Robust, sustainable cellulose composite aerogels with outstanding flame retardancy and thermal insulation

Dual chemical crosslinking strategy to fabricate lightweight, flame-retardant, high-modulus and hydrophobic cellulose cryogel

Cellulose cryogel shows great application potential as a thermal insulation material because of its eco-friendliness, lightweight, high porosity and highly-efficient thermal insulation property. However, the high flammability and hydrophilicity have become bottlenecks to restrict its application in the thermal insulation field. Herein, we synthesized an amylose derivative with ammonium phosphate groups (AM), and reported a dual chemical crosslinking strategy to fabricate lightweight, flame-retardant, high-modulus and hydrophobic cellulose cryogel with AM and methyltrimethoxysilane (MTMS) via baking-crosslinking and chemical vapor deposition techniques. The dual crosslinking structure endowed the composite cryogel (AM30Si) with a high specific modulus of 47.0 MPa/(g/cm3), which enabled it to sustain 12,500 times its own weight. The thermal conductivity of AM30Si was only 28.7 mW/(m·K), which benefited from its anfractuous three-dimensional porous network structure. The P/N/Si synergy enhanced the flame retardancy of AM30Si, and its UL-94 rating and LOI value reached V-0 and 39.2%, respectively. Moreover, AM30Si possessed satisfactory hydrophobicity, oil absorption and continuous oil-water separation ability. This study provides not only an insight into the syntheses of reactive polysaccharide derivatives with high flame-retardant activity, but also an innovative solution to simultaneously address the inflammability, hydrophilicity and inadequate strength of cellulose cryogel while largely maintaining its lightweight feature.

Reinforcement strategies for cellulose-based aerogels from textile waste and their applications in thermal insulation and oil absorption

The valorization of cellulose-based textile waste into high-value aerogels holds great promise for sustainable development. However, their practical application is hindered by insufficient mechanical properties. In this work, three-dimensional porous aerogels were synthesized from waste cotton and viscose using dissolution-regeneration and freeze-drying. Reinforcing polyester fibers and optimizing cotton-viscose ratios significantly enhanced mechanical performance. Compared to 3 wt% pure viscose fiber (V3), incorporating 1.5 wt% polyester (V3P1.5) increased compressive stress and modulus by 2.7 and 13.2 times, respectively. Similarly, a cotton-viscose hybrid (C2V1) exhibited 2.3- and 13.1-fold improvements. These enhancements stemmed from polyester fiber reinforcement and heterogeneous crosslinking networks, strengthening structural integrity. The aerogels maintained excellent thermal insulation (0.0336-0.0436 W·m-1·K-1) and exhibited outstanding cyclic stability in oil-water separation, retaining over 80 % of their initial absorption capacity after 25 cycles. This work provides a scalable strategy for high-performance sustainable aerogels and paves the way for recycling cellulose-based textile waste into high-value-added products, contributing to a more sustainable environmental impact.

Review on the application of biomass-based aerogels in the field of thermal insulation

The continuous progression of industrialisation and the burgeoning global population have precipitated the non-renewable energy crisis and exacerbated environmental problems, thereby stimulating a huge demand for production of environmentally friendly materials. Typically, biomass-based aerogels (BAs) derived from cellulose, chitosan (CS), lignin, and alginate have been gradually captivating the attention of researchers owing to their high specific surface area, substantial porosity, low density, porous architecture, and biodegradability. In this review, we demonstrate the sustainability of BAs by contrasting the overall advantages or disadvantages of BAs with those of synthetic alternatives in terms of cost, insulation performance, and planetary boundaries. In addition, the aerogels based on biomass in recent years are summarized, including thermal insulation mechanisms, the raw materials, test methods, preparation approaches (focusing on the use of crosslinking and drying methods in the preparation process), as well as the wide-ranging applications. Furthermore, we offer the incisive insights into the challenges and prospective opportunities for BAs. The up-to-date summary and discussion will be beneficial to the development of functional BAs, which can improve resource utilization efficiency, thereby catalyzing the advancement of green technology.

Cellulose-based delivery systems for bioactive ingredients: A review

Considering the outstanding advantages including abundant resources, structure-performance designability, impressive mechanical strength, and 3D network structure-forming ability, cellulose is an ideal material for encapsulating bioactive ingredients. Due to its low solubility in water, large-scaled morphology and poor flexibility, cellulose is unsuitable for the construction of carriers. Consequently, the majority of cellulose is employed following physical or chemical modification. Cellulose and its derivatives are extensively employed in the food industry, including fat replacement, food packaging composites, food additives, 3D-printed food and delivery systems. Their benefits in food delivery systems are particularly pronounced. Therefore, the distinguishing features, preparation methods, recent developments and effectiveness of different cellulose-based delivery systems for bioactive ingredients are discussed. Cellulose-based delivery systems offer unique advantages in terms of environmental impact reduction, modification facilitation, stimuli-responsive release as well as tailored design, and their application has gained widespread recognition. However, they are facing challenges in the application process comprising modification methods for cellulose-based materials, new methods for commercial preparation on a wide scale, cellulose-based multifunctional conveyance systems and systematic evaluation using in vivo experiments. In conclusion, this review provides theoretical references for the development of novel delivery carriers as well as the efficient application and popularization of cellulose-based delivery systems.

"Brick-Mortar-Binder" Design toward Highly Elastic, Hydrophobic, and Flame-Retardant Thermal Insulator

Advanced aerogels hold immense potential in thermal insulation. However, achieving high environmental adaptability aerogel insulators with elasticity, hydrophobicity, flame-retardancy, and low temperature tolerance remains a significant challenge. Inspired by a "brick-mortar-binder" biomimetic texture, a layered double hydroxide/carboxylated cellulose nanofibers/Si-O-Si (LCS) hybrid aerogel is developed by bottom-up freeze-drying. Owing to the distinct building blocks and organized structure, as-prepared LCS hybrid aerogel exhibits impressive mechanical elasticity, cycling stability at an extremely low temperature (-196 °C), hydrophobicity, and flame-retardancy (LOI = 44.6%, UL-94: V-0). Additionally, the incorporation of layered double hydroxide effectively improves the thermal insulation property (thermal conductivity = 0.0296 W·m-1·K-1). These distinctive features make the LCS hybrid aerogel highly promising for thermal management applications in extreme conditions, such as in pipelines for transporting liquid nitrogen and liquefied natural gas.

Fire-Safe Aerogels and Foams for Thermal Insulation: From Materials to Properties

The ambition of human beings to create a comfortable environment for work and life in a sustainable way has triggered a great need for advanced thermal insulation materials in past decades. Aerogels and foams present great prospects as thermal insulators owing to their low density, good thermal insulation, mechanical robustness, and even high fire resistance. These merits make them suitable for many real-world applications, such as energy-saving building materials, thermally protective materials in aircrafts and battery, and warming fabrics. Despite great advances, to date there remains a lack of a comprehensive yet critical review on the thermal insulation materials. Herein, recent progresses in fire-safe thermal-insulating aerogels and foams are summarized, and pros/cons of three major categories of aerogels/foams (inorganic, organic and their hybrids) are discussed. Finally, key challenges associated with existing aerogels are discussed and some future opportunities are proposed. This review is expected to expedite the development of advanced aerogels and foams as fire-safe thermally insulating materials, and to help create a sustainable, safe, and energy-efficient society.

Preparation of phosphorus-nitrogen synergistic flame retardant cellulose composite aerogel from waste cotton/phytic acid/acrylamide

Cellulose aerogel is a green and biodegradable material, but the high flammability of cellulose aerogel hinders its development. In order to expand the application range of cellulose aerogel, it is necessary to improve the flame retardancy of cellulose aerogel. In this paper, cellulose hydrogels were prepared by decolorizing waste cotton fabrics (WCF) and dissolving them in 1-butyl-3-methylimidazole chloride salt ([Bmim]Cl)/DMSO. The cellulose hydrogels were impregnated in aqueous phytic acid (PA)/acrylamide (AM) solution for a period of time and then heated and treated. A cellulose composite aerogel with excellent flame retardant properties was successfully prepared by using in situ polymerization. The results show that the cellulose composite aerogel has a porous structure and good thermal stability, and the residual carbon content in the air at 800 °C is >2.86 %. At the same time, it has excellent flame retardancy, the ultimate oxygen index (LOL) is >40, and the vertical combustion carbon length is <3.5 cm. The thermal insulation performance has also been improved, and the composite aerogel with a height of 1 cm has a temperature difference of 40.2 °C between the upper and lower surfaces on the 80 °C heating table.

Double cross-linked biomass aerogels with enhanced mechanical strength and flame retardancy for construction thermal insulation

Biomass aerogels are expected to be a popular material in construction field due to their sustainability, eco-friendliness and excellent thermal insulation properties. In this paper, high modulus biomass aerogels based on the principle of double cross-linking of physics and chemistry were synthesized by freeze-drying technique using gelatin, sodium carboxymethyl cellulose, glutaraldehyde, phytic acid and diatomite as raw materials. The presence of a double cross-linked network structure endowed the prepared aerogels with a low thermal conductivity (0.021-0.029 W·m-1·k-1). The density of only 0.0865 g·cm-3 biomass aerogel exhibited an extrastrong compression modulus of 31.5 MPa, which was superior to common biomass aerogels. Biomass intumescent flame retardant system composed of sodium carboxymethyl cellulose (carbon source), gelatin (gas source) and phytic acid (acid source) was used in combination with diatomite to enhance flame retardancy (limit oxygen index value up to 36.5 %, UL-94 V-0 rating and total smoke production reduced from 0.31 m2 to 0.18 m2) and thermal stability (the residue up to 48.91 %). Remarkably, the modified aerogel showed incredible hydrophobicity (hydrophobic angle of 137°). In summary, the results indicated this study proposed a novel green idea for the preparation of construction thermal insulation materials with a combination of high modulus, flame retardancy and hydrophobicity.

Lightweight, ultrahigh-strength and flame-retardant cellulose aerogel crosslinked with a reactive P/N-rich curdlan derivative

Cellulose aerogel, recognized for its eco-friendliness, bio-sustainability and excellent thermal insulation property, holds immense potential as an insulation material. However, the application of cellulose aerogel has been hindered by its inherent drawbacks, particularly its low strength and flammability. In this study, a reactive P/N-rich curdlan derivative (NT) was synthesized and characterized. Lightweight, ultrahigh-strength and flame-retardant composite aerogels were then prepared by slow freezing, freeze-drying and chemical crosslinking methods. Composite aerogel crosslinked with 30% NT exhibited exceptional thermal insulation property with a low thermal conductivity of 33.9 mW/(m·K), which rivaled the value of petroleum-based thermal insulation materials. It possessed an ultrahigh compressive modulus (0.786 MPa) at low density (21.6 mg/cm3), which supported >12,000 times its weight. It also displayed superior flame-retardant property, with a limiting oxygen index of up to 33.1% and a V-0 rating in the UL-94 test. This study provides a new insight into the high-value utilization of natural polysaccharide and an innovative solution to the problem of low strength and flammability of cellulose aerogel. Cellulose aerogels with ultrahigh strength, superior flame retardancy and thermal insulation property possess a promising application in the fields of construction, aerospace and thermal protective clothing as high-performance thermal insulation materials.

In-situ polymerization of phosphorus/nitrogen flame-retardant coating for polyester/cotton blend fabrics with superior durability

The durable flame-retardant functional coating of polyester/cotton (T/C) blend fabrics is both interesting and challenging. In this study, a novel in-situ polymerization strategy for phosphorus/nitrogen-based flame-retardant on T/C blend samples was developed through the polycondensation of tetramethylolphosphonium sulfate, dicyandiamide, and anionic cyclic phosphate ester. The chemical structure of the polycondensation compounds, as well as the surface morphology, combustion behavior, flame-retardant capacity, washing durability and flame-retardant mechanism of the coated T/C blend fabrics, were investigated. The coated T/C blend fabrics demonstrated excellent self-extinguishing performance, with the damaged length decreasing to as low as 8.0 cm and the LOI reaching 28 %. Moreover, the peak heat release rate of the coated T/C blend fabrics decreased by 39.7 %. The superior flame retardancy can be attributed to the enhanced dehydration and carbonization by phosphate groups in the condensed phase, as well as the quenching effect and diluting effect in the gas phase. Additionally, the coated T/C blend fabrics exhibited remarkable washing durability and still achieved self-extinguishing after 65 washing cycles, and the in-situ deposition of insoluble three-dimensional polycondensation compounds onto the T/C blend fabrics was beneficial. The flame-retardant coating had a minor impact on the whiteness, tensile strength and breathability of the T/C blend fabrics.

Mullite-Fibers-Reinforced Bagasse Cellulose Aerogels with Excellent Mechanical, Flame Retardant, and Thermal Insulation Properties

Cellulose aerogels are considered as ideal thermal insulation materials owing to their excellent properties such as a low density, high porosity, and low thermal conductivity. However, they still suffer from poor mechanical properties and low flame retardancy. In this study, mullite-fibers-reinforced bagasse cellulose (Mubce) aerogels are designed using bagasse cellulose as the raw material, mullite fibers as the reinforcing agent, glutaraldehyde as the cross-linking agent, and chitosan as the additive. The resulted Mubce aerogels exhibit a low density of 0.085 g/cm3, a high porosity of 93.2%, a low thermal conductivity of 0.0276 W/(m∙K), superior mechanical performances, and an enhanced flame retardancy. The present work offers a novel and straightforward strategy for creating high-performance aerogels, aiming to broaden the application of cellulose aerogels in thermal insulation.

Advances in regenerated cellulosic aerogel from waste cotton textile for emerging multidimensional applications

Rapid development of society and the improvement of people's living standards have stimulated people's keen interest in fashion clothing. This trend has led to the acceleration of new product innovation and the shortening of the lifespan for cotton fabrics, which has resulting in the accumulation of waste cotton textiles. Although cotton fibers can be degraded naturally, direct disposal not only causes a serious resource waste, but also brings serious environmental problems. Hence, it is significant to explore a cleaner and greener waste textile treatment method in the context of green and sustainable development. To realize the high-value utilization of cellulose II aerogel derived from waste cotton products, great efforts have been made and considerable progress has been achieved in the past few decades. However, few reviews systematically summarize the research progress and future challenges of preparing high-value-added regenerated cellulose aerogels via dissolving cotton and other cellulose wastes. Therefore, this article reviews the regenerated cellulose aerogels obtained through solvent methods, summarizes their structure, preparation strategies and application, aimed to promote the development of the waste textile industry and contributed to the realization of carbon neutrality.

Anisotropic composite aerogel with thermal insulation and flame retardancy from cellulose nanofibers, calcium alginate and boric acid

With the increasing severity of energy shortages and environmental pollution, there is an urgent need for advanced thermal insulation materials with excellent comprehensive performance, including low thermal conductivity, high flame resistance, and strong compressive strength. Herein, an anisotropic composite aerogel based on cellulose nanofibers (CNF), calcium alginate (CA), and boric acid (BA) is fabricated using a directional freeze-drying strategy. The CA and BA, as double cross-linking agents, associated with oriented porous structure provide the resultant aerogel with good mechanical strength. Additionally, self-flame retardant CA and BA act as synergistic flame retardants that endow the aerogel with excellent flame retardance properties such as a limiting oxygen index value of 44.2 %, UL-94 V-0 rating, and low heat release. Furthermore, this composite aerogel exhibits outstanding thermal insulation performance with a low thermal conductivity of approximately 30 mW m-1 K-1. Therefore, the composite aerogel is expected to have a wide potential application in areas such as construction, automotive industry, batteries, petrochemical pipelines, and high-temperature reaction devices.

Mechanically Strengthened Aerogels through Multiscale, Multicompositional, and Multidimensional Approaches: A Review

In recent decades, aerogels have attracted tremendous attention in academia and industry as a class of lightweight and porous multifunctional nanomaterial. Despite their wide application range, the low mechanical durability hinders their processing and handling, particularly in applications requiring complex physical structures. "Mechanically strengthened aerogels" have emerged as a potential solution to address this drawback. Since the first report on aerogels in 1931, various modified synthesis processes have been introduced in the last few decades to enhance the aerogel mechanical strength, further advancing their multifunctional scope. This review summarizes the state-of-the-art developments of mechanically strengthened aerogels through multicompositional and multidimensional approaches. Furthermore, new trends and future directions for as prevailed commercialization of aerogels as plastic materials are discussed.

Sustainable lignocellulose aerogel for air purifier with thermal insulation, flame retardancy, mechanical strength, and its life cycle assessment

High-performance biomass materials with good thermal insulation, flame retardrancy, and mechanical properties are urgently required for thermal management. Herein, a novel lignocellulose aerogel treated using a recyclable deep eutectic solvent (DES) was physically mixed with tourmaline particles (TPs) to enhance its structural stability, flame retardancy, and mechanical properties. The optimized TPs-modified lignocellulose aerogel (TLA-4) had good comprehensive performances due to the synergistic effect of ammonium sulfate and TPs. Compared with TPs-free lignocellulose aerogel (LA), the total heat release (THR) and heat release rate (HRR) of TLA-4 were reduced by 62.0 % and 66.3 %, respectively, and the limiting oxygen index (LOI) of TLA-4 was drastically enhanced by 74.1 %. TLA-4 also exhibited a low thermal conductivity of 29.67 mW/mK, showing favorable thermal insulation performance. When compressed to 5 %, the mechanical strength of TLA-4 increased by 8.3 times. Meanwhile, the presence of TPs and abundant pores in the aerogel contributed to the release of negative oxygen ions (NOIs), aiding air purification. A life cycle assessment (LCA) indicated that this composite had a minimal environmental impact (EI) in 17 categories compared to other similar aerogels. The proposed strategy for preparing an environment-friendly lignocellulose aerogel offers significant potential for applications in home decoration and building materials.

Ultrastrong lightweight nanocellulose-based composite aerogels with robust superhydrophobicity and durable thermal insulation under extremely environment

Ultra-lightweight porous aerogels based on nanocellulose (NC) have promising applications in various fields such as building insulation, sewage treatment, energy storage, and aerospace. One of the key advantages of these aerogels is their exceptionally low thermal conductivity. Nevertheless, the thermal insulation of NC aerogel (NCA) can deteriorate with changes in temperature and humidity conditions, making it crucial to develop a bulk aerogel that can maintain exceptional thermal insulating properties in harsh environmental conditions. A sustainable and user-friendly approach to synthesizing cellulose/poly(vinyl alcohol) aerogel (CellPA) materials has been developed, which are lightweight, possess good insulating properties, and demonstrate robust superhydrophobicity even in harsh environmental conditions. The CellPA are both exceptionally lightweight and robust, boasting outstanding resistance to combustion while also displaying a thermal conductivity of 36.1 mW m-1 K-1, suggesting they hold great promise for insulation applications. Furthermore, CellPA also exhibits robust superhydrophobicity even under harsh conditions, confirming the homogenous superhydrophobic modification of the biodegradable PVA through chemical methods. The manufacturing of bio-based composite materials with enhanced mechanical and thermal insulation features has gained immense popularity in a broad spectrum of contemporary engineering applications. These composite materials are particularly valuable as a robust, energy-efficient, lightweight, waterproof and flameproof for construction materials.

High-yield and scalable cellulose nanomesh preparation via dilute acid vapor and enzymatic hydrolysis-mediated nanofabrication

Nanocellulose has received considerable attention in diverse research fields owing to its unique nanostructure-mediated physicochemical properties. However, classical acid hydrolysis usually destroys the microstructural integrity of cellulose, leading to the violent dissociation of cellulose into low-dimensional nanofibers and limiting the formation of intact structures with high specific surface areas. Herein, we have optimized the methodology of dilute acid vapor hydrolysis combined with the enzymatic hydrolysis (DAVE) method and investigated the pore formation mechanism of cellulose nanomesh (CNM). Benefiting from the selective nano-engraving effect of hydrochloric acid vapor on the amorphous region of cellulose followed by widening of the three-dimensional nanopores using enzymatic hydrolysis, confirmed by topographic, spectroscopic, and crystallographic tests, the as-prepared CNM, significantly different from the existing nanocellulose, exhibited improved specific surface area (98.37 m2/g), high yield (88.5 %), high crystallinity (73.4 %), and excellent thermal stability (375.4 °C). The proposed DAVE approach may open a new avenue for nanocellulose manufacturing.

Multifunctional cellulose-based aerogel for intelligent fire fighting

Multifunctional biomass-based aerogels with mechanically robust and high fire safety are urgently needed for the development of environmentally-friendly intelligent fire fighting but challenging. Herein, a novel polymethylsilsesquioxane (PMSQ)/cellulose/MXene composite aerogel (PCM) with superior comprehensive performance was fabricated by ice-induced assembly and in-situ mineralization. It exhibited light weight (16.2 mg·cm-3), excellent mechanical resilience, and rapidly recovered after being subjected to the pressure of 9000 times of its own weight. Moreover, PCM demonstrated outstanding thermal insulation, hydrophobicity and sensitive piezoresistive sensing. In addition, benefiting from the synergism of PMSQ and MXene, PCM displayed good flame retardancy and improved thermostability. The limiting oxygen index of PCM was higher than 45.0 %, and it quickly self-extinguished after being removed away from fire. More importantly, the rapid electrical resistance reduction of MXene at high temperature endowed PCM with sensitive fire-warning capability (trigger time was less than 1.8 s), which provided valuable time for people to evacuate and relief. This work provides new insights for the preparation and application of the next-generation high performance biomass-based aerogels.

Thermal Insulation Mechanism, Preparation, and Modification of Nanocellulose Aerogels: A Review

Energy problems have become increasingly prominent. The use of thermal insulation materials is an effective measure to save energy. As an efficient energy-saving material, nanocellulose aerogels have broad application prospects. However, nanocellulose aerogels have problems such as poor mechanical properties, high flammability, and they easily absorbs water from the environment. These defects restrict their thermal insulation performance and severely limit their application. This review analyzes the thermal insulation mechanism of nanocellulose aerogels and summarizes the methods of preparing them from biomass raw materials. In addition, aiming at the inherent defects of nanocellulose aerogels, this review focuses on the methods used to improve their mechanical properties, flame retardancy, and hydrophobicity in order to prepare high-performance thermal insulation materials in line with the concept of sustainable development, thereby promoting energy conservation, rational use, and expanding the application of nanocellulose aerogels.

Bioactive Absorbent Chitosan Aerogels Reinforced with Bay Tree Pruning Waste Nanocellulose with Antioxidant Properties for Burger Meat Preservation

As a transition strategy towards sustainability, food packaging plays a crucial role in the current era. This, carried out in a biorefinery context of agricultural residues, involves not only obtaining desirable products but a comprehensive utilization of biomass that contributes to the circular bioeconomy. The present work proposes the preparation of bioactive absorbent food pads through a multi-product biorefinery approach from bay tree pruning waste (BTPW). In a first step, chitosan aerogels reinforced with lignocellulose and cellulose micro/nanofibers from BTPW were prepared, studying the effect of residual lignin on the material's properties. The presence of micro/nanofibers improved the mechanical performance (up to 60%) in addition to increasing the water uptake (42%) when lignin was present. The second step was to make them bioactive by incorporating bay leaf extract. The residual lignin in the micro/nanofibers was decisive, since when present, the release profiles of the extract were faster, reaching an antioxidant power of more than 85% after only 30 min. Finally, these bioactive aerogels were used as absorbent pads for fresh meat. With the use of the bioactive aerogels (with ≥2% extract), the meat remained fresh for 10 days as a result of delayed oxidation of the food during storage (20% metmyoglobin proportion).

An All-Natural Wood-Inspired Aerogel

The oriented pore structure of wood endows it with a variety of outstanding properties, among which the low thermal conductivity has attracted researchers to develop wood-like aerogels as excellent thermal insulation materials. However, the increasing demands of environmental protection have put forward new and strict requirements for the sustainability of aerogels. Here, we report an all-natural wood-inspired aerogel consisting of all-natural ingredients and develop a method to activate the surface-inert wood particles to construct the aerogel. The obtained wood-inspired aerogel has channel structure similar to that of natural wood, endowing it with superior thermal insulation properties to most existing commercial sponges. In addition, remarkable fire retardancy and complete biodegradability are integrated. With the above outstanding performances, this sustainable wood-inspired aerogel will be an ideal substitute for the existing commercial thermal insulation materials.

Wood-Derived Functional Polymeric Materials

In recent years, tremendous efforts have been dedicated to developing wood-derived functional polymeric materials due to their distinctive properties, including environmental friendliness, renewability, and biodegradability. Thus, the uniqueness of the main components in wood (cellulose and lignin) has attracted enormous interest for both fundamental research and practical applications. Herein, the emerging field of wood-derived functional polymeric materials fabricated by means of macromolecular engineering is reviewed, covering the basic structures and properties of the main components, the design principle to utilize these main components, and the resulting wood-derived functional polymeric materials in terms of elastomers, hydrogels, aerogels, and nanoparticles. In detail, the natural features of wood components and their significant roles in the fabrication of materials are emphasized. Furthermore, the utilization of controlled/living polymerization, click chemistry, dynamic bonds chemistry, etc., for the modification is specifically discussed from the perspective of molecular design, together with their sequential assembly into different morphologies. The functionalities of wood-derived polymeric materials are mainly focused on self-healing and shape-memory abilities, adsorption, conduction, etc. Finally, the main challenges of wood-derived functional polymeric materials fabricated by macromolecular engineering are presented, as well as the potential solutions or directions to develop green and scalable wood-derived functional polymeric materials.

Thermally Insulating Nanocellulose-Based Materials

Thermally insulating materials based on renewable nanomaterials such as nanocellulose could reduce the energy consumption and the environmental impact of the building sector. Recent reports of superinsulating cellulose nanomaterial (CNM)-based aerogels and foams with significantly better heat transport properties than the commercially dominating materials, such as expanded polystyrene, polyurethane foams, and glass wool, have resulted in a rapidly increasing research activity. Herein, the fundamental basis of thermal conductivity of porous materials is described, and the anisotropic heat transfer properties of CNMs and films with aligned CNMs and the processing and structure of novel CNM-based aerogels and foams with low thermal conductivities are presented and discussed. The extraordinarily low thermal conductivity of anisotropic porous architectures and multicomponent approaches are highlighted and related to the contributions of the Knudsen effect and phonon scattering.

Layered Double Hydroxide Modified Bone Cement Promoting Osseointegration via Multiple Osteogenic Signal Pathways

Poly(methyl methacrylate) (PMMA) bone cement has been widely used in orthopedic surgeries including total hip/knee replacement, vertebral compression fracture treatment, and bone defect filling. However, aseptic loosening of the interface between PMMA bone cement and bone often leads to failure. Hence, the development of modified PMMA that facilitates the growth of bone into the modified PMMA bone cement is key to reducing the incidence of aseptic loosening. In this study, MgAl-layered double hydroxide (LDH) microsheets modified PMMA (PMMA&LDH) bone cement with superior osseointegration performance has been synthesized. The maximum polymerization reaction temperature of PMMA&LDH decreased by 7.0 and 11.8 °C, respectively, compared with that of PMMA and PMMA&COL-I (mineralized collagen I modified PMMA). The mechanical performance of PMMA&LDH decreased slightly in comparison with PMMA, which is beneficial to alleviate stress-shielding osteolysis, and indirectly promote osseointegration. The superior osteogenic ability of PMMA&LDH has been demonstrated in vivo, which boosts bone growth by 2.17- and 18.34-fold increments compared to the PMMA&COL-I and PMMA groups at 2 months, postoperatively. Moreover, transcriptome sequencing revealed four key osteogenic pathways: p38 MAPK, ERK/MAPK, FGF, and TGF-β, which were further confirmed by IPA, qPCR, and Western blot assays. Hence, LDH-modified PMMA bone cement is a promising biomaterial to enhance bone growth with potential applications in relevant orthopedic surgeries.

"Robust-Soft" Anisotropic Nanofibrillated Cellulose Aerogels with Superior Mechanical, Flame-Retardant, and Thermal Insulating Properties

Advanced thermal insulation materials with low thermal conductivity and robustness derived from regenerative resources are badly needed for building energy conservation. Among them, nanofibrillated cellulose aerogels have huge application potential in the field of thermal insulation materials, but it is still a challenge to prepare cellulose aerogels of excellent comprehensive properties in a simple way. Herein, we demonstrate a unidirectional freeze-drying strategy to develop a novel "robust-soft" anisotropic nanofibrillated cellulose aerogel (NFC-Si-T) by integrating nanofibrillated cellulose (NFC) and Si-O-Si bonding networks under the catalytic dehydration of p-toluenesulfonic acid (TsOH). The anisotropic structure endows the NFC-Si-T with high flexibility that can be easily bent or even tied with a knot, and in addition, it possesses high Young's modulus (1-3.66 MPa) that can resist the compression weight of 10,000 times of its own weight without deformation. Furthermore, the NFC-Si-T aerogels exhibit anisotropic thermal insulation performances with a low average thermal conductivity (0.028-0.049 W m^-1 K^-1). More importantly, the limited oxygen index of the NFC-Si-T reaches up to 42.6-51%, showing excellent flame-retardant performance. Therefore, the "robust-soft" anisotropic NFC-Si-T aerogels can be used as an advanced thermal insulation material for building thermal insulation applications.

Epoxidized Block and Statistical Copolymers Reinforced by Organophosphorus-Titanium-Silicon Hybrid Nanoparticles: Morphology and Thermal and Mechanical Properties

Glycidyl methacrylate (GMA) and a mixture of alkyl methacrylates (average chain length of 13 carbons; termed C13MA; derived from vegetable oils) were copolymerized by nitroxide-mediated polymerization to form epoxidized statistical and block copolymers with similar compositions (F GMA ∼0.8), which were further cross-linked by a bio-based diamine. Hybrid plate-like nanoparticles containing organophosphorus-titanium-silicon (PTS) with an average size of ∼130 nm and high decomposition temperature (485 °C) were synthesized via a hydrothermal reaction to serve as additives to simultaneously enhance the thermal and mechanical properties of the blend. Nanocomposites filled with PTS were prepared at different filler-loading levels (0.5, 2, 4 wt %). Transmission electron microscopy (TEM) of the cured block copolymer displayed reaction-induced macrophase-separated domains. TEM also showed an effective dispersion of PTS hybrids in the matrix without intense agglomeration. Thermogravimetric analysis at different heating rates revealed the activation energy of poly (GMA-stat-C13MA) at maximum decomposition increased from 143.5 to 327.2 kJ mol-1 with 4 wt % PTS. Decomposition temperature and char residue improved 12 °C and ∼7 wt %, respectively, and T g increased 12 °C by adding 4 wt % PTS. Targeting various PTS concentrations enabled tuning of the tensile modulus (up to 75%), tensile strength (up to 46%), and storage modulus in both glassy state (up to 59%) and rubbery plateau regions (up to 88%). Oscillatory frequency sweeps indicated that PTS makes the storage modulus frequency dependent, suggesting that the inclusion of the nanoparticles alters the relaxation of the surrounding matrix polymer.

Recent Progress in Polysaccharide Aerogels: Their Synthesis, Application, and Future Outlook

Porous polysaccharides have recently attracted attention due to their porosity, abundance, and excellent properties such as sustainability and biocompatibility, thereby resulting in their numerous applications. Recent years have seen a rise in the number of studies on the utilization of polysaccharides such as cellulose, chitosan, chitin, and starch as aerogels due to their unique performance for the fabrication of porous structures. The present review explores recent progress in porous polysaccharides, particularly cellulose and chitosan, including their synthesis, application, and future outlook. Since the synthetic process is an important aspect of aerogel formation, particularly during the drying step, the process is reviewed in some detail, and a comparison is drawn between the supercritical CO2 and freeze drying processes in order to understand the aerogel formation of porous polysaccharides. Finally, the current applications of polysaccharide aerogels in drug delivery, wastewater, wound dressing, and air filtration are explored, and the limitations and outlook of the porous aerogels are discussed with respect to their future commercialization.

A new cancellous bone material of silk fibroin/cellulose dual network composite aerogel reinforced by nano-hydroxyapatite filler

Composites materials comprised of biopolymeric aerogel matrices and inorganic nano-hydroxyapatite (n-HA) fillers have received considerable attention in bone engineering. Although with significant progress in aerogel-based biomaterials, the brittleness and low strengths limit the application. The improvements in toughness and mechanical strength of aerogel-based biomaterials are in great need. In this work, an alkali urea system was used to dissolve, regenerate and gelate cellulose and silk fibroin (SF) to prepare composite aerosol. A dual network structure was shaped in the composite aerosol materials interlaced by sheet-like SF and reticular cellulose wrapping n-HA on the surface. Through uniaxial compression, the density of the composite aerogel material was close to the one of natural bone, and mechanical strength and toughness were high. Our work indicates that the composite aerogel has the same mechanical strength range as cancellous bone when the ratio of cellulose, n-HA and SF being 8:1:1. In vitro cell culture showed HEK-293T cells cultured on composite aerogels had high ability of adhesion, proliferation and differentiation. Totally, the presented biodegradable composite aerogel has application potential in bone tissue engineering.

Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review

Naturally derived nanocellulose (NC) is a renewable, biodegradable nanomaterial with high strength, low density, high surface area, and tunable surface chemistry, which allows its interaction with other polymers and nanomaterials in a controlled manner. In recent years, NC aerogel has gathered a lot of attention due to environmental concerns. This review presents recent developments of NC-based aerogels and their controlled interactions with other polymers and nanomaterials for thermal applications that include electronic devices, the apparel industry, superinsulating materials, and flame-retardant smart building materials. After going through the distinctive properties of NC aerogels, they are orderly categorized and discussed as thermally insulated, thermally conductive, and flame-retardant materials.

Nanocellulose-based lightweight porous materials: A review

Nanocellulose has been widely concerned and applied in recent years. Because of its high aspect ratio, large specific surface area, good modifiability, high mechanical strength, renewability and biodegradability, nanocellulose is particularly suitable as a base for constructing lightweight porous materials. This review summarizes the preparation methods and applications of nanocellulose-based lightweight porous materials including aerogels, cryogels, xerogels, foams and sponges. The preparation of nanocellulose-based lightweight porous materials usually involves gelation and drying processes. The characteristics and influencing factors of three main drying methods including freeze, supercritical and evaporation drying are reviewed. In addition, the mechanism of physical and chemical crosslinking during gelation and the effect on the structure and properties of the porous materials in different drying methods are especially focused on. This contribution also introduces the application of nanocellulose-based lightweight porous materials in the fields of adsorption, biomedicine, energy storage, thermal insulation and sound absorption, flame retardancy and catalysis.