Production of starch nanoparticles by dissolution and non-solvent precipitation for use in food-grade Pickering emulsions

Multiple Pickering emulsions stabilized by food-grade particles as innovative delivery systems for bioactive compounds

The most common carrier for encapsulation of bioactive components is still simple emulsion. Recently, bio-based novel emulsion systems such as multiple emulsions (MEs) and Pickering emulsions (PEs) have been introduced as innovative colloidal delivery systems for encapsulation and controlled release of bioactive compounds. Multiple PEs (MPEs), which carries both benefit of MEs and PEs could be fabricated by relatively scalable and simple operations. In comparison with costly synthetic surfactants and inorganic particles which are widely used for stabilization of both MEs and PEs, MPEs stabilized by food-grade particles, while having health-promoting aspects, are able to host the "clean label" and "green label" attributes. Nevertheless, in achieving qualified techno-functional attributes and encapsulation properties, the selection of suitable materials is a crucial step in the construction of such complex systems. Current review takes a cue from both MEs and PEs emulsification techniques to grant a robust background for designing various MPEs. Herein, various fabrication methods of MEs and PEs are described comprehensively in a physical viewpoint in order to find key conception of successful formulation of MPEs. This review also highlights the link between the underlying aspects and exemplified specimens of evidence which grant insights into the rational design of MPEs through food-based ingredients to introduces MPEs as novel colloidal/functional materials. Their utilization for encapsulation of bioactive compounds is discussed as well. In the last part, instability behavior of MPEs under various conditions will be discussed. In sum, this review aims to gain researchers who work with food-based components, basics of innovative design of MPEs.

Starch-based particles as stabilizers for Pickering emulsions: modification, characteristics, stabilization, and applications

The potential utilization of starch as a particle-based emulsifier in the preparation of Pickering emulsions is gaining interest within the food industry. Starch is an affordable and abundant functional ingredient, which makes it an excellent candidate for the stabilization of Pickering emulsions. This review article focuses on the formation, stabilization, and properties of Pickering emulsions formulated using starch-based particles and their derivatives. First, methods of isolating and modifying starch-based particles are highlighted. The key parameters governing the properties of starch-stabilized Pickering emulsions are then discussed, including the concentration, size, morphology, charge, and wettability of the starch-based particles, as well as the type and size of the oil droplets. The physicochemical mechanisms underlying the ability of starch-based particles to form and stabilize Pickering emulsions are also discussed. Starch-based Pickering emulsions tend to be more resistant to coalescence than conventional emulsions, which is useful for some food applications. Potential applications of starch-stabilized Pickering emulsions are reviewed, as well as recent studies on their gastrointestinal fate. The information provided may stimulate the utilization of starch-based Pickering emulsions in food and other industries.

Sequencing analysis and efficient biodiesel production by lipase from Pseudomonas aeruginosa

BACKGROUND

Recently, lipase processing for biodiesel production has shown a global increase as it is considered a potential alternative clean-fuel source. The current study's objective is to investigate of lipolytic activity of lipase produced from different strains of Pseudomonas aeruginosa (P. aeruginosa) in biodiesel production using edible plant oils. The goal is to develop an efficient and cost-effective method for producing inexpensive and environmentally friendly biodiesel.

METHODS AND RESULTS

Four P. aeruginosa isolates were obtained from different environmental sources (soil), phenotypically identified, and it was confirmed by the PCR detection of the 16SrRNA gene. The isolated P. aeruginosa strains were screened for lipase production, and the recovered lipase was purified. Besides, the lipase (lip) gene was detected by PCR, and the purified PCR products were sequenced and analyzed. The production of biofuel was conducted using gas chromatography among tested oils. It was found that castor oil was the best one that enhances lipase production in-vitro.

Preparation and characterization of fine and stable short amylose nanocarriers for curcumin using a highly efficient and convenient method

To prepare fine and stable nanocarriers for curcumin using a highly efficient and convenient method, nanoprecipitation combined with ultrasonication and a high-speed dispersion (US+HSS) method were used to prepare short amylose nanoparticles with pre-formed helical structures. Their morphology, structural characteristics, and embedding effects for curcumin were investigated. The results showed that the optimal ratio of ethanol to short amylose solution and ultrasonic time was 4:1 and 4 min, respectively. The nanoparticles showed a small size (82.43 nm), relatively high loading capacity (11.57 %), and a peak gelatinization temperature of 97.74 °C. Compared to the nanoprecipitation method, the short amylose nanoparticles prepared using the US+HSS method possessed a higher V-type crystalline structure ratio. In addition, the US+HSS method was easier to use to prepare nanoparticles with high stability against NaCl, and the stable nanoparticles showed the best in vitro sustained release effect for curcumin. The Peppas-Sahlin model was the optimal model that matched curcumin release from nanoparticles during digestion.

Short-chain glucan self-assembly for green synthesis of functional biomaterials: Mechanism, synthesis, and microstructural control

Short-chain glucan (SCG) is a linear homopolymer containing 10 to 50 glucose units linked with α(1,4) glycosidic bonds. With its abundant, low-cost, nontoxic, biodegradable/biocompatible nature, self-assembled SCG particles (SSC) have emerged as functional biomaterials, which have recently attracted tremendous attentions in various fields. SCG self-assembly occurs through the spontaneous association of molecules under equilibrium conditions into stable and structurally well-defined nanoscale or micrometer-scale aggregates, which is governed by various intermolecular non-covalent interactions, including hydrogen-bonding, electrostatic, hydrophobic, and van der Waals. With precise and effective control of the self-assembly process of SSC, its structural modulation and function integration can be expected. Thus, we convinced that SCG self-assembly could provide an effective means of developing starch-based functional biomaterials with beneficial health properties and wide application in food industries. In this review, we provide an overview of recent advances in the green approach for the self-assembly of SSC, as well as the influence of thermodynamic and kinetic factors on its morphology and physicochemical properties. We highlight recent contributions to developing strategies for the construction of SSC with increasing complexity and functionality that are suitable for a variety of food applications. Finally, we briefly outline our perspectives and discuss the challenges in the field.

Cannabidiol-Loaded Nanoparticles Based on Crosslinked Starch: Anti-Inflammatory Activity and Improved Nose-to-Brain Delivery

Cannabidiol (CBD) has previously been shown to inhibit inflammatory cytokine production in both in vitro and in vivo studies of neurodegenerative diseases. To date, the CBD treatment of these diseases by quantitative targeting directly to the brain is one of the greatest challenges. In this paper, we present a new particulate system capable of delivering CBD into the brain via the intranasal route. Intranasal administration of CBD-loaded starch nanoparticles resulted in higher levels of cannabidiol in the brain compared to an identically administered cannabidiol solution. The production and the characterization of starch-based nanoparticles was reported, as well as the evaluation of their penetration and anti-inflammatory activity in cells. Cannabidiol-loaded starch nanoparticles were prepared by crosslinking with divanillin, using the nanoprecipitation method. Evaluation of the anti-inflammatory activity in vitro was performed using the BV2 microglia cell line. The starch nanoparticles appeared under electron microscopy in clusters sized approximately 200 nm in diameter. In cultures of lipopolysaccharide-induced inflamed BV2 cells, the cannabidiol-loaded starch nanoparticles demonstrated low toxicity while effectively reducing nitric oxide production and IL-6 levels. The anti-inflammatory effect was comparable to that of a glucocorticoid. Starch-based nanoparticle formulations combined with intranasal administration may provide a suitable platform for efficacious cannabidiol delivery and activity in the central nervous system.

Starch physical treatment, emulsion formation, stability, and their applications

Pickering emulsions are increasingly preferred over typical surfactant-based emulsions due to several advantages, such as lower emulsifier usage, simplicity, biocompatibility, and safety. These types of emulsions are stabilized using solid particles, which produce a thick layer at the oil-water interface preventing droplets from aggregating. Starch nano-particles (SNPs) have received considerable attention as natural alternatives to synthetic stabilizers due to their unique properties. Physical formulation processes are currently preferred for SNP production since they are environmentally friendly procedures that do not require the use of chemical reagents. This review provides a thorough overview in a critical perspective of the physical processes to produce starch nano-particles used as Pickering emulsion stabilizers, fabricated by a 2-step process. Specifically, the reviewed physical approaches for nano-starch preparation include high hydrostatic pressure, high pressure homogenization, ultrasonication, milling and antisolvent precipitation. All the essential parameters used to evaluate the effectiveness of particles in stabilizing these systems are also presented in detail, including the hydrophobicity, size, and content of starch particles. Finally, this review provides the basis for future research focusing on physical nano-starch production, to ensure the widespread use of these natural stabilizers in the ever-evolving field of food technology.

Synthesis of controlled-size starch nanoparticles and superparamagnetic starch nanocomposites by microemulsion method

In this study, a synthesis process based on the microemulsion method (ME) was developed with the aim to produce controlled-size starch nanoparticles (SNPs). Several formulations were tested for the preparation of the W/O microemulsions varying the organic/aqueous phase ratios and co-stabilizers concentrations. SNPs were characterized in terms of size, morphology, monodispersity and crystallinity. Spherical shape particles with mean sizes 30-40 nm were prepared. The method was then used to simultaneously synthesize SNPs and iron oxide nanoparticles with superparamagnetic properties. Starch-based nanocomposites with superparamagnetic properties and controlled size were obtained. Therefore, the microemulsion method developed could be considered an innovative technology for the design and development of novel functional nanomaterials. The starch-based nanocomposites were evaluated in terms of morphology and magnetic properties, and they are being considered as promising sustainable nanomaterials for different biomedical applications.

Improvement of structural, physicochemical, and rheological properties of porcine myofibrillar proteins by high-intensity ultrasound treatment for application as Pickering stabilizers

This study aimed to evaluate the potential of time-dependent (0, 15, 30, 60, 120 min) treatment of porcine-derived myofibrillar proteins (MPs) with high-intensity ultrasound (HIU) for utilizing them as a Pickering stabilizer and decipher the underlying mechanism by which HIU treatment increases the emulsification and dispersion stability of MPs. To accomplish this, we analyzed the structural, physicochemical, and rheological properties of the HIU-treated MPs. Myosin heavy chain and actin were observed to be denatured, and the particle size of MPs decreased from 3,342.7 nm for the control group to 153.9 nm for 120 min HIU-treated MPs. Fourier-transformed infrared spectroscopy and circular dichroism spectroscopy confirmed that as the HIU treatment time increased, α-helical content increased, and β-sheet decreased, indicating that the protein secondary/tertiary structure was modified. In addition, the turbidity, apparent viscosity, and viscoelastic properties of the HIU-treated MP solution were decreased compared to the control, while the surface hydrophobicity was significantly increased. Analyses of the emulsification properties of the Pickering emulsions prepared using time-dependent HIU-treated MPs revealed that the emulsion activity index and emulsion stability index of HIU-treated MP were improved. Confocal laser scanning microscopy images indicated that small spherical droplets adsorbed with MPs were formed by HIU treatment and that dispersion stabilities were improved because the Turbiscan stability index of the HIU-treated group was lower than that of the control group. These findings could be used as supporting data for the utilizing porcine-derived MPs, which have been treated with HIU for appropriate time periods, as Pickering stabilizers.

Pickering emulsion stabilized by composite-modified waxy corn starch particles

The starch-based Pickering stabilizer has attracted more research interest recently, however, its application in food system is limited due to the low digestibility of raw starch particles. In this study, waxy corn starches were modified with octenyl succinic anhydride and then treated by dry heating at 180 °C for 20-60 min. Pickering emulsions stabilized by the composite-modified starch particles were fabricated, the physical stability, rheology property and microstructure of the emulsions were investigated. The results showed that the composite-modified starches maintained granule structure, their gelatinization temperatures and enthalpy significantly reduced after heat treatment (p < 0.05). Compared with native starch, the composite-modified starches had bigger three-phase contact angles and higher in vitro digestibility, while the relative crystallinity decreased from 32.46% to 24.87%. Pickering emulsions stabilized by composite-modified starch particles had long-term stability up to 300 days. The rheology results showed that all emulsions exhibited pseudoplastic behaviors and had higher storage modulus than loss modulus. Moreover, the viscosities decreased when the starch was roasted for 40 and 60 min. The composite-modified starch particles and few starch macromolecules at oil-water interface stabilized the emulsions collectively. These results provide a new strategy for designing an edible Pickering stabilizer.

Stabilization of Pickering emulsion using tragacanth nanoparticles produced by a combination of ultrasonic and anti-solvent methods

BACKGROUND

Because of the high surface/volume ratio in nanometric size particles, they exhibit novel functional properties in many industries, such as emulsion stabilization. Tragacanth nanoparticles (TNPs) were prepared in this research, applying intense ultrasound energy followed by anti-solvent precipitation in ethanol.

RESULTS

Investigation of wettability showed a contact angle of 88.9 ± 1.7° for TNPs, providing partial wetting of the nanoparticles at the oil-water interface. Pickering emulsions were prepared using TNPs at different oil contents. Also, emulsions containing tragacanth gum solution were prepared as control emulsions. Results showed that the viscosity of the emulsions prepared by the TNPs was significantly lower than those of the control emulsions. Microscopic images showed that the size of the emulsion droplets decreased by increasing the nanoparticle concentrations. Evaluation of the stability of the emulsions showed that changes in the average diameter of the emulsion droplets stabilized by nanoparticles were not significant after 1 month of storage at room temperature. In contrast, the size of the droplet of control emulsions increased over the 30 days of storage. Thermal and mechanical stresses confirmed the effect of the concentration of TNPs and the oil ratio on the stability of the emulsions.

CONCLUSION

The use of TNPs as a natural biopolymer is a promising approach in emulsion systems to prevent coalescence and increase the stability of the Pickering emulsions. © 2021 Society of Chemical Industry.

Ferulic acid loaded pickering emulsions stabilized by resistant starch nanoparticles using ultrasonication: Characterization, in vitro release and nutraceutical potential

The use of starch based nanoparticles have gained momentum in stabilizing pickering emulsions for it's numerous advantages. In present study resistant starch (RS) was isolated from lotus stem using enzymatic digestion and subjected to nanoprecipitation and ultrasonication to yield resistant starch nanoparticles (RSN). RSN of varying concentrations (2%, 10% and 20%) were used to stabilize the flax seed-oil water mixture to form pickering emulsions. The emulsions were used to nanoencapsulate ferulic acid (FA) - a well known bioactive via ultrasonication. The emulsions were lyophilized to form FA loaded lyophilized pickering emulsion (FA-LPE). The FA-LPE (2%, 10 % and 20%) were characterized using dynamic light scattering (DLS), light microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and attenuated total reflectance fourier transform infra-spectroscopy (ATR-FTIR). AFM showed FA-LPE as spherical droplets embedded in the matrix with maximum peak height of 8.47 nm and maximum pit height of 1.69 nm. SEM presented FA-LPE as an irregular and continuous surface having multiple folds and holes. The ATR-FTIR spectra of all the samples displayed peaks of C = C aromatic rings of FA at 1600 cm^-1 and 1439 cm^-1, signifying successful encapsulation. In vitro release assay displayed more controlled release of FA from FA-LPE (20%). Bioactivity of FA-LPE was evaluated in terms of anti-cancer, anti-diabetic, angiotensin converting enzyme (ACE) inhibition and prevention against oxidative damage under simulated gastro-intestinal conditions (SGID). The bioactivity of FA-LPE (20%) was significantly higher than FA-LPE (2%) and FA-LPE (10%). Key findings reveal that pickering emulsions can prevent FA under harsh SGID conditions and provide an approach to facilitate the design of pickering emulsions with high stability for nutraceutical delivery in food and supplement products.

Effect of combination of ultrasonic treatment and anti-solvent methods as a high-efficiency method of nanoparticle production on the tragacanth gum properties

Gum tragacanth nanoparticles were prepared using a combination of intense ultrasound energy and anti-solvent precipitation methods in this research. Results showed that smaller particles were produced by increasing sonication time. As well, increasing the sonication power led to smaller particles, however, increased aggregation. Accordingly, tragacanth solutions with 0.5 and 1% (w/v) concentrations were prepared and mixed with ethanol (ratio 1:10 v/v) after ultrasound treatment with two different drop-wise and direct methods to investigate the effect of anti-solvent addition method on the precipitation of tragacanth particles. The nanoparticle images showed that the concentration of the 0.5% tragacanth solution and the direct mixing method was suitable for particle production with desirable size (72 ± 10 nm) and uniformity. FTIR, XRD, and STA studies showed that the tragacanth chemical composition did not change, and only its particle size decreased. Investigation of wettability showed a contact angle of 88.9 ± 1.7 degrees for nanoparticles providing partial wetting of the particles at the interface. Investigation of the solution viscosities of 0.5% tragacanth gum and tragacanth nanoparticles showed that the viscosity of the nanoparticles solution was significantly lower than that of the tragacanth (p < 0.05) indicating the intense effect of ultrasonication on this property. It can be concluded that the high viscosity of tragacanth gum is not due to its chemical composition but is due to its complex structure.

The application of gelatinisation techniques in modification of cassava and yam starches using precipitation method

Starches modified using the precipitation method which are added to edible film formulation were shown to lower water vapor transmission rates and increase the mechanical strength of the film. The effect may not only be due to the changes in starch morphology, but other aspects of the starch granules, such as their size and chemical properties in particular, are also suggested as reasons for improvements to the quality of edible film by modified starches. The aim of this research was to determine physicochemical changes in modified cassava and yam starches using several gelatinisation techniques in the precipitation method. The gelatinisation techniques used in this study were two methods of heating (using a hotplate and autoclave reactor + oven heating) and two types of starch solvent (distilled water and a mixture of distilled water and ethanol 1:1, v/v). The results showed that both cassava and yam starch granules modified using a hotplate at a heating temperature of 100 °C for 30 min were more badly damaged and smaller than those modified using autoclave reactor + oven heating at 140 °C for 1 h. However, the latter suffered more damage and were smaller in size when the heating time was increased to 3-5 h. All techniques applied in the modification increased the intensities of stretching vibration of O-H and C-H, and bound water bending vibration. The use of ethanol in the starch solvent enabled the starches to retain the shape and size of the granules despite the rearrangement of intra and intermolecular bonding as confirmed by FTIR spectra.

Recent progress in Pickering emulsions stabilised by bioderived particles

In recent years, the demand for non-surfactant based Pickering emulsions in many industrial applications has grown significantly because of the option to select biodegradable and sustainable materials with low toxicity as emulsion stabilisers. Usually, emulsions are a dispersion system, where synthetic surfactants or macromolecules stabilise two immiscible phases (typically water and oil phases) to prevent coalescence. However, synthetic surfactants are not always a suitable choice in some applications, especially in pharmaceuticals, food and cosmetics, due to toxicity and lack of compatibility and biodegradability. Therefore, this review reports recent literature (2018-2021) on the use of comparatively safer biodegradable polysaccharide particles, proteins, lipids and combinations of these species in various Pickering emulsion formulations. Also, an overview of the various tuneable factors associated with the functionalisation or surface modification of these solid particles, that govern the stability of the Pickering emulsions is provided.

Pickering emulsifiers based on enzymatically modified quinoa starches: Preparation, microstructures, hydrophilic property and emulsifying property

Quinoa starch was developed as a new kind of Pickering emulsifier by enzymatic modification. The morphological structure, crystalline structure, lamellar structure, fractal structure, particle size distribution, contact angle, emulsion index (EI), and emulsion micromorphology were studied to explore the relationship between structure characteristics, hydrophilic property, and emulsifying properties of enzymatically modified (EM) quinoa starches. With the increasing enzymatic hydrolysis time in the test range of 0-9 h, particle size of EM quinoa starch decreased, and the broken starch and contact angle of EM quinoa starch increased; the EI value of emulsions with EM quinoa starch increased, and the oil droplet size of emulsions with EM quinoa starch decreased. It suggested that both the smallest particle size and the closest extent of the contact angle to 90° derived the best emulsifying property of EM-9. The EM quinoa starch had higher emulsifying capacity at higher oil volume fraction (Φ) (50%) than at lower Φ (20%), proving that the EM starch has potential to be used as Pickering emulsifiers in higher oil products, such as salad dressing.

Jin Shofu Starch Nanoparticles for the Consolidation of Modern Paintings

Matte, porous, and weakly bound paint layers, typically found in modern/contemporary art, represent an unsolved conservation challenge. Current conservation practice relies on synthetic or natural adhesives that can alter dramatically the optical properties of paints. Alternatively, we propose a novel nanostructured consolidant based on starch, a renewable natural polymer. We synthesized starch nanoparticles (SNPs) to boost their penetration into the porous painted layers; upon solvent evaporation, the particles were expected to adhere to the pigments thanks to their large surface area and abundant -OH groups. The SNPs were formulated through a bottom-up approach, where gluten-removed Jin Shofu wheat starch was gelatinized and then precipitated in a nonsolvent. The low gelatinization temperature of wheat starch is likely key to favor disassembly in alkali and reassembly in the nonsolvent. The synthesis conditions can be tuned to obtain amorphous SNPs of ca. 50 nm with acceptable polydispersity. The particles swell in water to form nanosized gel-like fractal domains (as observed with cryogenic electron microscopy), formed by the organization of smaller units in polymer-rich and -deficient regions. Aqueous and hydroalcoholic particles' dispersions were assessed on aged ultramarine blue mock-ups that mimic degraded modern/contemporary paints. The consolidation effectiveness was evaluated with a specifically designed in-house protocol: the SNPs distribute across the paint section and strongly increase pigments' cohesion while preserving the original optical properties of the painted layer, as opposed to dispersions of bulk starch that simply accumulate on the paint surface, forming superficial glossy films. The Jin Shofu SNPS proved to be a new promising tool for the consolidation of weakened paintings, opening perspectives in the formulation and application of consolidants for modern and contemporary art.

Spray dried nanoemulsions loaded with curcumin, resveratrol, and borage seed oil: The role of two different modified starches as encapsulating materials

Recently, food industries are directing on the promotion of innovative food matrices fortified with bioactive compounds in order to enhance the consumer's health. Octenyl succinic anhydride modified starches (OSA-MS) such as Hi-cap100 (HCP) and purity gum 2000 (PUG) were used to fabricate emulsions co-entrapped with borage seed oil (BSO), resveratrol (RES) and curcumin (CUR), which were further spray dried to obtain powders. The fabricated microcapsules loaded with BSO, RES, and CUR displayed excellent dissolution performance, high encapsulation efficiency (≈93.05%) as well as semi-spherical shape, revealed via scanning electron microscopy (SEM). We also evaluated the impact of storage time (4 weeks) and temperature (40 °C) on the physicochemical characterization of OSA-MS coated microcapsules. Microcapsules coated with HCP exhibited greater oxidative stability, lower water activity and moisture contents rather than PUG coated microcapsules during storage because of its good film-forming properties. Addition of CUR enhanced the oxidative stability and retention of bioactive compounds. HCP microcapsules loaded with BSO + RES + CUR presented supreme retention of RES (70.32%), CUR 81.6% and γ-linolenic acid (≈ 96%). Our findings showed that CUR acted as an antioxidant agent; also, lower molecular weight OSA-MS as wall material could be used for the entrapment of bioactive compounds and promotion of innovative food products.

Synergistic effects of starch nanoparticles and chitin nanofibers on the stability of oil-in-water Pickering emulsions

Starch nanoparticles (SNPs) and Chitin nanofibers (ChFs) have been recognized to be effective for emulsion stabilization. Hence, the use of multiple solid nanoparticles seems to be a promising approach to improve emulsion stability. This work aims to studyemulsions stabilized by a combination of SNPs and ChFs at different concentrations over storage time and different environmental conditions. Sonicated emulsions were found to have a significantly higher stability compared to non-sonicated emulsions. Furthermore, SNP/ChF-stabilized emulsions showed smaller droplet sizes and higher stability within a wide range of temperatures and pH, suggesting a synergistic effect between both particles as stabilizers. The addition of NaCl showed limited impact, particularly in concentrations up to 200 mM, on the improvement of the stability of emulsions. The combined use of SNPs and ChFs allowed emulsion stabilization at lower solid nanoparticles concentrations than when only either SNPs or ChFs were used.

Effect of homogenization-pressure-assisted enzymatic hydrolysis on the structural and physicochemical properties of lotus-seed starch nanoparticles

In previous studies, we successfully prepared lotus-seed starch nanoparticles (LS-SNPs) using enzymatic methods. To further improve their performance, we studied the structural, physical and chemical properties of LS-SNPs prepared by high-pressure homogenization (HPH)-assisted enzymatic hydrolysis (EH). HPH treatments at different pressures and frequencies have a significant effect on the particle size and molecular weight of LS-SNPs. Structural analyses showed that LS-SNP and H-LS-SNP both comprised B-type starch crystals. As the homogenization pressure and frequency were increased, the relative crystallinity of H-LS-SNP first increased and then decreased, indicating that HPH treatment affected the double-helix structure of LS-SNPs. The results also show that moderate HPH treatment was beneficial for enzymatic hydrolysis, but when the HPH treatment was further increased, it destroyed the ordered structure of LS-SNPs. Our research showed that H-LS-SNPs with the smallest particle size and the highest crystallinity were obtained under pressure of 150 MPa, a homogenization frequency of five times the original, and a material-to-liquid ratio of 3%. The results indicate that HHP-assisted EH is a suitable method for preparing SNPs. These findings provide new ideas for the preparation of SNPS to meet the needs of food industry.

Synthesis of controlled size starch nanoparticles (SNPs)

Starch nanoparticles (SNPs) are a promising choice for the strategic development of new renewable and biodegradable nanomaterials for novel biomedical and pharmaceutical applications when loaded with antibiotics or with anticancer agents as target drug delivery systems. The final properties of the SNPs are strongly influenced by the synthesis method and conditions being a controlled and monodispersed size crucial for these applications. The aim of this work was to synthesize controlled size SNPs through nanoprecipitation and microemulsion methods by modifying main operating parameters regarding the effect of amylose and amylopectin ratio in maize starches. SNPs were characterized by size and shape. SNPs from 59 to 118 nm were obtained by the nanoprecipitation method, registering the higer values when surfactant was added to the aqueous phase. Microemulsion method led to 35-147 nm sizes observing a higher particle formation capacity. The composition of the maize used influenced the final particle size and shape.

Phase Inversions Observed in Thermoresponsive Pickering Emulsions Stabilized by Surface Functionalized Colloidal Silica

In this study, the emulsification performance of functionalized colloidal silica is explored with the aim to achieve phase inversion of particle-stabilized (Pickering) emulsion systems. An increased understanding of inversion conditions can facilitate surfactant-free emulsion fabrication and expand its use in industrial applications. Phase inversion was achieved by adjusting the temperature but without changing the composition of the emulsion formulation. Silica nanoparticles modified with hydrophobic propyl groups and hydrophilic methyl poly(ethylene)glycol (mPEG) groups are used as emulsifiers, enabling control of the wettability of the particles and exploration of phase inversion phenomena, the latter due to the thermoresponsiveness of the attached PEG chains. The phase inversion conditions as well as the reversibility of the emulsion systems were examined at varying electrolyte concentrations and pH values of the suspensions. Transitional phase inversions, from oil-in-water and water-in-oil and back, were observed in functionalized silica particle-stabilized butanol emulsions at distinct temperatures. The phase inversion temperature was affected by electrolyte concentration and pH conditions due to salting-out effects, PEG-silica interactions, and the effects of the particle surface charge. Investigations of phase inversion conditions, temperature, and hysteresis effects in Pickering emulsions can improve the theoretical understanding of these phenomena and facilitate the implementation of low-energy emulsion preparation.

Microscopic Techniques for the Analysis of Micro and Nanostructures of Biopolymers and Their Derivatives

Natural biopolymers, a class of materials extracted from renewable sources, is garnering interest due to growing concerns over environmental safety; biopolymers have the advantage of biocompatibility and biodegradability, an imperative requirement. The synthesis of nanoparticles and nanofibers from biopolymers provides a green platform relative to the conventional methods that use hazardous chemicals. However, it is challenging to characterize these nanoparticles and fibers due to the variation in size, shape, and morphology. In order to evaluate these properties, microscopic techniques such as optical microscopy, atomic force microscopy (AFM), and transmission electron microscopy (TEM) are essential. With the advent of new biopolymer systems, it is necessary to obtain insights into the fundamental structures of these systems to determine their structural, physical, and morphological properties, which play a vital role in defining their performance and applications. Microscopic techniques perform a decisive role in revealing intricate details, which assists in the appraisal of microstructure, surface morphology, chemical composition, and interfacial properties. This review highlights the significance of various microscopic techniques incorporating the literature details that help characterize biopolymers and their derivatives.

Application of Microfluidics in the Production and Analysis of Food Foams

Emulsifiers play a key role in the stabilization of foam bubbles. In food foams, biopolymers such as proteins are contributing to long-term stability through several effects such as increasing bulk viscosity and the formation of viscoelastic interfaces. Recent studies have identified promising new stabilizers for (food) foams and emulsions, for instance biological particles derived from water-soluble or water-insoluble proteins, (modified) starch as well as chitin. Microfluidic platforms could provide a valuable tool to study foam formation on the single-bubble level, yielding mechanistic insights into the formation and stabilization (as well as destabilization) of foams stabilized by these new stabilizers. Yet, the recent developments in microfluidic technology have mainly focused on emulsions rather than foams. Microfluidic devices have been up-scaled (to some extent) for large-scale emulsion production, and also designed as investigative tools to monitor interfaces at the (sub)millisecond time scale. In this review, we summarize the current state of the art in droplet microfluidics (and, where available, bubble microfluidics), and provide a perspective on the applications for (food) foams. Microfluidic investigations into foam formation and stability are expected to aid in optimization of stabilizer selection and production conditions for food foams, as well as provide a platform for (large-scale) production of monodisperse foams.