Preparation and characterization of novel chitosan and β-cyclodextrin polymer sponges for wound dressing applications

Recent research advances on polysaccharide-, peptide-, and protein-based hemostatic materials: A review

Hemorrhage is a potentially life-threatening emergency that can occur at any time or place. Whether traumatic, congenital, surgical, disease-related, or drug-induced, bleeding can lead to severe complications or death. Therefore, the development of efficient hemostatic materials is critical. However, the results and prognosis demonstrated by clinical means of hemostasis do not reach expectations. With the development of technology, novel hemostatic materials have been developed from polysaccharides (chitosan, hyaluronic acid, alginate, cellulose, cyclodextrins, starch, dextran, and carrageenan), peptides (self-assembling peptides), and proteins (silk fibroin, collagen, gelatin, keratin, and thrombin). These new materials exhibit high hemostatic efficacy due to the enhancement or interaction of various hemostatic mechanisms. The main forms include adhesives, sealants, bandages, hemostatic powders, and hemostatic sponges. This article introduces the clotting process and principles of hemostatic methods and reviews the research on polysaccharide-, peptide-, and protein-based hemostatic materials in the last five years. The design ideas and hemostatic principles of polysaccharide-, peptide-, and protein-based hemostatic materials are mainly introduced. Finally, we summarize material designs, advantages, disadvantages, and challenges regarding hemostatic materials.

Reactive oxygen species-responsive hydrophobic crosslinked chitosan films based on triple-function crosslinkers

Chitosan is widely used in reactive oxygen species (ROS)-responsive films but remains great challenges owing to its weak mechanical strength and strong hydrophilicity. Herein, we synthesized novel hydrophobic crosslinked CS films with ROS-responsive properties and excellent physicochemical properties. A novel crosslinker, 2-((10-carboxydecyl)thio)succinic acid, with long-chain alkanes, three carboxyl groups, and sulfhydryl groups was synthesized and then used to produce thioether-containing crosslinked CS membranes. The results suggested that crosslinking could significantly increase the tensile strength of the film from 15.67 MPa to 24.32 MPa. The compact structure of crosslinked chitosan film improved the hydrophobicity and degradability, reduced the thermal stability and swelling rates, exhibited excellent non- cytotoxicity. The in vitro release studies revealed that crosslinked chitosan films could displayed the highest flux about 1.40 mg/ (cm2 h) and significant NR fluorescence change over 80 %. Collectively, our results demonstrate the applicability of these films as ROS-responsive drug delivery systems.

Preparation and evaluation of Angelica sinensis polysaccharide-modified chitosan sponge for acute liver injury protection

In this study, a porous sponge material was formed by physically mixing chitosan (CS) and Angelica sinensis polysaccharide (ASP). After removing the water by freeze-drying, the CS/ASP sponge was obtained. The prepared sponges exhibited excellent swelling properties, thermal stability and biocompatibility as well as improvements over the insufficient mechanical properties of pure chitosan sponges. Notably, the ASP released from the CS/ASP sponge could be effectively absorbed by the liver, which endowed the CS/ASP sponge with effective liver-protective effects against CCl4-induced acute liver injury; these protective effects surpassed those of both blank CS and CS/Dextran sponges. The underlying protective mechanism may involve the activation of the Nrf2-mediated antioxidant signaling pathway and the inhibition of hepatocyte apoptosis. Understanding CS/ASP sponges may provide new insights and inspire new methods for the clinical application of ASP. At the same time, we hope to suggest future directions for the development of polysaccharide preparations.

Recent progress of antibacterial hydrogels in wound dressings

Hydrogels are essential biomaterials due to their favorable biocompatibility, mechanical properties similar to human soft tissue extracellular matrix, and tissue repair properties. In skin wound repair, hydrogels with antibacterial functions are especially suitable for dressing applications, so novel antibacterial hydrogel wound dressings have attracted widespread attention, including the design of components, optimization of preparation methods, strategies to reduce bacterial resistance, etc. In this review, we discuss the fabrication of antibacterial hydrogel wound dressings and the challenges associated with the crosslinking methods and chemistry of the materials. We have investigated the advantages and limitations (antibacterial effects and antibacterial mechanisms) of different antibacterial components in the hydrogels to achieve good antibacterial properties, and the response of hydrogels to stimuli such as light, sound, and electricity to reduce bacterial resistance. Conclusively, we provide a systematic summary of antibacterial hydrogel wound dressings findings (crosslinking methods, antibacterial components, antibacterial methods) and an outlook on long-lasting antibacterial effects, a broader antibacterial spectrum, diversified hydrogel forms, and the future development prospects of the field.

Injectable Chitosan-Based Hydrogels for Trans-Cinnamaldehyde Delivery in the Treatment of Diabetic Foot Ulcer Infections

Diabetic foot ulcers (DFU) are among the most common complications in diabetic patients and affect 6.8% of people worldwide. Challenges in the management of this disease are decreased blood diffusion, sclerotic tissues, infection, and antibiotic resistance. Hydrogels are now being used as a new treatment option since they can be used for drug delivery and to improve wound healing. This project aims to combine the properties of hydrogels based on chitosan (CHT) and the polymer of β cyclodextrin (PCD) for local delivery of cinnamaldehyde (CN) in diabetic foot ulcers. This work consisted of the development and characterisation of the hydrogel, the evaluation of the CN release kinetics and cell viability (on a MC3T3 pre-osteoblast cell line), and the evaluation of the antimicrobial and antibiofilm activity (S. aureus and P. aeruginosa). The results demonstrated the successful development of a cytocompatible (ISO 10993-5) injectable hydrogel with antibacterial (99.99% bacterial reduction) and antibiofilm activity. Furthermore, a partial active molecule release and an increase in hydrogel elasticity were observed in the presence of CN. This leads us to hypothesise that a reaction between CHT and CN (a Schiff base) can occur and that CN could act as a physical crosslinker, thus improving the viscoelastic properties of the hydrogel and limiting CN release.

Cyclodextrin regulated natural polysaccharide hydrogels for biomedical applications-a review

Cyclodextrin and its derivative (CDs) are natural building blocks for linking with other components to afford functional biomaterials. Hydrogels are polymer network systems that can form hydrophilic three-dimensional network structures through different cross-linking methods and are developing as potential materials in biomedical applications. Natural polysaccharide hydrogels (NPHs) are widely adopted in biomedical field with good biocompatibility, biodegradability, low cytotoxicity, and versatility in emulating natural tissue properties. Compared with conventional NPHs, CD regulated natural polysaccharide hydrogels (CD-NPHs) maintain good biocompatibility, while improving poor mechanical qualities and unpredictable gelation times. Recently, there has been increasing and considerable usage of CD-NPHs while there is still no review comprehensively introducing their construction, classification, and application of these hydrogels from the material point of view regarding biomedical fields. To draw a complete picture of the current and future development of CD-NPHs, we systematically overview the classification of CD-NPHs, and provide a holistic view on the role of CD-NPHs in different biomedical fields, especially in drug delivery, wound dressing, cell encapsulation, and tissue engineering. Moreover, the current challenges and prospects of CD-NPHs are discussed rationally, providing an insight into developing vibrant fields of CD-NPHs-based biomedicine, and facilitating their translation from bench to clinical medicine.

Chitosan-based hemostatic sponges as new generation hemostatic materials for uncontrolled bleeding emergency: Modification, composition, and applications

The choice of hemostatic technique is a curial concern for surgery and as first-aid treatment in combat. To treat uncontrolled bleeding in complex wound environments, chitosan-based hemostatic sponges have attracted significant attention in recent years because of the excellent biocompatibility, degradability, hemostasis and antibacterial properties of chitosan and their unique sponge-like morphology for high fluid absorption rate and priority aggregation of blood cells/platelets to achieve rapid hemostasis. In this review, we provide a historical perspective on the use of chitosan hemostatic sponges as the new generation of hemostatic materials for uncontrolled bleeding emergencies in complex wounds. We summarize the modification of chitosan, review the current status of preparation protocols of chitosan sponges based on various composite systems, and highlight the recent achievements on the detailed breakdown of the existing chitosan sponges to present the relationship between their composition, physical properties, and hemostatic capacity. Finally, the future opportunities and challenges of chitosan hemostatic sponges are also proposed.

Rational Design of Intelligent and Multifunctional Dressing to Promote Acute/Chronic Wound Healing

Currently, the clinic's treatment of acute/chronic wounds is still unsatisfactory due to the lack of functional and appropriate wound dressings. Intelligent and multifunctional dressings are considered the most advanced wound treatment modalities. It is essential to design and develop wound dressings with required functions according to the wound microenvironment in the clinical treatment. This work summarizes microenvironment characteristics of various common wounds, such as acute wound, diabetic wound, burns wound, scalded wound, mucosal wound, and ulcers wound. Furthermore, the factors of transformation from acute wounds to chronic wounds were analyzed. Then we focused on summarizing how researchers fully and thoroughly combined the complex microenvironment with modern advanced technology to ensure the usability and value of the dressing, such as photothermal-sensitive dressings, microenvironment dressing (pH-sensitive dressings, ROS-sensitive dressings, and osmotic pressure dressings), hemostatic dressing, guiding tissue regeneration dressing, microneedle dressings, and 3D/4D printing dressings. Finally, the revolutionary development of wound dressings and how to transform the existing advanced functional dressings into clinical needs as soon as possible have carried out a reasonable and meaningful outlook.

Local delivery of biocompatible lentinan/chitosan composite for prolonged inhibition of postoperative breast cancer recurrence

Postsurgical localized chemotherapy for breast cancer recurrence (BCR) still faces many problems which dampen researchers' enthusiasm and discounted prognosis. Simple strategies with controllable toxicities are expected to address these hurdles. Lentinan (LNT) has excellent biocompatibility and notable antitumor activity but rather low bioavailability after intravenous or oral administration. Here, a sponge-like LNT/chitosan composite (LNT/CS sponge) was prepared for efficient local delivery to prevent postoperative BCR. The obtained sponges exhibit uniform porosity and sustained release of LNT in vitro and in vivo. Furthermore, the sponges were implanted and showed significant reduction of postsurgical recurrence and suppression of long-term tumor regrowth with favorable biocompatibility in a subcutaneous postsurgical recurrence mouse model. Subsequent studies revealed that LNT can restrain the stemness of breast cancer cells, which may account for the long-term inhibition of tumor relapse. Therefore, LNT/CS sponge has a great potential as a promising alternative for postsurgical BCR.

Nanoencapsulation of hydroxytyrosol in chitosan crosslinked with sodium bisulfate tandem ultrasonication: Techno-characterization, release and antiproliferative properties

This research includes production of chitosan nanocapsules through ionic gelation with sodium bisulfate for nanoencapsulation of hydroxytyrosol (HT) using ultrasonication in tandem. The resulting nanocapsules encapsulating HT were analyzed for particle size, ζ-potential, packaging characteristics, FESEM, ATR-FTIR, XRD, DSC, in vitro release, antioxidant potential and antiproliferative properties. The nanocapsules (size 119.50-365.21 nm) were spherical to irregular shaped with positive ζ-potential (17.50-18.09 mV). The encapsulation efficiency of 5 mg/g HT (HTS1) and 20 mg/g HT (HTS2) was 77.13% and 56.30%, respectively. The nanocapsules were amorphous in nature with 12.34% to 15.48% crystallinity and crystallite size between 20 nm and 27 nm. Formation of nanocapsules resulted in increasing the glass transition temperature. HTS2 delivered 67.12% HT (HTS1 58.89%) at the end of the simulated gastrointestinal digestion. The nanoencapsulated HT showed higher antioxidant and antiproliferative (against A549 and MDA-MB-231 cancer cell lines) properties than the free HT.

How Adding Chlorhexidine or Metallic Nanoparticles Affects the Antimicrobial Performance of Calcium Hydroxide Paste as an Intracanal Medication: An In Vitro Study

The aim of our study was to explore the potential value of metallic (Ag, Cu, and Zn) salts, polymer/metallic nanoparticles, and chlorhexidine (CHX) for improving the antimicrobial activity of calcium hydroxide (CH) against E. faecalis and C. albicans, associated with persistent endodontic infections. A first screening was performed by determining minimum inhibitory/bactericidal concentrations (MIC/MBC). Antimicrobial activity of the CH paste mixed with metallic salts, chitosan or cyclodextrin polymer metallic nanoparticles was compared to the antimicrobial activity of CH paste alone and CH + CHX using a time-kill kinetics assay. The effect of the antimicrobials on the rheological and the key mechanical properties were also examined. Copper and zinc were discarded because of their MIC/MBC values and silver because of its kill time curve profile. Except for a slower setting time after 24 h and a higher weight loss after 1 week of incubation, the mechanical behavior of the CH paste was unaffected by the addition of CHX. Polymeric/metallic nanoparticles failed to potentiate the antimicrobial effect of CH. By contrast, CHX increased this effect and thus could help eradicate E. faecalis associated with persistent root canal infections without altering the desired key physical properties of the CH paste.

When Cyclodextrins Met Data Science: Unveiling Their Pharmaceutical Applications through Network Science and Text-Mining

We present a data-driven approach to unveil the pharmaceutical technologies of cyclodextrins (CDs) by analyzing a dataset of CD pharmaceutical patents. First, we implemented network science techniques to represent CD patents as a single structure and provide a framework for unsupervised detection of keywords in the patent dataset. Guided by those keywords, we further mined the dataset to examine the patenting trends according to CD-based dosage forms. CD patents formed complex networks, evidencing the supremacy of CDs for solubility enhancement and how this has triggered cutting-edge applications based on or beyond the solubility improvement. The networks exposed the significance of CDs to formulate aqueous solutions, tablets, and powders. Additionally, they highlighted the role of CDs in formulations of anti-inflammatory drugs, cancer therapies, and antiviral strategies. Text-mining showed that the trends in CDs for aqueous solutions, tablets, and powders are going upward. Gels seem to be promising, while patches and fibers are emerging. Cyclodextrins' potential in suspensions and emulsions is yet to be recognized and can become an opportunity area. This is the first unsupervised/supervised data-mining approach aimed at depicting a landscape of CDs to identify trending and emerging technologies and uncover opportunity areas in CD pharmaceutical research.

In Vitro Microbiological and Drug Release of Silver/Ibuprofen Loaded Wound Dressing Designed for the Treatment of Chronically Infected Painful Wounds

This study consisted of developing a dressing loaded with silver (Ag) and ibuprofen (IBU) that provides a dual therapy, antibacterial and antalgic, intended for infected painful wounds. Therefore, non-woven polyethyleneterephtalate (PET) textiles nonwovens were pre-treated by cyclodextrin crosslinked with citric acid by a pad/dry/cure process. Then, textiles were impregnated in silver solution followed by a thermal treatment and were then coated by Layer-by-Layer (L-b-L) deposition of a polyelectrolyte multilayer (PEM) system consisting of anionic water-soluble poly(betacyclodextrin citrate) (PCD) and cationic chitosan. Finally, ibuprofen lysinate (IBU-L) was loaded on the PEM coating. We demonstrated the complexation of IBU with native βCD and PCD by phase solubility diagram and ¹H NMR. PEM system allowed complete IBU-L release in 6 h in PBS pH 7.4 batch (USP IV). On the other hand, microbiological tests demonstrated that loaded silver induced bacterial reduction of 4 Log₁₀ against S. aureus and E. coli and tests revealed that ibuprofen lysinate loading did not interfere with the antibacterial properties of the dressing.

Recent advances on polymeric hydrogels as wound dressings

Severe hemorrhage is a leading cause of high mortality in critical situations like disaster, accidents, and warfare. The resulting wounds could induce severe physical and psychological trauma to patients and also bring an immense socio-economic burden. Hence, rapid hemostasis and wound healing techniques have become critical initiatives for life-saving treatment. Although traditional methods relying on bandages and gauzes are effective in controlling hemorrhage, they suffer from several limitations: nonbiodegradability, being susceptible to infection, being unsuitable for the irregular wound, secondary tissue damage, and being almost ineffective for wound healing. Owing to the merits of high porosity, good biocompatibility, tunable physicochemical properties, and being beneficial for wound healing, hydrogels with excellent performance have drawn intensive attention and numerous novel effective hydrogel dressings have been widely developed. In this Review, after introducing some commonly used strategies for the synthesis of hydrogels, the most recent progress on polymer-based hydrogels as wound dressings is discussed. Particularly, their hemostasis, antibacterial, and biodegradation properties are introduced. Finally, challenges and future perspectives about the development of hydrogels for wound dressings are outlined.

Structural characteristics of polysaccharide microcapsules fromNostoc commune, and their applications in skin wound healing and pathological repair

In this study, the extraction conditions of Nostoc commune Vauch polysaccharide (NCVP) were optimized by single factor and orthogonal experiments. Then, the microcapsules (NCVPM) was prepared. After analyzing the microcapsule structural, thermal characteristics, the skin wound healing ability was studied by establishing back trauma rat models. Results showed that, the NCVP yield was 10.37% under the following optimum conditions: 210 minute extraction time, solid-liquid ratio of 1:50 and extraction temperature of 90°C. The overall performance of the microcapsule was the best when the concentration of sodium alginate, calcium chloride and chitosan was 2%, 3% and 0.3%, respectively. NCVPM had spherical morphology, typical microcapsule structural characteristics and good thermal stability, and NCVP was dispersed in the microcapsules. NCVPM showed good biocompatibility and biodegradability, which met the requirements for slow-release polymer materials. After 14 days treatment, the wound healing rate was 92.4%, the cells were arranged neatly and regularly, the cell nucleus became large and elliptical, and the cell has a tendency to divide, the fibers and microvessel were significantly more. By evaluating mechanism, NVCPM could increase the contents of hydroxyproline (HYP) and glutathione (GSH-Px) to protect cells from oxidative damage, leading in turn to accelerate wound healing and shorted wound healing times. And could accelerate cell division, collagen and microvascular production by increasing transcription levels of Vascular endothelial growth factor (VEGF) mRNA and miRNA-21.

Thymine-modified chitosan with broad-spectrum antimicrobial activities for wound healing

Avoiding wound infections is a major challenge in wound care management, and new materials are urgently needed to address these problems. Herein, four water-soluble thymine-modified chitosan (TC) derivatives with the degree of substitution (DS) ranging from 0.23 to 0.62 were synthesized and freeze-dried to obtain porous sponge dressings. TC derivatives had broad-spectrum antibacterial activities against gram-negative bacteria, gram-positive bacteria, fungi, drug-resistance bacteria, Pseudomonas aeruginosa and Acinetobacter baumannii. Especially, the antioxidant and antibacterial properties of TC derivatives increased with increasing DS. Furthermore, TC derivatives showed excellent biocompatibility and blood compatibility. TC sponges could significantly accelerate the wound healing process than gauze and chitosan sponge. The histological analysis and immunohistochemical staining showed that the wounds treated with TC sponges displayed fewer inflammatory cells, and faster regeneration of epithelial tissue, collagen deposition and new blood vessel formation speed. Therefore, TC sponges can shed new light for wound dressing design.

Chitosan/Polycyclodextrin (CHT/PCD)-Based Sponges Delivering VEGF to Enhance Angiogenesis for Bone Regeneration

Vascularization is one of the main challenges in bone tissue engineering (BTE). In this study, vascular endothelial growth factor (VEGF), known for its angiogenic effect, was delivered by our developed sponge, derived from a polyelectrolyte complexes hydrogel between chitosan (CHT) and anionic cyclodextrin polymer (PCD). This sponge, as a scaffold for growth factor delivery, was formed by freeze-drying a homogeneous CHT/PCD hydrogel, and thereafter stabilized by a thermal treatment. Microstructure, water-uptake, biodegradation, mechanical properties, and cytocompatibility of sponges were assessed. VEGF-delivery following incubation in medium was then evaluated by monitoring the VEGF-release profile and its bioactivity. CHT/PCD sponge showed a porous (open porosity of 87.5%) interconnected microstructure with pores of different sizes (an average pore size of 153 μm), a slow biodegradation (12% till 21 days), a high water-uptake capacity (~600% in 2 h), an elastic property under compression (elastic modulus of compression 256 ± 4 kPa), and a good cytocompatibility in contact with osteoblast and endothelial cells. The kinetic release of VEGF was found to exert a pro-proliferation and a pro-migration effect on endothelial cells, which are two important processes during scaffold vascularization. Hence, CHT/PCD sponges were promising vehicles for the delivery of growth factors in BTE.

Designed sponges based on chitosan and cyclodextrin polymer for a local release of ciprofloxacin in diabetic foot infections

Diabetic foot infections are the most common complications requiring hospitalisation of patients with diabetes. They often result in amputation to extremities and are associated with high morbi-mortality rates, especially when bone is infected. Treatment of these complications is based on surgical procedures, nursing care and systemic antibiotic therapy for several weeks, with a significant risk of relapse. Due to low blood flow and damage caused by diabetic foot infection, blood supply is decreased, causing low antibiotic diffusion in the infected site and an increase of possible bacterial resistance, making this type of infection particularly difficult to treat. In this context, the aim of this work was to develop a medical device for local antibiotic release. The device is a lyophilized physical hydrogel, i.e a sponge based on two oppositely charged polyelectrolytes (chitosan and poly(cyclodextrin citrate)). Cyclodextrins, via inclusion complexes, increase drug bioavailability and allow an extended release. Using local release administration increases concentrations in the wound without risk of toxicity to the body and prevents the emergence of resistant bacteria. The hydrogel was characterised by rheology. After freeze-drying, a curing process was implemented. The swelling rate and cell viability were evaluated, and finally, the sponge was impregnated with a ciprofloxacin solution to evaluate its drug release profile and its antibacterial activity.

Cyclodextrin as a magic switch in covalent and non-covalent anticancer drug release systems

Cancer has been a threat to human health, so its treatment is a huge challenge to the present medical field. One of commonly used methods is the controlled release of anticancer drug to reduce the dose for patients, increase the stability of drug treatment and minimize side effects. Cyclodextrin is a kind of cyclic oligosaccharide produced by amylase hydrolysis. Because cyclodextrin contains a cavity structure and active hydroxyl groups, it has a positive effect on the study of the controlled release of anticancer drugs. This article reviews the controlled release of current anticancer drugs based on cyclodextrins as a "flexible switch", and discusses the classification of different types of release systems, highlighting their role in cancer treatment. Moreover, the opportunities and challenges of cyclodextrin as a magic switch in the controlled release of anticancer drugs are discussed.

Preparation of complex microcapsules of soluble polysaccharide from Glycyrrhiza uralensis and its application in wound repair and scar inhibition

The extraction process of Glycyrrhiza soluble polysaccharide (GP) was optimized by RSM, a rat trauma model was established via longitudinal incision on the back skin. The effects of GP combined with microcapsule collagen on the repair of rat injury model were discussed at different levels, Based on the content of hydroxyproline at the whole animal level, the proliferation of granulation tissue stained by HE, the number of microvessels labeled by CD34, the production of collagen fibers stained by Masson, the level of phosphorylation of STAT3 protein and that of VEGF at protein level were investigated. The results showed that after the administration of GP combined with microcapsules, the content of hydroxyproline in granulation tissue increased, the proliferation of capillaries and fibroblasts in granulation tissue became active, and the number of microvessels in wound increased. The formation density of collagen fibers was uniform and orderly. GP combined with microcapsules could activate the expression of p-STAT3 and VEGF proteins and up-regulate the transcription level of VEGF mRNA and miRNA-21 genes. Furthermore, GP combined with microcapsules could accelerate wound healing and promote neovascularization.

Biomemristic Behavior for Water-Soluble Chitosan Blended with Graphene Quantum Dot Nanocomposite

Bionanocomposite has promising biomemristic behaviors for data storage inspired by a natural biomaterial matrix. Carboxylated chitosan (CCS), a water-soluble derivative of chitosan avoiding the acidic salt removal, has better biodegradability and bioactivity, and is able to absorb graphene quantum dots (GQDs) employed as charge-trapping centers. In this investigation, biomemristic devices based on water-soluble CCS:GQDs nanocomposites were successfully achieved with the aid of the spin-casting method. The promotion of binary biomemristic behaviors for Ni/CCS:GQDs/indium-tin-oxide (ITO) was evaluated for distinct weight ratios of the chemical components. Fourier transform infrared spectroscopy, Raman spectroscopy (temperature dependence), thermogravimetric analyses and scanning electron microscopy were performed to assess the nature of the CCS:GQDs nanocomposites. The fitting curves on the experimental data further confirmed that the conduction mechanism might be attributed to charge trapping-detrapping in the CCS:GQDs nanocomposite film. Advances in water-soluble CCS-based electronic devices would open new avenues in the biocompatibility and integration of high-performance biointegrated electronics.

Stent coating by electrospinning with chitosan/poly-cyclodextrin based nanofibers loaded with simvastatin for restenosis prevention

The main cause of failure of angioplasty stenting is restenosis due to neointimal hyperplasia, a too high proliferation of smooth muscle cells (SMC). The local and sustained delivery of selective pleiotropic drugs to limit SMC proliferation seems to be the hopeful solution to minimize this post surgery complication. The aim of this study is to develop a stent covered by nanofibers (NFs) produced by electrospinning, loaded with simvastatin (SV), a drug commonly used for restenosis prevention. NFs were prepared from the electrospinning of a solution containing SV and a mixture of chitosan (cationic) and β-cyclodextrin (CD) polymer (anionic) which form together a polyelectrolyte complex that makes up the NFs matrix. First, the SV/CD interactions were studied by phase solubility diagram, DRX and DSC. The electrospinning process was then optimized to cover a self-expandable NiTiNOL stent and the mechanical resistance of the NFs sheath upon its introduction inside the delivery catheter was considered, using a crimper apparatus. The morphology, coating thicknesses and diameters of nanofibers were studied by scanning electron microscopy. The SV loading rates on the stents were controlled by the electrospinning time, and the presence of SV in the NFs was confirmed by FTIR. NFs stability in PBS pH 7.4 buffer could be improved after thermal post-treatment of NFs and in vitro release of SV in dynamic conditions demonstrated that the release profiles were influenced by the presence of CD polymer in NFs and by the thickness of the NFs sheath. Finally, a covered stent delivering 3 µg/mm² of SV within 6 h was obtained, whose efficiency will be investigated in a further in vivo study.

The classification and application of cyclodextrin polymers: a review

After introducing the concept of cyclodextrin polymers, their classification and applications have been summarized.

Bioactive Medications for the Delivery of Platelet Derivatives to Skin Wounds

Chronic wounds are the result of alterations in the complex series of events of physiological wound healing. In particular, the prolonged inflammation results in increased protease activity, in the deg-radation of extracellular matrix (ECM) and of growth factors (GFs). The relevance of platelet GFs in maintaining and restoring the complex equilibrium of different moments in wound healing is well recog-nized. Moreover, the observed decrease of their levels in chronic wounds suggested a possible therapeutic role of the external application to the wounds. It has been also pointed out that tissue regeneration can be more efficiently obtained by the synergic use of different GFs. Platelet derivatives such as platelet-rich plasma (PRP) and platelet lysate (PL) are able to release GFs in a balanced pool. Their therapeutic use in regenerative medicine and wound healing has been therefore more and more frequently proposed in clini-cal trials and in the literature. The development of a suitable formulation able to control the GFs release rate, to protect the GFs, and to assure their prolonged contact with the wound site, is of paramount im-portance for the therapeutic success. The present review considers some formulation approaches for PRP and PL application to wounds

Chitosan-based (Nano)materials for Novel Biomedical Applications

Chitosan-based nanomaterials have attracted significant attention in the biomedical field because of their unique biodegradable, biocompatible, non-toxic, and antimicrobial nature. Multiple perspectives of the proposed antibacterial effect and mode of action of chitosan-based nanomaterials are reviewed. Chitosan is presented as an ideal biomaterial for antimicrobial wound dressings that can either be fabricated alone in its native form or upgraded and incorporated with antibiotics, metallic antimicrobial particles, natural compounds and extracts in order to increase the antimicrobial effect. Since chitosan and its derivatives can enhance drug permeability across the blood-brain barrier, they can be also used as effective brain drug delivery carriers. Some of the recent chitosan formulations for brain uptake of various drugs are presented. The use of chitosan and its derivatives in other biomedical applications is also briefly discussed.

Influence of the Soluble⁻Insoluble Ratios of Cyclodextrins Polymers on the Viscoelastic Properties of Injectable Chitosan⁻Based Hydrogels for Biomedical Application

Injectable pre-formed physical hydrogels provide many advantages for biomedical applications. Polyelectrolyte complexes (PEC) formed between cationic chitosan (CHT) and anionic polymers of cyclodextrin (PCD) render a hydrogel of great interest. Given the difference between water-soluble (PCDs) and water-insoluble PCD (PCDi) in the extension of polymerization, the present study aims to explore their impact on the formation and properties of CHT/PCD hydrogel obtained from the variable ratios of PCDi and PCDs in the formulation. Hydrogels CHT/PCDi/PCDs at weight ratios of 3:0:3, 3:1.5:1.5, and 3:3:0 were elaborated in a double–syringe system. The chemical composition, microstructure, viscoelastic properties, injectability, and structural integrity of the hydrogels were investigated. The cytotoxicity of the hydrogel was also evaluated by indirect contact with pre-osteoblast cells. Despite having similar shear–thinning and self-healing behaviors, the three hydrogels showed a marked difference in their rheological characteristics, injectability, structural stability, etc., depending on their PCDi and PCDs contents. Among the three, all the best above-mentioned properties, in addition to a high cytocompatibility, were found in the hydrogel 3:1.5:1.5. For the first time, we gained a deeper understanding of the role of the PCDi/PCDs in the injectable pre-formed hydrogels (CHT/PCDi/PCDs), which could be further fine-tuned to enhance their performance in biomedical applications.

Treatment Strategies for Infected Wounds

The treatment of skin wounds is a key research domain owing to the important functional and aesthetic role of this tissue. When the skin is impaired, bacteria can soon infiltrate into underlying tissues which can lead to life-threatening infections. Consequently, effective treatments are necessary to deal with such pathological conditions. Recently, wound dressings loaded with antimicrobial agents have emerged as viable options to reduce wound bacterial colonization and infection, in order to improve the healing process. In this paper, we present an overview of the most prominent antibiotic-embedded wound dressings, as well as the limitations of their use. A promising, but still an underrated group of potential antibacterial agents that can be integrated into wound dressings are natural products, especially essential oils. Some of the most commonly used essential oils against multidrug-resistant microorganisms, such as tea tree, St. John's Wort, lavender and oregano, together with their incorporation into wound dressings are presented. In addition, another natural product that exhibits encouraging antibacterial activity is honey. We highlight recent results of several studies carried out by researchers from different regions of the world on wound dressings impregnated with honey, with a special emphasis on Manuka honey. Finally, we highlight recent advances in using nanoparticles as platforms to increase the effect of pharmaceutical formulations aimed at wound healing. Silver, gold, and zinc nanoparticles alone or functionalized with diverse antimicrobial compounds have been integrated into wound dressings and demonstrated therapeutic effects on wounds.

Aliphatic Polyester Nanofibers Functionalized with Cyclodextrins and Cyclodextrin-Guest Inclusion Complexes

The fabrication of nanofibers by electrospinning has gained popularity in the past two decades; however, only in this decade, have polymeric nanofibers been functionalized using cyclodextrins (CDs) or their inclusion complexes (ICs). By combining electrospinning of polymers with free CDs, nanofibers can be fabricated that are capable of capturing small molecules, such as wound odors or environmental toxins in water and air. Likewise, combining polymers with cyclodextrin-inclusion complexes (CD-ICs), has shown promise in enhancing or controlling the delivery of small molecule guests, by minor tweaking in the technique utilized in fabricating these nanofibers, for example, by forming core⁻shell or multilayered structures and conventional electrospinning, for controlled and rapid delivery, respectively. In addition to small molecule delivery, the thermomechanical properties of the polymers can be significantly improved, as our group has shown recently, by adding non-stoichiometric inclusion complexes to the polymeric nanofibers. We recently reported and thoroughly characterized the fabrication of polypseudorotaxane (PpR) nanofibers without a polymeric carrier. These PpR nanofibers show unusual rheological and thermomechanical properties, even when the coverage of those polymer chains is relatively sparse (~3%). A key advantage of these PpR nanofibers is the presence of relatively stable hydroxyl groups on the outer surface of the nanofibers, which can subsequently be taken advantage of for bioconjugation, making them suitable for biomedical applications. Although the number of studies in this area is limited, initial results suggest significant potential for bone tissue engineering, and with additional bioconjugation in other areas of tissue engineering. In addition, the behaviors and uses of aliphatic polyester nanofibers functionalized with CDs and CD-ICs are briefly described and summarized. Based on these observations, we attempt to draw conclusions for each of these combinations, and the relationships that exist between their presence and the functional behaviors of their nanofibers.