A review of advances over 20 years on polysaccharide-based polymers applied as enhanced efficiency fertilizers

Novel nano-fertilizers derived from drinking water industry waste for sustained release of macronutrients: performance, kinetics and sorption mechanisms

Nanotechnology has emerged as a promising approach for the controlled release of nutrients, particularly phosphorus and potassium. These essential plant nutrients are often applied in excess, leading to environmental pollution and loss of efficiency in crop production. Innovative economic and highly efficient fertilizers are urgently needed to achieve the targeted crop production worldwide in the presence of limited land and water resources. Therefore, in this study, novel, eco-friendly, cost-effective and enhanced efficiency nano-enabled fertilizers, NEF (nWTF1and nWTF2) were synthesized by impregnation of nanostructured water treatment residuals (nWTR) with (KH2PO4 + MgO) at 1:1 and 3:1 (w/w) ratios respectively using a planetary ball mill. The nWTR, nWTF1 and nWTF2 were extensively characterized. The water retention behavior and the sustained release of nutrients from the fabricated nano-enabled fertilizers (nWTF1 and nWTF2) in distilled water and sandy soil were investigated and monitored over time. The water retention capacity of the soil treated with nWTF2 after 26 days was 9.3 times higher than that of soil treated with conventional fertilizer. In addition, the nWTF2 exhibited lower release rates of P, K and Mg nutrients for longer release periods in comparison with the conventional fertilizers. This is a significant advantage over traditional fertilizers, which release nutrients quickly and can lead to leaching and nutrient loss. The main interaction mechanisms of PO4-K-Mg ions with nWTR surface were suggested. The results of the kinetics study revealed that power function was the best suitable model to describe the kinetics of P, K and Mg release data from NEF in water and soil. The produced NEF were applied to Zea maize plants and compared to commercial chemical fertilizer control plants. The obtained results revealed that the nano-enabled fertilizers (nWTF1 and nWTF2) significantly promoted growth, and P content compared with the commercial chemical fertilizer treated plants. The present work demonstrated the power of nano enabled fertilizers as efficient and sustained release nano-fertilizers for sustainable agriculture and pollution free environment.

Bioactive interpenetrating hybrids of poly(hydroxyethyl methacrylate-co-glycidyl methacrylate): Effect of polysaccharide types on structural peculiarities and multifunctionality

Crosslinked poly(hydroxyethyl methacrylate-co-glycidyl methacrylate) hybrids prepared in the same experimental condition by adding various polysaccharides of different chemical types; inulin, Na-alginate, starch and κ-Carrageenan were qualitatively compared. The results are presented to extract relevant physicochemical properties for qualitative comparison of structures within the same synthesis batch. Elastic properties and swelling degree of hybrids can be tightly regulated using different types of polysaccharides and by controlling effective cross-linking density. Addition of κ-Carrageenan to copolymer network increased elastic modulus by 6.2-fold in as-prepared state, but greatest increase in effective cross-link density through swelling was observed in alginate-doped gels. An overshooting effect was observed for alginate-doped hybrids; swelling first to a maximum, followed by a gradual deswelling until equilibrium was reached. Compressive elasticity of hybrids is mainly controlled by type of polysaccharides and cross-linking density but also depends on polymerization temperature. The obtained hybrid gels displayed excellent adsorption performance for methyl orange (MO). The highest adsorption capacity was reached with inulin-doped hybrids. The rate of adsorption was very fast and reached equilibrium with 98.9 % efficiency at about 90 min. This approach to modify the properties of hybrid gels with various types of polysaccharides may find wide use in biomaterials and water purification applications.

Alginate-based composites as novel soil conditioners for sustainable applications in agriculture: A critical review

The development of alginate-based composites in agriculture to combat nutrient loss and drought for sustainable development has drawn increasing attention in the scientific community. Existing studies are however scattered, and the retention and slow-release mechanisms of alginate-based composites are not well understood. This paper systematically reviews the current literature on the preparation, characterization, and agricultural applications of various alginate-based composites. The synthesis methods of alginate-based composites are firstly summarized, followed by a review of available analytical techniques to characterize alginate-based composites for the attainment of their desired performance. Secondly, the performance and controlling factors for agricultural applications of alginate-based composites are discussed, including aquasorb, slow-release fertilizer, soil amendment, microbial inoculants, and controlled release of pesticides for pest management. Finally, suggestions and future perspectives are proposed to expand the applications of alginate-based composites for sustainable agriculture.

Increasing the efficiency of agricultural fertilizers using cellulose nanofibrils: A review

Developing new agricultural products, such as new fertilizers with high use efficiency and less negative impact on the environment, is required in sustainable agriculture. In this vein, controlled-release fertilizers (CRFs) have been designed to decrease nutrient waste and increase nutrients' availability to plants. Various CRFs have been developed based on petroleum-derived polymers with many advantages over conventional fertilizers. Although, their use is limited due to their adverse effects on the soil and environment. To overcome these issues, CRFs based on biopolymers represent a new generation of fertilizers developed by encapsulating nutrients with cellulose nanofibrils (CNFs). CNFs and the hydrogels based on CNFs have great potential to be applied as CRFs matrix as they are biodegradable, minimize environmental pollution, and exhibit a great controlled-release potential and water/nutrient retention capacity. In order to gain a better understanding of the potential benefits of these new fertilizers in agricultural systems, this review summarizes the recent advances in CNFs in CRFs, the coating methods, hydrogel preparation techniques, and their impact on plant growth and soil. By examining these factors in depth, a better understanding can be gained on how these novel fertilizers can help improve agricultural productivity and sustainability.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Statistical optimization of a sustainable fertilizer composition based on black soldier fly larvae as source of nitrogen

In the present work, a statistical optimization of a sustainable coating for core-shell NPK (Nitrogen-Phosphorus-Potassium) fertilizers was investigated. The environmental green coating was enriched in nitrogen using a biomass and renewable source, namely the nitrogen rich fraction of black soldier fly larvae (BSFL) (Hermetia Illucens, Diptera: Stratiomyidae) reared on vegetable waste. A rational approach was proposed with the aim of calculating the best formulation of the coating, considering both its manufacturing behavior, such as adhesion to the core, and its physical properties, such as homogeneity or plasticity. From a circular economy perspective, together with the nitrogen-rich fraction from BSFL (from 51 to 90 wt.%), water and glycerol were considered for the coating formulation in different proportion: from 10 to 32 wt.% and from 0 to 17 wt.% respectively. The Design of Experiments technique was implemented to limit the total number of tests for the coating formulation (18 tests). ANOVA was employed, with the aim of obtaining mathematical models to derive a better precise and objective formulation. The results show that the use of glycerol can be avoided, as well as only a limited amount of water (11 wt.%) is necessary to obtain an optimized coating formulation, thereafter, satisfying the more relevant technological and physical properties for the coating manufacturing.