Box-Behnken design based multi-objective optimisation of sequential extraction of pectin and anthocyanins from mango peels

Optimization of Polyphenol Extraction from Purple Corn Pericarp Using Glycerol/Lactic Acid-Based Deep Eutectic Solvent in Combination with Ultrasound-Assisted Extraction

Purple corn pericarp, a processing waste stream, is an extremely rich source of phytochemicals. Optimal polyphenol extraction parameters were identified using response surface methodology (RSM) by combining a deep eutectic solvent (DES) and ultrasound-assisted extraction (UAE) method. After DES characterization, Plackett-Burman design was used to screen five explanatory variables, namely, time, Temp (temperature), water, Amp (amplitude), and S/L (solid-to-liquid ratio). The total anthocyanin concentration (TAC), total polyphenol concentration (TPC), and condensed tannin (CT) concentration were the response variables. After identifying significant factors, the Box-Behnken design was utilized to identify the optimal extraction parameters. The experimental yields under the optimized conditions of time (10 min), temperature (60 °C), water concentration (42.73%), and amplitude (40%) were 36.31 ± 1.54 g of cyanidin-3-glucoside (C3G), 103.16 ± 6.17 g of gallic acid (GA), and 237.54 ± 9.98 g of epicatechin (EE) per kg of pericarp, with a desirability index of 0.858. The relative standard error among the predicted and experimental yields was <10%, validating the robustness of the model. HPLC analysis identified seven phytochemicals, and significant antioxidant activities were observed through four distinct assays. Metabolomic profiling identified 57 unique phytochemicals. The UAE technique combined with DES can efficiently extract polyphenols from purple corn pericarp in a short time.

Sequential extraction of anthocyanins and pectin from jabuticaba (Plinia cauliflora) peel: Peel pretreatment effect and ultrasound-assisted extraction

The jabuticaba bark is rich in anthocyanins and fibers, and its use may be of industrial interest. In the food sector, its used as an ingredient in the production of fermented products, liqueurs or enriched flours. It also has pharmaceutical and cosmetic applications. The objective was to evaluate the effect of pretreatment and fresh use of jabuticaba peels in the extraction of total phenolic compound (TPC) and total anthocyanin (TA) contents with and without ultrasound assistance and in the sequential extraction of pectin from the residue. In the TPC and TA extraction, a 3x2 factorial design was used. For conventional anthocyanin extraction (CAE), occurred in an incubator under agitation. For ultrasound-assisted anthocyanin extraction (UAE) was utilized an ultrasonic homogenizer with probe (20 kHz, 160 W). The extracts were quantified (TPC, TA, antioxidant activity and color). The residues were characterized and used for sequential pectin extraction, which was quantified and characterized. The results were subjected to analysis of variance. Fresh jabuticaba peel is a residue that can be used to sequentially extract phenolic compounds, particularly anthocyanins and pectin. The use of ultrasound (UAE) was less efficient than CAE for extracting TPC and TA or performing sequential extraction on all pretreatment peels.

Trends and challenges of fruit by-products utilization: insights into safety, sensory, and benefits of the use for the development of innovative healthy food: a review

A significant portion of the human diet is comprised of fruits, which are consumed globally either raw or after being processed. A huge amount of waste and by-products such as skins, seeds, cores, rags, rinds, pomace, etc. are being generated in our homes and agro-processing industries every day. According to previous statistics, nearly half of the fruits are lost or discarded during the entire processing chain. The concern arises when those wastes and by-products damage the environment and simultaneously cause economic losses. There is a lot of potential in these by-products for reuse in a variety of applications, including the isolation of valuable bioactive ingredients and their application in developing healthy and functional foods. The development of novel techniques for the transformation of these materials into marketable commodities may offer a workable solution to this waste issue while also promoting sustainable economic growth from the bio-economic viewpoint. This approach can manage waste as well as add value to enterprises. The goal of this study is twofold based on this scenario. The first is to present a brief overview of the most significant bioactive substances found in those by-products. The second is to review the current status of their valorization including the trends and techniques, safety assessments, sensory attributes, and challenges. Moreover, specific attention is drawn to the future perspective, and some solutions are discussed in this report.

Bioactive Compounds in Extracts from the Agro-Industrial Waste of Mango

Mango by-products are important sources of bioactive compounds generated by agro-industrial process. During mango processing, 35-60% of the fruit is discarded, in many cases without treatment, generating environmental problems and economic losses. These wastes are constituted by peels and seeds (tegument and kernel). The aim of this review was to describe the extraction, identification, and quantification of bioactive compounds, as well as their potential applications, published in the last ten years. The main bioactive compounds in mango by-products are polyphenols and carotenoids, among others. Polyphenols are known for their high antioxidant and antimicrobial activities. Carotenoids show provitamin A and antioxidant activity. Among the mango by-products, the kernel has been studied more than tegument and peels because of the proportion and composition. The kernel represents 45-85% of the seed. The main bioactive components reported for the kernel are gallic, caffeic, cinnamic, tannic, and chlorogenic acids; methyl and ethyl gallates; mangiferin, rutin, hesperidin, and gallotannins; and penta-O-galloyl-glucoside and rhamnetin-3-[6-2-butenoil-hexoside]. Meanwhile, gallic acid, ferulic acid, and catechin are reported for mango peel. Although most of the reports are at the laboratory level, they include potential applications in the fields of food, active packaging, oil and fat, and pharmaceutics. At the market level, two trends will stimulate the industrial production of bioactive compounds from mango by-products: the increasing demand for industrialized fruit products (that will increase the by-products) and the increase in the consumption of bioactive ingredients.

Pectin in Metabolic Liver Disease

Alterations in the composition of the gut microbiota (dysbiosis) are observed in nutritional liver diseases, including non-alcoholic fatty liver disease (NAFLD) and alcoholic liver disease (ALD) and have been shown to be associated with the severity of both. Editing the composition of the microbiota by fecal microbiota transfer or by application of probiotics or prebiotics/fiber in rodent models and human proof-of-concept trials of NAFLD and ALD have demonstrated its possible contribution to reducing the progression of liver damage. In this review, we address the role of a soluble fiber, pectin, in reducing the development of liver injury in NAFLD and ALD through its impact on gut bacteria.

Characterization and mechanism of aflatoxin degradation by a novel strain of Trichoderma reesei CGMCC3.5218

Aflatoxins, which are produced mainly by Aspergillus flavus and A. parasiticus, are recognized as the most toxic mycotoxins, which are strongly carcinogenic and pose a serious threat to human and animal health. Therefore, strategies to degrade or eliminate aflatoxins in agro-products are urgently needed. We investigated 65 Trichoderma isolates belonging to 23 species for their aflatoxin B₁ (AFB₁)-degrading capabilities. Trichoderma reesei CGMCC3.5218 had the best performance, and degraded 100% of 50 ng/kg AFB₁ within 3 days and 87.6% of 10 μg/kg AFB₁ within 5 days in a liquid-medium system. CGMCC3.5218 degraded more than 85.0% of total aflatoxins (aflatoxin B₁, B₂, G₁, and G₂) at 108.2–2323.5 ng/kg in artificially and naturally contaminated peanut, maize, and feed within 7 days. Box–Behnken design and response surface methodology showed that the optimal degradation conditions for CGMCC3.5218 were pH 6.7 and 31.3°C for 5.1 days in liquid medium. Possible functional detoxification components were analyzed, indicating that the culture supernatant of CGMCC3.5218 could efficiently degrade AFB₁ (500 ng/kg) with a ratio of 91.8%, compared with 19.5 and 8.9% by intracellular components and mycelial adsorption, respectively. The aflatoxin-degrading activity of the fermentation supernatant was sensitive to proteinase K and proteinase K plus sodium dodecyl sulfonate, but was stable at high temperatures, suggesting that thermostable enzymes or proteins in the fermentation supernatant played a major role in AFB₁ degradation. Furthermore, toxicological experiments by a micronucleus assay in mouse bone marrow erythrocytes and by intraperitoneal injection and skin irritation tests in mice proved that the degradation products by CGMCC3.5218 were nontoxic. To the best of our knowledge, this is the first comprehensive study on Trichoderma aflatoxin detoxification, and the candidate strain T. reesei CGMCC3.5218 has high efficient and environment-friendly characteristics, and qualifies as a potential biological detoxifier for application in aflatoxin removal from contaminated feeds.

Unveiling the Bioactive Potential of Fresh Fruit and Vegetable Waste in Human Health from a Consumer Perspective

Food supply disruption and shortage verified during the current pandemic events are a scenario that many anticipate for the near future. The impact of climate changes on food production, the continuous decrease in arable land, and the exponential growth of the human population are important drivers for this problem. In this context, adding value to food waste is an obvious strategy to mitigate food shortages, but there is a long way to go in this field. Globally, it is estimated that one-third of all food produced is lost. This is certainly due to many different factors, but the lack of awareness of the consumer about the nutritional value of certain foods parts, namely peels and seeds, is certainly among them. In this review, we will unveil the nutritional and bioactive value of the waste discarded from the most important fresh fruit and vegetables consumed worldwide as a strategy to decrease food waste. This will span the characterization of the bioactive composition of selected waste from fruits and vegetables, particularly their seeds and peels, and their possible uses, whether in our diet or recycled to other ends.

Ultrasonic-assisted preparation of eucalyptus oil nanoemulsion: Process optimization, in vitro digestive stability, and anti-Escherichia coli activity

Eucalyptus oil (EO) is a natural and effective antimicrobial agent; however, it has disadvantages such as poor water solubility and instability. The aim of this study was to investigate the effect of process vessels and preparation process parameters on the particle size of the emulsion droplets using ultrasonic technique and response surface methodology to prepare eucalyptus oil nanoemulsion (EONE). The optimal sonication process parameters in conical centrifuge tubes were confirmed: sonication distance of 0.9 cm, sonication amplitude of 18%, and sonication time of 2 min. Under these conditions, the particle size of EONE was 18.96 ± 4.66 nm, the polydispersity index was 0.39 ± 0.09, and the zeta potential was -31.17 ± 2.15 mV. In addition, the changes in particle size, potential, micromorphology, and anti-Escherichia coli activity of EONE during digestion were investigated by in vitro simulated digestion. The emulsion was stable in simulated salivary fluid, tended to aggregate in simulated gastric fluid, and increased in particle size and potential value in simulated intestinal fluid. EONE showed higher anti-E. coli activity than EO by simulated digestion. These results provide a useful reference for the in vivo antimicrobial application of the essential oil.

Kinetic, Thermodynamic, Physicochemical, and Economical Characterization of Pectin from Mangifera indica L. cv. Haden Residues

The effect of temperature (60, 70, 80, and 90 °C) and time (30, 45, 60, 75, and 90 min) on citric acid extraction of Haden mango (Mangifera indica L. cv. Haden) peel pectin was evaluated in the present study. In order to obtain a better understanding of both the extraction process and the characteristics of the pectin (obtained from an agro-industrial waste) for a future scaling process, the following characterizations were performed: (1) Kinetic, with the maximum extraction times and yields at all evaluated temperatures; (2) thermodynamic, obtaining activation energies, enthalpies, entropies, and Gibbs free energies for each stage of the process; (3) physicochemical (chemical analysis, monosaccharide composition, degree of esterification, galacturonic acid content, free acidity, Fourier-transform infrared spectroscopy, thermogravimetric and derivative thermogravimetric analyses); and (4) economical, of the pectin with the highest yield. The Haden mango peel pectin was found to be characterized by a high-esterified degree (81.81 ± 0.00%), regular galacturonic acid content (71.57 ± 1.26%), low protein (0.83 ± 0.05%) and high ash (3.53 ± 0.02%) content, low mean viscometric molecular weight (55.91 kDa), and high equivalent weight (3657.55 ± 8.41), which makes it potentially useful for food applications.

Persea Americana Agro-Industrial Waste Biorefinery for Sustainable High-Value-Added Products

Significant problems have arisen in recent years, such as global warming and hunger. These complications are related to the depletion and exploitation of natural resources, as well as environmental pollution. In this context, bioprocesses and biorefinery can be used to manage agro-industrial wastes for obtaining high-value-added products. A large number of by-products are composed of lignin and cellulose, having the potential to be exploited sustainably for chemical and biological conversion. The biorefinery of agro-industrial wastes has applications in many fields, such as pharmaceuticals, medicine, material engineering, and environmental remediation. A comprehensive approach has been developed toward the agro-industrial management of avocado (Persea americana) biomass waste, which can be transformed into high-value-added products to mitigate global warming, save non-renewable energy, and contribute to health and science. Therefore, this work presents a comprehensive review on avocado fruit waste biorefinery and its possible applications as biofuel, as drugs, as bioplastics, in the environmental field, and in emerging nanotechnological opportunities for economic and scientific growth.

Unsaturated and thiolated derivatives of polysaccharides as functional matrixes for tissue engineering and pharmacology: A review

This review examines investigations into the functionalization of polysaccharides by substituents containing multiple (CC) bonds and thiol (SH) groups that are prone to (co)polymerization in the presence of thermal, redox and photoinitiators or Michael addition reactions. A comparative analysis of the approaches to grafting the mentioned substituents onto the polysaccharide macromolecules was conducted. The use of the modified polysaccharides for the design of the 3D structures, including for the development of the pore bearing matrixes of cells or scaffolds utilized in regenerative medicine was examined. These modified polymers were also examined toward the design of excipient matrixes in pharmacological compositions, including with controllable release of active pharmaceuticals, as wel as of antibacterial and antifungal agents and others. In addition, a few examples of the use of modified derivatives in other areas are given.

Towards a green and sustainable fruit waste valorisation model in Brazil: optimisation of homogenizer-assisted extraction of bioactive compounds from mango waste using a response surface methodology

Food waste valorisation is currently at the core of discussions and development of future economic models which, allied to the application of green and sustainable technologies, offers a viable alternative to shift industrial practices towards a circular bioeconomy. The feasibility and technological possibilities based on an integrated mango waste biorefinery concept, focusing on the extraction of bioactive compounds, are discussed in this paper. Additionally, a statistically robust methodology is presented as a green approach to optimise the variables of a sustainable, low time and energy consumption extraction technique (homogenizer-assisted extraction). Maximum concentrations of the bioactive compounds were obtained in similar values of parameters ethanol/water concentration (67.73 and 70.11 %), sample/solvent ratio (29.33 and 28.17 %) and time (4.47 and 5.00 min) for mangiferin (354.4 mg/kg DW) and hyperoside (258.7 mg/kg DW), respectively. These results demonstrated the efficiency of the proposed green and sustainable method to obtain bioactive compounds from a very common and significant tropical fruit waste in Brazil, based on an integrated mango biorefinery concept.

Valorization of byproducts from tropical fruits: Extraction methodologies, applications, environmental, and economic assessment: A review (Part 1: General overview of the byproducts, traditional biorefinery practices, and possible applications)

Tropical fruits represent one of the most important crops in the world. The continuously growing global market for the main tropical fruits is currently estimated at 84 million tons, of which approximately half is lost or wasted throughout the whole processing chain. Developing novel processes for the conversion of these byproducts into value-added products could provide a viable way to manage this waste problem, aiming at the same time to create a sustainable economic growth within a bio-economy perspective. Given the ever-increasing concern about sustainability, complete valorization through a bio-refinery approach, that is, zero waste concept, as well as the use of green techniques is therefore of utmost importance. This paper aims to report the status on the valorization of tropical fruit byproducts within a bio-refinery frame, via the application of traditional methodologies, and with specific attention to the extraction of phenolics and carotenoids as bioactive compounds. The different types of byproducts, and their content of bioactives is reviewed, with a special emphasis on the lesser-known tropical fruits. Moreover, the bioactivity of the different types of extracts and their possible application as a resource for different sectors (food, pharmaceutical, and environmental sciences) is discussed. Consequently, this review presents the concepts of tropical fruit biorefineries, and the potential applications of the isolated fractions.

Establishment and development of a CZE-UV method for rapid measurement of aprotinin potency

A new method for the measurement of aprotinin potency by CZE-UV detector was established for the first time. The on-line mixing of substrate, trypsin and aprotinin using at-inlet technology was realized by the established method. Enzymatic reaction, separation, and detection of substrate and product can be performed simultaneously online. The aprotinin potency can be measured within 4 min. The response surface methodology was used to optimize the incubation conditions of trypsin and substrate, and the optimized conditions were obtained under 17.39 mM phosphate buffer at pH 7.6, 1.40 min of incubation time. The repeatability of proposed method was evaluated in three different systems of capillary zone electrophoresis: (i) only substrate; (ii) trypsin and substrate; (iii) aprotinin, trypsin and substrate, and the RSDs of migration times and peak areas of substrate were less than 2.7 and 3.1%, respectively. The RSDs of migration times and peak areas of product were less than 2.1 and 3.0%, respectively. A formula was also developed to calculate the aprotinin potency in this method. In a word, the established CZE-UV method was convenient, fast, and environmentally friendly for the measurement of aprotinin potency.

Optimization of an Ultrasound-Assisted Extraction for Simultaneous Determination of Antioxidants in Sesame with Response Surface Methodology

Sesame is a nutritional agricultural product with medicinal properties. Accurate determination of micronutrients is important for the improvement of sesame quality and nutrition assessments. Our previous study showed that 10 antioxidants—d-homoproline, vitamin B₂, coniferyl aldehyde, hesperidin, phloretin, N-acetyl-l-leucine, l-hyoscyamine, ferulic acid, 5-methoxypsoralen, and 8-methoxypsoralen—in sesame were potential characteristic nutrients in sesame. Herein, simultaneous detection of 10 different types of antioxidants was developed by using ultrasound-assisted extraction coupled with liquid chromatography-tandem mass spectrometry (UAE-LC-MS/MS) with the help of response surface methodology. The significant variables and levels were screened and optimized by combining the single factor experiment, Plackett–Burman test, and Box–Behnken design. The optimal conditions for extraction of target antioxidants in sesame were methanol solution of 75.0%, liquid-to-material ratio of 20:1 (mL/g), extraction temperature of 50 °C, extraction power of 410.0 W, extraction time of 65 min. The total yield of targets was 21.74 μg/g under the optimized conditions. The mobile phase used was 0.1% formic acid in acetonitrile and 0.1% formic acid in water, and the column was a Thermo Syncronis C18 reverse phase column (100 mm × 2.1 mm, 3 μm). All targets required only one injection and could be quickly separated and assayed within 7 min. The limits of detection and limits of quantification for these 10 nutritional compounds ranged from 0.01 to 0.11 µg/kg and from 0.04 to 0.34 µg/kg, respectively. The validation results indicated that the method had reasonable linearity (R² ≥ 0.9990), good recoveries (71.1%–118.3%), satisfactory intra-day precision (≤9.6%) and inter-day precision (≤12.9%), and negligible matrix effects (≤13.8%). This simultaneous quantification method was accurate, fast, and robust for the assessment of sesame nutrition.