Nanocomposite scaffolds of bioactive glass ceramic nanoparticles disseminated chitosan matrix for tissue engineering applications

Chitosan/NH2-MIL-125 (Ti) scaffold loaded with doxorubicin for postoperative bone tumor clearance and osteogenesis: An in vitro study

Surgical resection remains the primary treatment modality for bone tumors. However, it is prone to local bone defects and tumor recurrence. Therefore, there is an urgent need for multifunctional biomaterials that combine tumor treatment and bone repair after bone tumor surgery. Herein, a chitosan composite scaffold (CS/DOX@Ti-MOF) was designed for both tumor therapy and bone repair. Among them, the amino-functionalized Ti-based metal-organic framework (NH2-MIL-125 (Ti), Ti-MOF) has a high specific surface area of 1116 m2/g and excellent biocompatibility, and promotes osteogenic differentiation. The doxorubicin (DOX) loading capacity of Ti-MOF was 322 ± 21 mg/g, and DOX@Ti-MOF has perfect antitumor activity. Furthermore, the incorporation of DOX@Ti-MOF improved the physical and mechanical properties of the composite scaffolds, making the scaffold surface rough and favorable for cells to attach. CS/DOX@Ti-MOF retains the unique properties of each component. It responds to the release of DOX in the tumor microenvironment to remove residual tumor cells, followed by providing a site for cell attachment, proliferation, and differentiation. This promotes bone repair and achieves the sequential treatment of postoperative bone tumors. Overall, CS/DOX@Ti-MOF may be a promising substitute for postoperative bone tumor clearance and bone defect repair. It also provides a possible strategy for postoperative bone tumor treatment.

Chitosan scaffolds with mesoporous hydroxyapatite and mesoporous bioactive glass

Bone regeneration is one of the most well-known fields in tissue regeneration. The major focus concerns polymeric/ceramic composite scaffolds. In this work, several composite scaffolds based on chitosan (CH), with low and high molecular weights, and different concentrations of ceramics like mesoporous bioactive glass (MBG), mesoporous hydroxyapatite (MHAp) and both MBG and MHAp (MC) were produced by lyophilization. The purpose is to identify the best combination regarding optimal morphology and properties. The tests of the scaffolds present a highly porous structure with interconnected pores. The compression modulus increases with ceramic concentration in the scaffolds. Furthermore, the 75%MBG (835 ± 160 kPa) and 50%MC (1070 ± 205 kPa) samples are the ones that mostly enhance increases in mechanical properties. The swelling capacity increases with MBG and MC, respectively, to 700% and 900% and decreases to 400% when MHAp concentration increases. All scaffolds are non-cytotoxic at 12.5 mg/mL. The CHL scaffolds improve cell adhesion and proliferation compared to CHH, and the MC scaffold samples, show better results than those produced with just MBG or MHAp. The composite scaffolds of chitosan with MBG and MHAp, have revealed to be the best combination due to their enhanced performance in bone tissue engineering.

Water Saturated with Pressurized CO2 as a Tool to Create Various 3D Morphologies of Composites Based on Chitosan and Copper Nanoparticles

Methods for creating various 3D morphologies of composites based on chitosan and copper nanoparticles stabilized by it in carbonic acid solutions formed under high pressure of saturating CO2 were developed. This work includes a comprehensive analysis of the regularities of copper nanoparticles stabilization and reduction with chitosan, studied by IR and UV-vis spectroscopies, XPS, TEM and rheology. Chitosan can partially reduce Cu2+ ions in aqueous solutions to small-sized, spherical copper nanoparticles with a low degree of polydispersity; the process is accompanied by the formation of an elastic polymer hydrogel. The resulting composites demonstrate antimicrobial activity against both fungi and bacteria. Exposing the hydrogels to the mixture of He or H2 gases and CO2 fluid under high pressure makes it possible to increase the porosity of hydrogels significantly, as well as decrease their pore size. Composite capsules show sufficient resistance to various conditions and reusable catalytic activity in the reduction of nitrobenzene to aniline reaction. The relative simplicity of the proposed method and at the same time its profound advantages (such as environmental friendliness, extra purity) indicate an interesting role of this study for various applications of materials based on chitosan and metals.

Manufacturing of Zinc Oxide Nanoparticle (ZnO NP)-Loaded Polyvinyl Alcohol (PVA) Nanostructured Mats Using Ginger Extract for Tissue Engineering Applications

In this research, as an alternative to chemical and physical methods, environmentally and cost-effective antimicrobial zinc oxide nanoparticles (ZnO NP) were produced by the green synthesis method. The current study focuses on the production of ZnO NP starting from adequate precursor and Zingiber officinale aqueous root extracts (ginger). The produced ZnO NP was loaded into electrospun nanofibers at different concentrations for various tissue engineering applications such as wound dressings. The produced ZnO NPs and ZnO NP-loaded nanofibers were examined by Scanning Electron Microscopy (SEM) for morphological assessments and Fourier-transform infrared spectrum (FT-IR) for chemical assessments. The disc diffusion method was used to test the antimicrobial activity of ZnO NP and ZnO NP-loaded nanofibers against three representatives strains, Escherichia coli (Gram-negative bacteria), Staphylococcus aureus (Gram-positive bacteria), and Candida albicans (fungi) microorganisms. The strength and stretching of the produced fibers were assessed using tensile tests. Since water absorption and weight loss behaviors are very important in tissue engineering applications, swelling and degradation analyses were applied to the produced nanofibers. Finally, the MTT test was applied to analyze biocompatibility. According to the findings, ZnO NP-loaded nanofibers were successfully synthesized using a green precipitation approach and can be employed in tissue engineering applications such as wound dressing.

Bioactivity of star-shaped polycaprolactone/chitosan composite hydrogels for biomaterials

Recently, our group reported the synthesis and fabrication of composite hydrogels of chitosan (CS) and star-shaped polycaprolactone (stPCL). The co-crosslink of modified stPCL with carboxyl at the end chain (stPCL-COOH) provided good mechanical properties and stability to the composite hydrogels. This research presents the bioactivities of composite hydrogels showing a potential candidate to develop biomaterials such as wound dressing and bone tissue engineering. The bioactivities were the antibacterial activity, cell viability, skin irritation, decomposability, and ability to attach ions for apatite nucleation. The results showed that all the composite hydrogels were completely decomposed within 2 days. The composite hydrogels had better antibacterial activity and higher efficiency to Gram-negative (Escherichia coli) than to Gram-positive (Staphylococcus epidermidis) bacteria. The composite hydrogels were studied for cell viability based on MTT assay and skin irritation on rabbit skin. The results indicated high cell survival more than 80% and no skin irritation. In addition, the results showed that calcium and phosphorous were preferentially attached to the composite hydrogel surface to grow apatite crystal (Ca/P ratio 1.86) compared to attaching to the chitosan hydrogel (Ca/P ratio 1.48) in 21 days of testing.

Biological and bioactivity assessment of dextran nanocomposite hydrogel for bone regeneration

Insufficient biological and bioactive properties of dextran hydrogels limit their applications as promising scaffolds for tissue engineering. We developed nanocomposite dextran hydrogels comprised of bioactive glass (nBGC: 64% SiO2, 31% CaO, 5% P₂O₅) nanoparticles with an average particle size of 77 nm using a chemical crosslinking of dextran chains to form 3D hydrogel networks. In the current study; bioactivity of the obtained nanocomposite hydrogels was evaluated through the formation of apatite crystal structures after the incubation in simulated body fluid (SBF) at various submersion periods and nBGC content. The scanning electron microscopy (SEM) micrographs represented an enhanced hydroxyapatite formation on the cross section of nanocomposite comprising of nBGC content from 2 to 8 (% by wt). Biomineralization results of Dex-8 (% by wt) composite during 7, 14 and 28 days immersion indicated the apatite layer formation and the growth of apatite crystal size on the surface and cross section of the nanocomposite. Moreover, MTT assessments indicated that human osteosarcoma cells (SaOS-2) were able to adhere and spread within the dextran hydrogels reinforced with the bioactive glass nanoparticles. With regard to enhanced bioactivity and biocompatibility, the developed dextran-nBGC hydrogel could be considered as a suitable candidate for bone tissue engineering application.

Novel chitosan and bacterial cellulose biocomposites tailored with polymeric nanoparticles for modern wound dressing development

Dressing biomaterials play a key role in wound management keeping a moisture medium and protecting against external factors. Natural and synthetic materials could be used as dressings where chitosan and bacterial cellulose is one of the most important solutions. These biopolymers have been used for wound dressing based on their non-toxic, biodegradable, and biocompatible features. In this study, biocomposites based on bacterial cellulose and chitosan membranes tailored with antimicrobial loaded poly(N-isopropylacrylamide)/polyvinyl alcohol nanoparticles were prepared. Core-shell polymeric nanoparticles, bacterial cellulose/chitosan membranes, and biocomposites were independently loaded with silver sulfadiazine, a well-known sulfonamide antibacterial agent used in the therapy of mild-to-moderate infections for sensitive organisms. The chemistry, structure, morphology, and size distribution were investigated by Fourier transformed infrared spectroscopy (FTIR-ATR), RAMAN spectroscopy, Scanning electron (SEM) and Transmission electron microscopy (TEM), and Dynamic light scattering (DLS). In vitro release behaviors of silver sulfadiazine from polymeric nanoparticles and biocomposites were investigated. The biological investigations revealed good biocompatibility of both the nanoparticles and the biocomposites in terms of human dermal fibroblasts viability and proliferation potential. Finally, the drug-loaded polymeric biomaterials showed promising characteristics, proving their high potential as an alternative support to develop a biocompatible and antibacterial wound dressing.

Prevention the formation of biofilm on orthopedic implants by melittin thin layer on chitosan/bioactive glass/vancomycin coatings

Methicillin-resistant and Vancomycin-resistant Staphylococcus aureus bacteria (MRSA and VRSA, respectively) can seriously jeopardizes bone implants. This research aimed to examine the potential synergistic effects of Melittin and vancomycin in preventing MRSA and VRSA associated bone implant infections. Chitosan/bioactive glass nanoparticles/vancomycin composites were coated on hydrothermally etched titanium substrates by casting method. The composite coatings were coated by Melittin through drop casting technique. Melittin raised the proliferation of MC3T3 cells, making it an appropriate option as osteoinductive and antibacterial substance in coatings of orthopedic implants. Composite coatings having combined vancomycin and Melittin eliminated both planktonic and adherent MRSA and VRSA bacteria, whereas coatings containing one of them failed to kill the whole VRSA bacteria. Therefore, chitosan/bioactive glass/vancomycin/Melittin coating can be used as a bone implant coating because of its anti-infective properties.

Degradation Behavior of Polymers Used as Coating Materials for Drug Delivery-A Basic Review

The purpose of the work was to emphasize the main differences and similarities in the degradation mechanisms in the case of polymeric coatings compared with the bulk ones. Combined with the current background, this work reviews the properties of commonly utilized degradable polymers in drug delivery, the factors affecting degradation mechanism, testing methods while offering a retrospective on the evolution of the controlled release of biodegradable polymeric coatings. A literature survey on stability and degradation of different polymeric coatings, which were thoroughly evaluated by different techniques, e.g., polymer mass loss measurements, surface, structural and chemical analysis, was completed. Moreover, we analyzed some shortcomings of the degradation behavior of biopolymers in form of coatings and briefly proposed some solving directions to the main existing problems (e.g., improving measuring techniques resolution, elucidation of complete mathematical analysis of the different degradation mechanisms). Deep studies are still necessary on the dynamic changes which occur to biodegradable polymeric coatings which can help to envisage the future performance of synthesized films designed to be used as medical devices with application in drug delivery.

In Vitro and In Vivo Evaluation of Carboxymethyl Cellulose Scaffolds for Bone Tissue Engineering Applications

The present study involves the development of citric acid-cross-linked carboxymethyl cellulose (C3CA) scaffolds by a freeze-drying process. Scaffolds were fabricated at different freezing temperatures of -20, -40, or -80 °C to investigate the influence of scaffold pore size on bone regeneration. All three scaffolds were porous in structure, and the pore size was measured to be 74 ± 4, 55 ± 6, and 46 ± 5 μm for -20, -40, and -80 °C scaffolds. The pores were larger in scaffolds processed at -20 °C compared to -40 and -80 °C, indicating the reduction in pore size of the scaffolds with a decrease in freezing temperature. The cytocompatibility, cell proliferation, and differentiation in C3CA scaffolds were assessed with the Saos-2 osteoblast cell line. These scaffolds supported the proliferation and differentiation of Saos-2 cells with significant matrix mineralization in scaffolds processed at -40 °C. Subcutaneous implantation of C3CA scaffolds in the rat model was investigated for its ability of vascularization and new matrix tissue formation. The matrix formation was observed at the earliest of 14 days in the scaffolds when processed at -40 °C while it was observed only after 28 days of implantation with the scaffolds processed at -20 and -80 °C. These results suggest that the citric acid-cross-linked CMC scaffolds processed at -40 °C can be promising for bone tissue engineering application.

Enhancing Mechanical Properties and Biological Performances of Injectable Bioactive Glass by Gelatin and Chitosan for Bone Small Defect Repair

Bioactive glass (BG) represents a promising biomaterial for bone healing; here injectable BG pastes biological properties were improved by the addition of gelatin or chitosan, as well as mechanical resistance was enhanced by adding 10 or 20 wt% 3-Glycidyloxypropyl trimethoxysilane (GPTMS) cross-linker. Composite pastes exhibited bioactivity as apatite formation was observed by Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) after 14 days immersion in simulated body fluid (SBF); moreover, polymers did not enhance degradability as weight loss was >10% after 30 days in physiological conditions. BG-gelatin-20 wt% GPTMS composites demonstrated the highest compressive strength (4.8 ± 0.5 MPa) in comparison with the bulk control paste made of 100% BG in water (1.9 ± 0.1 MPa). Cytocompatibility was demonstrated towards human mesenchymal stem cells (hMSC), osteoblasts progenitors, and endothelial cells. The presence of 20 wt% GPTMS conferred antibacterial properties thus inhibiting the joint pathogens Staphylococcus aureus and Staphylococcus epidermidis infection. Finally, hMSC osteogenesis was successfully supported in a 3D model as demonstrated by alkaline phosphatase release and osteogenic genes expression.

A Review of Bioactive Glass/Natural Polymer Composites: State of the Art

Collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose are biocompatible and non-cytotoxic, being attractive natural polymers for medical devices for both soft and hard tissues. However, such natural polymers have low bioactivity and poor mechanical properties, which limit their applications. To tackle these drawbacks, collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose can be combined with bioactive glass (BG) nanoparticles and microparticles to produce composites. The incorporation of BGs improves the mechanical properties of the final system as well as its bioactivity and regenerative potential. Indeed, several studies have demonstrated that polymer/BG composites may improve angiogenesis, neo-vascularization, cells adhesion, and proliferation. This review presents the state of the art and future perspectives of collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose matrices combined with BG particles to develop composites such as scaffolds, injectable fillers, membranes, hydrogels, and coatings. Emphasis is devoted to the biological potentialities of these hybrid systems, which look rather promising toward a wide spectrum of applications.

Formulation and Evaluation of Microwave-Modified Chitosan-Curcumin Nanoparticles-A Promising Nanomaterials Platform for Skin Tissue Regeneration Applications Following Burn Wounds

Improved physicochemical properties of chitosan-curcumin nanoparticulate carriers using microwave technology for skin burn wound application are reported. The microwave modified low molecular weight chitosan variant was used for nanoparticle formulation by ionic gelation method nanoparticles analyzed for their physicochemical properties. The antimicrobial activity against Staphylococcus aureus and Pseudomonas aeruginosa cultures, cytotoxicity and cell migration using human dermal fibroblasts-an adult cell line-were studied. The microwave modified chitosan variant had significantly reduced molecular weight, increased degree of deacetylation and decreased specific viscosity. The nanoparticles were nano-sized with high positive charge and good dispersibility with entrapment efficiency and drug content in between 99% and 100%, demonstrating almost no drug loss. Drug release was found to be sustained following Fickian the diffusion mechanism for drug release with higher cumulative drug release observed for formulation (F)2. The microwave treatment does not render a destructive effect on the chitosan molecule with the drug embedded in the core of nanoparticles. The optimized formulation precluded selected bacterial strain colonization, exerted no cytotoxic effect, and promoted cell migration within 24 h post application in comparison to blank and/or control application. Microwave modified low molecular weight chitosan-curcumin nanoparticles hold potential in delivery of curcumin into the skin to effectively treat skin manifestations.

An in vitro evaluation of zinc silicate fortified chitosan scaffolds for bone tissue engineering

Tissue engineering aims at replacement, repair, and regeneration of tissues by a combination of scaffolds, growth factors, and cells. In this study, we report the synthesis of biodegradable composite scaffolds fortified with mesoporous zinc silicate (mZS) and assessment of in vitro properties for bone tissue engineering (BTE) applications. The scaffolds consisted of chitosan (CS) incorporated with mZS at 0.1, 0.2, 0.3, and 0.5 wt%. The bio-composite scaffolds were visualized using Field Emission Scanning Electron Microscopy (FE-SEM). The incorporation of mZS was confirmed using Energy dispersive x-ray (EDS) analysis. Biomineralization studies were conducted in simulated body fluid (SBF) and indicated bioactivity of fabricated scaffolds. The scaffolds also displayed antibacterial action against Staphylococcus aureus. Cellular attachment within the scaffold network established biocompatibility of the material. Incorporation of mZS within the chitosan scaffolds matrix improved properties such as porosity, degradation rate, and biomineralization. Therefore, fabricated scaffolds exhibit exceptional features and have the potential to serve as an implant for BTE applications.

Novel electrospun polyurethane scaffolds containing bioactive glass nanoparticles

In the present study, polyurethane (PU) nanocomposite scaffolds containing bioactive glass nanoparticles (BG-NPs) were successfully fabricated through the electrospinning process. The BG-NPs were synthesized through the sol–gel method. PU solutions (10% w/v) containing different weight percentages of the BG-NPs (5, 10 and 15 wt.%) in dimethylformamide/tetrahydrofuran were prepared. To determine both the size of BG-NPs and the diameter of the nanofibers, transmission electron microscopy and scanning electron microscopy were carried out. The surface morphology, mechanical properties, bioactivity and degradation rate of the scaffolds were studied. Fourier transform infrared spectroscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy confirmed the presence of BG within the scaffolds. The tensile strength of nanocomposite scaffolds was in the range 5–8 MPa, which is in good agreement with the tensile strength of cancellous bone tissue. MG63 cells attached to and proliferated well within the scaffolds; therefore, cellular growth was also improved in the nanocomposite scaffolds. Based on the results, the novel PU/BG-NP (10 wt.%) nanocomposite scaffold has a great potential to be applied in cancellous bone tissue engineering.

Synthesis and characterization of osteoinductive visible light-activated adhesive composites with antimicrobial properties

Orthopedic surgical procedures based on the use of conventional biological graft tissues are often associated with serious post-operative complications such as immune rejection, bacterial infection, and poor osseointegration. Bioresorbable bone graft substitutes have emerged as attractive alternatives to conventional strategies because they can mimic the composition and mechanical properties of the native bone. Among these, bioactive glasses (BGs) hold great potential to be used as biomaterials for bone tissue engineering owing to their biomimetic composition and high biocompatibility and osteoinductivity. Here, we report the development of a novel composite biomaterial for bone tissue engineering based on the incorporation of a modified strontium- and lithium-doped 58S BG (i.e., BG-5/5) into gelatin methacryloyl (GelMA) hydrogels. We characterized the physicochemical properties of the BG formulation via different analytical techniques. Composite hydrogels were then prepared by directly adding BG-5/5 to the GelMA hydrogel precursor, followed by photocrosslinking of the polymeric network via visible light. We characterized the physical, mechanical, and adhesive properties of GelMA/BG-5/5 composites, as well as their in vitro cytocompatibility and osteoinductivity. In addition, we evaluated the antimicrobial properties of these composites in vitro, using a strain of methicillin-resistant Staphylococcus Aureus. GelMA/BG-5/5 composites combined the functional characteristics of the inorganic BG component, with the biocompatibility, biodegradability, and biomimetic composition of the hydrogel network. This novel biomaterial could be used for developing osteoinductive scaffolds or implant surface coatings with intrinsic antimicrobial properties and higher therapeutic efficacy.

Effect of Melt-Derived Bioactive Glass Particles on the Properties of Chitosan Scaffolds

This study reports on the processing of three-dimensional (3D) chitosan/bioactive glass composite scaffolds. On the one hand, chitosan, as a natural polymer, has suitable properties for tissue engineering applications but lacks bioactivity. On the other hand, bioactive glasses are known to be bioactive and to promote a higher level of bone formation than any other biomaterial type. However, bioactive glasses are hard, brittle, and cannot be shaped easily. Therefore, in the past years, researchers have focused on the processing of new composites. Difficulties in reaching composite materials made of polymer (synthetic or natural) and bioactive glass include: (i) The high glass density, often resulting in glass segregation, and (ii) the fast bioactive glass reaction when exposed to moisture, leading to changes in the glass reactivity and/or change in the polymeric matrix. Samples were prepared with 5, 15, and 30 wt% of bioactive glass S53P4 (BonAlive ®), as confirmed using thermogravimetric analysis. MicrO-Computed tomography and optical microscopy revealed a flaky structure with porosity over 80%. The pore size decreased when increasing the glass content up to 15 wt%, but increased back when the glass content was 30 wt%. Similarly, the mechanical properties (in compression) of the scaffolds increased for glass content up to 15%, but decreased at higher loading. Ions released from the scaffolds were found to lead to precipitation of a calcium phosphate reactive layer at the scaffold surface. This is a first indication of the potential bioactivity of these materials. Overall, chitosan/bioactive glass composite scaffolds were successfully produced with pore size, machinability, and ability to promote a calcium phosphate layer, showing promise for bone tissue engineering and the mechanical properties can justify their use in non-load bearing applications.

Green synthesis of bacterial cellulose/bioactive glass nanocomposites: Effect of glass nanoparticles on cellulose yield, biocompatibility and antimicrobial activity

Despite the advantages of bacterial cellulose (BC) over traditional cellulose, its low yield and little bioactivity makes a limitation to be used in an industrial scale. This paper was mainly dual aimed to increase the BC yield using a nanobioactive glass (NBG), and in situ synthesize BC/NBG bioactive nanocomposites by a novel and simple green method. Accordingly, the composites were prepared via in situ fermentation approach by incorporation of NBG particles into BC producing culture medium. The effect of NBG addition on the production process of cellulose, biocompatibility, bioactivity and antimicrobial activity were investigated. The results showed that NBG was enhanced and increased the BC yield and this has been achieved by maintaining these NBG on the pH value of the culture medium during the fermentation period. Moreover, it was effectively improved biocompatibility and antimicrobial properties of BC. This study evidenced that BC/NBG composite can be expected to be widely applied in biomedical industries such as bone regeneration and wound healing with the unique of being not harmful to humans.

Advance of Nano-Composite Electrospun Fibers in Periodontal Regeneration

Periodontitis is considered to be the main cause of tooth loss, which affects about 15% of the adult population around the world. Scaling and root-planning are the conventional treatments utilized to remove the contaminated tissue and bacteria, but eventually lead to the formation of a poor connection—long junctional epithelium. Therefore, regenerative therapies, such as guided tissue/bone regeneration (GTR/GBR) for periodontal regeneration have been attempted. GTR membranes, acting as scaffolds, create three-dimensional (3D) environment for the guiding of cell attachment, proliferation and differentiation, and play a significant role in periodontal regeneration. Nano-composite scaffolds based on electrospun nanofibers have gained great attention due to their ability to emulate natural extracellular matrix (ECM) that affects cell survival, attachment and reorganization. Promoted protein absorption, cellular reactions, activation of specific gene expression and intracellular signaling, and high surface area to volume ratio are also important properties of nanofibrous scaffolds. Moreover, several bioactive components, such as bioceramics and functional polymers can be easily blended into nanofibrous matrixes to regulate the physical-chemical-biological properties and regeneration abilities. Simultaneously, functional growth factors, proteins and drugs are also incorporated to regulate cellular reactions and even modify the local inflammatory microenvironment, which benefit periodontal regeneration and functional restoration. Herein, the progress of nano-composite electrospun fibers for periodontal regeneration is reviewed, including fabrication methods, compound types and processes, and surface modifications, etc. Significant proof-of-concept examples are utilized to illustrate the results of material characteristics, cellular interactions and periodontal regenerations. Finally, the existing limitations of nano-composite electrospun fibers and the development tendencies in future are also discussed.

Chemical composition, structural features, surface morphology and bioactivities of chitosan derivatives from lobster (Thenus unimaculatus) shells

The chemical composition, structural features and bioactivities of chitosan derivatives were studied and reported here. Chitin and chitosan was extracted by chemical methods and yield was recorded 35% and 41%, moisture and ash has showed 7.4, 0.73, 1.2 and 0.79% and Ca was recorded high level (590 ppm). The IR spectrum has showed NH primary and secondary amines, OH group and several sugar stretching. N-acetyl glucosamine (GlcNAc), H-2 proton of glucosamine (GlcN), Anomeric protons, H-1 [GlcN (H-1D), GlcNAc (H-1A)] were noticed in ¹H NMR and anomeric, methyl carbon atoms in ¹³C NMR. Rough surface, irregular block, crystalline with cluster and porosity structure was noticed by SEM observation. Antioxidant effect has showed good and concentration depended in four antioxidant assays. The α-amylase and β-glucosidase enzyme inhibition effect of chitosan has showed promising and dose depend also anticoagulant potential. Chitosan could be used in pharmaceutical industry and tissue engineering.

In vitro performance of a nanobiocomposite scaffold containing boron-modified bioactive glass nanoparticles for dentin regeneration

Every year, many dental restoration methods are carried out in the world and most of them do not succeed. High cost of these restorations and rejection possibility of the implants are main drawbacks. For this reason, a regenerative approach for repairing the damaged dentin-pulp complex or generating a new tissue is needed. In this study, the potential of three-dimensional cellulose acetate/oxidized pullulan/gelatin-based dentin-like constructs containing 10 or 20% bioactive glass nanoparticles was studied to explore their potential for dentin regeneration. Three-dimensional nano biocomposite structures were prepared by freeze-drying/metal mold pressing methods and characterized by in vitro degradation analysis, water absorption capacity and porosity measurements, scanning electron microscopy, in vitro biomineralization analysis. During one-month incubation in phosphate buffered saline solution at 37°C, scaffolds lost about 25-30% of their weight and water absorption capacity gradually decreased with time. Scanning electron microscopy examinations showed that mean diameter of the tubular structures was about 420 µm and the distance between walls of the tubules was around 560 µm. Calcium phosphate precipitates were formed on scaffolds surfaces treated with simulated body fluid, which was enhanced by boron-modified bioactive glass addition. For cell culture studies human dental pulp stem cells were isolated from patient teeth. An improvement in cellular viability was observed for different groups over the incubation period with the highest human dental pulp stem cells viability on B7-20 scaffolds. ICP-OES analysis revealed that concentration of boron ion released from the scaffolds was between 0.2 and 1.1 mM, which was below toxic levels. Alkaline phosphatase activity and intracellular calcium amounts significantly increased 14 days after incubation with highest values in B14-10 group. Von Kossa staining revealed higher levels of mineral deposition in these groups. In this work, results indicated that developed dentin-like constructs are promising for dentin regeneration owing to presence of boron-modified bioactive glass nanoparticles.

Bioperformance of chitosan/fluoride-doped diopside nanocomposite coatings deposited on medical stainless steel

This work focuses on the structure, bioactivity, corrosion, and biocompatibility characteristics of chitosan-matrix composites reinforced with various amounts of fluoride-doped diopside nanoparticles (at 20, 40, 60, and 80 wt%) deposited on stainless steel 316 L. Bioactivity studies reveal that the presence of the nanoparticles in the coatings induces apatite-forming ability to the surfaces. Based on electrochemical impedance spectroscopy and polarization experiments, the in vitro corrosion resistance of the substrate was enhanced by increasing the level of the nanoparticles in the coating. The sample containing 60% of the nanoparticles presented the highest osteoblast-like MG63 cell viability, in comparison to the other prepared and even control samples. Also, the cell attachment on the surfaces was improved with increasing the amount of the nanoparticles in the coatings. It is eventually concluded that the application of chitosan/fluoride-doped diopside nanocomposite coatings improves the bioperformance of metallic implants.

Anticancer activity of silver and copper embedded chitin nanocomposites against human breast cancer (MCF-7) cells

Chitin is a natural biopolymer widely used in biomedical and environmental applications due to its distinctive physical, chemical and mechanical properties. Although the anticancer property of chitin nanoforms and chitin derivatives against various cancers were studied earlier, there is no report in the chitin nanostructure incorporated metal nanocomposite. The present study was aimed to investigate the cytotoxicity of chitin incorporated silver and copper nanocomposite against human breast cancer (MCF-7) cells. Cytotoxicity of chitin nanoparticles (CNP), silver nanoparticles (AgNP), copper nanoparticles (CuNP), chitin/silver nanocomposite (CNP/AgNP) and chitin/copper nanocomposite (CNP/CuNP) was evaluated. Among all the above, CNP/AgNP has shown a lower of 31 mg as inhibitory concentration (IC₅₀) value. Our study further showed the increased generation of reactive oxygen species with decreased activity of antioxidant enzymes and damage in the membrane integrity, thus confirms the cellular cytotoxic action of CNP/AgNP. In conclusion, the present study validates that, incorporating chitin nanoparticles with metallic nanostructure could be an effective and promising therapeutic agent against breast cancer.

Preparation and characterization of cockle shell aragonite nanocomposite porous 3D scaffolds for bone repair

The demands for applicable tissue-engineered scaffolds that can be used to repair load-bearing segmental bone defects (SBDs) is vital and in increasing demand. In this study, seven different combinations of 3 dimensional (3D) novel nanocomposite porous structured scaffolds were fabricated to rebuild SBDs using an extraordinary blend of cockle shells (CaCo₃) nanoparticles (CCN), gelatin, dextran and dextrin to structure an ideal bone scaffold with adequate degradation rate using the Freeze Drying Method (FDM) and labeled as 5211, 5400, 6211, 6300, 7101, 7200 and 8100. The micron sized cockle shells powder obtained (75 µm) was made into nanoparticles using mechano-chemical, top-down method of nanoparticles synthesis with the presence of the surfactant BS-12 (dodecyl dimethyl bataine). The phase purity and crystallographic structures, the chemical functionality and the thermal characterization of the scaffolds’ powder were recognized using X-Ray Diffractometer (XRD), Fourier transform infrared (FTIR) spectrophotometer and Differential Scanning Calorimetry (DSC) respectively. Characterizations of the scaffolds were assessed by Scanning Electron Microscopy (SEM), Degradation Manner, Water Absorption Test, Swelling Test, Mechanical Test and Porosity Test. Top-down method produced cockle shell nanoparticles having averagely range 37.8±3–55.2±9 nm in size, which were determined using Transmission Electron Microscope (TEM). A mainly aragonite form of calcium carbonate was identified in both XRD and FTIR for all scaffolds, while the melting (Tm) and transition (Tg) temperatures were identified using DSC with the range of Tm 62.4–75.5 °C and of Tg 230.6–232.5 °C. The newly prepared scaffolds were with the following characteristics: (i) good biocompatibility and biodegradability, (ii) appropriate surface chemistry and (iii) highly porous, with interconnected pore network. Engineering analyses showed that scaffold 5211 possessed 3D interconnected homogenous porous structure with a porosity of about 49%, pore sizes ranging from 8.97 to 337 µm, mechanical strength 20.3 MPa, Young's Modulus 271±63 MPa and enzymatic degradation rate 22.7 within 14 days.

•

An innovative mixture of nano-CaCo₃ (aragonite), gelatin, dextrin and dextran.

•

Scaffold 5211 reached a tipping point in terms of ideal morphology, optimal physiochemical properties, and great mechanical strength.

•

Scaffold 5211 may guarantee the achievement of the developed scaffold purposes in true biological system.

Nano-carbohydrates: Synthesis and application in genetics, biotechnology, and medicine

Combining nanoparticles with carbohydrate has triggered an exponential growth of research activities for the design of novel functional bionanomaterials, nano-carbohydrates. Recent advances in versatile synthesis of glycosylated nanoparticles have paved the way towards diverse biomedical applications. The accessibility of a wide variety of these structured nanosystems, in terms of shape, size, and organization around stable nanoparticles, has readily contributed to their development and application in nanomedicine. Glycosylated gold nanoparticles, glycosylated quantum dots, fullerenes, single-wall nanotubes, and self-assembled glyconanoparticles using amphiphilic glycopolymers or glycodendrimers have received considerable attention for their application in powerful imaging, therapeutic, and biodiagnostic devices. Recently, nano-carbohydrates were used for different types of microarrays to detect proteins and nucleic acids.

Biomedical applications of natural-based polymers combined with bioactive glass nanoparticles

The combination of natural polymers with nanoparticles allowed the development of functional bioinspired constructs. This review discusses the composition, design, and applications of bioinspired nanocomposite constructs based on bioactive glass nanoparticles (BGNPs).

Scaffolds of hydroxyl apatite nanoparticles disseminated in 1, 6-diisocyanatohexane-extended poly(1, 4-butylene succinate)/poly(methyl methacrylate) for bone tissue engineering

Poly(1, 4-butyl succinate) extended 1, 6-diisocyanatohexane (PBSu-DCH) polymers and Polymethylmethacrylate (PMMA) scaffolds decorated with nano hydroxyl apatite have been prepared and characterized for regeneration of bone in cranio-maxillofacial region. Synthesized scaffolds revealed good response in bone regeneration and excellent cell viability in comparison to commercial available glass plate, which lead to better proliferation of MG-63 cell lines. Additionally, they demonstrate high porosity and excellent water retention ability. Moreover, controlled degradation (in pH=7.4) and sustained drug release in pH (4.5 and 7.4) are advantages of these scaffolds to serve as delivery vehicles for therapeutic drugs. Samples also provide the protection against Escherichia coli and Methicillin Resistant Staphylococcus aureus microorganisms which can be helpful for quick recovery of the patient. In-vitro inflammatory response has been assessed via adsorption of human plasma/serum proteins on the surface of the scaffolds. Results suggest that prepared scaffolds have good bone regeneration ability and provide friendly environment for the cell growth with the additional advantage of protection of the surrounding tissues from microbial infection. With all these features, it is speculated that these scaffolds will have wide utility in the area of tissue engineering and regenerative medicine.