Preparation of carboxymethyl cellulose/chitosan-CuO giant vesicles for the adsorption and catalytic degradation of dyes

Chitosan-based adsorbents for remediation of toxic dyes from wastewater: A review on adsorption mechanism, reusability, machine learning based modeling and future perspectives

The disposal of recalcitrant dyes in aquatic environments from various industrial sectors is a threat to both the plant and animal kingdom. The presence of dyes in various water bodies undermines the availability of uncontaminated drinking water and may result in serious health-related issues and diseases. Therefore, it is of utmost importance to get rid of these harmful dyes from the aquatic environment. Hence various treatment techniques came to the fore, but they have their corresponding advantages and disadvantages. Several researchers have reported the adsorption of dyes with carbon-based composites, polymeric materials, and metal-based nanoparticles. However, the one with biocompatible materials or biopolymers deserves special attention as they are benign from an environmental viewpoint. We have chosen chitosan as our material of interest and elaborated on the positive aspects of chitosan as an excellent candidate for dye adsorption. Although a plethora of review articles has been disseminated in the past to underscore the utilization of chitosan-based adsorbents in the extraction of dyes, this manuscript endeavors to furnish a thorough examination of the complete adsorption process, encompassing its parameters and kinetics, thus facilitating a reader lacking foundational knowledge in this field to attain a more comprehensible understanding of the subject matter. This review also integrates a comprehensive overview of optimization methodologies for dye adsorption and examines relevant patents-an area that, to the best of our knowledge, has not been thoroughly addressed in previous review articles. Conclusively, it can be stated that chitosan can efficiently adsorb dye from wastewater showing good performance even after five cycles of adsorption/desorption. Moreover, several software programs can be used for optimizing maximum dye adsorption capacity of chitosan which shows well alignment with experimental results, thus making it suitable for real-life applications.

Dual cross-linked magnetic gelatin/carboxymethyl cellulose cryogels for enhanced Congo red adsorption: Experimental studies and machine learning modelling

To achieve highly efficient and environmentally degradable adsorbents for Congo red (CR) removal, we synthesized a dual-network nanocomposite cryogel composed of gelatin/carboxymethyl cellulose, loaded with Fe3O4 nanoparticles. Gelatin and sodium carboxymethylcellulose were cross-linked using transglutaminase and calcium chloride, respectively. The cross-linking process enhanced the thermal stability of the composite cryogels. The CR adsorption process exhibited a better fit to the pseudo-second-order model and Langmuir model, with maximum adsorption capacity of 698.19 mg/g at pH of 7, temperature of 318 K, and initial CR concentration of 500 mg/L. Thermodynamic results indicated that the CR adsorption process was both spontaneous and endothermic. The performance of machine learning model showed that the Extreme Gradient Boosting model had the highest test determination coefficient (R2 = 0.9862) and the lowest root mean square error (RMSE = 10.3901 mg/g) among the 6 models. Feature importance analysis using SHapley Additive exPlanations (SHAP) revealed that the initial concentration had the greatest influence on the model's prediction of adsorption capacity. Density functional theory calculations indicated that there were active sites on the CR molecule that can undergo electrostatic interactions with the adsorbent. Thus, the synthesized cryogels demonstrate promising potential as adsorbents for dye removal from wastewater.

Monolayer Adsorption of Ciprofloxacin on Magnetic Inulin/Mg-Zn-Al Layered Double Hydroxide: Advanced Interpretation of the Adsorption Process

In this study, magnetic inulin/Mg-Zn-Al layered double hydroxide (MILDH) was synthesized for the adsorption of ciprofloxacin. The application of various analytical techniques confirmed the successful formation of MILDH. For the optimization of controllable factors, Taguchi design was applied and optimum values were obtained as equilibrium time─100 min, adsorbent dose─20 mg, and ciprofloxacin concentration─30 mg/L. The highest capacity of the material was recorded as 196.19 mg/g at 298 K. Langmuir model (R2 = 0.9669-0.9832) fitted best as compared to the Freundlich model (R2 = 0.9588-0.9657), concluded the monolayer adsorption of ciprofloxacin on MILDH. Statistical physics model M 2 was found to fit best to measured data (R2 = 0.9982-0.9989), indicating that the binding of ciprofloxacin took place on two types of receptor sites (n1 and n2). The multidocking mechanism with horizontal position was suggested on the first receptor site (n1 < 1), while multimolecular adsorption of ciprofloxacin lying vertically on the second receptor site (n2 > 1) at all temperatures. The adsorption energies (E1 = 22.79-27.20 kJ/mol; E2 = 18.00-19.46 kJ/mol) illustrated that the adsorption of ciprofloxacin onto MILDH occurred through physical forces. Best fitting of the fractal-like pseudo-first-order kinetic model (R2 = 0.9982-0.9992) indicated that the adsorption of ciprofloxacin happened on the MILDH surface having different energies. X-ray photoelectron spectroscopy analysis further confirmed the adsorption mechanism of ciprofloxacin onto MILDH.

One-step fabrication of millimeter-scale hollow vesicles with chitosan /DADMAC/ sodium alginate graft copolymer for enhanced anionic dye adsorption

Hollow vesicles are promising in water treatment due to their unique structure of the membrane and inner cavity. However, the adsorption capacity needs to be improved for targeted pollutants. Herein, millimeter-scale hollow vesicles were prepared with a one-step process of sequential stirring and grafting using chitosan, diallyldimethylammonium chloride, and sodium alginate as raw materials with the purpose of efficient removal of anionic dyes from wastewater. The composite vesicles were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The hollow vesicles showed the structure of the cationic membrane and the inner cavity, facilitating the dye adsorption. The adsorption capacity for the anionic dye Reactive Black 5 reached 698.1 mg/g, more than twice that of the binary composite vesicles without graft. The adsorption kinetics and isotherm data coincided with the pseudo-second-order and Langmuir models, respectively, and the adsorption mechanism was monolayer chemisorption. Moreover, the vesicles worked well in wide ranges of environment pH, temperature, and co-existing pollutants. They also possessed excellent cyclic regeneration performance, in which 93 % of the initial adsorption capacity was maintained after four cycles. These results indicate that the millimeter-scale hollow vesicles exhibit broad application prospects for wastewater purification.

Ferrocene crosslinked and functionalized chitosan microspheres towards bio-based Fenton-like system for the removal of organic pollutants

Dye-containing wastewater treatment has been a major long-term global challenge. For this purpose, a novel bio-based microspheres (CS-FC) with high specific surface area (63.24 m2·g-1) and nano-channels (17.95 nm) was prepared using chitosan as the framework and ferrocene as a crosslinking active group. CS-FC not only has the ability to rapidly enrich methyl orange (MO) through hydrogen-bonding and electrostatic attraction, but also almost completely degrades it in the presence of H2O2/K2S2O8 through a synergistic radical/non-radical mechanism under the activating effect of ferrocene. Without H2O2/K2S2O8, the maximum MO adsorption capacity of CS-FC is in the range 871-1050 mg·g-1, and conforms to a Langmuir isothermal model with pseudo-second-order kinetics. In the presence of H2O2/K2S2O8, the removal of MO dramatically increased from 32 % to nearly 100 % after incubation for 60 min, due to the simultaneous formation of highly reactive 1O2 and ·OH. The significant contribution from 1O2 endowed CS-FC/H2O2/K2S2O8 with high universality for degrading various organic pollutants (including azo dyes and antibiotics), a wide pH window (2-8), and low sensitivity to co-existing ions. Such cost-effective, recyclable porous bio-based microspheres are suitable for heterogeneous Fenton-like catalysis in organic wastewater treatment that rely on synergistic radical/non-radical reaction pathways.

Tailored chitosan-based entrapped catalyst for dyes removal by highly active, stable, and recyclable nanoparticles toughened hydrogel

Functional catalytic hydrogels were a promising catalyst carrier with the advantages of low cost, high efficiency and environmental friendliness. However, conventional hydrogels suffered from mechanical defects and brittleness. Acrylamide (AM) and lauryl methacrylate (LMA) were used as raw materials, SiO₂-NH₂ spheres as toughening agents, and chitosan (CS) as stabilizers to form hydrophobic binding networks. p(AM/LMA)/SiO₂-NH₂/CS hydrogels exhibited superior stretchability and withstood strains up to 14,000 %. In addition, these hydrogels exhibited exceptional mechanical properties, including a tensile strength of 213 kPa and a toughness of 13.1 MJ/m³. Surprisingly, the introduction of chitosan into hydrogels showed excellent antibacterial activity against S. aureus and E. coli. At the same time, the hydrogel served as a template for the formation of Au nanoparticles. This resulted in high catalytic activity for methylene blue (MB) and Congo red (CR) on p(AM/LMA)/SiO₂-NH₂/CS-8 %-Au hydrogels with K_app of 1.038 and 0.76 min^-1, respectively. The catalyst was also found to be reusable for 10 cycles while maintaining an efficiency of over 90 %. Therefore, innovative design strategies can be used to develop durable and scalable hydrogel materials for catalysis in the wastewater treatment industry.

Latest advances in layered covalent organic frameworks for water and wastewater treatment

This review provides an overview of recent progress in the development of layered covalent organic frameworks (LCOFs) for the adsorption and degradation of pollutants in water and wastewater treatment. LCOFs have unique properties such as high surface area, porosity, and tunability, which make them attractive adsorbents and catalysts for water and wastewater treatment. The review covers the different synthesis methods for LCOFs, including self-assembly, co-crystallization, template-directed synthesis, covalent organic polymerization (COP), and solvothermal synthesis. It also covers the structural and chemical characteristics of LCOFs, their adsorption and degradation capacity for different pollutants, and their comparison with other adsorbents and catalysts. Additionally, it discussed the mechanism of adsorption and degradation by LCOFs, the potential applications of LCOFs in water and wastewater treatment, case studies and pilot-scale experiments, challenges, and limitations of using LCOFs, and future research directions. The current state of research on LCOFs for water and wastewater treatment is promising, however, more research is needed to improve their performance and practicality. The review highlights that LCOFs have the potential to significantly improve the efficiency and effectiveness of current water and wastewater treatment methods and can also have implications for policy and practice.

Composite beads from chitosan and zeolitic imidazolate framework-8 for the adsorption and photocatalytic degradation of reactive red 141

This study describes the fabrication of composite beads comprising chitosan and zeolitic imidazolate framework-8 (ZIF-8) as a natural biodegradable dye adsorbent and support for ZnO photocatalyst. Chitosan beads were cross-linked with trisodium citrate dihydrate to enhance the adsorption capacity for the reactive red 141 dye (RR141). The ability was further improved by adding ZIF-8. The optimum loading was 2.5%, and the adsorption equilibrium was reached within 2 h. The maximum adsorption capacity of the composite beads was 6.51 mg g-1 at pH 4 when an initial concentration of 1000 mg L-1 was used. The pseudo-second-order kinetics model and the Langmuir isotherm model best described the adsorption process. The composite beads could also adsorb dyes like reactive black, Congo red, direct yellow, reactive orange, rhodamine B, crystal violet, and methylene blue (MB). Thermal stability was significantly improved after coating the surface of the 2.5% ZIF beads with a ZnO photocatalyst. After UV irradiation for 5 h, the photocatalytic beads containing 2.59 weight percent of ZnO could decolorize 99% of MB and 90% of RR141 dyes with a degradation rate of 0.6032 h-1 and 0.3198 h-1, respectively. Furthermore, the photocatalytic beads remained effective for at least ten consecutive cycles.

CuO Nanorods Immobilized Agar-Alginate Biopolymer: A Green Functional Material for Photocatalytic Degradation of Amaranth Dye

The contamination of water is increasing day by day due to the increase of urbanization and population. Textile industries contribute to this by discarding their waste directly into water streams without proper treatment. A recent study explores the treatment potential of copper oxide nanorods (CuO NRs) synthesized on a green basis in the presence of a biopolymer matrix of agar (AA) and alginate (Alg), in terms of cost effectiveness and environmental impact. The synthesized bio nanocomposite (BNC) was characterized by using different instrumental techniques such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), ultra-violet spectroscopy (UV-Vis), scanning electron microscopy-energy dispersive X-ray-elemental analysis (SEM-EDX), transmission electron microscopy (TEM), selected area diffraction pattern (SAED) and X-ray photoelectron spectroscopy (XPS). The optical studies revealed that immobilization of CuO NRs with Alg-Agar biopolymer blend resulted in an increase in light absorption capacity by decreasing the energy bandgap from 2.53 eV to 2.37 eV. The bio nanocomposite was utilized as a photocatalyst for the degradation of amaranth (AN) dye from an aquatic environment under visible light irradiation. A statistical tool known as central composite design (CCD) associated with response surface methodology (RSM) was taken into consideration to evaluate the optimized values of process variables and their synergistic effect on photocatalytic efficiency. The optimized values of process variables were found to be irradiation time (45 min), AN concentration (80 ppm), catalyst dose (20 mg), and pH (4), resulting in 95.69% of dye degradation at 95% confidence level with desirability level 1. The rate of AN degradation was best defined by pseudo-first-order reaction based on the correlation coefficient value (R2 = 0.99) suggesting the establishment of adsorption-desorption equilibrium initially at the catalyst surface then photogenerated ^•O₂^- radicals interacting with AN molecule to mineralize them into small non-toxic entities like CO₂, H₂O. The material used has high efficiency and stability in photocatalytic degradation experiments up to four cycles of reusability.

Chitosan-based dual network composite hydrogel for efficient adsorption of methylene blue dye

With the rapid development of the textile industry, a large amount of dyeing wastewater discharge has caused great harm to the ecological environment. In this work, a dual-network, composite hydrogel adsorbent with excellent mechanical properties, good reusability, and large adsorption capacity was prepared by introducing chitosan cross-linked polyvinylamine into the N,N'-methylenebisacrylamide cross-linked polyacrylic acid network. The dual cross-linking network gave the hydrogel excellent mechanical properties with maximum tensile stress and strain up to 1.9 MPa and 920 %. The adsorption capacity of methylene blue on hydrogel was up to 596.14 mg/g. In addition, the prepared hydrogel exhibited good reusability, and their adsorption efficiency remained above 85 % in five consecutive cycles. The adsorption behavior was well fitted by Pseudo-second-order kinetics and the Langmuir equation, indicating that the hydrogel was chemisorbed to the dye as a monolayer. The adsorption mechanism analysis showed that the electrostatic interactions and hydrogen bonding between the functional groups of the hydrogels and methylene blue molecules contributed to the good adsorption capacity. Overall, the synthesized composite hydrogels could be used as an efficient adsorbent for the removal of methylene blue dye, particularly from textile industry wastewater.

Synthesis and Applications of Carboxymethyl Cellulose Hydrogels

Hydrogels are basic materials widely used in various fields, especially in biological engineering and medical imaging. Hydrogels consist of a hydrophilic three-dimensional polymer network that rapidly expands in water and can hold a large volume of water in its swelling state without dissolving. These characteristics have rendered hydrogels the material of choice in drug delivery applications. In particular, carboxymethyl cellulose (CMC) hydrogels have attracted considerable research attention for the development of safe drug delivery carriers because of their non-toxicity, good biodegradability, good biocompatibility and low immunogenicity. Aiming to inspire future research in this field, this review focuses on the current preparation methods and applications of CMC gels and highlights future lines of research for the further development of diverse applications.