Novel microparticulate systems for the vaginal delivery of nystatin: Development and characterization

Vaginal mycobiome characteristics and therapeutic strategies in vulvovaginal candidiasis (VVC): differentiating pathogenic species and microecological features for stratified treatment

SUMMARYVulvovaginal candidiasis (VVC) is a prevalent global health burden, particularly among reproductive-aged women. Recurrent VVC affects a significant proportion of this population, presenting therapeutic challenges. The predominant pathogen, Candida albicans, opportunistically transitions from a commensal organism to a pathogen when microenvironmental conditions become dysregulated. Recently, non-albicans Candida species have gained attention for their reduced antifungal susceptibility and recurrence tendencies. Diagnosis is constrained by the limitations of conventional microbiological techniques, while emerging molecular assays offer enhanced pathogen detection yet lack established thresholds to differentiate between commensal and pathogenic states. Increasing resistance issues are encountered by traditional azole-based antifungals, necessitating innovative approaches that integrate microbiota modulation and precision medicine. Therefore, this review aims to systematically explore the pathogenic diversity, drug resistance mechanisms, and biofilm effects of Candida species. Vaginal microbiota (VMB) alterations associated with VVC were also examined, focusing on the interaction between Lactobacillus spp. and pathogenic fungi, emphasizing the role of microbial dysbiosis in disease progression. Finally, the potential therapeutic approaches for VVC were summarized, with a particular focus on the use of probiotics to modulate the VMB composition and restore a healthy microbial ecosystem as a promising treatment strategy. This review addresses antifungal resistance and adopts a microbiota-centric approach, proposing a comprehensive framework for personalized VVC management to reduce recurrence and improve patient outcomes.

Caspofungin formulations for buccal and sublingual mucosae anti-fungal infections: physicochemical characterization, rheological analysis, release and ex vivo permeability profiles

AIM

Oral candidiasis is often challenging due to limited effectiveness of topical treatments. This study aimed to develop novel caspofungin formulations for administration onto the oral mucosa to enhance drug retention and efficacy.

METHOD

Five caspofungin (2%, w/v) formulations were developed to assess their permeability, retention and mucoadhesiveness. Ex vivo permeability assays were performed on buccal and sublingual mucosae, and histological analyses conducted to evaluate tissue tolerance.

RESULTS

Formulation composed of chitosan demonstrated the highest retention in both buccal (5183.24 ± 587.32 µg/cm2) and sublingual (1090.72 ± 110.26 µg/cm2) mucosae. Other formulations exhibited significantly lower retention, ranging from 7.53 ± 0.81 to 1852.10 ± 193.24 µg/cm2 in buccal mucosa and 1.64 ± 0.14 to 317.74 ± 31.78 µg/cm2 in sublingual mucosa. Chitosan-based formulation exhibited the highest mucoadhesive strength, with values of 5179.05 ± 31.99 mN/cm2 for buccal and 7026.10 ± 123.41 mN/cm2 for sublingual mucosae, and also superior extensibility, which facilitates application in the oral cavity. All formulations showed antifungal activity against Candida spp., and histological analyses revealed minor epithelial alterations.

CONCLUSION

The developed formulations offer distinct advantages for treating oral candidiasis, with chitosan formulation emerging as the most promising due to its superior retention, mucoadhesion force, and spreadability, making it a potential candidate for further clinical investigation.

Reviving the interest in the versatile drug nystatin: A multitude of strategies to increase its potential as an effective and safe antifungal agent

Nystatin is an antifungal molecule with a remarkable yet squandered versatility. In this review, its mechanism of action is explored, along with its extensive action spectrum and toxicity. A multitude of methodologies to tackle the drug's physical and chemical hurdles are outlined along with some proven-effective strategies to increase its activity and/or decrease its toxicity. A separate detailed section focused on micro and nanotechnology solutions addresses new drug delivery systems made of polymeric, metallic or lipid materials. Although the topical route depicts greater representativeness amongst these formulations, the intravenous, dental, oral, vaginal and inhalation routes are also mentioned. The unsuccessful previous attempts at developing parenteral formulations of nystatin or even the withdrawal of a nystatin-loaded multilamellar liposome should not divert research away from this drug. In fact, the interest in nystatin ought to be reawakened with the ongoing clinical trials on the promising nystatin-like genetically engineered derivate BSG005.

Oral delivery of brain-targeted miltefosine-loaded alginate nanoparticles functionalized with polysorbate 80 for the treatment of cryptococcal meningitis

OBJECTIVES

To develop alginate nanoparticles functionalized with polysorbate 80 (P80) as miltefosine carriers for brain targeting in the oral treatment of cryptococcal meningitis.

METHODS

Miltefosine-loaded alginate nanoparticles functionalized or not with P80 were produced by an emulsification/external gelation method and the physicochemical characteristics were determined. The haemolytic activity and cytotoxic and antifungal effects of nanoparticles were assessed in an in vitro model of the blood-brain barrier (BBB). A murine model of disseminated cryptococcosis was used for testing the efficacy of oral treatment with the nanoparticles. In addition, serum biomarkers were measured for toxicity evaluation and the nanoparticle biodistribution was analysed.

RESULTS

P80-functionalized nanoparticles had a mean size of ∼300 nm, a polydispersity index of ∼0.4 and zeta potential around -50 mV, and they promoted a sustained drug release. Both nanoparticles were effective in decreasing the infection process across the BBB model and reduced drug cytotoxicity and haemolysis. In in vivo cryptococcosis, the oral treatment with two doses of P80 nanoparticles reduced the fungal burden in the brain and lungs, while the non-functionalized nanoparticles reduced fungal amount only in the lungs, and the free miltefosine was not effective. In addition, the P80-functionalization improved the nanoparticle distribution in several organs, especially in the brain. Finally, treatment with nanoparticles did not cause any toxicity in animals.

CONCLUSIONS

These results support the potential use of P80-functionalized alginate nanoparticles as miltefosine carriers for non-toxic and effective alternative oral treatment, enabling BBB translocation and reduction of fungal infection in the brain.

Preparation, characterization and properties of three different nanomaterials either alone or loaded with nystatin or fluconazole antifungals

Engineered nanoparticles have enabled the development of novel uses, particularly in disease management. In this investigation, we synthesized and studied three distinct nanomaterials: solid lipid nanoparticles (SLNPs), chitosan nanoparticles (CSNPs), and carbon nanotubes (CNTs), either alone or loaded with two antifungals, nystatin, and fluconazole. The purpose of this study is to investigate the different properties of the produced nanomaterials, either alone or in combination with antifungals. Drug release studies revealed that about 55% from SLNPs, 43% from CSNPs and 97% from CNTs of nystatin drug were released at the longest time point assessed (12 h). In addition, about 89% from SLNPs, 84% from CSNPs and 81% from CNTs of fluconazole drug were released at the longest time point assessed (12 h). This research will expand the understanding of nanomaterials as a viable technique for the management of different fungal diseases that harm several agricultural crops.

In vitro and ex vivo models for evaluating vaginal drug delivery systems

Vaginal drug delivery systems are often preferred for treating a variety of diseases and conditions of the female reproductive tract (FRT), as delivery can be more targeted with less systemic side effects. However, there are many anatomical and biological barriers to effective treatment via the vaginal route. Further, biocompatibility with the local tissue and microbial microenvironment is desired. A variety of in vitro and ex vivo models are described herein for evaluating the physicochemical properties and toxicity profile of vaginal drug delivery systems. Deciding whether to utilize organoids in vitro or fresh human cervicovaginal mucus ex vivo requires careful consideration of the intended use and the formulation characteristics. Optimally, in vitro and ex vivo experimentation will inform or predict in vivo performance, and examples are given that describe utilization of a range of methods from in vitro to in vivo. Lastly, we highlight more advanced model systems for other mucosa as inspiration for the future in model development for the FRT.

Alginate as a Promising Biopolymer in Drug Delivery and Wound Healing: A Review of the State-of-the-Art

Biopolymeric nanoparticulate systems hold favorable carrier properties for active delivery. The enhancement in the research interest in alginate formulations in biomedical and pharmaceutical research, owing to its biodegradable, biocompatible, and bioadhesive characteristics, reiterates its future use as an efficient drug delivery matrix. Alginates, obtained from natural sources, are the colloidal polysaccharide group, which are water-soluble, non-toxic, and non-irritant. These are linear copolymeric blocks of α-(1→4)-linked l-guluronic acid (G) and β-(1→4)-linked d-mannuronic acid (M) residues. Owing to the monosaccharide sequencing and the enzymatically governed reactions, alginates are well-known as an essential bio-polymer group for multifarious biomedical implementations. Additionally, alginate’s bio-adhesive property makes it significant in the pharmaceutical industry. Alginate has shown immense potential in wound healing and drug delivery applications to date because its gel-forming ability maintains the structural resemblance to the extracellular matrices in tissues and can be altered to perform numerous crucial functions. The initial section of this review will deliver a perception of the extraction source and alginate’s remarkable properties. Furthermore, we have aspired to discuss the current literature on alginate utilization as a biopolymeric carrier for drug delivery through numerous administration routes. Finally, the latest investigations on alginate composite utilization in wound healing are addressed.

Preparation and ex vivo investigation of an injectable microparticulate formulation for gastrointestinal mucosa polyp resection

Endoscopic submucosal dissection (ESD) and endoscopic submucosal resection (EMR) are non-invasive endoscopic techniques. They allow an early excised gastrointestinal (GI) mucosal precancerous lessions. For their application is necessary use of a submucosal injection that lift area to excise. The main objective of this study was the preparation of microparticulate-based fluid for injection in the GI submucosa. Alginate microparticles (MPs) were developed by the solvent displacement technique and characterized by particle size, surface electrical properties, swelling, degradation, rheology, adhesion and leakage, syringeablity and stability. Furthermore, their potential to form a submucosal cushion was assayed in porcine stomach mucosa and porcine colon mucosa. Results showed MPs sizes below 160 μm, negative surface charge around -50 mV at pH=6, high rates of swelling and good adhesion. The microparticulate-based fluid exhibited pseudoplastic behavior following the Ostwald-de Waele rheological model. A brief force is sufficient for its injection through a syringe. Finally, formulations were able to provide a submucosa elevation of 1.70 cm for more than 90 min and 120 min in the porcine stomach and colon, respectively.

Chitosan-Based Therapeutic Systems for Superficial Candidiasis Treatment. Synergetic Activity of Nystatin and Propolis

The paper deals with new approaches to chitosan (CS)-based antifungal therapeutic formulations designed to fulfill the requirements of specific applications. Gel-like formulations were prepared by mixing CS dissolved in aqueous lactic acid (LA) solution with nystatin (NYS) powder and/or propolis (PRO) aqueous solution dispersed in glycerin, followed by water evaporation to yield flexible mesoporous (pore widths of 2-4 nm) films of high specific surfaces between 1 × 103 and 1.7 × 103 m2/g. Morphological evaluation of the antifungal films showed uniform dispersion and downsizing of NYS crystallites (with initial sizes up to 50 μm). Their mechanical properties were found to be close to those of soft tissues (Young's modulus values between 0.044-0.025 MPa). The films presented hydration capacities in physiological condition depending on their composition, i.e., higher for NYS-charged (628%), as compared with PRO loaded films (118-129%). All NYS charged films presented a quick release for the first 10 min followed by a progressive increase of the release efficiency at 48.6%, for the samples containing NYS alone and decreasing values with increasing amount of PRO to 45.9% and 42.8% after 5 h. By in vitro analysis, the hydrogels with acidic pH values around 3.8 were proven to be active against Candida albicans and Candida glabrata species. The time-killing assay performed during 24 h on Candida albicans in synthetic vagina-simulative medium showed that the hydrogel formulations containing both NYS and PRO presented the faster slowing down of the fungal growth, from colony-forming unit (CFU)/mL of 1.24 × 107 to CFU/mL < 10 (starting from the first 6 h).

Application of Sol–Gels for Treatment of Gynaecological Conditions—Physiological Perspectives and Emerging Concepts in Intravaginal Drug Delivery

Approaches for effective and sustained drug delivery to the female reproductive tract (FRT) for treating a range of gynaecological conditions remain limited. The development of versatile delivery platforms, such as soluble gels (sol–gels) coupled with applicators/devices, holds considerable therapeutic potential for gynaecological conditions. Sol–gel systems, which undergo solution-to-gel transition, triggered by physiological conditions such as changes in temperature, pH, or ion composition, offer advantages of both solution- and gel-based drug formulations. Furthermore, they have potential to be used as a suitable drug delivery vehicle for other novel drug formulations, including micro- and nano-particulate systems, enabling the delivery of drug molecules of diverse physicochemical character. We provide an anatomical and physiological perspective of the significant challenges and opportunities in attaining optimal drug delivery to the upper and lower FRT. Discussion then focuses on attributes of sol–gels that can vastly improve the treatment of gynaecological conditions. The review concludes by showcasing recent advances in vaginal formulation design, and proposes novel formulation strategies enabling the infusion of a wide range of therapeutics into sol–gels, paving the way for patient-friendly treatment regimens for acute and chronic FRT-related conditions such as bacterial/viral infection control (e.g., STDs), contraception, hormone replacement therapy (HRT), infertility, and cancer.

Women-specific routes of administration for drugs: A critical overview

The woman's body presents a number of unique anatomical features that can constitute valuable routes for the administration of drugs, either for local or systemic action. These are associated with genitalia (vaginal, endocervical, intrauterine, intrafallopian and intraovarian routes), changes occurring during pregnancy (extra-amniotic, intra-amniotic and intraplacental routes) and the female breast (breast intraductal route). While the vaginal administration of drug products is common, other routes have limited clinical application and are fairly unknown even for scientists involved in drug delivery science. Understanding the possibilities and limitations of women-specific routes is of key importance for the development of new preventative, diagnostic and therapeutic strategies that will ultimately contribute to the advancement of women's health. This article provides an overview on women-specific routes for the administration of drugs, focusing on aspects such as biological features pertaining to drug delivery, relevance in current clinical practice, available drug dosage forms/delivery systems and administration techniques, as well as recent trends in the field.

Recent Advances in Polymer-Based Vaginal Drug Delivery Systems

The vagina has been considered a potential drug administration route for centuries. Most of the currently marketed and investigated vaginal formulations are composed with the use of natural or synthetic polymers having different functions in the product. The vaginal route is usually investigated as an administration site for topically acting active ingredients; however, the anatomical and physiological features of the vagina make it suitable also for drug systemic absorption. In this review, the most important natural and synthetic polymers used in vaginal products are summarized and described, with special attention paid to the properties important in terms of vaginal application. Moreover, the current knowledge on the commonly applied and innovative dosage forms designed for vaginal administration was presented. The aim of this work was to highlight the most recent research directions and indicate challenges related to vaginal drug administrations. As revealed in the literature overview, intravaginal products still gain enormous scientific attention, and novel polymers and formulations are still explored. However, there are research areas that require more extensive studies in order to provide the safety of novel vaginal products.

Nanoparticles as a Tool for Broadening Antifungal Activities

Fungal infections are diseases that are considered neglected although their infection rates have increased worldwide in the last decades. Thus, since the antifungal arsenal is restricted and many strains have shown resistance, new therapeutic alternatives are necessary. Nanoparticles are considered important alternatives to promote drug delivery. In this sense, the objective of the present study was to evaluate the contributions of newly developed nanoparticles to the treatment of fungal infections. Studies have shown that nanoparticles generally improve the biopharmaceutical and pharmacokinetic characteristics of antifungals, which is reflected in a greater pharmacodynamic potential and lower toxicity, as well as the possibility of prolonged action. It also offers the proposition of new routes of administration. Nanotechnology is known to contribute to a new drug delivery system, not only for the control of infectious diseases but for various other diseases as well. In recent years, several studies have emphasized its application in infectious diseases, presenting better alternatives for the treatment of fungal infections.

Preparation and evaluation of an oral mucoadhesive gel containing nystatin-loaded alginate microparticles

Nystatin is an antifungal agent used for prophylaxis and treatment of candidiasis, especially oral mycosis. Efficacy of nystatin conventional dosage forms is limited by the short residence time and bitter taste of the drug. This research aims at designing an optimized formulation of oral mucoadhesive gel of nystatin-loaded alginate microparticles, which can be retained in the mouth. Sodium alginate solution containing nystatin was added to the solution of calcium chloride under stirring. Microparticles containing nystatin were incorporated into the Carbopol gel. Size, loading, and release profile and mucoadhesion were investigated. The most suitable microparticles with particle size of < 250 μm were prepared with alginate concentration of 1%(w/v), calcium chloride of 1%(w/v), drug:polymer concentration 1%, and ratio of alginate solution:calcium chloride of 1:10. This formulation showed 49.1% drug loading and 98.2% encapsulation efficiency. Carbopol 934 gel provided optimal mucoadhesive properties. Release profile proved a burst release, which can be attributed to the surface associated drug, followed by a slower sustained release phase for all microparticles. The developed system with ability to adhere to the oral mucosa has great appeal for treatment of localized infections and can mask bitter taste of the drug and be retained in the mouth for long periods.

Bursting the Virulence Traits of MDR Strain of Candida albicans Using Sodium Alginate-based Microspheres Containing Nystatin-loaded MgO/CuO Nanocomposites

INTRODUCTION

Candida albicans is a major opportunistic pathogen that causes a wide range of human infections. Currently available therapeutic agents are limited for treating these fungal infections due to multidrug resistance as well as their nonbiodegradability, poor biocompatibility and toxicity. In order to battle these limitations, we have synthesized a polymeric system as microcarriers to deliver the antifungal drug. The objective of the present study was to immobilize MgO/CuO nanocomposite and nystatin-loaded MgO/CuO nanocomposites in nontoxic, nonimmunogenic, biodegradable and biocompatible sodium alginate microspheres for the first time.

MATERIALS AND METHODS

Nanoparticle-loaded sodium alginate microspheres were prepared by ionotropic gelation technique using calcium chloride as a cross-linker. Synthesized microspheres were characterized using standard characterization techniques and were evaluated for biological activity against MDR strain of C. albicans.

RESULTS

Characterization of microspheres by Fourier-transform infrared spectroscopy confirmed loading of Nys-MgO/CuO NPs, scanning electron microscopy (SEM) revealed rough spherical beads with a highly porous surface having an average size in the range of 8-10 µm. X-ray diffraction (XRD) analyzed its semicrystalline structure. Entrapment efficiency of Nys-MgO/CuO NPs was 80% and release kinetic study revealed sustained and prolonged release of drug in pH 5.5. Flow cytometry analysis showed yeast cell death caused by Nys-MgO/CuO MS exhibits late apoptotic features. In cytotoxicity assay 5-14 mg of microspheres did not cause hemolysis. Microspheres reduced virulence traits of C. albicans such as germ tube and biofilm formation were compromised at concentration of 5 mg/mL. Antimicrobial assessment results revealed a pronounced inhibitory effect against C. albicans.

CONCLUSION

The in vitro experiments have shown promising results based on good stability, Nys-MgO/CuO NP-encapsulated microspheres can be used as a prolonged controlled release system against MDR pathogenic C. albicans.

Development and microbiological evaluation of chitosan and chitosan-alginate microspheres for vaginal administration of metronidazole

Metronidazole is the drug of choice in the treatment of bacterial vaginosis, but the oral therapy can induce several collateral effects. Aim of this work was the development of a vaginal multiparticulate system, loaded with metronidazole, able to improve its residence time allowing a complete drug release. Several kinds of MS were prepared using chitosan dissolved in different organic acids or alginate coated with chitosan. FTIR and DSC analyses were performed to study the interactions between the drug and the polymers, while MS morphology was investigated with optical and electron microscopy. All the formulations were characterized in terms of drug entrapment efficiency, mucoadhesion, swelling capacity and drug release behavior, demonstrating the best results for alginate MS coated with chitosan. The formulations evidenced a complete and rapid release of drug, compared with the commercial form: Zidoval®.The best formulations assayed for antibacterial activity confirmed the suitability of this new formulation for the vaginal treatment of local diseases.

Recent Advances in Vaginal Delivery for the Treatment of Vulvovaginal Candidiasis

BACKGROUND

Vulvovaginal candidiasis (VVC) is a common vaginal infection caused by candida species, affecting 70% of the women. It may occur due to the imbalance in the vaginal micro- biodata, pregnancy, diabetes, use of antibiotics, frequent sexual activities or AIDS.

AIM

The main aim of this review is to provide overview about different vaginal delivery systems for the administration of antifungal agents like conventional, mucoadhesive and muco-penetrating delivery systems.

METHOD

The conventional delivery systems available have limited efficacy due to the less residence time and adverse effects. In order to overcome these issues, a delivery system with mucoadhesive and muco-penetrating properties is required. Mucoadhesive polymers have excellent binding properties with mucin and thus increasing residence time. On the other hand, muco-penetrating polymers transport the antifungal agents across the mucus layer.

RESULTS

This review summarizes the pathophysiology of VVC along with novel delivery systems for the treatment of infection through mucoadhesive and muco-penetrating approaches. Surface modifications of nano/ microparticles with mucoadhesive or muco-penetrating particles may provide delivery systems with improved therapeutic efficacy.

CONCLUSION

Based on the available data, conventional and mucoadhesive drug delivery systems have some limitations, they still require improvement/ development for safe and effective delivery of antifungal agents.

Ultrasound-Assisted Preparation of Exopolysaccharide/Nystatin Nanoemulsion for Treatment of Vulvovaginal Candidiasis

PURPOSE

As one of the classic anti-Canidia albicans (CA) and vulvovaginal candidiasis (VVC) drugs, nystatin (NYS) is limited by poor water solubility and easy aggregation. Traditional NYS vaginal delivery formulations do not fully adapt to the specific environment of the vaginal cavity. The use of exopolysaccharides (EPS) has great application potential in emulsifiers, but its use has not been reported in nanoemulsions. In this work, an EPS/NYS nanoemulsion (ENNE) was developed to improve the activities of NYS against CA and VVC.

METHODS

The ENNE was prepared by ultrasonic method using EPS as an emulsifier, liquid paraffin oil as an oil phase, PEG400 as a co-emulsifier, and NYS as the loaded drug. ENNE preparation was optimized by response surface method. After optimization, in vitro and in vivo analysis of the anti-CA activity; animal experiments; staining with propidium iodide (PI), periodic acid-schiff (PAS), and hematoxylin-eosin (H&E); and cytokine experiments were performed to investigate the therapeutic ability against VVC.

RESULTS

The optimal formulation and preparation parameters of ENNE were determined as follows: EPS content of 1.5%, PEG400 content of 3.2%, NYS content of 700 μg/mL, paraffin oil content of 5.0%, ultrasonic time of 15 min, and ultrasonic amplitude of 35%. The ENNE showed an encapsulated structure with an average particle size of 131.1 ± 4.32 nm. ENNE exhibited high storage and pH stability, as well as slow release. The minimum inhibitory concentration (MIC) of ENNE against CA was only 0.125 μg/mL and the inhibition zone was 19.0 ± 0.5 mm, for greatly improved anti-CA effect. The prepared ENNE destroyed the membrane of CA cells, and exhibited good anti-CA effect in vivo and therapeutic ability against VVC.

CONCLUSION

The results of this study will promote the application of EPS in nanotechnology, which should lead to new and effective local drug formulations for treating VVC.

Topical Pioglitazone Nanoformulation for the Treatment of Atopic Dermatitis: Design, Characterization and Efficacy in Hairless Mouse Model

Pioglitazone (PGZ) is a drug used to treat type 2 diabetes mellitus that has been reported to show additional therapeutic activities on diverse inflammatory parameters. The aim of this study was to optimize a topical PGZ-loaded nanoemulsion (PGZ-NE) in order to evaluate its effectiveness for treating atopic dermatitis (AD). The composition of the nanoformulation was established by pseudo-ternary diagram. Parameters such as physical properties, stability, in vitro release profile, and ex vivo permeation were determined. The efficacy study was carried out using oxazolone-induced AD model in hairless mice. PGZ-NE released the drug following a hyperbolic kinetic. Additionally, its properties provided high retention potential of drug inside the skin. Therapeutic benefits of PGZ-NE were confirmed on diverse events of the inflammatory process, such as reduction of lesions, enhancement of skin barrier function, diminished infiltration of inflammatory cells, and expression of pro-inflammatory cytokines. These results were reinforced by atomic force microscope (AFM), which demonstrated the ability of the formulation to revert the rigidification caused by oxazolone and consequently improve the elasticity of the skin. These results suggest that PGZ-NE may be a promising treatment for inflammatory dermatological conditions such as AD.

Topical Amphotericin B Semisolid Dosage Form for Cutaneous Leishmaniasis: Physicochemical Characterization, Ex Vivo Skin Permeation and Biological Activity

Amphotericin B (AmB) is a potent antifungal successfully used intravenously to treat visceral leishmaniasis but depending on the Leishmania infecting species, it is not always recommended against cutaneous leishmaniasis (CL). To address the need for alternative topical treatments of CL, the aim of this study was to elaborate and characterize an AmB gel. The physicochemical properties, stability, rheology and in vivo tolerance were assayed. Release and permeation studies were performed on nylon membranes and human skin, respectively. Toxicity was evaluated in macrophage and keratinocyte cell lines, and the activity against promastigotes and intracellular amastigotes of Leishmania infantum was studied. The AmB gel remained stable for a period of two months, with optimal properties for topical use and no apparent toxic effect on the cell lines. High amounts of AmB were found in damaged and non-damaged skin (1230.10 ± 331.52 and 2484.57 ± 439.12 µg/g/cm², respectively) and they were above the IC₅₀ of AmB for amastigotes. Although there were no differences in the in vitro anti-leishmanial activity between the AmB solution and gel, the formulation resulted in a higher amount of AmB being retained in the skin, and is therefore a candidate for further studies of in vivo efficacy.

Alginate nanoparticles as non-toxic delivery system for miltefosine in the treatment of candidiasis and cryptococcosis

Introduction and objective

Previous studies indicate that miltefosine (MFS) may be an alternative as an antifungal agent; however, it presents several adverse effects. Thus, the aim of this study was to produce miltefosine-loaded alginate nanoparticles (MFS.Alg) for toxicity reduction to be used as an alternative for the treatment of cryptococcosis and candidiasis.

Methods

Alginate nanoparticles were produced using the external emulsification/gelation method, and their physicochemical and morphological characteristics were analyzed. MFS encapsulation efficiency, release assay and toxicity on red blood cells and on Galleria mellonella larvae were assessed. The antifungal activity was evaluated using in vitro and in vivo larval models of G. mellonella infected with Candida albicans (SC5314 and IAL-40), Cryptococcus neoformans H99 and Cryptococcus gattii ATCC 56990. The treatment efficacy was evaluated by survival curve, colony forming unit (CFU) counting and histopathological analysis.

Results

MFS.Alg nanoparticles presented a mean size of 279.1±56.7 nm, a polydispersity index of 0.42±0.15 and a zeta potential of -39.7±5.2 mV. The encapsulation efficiency of MFS was 81.70±6.64%, and its release from the nanoparticles occurred in a sustained manner. MFS in alginate nanoparticles presented no hemolytic effect and no toxicity in G. mellonella larvae. Treatment with MFS.Alg extended the survival time of larvae infected with C. albicans and C. gattii. In addition, the fungal burden reduction was confirmed by CFU and histopathological data for all groups treated with 200 mg/Kg of MFS.Alg.

Conclusion

These results support the use of alginate-based drug delivery systems as carriers for MFS for drug toxicity reduction and control of the fungal infection in the in vivo model of G. mellonella.

Development of Pranoprofen Loaded Nanostructured Lipid Carriers to Improve Its Release and Therapeutic Efficacy in Skin Inflammatory Disorders

Pranoprofen (PF)-loaded nanostructured lipid carriers (NLCs), prepared using a high-pressure homogenization method, have been optimized and characterized to improve the biopharmaceutical profile of the drug. The optimized PF-NLCs exhibited physicochemical characteristics and morphological properties that were suitable for dermal application. Stability assays revealed good physical stability, and the release behavior of PF from these NLCs showed a sustained release pattern. Cell viability results revealed no toxicity. Ex vivo human skin permeation studies in Franz diffusion cells were performed to determine the influence of different skin penetration enhancers (pyrrolidone, decanol, octanoic acid, nonane, menthone, squalene, linoleic acid, and cineol) on skin penetration and retention of PF, being the highest dermal retention in the presence of linoleic acid. The selected formulations of NLCs exhibited a high retained amount of PF in the skin and no systemic effects. In vivo mice anti-inflammatory efficacy studies showed a significant reduction in dermal oedema. NLCs containing linoleic acid presented better anti-inflammatory efficacy by decreasing the production of interleukins in keratinocytes and monocytes. The biomechanical properties of skin revealed an occlusive effect and no hydration power. No signs of skin irritancy in vivo were detected. According to these results, dermal PF-NLCs could be an effective system for the delivery and controlled release of PF, improving its dermal retention, with reduced dermal oedema as a possible effect of this drug.

Clotrimazole multiple W/O/W emulsion as anticandidal agent: Characterization and evaluation on skin and mucosae

Clotrimazole (CLT) was formulated in a multiple W/O/W emulsion (ME) with the aim of evaluating its potential as topical anticandidal agent and comparing with marketed products. A previously evaluated CLT-ME was selected and physicochemically characterized. The in vitro release behavior and the ex vivo permeation profiles were assessed using Franz diffusion cells using three different types of biological membranes: human skin and porcine buccal, sublingual and vaginal mucosae. The antifungal activity against Candida strains was also tested. Results showed CLT-MEs sizes of 29.206 and 47.678 μm with skin compatible pH values of 6.47 and 6.42 exhibiting high zeta potential values of -55.13 and -55.59 mV with dependence on the pH variation. The physicochemical stability was kept for a period of 180 days of storage at room temperature. CLT-MEs exhibited pseudoplastic behavior with hysteresis areas and viscosities of 286 and 331 mPa⋅s showing higher spreadability properties than commercial counterparts. An improved CLT release pattern was supplied by the ME system following a hyperbolic model. Likewise, ME system gave higher skin permeation flux of CLT than commercial reference. CLT amounts retained in the skin and mucosae were also higher than commercial references, which coupled with the higher antimycotic efficacy make CLT-MEs a great tool for clinical investigation of topical candidiasis treatments.

Biopharmaceutical profile of a clotrimazole nanoemulsion: Evaluation on skin and mucosae as anticandidal agent

Clotrimazole (CLT) was formulated in a nanoemulsion (NE) for the topical treatment of candidiasis consisting of 10% labrafac^® lipophile, 60% labrasol^®:capryol^® 90 mixture (ratio 4:1) and 30% propylene glycol. Physicochemical properties, stability, rheology, in vitro drug release, ex vivo drug permeation through human skin and porcine buccal, sublingual and vaginal mucosae, antifungal efficacy, as well as in vivo skin tolerance were evaluated. 1% CLT-NE (CLT-NE1) and 2% CLT-NE (CLT-NE2) exhibited 153 ± 17.25 and 186 ± 15.38 nm droplet sizes, low polydispersity indexes, negative zeta potentials and biocompatible pH values. The CLT-NEs exhibited typical Newtonian profiles with viscosities of 42.14 ± 0.037 mPa·s and 41.35 ± 0.041 mPa·s, respectively and higher extensibility properties than commercial counterparts retaining their physicochemical properties for 180 days. NEs provided a sustained release of drug according to the first order model. Similar skin permeation properties were observed between CLT-NE1 and commercial reference. However, significant higher CLT amounts retained in mucosae were provided by CLT-NE2 when compared with references. Antifungal efficacies were also higher than commercial references, and the in vivo tolerance study confirmed the suitability for topical application, making CLT-NEs a great tool for clinical investigation of topical candidiasis treatments.

Nanolipid Gel of an Antimycotic Drug for Treating Vulvovaginal Candidiasis-Development and Evaluation

This paper focuses on the development and evaluation of mucoadhesive vaginal gel of fluconazole using nanolipid carriers to enhance tissue deposition in treating vulvovaginal candidiasis. Treatment of vulvovaginal candidiasis includes antimycotic agents prescribed for 1 to 7 days or longer, in relapse either orally or topically. The delivery of fluconazole as nanolipid carriers in vaginal gel can be proposed as suitable alternative to the existing conventional formulations to improve the patient acceptability, compliance and localized drug action. The nanolipid carriers of fluconazole were prepared by phase inversion temperature technique and incorporated into Carbopol 974P as gelling polymer. GRAS excipients selected and optimized were Precirol ATO 5, oleic acid and Kolliphor RH 40 to produce nanolipid dispersions. Stable nanolipid dispersions were developed using sodium dodecyl sulfate as the charge inducer. The optimized nanolipid dispersion of fluconazole had particle size, polydispersity index and zeta potential value of 158.33 ± 2.55 nm, 0.278 ± 0.003 and - 27.33 ± 0.40 mV, respectively and the average entrapment of fluconazole in the lipid carriers was found to be 67.24 ± 0.87%. The optimized vaginal gel had satisfactory mucoadhesive strength and rheological properties to facilitate vaginal application. The fluconazole release from the gel was sustained showing 30.69 ± 1.02% drug deposition in the porcine vaginal mucosa at the end of 8 h with improved antifungal activity against Candida albicans during well diffusion studies. The optimized gel was non-irritant to the vaginal mucosa of female Wistar rats with no signs of erythema or edema.

Potential Use of Alginate-Based Carriers As Antifungal Delivery System

Fungal infections have become a major public health problem, growing in number and severity in recent decades due to an increase of immunocompromised patients. The use of therapeutic agents available to treat these fungal infections is limited by their toxicity, low bioavailability, antifungal resistance, and high cost of treatment. Thus, it becomes extremely important to search for new therapeutic options. The use of polymeric systems as drug carriers has emerged as a promising alternative to conventional formulations for antifungals. Alginate is a natural polymer that has been explored in the last decade for development of drug delivery systems due to its non-toxicity, biodegradability, biocompatibility, low cost, mucoadhesive, and non-immunogenic properties. Several antifungal agents have been incorporated in alginate-based delivery systems, including micro and nanoparticles, with great success, displaying promising in vitro and in vivo results for antifungal activities, reduction in the toxicity and the total drug dose used in the treatment, and improved bioavailability. This review aims at discussing the potential use and benefits of alginate-based nanocarriers and other delivery systems containing antifungal agents in the therapy of fungal infections.

Novel Spray Dried Glycerol 2-Phosphate Cross-Linked Chitosan Microparticulate Vaginal Delivery System-Development, Characterization and Cytotoxicity Studies

Chitosan microparticulate delivery systems containing clotrimazole were prepared by a spray drying technique using glycerol 2-phosphate as an ion cross-linker. The impact of a cross-linking ratio on microparticle characteristics was evaluated. Drug-free and drug-loaded unmodified or ion cross-linked chitosan microparticles were examined for the in vitro cytotoxicity in VK2/E6E7 human vaginal epithelial cells. The presence of glycerol 2-phosphate influenced drug loading and encapsulation efficacy in chitosan microparticles. By increasing the cross-linking ratio, the microparticles with lower diameter, moisture content and smoother surface were observed. Mucoadhesive studies displayed that all formulations possessed mucoadhesive properties. The in vitro release profile of clotrimazole was found to alter considerably by changing the glycerol 2-phosphate/chitosan ratio. Results from cytotoxicity studies showed occurrence of apoptotic cells in the presence of chitosan and ion cross-linked chitosan microparticles, followed by a loss of membrane potential suggesting that cell death might go through the mitochondrial apoptotic pathway.

Alginate: Current Use and Future Perspectives in Pharmaceutical and Biomedical Applications

Over the last decades, alginates, natural multifunctional polymers, have increasingly drawn attention as attractive compounds in the biomedical and pharmaceutical fields due to their unique physicochemical properties and versatile biological activities. The focus of the paper is to describe biological and pharmacological activity of alginates and to discuss the present use and future possibilities of alginates as a tool in drug formulation. The recent technological advancements with using alginates, issues related to alginates suitability as matrix for three-dimensional tissue cultures, adjuvants of antibiotics, and antiviral agents in cell transplantation in diabetes or neurodegenerative diseases treatment, and an update on the antimicrobial and antiviral therapy of the alginate based drugs are also highlighted.

Recent progresses in bioadhesive microspheres via transmucosal administration

Based on the advantages of adhesion preparations and the application status of microspheres (MSs) in mucous delivery, this paper primarily reviews the bioadhesive MSs via transmucosal administration routes, including the mucosa in alimentary tract and other lumens. Particularly, the detailed researches about of celladhesive MSs and some new-style bioadhesive MSs are mentioned. Furthermore, this review attempts to reveal the advances of bioadhesive MSs as cell-selective bioadhesion systems and the stimuli-responsive MSs as location-specific drug delivery systems. Although these MSs show powerful strength, some far-sighted ideas should be brought on agendas. In the future, mechanisms should be put under tight scrutiny and more attention should be focused on the excellent bioadhesive materials and the 'second generation mucoadhesives'. Meaningful clinical applications of these novel MSs are also of current concerns and need more detailed researches.

Mucoadhesive and thermogelling systems for vaginal drug delivery

This review focuses on two formulation approaches, mucoadhesion and thermogelling, intended for prolonging residence time on vaginal mucosa of medical devices or drug delivery systems, thus improving their efficacy. The review, after a brief description of the vaginal environment and, in particular, of the vaginal secretions that strongly affect in vivo performance of vaginal formulations, deals with the above delivery systems. As for mucoadhesive systems, conventional formulations (gels, tablets, suppositories and emulsions) and novel drug delivery systems (micro-, nano-particles) intended for vaginal administration to achieve either local or systemic effect are reviewed. As for thermogelling systems, poly(ethylene oxide-propylene oxide-ethylene oxide) copolymer-based and chitosan-based formulations are discussed as thermogelling systems. The methods employed for functional characterization of both mucoadhesive and thermogelling drug delivery systems are also briefly described.

New strategies for local treatment of vaginal infections

Vaginal infections are extremely prevalent, particularly among women of reproductive age. Although they do not result in high mortality rates, these infections are associated with high levels of anxiety and reduction of quality of life. In most cases, topical treatment of vaginal infections has been shown to be at least as effective as oral treatment, resulting in higher local drug concentrations, with fewer drug interactions and adverse effects. Furthermore, the emergence of microbial resistance to chemotherapeutics and the difficulties in managing infection recurrences sustain the need for more effective local treatments. However, conventional dosage forms have been associated with low retention in the vagina and discomfort. Formulation strategies such as the development of bioadhesive, thermogelling systems and microtechnological or nanotechnological approaches have been proposed to improve delivery of traditional drugs, and other treatment modalities such as new drugs, plant extracts, and probiotics are being studied. This article reviews the recent strategies studied to improve the treatment and prevention of the commonest vaginal infections-namely, vaginal bacteriosis, aerobic vaginitis, vulvovaginal candidosis, and trichomoniasis-through the intravaginal route.

Polymeric films as a promising carrier for bioadhesive drug delivery: Development, characterization and optimization

Bioadhesive films using tamarind seed polysaccharide were prepared for the treatment of candida vaginitis using nystatin as the model drug. Films were prepared by solvent casting method. A 3² factorial design was employed to study the effect of independent variables (polymer and plasticizer concentration) on a range of dependent variables namely mechanical, swelling, interfacial, and bioadhesive properties through response surface methodological approach, using Design Expert® software. Formulation composition that provided the most desired and optimized results was selected using desirability approach. Nystatin was solubilized using Tween 60 and was incorporated into the selected film. Drug solubilization and dispersion were confirmed by scanning electron microscopy and differential scanning calorimetry. The optimized film released 73.92 ± 2.54% of nystatin at the end of 8 h in simulated vaginal fluid and the release data showed best fit to Korsmeyer–Peppas model with R² of 0.9990 and the release mechanism to be super case-II. The optimized film also showed appropriate anti candida activity through appearance of zone of inhibition during antifungal activity testing study.

Permeation studies through porcine small intestine of furosemide solutions for personalised paediatric administration

Personalized medicine is a challenging research area in paediatric drug design since no suitable pharmaceutical forms are currently available. Furosemide is an anthranilic acid derivative used in paediatric practice to treat cardiac and pulmonary disorders in premature infants and neonates. However, it is not commercialized in suitable dosage forms for paediatrics. Elaborating new paediatric formulations when no commercial forms are available is a common practice in pharmacy laboratories; amongst these, oral liquid formulations are the most common. We developed two extemporaneous paediatric oral solutions of furosemide (pure powder). The characterization and stability study were also performed. Parameters such as organoleptic characteristics, rheology, pH, content of active substance, and microbial stability were evaluated at three temperatures for two months. Evaluation of all these parameters showed that both solutions were stable for 60 days at 4 and 25 °C. Moreover, ex vivo studies were performed to evaluate the permeation behaviour of developed solutions through porcine small intestine to evaluate the potential paediatric biological parameters influencing the bioavailability and efficacy. A validated spectrofluorometric method was also used for this purpose. Our results guarantee a correct dosification, administration and potential efficacy of furosemide when is formulated in liquid oral forms for the treatment of cardiac and pulmonary disorders in children.

Enhancing effect of glucose microspheres in the viability of human mesenchymal stem cell suspensions for clinical administration

PURPOSE

A critical limiting factor of cell therapy is the short life of the stem cells. In this study, glucose containing alginate microspheres were developed and characterized to provide a sustained release system prolonging the viability of human mesenchymal stem cells (hMSCs) in a suspension for clinical application.

METHODS

The glucose microspheres were satisfactorily elaborated with alginate by emulsification/internal gelation method. Particle size was evaluated by light diffraction and optical microscopy. Shape and surface texture by scanning electron microscopy (SEM). Zeta potential, infrared spectra and release studies were also conducted. Also, rheological properties and stability of hMSCs suspensions with microspheres were tested. The viability of hMSCs was determined by trypan blue dye exclusion staining.

RESULTS

Microspheres of 86.62 μm, spherical shaped and -32.54 mV zeta potential with excellent stability, good encapsulation efficiency and providing an exponential release of glucose were obtained. hMSCs had better survival rate when they were packed with glucose microspheres. Microspheres maintained the aseptic conditions of the cell suspension without rheological, morphological or immunophenotypic disturbances on hMSCs.

CONCLUSIONS

Developed microspheres were able to enhance the functionality of hMSC suspension. This strategy could be broadly applied to various therapeutic approaches in which prolonged viability of cells is necessary.