Effects of octenyl succinic anhydride groups distribution on the storage and shear stability of Pickering emulsions formulated by modified rice starch

The emulsifying capacity and mechanism of Thesium chinense Turcz. polysaccharides based on synergistic effect of insoluble and soluble fractions

The crude polysaccharides from Thesium chinense Turcz. was fractionated into three streams through alcohol precipitation, namely TPP-20, TPP-40 and TPP-60, with their emulsion stabilizing capacity evaluated in this work. Results showed that, TPP-20 possessed a higher protein content of 11.0 % and the lowest solubility of 60.9 %. TPP-60 demonstrated a stronger ability to reduce the oil-water interfacial tension. The emulsifying performance evaluation revealed an excellent ability of TPP-20 to stabilize the oil-water emulsion, which exhibited superior stability in salt-ion concentrations of 0-500 mM, temperature 4-60 °C and pH 1-11. The microstructure of TPP-20 stabilized emulsion showed that the soluble polysaccharides uniformly distributed in the continuous phase, while the insoluble particles dispersed in both the continuous phase and the oil droplet surface. These two fractions likely cooperated to stabilize the emulsion. Furthermore, the emulsion stabilized by TPP-20 exhibited an excellent ability to inhibit oxidation of its lipids in the emulsion, which is also evidence of the significant stabilizing-emulsion effect of TPP-20.

A novel emulsifier for Pickering emulsion composed of whey protein and OSA-pectin loaded with Monascus pigments

Protein-polysaccharide complex carrier can solve the problem of insufficient stability of Monascus pigments (MPs), a kind of natural pigments, against heat and light. It also has the function to stabilize Pickering emulsion (PE) that can be used as fat replacer in meat products. In this study, heat denatured whey protein (HWP) and pectin modified by octenyl succinic anhydride (OSA-pectin) were prepared into complex by adding Ca2+ loaded with MPs. The complex carrier significantly enhanced the light and heat stabilities of MPs and exhibited excellent wettability. It was then used to prepare PE (HOCM-PE) as a fat replacer to improve the color performance of meat patties. The microstructure and rheological properties of HOCM-PE clarified that the main stable mechanism was to form network structure wrapped around oil droplets in the continuous phase. This structure conferred excellent viscoelasticity and stability to the emulsion. The key quality parameters of meat patties showed that HOCM-PE as a fat substitute was able to maintain the textural properties of the meat patties while providing bright red color. The research provided an ideal dual-functional emulsion for the development of low-fat and low-nitrite meat products.

Evaluation of the performance of low-fat (oil-fat) dressings based on chemically modified Guayabo plantain starch (Musa paradisiaca L.)

Guayabo plantain (GP) starch was chemically modified by acetylation to evaluate its role as a stabilizer and emulsifier in low-fat dressings. Native starch (NS) from GP was chemically modified starch (MS), and its functional properties, such as water absorption index, water solubility index, swelling power, gelatinization temperature (Tg), were evaluated. Additionally, functional groups and morphology were identified using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy. Low-fat dressings were prepared using NS and MS at two concentrations, 2% and 3% (NS2, NS3, MS2, MS3), and the stability of the dressings was evaluated over a storage period of 28 days at 4 °C ± 2.0 °C. The percentage of acetylation and the degree of substitution obtained were 2.48% and 0.01, respectively, complying with current regulations. MS showed a higher amylose content (23.62 ± 1.89%) than NS (16.01 ± 0.43%). The Tg of MS decreased, and the appearance of bands at 1012 and 1723 cm-1 in the FT-IR spectra suggested a modification in the functional characteristics of starch due to acetylation. Emulsions of MS at 2% and 3% (MS2 and MS3) showed a smaller droplet size and higher interfacial dispersion. However, MS3 had higher viscosity, which contributed to an increase in hydrophobicity and delays in flocculation and subsequent coalescence. This research study provides useful information on the use of 3% MS dressings in new food formulations, reducing fat content while preserving functional characteristics, thus ensuring greater stability.

Free-radical-induced grafting of rice starch with gallic acid and evaluation of the reaction products' ability to stabilize Pickering emulsions

Pickering emulsions can be stabilized with native rice starch (NRS), but their hydrophobicity is low. Gallic acid (GA) has a simple molecular structure and a rich variety of functional groups. Pickering emulsions can be made more stable by hydrophobically modifying the esterification reaction of NRS with GA to improve its dual wetting properties. In this study, the free radical-induced grafting method was used to prepare rice starch-GA graft copolymer (NRS-g-GA). The addition of GA could improve the crystallinity and orderliness of NRS. The results of Fourier transform infrared spectroscopy and 1H NMR indicated that GA was successfully grafted onto NRS. After modification, the contact angle of NRS increased from 18.2° to 60.2° (NRS-g-GA; 1:1). The emulsion prepared from NRS-g-GA showed better stability than NRS, improving the emulsification of NRS. Its stable emulsion exhibited an emulsion system dominated by elasticity. Thus, GA could be grafted onto NRS to enhance its emulsifying properties, opening up new applications for GA and NRS and promoting the development of starch-based Pickering emulsions in the future.

Spatially selective catalysis of OSA starch for preparation of Pickering emulsions with high emulsification properties

The traditional strategies of chemical catalysis and biocatalysis for producing octenyl succinic anhydride modified starch can only randomly graft hydrophobic groups on the surface of starch, resulting in unsatisfactory emulsification performance. In this work, a lipase-inorganic hybrid catalytic system with multi-scale flower like structure is designed and applied to spatially selective catalytic preparation of ocenyl succinic anhydride modified starch. With the appropriate floral morphology and petal density, lipases distributed in the "flower center" can selectively catalyze the grafting of hydrophobic groups in a spatial manner, the hydrophobic groups are concentrated on one side of starch particles. The obtaining OSA starch exhibits excellent emulsifying property, and the pickering emulsion has good protective effect on the embedded curcumin. This work provides a direction for the development of high-performance starch-based emulsifiers for the food and pharmaceutical industries, which is of great significance for improving the preparation and emulsification theory research of modified starch.

Physicochemical and functional properties of short-chain fatty acid starch modified with different acyl groups and levels of modification

Rice and quinoa starches are modified with short-chain fatty acids (SCFA) with different SCFA acyl chain lengths and levels of modification. This work is aimed to investigate the impact of modifying rice and quinoa starches with short-chain fatty acids (SCFAs) on various physicochemical properties, including particle size, protein and amylose content, thermal behavior, pasting characteristics, and in vitro digestibility. Both native and SCFA-starches showed comparable particle sizes, with rice starches ranging from 1.58 to 2.22 μm and quinoa starches from 5.18 to 5.72 μm. SCFA modification led to lower protein content in both rice (0.218-0.255 %) and quinoa starches (0.537-0.619 %) compared to their native counterparts. Esterification led to the reduction of gelatinization and pasting temperatures as well as the hardness of the paste of SCFA-starches were reduced while paste clarity increased. The highest level of modification in SCFA-starch was associated with the highest amount of resistant starch fraction. Principal component analysis revealed that modification levels exerted a greater influence on starch properties than the types of SCFA used (acetyl, propionyl, and butyryl). These findings is importance in considering the degree of substitution or level of modification when tailoring starch properties through SCFA modification, with implications for various applications in food applications.

Preparation, characterization and in vitro digestion of octenyl succinic anhydride-modified porous starch with different degrees of substitution

Octenyl succinic anhydride modified porous starch (OSA-PS) with degrees of substitution (DS) from 0.0123 to 0.0427 were prepared by aqueous phase method. From SEM, PS had a porous structure which showed a rough and corrosive surface after esterification with OSA. FT-IR revealed the characteristic peaks of OSA-PS at 1725 cm-1 and 1570 cm-1. From 1H NMR spectra, OSA-PS displayed extra chemical signal peaks at 0.85 ppm, 1.25 ppm and 1.96 ppm. These results fully demonstrated that OSA groups were successfully grafted onto PS. Furthermore, as DS increased, the specific surface area (5.6464 m2/g), pore volume (0.9959 × 10-2 cm3/g) and methylene blue adsorption capacity (24.3962 mg/g) of OSA-PS reached the maximum, while its relative crystallinity (26.8112 %) and maximum thermal decomposition temperature (291.96 °C) were the minimum. In vitro digestion studies showed that with the increase of DS, OSA-PS' contents of rapidly digestible starch and slowly digestible starch decreased from 9.06 % to 6.27 % and 28.38 % to 14.61 %, respectively. In contrast, its resistant starch had an increase in content from 62.56 % to 79.12%. The results provided an effective method for obtaining a double-modified starch with high specific surface area and anti-digestibility, thus broadening the industrial application of starch.

AKD Emulsions Stabilized by Guar Gel: A Highly Efficient Agent to Improve the Hydrophobicity of Cellulose Paper

The aim of the present study was to investigate highly efficient alkyl ketene dimer (AKD) emulsions to improve the hydrophobicity of cellulose paper. AKD emulsions stabilized by guar gel were obtained; the guar gel was prepared by hydrogen bond cross-linking sodium tetraborate and guar gum. The cross-linking was confirmed by combining FTIR and SEM. The effect of guar gel on the performance of the AKD emulsions was also studied by testing AKD emulsions stabilized by different guar gel concentrations. The results showed that with increasing guar gel concentration, the stability of the AKD emulsions improved, the droplet diameter decreased, and the hydrophobicity and water resistance of the sized packaging paper were gradually enhanced. Through SEM, the guar gel film covering the AKD emulsion droplet surface and the three-dimensional structure in the aqueous dispersion phase were assessed. This study constructed a scientific and efficient preparation method for AKD emulsions and provided a new method for the application of carbohydrate polymer gels which may avoid the adverse effect of surfactant on paper sizing and environmental problems caused by surfactant bioaccumulation.

Thymol-loaded Zein-pectin composite nanoparticles as stabilizer to fabricate Pickering emulsion of star anise essential oil for improved stability and antimicrobial activity

The aim of the present study was to prepare a new antimicrobial Pickering emulsion of which the star anise essential oil was added to the oil phase, and to investigate the effect of stabilization by bio-based active nanoparticles consisting of zein and pectin loaded with thymol. First, the thymol-loaded zein/pectin composite nanoparticles (ZTNPs) were fabricated as uniformly distributed spherical nanoparticles with an average diameter of 200 nm through antisolvent precipitation. Second, the effects of nanoparticles' concentration, oil phase ratio, and storage time on the stability of emulsions were explored according to particle size potential, interfacial tension, rheology, and micromorphology. Finally, the antibacterial results showed that Pickering emulsion inhibited Escherichia coli and Staphylococcus aureus compared to the control group by nearly 7 log colony-forming unit/g at 36 h, which was twice as much as the inhibition by thymol or star anise essential oils and ZTNPs. Therefore, the proposed Pickering emulsion with star anise essential oil could be used as a green and safe plant-derived antimicrobial agent in the food industry.

Influence of fatty acid-esterified waxy maize starch type and concentration on stability and properties of oil-in-water emulsions

In the current study, native and different fatty acid-esterified waxy maize starches (octanoate, myristoate, and stearoate), followed by an OSA-potato starch (as an industrial emulsifier) were used to prepare sunflower oil-in-water (O/W) emulsion. The effect of emulsifier type and concentration were evaluated on properties of emulsions in terms of mean droplet size, droplet size distribution, and creaming index. To prepare the emulsion, the emulsifier to oil ratios of 1.25 and 0.5 for octanoate and industrial emulsifier (control) were considered as the selected formulations based on the lowest creaming index (2.63 and 0 %, respectively). The influence of various pHs and ionic strengths on droplet size, span and zeta potential value was similar for both produced emulsions. Therefore, the fatty acid-esterified starch could be suggested as a promising environmentally friendly alternative to industrial emulsifiers for fabrication of emulsions with similar stability.

Tartary Buckwheat Starch Modified with Octenyl Succinic Anhydride for Stabilization of Pickering Nanoemulsions

In this study, Tartary buckwheat starch was modified to different degrees of substitution (DS) with octenyl succinate anhydride (OS-TBS) in order to explore its potential for stabilizing Pickering nanoemulsions. OS-TBS was prepared by reacting Tartary buckwheat starch with 3, 5 or 7% (w/v) octenyl succinate in an alkaline aqueous solution at pH 8.5. Fourier-transform infrared spectroscopy gave peaks at 1726 cm−1 (C=O) and 1573 cm−1 (RCOO−), indicating the formation of OS-TBS. We further studied the physicochemical properties of the modified starch as well as its emulsification capacity. As the DS with octenyl succinate anhydride increased, the amylose content and gelatinization temperature of the OS-TBS decreased, while its solubility increased. In contrast to the original Tartary buckwheat starch, OS-TBS showed higher surface hydrophobicity, and its particles were more uniform in size and its emulsification stability was better. Higher DS with octenyl succinate led to better emulsification. OS-TBS efficiently stabilized O/W Pickering nanoemulsions and the average particle size of the emulsion was maintained at 300–400 nm for nanodroplets. Taken together, these results suggest that OS-TBS might serve as an excellent stabilizer for nanoscale Pickering emulsions. This study may suggest and expand the use of Tartary buckwheat starch in nanoscale Pickering emulsions in various industrial processes.

Effects of octenyl succinylation on the properties of starches with distinct crystalline types and their Pickering emulsions

Effects of octenylsuccinic anhydride (OSA) esterification on the morphology, crystalline structure, and emulsifying properties of three representative starches with different crystalline types, namely waxy corn starch (A-type), potato starch (B-type), and pea starch (C-type) were investigated. XRD patterns testified OSA substitution occurred principally in the amorphous region without affecting the crystalline patterns, whereas SEM verified esterification was mainly a surface phenomenon. However, OSA esterification caused a decrease in the peak intensity and area of small-angle X-ray scattering profiles, indicating the semi-crystalline lamellae ordering was impeded to a certain extent. Compared with A- and C-type starches, B-type starch had a stronger affinity for OSA, as manifested by its higher degree of substitution (DS), graver surface detriment, and depressed order of semi-crystalline lamellae. The emulsifying properties of all starches were pronouncedly improved by OSA modification, especially for A-type starch even with comparatively lower DS. Pickering emulsion stabilized by OSA-modified A-type starch (A-OSAS) with smaller droplet size and more uniform droplet size distribution exhibited more splendiferous stability relative to the other two modified starches. Moreover, rheological tests revealed A-OSAS possessed the highest apparent viscosity and storage modulus (G'), insinuating strong intermolecular interactions between starch granules at the interface and/or in the continuous phase.

Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives

Emulsions are thermodynamically unstable systems that tend to separate into two immiscible phases over time. The interfacial layer formed by the emulsifiers adsorbed at the oil-water interface plays an important role in the emulsion stability. The interfacial layer properties of emulsion droplets have been considered the cutting-in points that influence emulsion stability, a traditional motif of physical chemistry and colloid chemistry of particular significance in relation to the food science and technology sector. Although many attempts have shown that high interfacial viscoelasticity may contribute to long-term emulsion stability, a universal relationship for all cases between the interfacial layer features at the microscopic scale and the bulk physical stability of the emulsion at the macroscopic scale remains to be established. Not only that, but integrating the cognition from different scales of emulsions and establishing a unified single model to fill the gap in awareness between scales also remain challenging. In this review, we present a comprehensive overview of recent progress in the general science of emulsion stability with a peculiar focus on interfacial layer characteristics in relation to the formation and stabilization of food emulsions, where the natural origin and edible safety of emulsifiers and stabilizers are highly requested. This review begins with a general overview of the construction and destruction of interfacial layers in emulsions to highlight the most important physicochemical characteristics of interfacial layers (formation kinetics, surface load, interactions among adsorbed emulsifiers, thickness and structure, and shear and dilatational rheology), and their roles in controlling emulsion stability. Subsequently, the structural effects of a series of typically dietary emulsifiers (small-molecule surfactants,proteins, polysaccharides, protein-polysaccharide complexes, and particles) on oil-water interfaces in food emulsions are emphasized. Finally, the main protocols developed for modifying the structural characteristics of adsorbed emulsifiers at multiple scales and improving the stability of emulsions are highlighted. Overall, this paper aims to comprehensively study the literature findings in the past decade and find out the commonality of multi-scale structures of emulsifiers, so as to deeply understand the common characteristics and emulsification stability behaviour of adsorption emulsifiers with different interfacial layer structures. It is difficult to say that there has been significant progress in the underlying principles and technologies in the general science of emulsion stability over the last decade or two. However, the correlation between interfacial layer properties and physical stability of food emulsions promotes revealing the role of interfacial rheological properties in emulsion stability, providing guidance on controlling the bulk properties by tuning the interfacial layer functionality.

Starches in the encapsulation of plant active ingredients: state of the art and research trends

As a natural polymer, starches and their derivatives have received widespread attention in the cosmetic and pharmaceutical industries, particularly for their use as a coating material. In this sense, as an encapsulating agent, starches stand out, considering the number of compounds that they can trap. Additionally, they provide a nutritional contribution and may improve acceptance by patients. As such, this type of material may serve as an alternative to overcome gaps such as loss of activity of the active principles, low assimilation, or deterioration under environmental and physiological conditions. In this paper, we aim to present the state of the art and research trends on the use of starch as a wall material for the encapsulation of active principles of plant origin. It was found that the most-encapsulated active principles are essential oils and polyphenols; native or modified starches are typically used, either as the sole wall material or in combination with other polymers; and the most widely used methodology is spray drying. The reviewed studies indicate the potential of starches for their use in active ingredient encapsulation processes, improving their viability and expanding their range of applications in different industries, as well as showing a clearly increasing publication trend over the last 10 years.

Graphical abstract

Consolidating the gelling performance of myofibrillar protein using a novel OSA-modified-starch-stabilized Pickering emulsion filler: Effect of starches with distinct crystalline types

Starch-stabilized Pickering emulsions were employed as a novel particulate filler in myofibrillar protein (MP)-based gels for improving the gelling characteristics. The role of emulsions prepared by native starches (NS) with distinctive crystalline types (i.e., A-type waxy corn starch, B-type potato starch, and C-type pea starch) and their OSA-modified counterparts (A-OS, B-OS, C-OS) in the gelling performance was evaluated and compared with MP-stabilized-emulsion. Compared with MP-emulsion, starch-emulsion caused substantial increases in the gelling properties, notably for OSA-starch emulsions. Herein, A-OS exhibited up to 1.26-, 5.3-, and 2.9-fold increments in storage modulus, gel strength, and water holding capacity relative to pure MP gel, respectively, higher than B-OS and C-OS. Moreover, light microscopy evinced a more compact gel network filled with smaller and uniform oil droplets when A-OS emulsions were incorporated into the gels. The addition of OSA-starch emulsions, especially A-OS emulsion, facilitated the protein conformational conversion from α-helix to β-sheet and caused a marked reduction of free sulfhydryls in the gels; yet, the chemical forces that stabilized the gels altered, where remarkable reinforcements in hydrogen bond and hydrophobic interaction were detected, in support of the construction of splendid MP gels. Hence, OSA-starch emulsions show promise as functional components in meat products.

Drying methods affect physicochemical and functional characteristics of Clanis Bilineata Tingtauica Mell protein

Clanis Bilineata Tingtauica Mell Protein (CBTMP) was a kind of natural full-price protein which has a bright application prospect in the food industry. Since the functional properties of protein can be significantly affected by drying method, this study aims to explore the effect of different drying methods, namely freeze drying (FD), vacuum drying (VD),and hot-air drying (HD) on the structure and functional properties of CBTMP. The results showed that the degree of oxidation of CBTMP was found to be in the following order: HD > VD > FD. Functional characteristics revealed that the CBTMP prepared by VD had relatively high foaming ability (150.24 ± 5.34°C) among three drying methods. However, the stability of emulsion and rheological properties prepared by FD was superior to other samples. Differential scanning calorimeter (DSC) showed CBTMP made by HD had the relatively good thermal stability (Tp = 91.49 ± 0.19 °C), followed by VD and FD. Digestive properties reflected that heating treatment could significantly increase its degree of hydrolysis in vitro. To sum up, the research could provide experimental guidance and theoretical support for the preparation method and utilization of CBTMP.

Starch-lauric acid complex-stabilised Pickering emulsion gels enhance the thermo-oxidative resistance of flaxseed oil

Hydrophobic-modified starch complexes have the potential to form Pickering emulsions and improve the oxidative stability of flaxseed oil. Here, V-type starch-lauric acid complexes (SLACs) were fabricated via solid encapsulation within 0.5-12 h and applied in flaxseed oil Pickering emulsions. Complexing index, X-ray diffraction and differential scanning calorimetry analyses confirmed that the degree of complexation increased with the reaction time. Pickering emulsion gels stabilised by SLACs generated with reaction times of 6 h and 12 h exhibited good storage stability and high yield stress, G' values and apparent viscosity. Confocal laser scanning microscopy and cryo-scanning electron microscopy revealed a gelation mechanism involving increased interface roughness and enhanced droplet-droplet interaction. In comparison to pure flaxseed oil, higher thermo-oxidative resistance was observed at 130 °C, with a markedly longer oxidation induction for emulsions and emulsion gels stabilised by SLACs. Our findings could assist in the design of hydrophobic-modified starch and provide a new paradigm for delaying oil oxidation.

Emulsifying properties and bioavailability of clove essential oil Pickering emulsions stabilized by octadecylaminated carboxymethyl curdlan

In the present study, clove essential oil (CEO) Pickering emulsions were stabilized by octadecylamine-modified carboxymethyl curdlan (CMCD-ODA) at different pH values. The droplet size and negatively charged zeta potential of the CMCD-ODA emulsions decreased as the pH increased from 3.0 to 11.0. Rheology results indicated that the CMCD-ODA polymer/emulsion prepared at pH 5.0 showed higher apparent viscosity and viscoelasticity than other pH conditions, which might prevent droplets from flocculating. The Pickering emulsions obtained at pH 5.0 were spherical droplets with a uniform size distribution and a mean diameter of 9.54 μm, and they exhibited excellent stability during 28 days of storage. The morphological structures of the emulsions investigated by confocal laser scanning microscopy and scanning electron microscopy indicated that the CMCD-ODA Pickering emulsion obtained at pH 5.0 was stabilized by loading amphiphilic CMCD-ODA polymer around the spherical oil droplets and forming a weak gel network structure. The CEO-loaded CMCD-ODA emulsions had higher antioxidant capacity than free CEO after 28 days of storage at pH 5.0. Given the good emulsion stability, antioxidant activity, and great antibacterial effect, the CEO-loaded carboxymethyl curdlan Pickering emulsion has promising applications in food, cosmetic, and biomedicine industries.

Preparation of soybean dreg fiber solid emulsifier and its effect on the stability of Pickering emulsion

High purity insoluble dietary fiber (HPIDF) was extracted from Okara by compound enzyme method, and solid emulsifiers with different particle sizes were prepared by wet grinding. Its composition, structure and physicochemical properties were studied, and the influence mechanism of solid emulsifiers with different particle sizes on emulsifying properties and interface stability of Pickering emulsion was systematically studied. The results showed that the particle size of HPIDF decreased significantly, the ζ-potential, contact Angle and swelling capacity of HPIDF ncrease significantly (p < 0.05). HPIDF forms an adsorption layer at the oil-water interface, and some of them are connected to form a bridge network structure, which plays a role of steric hindrance. And the emulsion has excellent stability under different environmental factors. HPIDF are suitable raw materials as natural food-grade solid emulsifiers. It is cost-effective and eco-friendly to realize the high-value utilization of Okara resources, reduce resource waste, and extend the industrial chain.

Dual Modification of Sago Starch via Heat Moisture Treatment and Octenyl Succinylation to Improve Starch Hydrophobicity

To elucidate the pretreatment of a heat moisture treatment that could increase the DS and hydrophobicity of OSA starch, the effect of the moisture level of the HMT process on the physicochemical properties was investigated. The higher moisture content (MC) in the HMT process led to a decreasing degree of crystallinity and gelatinization enthalpy and also produced surface damage and cracking of the granules. HMT pretreatment with the right moisture content resulted in OSA starch with the maximum DS value and reaction efficiency. Pre-treatment HMT at 25% MC (HMT-25) followed by OSA esterification exhibited the highest DS value (0.0086) and reaction efficiency (35.86%). H25-OSA starch has been shown to have good water resistance (OAC 1.03%, WVP 4.92 × 10-5 g/s m Pa, water contact angle 88.43°), and conversely, has a high cold water solubility (8.44%). Based on FTIR, there were two new peaks at 1729 and 1568 cm-1 of the HMT-OSA starch, which proved that the hydroxyl group of the HMT starch molecule had been substituted with the carbonyl and carboxyl ester groups of OSA.

Preparation and characterization of octenyl succinic anhydride modified waxy maize starch hydrolyzate/chitosan complexes with enhanced interfacial properties

The preparation and characterization of colloidal complexes based on octenyl succinic anhydride starch hydrolyzate (OSAS) and chitosan (CS) were conducted. Results showed that OSA-S/CS ratio (r) and pH significantly affected complex turbidities and yields. The highest turbidity and yield were obtained at r = 6:1 when pH was fixed, and at pH 6.5 when r was fixed. All complexes remained liquid-like except that formed at pH 6.5, which exhibited a gel structure due to the strongest complexation. OSA-S/CS complexes had intertwined core-shell microstructure and exhibited electrostatic interactions between COO^- and NH₃⁺ groups of OSA-S and CS, respectively. The complexes prepared at r = 6:1 and pH 6.0 exhibited the most suitable wettability (θ_ow = 91.97°) and interfacial adsorption dynamics. The compact lamellar network and intact cores of these complexes were also shown. This work provides profound and comprehensive information about the formation and physicochemical properties of OSA-S/CS complexes.

Synergistic stabilization of oil in water emulsion with chitin particles and tannic acid

The aim of the present study was to explore the effect of CP and TA on stability of oil in water emulsion stabilized by the two components, so as to fabricate the most efficient chitin based emulsifying agents. It was found that there was synergistic effect for CP and TA in stabilizing emulsion, specifically, the complex of chitin particles (CP) (3 g/L) with tannic acid (TA) (2 g/L) produced the most physically and oxidatively stable oil-in-water emulsion compared with other groups in this study. This is because CP-TA (3/5) complex had the lowest zeta potential, the lowest the oil water interfacial tension, the highest viscosity and the highest content of TA with excellent antioxidant activity. Furthermore, this is because there was intense interaction between CP and TA in CP-TA complex from results of FTIR, XRD and ITC, which then result in the formation of large CP-TA particles.

Removal of a cationic dye from aqueous solution by a porous adsorbent templated from eco-friendly Pickering MIPEs using chitosan-modified semi-coke particles

Porous materials prepared from high internal phase emulsions have been attracting much attention in recent years, but two major defects related to the high consumption of organic solvent and surfactants are always difficult to solve.

Tannic acid enhanced the physical and oxidative stability of chitin particles stabilized oil in water emulsion

In this work, the stability of CP-TA complex stabilized emulsion was first characterized. It was found that the peak thickness, Turbiscan Stability Index (TSI) and droplet size of CP-TA complex stabilized emulsion gradually decreased with increasing content of TA, indicating the gradually enhanced physical stability of emulsion, which was attributed to the gradually decreased interfacial tension, zeta potential and increased viscosity of CP-TA complex. Moreover, the oxidative stability of CP-TA complex stabilized emulsion gradually enhanced with increasing of TA content due to the antioxidant activity of TA. XRD and FTIR results suggested that the interaction between CP and TA gradually enhanced with increasing content of TA in CP-TA complex, leading to the formation of larger CP-TA clusters shown in AFM results. In conclusion, the presence of tannic acid (TA) enhanced the physical and oxidative stability of chitin particles-tannic acid (CP-TA) complex stabilized oil in water emulsion.

Modified chicha gum by acetylation for antimicrobial and antiparasitic applications: Characterization and biological properties

It was developed a material to act as an antimicrobial and antiparasitic agent through a modification reaction in the gum structure extracted from the plant Sterculia striata. This material was characterized, the oxidant activity was evaluated and the antimicrobial activity against Candida albicans, Escherichia coli, Pseudomonas aeruginosa, Salmonella Typhimurium and Klebsiella pneumoniae was investigated, in addition to the effect against Leishmania amazonensis, testing its acute toxicity and its cytotoxicity in human cells. Characterization techniques proved the success of chemical modification. The modification led to an increase in antioxidant activity, with excellent antibacterial activity, reaching almost 100% inhibition for P. aeruginosa and S. Typhimurium, and inhibitory effect above 70% against L. amazonensis, with an affinity far superior to the parasite than macrophages. The derivative showed no acute toxicity, it was non-hemolytic, increased cell viability in macrophages and fibroblasts, and stimulated cell proliferation of keratinocytes, thus being a strong candidate to be used as an antimicrobial and antiparasitic agent in biomedical applications.

Recent advances in polysaccharides stabilized emulsions for encapsulation and delivery of bioactive food ingredients: A review

Many bioactive food ingredients were encapsulated in different forms to improve their stability and bioavailability. Emulsions have showed excellent properties in encapsulation, controlled release, and targeted delivery of bioactives. Polysaccharides are widely available and have different structures with different advantages including non-toxic, easily digested, biocompatible and can keep stable over a wide range of pH and temperatures. In this review, the most common polysaccharides and polysaccharide based complexes as emulsifiers to stabilize emulsions in recent ten years are described. The close relationships between the types and structures of polysaccharides and their emulsifying capacities are discussed. In addition, the absorption and bioavailability of bioactive food components loaded in polysaccharide stabilized emulsions are summarized. The main goal of the review is to emphasize the important roles of polysaccharides in stabilizing emulsions. Moreover, speculations regarded to some issues for the further exploration and possible onward developments of polysaccharides stabilized emulsions are also discussed.