Choline chloride based eutectic solvents: Magical catalytic system for carbon–carbon bond formation in the rapid synthesis of β-hydroxy functionalized derivatives

Choline Halide-Based Deep Eutectic Solvents as Biocompatible Catalysts for the Alternating Copolymerization of Epoxides and Cyclic Anhydrides

Aliphatic polyesters have received considerable attention in recent years due to their biodegradability and biocompatible, mechanical, and thermal properties that can make them a suitable alternative to today's commercialized polymers. The ring-opening copolymerization (ROCOP) of epoxides and cyclic anhydrides is a route to synthesize a diverse array of polyesters that could be useful in many applications. However, the catalysts used rarely consider biocompatible catalysts in the case that any are left in the polymer. To the best of our knowledge, we report the first example of using deep eutectic solvents (DESs) as biocompatible catalysts for this target ROCOP with polymerization activity for at least six diverse monomer pairs. Choline halide salts are active for this polymerization, with dried salts showing polymerization slower than that of those conducted in air. Hydrogen bonding with water is hypothesized to enhance the rate-determining step of epoxide ring opening. While the presence of water improves the rate of polymerization, it also acts as a chain transfer agent, leading to smaller molar mass polymers than intended. Combining the choline halide salts with urea or ethylene glycol hydrogen bond donors in air led to DES catalysts that reacted similarly to the salts exposed to air. However, when generating these DESs in air-free conditions, they showed similar rates of polymerization without a drop in polymer molar mass. The hydrogen bonding provided by urea and ethylene glycol seems to promote the rate increase without serving as a chain transfer agent. Results reported herein display the promising potential of biocompatible catalyst systems for this ROCOP process as well as introducing the use of hydrogen bonding to enhance polymerization rates.

Magnet-responsive choline carbomer ionogels as a versatile and recyclable catalyst for one-pot synthesis of benzopyran in water

Ionogels are gaining popularity as a potential replacement for volatile organic solvents in various processes, such as catalysts, electrochemistry, spectroscopy, and medicinal chemistry, due to their low toxicity, high thermal stability, and good solubility. Magnet-responsive ion gels with high magnetic susceptibility are promising and can be used as catalysts, sensors, and MRI contrast agents. Herein, we fabricated simple and novel magnet choline carbomer ionogels using a precipitation-deposition method with carbomers and choline hydroxide. The morphology and structure of the resulting ionogels were analyzed using various characterization techniques, including FTIR, EDX, TGA, and SEM spectroscopy. These magnet ionogels were effective catalysts for a one-pot, three-component synthesis of benzopyran derivatives, providing mild reaction conditions, environmental friendliness, and good to excellent (78-96%) yields within a short reaction time (1-2 h). Additionally, the magnet ionogels were easily recyclable, and they could be reused up to five times without catalytic deactivation.

Uncovering biodegradability and biocompatibility of betaine-based deep eutectic systems

Deep eutectic systems (DES) have shown increasing popularity in last decade; however, the number of studies on the potential toxicity towards living organisms remains scarce. These studies are of the utmost importance to infer on the claimed non-toxicity and biocompatibility of DES. Most articles published, at this moment, only evaluate the toxicity towards a cell model or in different strains of bacteria. For this purpose, in this work, the effect of two DES (betaine:sorbitol:water 1:1:3 and betaine:glycerol 1:2) and their individual components were evaluated at different concentrations after administered via intraperitoneal injection in zebrafish (Danio rerio). The total antioxidant capacity, lipoperoxidation, and the activity of various enzymes that work in different antioxidant pathways (superoxide dismutase, glutathione peroxidase, catalase, and glutathione S-transferase) were assessed. The results show no significant toxicity within the tested concentrations: up to 5000 µM and 3000 µM, for the assays using the system betaine:sorbitol:water 1:1:3 and for betaine:glycerol 1:2, respectively. The toxicity of individual components was studied up to 1000 µM. Based on the encouraging results that have been obtained, it is safe to conclude that these two deep eutectic systems can be used as the new class of environmentally friendly solvents.

Cytotoxicity profiling of choline chloride-based natural deep eutectic solvents

This study aims to examine in detail for the first time the cytotoxic profile of twelve choline chloride-based deep eutectic solvents (NADES) against HT-29, Caco-2, MCF-7, and MRC-5 cell lines. All NADES systems were synthesized by microwave synthesis using choline chloride as a hydrogen bond acceptor (HBA) and selected sugars, alcohols, organic acids, and urea as hydrogen bond donors (HBD) with the addition of 20% water (w/w) to all systems. It was observed that the cytotoxic effect predominantly depended on the structure of HBD. Acidic systems, where HBDs were organic acids showed the highest cytotoxic effects in all investigated cell lines. The cytotoxicity depended mostly on the concentration of the NADES system in the cell medium as well as on the chemical constitution of the investigated systems. The highest cytotoxic effects showed acidic systems, especially to the HT-29 cell line. The EC₅₀ value for the citric acid-based system was 3.91 mg mL^-1 for the HT-29 cell line which was the most vulnerable to acidic NADES systems.

IL versus DES: Impact on chitin pretreatment to afford high quality and highly functionalizable chitosan

Chitin is mainly extracted from crustaceans, but this resource is seasonally dependent and can represent a major drawback to satisfy the traceability criterion for high valuable applications. Insect resources are valuable alternatives due to their lower mineral content. However, the deacetylation of chitin into chitosan is still an expensive process. Therefore, we herein compare the impact of both DES/IL-pretreatments on the efficiency of the chemical deacetylation of chitin carried out over two insect sources (Bombyx eri, BE and Hermetia illucens, HI) and shrimp shells (S). The results showed that chitosans obtained from IL-pretreated chitins from BE larva, present lower acetylation degrees (13-17%) than DES-pretreated samples (18-27%). A selective N-acylation reaction with oleic acid has also been performed on the purest and most deacetylated chitosans leading to high substitution degrees (up to 27%). The overall approach validates the proper chitin source and processing methodology to achieve high quality and highly functionalizable chitosan.

Synthesis of Mannich-type derivatives from amides activated by hydrogen bonding with ZnCl2

The amide group has one of the most significant functionalities found in many natural products. Herein, low-nucleophilic amides are used in a Mannich-type reaction to synthesize N-acyl-protected amine derivatives. A highly efficient synthetic method utilizing simple aldehydes, N-substituted anilines, and amides as substrates was established through a one-pot amide pathway activated by hydrogen bonding between the ZnCl₂ and amide under solvent-free conditions. This strategy can be broadly applied to medicinal chemistry. More importantly, compared with the previous Lewis acid catalyzed reaction, we proposed a new application of zinc chloride.

Deep eutectic solvent as solvent and catalyst: one-pot synthesis of 1,3-dinitropropanes via tandem Henry reaction/Michael addition

The Henry reaction was performed using microwave heating within the deep eutectic solvent (DES) choline chloride/urea (ChCl/urea) which acted as both the catalyst and solvent for the reaction. The optimisation of the conditions (temperature, heating mode, time, DES) allowed 1,3-dinitropropane derivatives to be obtained via tandem Henry reaction/Michael addition, in one step from a range of different aromatic aldehydes in high yields and under mild reaction conditions.

A review of sustainable lignocellulose biorefining applying (natural) deep eutectic solvents (DESs) for separations, catalysis and enzymatic biotransformation processes

Conventional biorefinery processes are complex, engineered and energy-intensive, where biomass fractionation, a key functional step for the production of biomass-derived chemical substances, demands industrial organic solvents and harsh, environmentally harmful reaction conditions. There is a timely, clear and unmet economic need for a systematic, robust and affordable conversion method technology to become greener, sustainable and cost-effective. In this perspective, deep eutectic solvents (DESs) have been envisaged as the most advanced novel polar liquids that are entirely made of natural, molecular compounds that are capable of an association via hydrogen bonding interactions. DES has quickly emerged in various application functions thanks to a formulations’ simple preparation. These molecules themselves are biobased, renewable, biodegradable and eco-friendly. The present experimental review is providing the state of the art topical overview of trends regarding the employment of DESs in investigated biorefinery-related techniques. This review covers DESs for lignocellulosic component isolation, applications as (co)catalysts and their functionality range in biocatalysis. Furthermore, a special section of the DESs recyclability is included. For DESs to unlock numerous new (reactive) possibilities in future biorefineries, the critical estimation of its complexity in the reaction, separation, or fractionation medium should be addressed more in future studies.

Cytotoxicity profiling of deep eutectic solvents to human skin cells

The tailor-made character of deep eutectic solvents (DES) turns them very attractive to be used in several applications, including in health-related areas such as pharmaceutical, nutraceutical, and cosmetic industries. However, although DES has been touted as “green” solvents, several works proved that their potential toxicity should not be neglected. Using the premise of DES applicability in the cosmetic and pharmaceutical sectors, we chose two cell lines to work as a skin model (keratinocytes HaCaT and tumor melanocytes MNT-1), to assess DES cytotoxicity. The effect of three different hydrogen bond acceptors (HBA) ([Chol]Cl, [N₁₁₁₁]Cl and [N₄₄₄₄]Cl) and three different hydrogen bond donors (HBD) (hexanoic and butanoic acid, ethylene glycol, 1-propanol and urea) were evaluated through a common viability assay (MTT assay). Results were promising since [Chol]Cl and [N₁₁₁₁]Cl- based DES showed good biocompatibility for the tested cells. [N₄₄₄₄]Cl-based DES, however, showed cytotoxicity for both cell lines, with the HBA being the driver of the toxicity. Interestingly, some compounds increased cell viability in the HaCaT cell line, namely [Chol]Cl, ethylene glycol, hexanoic acid, urea, and all [Chol]Cl and [N₁₁₁₁]Cl-based DES and should be considered as targets for future studies. These results highlight their possible use in cosmetic or pharmaceutical formulations.

Thermophysical and Forced Convection Studies on (Alumina + Menthol)-Based Deep Eutectic Solvents for Their Use as a Heat Transfer Fluid

The current work reports the thermophysical and flow measurements of novel thermal solvents based on deep eutectic solvents (DESs) and alumina-based nanoparticle-dispersed deep eutectic solvents (NDDESs) for its use as a potential solar energy storage medium. The DESs were synthesized using a hydrogen bond donor (i.e., oleic acid) and a hydrogen bond acceptor (i.e., dl-menthol) by using the COSMO-SAC-predicted equimolar ratio at a temperature of 350.15 K. Thereafter, NDDESs or nanofluids were formed by dispersing different volume fractions (0.001, 0.005, 0.0075, and 0.01) of Al₂O₃ nanoparticles in the DESs. The optimum volume fraction (0.005) of Al₂O₃ nanoparticles was selected through their thermophysical properties (density, viscosity, thermal conductivity, and specific heat capacity) and its agglomeration or stability behavior. As expected, NDDESs with a 0.005 volume fraction gave a higher enhancement in thermal conductivity, viscosity, heat capacity, and density as compared to DESs. To evaluate the heat transfer coefficient, forced convection experiments were conducted in a circular test section for both DESs and NDDESs under laminar conditions (Re = 124, 186, and 250). The enhancement of the local heat transfer coefficient was found to be higher when compared to their thermophysical properties. This was due to the nanoparticle migration resulting in a non-uniform distribution of both thermal conductivity and viscosity fields, which was inherently found to reduce the thermal boundary layer thickness. In the final section, the heat transfer coefficient and the Nusselt number were also validated with COMSOL Multiphysics simulations.

The antagonist and synergist potential of cholinium-based deep eutectic solvents

The design of environmentally friendlier solvents has gained increasing relevance in the last decade. Deep eutectic solvents (DES) have recently emerged, with advantages like low-cost and putative lower environmental impact. However, information about DES toxicity is still scarce. This work aims to contribute to profiling the ecotoxicity of DES based on cholinium chloride ([Chol]Cl). Six DES were addressed, combining [Chol]Cl (as hydrogen bond acceptor - HBA) with ethylene glycol, glycerol, 1,2-propanediol, propionic acid, 1-propanol, and urea as hydrogen bond donors (HBD), in different molar ratios. The Microtox^® Acute Toxicity Test, was used for assessing their toxicity towards the marine bacteria Allivibrio fischeri . Because the dissociation of DES in water is expected, analysis appraising the mixtures toxicity theory should be considered, which is a step forward in this field. This analysis suggested that [Chol]Cl and all HBD with the exception of propionic acid:[Chol]Cl 1:2 and 4:1 behave antagonistically, which is contrary to what has been suggested previously. The most extreme cases are Urea:[Chol]Cl and 1-Propanol:[Chol]Cl, with EC₅₀ values higher than their starting materials dosed singly, configuring very promising and biocompatible alternative solvents. Toxicity was found to be dependent on DES composition, as well as on molar proportions of the starting materials.

Unraveling the ecotoxicity of deep eutectic solvents using the mixture toxicity theory

The interest on deep eutectic solvents (DES) has been increasing. However, the ecotoxicological profile of DES is scarcely known. Also, despite previous studies showed that DES components dissociate in water, none assessed DES toxicity using the classical and adequate models for mixture toxicity prediction - concentration addition (CA) and independent action (IA). This study evaluates the ecotoxicological profile of DES based on [N₁₁₁₁]Cl, [N₂₂₂₂]Cl and [N₃₃₃₃]Cl as hydrogen bond acceptors (HBA) combined with hydrogen-bond donors (HBD) vis. ethylene glycol and 1-propanol, through the Microtox^® Acute Toxicity Test. CA and IA with deviations describing synergism/antagonism, dose-ratio and dose-level effects were fitted to the toxicity data. Neither the starting materials nor DES were found hazardous to Aliivibrio fischeri, in this specific case agreeing with the claimed "green character" of DES. Among the starting materials, ethylene glycol was the least toxic, whereas [N₃₃₃₃]Cl was the most toxic (30 min-EC₅₀ = 96.49 g L^-1 and 0.5456 g L^-1, respectively). DES toxicity followed the same trend as observed for the salts: [N₁₁₁₁]Cl-based DES < [N₂₂₂₂]Cl-based DES < [N₃₃₃₃]Cl-based DES. The IA model, with specific deviations, adjusted better in 5 out of 6 DES. Antagonism was observed for [N₁₁₁₁]Cl-based DES, and synergism for [N₃₃₃₃]Cl-based DES and for 1-propanol:[N₂₂₂₂]Cl. The application of the mixture toxicity models represents a breakthrough in the problematic of assessing the toxicity of the countless number of DES that can be created with the same starting materials, since they provide the expected toxicity of any virtual combination between HBA and HBD.

Research Progresses of Deep Eutectic Solvents and its Application in Separation and Catalysis

At present, traditional organic agents and catalyst have the lack of low efficiency, poor selectivity, toxicity, environmental pollution and so on. As a new type of green high efficient solvent and catalyst, deep eutectic solvents (DESs) have become one of the hotspots in the green chemistry field. In this paper, domestic and foreign research on DESs in separation and catalysis are reviewed in detail. Firstly, we summarize the characteristic properties of DESs. Secondly, the paper presents a review of DESs application in separation and catalysis. Thirdly, it point out the future research direction of DESs in separation and catalysis fields. All these provide comprehensive guidance in the future study and application of DESs.

Effect of Ionic Liquids on the Hatching of Artemia salina Cysts

We investigated the effect of six ionic liquids (ILs), and dimethylsulfoxide (DMSO) as a typical molecular liquid (organic solvent), on the hatching of Artemia salina cysts. The effect of an IL on the hatching of Artemia salina strongly depends on the specific combination of cation and anion. Of the ILs tested, choline acetate and choline chloride had a significantly lower toxicity. The level of inhabitation followed the order [chl][dhp] > [bmim][NO3] > [MAN][NO3] > [bmim][Ac] > DMSO > [chl][Ac] ≥ [chl][Cl].

Hydrophobic, Superabsorbing Aerogels from Choline Chloride-Based Deep Eutectic Solvent Pretreated and Silylated Cellulose Nanofibrils for Selective Oil Removal

Superabsorbents are highly appealing materials for use in cleaning up oil and chemical spills. However, the development of a low-cost, highly efficient superabsorbent remains a major challenge. This paper demonstrates a straightforward method of producing a cellulose nanofibril aerogel that is low-cost, ultralight, highly porous, hydrophobic, and reusable superabsorbing cellulose nanofibril aerogel from recycled waste fibers using a simple, environmentally friendly nanofibrillation treatment involving deep eutectic solvent and freeze-drying. Nanofibrillation and hydrophobic modification (silylation) of waste cellulose fibers resulted in nanofibril sponges with ultralow density (0.0029 g/cm³) and high porosity (up to 99.81%) after freeze-drying. These sponges exhibited excellent absorption performances for various oils and organic solvents and were reusable. In particular, the nanofibril aerogels showed selectivity in absorbing marine diesel oil from an oil-water mixture and possessed ultrahigh absorption capacities of up to 142.9 g/g, much higher than those of the commercial absorbent materials (i.e., polypropylene-based material) (8.1-24.6 g/g) that were used as references. The absorbed oil could easily be recovered by means of simple mechanical squeezing. In addition, the nanofibril sponges exhibited excellent reusability, maintaining a high capacity to absorb diesel oil for at least 30 cycles at 71.4-81.0% of capacity compared to a fresh absorbent. The above-mentioned advantages make cellulose nanofibril superabsorbents created from recycled waste cellulose fibers promising material for cleaning oil and chemical spills.

Applications of deep eutectic solvents in biotechnology and bioengineering-Promises and challenges

Deep eutectic solvents (DESs) have been touted recently as potential alternatives to ionic liquids (ILs). Although they possess core characteristics that are similar to those of ILs (e.g., low volatility, non-flammability, low melting points, low vapor pressure, dipolar nature, chemical and thermal stability, high solubility, and tuneability), DESs are superior in terms of the availability of raw materials, the ease of storage and synthesis, and the low cost of their starting materials. As such, they have become the subject of intensive research in various sectors, notably the chemical, electrochemical, and biological sectors. To date, the applications of DESs have shown great promise, especially in the medical and biotechnological fields. In spite of these various achievements, the safety concern for these mixtures must be sufficiently addressed. Indeed, in order to exploit the vast array of opportunities that DESs offer to the biological industry, first, they must be established as safe mixtures. Hence, the biotechnological applications of DESs only can be implemented if they are proven to have negligible or low toxicity profiles. This review is the first of its kind, and it discusses two current aspects of DES-based research. First, it describes the properties of these mixtures with ample focus on their toxicity profiles. Second, it provides an overview of the breakthroughs that have occurred and the foreseeable prospects of the use of DESs in various biotechnological and biological applications.

Production of lysozyme nanofibers using deep eutectic solvent aqueous solutions

Amyloid fibrils have recently gained a lot of attention due to their morphology, functionality and mechanical strength, allowing for their application in nanofiber-based materials, biosensors, bioactive membranes and tissue engineering scaffolds. The in vitro production of amyloid fibrils is still a slow process, thus hampering the massive production of nanofibers and its consequent use. This work presents a new and faster (2-3h) fibrillation method for hen egg white lysozyme (HEWL) using a deep eutectic solvent based on cholinium chloride and acetic acid. Nanofibers with dimensions of 0.5-1μm in length and 0.02-0.1μm in thickness were obtained. Experimental variables such as temperature and pH were also studied, unveiling their influence in fibrillation time and nanofibers morphology. These results open a new scope for protein fibrillation into nanofibers with applications ranging from medicine to soft matter and nanotechnology.

Combination of deep eutectic solvent and ionic liquid to improve biocatalytic reduction of 2-octanone with Acetobacter pasteurianus GIM1.158 cell

The efficient anti-Prelog asymmetric reduction of 2-octanone with Acetobacter pasteurianus GIM1.158 cells was successfully performed in a biphasic system consisting of deep eutectic solvent (DES) and water-immiscible ionic liquid (IL). Various DESs exerted different effects on the synthesis of (R)-2-octanol. Choline chloride/ethylene glycol (ChCl/EG) exhibited good biocompatibility and could moderately increase the cell membrane permeability thus leading to the better results. Adding ChCl/EG increased the optimal substrate concentration from 40 mM to 60 mM and the product e.e. kept above 99.9%. To further improve the reaction efficiency, water-immiscible ILs were introduced to the reaction system and an enhanced substrate concentration (1.5 M) was observed with C₄MIM·PF₆. Additionally, the cells manifested good operational stability in the reaction system. Thus, the efficient biocatalytic process with ChCl/EG and C₄MIM·PF₆ was promising for efficient synthesis of (R)-2-octanol.

Toxicity profile of choline chloride-based deep eutectic solvents for fungi and Cyprinus carpio fish

An investigation on the toxicological assessment of 10 choline chloride (ChCl)-based deep eutectic solvents (DESs) towards four fungi strains and Cyprinus carpio fish was conducted. ChCl was combined with materials from different chemical groups such as alcohols, sugars, acids and others to form DESs. The study was carried out on the individual DES components, their aqueous mixture before DES formation and their formed DESs. The agar disc diffusion method was followed to investigate their toxicity on four fungi strains selected as a model of eukaryotic microorganisms (Phanerochaete chrysosporium, Aspergillus niger, Lentinus tigrinus and Candida cylindracea). Among these DESs, ChCl:ZnCl2 exhibited the highest inhibition zone diameter towards the tested fungi growth in vitro, followed by the acidic group (malonic acid and p-toluenesulfonic acid). Another study was conducted to test the acute toxicity and determine the lethal concentration at 50 % (LC50) of the same DESs on C. carpio fish. The inhibition range and LC50 of DESs were found to be different from their individual components. DESs were found to be less toxic than their mixture or individual components. The LC50 of ChCl:MADES is much higher than that of ChCl:MAMix. Moreover, the DESs acidic group showed a lower inhibition zone on fungi growth. Thus, DESs should be considered as new components with different physicochemical properties and toxicological profiles, and not merely compositions of compounds.

Evaluation of sodium acetate trihydrate–urea DES as a benign reaction media for the Biginelli reaction. Unexpected synthesis of methylenebis(3-hydroxy-5,5-dimethylcyclohex-2-enones), hexahydroxanthene-1,8-diones and hexahydroacridine-1,8-diones

In this work, the low melting mixture sodium acetate trihydrate–urea was synthesized and the eutectic composition was determined and characterized. The performance of this deep eutectic solvent on the Biginelli reaction was evaluated.

Hydrothermal liquefaction of de-oiled Jatropha curcas cake using Deep Eutectic Solvents (DESs) as catalysts and co-solvents

Biomass liquefaction using ionic liquids (ILs) as catalysts has received appreciable attention, in renewable fuels and chemicals production, recently. However, issues associated with the production cost, long reaction time and use of volatile solvents are undeniably challenging. Thus, Deep Eutectic Solvents (DESs) emerged as promising and potential ILs substitutes. The hydrothermal liquefaction of de-oiled Jatropha curcas cake was catalyzed by four synthesized DESs as catalysts and co-solvents for selective extraction. Proximate and ultimate analyses including ash, moisture and carbon contents of bio-crude produced varied slightly. The higher heating values found ranges from 21.15 ± 0.82 MJ/kg to 24.30 ± 0.98 MJ/kg. The bio-crude yields obtained using ChCl-KOH DES was 43.53 wt% and ChCl-p-TsOH DES was 38.31 wt%. Bio-crude yield using ChCl-FeCl3 DES was 30.80 wt%. It is suggested that, the selectivity of bio-crude could be improved, by using DESs as catalyst and co-solvent in HTL of biomass such as de-oiled J. curcas cake.

Characterization of natural low transition temperature mixtures (LTTMs): Green solvents for biomass delignification

The aim of this work was to characterize the natural low transition temperature mixtures (LTTMs) as promising green solvents for biomass pretreatment with the critical characteristics of cheap, biodegradable and renewable, which overcome the limitations of ionic liquids (ILs). The LTTMs were derived from inexpensive commercially available hydrogen bond acceptor (HBA) and l-malic acid as the hydrogen bond donor (HBD) in distinct molar ratios of starting materials and water. The peaks involved in the H-bonding shifted and became broader for the OH groups. The thermal properties of the LTTMs were not affected by water while the biopolymers solubility capacity of LTTMs was improved with the increased molar ratio of water and treatment temperature. The pretreatment of oil palm biomass was consistence with the screening on solubility of biopolymers. This work provides a cost-effective alternative to utilize microwave hydrothermal extracted green solvents such as malic acid from natural fruits and plants.

Deep Eutectic Mixture Catalysed the Synthesis of Disulfides Using Bunte Salts as Thiol Surrogates

Bunte salts, easily prepared from odourless sodium thiosulfates and various alkyl and aryl halides, acted as thiol surrogates for preparation of disulfides in the presence of hydrogen peroxide and a Brønsted-acidic deep eutectic mixture. The reaction proceeded smoothly to give the corresponding disulfide products in moderate to good yields, leaving odourless sodium bisulfite and water as the by-products. Moreover, this catalytic system could be readily recovered and reused several times without significant loss in activity.

In Vitro and In Vivo toxicity profiling of ammonium-based deep eutectic solvents

The cytotoxic potential of ammonium-based deep eutectic solvents (DESs) with four hydrogen bond donors, namely glycerine (Gl), ethylene glycol (EG), triethylene glycol (TEG) and urea (U) were investigated. The toxicity of DESs was examined using In Vitro cell lines and In Vivo animal model. IC50 and selectivity index were determined for the DESs, their individual components and their combinations as aqueous solutions for comparison purposes. The cytotoxicity effect of DESs varied depending on cell lines. The IC50 for the GlDES, EGDES, UDES and TEGDES followed the sequence of TEGDES< GlDES< EGDES< UDES for OKF6, MCF-7, A375, HT29 and H413, respectively. GlDES was selective against MCF-7 and A375, EGDES was selective against MCF-7, PC3, HepG2 and HT29, UDES was selective against MCF-7, PC3, HepG2 and HT29, and TEGDES was selective against MCF-7 and A375. However, acute toxicity studies using ICR mice showed that these DESs were relatively toxic in comparison to their individual components. DES did not cause DNA damage, but it could enhance ROS production and induce apoptosis in treated cancer cells as evidenced by marked LDH release. Furthermore, the examined DESs showed less cytotoxicity compared with ionic liquids. To the best of our knowledge, this is the first time that combined In Vitro and In Vivo toxicity profiles of DESs were being demonstrated, raising the toxicity issue of these neoteric mixtures and their potential applicability to be used for therapeutic purposes.

Room temperature deep eutectic solvents of (1S)-(+)-10-camphorsulfonic acid and sulfobetaines: hydrogen bond-based mixtures with low ionicity and structure-dependent toxicity

Preparation, properties and toxicity of room temperature deep eutectic solvents formed by (1S)-(+)-10-camphorsulfonic acid and aromatic, aliphatic and amphiphilic sulfobetaines.