Production optimization and expression of pectin releasing enzyme from Aspergillus oryzae PO

The postbiotic potential of Aspergillus oryzae - a narrative review

The filamentous fungus Aspergillus oryzae has a long tradition in East Asian food processing. It is therefore not surprising that in recent years fermentation products of A. oryzae have attracted attention in the emerging field of postbiotics. This review aims to provide a comprehensive summary of the potential postbiotic effects of fermentation products from A. oryzae, by discussing possible mechanisms of action against the background of the molecular composition determined so far. In particular, cell wall constituents, enzymes, extracellular polymeric substances, and various metabolites found in A. oryzae fermentation preparations are described in detail. With reference to the generally assumed key targets of postbiotics, their putative beneficial bioactivities in modulating the microbiota, improving epithelial barrier function, influencing immune responses, metabolic reactions and signaling through the nervous system are assessed. Drawing on existing literature and case studies, we highlight A. oryzae as a promising source of postbiotics, particularly in the context of animal health and nutrition. Challenges and opportunities in quality control are also addressed, with a focus on the necessity for standardized methods to fully harness the potential of fungal-based postbiotics. Overall, this article sheds light on the emerging field of A. oryzae-derived postbiotics and emphasizes the need for further research to fully realize their therapeutic potential.

Proteomic analysis of Viscozyme L and its major enzyme components for pectic substrate degradation

Enzymatic degradation of plant biomass requires the coordinated action of various enzymes. In this study, the production of reducing sugars from pectic substrates and sugar beet pulp (SBP) was investigated and compared using commercial enzyme preparations, including M2, pectinase (E1), Viscozyme L (V-L) and L-40. V-L, a cellulolytic enzyme mix produced by Aspergillus sp. was further evaluated as the most robust enzyme cocktail with the strongest SBP degradation ability in terms of the release of monosaccharides, methanol, and acetate from SBP. Mass-spectrometry-based proteomics analysis of V-L revealed 156 individual proteins. Of these, 101 proteins were annotated as containing a carbohydrate-active enzyme module. Notably, of the 50 most abundant proteins, ca. 44 % were predicted to be involved in pectin degradation. To reveal the role of individual putative key enzymes in pectic substrate decomposition, two abundant galacturonases (PglA and PglB), were heterologously expressed in Pichia pastoris and further characterized. PglA and PglB demonstrated maximum activity at 57 °C and 68 °C, respectively, and exhibited endo-type cleavage patterns towards polygalacturonic acid. Further studies along this line may lead to a better understanding of efficient SBP degradation and may help to design improved artificial enzyme mixtures with lower complexity for future application in biotechnology.

Production optimization, purification and characterization of a heat-tolerant acidic pectinase from Bacillus sp. ZJ1407

Medium compositions for a heat-tolerant acidic pectinase production from Bacillus sp. ZJ1407 were optimized via response surface methodology (RSM) and its enzymatic properties were investigated. A 2-level factorial design was used to estimate the main effect of factors, and to screen the significant factors. A central composite design was used to find out the optimal concentrations of screened key factors. Lactose, tryptone and (NH₄)₂SO₄ were found to have a significant influence on the pectinase activity (p <0.05). The optimal medium compositions were as follows: lactose 44.8g/l, tyrptone 30.9g/l, (NH₄)₂SO₄ 1.35g/l, MnSO₄·H₂O 0.2g/l, MgSO₄ 0.4g/l and NaCl 3.5g/l. Pectinase was purified to homogeneity by ammonium sulphate precipitation, DEAE-cellulose ion-exchange chromatography and Sephadex G-100 size-exclusion chromatography. The molecular weight of the purified pectinase determined by SDS-PAGE was about 23kDa, and its final specific activity was 110.47U/mg. Its optimal temperature and pH were 37°C and 5.0, respectively. Pectinase was very stable within a pH range of 3.0-5.0, and showed a high thermo-stability at 80 and 90°C. Ba²⁺ could significantly promote the activity of pectinase, and Mn²⁺ heavily inhibited its activity. This study provides new insight into the future development and use of pectinase from Bacillus sp. ZJ1407.

Production optimization of a heat-tolerant alkaline pectinase from Bacillus subtilis ZGL14 and its purification and characterization

Alkaline pectinase has important applications in the pretreatment of waste water from food processing and in both the fabric and paper industries. In this study, a 2-level factorial design was used to screen significant factors that affect the activity of alkaline pectinase, and the response surface methodology (RSM) with a Box-Behnken design (BBD) was used to optimize their concentrations. Starch, peptone, KH₂PO₄ and K₂HPO₄·3H₂O were found to significantly affect the activity of alkaline pectinase. Their optimal concentrations were as follows: 4.68% starch, 1.6% peptone, 0.26% KH₂PO₄ and 0.68% K₂HPO₄·3H₂O. Under the above conditions, the activity of alkaline pectinase was significantly improved to 734.11 U/mL. Alkaline pectinase was purified to homogeneity with a recovery rate of 9.6% and a specific activity of 52372.52 U/mg. Its optimal temperature and pH were 50°C and 8.6, respectively. The purified enzyme showed strong thermo-stability and good alkali resistance. In addition, the activity of alkaline pectinase was improved in the presence of Mg²⁺. Cu²⁺, Mn²⁺, and Co²⁺ significantly inhibited its activity. This study provides an important basis for the future development and use of a heat-tolerant alkaline pectinase from B. subtilis ZGL14.

Optimization of liquid-state fermentation conditions for the glyphosate degradation enzyme production of strain Aspergillus oryzae by ultraviolet mutagenesis

This study aimed to obtain strains with high glyphosate-degrading ability and improve the ability of glyphosate degradation enzyme by the optimization of fermentation conditions. Spore from Aspergillus oryzae A-F02 was subjected to ultraviolet mutagenesis. Single-factor experiment and response surface methodology were used to optimize glyphosate degradation enzyme production from mutant strain by liquid-state fermentation. Four mutant strains were obtained and named as FUJX 001, FUJX 002, FUJX 003, and FUJX 004, in which FUJX 001 gave the highest total enzyme activity. Starch concentration at 0.56%, GP concentration at 1,370 mg/l, initial pH at 6.8, and temperature at 30°C were the optimum conditions for the improved glyphosate degradation endoenzyme production of A. oryzae FUJX 001. Under these conditions, the experimental endoenzyme activity was 784.15 U/100 ml fermentation liquor. The result (784.15 U/100 ml fermentation liquor) was approximately 14-fold higher than that of the original strain. The result highlights the potential of glyphosate degradation enzyme to degrade glyphosate.

Novel α-L-arabinofuranosidase from Cellulomonas fimi ATCC 484 and its substrate-specificity analysis with the aid of computer

In the process of gene mining for novel α-L-arabinofuranosidases (AFs), the gene Celf_3321 from Cellulomonas fimi ATCC 484 encodes an AF, termed as AbfCelf, with potent activity, 19.4 U/mg under the optimum condition, pH 6.0 and 40 °C. AbfCelf can hydrolyze α-1,5-linked oligosaccharides, sugar beet arabinan, linear 1,5-α-arabinan, and wheat flour arabinoxylan, which is partly different from some previously well-characterized GH 51 AFs. The traditional substrate-specificity analysis for AFs is labor-consuming and money costing, because the substrates include over 30 kinds of various 4-nitrophenol (PNP)-glycosides, oligosaccharides, and polysaccharides. Hence, a preliminary structure and mechanism based method was applied for substrate-specificity analysis. The binding energy (ΔG, kcal/mol) obtained by docking suggested the reaction possibility and coincided with the experimental results. AbfA crystal 1QW9 was used to test the rationality of docking method in simulating the interaction between enzyme and substrate, as well the credibility of the substrate-specificity analysis method in silico.

Characterization of abnZ2 (yxiA1) and abnZ3 (yxiA3) in Paenibacillus polymyxa, encoding two novel endo-1,5-α-l-arabinanases

Background

Protopectinases which were consisted of various different enzymes can promote the solubilization of protopectin from the plant cell and can be applied in the protein industry extraction. The genome sequence of Paenibacillus polymyxa Z6 that produces a protopectinases complex was partially determined. Two new genes, yxiA1 and yxiA3, were identified as uncharacterized protein in the P. polymyxa genome. And, they were classified as the member of the glycoside hydrolase family 43 (GH43) according to the primary protein sequence.

Results

The two genes were cloned and expressed in Escherichia coli BL21 (DE3). And, the results indicated that the product of yxiA1 and yxiA3 were two endo-α-1,5-l-arabinanases. Thus, the two genes were renamed as abnZ2 (yxiA1) and abnZ3 (yxiA3). Recombinant AbnZ2 had optimal activity at pH 6.0 and 35°C. And, AbnZ3 had optimal activity at pH 6.0 and 30°C. However, unlike most reported endo-arabinanases, the specific activity of AbnZ3 remained 48.7% of maximum at 5°C, which meant AbnZ3 was an excellent cold-adapted enzyme.

Conclusions

This paper demonstrated that the gene yxiA1 and yxiA3 were two new endo-arabinanases, and renamed as abnZ2 and abnZ3. Moreover AbnZ3 was an excellent cold-adapted enzyme which could be attractive in fruit juice processing.

Cloning and characterization of a cold-adapted endo-1,5-α-L-arabinanase from Paenibacillus polymyxa and rational design for acidic applicability

AbnZ1, with optimal pH of 6.0 and optimal temperature of 40 °C, is a cold-adapted endo-1,5-α-L-arabinanase encoded by the gene abnZ1 from Paenibacillus polymyxa Z6. The specific activity of AbnZ1 remained 54.1% of maximum at 5 °C. To apply AbnZ1 in acidic conditions, three basic hsitidine (His) residues, His(48), His(218), and His(297), around the catalytic domain were selected as mutation sites, which were replaced with Asp, Glu, Arg, and Lys, respectively, to yield 12 mutants, H48D/E/R/K, H218D/E/R/K, and H297D/E/R/K. The optimum pH of mutant H218D shifted toward the acidic direction by 0.5 unit, and the relative activity was enhanced from 20.4 to 55.7% at pH 5.0. Furthermore, the specific activity of H218D in optimal conditions was 82.6 U/mg versus that of wild type, 73.4 U/mg, and the K(m) decreased from 11.9 to 7.1 mg/mL. This work provided an arabinanase candidate for juice clarification and pectin extraction.