Removal of pharmaceuticals by novel magnetic genipin-crosslinked chitosan/graphene oxide-SO3H composite

Recent research landscape on chitosan-mineral-based composites for wastewater treatment: a comprehensive bibliometric analysis (2014-2024)

Chitosan-mineral composites are emerging as potential adsorbent materials for wastewater treatment because they are eco-friendly, cost-effective, and versatile for removing contaminants like heavy metals and dyes. Their rapid development in research requires a systematic analysis of research gaps, trends, and contributions at a global level to guide future innovations. This bibliometric study investigates and analyzes 1690 documents retrieved from the Web of Science published between 2014 and 2024, focusing on chitosan-mineral composites for wastewater treatment. We used Bibliometrix (R package), HistCite, and VOSviewer tools to examine publication trends, authorship, collaborations between countries, and networks of keywords. Key parameters included an important annual growth rate of 16.86%, 32.12 average citations per document, and contributions from 480 sources. The field has grown exponentially since 2018, with China, India, and Iran leading the research output. High citation rates (avg. 32.12 per document) reflect a strong academic impact, while 26.78% international collaboration underscores global engagement. As such, the analysis of keywords present in these papers found predominant themes that have driven research, namely adsorption mechanisms and composite functionalization (i.e., magnetic hybrids). Novel trends involve clay-chitosan synergies and nano-reinforced composites for pollutant-specific removal.

Adsorption of emerging pollutants utilizing chitosan derivatives: Recent advances and future perspective

Globalization resulted in technological advancement, and urban population growth. Consequently, pollution emerged as an imminent risk to the survival of all species on Earth. Consequently, on a worldwide basis, sustainability become a major issue for legislators. Inconsistent impacts on both human and animal growth and wellness triggered health issues associated with water contamination through the chronic toxicants. Micropollutants' pollution prompted severe concerns due to their malignant, indestructible, and accumulative properties. The elimination of these toxins from industrial processes has become one of the most significant ecological challenges. A variety of both organic and simulated sorbents are available, and each of these have unique benefits. In the recent years, chitosan and its composite materials have been attempted and have been proven to be applicable for the resolution of many challenging issues related to water pollution. Among various notable benefits of adsorption processes, economic viability, ease of access, and adherence to environmental regulations are notable. Considering the above-mentioned issues, the article targets the assessment of chitosan and its composite materials for relevant environmental applications. Accordingly, the article aims to examine the performance, advantages, and disadvantages of chitosan as an adsorbent.

Influence of Aluminum Incorporation on the Adsorptive Performance of Silica-Based Supported Sulfonic Acid for the Chemical Recovery of Gaseous O-Xylene

A group of silica-based supports with varying Al/Si ratios (S-x) was synthesized using the sol-gel method, followed by a chlorosulfonic acid modification to produce supported sulfonic acids (SA-x). The S-x and SA-x materials, along with their adsorption products, were characterized via techniques such as FTIR, BET, and HPLC-MS. The analysis revealed that the sulfonic acid groups in the SA-x materials existed in two anchoring states: the covalently bonded (CB) state [SiOx-O]ɗ--SO3Hɗ+ and the ion-paired (IP) state AlOy+:OSO3H-. The sulfonation reactivity of the CB-state sulfonic acid was enhanced, whereas that of the IP-state counterpart was diminished. The incorporation of a minor quantity of aluminum ions (x = 0.1) markedly enhanced the adsorption efficiency of SAs for o-xylene, extending the reaction temperature range to 110-190 °C and increasing the breakthrough adsorption capacity (QB) to 946.1 mg g-1. However, excessive aluminum ion incorporation was detrimental to the adsorption performance of SAs for o-xylene. SA-0.1 showed superior adsorptive capabilities and excellent recyclability, maintaining its performance over four consecutive adsorption/regeneration cycles with only a minor decrease of 4.5%. These findings suggest that SAs prepared with a minor amount of aluminum ions have significant potential for application as adsorbents for the removal of benzene series pollutants.

Biopolymer‑carbonaceous composites, progress, and adsorptive mitigation of water pollutants

Chitin is the second most abundant natural biopolymer, which is composed of N-acetyl glucosamine units linked by β-(1 → 4) Chitosan is an N-deacetylated product of chitin. Properties of chitosan and chitin, such as biocompatibility, non-toxic nature, and biodegradability, make them successful alternatives for energy and environmental applications. However, their low mechanical properties, small surface area, reduced thermal properties, and greater pore volume restrict the potential for adsorption applications. Multiple investigations have demonstrated that these flaws can be prevented by fabricating chitosan and chitin with carbon-based composites. This review presents a comprehensive analysis of the fabrication of chitosan/chitin carbon-based materials. Furthermore, this review examines the prevalent technologies of functionalizing chitosan/chitin biopolymers and applications of chitin and chitosan as well as chitosan/chitin carbon-based composites, in various environmental fields (mitigating diverse water contaminants and developing biosensors). Also, the subsequent regeneration and reuse of adsorbents were also discussed. Finally, we summarize a concise overview of the difficulties and potential opportunities associated with the utilization of chitosan/chitin carbon-based composites as adsorbents to remove water contaminants.

Exploring the environmental pathways and challenges of fluoroquinolone antibiotics: A state-of-the-art review

Fluoroquinolone (FQ) antibiotics have become a subject of growing concern due to their increasing presence in the environment, particularly in the soil and groundwater. This review provides a comprehensive examination of the attributes, prevalence, ecotoxicity, and remediation approaches associated with FQs in environmental matrices. The paper discusses the physicochemical properties that influence the fate and transport of FQs in soil and groundwater, exploring the factors contributing to their prevalence in these environments. Furthermore, the ecotoxicological implications of FQ contamination in soil and aquatic ecosystems are reviewed, shedding light on the potential risks to environmental and human health. The latter part of the review is dedicated to an extensive analysis of remediation approaches, encompassing both in-situ and ex-situ methods employed to mitigate FQ contamination. The critical evaluation of these remediation strategies provides insights into their efficacy, limitations, and environmental implications. In this investigation, a correlation between FQ antibiotics and climate change is established, underlining its significance in addressing the Sustainable Development Goals (SDGs). The study further identifies and delineates multiple research gaps, proposing them as key areas for future investigational directions. Overall, this review aims to consolidate current knowledge on FQs in soil and groundwater, offering a valuable resource for researchers, policymakers, and practitioners engaged in environmental management and public health.

Sustainable triethylenetetramine modified sulfonated graphene oxide/chitosan composite for enhanced adsorption of Pb(II), Cd(II), and Ni(II) ions

A novel sulfonated group and triethylenetetramine modified GO/chitosan (GO-CS) adsorbent (T-SGO-CS) was successfully prepared and utilized for the adsorption of heavy metal ions from single-metal, binary-metal, and ternary-metal solutions. In a single system, the adsorption capacity was 312.28 mg/g for Pb2+, 260.52 mg/g for Cd2+, and 84.61 mg/g for Ni2+, whereas, Adsorption of Pb(II), Cd(II), and Ni(II) in binary and ternary systems was systematically studied. In tertiary systems, the effect of competitive adsorption was more pronounced. In addition, T-SGO-CS exhibited a high adsorption capacity and was recyclable for Pb2+, Cd2+, and Ni2+. T-SGO-CS is a novel and highly efficient adsorbent for omnidirectionally enhancing the adsorption of Pb2+, Cd2+, and Ni2+, as demonstrated by these results. Therefore, T-SGO-CS could be investigated as a potential new material for future applications in heavy metal removal.

The use of agro-waste-based adsorbents as sustainable, renewable, and low-cost alternatives for the removal of ibuprofen and carbamazepine from water

The occurrence of residual pharmaceuticals in the aquatic environment poses major toxicological impacts and adds to the increasing pressure on water resources. Many countries are already suffering from water scarcity, and with the burdening costs of water and wastewater treatment, the race towards innovative sustainable strategies for pharmaceutical remediation is ongoing. Out of the available treatment methods, adsorption proved to be a promising, environmentally friendly technique, particularly when efficient waste-based adsorbents are produced from agricultural residues, thus maximizing the value of wastes, minimizing production costs, and saving natural resources from depletion. Among the residual pharmaceuticals, ibuprofen and carbamazepine are heavily consumed and highly occurring in the environment. This paper aims to review the most recent literature on the application of agro-waste-based adsorbents as sustainable alternatives for the removal of ibuprofen and carbamazepine from contaminated waters. Highlights on the major mechanisms implicated in the adsorption of ibuprofen and carbamazepine are presented, and light is shed on multiple operational parameters that hold a key role in the adsorption process. This review also highlights the effects of different production parameters on adsorption efficiency and discusses many limitations currently encountered. Finally, an analysis is included to compare the efficiency of agro-waste-based adsorbents relative to other green and synthetic adsorbents.

Insight into the adsorptive removal of ibuprofen using porous carbonaceous materials: A review

Over the last decade, the removal of pharmaceuticals from aquatic bodies has garnered substantial attention from the scientific community. Ibuprofen (IBP), a non-steroidal anti-inflammatory drug, is released into the environment in pharmaceutical waste as well as medical, hospital, and household effluents. Adsorption technology is a highly efficient approach to reduce the IBP in the aquatic environment, particularly at low IBP concentrations. Due to the exceptional surface properties of carbonaceous materials, they are considered ideal adsorbents for the IBP removal of, with high binding capacity. Given the importance of the topic, the adsorptive removal of IBP from effluent using various carbonaceous adsorbents, including activated carbon, biochar, graphene-based materials, and carbon nanostructures, has been compiled and critically reviewed. Furthermore, the adsorption behavior, binding mechanisms, the most effective parameters, thermodynamics, and regeneration methods as well as the cost analysis were comprehensively reviewed for modified and unmodified carbonaceous adsorbents. The compiled studies on the IBP adsorption shows that the IBP uptake of some carbon-based adsorbents is significantly than that of commercial activated carbons. In the future, much attention is needed for practical utilization and upscaling of the research findings to aid the management and sustainability of water resource.

Adsorption of tetracycline by Nicandra physaloides (L.) Gaertn seed gum and Nicandra physaloides(L.) Gaertn seed gum/Carboxymethyl chitosan aerogel

In this study, novel aerogels of Nicandra physaloides (L.) Gaertn seed gum (NPG) and Nicandra physaloides (L.) Gaertn seed gum/Carboxymethyl chitosan (NPG/CMC) were prepared by freeze-drying method for removing tetracycline (TC) from water. Scanning electron microscope (SEM), X-ray diffraction (XRD),Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) were used to characterize structure and morphology of NPG and NPG/CMC aerogels. The average pore diameter of NPG and NPG/CMC were 3.04 and 1.2 nm, the specific surface areas were 2.67 and 0.73 m²/g, respectively. The maximum adsorption capacity of NPG and NPG/CMC aerogels for TC based on Langmuir isotherm was 266.7 and 332.23 mg/g respectively. Through thermodynamic and kinetic studies, it was found that the adsorption processes of the two adsorbents were spontaneous and followed the pseudo-second-order kinetic model. And the process of NPG adsorption of TC was endothermic, while NPG/CMC was exothermic.

Remediation of pharmaceutical pollutants using graphene-based materials - A review on operating conditions, mechanism and toxicology

Graphene is a high surface area special carbon compound with exceptional biological, electronic and mechanical properties. Graphene-based materials are potential components used in water treatment on different modes and processes. Ibuprofen and ciprofloxacin are two commonly found pharmaceutical contaminants discharged into water bodies from industrial, domestic and hospital sources. Their concentration levels in water bodies are reported in the range of 1 μg/L to 6.5 mg/L and 0.050-100 μg/L respectively. Their toxic effects pose very high risk to the inhabiting organisms. Their ability to resist biodegradation and capacity to bioaccumulate makes the conventional methods less effective in removal. In the present article, treatment of these compounds via three methods, adsorption, photocatalytic degradation and electro-fenton reactions using graphene-based materials along with the methods adopted for synthesis and treatment are reviewed. The uptakes obtained by graphene-derived adsorbents are presented along with the optimal operating conditions. Studies reported complete removal of ibuprofen from wastewater was achieved at 7 pH for 60 min using graphene membrane as adsorbent and uptake of 99% of ciprofloxacin was exhibited for graphene nanoplates/boron nitrate aerogel at a pH of 7 and 60 min. The reduced graphene oxide surface exhibits higher affinity to light adsorption which leads to the formation of photo generated electrons. The future perspectives for improved applications of graphene-based materials and the research gap currently existing are highlighted.

Sequestration and toxicological assessment of emerging contaminants with polypyrrole modified carboxymethyl cellulose (CMC/PPY): Case of ibuprofen pharmaceutical drug

Ibuprofen (IBU) is a non-steroidal anti-inflammatory drug released into water bodies causing toxic biological effects on living organisms. The current study aims to eliminate IBU from aqueous solutions by a novel carboxymethylcellulose/polypyrrole (CMC/PPY) composite with high removal efficiency. Pyrrole was polymerized to polypyrrole whose average size was about 20 nm on the CMC surface. The maximum removal percentage of IBU by CMC/PPY composite was optimized at initial concentration 10 mg/L, dosage 0.02 g, and pH 7 with adsorption capacity of 72.30 (mg/g) and removal of 83.17 %. IBU adsorption onto CMC/PPY theoretically fits into the Langmuir isotherm and Elovich-kinetic models. Fish and Phytotoxicity assessment were performed with zebrafish and seeds of Vigna mungo (VM) and Vigna radiata (VR). The toxicity study reveals that before adsorption, IBU shows high toxicity towards the zebrafish mortality (33 %), growth inhibition (58.52 % for VM, 60.84 % for VR), and germination (86.66 % for VM and 90 % for VR). As CMC/PPY adsorbs IBU, toxicity drastically decreases. Before adsorption, LC₅₀ was 233.02 mg/L. After adsorption, the LC₅₀ increases to 2325.07 mg/L as IBU molecules get adsorbed by CMC/PPY. These findings show the feasibility of preparing CMC/PPY composite to effectively remove pharmaceutical pollutant IBU from aqueous solutions with their toxicological assessment.

Synthesis of glutaraldehyde-modified silica/chitosan composites for the removal of water-soluble diclofenac sodium

Composite materials are effective adsorbents for the removal of various types of contaminants, such as pharmaceutical products. However, they require improvement to achieve a good adsorption capacity. This study presents the development of a promising adsorbent: silica/chitosan modified with different proportions of glutaraldehyde, which involves the D-glucosamine units from chitosan. The developed materials were evaluated for their ability to remove diclofenac sodium. The adsorption data showed that the diclofenac adsorption efficiency increased with increasing degree of glutaraldehyde crosslinking. The equilibrium and kinetic data were well fit by the Liu and Elovich models, respectively, and the maximum adsorption capacity was 237.8 mg/g. Therefore, it can be assumed that the process is predominantly chemical and exothermic, with a high affinity between the adsorbents and diclofenac sodium. The adsorption mechanisms were investigated to better understand the interactions, and the predominance of covalent bonds with the self-polymerized glutaraldehyde was verified.

Understanding the factors affecting adsorption of pharmaceuticals on different adsorbents - A critical literature update

Remediation of emerging pharmaceutically active compounds (PhACs) as micropollutants in wastewater is of foremost importance as they can cause extremely detrimental effects on life upon bioaccumulation and generation of drug-resistance microorganisms. Presently used physicochemical treatments, such as electrochemical oxidation, nanofiltration and reverse osmosis, are not feasible owing to high operating costs, incomplete removal of contaminants along with toxic by-products formation. Adsorption with the utilization of facile and efficient nanoparticulate adsorbents having distinctive properties of high surface area, excellent adsorption capacity, ability to undergo surface engineering and good regeneration displays great potential in this aspect along with the incorporation of nanotechnology for effective treatment. The application of such nanosorbents provides optimal performance under a wide range of physicochemical conditions, decreased secondary pollution with reduced mechanical stress along with excellent organic compound sequestration capacity, which in turn improves the quality of potable water in a sustainable way compared to current treatments. The present review intends to consolidate the range of factors that affect the process of adsorption of different PhACs on to various nanosorbents and also highlights the adsorption mechanism aiding in the retrieval.

Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview

This review covers the preparation, characterization, and application of magnetic adsorbents obtained from carbon-based sources and their application in the adsorption of both inorganic and organic pollutants from water. Different preparation routes to obtain magnetic adsorbents from activated carbon, biochar, hydrochar, graphene, carbon dots, carbon nanotubes, and carbon nanocages, including the magnetic phase incorporated on the solid surface, are described and discussed. The performance of these adsorbents is analyzed for the removal of fluoride, arsenic, heavy metals, dyes, pesticides, pharmaceuticals, and other emerging and relevant water pollutants. Properties of these adsorbents and the corresponding adsorption mechanisms have been included in this review. Overall, this type of magnetic adsorbents offers an alternative for facing the operational problems associated to adsorption process in water treatment. However, some gaps have been identified in the proper physicochemical characterization of these adsorbents, the development of green and low-cost preparation methods for their industrial production and commercialization, the regeneration and final disposal of spent adsorbents, and their application in the multicomponent adsorption of water pollutants.

Carbon Dots/α-Fe2O3-Fe3O4 nanocomposite: Efficient synthesis and application as a novel electrochemical aptasensor for the ultrasensitive determination of aflatoxin B1

Developing an effective method for the detection of aflatoxin B1 (AFB1) remains an arduous task due to the high toxicity of AFB1 to a health concern. In this study, a sensitive and reliable electrochemical aptasensor based on carbon dots/α-Fe₂O₃-Fe₃O₄ nanocomposite (CDs/α-Fe₂O₃-Fe₃O₄) is constructed for the determination of AFB1. The CDs have good electrical conductivity and large specific surface areas to improve the aptasensor's sensitivity. The α-Fe₂O₃-Fe₃O₄ can not only improve the catalytic performance of the aptasensor but also have magnetism, which can realize the recovery of CDs/α-Fe₂O₃-Fe₃O₄ to avoid material waste and environmental pollution. This electrochemical aptasensor can achieve a good linear (0.001-100.0 nM) and excellent detection limit (0.5 pM) for the determination of AFB1. In addition, the aptasensor was also applied to determine AFB1 in beer, rice, and peanuts, all results were in good agreement with HPLC, indicating that the electrochemical aptasensor has a broad application prospect.

Graphene-Based Materials Immobilized within Chitosan: Applications as Adsorbents for the Removal of Aquatic Pollutants

Graphene and its derivatives, especially graphene oxide (GO), are attracting considerable interest in the fabrication of new adsorbents that have the potential to remove various pollutants that have escaped into the aquatic environment. Herein, the development of GO/chitosan (GO/CS) composites as adsorbent materials is described and reviewed. This combination is interesting as the addition of graphene to chitosan enhances its mechanical properties, while the chitosan hydrogel serves as an immobilization matrix for graphene. Following a brief description of both graphene and chitosan as independent adsorbent materials, the emerging GO/CS composites are introduced. The additional materials that have been added to the GO/CS composites, including magnetic iron oxides, chelating agents, cyclodextrins, additional adsorbents and polymeric blends, are then described and discussed. The performance of these materials in the removal of heavy metal ions, dyes and other organic molecules are discussed followed by the introduction of strategies employed in the regeneration of the GO/CS adsorbents. It is clear that, while some challenges exist, including cost, regeneration and selectivity in the adsorption process, the GO/CS composites are emerging as promising adsorbent materials.

A comparative study of the removal of o-xylene from gas streams using mesoporous silicas and their silica supported sulfuric acids

The three types of silica supported sulfuric acids (SSA), with the same sulfuric acid loading of 9.25 mmol g^-1, were prepared by a wet impregnation method from silica gel (SG), SBA-15 and MCM-41. Characterization of the prepared SSA showed that two anchoring states coexisted for sulfuric acid supported on the surface of the silicas: A physiosorbed (P)-state sulfuric acid; and a chemically bonded (C)-state sulfuric acid. Dynamic adsorption results showed that each SSA had a significant removal capacity for o-xylene gas in the reactive temperature regions. The ranges of the reactive regions were 120-220 °C (SSA/SG), 120-230 °C (SSA/SBA-15) and 120-250 °C (SSA/MCM-41), and this could be attributed to the sulfonation reaction between o-xylene and the anchored sulfuric acid. SSA/MCM-41 showed the highest theoretical breakthrough adsorption capacity (Q_{B, th}, 526.71 mg g^-1) compared with SSA/SBA-15 (363.54 mg g^-1) and SSA/SG (239.15 mg g^-1). Q_{B, th} was closely associated with the amount or proportion of the C-state sulfuric acid on the surface of each SSA. Optimum breakthrough time and Q_{B, th} was obtained by increasing the bed height and decreasing flow rate and inlet concentration. The SSA exhibited excellent recyclability and reuse performance over eight consecutive adsorption/desorption/regeneration cycles. The results suggested that the SSA, especially SSA/MCM-41, might have good potential in applications using adsorbents for the removal of BTEX pollutants.

Enhanced adsorption of sulfonamides by a novel carboxymethyl cellulose and chitosan-based composite with sulfonated graphene oxide

A novel multiple active sites sponge was fabricated from carboxymethyl cellulose (CMC) and genipin crosslinked carboxyalkyl-chitosan (GCC) combined with sulfonated graphene oxide (CMC/SGO-GCC) and used as a material for adsorbing sulfonamide antibiotics. The GO contains a variety of carboxyl and hydroxyl groups, which can interact with the hydroxyl groups of chitosan and CMC to form strong hydrogen bonds. This adsorption process is spontaneous and pH dependent, and shows high sulfamethoxazole (SMX) and sulfapyridine (SPD). Removal efficiency from aqueous solutions. Equilibrium adsorption studies showed that the maximum adsorption capacities of SMX and SPD decreased from 312.28 to 272.83 mg/g and 161.89 to 146.56 mg/g, respectively, as the temperature increased from 298 to 318 K. Reusability experiments indicated that CMC/SGO-GCC maintained a high adsorption capacity for SMX and SPD upon its reuse. This study shows that CMC/SGO-GCC is an ideal material for adsorbing SMX and SPD.

Characterization and deployment of surface-engineered chitosan-triethylenetetramine nanocomposite hybrid nano-adsorbent for divalent cations decontamination

The latency of toxic cations in the ecosystem poses serious ecological problems due to its bioaccumulation potential and toxicity to living organisms. The effective removal of these wastewater cations releasing from multi-industries is a bottleneck issue. Therefore, an attempt has been made to design a suitable sorbent for cations sorption from the aqueous environment. The chitosan biopolymer was modified with triethylenetetramine to incorporate active sites in the polymeric sequence to boost up its cations sorption capacity. Triethylenetetramine molecule anchoring chitosan (CH-TET) was authenticated through elemental assay, Fourier-transform infrared spectroscopy and 13C NMR in solid-state, scanning electron microscopy and thermal analysis. The sorption of lead (1.94 mmol g-1), copper (2.79 mmol g-1) and nickel (1.53 mmol g-1) was carried out using the functionalized chitosan from aqueous solution, which showed higher sorption capacity for lead and copper than the pristine chitosan in terms of Langmuir sorption isotherm. To scrutinize the mechanism of sorption and energy of interaction between sorbent and sorbate, Langmuir, Temkin, and Freundlich isotherm models were used for sorption study. The Langmuir model showed the best fitting to the results based on lower error function values and a higher correlation coefficient (R2). It can be concluded that the triethylenetetramine-modified chitosan might be considered as an effective sorbent for cations removal from industrial wastewater.