Facile size-regulated synthesis of silver nanoparticles using pectin

Synthesis of sodium alginate grafted and silver nanoparticles filled anionic copolymer polyelectrolytes for adsorption and photocatalytic degradation of a cationic dye from water

Sodium alginate (SA) was grafted to poly (acrylonitrile-co‑sodium acrylate-co-acrylic acid). The grafted copolymer was crosslinked with N. N, methylene bis acrylamide (MBA). Silver nanoparticles (AgNPs) were generated in situ within the growing polymer network by reducing 0.1 mM silver nitrate with 0.05 mM ascorbic acid (ASA). The effect of initiator concentration, total monomer concentration, SA weight%, MBA weight% and acrylonitrile (AN):sodium acrylate (NaAA)/ acrylic acid (AA) molar ratios on the grafting were studied. The nanocomposite was characterized and used for adsorption of methylene blue (MB) dye from water. The composite was also used for photocatalytic degradation of the dye in the presence of sun light. The Box-Behnken design (BBD) of response surface methodology (RSM) with different compositions resulted in an optimized composition of 5:1 M ratio of AN:NaAA/AA, 1 wt% MBA and 2 wt% SA. The nanocomposite (SACP5Ag) prepared with the optimized composition showed an equilibrium batch adsorption(qe, mg/g)/removal(R)% of 245/98 from 50 mg/L MB dye in water and a qe /R% of 18.87/31.4 in a fixed bed adsorption at a feed inlet concentration(mgL-1)/inflow rate (mLmin-1)/bed height (mm) of 100/20/25. The composite showed a photocatalytic degradation efficiency of 98 % in sunlight for 80 min and a 1st order rate constant of 0.02 min-1.

Optimization of the physiochemical synthesis parameters of the Se/CMC nanocomposite: Antibacterial, antioxidant, and anticancer activity

Selenium nanoparticles (Se NPs) have gained growing significance due to their remarkable therapeutic qualities, decreased toxicity, enhanced bioavailability, and biocompatibility compared to other selenium compounds. Se NPs were synthesized using ascorbic acid (AA) and carboxymethyl cellulose (CMC) as reducing and capping agents, respectively. This was carried out by optimizing the physiochemical preparation parameters (e.g., precursor salt concentration, AA concentration, temperature, and pH). Characterization of the optimized Se/CMC nanocomposite sample was conducted using several techniques including UV-Vis spectroscopy, FT-IR, X-ray XRD, TEM, SEM, EDX, DLS, and Zeta potential. The UV-Vis spectra results indicate that the synthesized Se/CMC nanocomposite exhibits a most prominent surface plasmon resonance (SPR) peak at λmax = 270 nm. The diameter of the synthesized Se/CMC nanocomposite varied between 100 and 500 nm as observed in TEM images, and as verified by the DLS technique. Moreover, the Z-potential evaluated for the Se/CMC nanocomposite using the most optimal synthesis conditions was -21.8 ± 4.48 mV. The results obtained showed that Se/CMC nanocomposite had a more significant impact on Gram-negative clinical bacterial isolates (23 ± 0.97 mm) than Gram-positive (22 ± 0.95 mm). Additionally, the synthesized nanocomposite showed a highly antioxidant activity (83 %) of inhibition DPPH free radicals results using DPPH assay. Also, the fabricated Se/CMC nanocomposite has good anticancer activity (168 μg/mL) against the liver HepG2 cell line using MTT assay. Hence, the Se/CMC nanocomposite that was prepared has promising prospects in the field of healthcare owing to its enhanced capacity as an antioxidant, anticancer, and antibacterial agent.

Parsimonious methodology for synthesis of silver and copper functionalized cellulose

Metal nanomaterials, such as silver and copper, are often incorporated into commercial textiles to take advantage of their Antibacterial and antiviral properties. The goal of this study was to identify the most parsimonious method for the synthesis of silver, copper, or silver/copper bimetallic treated textiles. To accomplish this eight different methods were employed to synthesize silver, copper, and silver/copper functionalized cotton batting textiles. Using silver and copper nitrate as precursors, different reagents were used to initiate/catalyze the deposition of metal, including: (1) no additive, (2) sodium bicarbonate, (3) green tea, (4) sodium hydroxide, (5) ammonia, (6, 7) sodium hydroxide/ammonia at a 1:2 and 1:4 ratio, and (8) sodium borohydride. The use of sodium bicarbonate as a reagent to reduce silver onto cotton has not been used previously in literature and was compared to established methods. All synthesis methods were performed at 80 °C for one hour following textile addition to the solutions. The products were characterized by x-ray fluorescence (XRF) analysis for quantitative determination of the metal content and x-ray absorption near edge structure (XANES) analysis for silver and copper speciation on the textile. Scanning electron microscopy (SEM) with energy dispersive x-ray (EDX) and size distribution inductively coupled plasma mass spectrometry (ICP-MS) were used to further characterize the products of the sodium bicarbonate, sodium hydroxide, and sodium borohydride synthesis methods following ashing of the textile. For the silver treatment methods (1 mM Ag +), sodium bicarbonate and sodium hydroxide resulted in the highest amounts of silver on the textile (8900 mg Ag/kg textile and 7600 mg Ag/kg textile) and for copper treatment (1 mM Cu +) the sodium hydroxide and sodium hydroxide/ammonium hydroxide resulted in the highest amounts of copper on the textile (3800 mg Ag/kg textile and 2500 mg Ag/kg textile). Formation of copper oxide was dependent on the pH of the solution, with 4 mM ammonia and other high pH solutions resulting in majority of the copper on the textile existing as copper oxide, with smaller amounts of ionic-bound copper. The identified parsimonious methods will lend themselves to the efficient manufacturing of antibacterial and antiviral textiles, or the development of multifunctionalized smart textiles.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-023-05099-7.

Self-induced transformation of raw cotton to a nanostructured primary cell wall for a renewable antimicrobial surface

Herein, raw cotton is shown to undergo self-induced transformation into a nanostructured primary cell wall. This process generates a metal nanoparticle-mediated antimicrobial surface that is regenerable through multiple washings. Raw cotton, without being scoured and bleached, contains noncellulosic constituents including pectin, sugars, and hemicellulose in its primary cell wall. These noncellulosic components provide definitive active binding sites for the in situ synthesis of silver nanoparticles (Ag NPs). Facile heating in an aqueous solution of AgNO3 activated raw cotton to produce Ag NPs (ca. 28 nm in diameter and 2261 mg kg-1 in concentration). Compared with scoured and bleached cotton, raw cotton requires lower concentrations of AgNO3-ten times lower for Klebsiella pneumonia and two times lower for Staphylococcus aureus-to achieve 99.9% reductions of both Gram-positive and Gram-negative bacteria. The Ag NPs embedded in the primary cell wall, which was confirmed via transmission electron microscopy images of the fiber cross-sections, are immobilized, exhibiting resistance to leaching as judged by continuous laundering. A remarkable percentage (74%) of the total Ag NPs remained in the raw cotton after 50 laundering cycles.

Pectin-Coated Plasmonic Nanoparticles for Photodynamic Therapy: Inspecting the Role of Serum Proteins

Plasmonic metal nanoparticles (NPs) can be used as enhancers of the efficiency of standard photosensitizers (PSs) in photodynamic therapy (PDT). Protein corona, the adsorption layer that forms spontaneously around NPs once in contact with biological fluids, determines to a great extent the efficiency of PDT. In this work, we explore the possibility that pectin-coated Au NPs (Au@Pec NPs) could act as adjuvants in riboflavin (Rf)-based PDT by comparing the photodamage in HeLa cells cultured in the presence and in the absence of the NPs. Moreover, we investigate the impact that the preincubation of Rf and Au@Pec NPs (or Ag@Pec NPs) at two very different serum concentrations could have on cell's photodamage. Because reactive oxygen species (ROS) precursors are the excited states of the PS, the effect of proteins on the photophysics of Rf and Rf/plasmonic NPs was studied by transient absorption experiments. The beneficial effect of Au@Pec NPs in Rf-based PDT on HeLa cells cultured under standard serum conditions was demonstrated for the first time. However, the preincubation of Rf and Au@Pec NPs (or Ag@Pec NPs) with serum has undesirable results regarding the enhancement of Rf-based PDT. In this sense, we also verified that more concentrated protein conditions result in lower amounts of the triplet excited state of Rf and thus an expected lower production of ROS, which are the key elements for PDT's efficacy. These findings point out the relevance of serum concentration in the design of in vitro cell culture experiments carried out to determine the best way to combine and use potential sensitizers with plasmonic NPs to develop more effective PDTs.

Sunlight-Driven Synthesis of Silver Nanoparticles Using Pomelo Peel Extract and Antibacterial Testing

A green approach, including using phytochemicals in pomelo peel extract (PPE) and direct sunlight, was used to synthesize silver nanoparticles (AgNPs). PPE was prepared by treating pomelo peel with a citric acid solution at 85°C for 2 h. PPE was then mixed with AgNO3 and exposed to sunlight to induce the formation of AgNPs. Time-dependent UV-vis spectra of the reaction mixture demonstrated that AgNPs are formed under sunlight irradiation faster than underheating at 90°C. Characterization techniques, including X-ray diffraction, transmission electron microscopy, and scanning electron microscopy, confirmed the formation of AgNPs with sizes of 20–30 nm. AgNPs synthesized in PPE were more stable toward electrolyte-induced aggregation than those synthesized using the conventional NaBH4/citrate method. The AgNPs synthesized in PPE showed antibacterial activities comparable to those of AgNO3 at the same silver concentration against four pathogenic bacterial strains. The obtained PPE containing AgNPs, pectin, and other phytochemicals can be utilized further to produce antibacterial and antioxidant films in food packaging and medical applications.

Novel Ecogenic Plasmonic Biohybrids as Multifunctional Bioactive Coatings

The objective of the present study is the valorization of natural resources and the recycling of vegetal wastes by converting them into novel plasmonic bio-active hybrids. Thus, a “green” approach was used to design pectin-coated bio-nanosilver. Silver nanoparticles were generated from two common garden herbs (Mentha piperita and Amaranthus retroflexus), and pectin was extracted from lemon peels. The samples were characterized by the following methods: Ultraviolet–visible (UV-Vis) absorption spectroscopy, Fourier Transform Infrared (FT-IR), X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), dynamic light scattering (DLS), Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM)–Energy-dispersive X-ray Spectroscopy (EDX), and zeta potential measurements. Microscopic investigations revealed the spherical shape and the nano-scale size of the prepared biohybrids. Their bioperformances were checked in terms of antioxidant and antibacterial activity. The developed plasmonic materials exhibited a strong ability to scavenge short-life (96.1% ÷ 98.7%) and long-life (39.1% ÷ 91%) free radicals. Microbiological analyses demonstrated an impressive antibacterial effectiveness of pectin-based hybrids against Escherichia coli. The results are promising, and the obtained biomaterials could be used in many bio-applications, especially as antioxidant and antimicrobial biocoatings.

Green and efficient biosynthesis of pectin-based copper nanoparticles and their antimicrobial activities

Herein, we reported a green biosynthesis method of copper nanoparticles (CuNPs) at microwave irradiation condition by using pectin as a stabilizer and ascorbic acid as a reducing agent. Under the optimum conditions, CuNPs1 and 2 were synthesized under microwave times 0 and 3 min, respectively. Transmission electron microscope and scanning electron microscope (SEM) tests showed that CuNPs1 and 2 had irregular polygon particles with average diameters of 61.9 ± 19.4 and 40.9 ± 13.6 nm, respectively. Zeta potentials of CuNPs1 and 2 were -45.2 and -48.7 mV, respectively. X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy techniques were used to characterize the properties of CuNPs. Furthermore, inhibition zone tests showed that CuNPs2 exhibited higher antimicrobial activities against Escherichia coli, Staphylococcus aureus, and Aspergillus japonicus than CuNPs1. The antibacterial activities were also studied by the bacterial growth kinetics in broth media, and CuNPs2 exhibited lower minimum bactericidal concentrations than CuNPs1.

Metal-dependent nano-catalysis in reduction of aromatic pollutants

Nanostructures have great potential in catalysis and their compositions may cause some interferences in the reactivity. Therefore, the present study focuses on comparison between three metallic nanoparticle-based Ag, Au, and Pd as nano-catalyst in reduction of aromatic pollutants. To neglect any interpenetration in their catalytic reactivity, the metallic nanoparticles were prepared via a consistent and reproducible one-step method with alkali-activated dextran. Interestingly, small sized/spherical AgNPs, AuNPs, and PdNPs were successively prepared with particle size of 3.4, 8.3, and 17.1 nm, respectively. The catalytic performance of the synthesized NPs was estimated for the reduction of p-nitroaniline and methyl red dye as different aromatic pollutants. Regardless of the particle size, there was a strong relation between catalytic action and the type of metal which followed the order of PdNP > AuNPs > AgNPs. Graphical Abstract.

Antioxidants and Nanotechnology: Promises and Limits of Potentially Disruptive Approaches in the Treatment of Central Nervous System Diseases

Many central nervous system (CNS) diseases are still incurable and only symptomatic treatments are available. Oxidative stress is suggested to be a common hallmark, being able to cause and exacerbate the neuronal cell dysfunctions at the basis of these pathologies, such as mitochondrial impairments, accumulation of misfolded proteins, cell membrane damages, and apoptosis induction. Several antioxidant compounds are tested as potential countermeasures for CNS disorders, but their efficacy is often hindered by the loss of antioxidant properties due to enzymatic degradation, low bioavailability, poor water solubility, and insufficient blood-brain barrier crossing efficiency. To overcome the limitations of antioxidant molecules, exploitation of nanostructures, either for their delivery or with inherent antioxidant properties, is proposed. In this review, after a brief discussion concerning the role of the blood-brain barrier in the CNS and the involvement of oxidative stress in some neurodegenerative diseases, the most interesting research concerning the use of nano-antioxidants is introduced and discussed, focusing on the synthesis procedures, functionalization strategies, in vitro and in vivo tests, and on recent clinical trials.

Alginate based tamoxifen/metal dual core-folate decorated shell: Nanocomposite targeted therapy for breast cancer via ROS-driven NF-κB pathway modulation

Breast cancer endocrine resistance prevents unleashing full capabilities of Tamoxifen (TMX), besides TMX off-target side effects on healthy tissue. In this study, we engineered TMX nanocomposite via co-loading it on alginate-based silver nanoparticles and embedding within folic acid-polyethylene glycol surface conjugate. The coating process was done by w/o/w double emulsion method. To confirm the silver nanoparticles formation, UV spectroscopy, XRD and TEM analysis were carried out. TEM results confirmed the core-shell structure of folate targeted nanocomposite with approximate average diameter of 66 nm, the nanocomposite structures were characterized by FTIR, TGA and SEM. By comparing with the non-targeted formula, folate decorated formula had 12-folds lowered IC₅₀ value and 12.5-14-fold higher cancer cells toxic selectivity index. Also, after 4 h treatment, both fluorescence microscopic and flow cytometric analysis indicated higher intracellular accumulation of folic acid conjugated formula on MCF-7 cancer cells than the non-targeted one with 3.44-folds. The breast cancer cytotoxic effects of this metal-endocrine nanocomposite formula could be explained by the induction of reactive oxygen species (ROS), down regulation of survival oncogenic genes (BCL-2 and Survivin) and the accumulation of MCF-7 cells in G2/M phase. All these data confirm the efficiency and efficacy of the formulated nanocomposite as future treatment for breast cancer.

New pectin-induced green fabrication of Ag@AgCl/ZnO nanocomposites for visible-light triggered antibacterial activity

The pectin (CEP) was used as matrix material to prepare Ag@AgCl/ZnO nanocomposites with a green method for photocatalytic antibacterial activity in visible-light. Briefly, Ag@AgCl plasmonic hybrids were prepared in the CEP macromolecule matrix with size control, which was attributed to the stability of carboxyl and hydroxyl groups on the CEP. Subsequently, an effective and green two-steps approach was explored for the fabrication of CEP-Ag@AgCl/ZnO nanocomposites with resource saving and environment friendly. Interestingly, more Ag⁺ was converted into metallic Ag in the CEP-Ag@AgCl/ZnO than that in the CEP-Ag@AgCl. This phenomenon was attributed that the reducibility of free hemiacetal hydroxyl groups on CEP was realized with the help of NaOH in the preparation of CEP-ZnO. In addition, the CEP chains were not obviously destroyed except for the change in the crystallinity after the preparation of the CEP-Ag@AgCl/ZnO nanocomposites, indicating that the method was non-destructive. Moreover, the pH triggered release of Zn²⁺ and low release of Ag⁺ in CEP-Ag@AgCl/ZnO nanocomposites with excellent photocatalytic antibacterial activity were confirmed in this work. The proposed green process provides a new idea for the large-scale production of antibacterial pectin-based nanocomposites in industry with a low-cost.

Construction, stability, and enhanced antioxidant activity of pectin-decorated selenium nanoparticles

Selenium nanoparticles (SeNPs) as a new replacement source of other Se forms applied in nutritional supplements have been associated with health-related issues. Pectin (PEC) as a well-known food-grade polysaccharide has been considered as a potential soft template for the preparation and stabilization of SeNPs in aqueous medium. In this study, therefore, PEC was used as a stabilizer and dispersing agent to form well-dispersed and stable SeNPs under a simple redox system of selenite and ascorbic acid. Se/PEC ratios significantly affected the color of the suspension, particle size, and surface morphology of the as-prepared SeNPs in the presence of PEC. PEC-SeNPs with a Se/PEC ratio of 1:2 appeared amorphous and exhibited a well-dispersed and stable spherical structure with an average size of ∼41 nm, which corresponds to the strong hydrogen bonding between the hydroxyl groups of PEC and SeNPs. The PEC-SeNPs (Se/PEC = 1:2) remained highly stable in different acidic solutions for at least 1 month. Small and highly stable PEC-SeNPs (Se/PEC = 1:2) possessed the strongest DPPH radical scavenging ability and antioxidant capacity among the evaluated PEC-SeNPs. They also possessed a low cytotoxic activity against cancer cells (SPCA-1 and HeLa) and normal cells (RWPE-1) in vitro. These findings suggested that pectin as a surface decorator could be effectively used to improve the stability and antioxidant capacity of SeNPs remarkably.

New insights on the green synthesis of metallic nanoparticles using plant and waste biomaterials: current knowledge, their agricultural and environmental applications

Nanotechnology is a rapidly growing scientific field and has attracted a great interest over the last few years because of its abundant applications. Green nanotechnology is a multidisciplinary field that has emerged as a rapidly developing research area, serving as an important technique that emphasize on making the procedure which are clean, non-hazardous, and especially environmentally friendly, in contrast with chemical and physical methods currently employed for nanosynthesis. The biogenic routes could be termed green as these do not involve the use of highly toxic chemicals or elevated energy inputs during the synthesis. Differences in the bio-reducing agents employed for nanosynthesis can lead to the production of nanoparticles (NPs) having distinct shapes, sizes, and bioactivity. The exquitiveness of the green fabricated NPs have capacitated their potential applications in various sectors such as biomedicine, pharmacology, food science, agriculture, and environmental engineering. The present review summarizes current knowledge on various biogenic synthesis methods, relying on plants, waste biomass, and biopolymers and their reducing and stabilizing agents to fabricate nanomaterials. The main emphasis has been given on the current status and future challenges related to the wide-scale fabrication of nanoparticles for environmental remediation, pathogenicity, and agricultural applications.

Green synthesis of sodium alginate-silver nanoparticles and their antibacterial activity

Silver nanoparticles (AgNPs) were synthesized by a new 'green chemistry' method that uses sodium alginate (Na-Alg) and ascorbic acid (Vc) as the stabilizing and reducing agents, respectively. A possible mechanism involved in the reduction and stabilization of nanoparticles was investigated. The effect of reaction conditions such as pH, the addition of AgNO₃ and Vc, ultrasonication treatments on the synthesis of AgNPs was investigated. The formation of AgNPs was confirmed by UV-Vis spectroscopy and characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The results indicated that the size and distribution of AgNPs were significantly affected by reaction parameters. XRD and TEM analysis confirmed the formation of spherical and face-centred cubic nanoparticles. They showed strong antibacterial activity against Staphylococcus aureus and Escherichia coli due to cell death caused by the increase in membrane permeability and disruption of bacterial wall integrity. It indicated that Na-Alg-AgNPs is a potential food packaging material.

Plant extracts as green reductants for the synthesis of silver nanoparticles: lessons from chemical synthesis

From conventional synthesis to green transformations: a brief literature overview and insight for the synthesis of Ag nanoparticles.

One-step green approach for functional printing and finishing of textiles using silver and gold NPs

In this study, we present a successful simple method for printing and finishing of polyester and cotton fabrics using gold and silver nanoparticles (Au-NPs and Ag-NPs, respectively) as stable, fast colorants and functional components. The surface plasmon resonance (SPR) bands of the colloidal gold and silver NPs were observed at λ_max 520 nm and 450 nm, respectively, indicating the presence of spherical Au-NPs and Ag-NPs, which was further confirmed by TEM analysis. The printed samples were subjected to SEM, XRD and EDX analyses. The SEM images and EDX spectra unequivocally confirmed the existence of embedded NPs on the fabric surfaces. Both the cotton and polyester samples possessed excellent color fastness, as indicated from the color fastness test. The functional properties of the printed fabrics indicated that the incorporation of Au-NPs and Ag-NPs into the fabrics simultaneously imparted multifunctional properties such as stable brilliant colors, highly durable antimicrobial activity and very good UV-protection properties.

In this study, we present a successful simple method for printing and finishing of polyester and cotton fabrics using gold and silver nanoparticles (Au-NPs and Ag-NPs, respectively) as stable, fast colorants and functional components.

Crystallization and Colloidal Stabilization of Ca(OH)2 in the Presence of Nopal Juice (Opuntia ficus indica): Implications in Architectural Heritage Conservation

Hydrated lime (Ca(OH)₂) is a vernacular art and building material produced following slaking of CaO in water. If excess water is used, a slurry, called lime putty, forms, which has been the preferred craftsman selection for formulating lime mortars since Roman times. A variety of natural additives were traditionally added to the lime putty to improve its quality. The mucilaginous juice extracted from nopal cladodes has been and still is used as additive incorporated in the slaking water for formulation of lime mortars and plasters, both in ancient Mesoamerica and in the USA Southwest. Little is known on the ultimate effects of this additive on the crystallization and microstructure of hydrated lime. Here, we show that significant changes in habit and size of portlandite crystals occur following slaking in the presence of nopal juice as well as compositionally similar citrus pectin. Both additives contain polysaccharides made up of galacturonic acid and neutral sugar residues. The carboxyl (and hydroxyl) functional groups present in these residues and in their alkaline degradation byproducts, which are deprotonated at the high pH (12.4) produced during lime slaking, strongly interact with newly formed Ca(OH)₂ crystals acting in two ways: (a) as nucleation inhibitors, promoting the formation of nanosized crystals, and (b) as habit modifiers, favoring the development of planar habit following their adsorption onto positively charged (0001)_Ca(OH)2 faces. Adsorption of polysaccharides on Ca(OH)₂ crystals prevents the development of large particles, resulting in a very reactive, nanosized portlandite slurry. It also promotes steric stabilization, which limits aggregation, thus enhancing the colloidal nature of the lime putty. Overall, these effects are very favorable for the preparation of highly plastic lime mortars with enhanced properties.

In-situ deposition of Cu2O micro-needles for biologically active textiles and their release properties

Metal/metal oxide containing fibres are gradually increasing in textile industrialization recently, owing to their high potential for application as antimicrobial textiles. In this study, the reducing properties of cellulose were applied to synthesize cuprous oxide in-situ. The direct formation of Cu₂O on viscose fabrics was achieved via quite simple technique in two subsequent steps: alkalization and sorption. Cu contents in fabrics before and after rinsing ranged between 45.2-86.4mmol/kg and 18.1-67.7mmol/kg, respectively. Uniform micro-needles of Cu₂O were obtained with regular size and dimensions of 1.60±0.20μm in length and 0.13±0.03μm in width. Release of Cu^1+/2+ ions from selected samples was studied in water, physiological fluid and artificial sweat. Copper containing fabrics exhibited a percent of 96.8-97.8% and 85.5-89.0% for reduction in microbial viability, which was tested for S. aureus (as gram positive bacteria), E. coli (as gram-negative bacteria) and C. albicans and A. niger (as fungal species), respectively after 24h contact time.

Templated green synthesis of plasmonic silver nanoparticles in onion epidermal cells suitable for surface-enhanced Raman and hyper-Raman scattering

We report fast and simple green synthesis of plasmonic silver nanoparticles in the epidermal cells of onions after incubation with AgNO3 solution. The biological environment supports the generation of silver nanostructures in two ways. The plant tissue delivers reducing chemicals for the initial formation of small silver clusters and their following conversion to plasmonic particles. Additionally, the natural morphological structures of the onion layers, in particular the extracellular matrix provides a biological template for the growth of plasmonic nanostructures. This is indicated by red glowing images of extracellular spaces in dark field microscopy of onion layers a few hours after AgNO3 exposure due to the formation of silver nanoparticles. Silver nanostructures generated in the extracellular space of onion layers and within the epidermal cell walls can serve as enhancing plasmonic structures for one- and two-photon-excited spectroscopy such as surface enhanced Raman scattering (SERS) and surface enhanced hyper-Raman scattering (SEHRS). Our studies demonstrate a templated green preparation of enhancing plasmonic nanoparticles and suggest a new route to deliver silver nanoparticles as basic building blocks of plasmonic nanosensors to plants by the uptake of solutions of metal salts.

Bio-therapeutic Potential and Cytotoxicity Assessment of Pectin-Mediated Synthesized Nanostructured Cerium Oxide

In the present studies, renewable and nontoxic biopolymer, pectin, was extracted from Indian red pomelo fruit peels and used for the synthesis of cerium oxide nanoparticles (CeO₂-NPs) having bio-therapeutic potential. The structural information of extracted pectin was investigated by FTIR and NMR spectroscopic techniques. Physicochemical characteristics of this pectin suggested its application in the synthesis of metal oxide nanoparticles. Using this pectin as a template, CeO₂-NPs were synthesized by simple, one step and eco-friendly approach. The UV-Vis spectrum of synthesized CeO₂-NPs exhibited a characteristic absorption peak at wavelength 345 nm, which can be assigned to its intrinsic band gap (3.59 eV) absorption. Photoluminescence measurements of CeO₂-NPs revealed that the broad emission was composed of seven different bands. FTIR analysis ensured involvement of pectin in the formation and stabilization of CeO₂-NPs. FT-Raman spectra showed a sharp Raman active mode peak at 461.8 cm^-1 due to a symmetrical stretching mode of Ce-O vibration. DLS, FESEM, EDX, and XRD analysis showed that the CeO₂-NPs prepared were polydispersed, spherical shaped with a cubic fluorite structure and average particle size ≤40 nm. These CeO₂-NPs displayed broad spectrum antimicrobial activity, antioxidant potential, and non-cytotoxic nature.

Green-assisted tool for nanogold synthesis based on alginate as a biological macromolecule

Large-scale biomedical applications of nanogold reflect the challenge faced by recent researches in the investigation of green synthesis methodologies, which are mostly complicated and/or expensive processes.

Highly poison-resistant Pt nanocrystals on 3D graphene toward efficient methanol oxidation

Highly poison-resistant Pt nanocrystals are synthesized using reductive sugars derived from pectin hydrolysis, showing efficient catalytic performance toward methanol oxidation.

Functional Application of Noble Metal Nanoparticles In Situ Synthesized on Ramie Fibers

Different functions were imparted to ramie fibers through treatment with noble metal nanoparticles including silver and gold nanoparticles. The in situ synthesis of silver and gold nanoparticles was achieved by heating in the presence of ramie fibers in the corresponding solutions of precursors. The unique optical property of synthesized noble metal nanoparticles, i.e., localized surface plasmon resonance, endowed ramie fibers with bright colors. Color strength (K/S) of fibers increased with heating temperature. Silver nanoparticles were obtained in alkaline solution, while acidic condition was conducive to gold nanoparticles. The optical properties of treated ramie fibers were investigated using UV-vis absorption spectroscopy. Scanning electron microscopy (SEM) was employed to observe the morphologies of silver and gold nanoparticles in situ synthesized on fibers. The ramie fibers treated with noble metal nanoparticles showed remarkable catalytic activity for reduction of 4-nitrophenol (4-NP) by sodium borohydride. Moreover, the silver nanoparticle treatment showed significant antibacterial property on ramie fibers.

Facile Precursor for Synthesis of Silver Nanoparticles Using Alkali Treated Maize Starch

Silver nanoparticles were prepared by using alkali treated maize starch which plays a dual role as reducer for AgNO3 and stabilizer for the produced AgNPs. The redox reaction which takes a place between AgNO3 and alkali treated starch was followed up and controlled in order to obtain spherical shaped silver nanoparticles with mean size 4-6 nm. The redox potentials confirmed the principle role of alkali treatment in increasing the reducibility of starch macromolecules. The measurements of reducing sugars at the end of reaction using dinitrosalicylic acid reagent (DNS) were carried out in order to control the chemical reduction reaction. The UV/Vis spectra show that an absorption peak, occurring due to surface plasmon resonance (SPR), exists at 410 nm, which is characteristic to yellow color of silver nanoparticles solution. The samples have been characterized by transmission electron microscopy (TEM), which reveal the nanonature of the particles.