydrolysates being used as carbon sources. Lipid removal from FW did not influence the acid or enzymatic hydrolytic processes. For fermentation, the highest bioethanol yield was obtained from the acid hydrolysate of raw FW (0.49 kg·kg glicose-1). Thus, the processes used were efficient for bioethanol production, presenting alternatives for sustainable food waste destinations and low-cost biofuel production.

Innovative Strategies for Upcycling Agricultural Residues and Their Various Pharmaceutical Applications

This review investigates innovative strategies for upcycling agricultural residues into valuable pharmaceutical compounds. The improper disposal of agricultural residues contributes to significant environmental issues, including increased greenhouse gas emissions and ecosystem degradation. Upcycling offers a sustainable solution, transforming these residues into high-value bioproducts (antioxidants, antitumor agents, antidiabetic compounds, anti-inflammatory agents, and antiviral drugs). Nanotechnology and microbial biotechnology have a crucial role in enhancing bioavailability and targeted delivery of bioactive compounds. Advanced techniques like enzymatic hydrolysis, green solvents, microwave processing, pyrolysis, ultrasonic processing, acid and alkaline hydrolysis, ozonolysis, and organosolv processes are explored for their effectiveness in breaking down agricultural waste and extracting valuable compounds. Despite the promising potential, challenges such as variability in residue composition, scalability, and high costs persist. The review emphasizes the need for future research on cost-effective extraction techniques and robust regulatory frameworks to ensure the safety, efficacy, and quality of bioproducts. The upcycling of agricultural residues represents a viable path towards sustainable waste management and production of pharmaceutical compounds, contributing to environmental conservation and public health improvements. This review provides an analysis of the current literature and identifies knowledge gaps, offering recommendations for future studies to optimize the use of agricultural residues in the drug industry.

State-of-the-art review on hydrogen's production, storage, and potential as a future transportation fuel

Global energy consumption is expected to reach 911 BTU by the end of 2050 as a result of rapid urbanization and industrialization. Hydrogen is increasingly recognized as a clean and reliable energy vector for decarbonization and defossilization across various sectors. Projections indicate a significant rise in global demand for hydrogen, underscoring the need for sustainable production, efficient storage, and utilization. In this state-of-the-art review, we explore hydrogen production methods, compare their environmental impacts through life cycle analysis, delve into geological storage options, and discuss hydrogen's potential as a future transportation fuel. Combining electrolysis to make hydrogen and storing it in porous underground materials like salt caverns and geological reservoirs looks like a good way to balance out the variable supply of renewable energy and meet the demand at peak times. Hydrogen is a key component of our sustainable economy, and this article gives a broad overview of the process from production to consumption, touching on technical, economic, and environmental concerns along the way. We have made an attempt in this paper to compile different methods for the production of hydrogen and its storage, the challenges faced by current methods in the manufacturing of hydrogen gas, and the role of hydrogen in the future. This review paper will serve as a very good reference for hydrogen system engineering applications. The paper concludes with some suggestions for future research to help improve the technological efficiency of certain production methods, all with the goal of scaling up the hydrogen economy.

Comparison of Different Pretreatment Processes Envisaging the Potential Use of Food Waste as Microalgae Substrate

A significant fraction of the food produced worldwide is currently lost or wasted throughout the supply chain, squandering natural and economic resources. Food waste valorization will be an important necessity in the coming years. This work investigates the ability of food waste to serve as a viable nutritional substrate for the heterotrophic growth of Chlorella vulgaris. The impact of different pretreatments on the elemental composition and microbial contamination of seven retail food waste mixtures was evaluated. Among the pretreatment methods applied to the food waste formulations, autoclaving was able to eliminate all microbial contamination and increase the availability of reducing sugars by 30%. Ohmic heating was also able to eliminate most of the contaminations in the food wastes in shorter time periods than autoclave. However, it has reduced the availability of reducing sugars, making it less preferable for microalgae heterotrophic cultivation. The direct utilization of food waste containing essential nutrients from fruits, vegetables, dairy and bakery products, and meat on the heterotrophic growth of microalgae allowed a biomass concentration of 2.2 × 108 cells·mL-1, being the culture able to consume more than 42% of the reducing sugars present in the substrate, thus demonstrating the economic and environmental potential of these wastes.

Enhanced thermophilic dark fermentation of hydrogen production from food waste by Fe-modified biochar

The industrialization of hydrogen production through dark fermentation of food waste faces challenges, such as low yields and unpredictable fermentation processes. Biochar has emerged as a promising green additive to enhance hydrogen production in dark fermentation. Our study demonstrated that the introduction of Fe-modified biochar (Fe-L600) significantly boosted hydrogen production during thermophilic dark fermentation of food waste. The addition of Fe-L600 led to a remarkable 31.19% increase in hydrogen yield and shortened the time needed for achieving stabilization of hydrogen production from 18 h to 12 h. The metabolite analysis revealed an enhancement in the butyric acid pathway as the molar ratio of acetic acid to butyric acid decreased from 3.09 to 2.69 but hydrogen yield increased from 57.12 ± 1.48 to 76.78 ± 2.77 mL/g, indicating Fe-L600 improved hydrogen yield by regulating crucial metabolic pathways of hydrogen production. The addition of Fe-L600 also promoted the release of Fe2+ and Fe3+ and increased the concentrations of Fe2+ and Fe3+ in the fermentation system, which might promote the activity of hydrogenase and ferredoxin. Microbial community analysis indicated a substantial increase in the relative abundance of Thermoanaerobacterium after thermophilic dark fermentation. The relative abundances of microorganisms responsible for hydrolysis and acidogenesis were also observed to be improved in the system with Fe-L600 addition. This research provides a feasible strategy for improving hydrogen production of food waste and deepens the understanding of the mechanisms of biochar.

Comparative analysis of hydrogen production and bacterial communities in mesophilic and thermophilic consortia using multiple inoculum sources

This study investigates the hydrogen (H2) production performance and bacterial communities in mesophilic (37 °C) and thermophilic (50 °C) H2-producing consortia derived from different inoculum sources and utilizing food waste as a substrate. This study found notable variations in H2 production characteristics among these consortia. Among the mesophilic consortia (MC), the W-MC obtained with wetland (W) as the inoculum source exhibited the highest hydrogen production (3900 mL·L-1 and 117 mL·L-1·h-1), while among the thermophilic consortia (TC), the FP-TC obtained with forest puddle sediment (FP) as the inoculum source showed the highest performance (2112 mL·L-1 and 127 mL·L-1·h-1). This study reveals that the choice of inoculum source plays a crucial role in determining hydrogen production efficiency. Furthermore, the bacterial community analysis demonstrated varying microbial diversity and richness in different inoculum sources. Clostridium, a well-known H2-producing bacterium, was found in both mesophilic and thermophilic consortia and showed a positive correlation with H2 production. Other bacteria, such as Sporanaerobacter, Caproiciproducens, and Caldibacillus, also exhibited significant correlations with H2 production, suggesting their potential roles in the process. The study highlights the complex interactions between bacterial communities and hydrogen production performance, shedding light on the critical factors influencing this renewable energy source. Overall, this study contributes to our understanding of the microbial ecology and the factors affecting hydrogen production in different temperature conditions, which can have practical implications for optimizing biohydrogen production processes using organic waste substrates.

Hotspots and bottlenecks for the enhancement of the environmental sustainability of pig systems, with emphasis on European pig systems

Although pig systems start from a favourable baseline of environmental impact compared to other livestock systems, there is still scope to reduce their emissions and further mitigate associated impacts, especially in relation to nitrogen and phosphorous emissions. Key environmental impact hotspots of pig production systems are activities associated with feed production and manure management, as well as direct emissions (such as methane) from the animals and energy use. A major contributor to the environmental impacts associated with pig feed is the inclusion of soya in pig diets, especially since European pig systems rely heavily on soya imported from areas of the globe where crop production is associated with significant impacts of land use change, deforestation, carbon emissions, and loss of biodiversity. The "finishing" pig production stage contributes most to these environmental impacts, due to the amount of feed consumed, the efficiency with which feed is utilised, and the amount of manure produced during this stage. By definition therefore, any substantial improvements pig system environmental impact would arise from changes in feed production and manure management. In this paper, we consider potential solutions towards system environmental sustainability at these pig system components, as well as the bottlenecks that inhibit their effective implementation at the desired pace and magnitude. Examples include the quest for alternative protein sources to soya, the limits (perceived or real) to the genetic improvement of pigs, and the implementation of alternative manure management strategies, such as production of biogas through anaerobic digestion. The review identifies and discusses areas that future efforts can focus on, to further advance understanding around the potential sustainability benefits of modifications at various pig system components, and key sustainability trade-offs across the environment-economy-society pillars associated with synergistic and antagonistic effects when joint implementation of multiple solutions is considered. In this way, the review opens a discussion to facilitate the development of holistic decision support tools for pig farm management that account for interactions between the "feed * animal * manure" system components and trade-offs between sustainability priorities (e.g., environmental vs economic performance of pig system; welfare improvements vs environmental impacts).

Sustainable biohydrogen production from lignocellulosic biomass sources - metabolic pathways, production enhancement, and challenges

Hydrogen production from biological processes has been hailed as a promising strategy for generating sustainable energy. Fermentative hydrogen production processes such as dark and photofermentation are considered more sustainable and economical than other biological methods such as biophotolysis. However, these methods have constraints such as low hydrogen yield and conversion efficiency, so practical implementations still need to be made. The present review provides an assessment and feasibility of producing biohydrogen through dark and photofermentation techniques utilizing various lignocellulosic biomass wastes as substrates. Furthermore, this review includes information about the strategies to increase the productivity rate of biohydrogen in an eco-friendly and sustainable manner, like integration of dark and photofermentation techniques, pretreatment of biomass, genetic modification of microorganisms, and application of nanoadditives.

Upcycling post-harvest biomass residues from native European Lupinus species: from straws and pod shells production to nutritive value and alkaloids content for ruminant animals

The production of Lupinus seeds for food and feed is increasing worldwide, which results in large amounts of post-harvest biomass residues, considered of low value and left in the field to be burned or incorporated in the soil. To valorize these agricultural wastes, this work aimed to assess their potential as an alternative feed for ruminants. Thus, the production yield, nutritive value, and alkaloid content of straws and pod shells from three native European Lupinus species, L. albus 'Estoril' (white), L. angustifolius 'Tango' (narrow-leafed), and L. luteus 'Cardiga' (yellow), cultivated in two locations, were evaluated. The dry matter (DM) yield of straws and pod shells were the highest for L. albus 'Estoril' (4.10 t ha^-1) and the lowest for L. angustifolius 'Tango' (1.78 t ha^-1), suggesting a poor adaptation of narrow-leafed lupin to the particularly dry and warm agronomic year. Despite species-specific differences, lupin biomass residues presented higher crude protein (53.0-68.9 g kg^-1 DM) and lignin (103-111 g kg^-1 DM) content than cereal straws usually used in ruminant feeding, thus resulting in higher metabolizable energy (6.43-6.58 MJ kg^-1 DM) content. In vitro digestibility was similar among lupin species (47.7-50.6%) and higher in pod shells (53.7%) than in straws (44.6%). Lupinus albus 'Estoril' and L. luteus 'Cardiga' presented considerable amounts of alkaloids in straws (23.9 and 119 mg kg^-1 DM) and pod shells (20.5 and 298 mg kg^-1 DM), while no alkaloids were detected in L. angustifolius 'Tango' biomass residues. Considering the combined production of straw and pod shells per lupin species, it is anticipated that lupin biomass residues produced per ha can fulfill 85% of the energy and nearly 50% of protein requirements of a flock of 4 to 9 dry and mid-pregnancy sheep with 50 kg body weight for one year. No negative effects on small (ovine) and large (bovine) ruminant species due to alkaloids are expected, even if biomass residues are consumed at up to 85% DM intake. The large production yield along with its nutritive value unveils the potential of lupin biomass residues valorization as alternative fodder for ruminants, promoting sustainability under a circular economy approach.

Value Addition Employing Waste Bio-Materials in Environmental Remedies and Food Sector

Overall, combating food waste necessitates a multifaceted approach that includes education, infrastructure, and policy change. By working together to implement these strategies, we can help reduce the negative impacts of food waste and create a more sustainable and equitable food system. The sustained supply of nutrient-rich agrifood commodities is seriously threatened by inefficiencies caused by agricultural losses, which must be addressed. As per the statistical data given by the Food and Agriculture Organisation (FAO) of the United Nations, nearly 33.33% of the food that is produced for utilization is wasted and frittered away on a global level, which can be estimated as a loss of 1.3 billion metric tons per annum, which includes 30% cereals, 20% dairy products 35% seafood and fish, 45% fruits and vegetables, and 20% of meat. This review summarizes the various types of waste originating from various segments of the food industry, such as fruits and vegetables, dairy, marine, and brewery, also focusing on their potential for developing commercially available value-added products such as bioplastics, bio-fertilizers, food additives, antioxidants, antibiotics, biochar, organic acids, and enzymes. The paramount highlights include food waste valorization, which is a sustainable yet profitable alternative to waste management, and harnessing Machine Learning and Artificial Intelligence technology to minimize food waste. Detail of sustainability and feasibility of food waste-derived metabolic chemical compounds, along with the market outlook and recycling of food wastes, have been elucidated in this review.

A Review on the Challenges and Choices for Food Waste Valorization: Environmental and Economic Impacts

Valorization of food waste (FW) is instrumental for reducing the environmental and economic burden of FW and transitioning to a circular economy. The FW valorization process has widely been studied to produce various end-use products and summarize them; however, their economic, environmental, and social aspects are limited. This study synthesizes some of the valorization methods used for FW management and produces value-added products for various applications, and also discusses the technological advances and their environmental, economic, and social aspects. Globally, 1.3 billion tonnes of edible food is lost or wasted each year, during which about 3.3 billion tonnes of greenhouse gas is emitted. The environmental (-347 to 2969 kg CO₂ equiv/tonne FW) and economic (-100 to $138/tonne FW) impacts of FW depend on the multiple parameters of food chains and waste management systems. Although enormous efforts are underway to reduce FW as well as valorize unavoidable FW to reduce environmental and economic loss, it seems the transdisciplinary approach/initiative would be essential to minimize FW as well as abate the environmental impacts of FW. A joint effort from stakeholders is the key to reducing FW and the efficient and effective valorization of FW to improve its sustainability. However, any initiative in reducing food waste should consider a broader sustainability check to avoid risks to investment and the environment.

The Preparation Processes and Influencing Factors of Biofuel Production from Kitchen Waste

Kitchen waste is an important component of domestic waste, and it is both harmful and rich in resources. Approximately 1.3 billion tons of kitchen waste are produced every year worldwide. Kitchen waste is high in moisture, is readily decayed, and has an unpleasant smell. Environmental pollution can be caused if this waste is treated improperly. Conventional treatments of kitchen waste (e.g., landfilling, incineration and pulverization discharge) cause environmental, economic, and social problems. Therefore, the development of a harmless and resource-based treatment technology is urgently needed. Profits can be generated from kitchen waste by converting it into biofuels. This review intends to highlight the latest technological progress in the preparation of gaseous fuels, such as biogas, biohythane and biohydrogen, and liquid fuels, such as biodiesel, bioethanol, biobutanol and bio-oil, from kitchen waste. Additionally, the pretreatment methods, preparation processes, influencing factors and improvement strategies of biofuel production from kitchen waste are summarized. Problems that are encountered in the preparation of biofuels from kitchen waste are discussed to provide a reference for its use in energy utilization. Optimizing the preparation process of biofuels, increasing the efficiency and service life of catalysts for reaction, reasonably treating and utilizing the by-products and reaction residues to eliminate secondary pollution, improving the yield of biofuels, and reducing the cost of biofuels, are the future directions in the biofuel conversion of kitchen waste.

Poultry farmers' knowledge, attitude, and practices toward poultry waste management in Bangladesh

Background and Aim

The improper handling of poultry litter and waste poses risks to humans and environment by introducing certain compounds, elements, and pathogenic microorganisms into the surrounding environment and food chain. However, understanding the farmers' knowledge, attitude, and practices (KAP) could provide insights into the constraints that hinder the appropriate adoption of waste management. Therefore, this study aimed to assess poultry farmers' KAP regarding waste management issues.

Materials and Methods

A cross-sectional KAP study was conducted with native poultry keepers and small-scale commercial poultry farmers in seven districts of Bangladesh. In the survey, 385 poultry producers were interviewed using validated structured questionnaires through face-to-face interviews to collect the quantitative data in their domiciles.

Results

The overall KAP of farmers regarding poultry waste management issues demonstrated a low level of KAP (p = 0.001). The analysis shows that roughly 5% of farmers have a high level of knowledge of poultry waste management issues, followed by around one-third of respondents having a moderate level of knowledge. Considering the attitude domain, more than one-fifth of native poultry keepers and nearly two-thirds of commercial producers demonstrated a low level of attitude toward poultry waste management. Considering the overall analysis, roughly half of the respondents found a high level of attitude, and over half of the farmers showed a moderate level of attitude toward poultry waste management issues. The analysis showed that the level of good practices for native and commercial poultry production systems is estimated at 77.3% versus 45.9%, respectively, despite the farmers' lesser knowledge and attitudes toward poultry waste management systems. Overall, analysis showed that nearly 60% and 40% of poultry producers had high and moderate levels, respectively, of good practices in poultry waste management issues.

Conclusion

Analysis of the KAP data shows that farmers had a low level of KAP toward poultry waste management. The result of this study will assist in formulating appropriate strategies and to adopt poultry waste management solutions by poultry farmers to reduce environmental degradation.

Sonoprocessing: mechanisms and recent applications of power ultrasound in food

There is a growing interest in using green technologies in the food industry. As a green processing technique, ultrasound has a great potential to be applied in many food applications. In this review, the basic mechanism of ultrasound processing technology has been discussed. Then, ultrasound technology was reviewed from the application of assisted food processing methods, such as assisted gelation, assisted freezing and thawing, assisted crystallization, and other assisted applications. Moreover, ultrasound was reviewed from the aspect of structure and property modification technology, such as modification of polysaccharides and fats. Furthermore, ultrasound was reviewed to facilitate beneficial food reactions, such as glycosylation, enzymatic cross-linking, protein hydrolyzation, fermentation, and marination. After that, ultrasound applications in the food safety sector were reviewed from the aspect of the inactivation of microbes, degradation of pesticides, and toxins, as well inactivation of some enzymes. Finally, the applications of ultrasound technology in food waste disposal and environmental protection were reviewed. Thus, some sonoprocessing technologies can be recommended for the use in the food industry on a large scale. However, there is still a need for funding research and development projects to develop more efficient ultrasound devices.

Black soldier fly, Hermetia illucens as a potential innovative and environmentally friendly tool for organic waste management: A mini-review

The application of black soldier fly (BSF), Hermetia illucens based technology to process organic wastes presents a practical option for organic waste management by producing feed materials (protein, fat), biodiesel, chitin and biofertilizer. Therefore, BSF organic wastes recycling is a sustainable and cost-effective process that promotes resource recovery, and generates valuable products, thereby creating new economic opportunities for the industrial sector and entrepreneurs. Specifically, we discussed the significance of BSF larvae (BSFL) in the recycling of biowaste. Despite the fact that BSFL may consume a variety of wastes materials, whereas, certain lignocellulosic wastes, such as dairy manure, are deficient in nutrients, which might slow BSFL development. The nutritional value of larval feeding substrates may be improved by mixing in nutrient-rich substrates like chicken manure or soybean curd residue, for instance. Similarly, microbial fermentation may be used to digest lignocellulosic waste, releasing nutrients that are needed for the BSFL. In this mini-review, a thorough discussion has been conducted on the various waste biodegraded by the BSFL, their co-digestion and microbial fermentation of BSFL substrate, as well as the prospective applications and safety of the possible by-products that may be generated at the completion of the treatment process. Furthermore, this study examines the present gaps and challenges on the direction to the efficient application of BSF for waste management and the commercialization of its by-products.

Reintegration of Food Industry By-Products: Potential Applications

Numerous studies have indicated that fruits and vegetables are considered as significant sources of bioactive compounds. The generated by-products, which are derived from the food industry, reveal similar or higher antioxidant activity. On the other hand, intense industrialization results in the production of large volumes of by-products, raising serious environmental issues. Therefore, this situation creates the necessity to develop new strategies in order to exploit the generated wastes, securing the ability to develop new high-added-value products. This review aims to summarize the exploitation of fruit wastes, namely, apple and citrus, as well as vegetable by-products which are derived from tomato, potato and carrot cultivation. All the aforementioned by-products have found wide applications in the development of new high-added-value products in the food and feed industry owing to their improved nutritional profiles. Furthermore, these wastes are characterized by a strong antioxidant activity, justifying their valorization in other fields such as cosmetics and pharmaceutical industries.

Dehydrated Food Waste for Composting: An Overview

Food waste disposal has recently received much attention worldwide due to its major impact on environmental pollution and economic costs. Using high moisture content of food waste has the highest negative environmental impact due to increased greenhouse gas emissions, odor, and leachate. Drying technologies play an important role in reducing the moisture content of food waste, which is necessary for environmental sustainability and safety. The first part of this review highlights that sun-drying is the most cost-effective drying method. However, it has not been widely recommended for food waste management due to several limitations, including the inability to control sunray temperature and the inability to control end-product quality. Thermal drying eliminates moisture from food waste quickly, preventing hydrolysis and biodegradation. Thermal dryers, such as the GAIA GC-300 dryer, and cabinet dryer fitted with a standard tray, are the best alternative to sun drying. The second part of this review highlights that dehydrated food waste products are slightly acidic (4.7–5.1), have a high electrical conductivity (EC) value (4.83–7.64 mS cm-1), with high nutrient content, due to low pH levels, dehydrated food waste is not suitable for direct use as a fertilizer for the plants. So, the dried food waste should be composted before application to the plants because the composting process will dominate the limitation of phytotoxins, anoxia, salinity, and water repellence. Trench compost can be a good choice for decomposing dried organic waste because trench compost relies solely on soil decomposing microorganisms and insects.

Unraveling the metabolic shift in anaerobic digestion pathways associated with the alteration of onion skin waste concentration

Onion skin waste (OSW) is common waste in developing countries, which can cause severe environmental pollution when not properly treated. Value-added products can be chemically extracted from OSW; however, that process is not economically feasible. Alternatively, dry anaerobic digestion (DAD) of OSW is a promising approach for both energy recovery and environment protection. The main hurdles during DAD of OSW can be the hydrolysis and acidification. In batch tests, sludge digestate (SD) rich with methanogens was co-digested with different fractions of OSW for enhancing hydrolysis and raising biogas productivity. The cumulative biogas production (CBP) was 36.6 ± 0.3 mL for sole DAD of SD (100% SD) and increased up to 281.9 ± 14.1 mL for (50% SD: 50% OSW) batch. Self-delignification of OSW took place by SD addition, where the lignin removal reached 75.3 ± 10.5% for (85% SD: 15% OSW) batch. Increasing the fraction of OSW (45% SD: 55% OSW) reduced the delignification by a value of 68.8%, where initial lignin concentration was 9.48 ± 1.6% in dry weight. Lignin breaking down resulted a high fraction of phenolic compounds (345.6 ± 58.8 mg gallic acid equivalent/g dry weight) in the fermentation medium, causing CBP drop (219.0 ± 28.5 mL). The presence of elements (K, Ca, Mg, Fe, Zn, Mn, S and P) in OSW improved the enzymatic activity, facilitated phenolic compounds degradation, shifted the metabolism towards acetate fermentation pathway, and raised biogas productivity. Acidogenesis was less affected by phenolic compounds than methanogenesis, causing higher H₂ contents and lower CH₄ contents, at batches with high share of OSW.

Future of Hydrogen as an Alternative Fuel for Next-Generation Industrial Applications; Challenges and Expected Opportunities

A general rise in environmental and anthropogenically induced greenhouse gas emissions has resulted from worldwide population growth and a growing appetite for clean energy, industrial outputs, and consumer utilization. Furthermore, well-established, advanced, and emerging countries are seeking fossil fuel and petroleum resources to support their aviation, electric utilities, industrial sectors, and consumer processing essentials. There is an increasing tendency to overcome these challenging concerns and achieve the Paris Agreement’s priorities as emerging technological advances in clean energy technologies progress. Hydrogen is expected to be implemented in various production applications as a fundamental fuel in future energy carrier materials development and manufacturing processes. This paper summarizes recent developments and hydrogen technologies in fuel refining, hydrocarbon processing, materials manufacturing, pharmaceuticals, aircraft construction, electronics, and other hydrogen applications. It also highlights the existing industrialization scenario and describes prospective innovations, including theoretical scientific advancements, green raw materials production, potential exploration, and renewable resource integration. Moreover, this article further discusses some socioeconomic implications of hydrogen as a green resource.

Novel Approaches in the Valorization of Agricultural Wastes and Their Applications

Worldwide, a huge amount of agricultural food wastes and byproducts containing valuable bioactive compounds are generated, especially throughout the entire supply chain. Minimizing food wastes and byproducts is the first option to avoid environmental problems, and to help the economy and the society. Although many countries implement policies to reduce food wastes and byproducts, and different management methods are available to utilize agricultural food wastes, they are still produced annually. Nanotechnological and biotechnological approaches are recently used as novel and green applications to valorize agricultural food wastes and improve their stability and applicability. In this Review, these approaches are covered in detail with given examples. Another valorization way of consumable food waste is using it for functional food production. This Review focuses on specific examples of functional foods with food waste as an ingredient. In addition, the problems and limitations of waste management and valorization methods are investigated, considering future perspectives.

Techno-economic analysis of food waste valorization for integrated production of polyhydroxyalkanoates and biofuels

This study focused on the techno-economic analysis of integrated polyhydroxyalkanoates (PHAs) and biofuels such as biohydrogen, bioethanol, and 2,3-butanediol production from food waste (FW). Based on previous literature studies, the integrated process was developed. The process plan produced 2.01 MT of PHAs, 0.29 MT of biohydrogen, 4.79 MT of bioethanol, and 6.79 MT of 2,3-butanediol per day, from 50 MT of FW. The process plan has a positive net present value of 4.47 M$, a 13.68% return on investment, a payback period of 7.31 yr, and an internal rate of return of 11.95%. Sensitivity analysis was used to examine the economic feasibility. The actual minimum selling price (MSP) of PHAs was 4.83 $/kg, and the lowest achievable MSP with 30% solid loading is 2.41 $/kg. The solid loading in the hydrolysis stage and the price of byproducts have a major impact on the economic factors and MSP of PHAs.

Waste from Persea schiedeana Fruits as Potential Alternative for Biodiesel Production

Biodiesel is a mixture of monoalkyl esters of fatty acids derived from vegetable oils or animal fats. Agricultural residues are a potential source of raw materials for generating biofuels. The aim of this research was to determine the usefulness of Persea schiedeana Nees fruit as a potential source to be transformed into biodiesel by alkaline transesterification. In this sense, biodiesel was obtained using oil isolated from overripe fruits of P. schiedeana, damaged by the Heilipus lauri pest. The fruits were collected in the municipality of Huatusco, Veracruz, Mexico. The maceration of the fruits with hexane resulted in an oil with a high percentage of free fatty acids (8.36 ± 1.35%). The main components of the biodiesel were methyl oleate (53.12%) and methyl palmitate (25.74%). The dynamic viscosity of the biodiesel complies with ASTM D6751 and EN 14214 and the biodiesel blends with commercial diesel comply with ASTM D675, the calorific value showed an increase with increasing biodiesel concentration in the blends. This study demonstrates that the oil obtained from the overripe and surplus fruits of P. schiedeana is a viable feedstock for the production of a fuel to replace diesel.

Integrated polylactic acid and biodiesel production from food waste: Process synthesis and economics

In this study, techno-economic analysis of the sustainable production of polylactic acid (PLA) and biodiesel from Food Waste (FW), with a plant capacity of 50 tons/day, was investigated. In addition, FW of four countries (China, India, Brazil, and the USA) with different compositions of water, protein, lipid and carbohydrate were proposed. Each country has different PLA production rates based on carbohydrate and biodiesel production based on fat. In this study, the FW composition of the USA shows better economic feasibility than other countries. The actual minimum selling price is 6.53 (China), 5.35 (India), 4.75 (Brazil), and 4.29 (US) $/kg. The uncertainty of the MSP was analyzed based on various input limits. The sensitivity analysis was conducted based on biodiesel-selling price, PLA-selling price, income tax, and project lifetime on techno-economic analysis parameters, such as ROI, payback period, IRR and NPV were investigated.

Source separation, transportation, pretreatment, and valorization of municipal solid waste: a critical review

Waste sorting is an effective means of enhancing resource or energy recovery from municipal solid waste (MSW). Waste sorting management system is not limited to source separation, but also involves at least three stages, i.e., collection and transportation (C&T), pretreatment, and resource utilization. This review focuses on the whole process of MSW management strategy based on the waste sorting perspective. Firstly, as the sources of MSW play an essential role in the means of subsequent valorization, the factors affecting the generation of MSW and its prediction methods are introduced. Secondly, a detailed comparison of approaches to source separation across countries is presented. Constructing a top-down management system and incentivizing or constraining residents' sorting behavior from the bottom up is believed to be a practical approach to promote source separation. Then, the current state of C&T techniques and its network optimization are reviewed, facilitated by artificial intelligence (AI) and the Internet of Things technologies. Furthermore, the advances in pretreatment strategies for enhanced sorting and resource recovery are introduced briefly. Finally, appropriate methods to valorize different MSW are proposed. It is worth noting that new technologies, such as AI, show high application potential in waste management. The sharing of (intermediate) products or energy of varying processing units will inject vitality into the waste management network and achieve sustainable development.

Efficiency of microbial fuel cells in the treatment and energy recovery from food wastes: Trends and applications - A review

The rising global population and their food habits result in food wastage and cause an obstacle in its treatment and disposal. Due to the rapid shift in the lifestyle of the human population and urbanization, almost one-third of the food produced is wasted from various sectors like domestic sources, agricultural sectors, and industrial sectors. These food resources squandered are rich in organic biomolecules which can cause complications upon direct disposal in the environment. Conventional disposal methods like composting, landfills and incineration demand high costs besides causing severe environmental and health issues. To overcome these demerits of the conventional methods and to avoid the loss of rich organic food resources, there is an immediate need for a sustainable and eco-friendly solution for the valorization of the food wastes. Microbial fuel cells (MFCs) are gaining attention, due to their ideal approach in the production of electricity and parallel treatment of organic food wastes. The MFCs are significant as an innovative approach using microorganisms and oxidizing the organic food wastes into bio-electricity. In this review, the recent advancements and practices of the MFCs in the field of food waste treatment and management along with electricity production are discussed. The major outcome of this work highlights the setting up of MFC for the treatment of higher volumes of food waste residues and enhancing the bioelectricity production in an optimal condition. For further improvements in the food waste treatments using MFCs, greater understanding and more research needs are to be focused on the commercialization, different operational modes, operational types, and low-cost fabrication coupled with careful examination of scale-up factors.

Biogas Production by Pilot-Scale Anaerobic Co-Digestion and Life Cycle Assessment Using a Real Scale Scenario: Independent Parameters and Co-Substrates Influence

This study evaluates the performance of different agricultural by-products to identify the potential effect of independent variables, using as the dependent variable the biogas production. A Box–Behnken experimental design was carried out in a pilot-scale plant of four stirred stainless-steel digesters under mesophilic semi-continuous digestion. The results obtained support the creation of a technical framework to scale up the process and further evaluation of the potential environmental impacts through life cycle assessment (LCA) methodology. A stable behaviour was achieved in 12 of the 13 experiments proposed. The highest value of daily biogas production was 2200.15 mL day−1 with a stabilization time of 14 days, an organic loading rate of 4 g VS feed daily, low C/N ratio and a 1:1 relation of nitrogen providers. The concentrations of CH4 remained stable after the production stabilization and an average biogas composition of 60.6% CH4, 40.1% CO2 and 0.3% O2 was obtained for the conditions mentioned above. Therefore, the real scale plant was estimated to manage 2.67 tonnes of residual biomass per day, generating 369.69 kWh day−1 of electricity. The LCA analysis confirms that the co-digestion process evaluated is a feasible and environmentally sustainable option for the diversification of the Colombian energy matrix and the development of the agro-industrial sector.

Sustainable processing of food waste for production of bio-based products for circular bioeconomy

Sustainable development of circular bioeconomy concept is only possible upon adopting potential advanced technologies for food waste valorization. This approach can simultaneously answer resources and environmental challenges incurred due to capital loss and greenhouse gases accumulation. Food waste valorization opens new horizons of economical growth, bringing waste as an opportunity feedstock for bio processes to synthesize biobased products from biological source in a circular loop. Advanced technologies like Ultrasound assisted extraction, Microwave assisted extraction, bioreactors, enzyme immobilization assisted extraction and their combination mitigates the global concern caused due to mismanagement of food waste. Food waste decomposition to sub-zero level using advanced techniques fabricates food waste into bio-based products like bioactive compounds (antioxidants, pigments, polysaccharides, polyphenols, etc.); biofuels (biodiesel, biomethane, biohydrogen); and bioplastics. This review abridges merits and demerits of various advanced techniques extended for food waste valorization and contribution of food waste in revenue generation as value added products.

Oriented Fermentation of Food Waste towards High-Value Products: A Review

Food waste has a great potential for resource recovery due to its huge yield and high organic content. Oriented fermentation is a promising method with strong application prospects due to high efficiency, strong robustness, and high-value products. Different fermentation types lead to different products, which can be shifted by adjusting fermentation conditions such as inoculum, pH, oxidation-reduction potential (ORP), organic loading rate (OLR), and nutrients. Compared with other types, lactic acid fermentation has the lowest reliance on artificial intervention. Lactic acid and volatile fatty acids are the common products, and high yield and high purity are the main targets of food waste fermentation. In addition to operational parameters, reactors and processes should be paid more attention to for industrial application. Currently, continuously stirred tank reactors and one-stage processes are used principally for scale-up continuous fermentation of food waste. Electro-fermentation and iron-based or carbon-based additives can improve food waste fermentation, but their mechanisms and application need further investigation. After fermentation, the recovery of target products is a key problem due to the lack of green and economic methods. Precipitation, distillation, extraction, adsorption, and membrane separation can be considered, but the recovery step is still the most expensive in the entire treatment chain. It is expected to develop more efficient fermentation processes and recovery strategies based on food waste composition and market demand.