Ex vivo construction of human primary 3D-networked osteocytes

Development of a BMU-on-a-chip model based on spatiotemporal regulation of cellular interactions in the bone remodeling cycle

Bone remodeling is essential for maintaining bone homeostasis throughout life by replacing old bone with new tissue. This dynamic process occurs continuously within basic multicellular unit (BMU) through well-coordinated interactions among osteocytes, osteoblasts, and osteoclasts. However, a precise in vitro model that accurately replicates this mechanism has not yet been developed. In this study, we created a human in vitro BMU-modeling chip platform by tri-culturing cells within a chip unit integrated into a tissue culture well plate, enabling high-throughput three-dimensional (3D) cell culture. To establish the tri-culture, human osteoblasts were isolated from human surgical bone samples and differentiated into osteocytes within collagen gel inside the chip unit. Subsequently, osteoblasts and peripheral blood mononuclear cells (PBMCs) containing osteoclast precursors were added to the chip unit. To simulate each phase of the bone remodeling cycle, we optimized the tri-culture process by adjusting the timing and using two types of osteoblasts at different stages of differentiation. The completed tri-culture model successfully mimicked the bone formation phase. When receptor activators of nuclear factor kappa-Β (RANKL) and macrophage colony-stimulating factor (M-CSF) were introduced, the cells exhibited characteristics of the reversal phase, where osteogenic and osteoclastogenic environments coexist. Additionally, using more differentiated osteoblasts within the tri-culture platform induced osteoclast differentiation, resembling the bone resorption phase. Overall, our model effectively replicates each phase of the bone remodeling cycle in BMUs, both spatially and temporally. This advancement not only facilitates the study of the intricate mechanisms of bone remodeling and cellular function but also aids drug development by providing a robust bone model for testing target drugs.

Cellnet technology to generate 3D, functional, single-cell networks in custom architectures within collagen

Cells possess the remarkable ability to generate tissue-specific 3D interconnected networks and respond to a wide range of stimuli. Understanding the link between the spatial arrangement of individual cells and their networks' emergent properties is necessary for the discovery of both fundamental biology as well as applied therapeutics. However, current methods spanning from lithography to 3D photo-patterning to acoustofluidic devices are unable to generate interconnected and organized single cell 3D networks within native extracellular matrix (ECM). To address this challenge, we report a novel technology coined as Cellnet. This involves the use of natural collagen crosslinked within three-chambered microfluidic chips followed by femtosecond laser-assisted cavitation to generate user-defined 3D microchannel networks. Model cells, seeded within side chamber of the chip, migrate within microchannel networks within hours, self-organize and form viable, interconnected, 3D single-cell networks in custom architectures such as square grid, concentric circle, parallel lines, and spiral patterns. Heterotypic Cellnets can also be generated by seeding multiple cell types in side-chambers of the chip. The functionality of cell networks can be studied by monitoring the real-time calcium signaling response of individual cells and signal propagation within Cellnets when subjected to flow stimulus alone or a sequential combination of flow and biochemical stimuli. Furthermore, user-defined disrupted Cellnets can be generated by lethally injuring target cells within the 3D network and analyzing the changes in their signaling dynamics. As compared to the current self-assembly based methods that exhibit high variability and poor reproducibility, Cellnets can generate organized 3D single-cell networks and their real-time signaling responses to a range of stimuli can be accurately captured using simple cell seeding and easy-to-handle microfluidic chips. Cellnet technology, agnostic of cell types, ECM formulations, 3D cell-connectivity designs, or location and timing of network disruptions, could pave the way to address a range of fundamental and applied bioscience applications.

High-Throughput Preosteoblastic Spheroids Elevate Fibroblast Growth Factor 23 via Parathyroid Hormone Signaling Pathway

Fibroblast growth factor 23 (FGF23) plays a crucial role in managing renal phosphate and the synthesis of 1,25(OH)2-vitamin D3, which is essential for bone homeostasis. Developing robust in vitro systems to study FGF23-regulating mechanisms is crucial for advancing our knowledge and identifying potential therapeutic targets. The traditional in vitro 2D culture system results in relatively low expression of FGF23, complicating further exploration of its regulatory mechanisms and potential therapeutic targets. Herein, we reported a high-throughput approach to generate preosteoblastic cell spheroids with enhanced FGF23 production. For this purpose, murine preosteoblast cell line (MC3T3-E1) was cultured in our previously reported nonadherent microwells (200 µm in diameter, 148 µm in depth, and 100 µm space in between) and self-assembled into spheroids with a diameter of 92.3 ± 15.0 µm after 24 h. Compared with monolayer culture, the MC3T3-E1 spheroids showed a significant upregulation of FGF23 in both gene and protein levels after 24 h of serum-free induction. RNA sequencing and western blotting analysis further suggested that the enhanced FGF23 production in MC3T3-E1 spheroids was attributed to the activation of the parathyroid hormone (PTH)/PTH1R signaling pathway. Impressively, inhibition of PTH signaling through small molecular inhibitors or short hairpin RNA targeting PTH1R effectively reduced FGF23 production. In summary, the current study revealed the efficacy of the high-throughput formation of preosteoblast cell spheroid in stimulating FGF23 expression for mechanistic studies. Importantly, our findings highlight the potential of the current 3D spheroid system for target identification and drug discovery.

CELLNET technology: Spatially organized, functional 3D networks at single cell resolution

Cells possess the remarkable ability to generate tissue-specific 3D interconnected networks and respond to a wide range of stimuli. Understanding the link between the spatial arrangement of individual cells and their networks' emergent properties is necessary for the discovery of both fundamental biology as well as applied therapeutics. However, current methods spanning from lithography to 3D photo-patterning to acoustofluidic devices are unable to generate interconnected and organized single cell 3D networks within native extracellular matrix (ECM). To address this challenge, we report a novel technology coined as CELLNET. This involves the generation of crosslinked collagen within multi-chambered microfluidic devices followed by femtosecond laser ablation of 3D microchannel networks and cell seeding. Using model cells, we show that cell migrate within ablated networks within hours, self-organize and form viable, interconnected, 3D networks in custom architectures such as square grid, concentric circle, parallel lines, and spiral patterns. Heterotypic CELLNETs can also be generated by seeding multiple cell types in side-chambers of the devices. The functionality of cell networks can be studied by monitoring the real-time calcium signaling response of individual cells and signal propagation within CELLNETs when subjected to flow stimulus alone or a sequential combination of flow and biochemical stimuli. Furthermore, user-defined disrupted CELLNETs can be generated by lethally injuring target cells within the 3D network and analyzing the changes in their signaling dynamics. As compared to the current self-assembly based methods that exhibit high variability and poor reproducibility, CELLNETs can generate organized 3D single-cell networks and their real-time signaling responses to a range of stimuli can be accurately captured using simple cell seeding and easy-to-handle microfluidic devices. CELLNET, a new technology agnostic of cell types, ECM formulations, 3D cell-connectivity designs, or location and timing of network disruptions, could pave the way to address a range of fundamental and applied bioscience applications.

Teaser

New technology to generate 3D single cell interconnected and disrupted networks within natural extracellular matrix in custom configurations.

Osteocyte-Like Cells Differentiated From Primary Osteoblasts in an Artificial Human Bone Tissue Model

In vitro models of primary human osteocytes embedded in natural mineralized matrix without artificial scaffolds are lacking. We have established cell culture conditions that favored the natural 3D orientation of the bone cells and stimulated the cascade of signaling needed for primary human osteoblasts to differentiate into osteocytes with the characteristically phenotypical dendritic network between cells. Primary human osteoblasts cultured in a 3D rotating bioreactor and incubated with a combination of vitamins A, C, and D for up to 21 days produced osteospheres resembling native bone. Osteocyte-like cells were identified as entrapped, stellate-shaped cells interconnected through canaliculi embedded in a structured, mineralized, collagen matrix. These cells expressed late osteoblast and osteocyte markers such as osteocalcin (OCN), podoplanin (E11), dentin matrix acidic phosphoprotein 1 (DMP1), and sclerostin (SOST). Organized collagen fibrils, observed associated with the cell hydroxyapatite (HAp) crystals, were found throughout the spheroid and in between the collagen fibrils. In addition to osteocyte-like cells, the spheroids consisted of osteoblasts at various differentiation stages surrounded by a rim of cells resembling lining cells. This resemblance to native bone indicates a model system with potential for studying osteocyte-like cell differentiation, cross-talk between bone cells, and the mineralization process in a bonelike structure in vitro without artificial scaffolds. In addition, natural extracellular matrix may allow for the study of tissue-specific biochemical, biophysical, and mechanical properties. © 2023 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

In vitromodel to study confined osteocyte networks exposed to flow-induced mechanical stimuli

Osteocytes are considered the primary mechanical sensor in bone tissue and orchestrate the coupled bone remodeling activity of adjacent osteoblast and osteoclast cells.In vivoinvestigation of mechanically induced signal propagation through networks of interconnected osteocytes is confounded by their confinement within the mineralized bone matrix, which cannot be modeled in conventional culture systems. In this study, we developed a new model that mimics thisin vivoconfinement using gelatin methacrylate (GelMA) hydrogel or GelMA mineralized using osteoblast-like model cells. This model also enables real-time optical examination of osteocyte calcium (Ca2+) signaling dynamics in response to fluid shear stimuli cultured under confined conditions. Using this system, we discovered several distinct and previously undescribed patterns of Ca2+responses that vary across networks of interconnected osteocytes as a function of space, time and connectivity. Heterogeneity in Ca2+signaling may provide new insights into bone remodeling in response to mechanical loading. Overall, such a model can be extended to study signaling dynamics within cell networks exposed to flow-induced mechanical stimuli under confined conditions.

A Bioreactor for 3D In Vitro Modeling of the Mechanical Stimulation of Osteocytes

The bone is a mechanosensitive organ that is also a common metastatic site for prostate cancer. However, the mechanism by which the tumor interacts with the bone microenvironment to further promote disease progression remains to be fully understood. This is largely due to a lack of physiological yet user-friendly models that limit our ability to perform in-depth mechanistic studies. Here, we report a tunable bioreactor which facilitates the 3D culture of the osteocyte cell line, MLO-Y4, in a hydroxyapatite/tricalcium phosphate (HA/TCP) scaffold under constant fluidic shear stress and tunable hydrostatic pressure within physiological parameters. Increasing hydrostatic pressure was sufficient to induce a change in the expression of several bone remodeling genes such as Dmp1, Rankl, and Runx2. Furthermore, increased hydrostatic pressure induced the osteocytes to promote the differentiation of the murine macrophage cell line RAW264.7 toward osteoclast-like cells. These results demonstrate that the bioreactor recapitulates the mechanotransduction response of osteocytes to pressure including the measurement of their functional ability in a 3D environment. In conclusion, the bioreactor would be useful for exploring the mechanisms of osteocytes in bone health and disease.

Natural killer cells activity against multiple myeloma cells is modulated by osteoblast-induced IL-6 and IL-10 production

Background

Natural killer (NK) cells are part of the innate arm of the immune system; as such NK cells can be activated rapidly to target virus-infected cells and tumor cells without prior sensitization. The human NK-92MI cell line is among the most widely used NK cell in preclinical research studies and has also been approved for clinical applications. Previous studies have shown that osteoblasts (OSB) confer drug resistance in multiple myeloma (MM) and other cancers that metastasize to the bone marrow.

Aim

We evaluated here how OSB, which are bone forming cells and a key cellular component of the bone marrow microenvironment, modulate the cytotoxic activity of NK-92MI cells against the MM.1S multiple myeloma cell line.

Methods

The osteoblastic niche was recapitulated with either the osteoblastic cell line hFOB 1.19 (hFOB) or primary osteoblasts (P-OSB) derived from surgical resections. Time-lapse imaging was utilized to quantify changes in MM.1S cell viability under different conditions, including: (1) Co-culture of MM.1S with NK92MI cells, (2) triple-culture of hFOB or P-OSB with MM.1S and NK-92MI, and (3) MM.1S or NK-92MI cells primed with OSB-derived supernatant. Cytokine analysis was conducted to quantify potential secreted factors associated with the protective effects of OSB.

Results

The physical presence of OSB hindered the activity of NK-92MI cells, resulting in the increased viability of MM.1S compared to co-cultures which lacked OSB. This observation was accompanied by reduced perforin and granzyme A secretion from NK-92MI cells. Contact of OSB and NK-92MI cells also induced interleukin 6 (IL-6) and interleukin 10 (IL-10) production; two cytokines which are known to impair the NK cell immunity against MM and other cancers. OSB supernatant also conferred cytoprotection to MM.1S, suggesting a dual mechanism by which OSB may modulate both NK and MM cells.

Conclusions

We demonstrated here that OSB can negatively impact the activity of NK cells against MM. As NK cells and their chimeric antigen receptor-modified versions become more widely used in the clinic, our results suggest that understanding the role of OSB as potential immunoregulators of the NK cell-mediated cytotoxic response in the bone marrow tumor microenvironment may provide new opportunities for enhancing the effectiveness of this potent immunotherapeutic approach.

A Three-Dimensional Mechanical Loading Model of Human Osteocytes in Their Native Matrix

Osteocytes are mechanosensory cells which are embedded in calcified collagenous matrix. The specific native matrix of osteocytes affects their regulatory activity, i.e., transmission of signaling molecules to osteoclasts and/or osteoblasts, in the mechanical adaptation of bone. Unfortunately, no existing in vitro model of cortical bone is currently available to study the mechanosensory function of human osteocytes in their native matrix. Therefore, we aimed to develop an in vitro three-dimensional mechanical loading model of human osteocytes in their native matrix. Human cortical bone explants containing osteocytes in their three-dimensional native matrix were cultured and mechanically loaded by three-point bending using a custom-made loading apparatus generating sinusoidal displacement. Osteocyte viability and sclerostin expression were measured 1-2 days before 5 min loading and 1 day after loading. Bone microdamage was visualized and quantified by micro-CT analysis and histology using BaSO₄ staining. A linear relationship was found between loading magnitude (2302-13,811 µɛ) and force (1.6-4.9 N) exerted on the bone explants. At 24 h post-loading, osteocyte viability was not affected by 1600 µɛ loading. Sclerostin expression and bone microdamage were unaffected by loading up to 8000 µɛ. In conclusion, we developed an in vitro 3D mechanical loading model to study mechanoresponsiveness of viable osteocytes residing in their native matrix. This model is suitable to study the effect of changed bone matrix composition in metabolic bone disease on osteocyte mechanoresponsiveness.

Triple Culture of Primary Human Osteoblasts, Osteoclasts and Osteocytes as an In Vitro Bone Model

In vitro evaluation of bone graft materials is generally performed by analyzing the interaction with osteoblasts or osteoblast precursors. In vitro bone models comprising different cell species can give specific first information on the performance of those materials. In the present study, a 3D co-culture model was established comprising primary human osteoblasts, osteoclasts and osteocytes. Osteocytes were differentiated from osteoblasts embedded in collagen gels and were cultivated with osteoblast and osteoclasts seeded in patterns on a porous membrane. This experimental setup allowed paracrine signaling as well as separation of the different cell types for final analysis. After 7 days of co-culture, the three cell species showed their typical morphology and gene expression of typical markers like ALPL, BSPII, BLGAP, E11, PHEX, MEPE, RANKL, ACP5, CAII and CTSK. Furthermore, relevant enzyme activities for osteoblasts (ALP) and osteoclasts (TRAP, CTSK, CAII) were detected. Osteoclasts in triple culture showed downregulated TRAP (ACP5) and CAII expression and decreased TRAP activity. ALP and BSPII expression of osteoblasts in triple culture were upregulated. The expression of the osteocyte marker E11 (PDPN) was unchanged; however, osteocalcin (BGLAP) expression was considerably downregulated both in osteoblasts and osteocytes in triple cultures compared to the respective single cultures.

Designing Hydrogel-Based Bone-On-Chips for Personalized Medicine

The recent development of bone-on-chips (BOCs) holds the main advantage of requiring a low quantity of cells and material, compared to traditional In Vitro models. By incorporating hydrogels within BOCs, the culture system moved to a three dimensional culture environment for cells which is more representative of bone tissue matrix and function. The fundamental components of hydrogel-based BOCs, namely the cellular sources, the hydrogel and the culture chamber, have been tuned to mimic the hematopoietic niche in the bone aspirate marrow, cancer bone metastasis and osteo/chondrogenic differentiation. In this review, we examine the entire process of developing hydrogel-based BOCs to model In Vitro a patient specific situation. First, we provide bone biological understanding for BOCs design and then how hydrogel structural and mechanical properties can be tuned to meet those requirements. This is followed by a review on hydrogel-based BOCs, developed in the last 10 years, in terms of culture chamber design, hydrogel and cell source used. Finally, we provide guidelines for the definition of personalized pathological and physiological bone microenvironments. This review covers the information on bone, hydrogel and BOC that are required to develop personalized therapies for bone disease, by recreating clinically relevant scenarii in miniaturized devices.

Osteon: Structure, Turnover, and Regeneration

Bone is composed of dense and solid cortical bone and honeycomb-like trabecular bone. Although cortical bone provides the majority of mechanical strength for a bone, there are few studies focusing on cortical bone repair or regeneration. Osteons (the Haversian system) form structural and functional units of cortical bone. In recent years, emerging evidences have shown that the osteon structure (including osteocytes, lamellae, lacunocanalicular network, and Haversian canals) plays critical roles in bone mechanics and turnover. Therefore, reconstruction of the osteon structure is crucial for cortical bone regeneration. This article provides a systematic summary of recent advances in osteons, including the structure, function, turnover, and regenerative strategies. First, the hierarchical structure of osteons is illustrated and the critical functions of osteons in bone dynamics are introduced. Next, the modeling and remodeling processes of osteons at a cellular level and the turnover of osteons in response to mechanical loading and aging are emphasized. Furthermore, several bioengineering approaches that were recently developed to recapitulate the osteon structure are highlighted. Impact statement This review provides a comprehensive summary of recent advances in osteons, especially the roles in bone formation, remodeling, and regeneration. Besides introducing the hierarchical structure and critical functions of osteons, we elucidate the modeling and remodeling of osteons at a cellular level. Specifically, we highlight the bioengineering approaches that were recently developed to mimic the hierarchical structure of osteons. We expect that this review will provide informative insights and attract increasing attentions in orthopedic community, shedding light on cortical bone regeneration in the future.

Cell Sources for Human In vitro Bone Models

PURPOSE OF REVIEW

One aim in bone tissue engineering is to develop human cell-based, 3D in vitro bone models to study bone physiology and pathology. Due to the heterogeneity of cells among patients, patient's own cells are needed to be obtained, ideally, from one single cell source. This review attempts to identify the appropriate cell sources for development of such models.

RECENT FINDINGS

Bone marrow and peripheral blood are considered as suitable sources for extraction of osteoblast/osteocyte and osteoclast progenitor cells. Recent studies on these cell sources have shown no significant differences between isolated progenitor cells. However, various parameters such as medium composition affect the cell's proliferation and differentiation potential which could make the peripheral blood-derived stem cells superior to the ones from bone marrow. Peripheral blood can be considered a suitable source for osteoblast/osteocyte and osteoclast progenitor cells, being less invasive for the patient. However, more investigations are needed focusing on extraction and differentiation of both cell types from the same donor sample of peripheral blood.

Organ-on-a-chip platforms for accelerating the evaluation of nanomedicine

Nanomedicine involves the use of engineered nanoscale materials in an extensive range of diagnostic and therapeutic applications and can be applied to the treatment of many diseases. Despite the rapid progress and tremendous potential of nanomedicine in the past decades, the clinical translational process is still quite slow, owing to the difficulty in understanding, evaluating, and predicting nanomaterial behaviors within the complex environment of human beings. Microfluidics-based organ-on-a-chip (Organ Chip) techniques offer a promising way to resolve these challenges. Sophisticatedly designed Organ Chip enable in vitro simulation of the in vivo microenvironments, thus providing robust platforms for evaluating nanomedicine. Herein, we review recent developments and achievements in Organ Chip models for nanomedicine evaluations, categorized into seven broad sections based on the target organ systems: respiratory, digestive, lymphatic, excretory, nervous, and vascular, as well as coverage on applications relating to cancer. We conclude by providing our perspectives on the challenges and potential future directions for applications of Organ Chip in nanomedicine.

•

Microfluidics-based organ-on-a-chip (Organ Chip) techniques offer a promising way to understand, evaluate, and predict nanomedicine behaviors within the complex environment.

•

Organ Chip models for nanomedicine evaluations are categorized into seven broad sections based on the targeted body systems.

•

Limitations, challenges, and perspectives of Organ Chip for accelerating the assessment of nanomedicine are discussed, respectively.

New and Old Osteocytic Cell Lines and 3D Models

The aim of this review was to compile a list of tools currently available to study bone cells and in particular osteocytes. As the interest (and importance) in osteocyte biology has greatly expanded over the past decade, new tools and techniques have become available to study these elusive cells, RECENT FINDINGS: Osteocytes are the main orchestrators of bone remodeling. They control both osteoblasts and osteoclast activities via cell-to cell communication or through secreted factors. Osteocytes are also the mechanosensors of the bone and they orchestrate skeletal adaptation to loads. Recent discoveries have greatly expanded our knowledge and understanding of these cells and new models are now available to further uncover the functions of osteocytes. Novel osteocytic cell lines, primary cultures, and 3D scaffolds are now available to investigators to further unravel the functions and roles of these cells.

Primary Human Osteoblasts Cultured in a 3D Microenvironment Create a Unique Representative Model of Their Differentiation Into Osteocytes

Microengineered systems provide an in vitro strategy to explore the variability of individual patient response to tissue engineering products, since they prefer the use of primary cell sources representing the phenotype variability. Traditional in vitro systems already showed that primary human osteoblasts embedded in a 3D fibrous collagen matrix differentiate into osteocytes under specific conditions. Here, we hypothesized that translating this environment to the organ-on-a-chip scale creates a minimal functional unit to recapitulate osteoblast maturation toward osteocytes and matrix mineralization. Primary human osteoblasts were seeded in a type I collagen hydrogel, to establish the role of lower (2.5 × 10⁵ cells/ml) and higher (1 × 10⁶ cells/ml) cell density on their differentiation into osteocytes. A custom semi-automatic image analysis software was used to extract quantitative data on cellular morphology from brightfield images. The results are showing that cells cultured at a high density increase dendrite length over time, stop proliferating, exhibit dendritic morphology, upregulate alkaline phosphatase (ALP) activity, and express the osteocyte marker dental matrix protein 1 (DMP1). On the contrary, cells cultured at lower density proliferate over time, do not upregulate ALP and express the osteoblast marker bone sialoprotein 2 (BSP2) at all timepoints. Our work reveals that microengineered systems create unique conditions to capture the major aspects of osteoblast differentiation into osteocytes with a limited number of cells. We propose that the microengineered approach is a functional strategy to create a patient-specific bone tissue model and investigate the individual osteogenic potential of the patient bone cells.

An improved method to isolate primary human osteocytes from bone

Osteocytes are of high importance in bone metabolism as they orchestrate bone remodeling, react to mechanosensory stimuli and have endocrine functions. In vitro investigations with osteocytes are therefore of high relevance for biomaterial and drug testing. The application of primary human cells instead of rodent osteocyte cell lines like MLOY4 and IDG SW3 is desirable but provides the challenge of isolating these cells, which are deeply embedded into the mineralized bone matrix. The present study describes an improved protocol for the isolation of human primary osteocytes. In contrast to an already established protocol, resting steps between the demineralization /digestion steps of the bone particles considerably improved the yield of osteocytes. Real-time polymerase chain reaction (PCR) analysis revealed the expression of typical osteocyte markers like osteocalcin, E11/podoplanin and dentin matrix protein 1 (DMP-1).

Three-Dimensional Co-culture of Primary Human Osteocytes and Mature Human Osteoclasts in Collagen Gels

Osteoclasts are pivotal cells for bone remodeling and their activity is coordinated by osteocytes that reside inside the bone matrix. In vitro co-cultures of osteocytes and osteoclasts are therefore advantageous to analyze the crosstalk between these cell species. In this study, primary osteocytes were isolated from human bone in a multistep isolation process and embedded into three-dimensional collagen gels. Mature human osteoclasts were generated by differentiation of human peripheral blood mononuclear cells (PBMCs). Different surfaces were tested for osteoclast formation: suspension dishes, collagen gels, and normal tissue culture polystyrene. After detachment from the surfaces, osteoclasts showed typical morphology and gene expression of osteoclast markers. Osteoclasts that were differentiated on collagen exhibited the highest osteoclast marker expression. Cocultivation of mature osteoclasts with osteocytes was performed in a transwell system, with osteocytes, embedded in collagen gels at the apical side and osteoclasts on the basal side of a porous polyethylen terephtalate membrane, which allowed the separate gene expression analysis for osteocytes and osteoclasts. After 7 days of co-culture both cell species showed their typical morphology, which is multinucleated giant cells for osteoclasts and star-shaped cells with dendritic extensions for osteocytes. Furthermore, osteoclast markers tartrate-resistant acid phosphatase, carbonic anhydrase II, and cathepsin K were detected both on gene expression and protein level in single and co-cultures. Osteocytes showed gene expression of typical osteocyte markers E11, sclerostin, dentin matrix protein 1, osteocalcin, and receptor activator of nuclear factor-κ ligand both in single and co-culture. Impact statement This study is the first to establish an in vitro bone model that contains both primary human osteocytes and primary human osteoclasts. Previous studies applied rodent osteocyte cell lines to examine the influence of osteocytes on osteoclast function. This model mimics the clinical situation better since osteocytes are postmitotic cells whose function might be different in primary state compared with a proliferating cell line. Furthermore, the co-culture model can be the basis for in vitro triple culture models involving osteoblasts as the third bone cell species.

Lithium-Doped Biological-Derived Hydroxyapatite Coatings Sustain In Vitro Differentiation of Human Primary Mesenchymal Stem Cells to Osteoblasts

This study is focused on the adhesion and differentiation of the human primary mesenchymal stem cells (hMSC) to osteoblasts lineage on biological-derived hydroxyapatite (BHA) and lithium-doped BHA (BHA:LiP) coatings synthesized by Pulsed Laser Deposition. An optimum adhesion of the cells on the surface of BHA:LiP coatings compared to control (uncoated Ti) was demonstrated using immunofluorescence labelling of actin and vinculin, two proteins involved in the initiation of the cell adhesion process. BHA:LiP coatings were also found to favor the differentiation of the hMSC towards an osteoblastic phenotype in the presence of osteoinductive medium, as revealed by the evaluation of osteoblast-specific markers, osteocalcin and alkaline phosphatase. Numerous nodules of mineralization secreted from osteoblast cells grown on the surface of BHA:LiP coatings and a 3D network-like organization of cells interconnected into the extracellular matrix were evidenced. These findings highlight the good biocompatibility of the BHA coatings and demonstrate that the use of lithium as a doping agent results in an enhanced osteointegration potential of the synthesized biomaterials, which might therefore represent viable candidates for future in vivo applications.

Studies on Osteocytes in Their 3D Native Matrix Versus 2D In Vitro Models

PURPOSE OF REVIEW

Osteocytes are responsible for mechanosensing and mechanotransduction in bone and play a crucial role in bone homeostasis. They are embedded in a calcified collagenous matrix and connected with each other through the lacuno-canalicular network. Due to this specific native environment, it is a challenge to isolate primary osteocytes without losing their specific characteristics in vitro. This review summarizes the commonly used and recently established models to study the function of osteocytes in vitro.

RECENT FINDINGS

Osteocytes are mostly studied in monolayer culture, but recently, 3D models of osteocyte-like cells and primary osteocytes in vitro have been established as well. These models mimic the native environment of osteocytes and show superior osteocyte morphology and behavior, enabling the development of human disease models. Osteocyte-like cell lines as well as primary osteocytes isolated from bone are widely used to study the role of osteocytes in bone homeostasis. Both cells lines and primary cells are cultured in 2D-monolayer and 3D-models. The use of these models and their advantages and shortcomings are discussed in this review.

Investigating Osteocytic Perilacunar/Canalicular Remodeling

PURPOSE OF REVIEW

In perilacunar/canalicular remodeling (PLR), osteocytes dynamically resorb, and then replace, the organic and mineral components of the pericellular extracellular matrix. Given the enormous surface area of the osteocyte lacuna-canalicular network (LCN), PLR is important for maintaining homeostasis of the skeleton. The goal of this review is to examine the motivations and critical considerations for the analysis of PLR, in both in vitro and in vivo systems.

RECENT FINDINGS

Morphological approaches alone are insufficient to elucidate the complex mechanisms regulating PLR in the healthy skeleton and in disease. Understanding the role and regulation of PLR will require the incorporation of standardized PLR outcomes as a routine part of skeletal phenotyping, as well as the development of improved molecular and cellular outcomes. Current PLR outcomes assess PLR enzyme expression, the LCN, and bone matrix composition and organization, among others. Here, we discuss current PLR outcomes and how they have been applied to study PLR induction and suppression in vitro and in vivo. Given the role of PLR in skeletal health and disease, integrated analysis of PLR has potential to elucidate new mechanisms by which osteocytes participate in skeletal health and disease.

The Application of Microfluidic Techniques on Tissue Engineering in Orthopaedics

Background:

Tissue engineering (TE) is a promising solution for orthopaedic diseases such as bone or cartilage defects and bone metastasis. Cell culture in vitro and scaffold fabrication are two main parts of TE, but these two methods both have their own limitations. The static cell culture medium is unable to achieve multiple cell incubation or offer an optimal microenvironment for cells, while regularly arranged structures are unavailable in traditional cell-laden scaffolds, which results in low biocompatibility. To solve these problems, microfluidic techniques are combined with TE. By providing 3-D networks and interstitial fluid flows, microfluidic platforms manage to maintain phenotype and viability of osteocytic or chondrocytic cells, and the precise manipulation of liquid, gel and air flows in microfluidic devices leads to the highly organized construction of scaffolds.

Methods:

In this review, we focus on the recent advances of microfluidic techniques applied in the field of tissue engineering, especially in orthropaedics. An extensive literature search was done using PubMed. The introduction describes the properties of microfluidics and how it exploits the advantages to the full in the aspects of TE. Then we discuss the application of microfluidics on the cultivation of osteocytic cells and chondrocytes, and other extended researches carried out on this platform. The following section focuses on the fabrication of highly organized scaffolds and other biomaterials produced by microfluidic devices. Finally, the incubation and studying of bone metastasis models in microfluidic platforms are discussed.

Conclusion:

The combination of microfluidics and tissue engineering shows great potentials in the osteocytic cell culture and scaffold fabrication. Though there are several problems that still require further exploration, the future of microfluidics in TE is promising.

Novel actions of sclerostin on bone

The discovery that two rare autosomal recessive high bone mass conditions were caused by the loss of sclerostin expression prompted studies into its role in bone homeostasis. In this article, we aim to bring together the wealth of information relating to sclerostin in bone though discussion of rare human disorders in which sclerostin is reduced or absent, sclerostin manipulation via genetic approaches and treatment with antibodies that neutralise sclerostin in animal models and in human. Together, these findings demonstrate the importance of sclerostin as a regulator of bone homeostasis and provide valuable insights into its biological mechanism of action. We summarise the current state of knowledge in the field, including the current understanding of the direct effects of sclerostin on the canonical WNT signalling pathway and the actions of sclerostin as an inhibitor of bone formation. We review the effects of sclerostin, and its inhibition, on bone at the cellular and tissue level and discuss new findings that suggest that sclerostin may also regulate adipose tissue. Finally, we highlight areas in which future research is expected to yield additional insights into the biology of sclerostin.

Human ex vivo 3D bone model recapitulates osteocyte response to metastatic prostate cancer

Prostate cancer (PCa) is the second leading cause of cancer deaths among American men. Unfortunately, there is no cure once the tumor is established within the bone niche. Although osteocytes are master regulators of bone homeostasis and remodeling, their role in supporting PCa metastases remains poorly defined. This is largely due to a lack of suitable ex vivo models capable of recapitulating the physiological behavior of primary osteocytes. To address this need, we integrated an engineered bone tissue model formed by 3D-networked primary human osteocytes, with conditionally reprogrammed (CR) primary human PCa cells. CR PCa cells induced a significant increase in the expression of fibroblast growth factor 23 (FGF23) by osteocytes. The expression of the Wnt inhibitors sclerostin and dickkopf-1 (Dkk-1), exhibited contrasting trends, where sclerostin decreased while Dkk-1 increased. Furthermore, alkaline phosphatase (ALP) was induced with a concomitant increase in mineralization, consistent with the predominantly osteoblastic PCa-bone metastasis niche seen in patients. Lastly, we confirmed that traditional 2D culture failed to reproduce these key responses, making the use of our ex vivo engineered human 3D bone tissue an ideal platform for modeling PCa-bone interactions.

Ex vivo replication of phenotypic functions of osteocytes through biomimetic 3D bone tissue construction

Osteocytes, residing as 3-dimensionally (3D) networked cells in bone, are well known to regulate bone and mineral homeostasis and have been recently implicated to interact with cancer cells to influence the progression of bone metastases. In this study, a bone tissue consisting of 3D-networked primary human osteocytes and MLO-A5 cells was constructed using: (1) the biomimetic close-packed assembly of 20-25μm microbeads with primary cells isolated from human bone samples and MLO-A5 cells and (2) subsequent perfusion culture in a microfluidic device. With this 3D tissue construction approach, we replicated ex vivo, for the first time, the mechanotransduction function of human primary osteocytes and MLO-A5 cells by correlating the effects of cyclic compression on down-regulated SOST and DKK1 expressions. Also, as an example of using our ex vivo model to evaluate therapeutic agents, we confirmed previously reported findings that parathyroid hormone (PTH) decreases SOST and increases the ratio of RANKL and OPG. In comparison to other in vitro models, our ex vivo model: (1) replicates the cell density, phenotype, and functions of primary human osteocytes and MLO-A5 cells and (2) thus provides a clinically relevant means of studying bone diseases and metastases.

Hypoxic Three-Dimensional Cellular Network Construction Replicates Ex Vivo the Phenotype of Primary Human Osteocytes

Osteocytes are deeply embedded in the mineralized matrix of bone and are nonproliferative, making them a challenge to isolate and maintain using traditional in vitro culture methods without sacrificing their inimitable phenotype. We studied the synergistic effects of two microenvironmental factors that are vital in retaining, ex vivo, the phenotype of primary human osteocytes: hypoxia and three-dimensional (3D) cellular network. To recapitulate the lacunocanalicular structure of bone tissue, we assembled and cultured primary human osteocytic cells with biphasic calcium phosphate microbeads in a microfluidic perfusion culture device. The 3D cellular network was constructed by the following: (1) the inhibited proliferation of cells entrapped by microbeads, biomimetically resembling lacunae, and (2) the connection of neighboring cells by dendrites through the mineralized, canaliculi-like interstitial spaces between the microbeads. We found that hypoxia synergistically and remarkably upregulated the mature osteocytic gene expressions of the 3D-networked cells, SOST (encoding sclerostin) and FGF23 (encoding fibroblast growth factor 23), by several orders of magnitude in comparison to those observed from two-dimensional and normoxic culture controls. Intriguingly, hypoxia facilitated the self-assembly of a nonproliferating, osteoblastic monolayer on the surface of the 3D-networked cells, replicating the osteoblastic endosteal cell layer found at the interface between native bone and bone marrow tissues. Our ability to replicate, with hypoxia, the strong expressions of these mature osteocytic markers, SOST and FGF23, is important since these (1) could not be significantly produced in vitro and (2) are new important targets for treating bone diseases. Our findings are therefore expected to facilitate ex vivo studies of human bone diseases using primary human bone cells and enable high-throughput evaluation of potential bone-targeting therapies with clinical relevance.