Solid acids: Green alternatives for acid catalysis

Efficient synthesis of tributyl citrate plasticizer via esterification reaction using SO4 2-/ZrO2-TiO2 as catalysts

Tributyl citrate, an environment-friendly and nontoxic plasticizer, is commonly synthesized via the esterification of citric acid and n-butanol. Highly effective SO4 2-/ZrO2-TiO2 catalysts were prepared by coprecipitation and impregnation for tributyl citrate production. The excellent conversion of 95.1% for citric acid and selectivity of 98.8% for tributyl citrate were achieved over a 3SO4 2-/ZrO2-TiO2 (4 : 1) catalyst with Zr/Ti mole ratio ∼4/1 under optimal reaction conditions of 120 °C and acid-to-alcohol ratio of 1/5. The textural and surface properties of the catalysts were characterized by nitrogen adsorption-desorption, XRD, pyridine-FTIR, etc. The characterization results confirmed that the addition of TiO2 promoted the formation of ZrO2 tetragonal phase to a certain extent, increased the specific surface area of the catalyst, stabilized the combination of SO4 2- and ZrO2, and reduced the loss of active sites. At the same time, the 3SO4 2-/ZrO2-TiO2 (4 : 1) catalyst has stronger acidity and higher acid content, which greatly improves the activity and stability of the catalyst. No significant decrease in the catalytic activity and selectivity were found during 10 runs. A promising solid acid catalyst with an excellent performance was developed for esterification reactions.

Acid-Catalyzed Conversion of Cannabidiol to Tetrahydrocannabinols: En Route to Demystifying Manufacturing Processes and Controlling the Reaction Outcomes

Background: Over the last decade, there has been a significant increase in the production of multiple tetrahydrocannabidiol (THC) related products via the acid catalysis of cannabidiol (CBD). The widespread availability of CBD and the unregulated or poorly regulated nature of its use have flooded the market with THC-containing products of unverifiable provenance and frequently contaminated by trace metals and residual solvents. Under non-optimized, poorly controlled, or harsh reaction conditions, these acid-catalyzed transformations yield multiple cannabinoids including Δ9-THC and Δ8-THC, along with numerous side products. These side products are rarely identified or quantified accurately, and their safety and pharmacology remain largely unknown. Aims: This review aims to present an up-to-date understanding of one of the fundamental transformations in cannabinoid chemistry: the cyclization of CBD to THC. This knowledge will facilitate the development of safer, cleaner, more affordable, and accessible cannabinoid products while guiding medical practitioners and regulators. Materials and Methods: We conducted a literature review of studies published over the last 5-6 years on the interconversion of CBD to THC. Our review focused on the following key aspects: (1) advances in understanding reaction mechanisms and optimizing desirable reaction outcomes; (2) development of new catalysts, including "green chemistry" approaches such as solid-supported acids; and (3) implementation of fit-for-purpose analytical methods to better characterize reaction outcomes and reassess the accuracy of cannabis and hemp product labeling. Results: Provided strict quality controls of materials, reaction conditions, and related isolation techniques, the latest research of the acid-catalyzed CBD cyclization shows that it is feasible to access products with elevated and consistently high quality, enriched with either CBD or THC fractions, in a cost-effective manner. Among a spectrum of possible products, easy access to low-potency THC compositions may be particularly relevant for serving the needs of medical patients consuming cannabis and hemp-derived cannabinoids including dose titration as well as to supporting safe and responsible use in recreational markets now saturated with overly potent products.

Phase Effects in Zirconia Catalysed Glucose Conversion to 5-(Hydroxymethyl)furfural

5-(hydroxymethyl)furfural (HMF) is a key biomass derived platform chemical used to produce fuel precursors or additives and value-added chemicals, synthesised by the cascade isomerisation of glucose and subsequent dehydration of reactively formed fructose to HMF over Lewis and Bronsted acid catalysts, respectively. Zirconia is a promising catalyst for such reactions; however, the impact of acid properties of different zirconia phases is poorly understood. In this work, we unravel the role of the zirconia crystalline phase in glucose isomerisation and fructose dehydration to HMF. The Lewis acidic monoclinic phase of zirconia is revealed to preferentially facilitate glucose isomerisation, while the nanoparticulate tetragonal phase possesses Brønsted acid sites which favour fructose dehydration. Synergy between both zirconia phases facilitates cascade HMF production, with both catalysts investigated as physical mixtures in batch and flow reactor configurations. Using a physical mixture of only 15 wt % m-ZrO2 with 85 wt % t-ZrO2 in either batch or packed bed reactor configuration is sufficient to reach equilibrium conversion of glucose for subsequent dehydration by the t-ZrO2 component. Under continuous flow, a six-fold increase in HMF production was obtained when operating with a physical mixture of m- and t-ZrO2 compared to that from a single bed of t-ZrO2.

Recent Progress in the Synthesis of Benzoxazin-4-Ones, Applications in N-Directed Ortho-Functionalizations, and Biological Significance

The development of efficient synthetic procedures to access fused N, O-heterocyclic skeletons has been a pivotal research topic in organic synthesis for several years. Owing to the applications of N, O-fused heterocycles in organic synthesis, material sciences, and medicinal chemistry, significant efforts have been dedicated to design novel methods for their construction. To this end, 1,3-benzoxazin-4-ones are privileged candidates for N, O-heterocyclic molecules often found in natural products, agrochemicals, and materials science applications. In this review, we aim to summarize the existing literature on the synthesis of 1,3-benzoxazin-4-ones from 2010 onwards. Moreover, 1,3-benzoxazin-4-ones have also been identified as an excellent native directing group for the ortho-functionalization via C-H activation, which is often a strenuous task requiring pre-functionalized substrates. In the latter part of this report, we compiled several interesting examples of N-directed functionalizations of 1,3-benzoxazin-4-ones. Additionally, to emphasize biological importance, recent developments on the anticancer evaluations of benzoxazine-4-one core are included. We believe that by harnessing the methodologies discussed herein, new possibilities could be unlocked for the synthesis of fused N, O-heterocycles, leading to the development of novel biologically active compounds and functional materials.

Generation of Acid Sites in Nanostructured KIT-6 Using Different Methods to Obtain Efficient Acidic Catalysts for Glycerol Acetalization to Solketal

This study explored the preparation of pure silica KIT-6, as well as KIT-6 materials with an enhanced concentration of surface OH groups through aluminum incorporation or NH4F treatment. These materials with various contents of surface OH groups were subsequently modified via the post-synthesis grafting of sulfonic groups using 3-mercaptopropyltrimethoxysilane as a precursor, followed by oxidation to introduce acidic sites. The catalysts were thoroughly characterized using XRD, nitrogen adsorption/desorption, SEM-EDS, TEM, and FT-IR techniques to confirm their structural and chemical properties. The catalytic activity of acid-functionalized mesoporous silicas of the KIT-6 structure was further evaluated in the acetalization of glycerol to produce solketal. The results demonstrated a significant influence of the surface OH group concentration and acidic site density on catalytic performance, with KIT-6_F_SO3H showing the highest efficiency in glycerol-to-solketal conversion. This study provides valuable insights into the design of efficient catalytic systems for the valorization of biodiesel-derived glycerol into high-value chemicals, offering a sustainable approach to waste glycerol utilization.

Solid acids as cocatalysts in the chelation-assisted hydroacylation of alkenes and alkynes

The use of homogeneous Brønsted acid cocatalysts (such as benzoic acid) in hydroacylation reactions via imine intermediates has been extensively studied. However, the use of heterogeneous cocatalysts has been limited to montmorillonite K10. Thus, we can use other solid acids to increase the efficiency of the reaction. In this study, we describe the effects of sulfated zirconia, Al-MCM-41 or superacid modified montmorillonite on the hydroacylation of alkenes and alkynes with aldehydes via imine intermediates and in the presence of the Wilkinson complex. Furthermore, we addressed the dual role of montmorillonite, a redox reagent in the presence of TEMPO and an acid solid, allowing the direct use of benzyl alcohols as substrates to generate saturated or α,β-unsaturated ketones.

New insight into highly efficient CSA@g-C3N4 for photocatalytic oxidation of benzyl alcohol and thioanisole: NAEDS as a promoter of photoactivity under blue LED irradiation

An open new perspective has been established toward synthesizing eco-friendly CSA@g-C3N4 employing surface engineering. The carbon nitride modified through camphorsulfonic acid was designed and developed in a category of the new generation of photocatalysts for the oxidation of benzyl alcohol and thioanisole in the existence of a natural deep eutectic solvent (NADES). In comparison with pure g-C3N4, not only does CSA@g-C3N4 exhibit an extraordinarily higher ability for harvesting visible light stemming from declining the recombination rate of electrons/holes dependent on PL results but it also reveals notable photocatalytic oxidation capability in the transformation of alcohols as well as thiols into relevant compounds. In addition, non-metal compound (CSA) incorporation would result in considerably diminishing the energy band gap value from 2.8 to 2.28 eV to escalate the visible-light absorption of g-C3N4. While the conventional consensus implies that inherent properties of photocatalysts bring on high photoactivity, this study indicates that deploying choline chloride-urea deep eutectic solvent as an external factor plays the role of photoactivity accelerator. Furthermore, readily recycling and reusability can be achieved for the photocatalytic setup of CSA@g-C3N4 ascribed to its heterogeneous nature with no drop in the photoactivity.

A novel magnetic FSM-16 supported ionic liquid/Pd complex as a high performance and recyclable catalyst for the synthesis of pyrano[3,2-c]chromenes

In this work, Fe3O4@FSM-16/IL-Pd was successfully designed and synthesized via a new procedure of palladium(ii) complex immobilization onto magnetic FSM-16 using an ionic liquid, as a novel heterogeneous nanocatalyst. Multiple techniques were employed to characterize this magnetic nanocatalyst such as Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), Field Emission Scanning Electron Microscopy (FE-SEM), thermogravimetric analysis (TGA), Transmission electron microscopy (TEM), and Vibrating Sample Magnetometry (VSM). After complete characterization of the catalyst, its catalytic activity was used for the synthesis of pyrano[3,2-c]chromene-3-carbonitriles via the reaction of 4-hydroxycoumarin, aldehyde, and malononitrile under solvent-free conditions. Also, it can be recovered and reused several times without a significant decrease in its catalytic activity or palladium leaching.

The Overlooked Potential of Sulfated Zirconia: Reexamining Solid Superacidity Toward the Controlled Depolymerization of Polyolefins

Closed-loop recycling via an efficient chemical process can help alleviate the global plastic waste crisis. However, conventional depolymerization methods for polyolefins, which compose more than 50% of plastics, demand high temperatures and pressures, employ precious noble metals, and/or yield complex mixtures of products limited to single-use fuels or oils. Superacidic forms of sulfated zirconia (SZrO) with Hammet Acidity Functions (H0) ≤ - 12 (i.e., stronger than 100% H2SO4) are industrially deployed heterogeneous catalysts capable of activating hydrocarbons under mild conditions and are shown to decompose polyolefins at temperatures near 200 °C and ambient pressure. Additionally, confinement of active sites in porous supports is known to radically increase selectivity, coking and sintering resistance, and acid site activity, presenting a possible approach to low-energy polyolefin depolymerization. However, a critical examination of the literature on SZrO led us to a surprising conclusion: despite 40 years of catalytic study, engineering, and industrial use, the surface chemistry of SZrO is poorly understood. Ostensibly spurred by SZrO's impressive catalytic activity, the application-driven study of SZrO has resulted in deleterious ambiguity in requisite synthetic conditions for superacidity and insufficient characterization of acidity, porosity, and active site structure. This ambiguity has produced significant knowledge gaps surrounding the synthesis, structure, and mechanisms of hydrocarbon activation for optimized SZrO, stunting the potential of this catalyst in olefin cracking and other industrially relevant reactions, such as isomerization, esterification, and alkylation. Toward mitigating these long extant issues, we herein identify and highlight these current shortcomings and knowledge gaps, propose explicit guidelines for characterization of and reporting on characterization of solid acidity, and discuss the potential of pore-confined superacids in the efficient and selective depolymerization of polyolefins.

Nanostructured Solid/Liquid Acid Catalysts for Glycerol Esterification: The Key to Convert Liability into Assets

Owing to the growing concerns about the dwindling fossil fuel reserves, increasing energy demand, and climate emergency, it is imperative to develop and deploy sustainable energy technologies to ensure future energy supply and to transition to the net-zero world. In this context, there is great potential in the biorefinery concept for supplying drop in biofuels in the form of biodiesel. Biodiesel as a fuel can certainly bridge the gap where electrification or the use of hydrogen is not feasible, for instance, in heavy vehicles and in the farm and marine transportation sectors. However, the biodiesel industry also generates a large amount of crude glycerol as the by-product. Due to the presence of several impurities, crude glycerol may not be a suitable feedstock for all high-value products derived from glycerol, but it fits well with glycerol esterification for producing glycerol acetins, which have numerous applications. This review critically looks at the processes using nanostructured solid/liquid acid catalysts for glycerol esterification, including the economic viability of the scale-up. The homogeneous catalysts reviewed herein include mineral acids and Brønsted acidic ionic liquids, such as SO3H-functionalized and heteropoly acid based ionic liquids. The heterogeneous catalysts reviewed herein include solid acid catalysts such as metal oxides, ion-exchange resins, zeolites, and supported heteropoly acid-based catalysts. Furthermore, the techno-economic analysis studies have shown the process to be highly profitable, confirming the viability of glycerol esterification as a potential tool for economic value addition to the biorefinery industry.

Unveiling the mechanisms of carboxylic acid esterification on acid zeolites for biomass-to-energy: A review of the catalytic process through experimental and computational studies

In recent years, there has been significant interest from industrial and academic areas in the esterification of carboxylic acids catalyzed by acidic zeolites, as it represents a sustainable and economically viable approach to producing a wide range of high-value-added products. However, there is a lack of comprehensive reviews that address the intricate reaction mechanisms occurring at the catalyst interface at both the experimental and atomistic levels. Therefore, in this review, we provide an overview of the esterification reaction on acidic zeolites based on experimental and theoretical studies. The combination of infrared spectroscopy with atomistic calculations and experimental strategies using modulation excitation spectroscopy techniques combined with phase-sensitive detection is presented as an approach to detecting short-lived intermediates at the interface of zeolitic frameworks under realistic reaction conditions. To achieve this goal, this review has been divided into four sections: The first is a brief introduction highlighting the distinctive features of this review. The second addresses questions about the topology and activity of different zeolitic systems, since these properties are closely correlated in the esterification process. The third section deals with the mechanisms proposed in the literature. The fourth section presents advances in IR techniques and theoretical calculations that can be applied to gain new insights into reaction mechanisms. Finally, this review concludes with a subtle approach, highlighting the main aspects and perspectives of combining experimental and theoretical techniques to elucidate different reaction mechanisms in zeolitic systems.

Insights into Preparation Methods and Functions of Carbon-Based Solid Acids

With the growing emphasis on green chemistry and the ecological environment, researchers are increasingly paying attention to greening materials through the use of carbon-based solid acids. The diverse characteristics of carbon-based solid acids can be produced through different preparation conditions and modification methods. This paper presents a comprehensive summary of the current research progress on carbon-based solid acids, encompassing common carbonization methods, such as one-step, two-step, hydrothermal, and template methods. The composition of carbon source material may be the main factor affecting its carbonization method and carbonization temperature. Additionally, acidification types including sulfonating agent, phosphoric acid, heteropoly acid, and nitric acid are explored. Furthermore, the functions of carbon-based solid acids in esterification, hydrolysis, condensation, and alkylation are thoroughly analyzed. This study concludes by addressing the existing drawbacks and outlining potential future development prospects for carbon-based solid acids in the context of their important role in sustainable chemistry and environmental preservation.

Rapid Lewis Acid Screening and Reaction Optimization Using 3D-Printed Catalyst-Impregnated Stirrer Devices in the Synthesis of Heterocycles

We describe the development of Lewis acid (LA) catalyst-impregnated 3D-printed stirrer devices and demonstrate their ability to facilitate the rapid screening of reaction conditions to synthesize heterocycles. The stereolithography 3D-printed stirrer devices were designed to fit round-bottomed flasks and Radleys carousel tubes using our recently reported solvent-resistant resin, and using CFD modeling studies and experimental data, we demonstrated that the device design leads to rapid mixing and rapid throughput over the device surface. Using a range of LA 3D-printed stirrers, the reaction between a diamine and an aldehyde was optimized for the catalyst and solvent, and we demonstrated that use of the 3D-printed catalyst-embedded devices led to higher yields and reduced reaction times. A library of benzimidazole and benzothiazole compounds were synthesized, and the use of devices led to efficient formation of the product as well as low levels of the catalyst in the resultant crude mixture. The use of these devices makes the process of setting up multiple reactions simpler by avoiding weighing out of catalysts, and the devices, once used, can be simply removed from the reaction, making the process of compound library synthesis more facile.

Kinetic Analysis of Glycerol Esterification Using Tin Exchanged Tungstophosphoric Acid on K-10

Glycerol acetins (mono-, di-, and tri) are produced via esterification with acetic acid. The acetins are commercially important industrial chemicals including their application as fuel additives, thus significant to environmental sustainability and economic viability of the biorefinery industry. Glycerol esterification with acetic acid was studied using partial tin exchanged tungstophosphoric acid supported on montmorillonite K-10 as catalysts. Partially exchanging the H+ ion of DTP with Sn (x = 1) increased the acidity of the catalyst and showed an increase in the catalytic activity as compared to the DTP/K-10 catalyst. A series of tin exchanged tungstophosphoric acid (20% w/w) supported on montmorillonite K-10 clay (Snx-DTP/K-10, where x = 0.5-1.5) were synthesized and thoroughly characterized by using BET, XRD, FT-IR, UV-vis, and titration techniques. Among various catalysts, Sn1-DTP/K-10 was found to be the most active catalyst for glycerol esterification. Effects of different reaction parameters were studied and optimized to get high yields of glycerol triacetin. A suitable kinetic model of the reaction was fitted, and the Langmuir-Hinshelwood (L-H) dual-site model was able to describe the experimental data with high agreement between the experimental and calculated results. The prepared catalyst could be recycled at least four times without significant loss of activity. The overall process is green and environment friendly.

CSA@g-C3N4 as a novel, robust and efficient catalyst with excellent performance for the synthesis of 4H-chromenes derivatives

A pioneering robust and green heterogeneous acidic catalyst (CSA@g-C3N4) was rationally designed via immobilization of camphorsulfonic acid (CSA) on the g-C3N4 surface under mild conditions. Grafting CSA in the g-C3N4 lattice is distinguished as the root cause of facilitating the structure change of g-C3N4, leading to a unique morphology, accordingly the remarkable catalytic efficiency of CSA@g-C3N4. The morphology of new as-prepared nano-catalyst was specified by means of FT-IR, XRD, SEM, EDS, TEM, TGA, and BET. For the first time, it is exhibited that the efficient catalyst CSA@g-C3N4 can productively accomplish the three-component reactions with high yields and also serve as an inspiration for easily performing various sorts of MCRs based on our finding. The recommended synthesis pathway of chromenes derivatives is facile and cost-effective which applies a condensation reaction of salicylaldehyde, thiophenol, and malononitrile followed by ready purification in a benign manner. Moreover, the CSA@g-C3N4 nanocomposite can be promptly reused, illustrating no sensational decrease in the catalytic activity after ten times.

Hierarchical Zeolites Containing Vanadium or Tantalum and Their Application in Cyclohexene Epoxidation Reaction

The aim of this study was the synthesis, characterization, and catalytic application of new hierarchical materials modified with tantalum and vanadium ions. These materials exhibit secondary porosity, thus allowing the reactant molecules to access the active sites of the material while maintaining the acidity and crystallinity of the zeolites. Based on the results, these systems were found to be highly active and selective in the oxidation of cyclohexene. The performance of the catalysts was compared in oxidation processes carried out by conventional and microwave-assisted methods. Microwave-assisted experiments showed that in the presence of a hierarchical FAU zeolite containing Ta, long reaction times could be shortened with increased activity and selectivity under the same residual experimental conditions.

Ultrasound-Promoted preparation and application of novel bifunctional core/shell Fe3O4@SiO2@PTS-APG as a robust catalyst in the expeditious synthesis of Hantzsch esters

In this work, D-(-)-α-phenylglycine (APG)-functionalized magnetic nanocatalyst (Fe₃O₄@SiO₂@PTS-APG) was designed and successfully prepared in order to implement the principles of green chemistry for the synthesis of polyhydroquinoline (PHQ) and 1,4-dihydropyridine (1,4-DHP) derivatives under ultrasonic irradiation in EtOH. After preparing of the nanocatalyst, its structure was confirmed by different spectroscopic methods or techniques including Fourier transform infrared (FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and thermal gravimetric analysis (TGA). The performance of Fe₃O₄@SiO₂@PTS-APG nanomaterial, as a heterogeneous catalyst for the Hantzsch condensation, was examined under ultrasonic irradiation and various conditions. The yield of products was controlled under various conditions to reach more than 84% in just 10 min, which indicates the high performance of the nanocatalyst along with the synergistic effect of ultrasonic irradiation. The structure of the products was identified by melting point as well as FTIR and ¹H NMR spectroscopic methods. The Fe₃O₄@SiO₂@PTS-APG nanocatalyst is easily prepared from commercially available, lower toxic and thermally stable precursors through a cost-effective, highly efficient and environmentally friendly procedure. The advantages of this method include simplicity of the operation, reaction under mild conditions, the use of an environmentally benign irradiation source, obtaining pure products with high efficiency in short reaction times without using a tedious path, which all of them address important green chemistry principles. Finally, a reasonable mechanism is proposed for the preparation of polyhydroquinoline (PHQ) and 1,4-dihydropyridine (1,4-DHP) derivatives in the presence of Fe₃O₄@SiO₂@PTS-APG bifunctional magnetic nanocatalyst.

One-Pot Synthesis of Monofunctionalized Oligoethylene Glycols through Ring-Opening and Heterogeneous Hydrolysis of Macrocyclic Sulfates

The one-pot nucleophilic ring-opening reaction of oligoethylene glycol macrocyclic sulfates provides an efficient strategy for the monofunctionalization of oligoethylene glycols without protecting or activating group manipulation. In this strategy, the hydrolysis process is generally promoted by sulfuric acid, which is hazardous, difficult to handle, environmentally unfriendly, and unfit for industrial operation. Here, we explored a convenient handling solid acid, Amberlyst-15, as a replacement for sulfuric acid to accomplish the hydrolysis of sulfate salt intermediates. With this method, 18 valuable oligoethylene glycol derivatives were prepared with high efficiency, and gram-scale applicability of this method has been successfully demonstrated to afford a clickable oligoethylene glycol derivative 1b and a valuable building block 1g for F-19 magnetic resonance imaging traceable biomaterial construction.

Glycerol based carbon sulfonic acid catalyzed synthesis, in silico studies and in vitro biological evaluation of isonicotinohydrazide derivatives as potent antimicrobial and anti-tubercular agents

The present pathway involves synthesis of isonicotinohydrazide derivatives using isoniazid and diversely substituted aldehydes in the presence of EtOH and catalytic amount of glycerol based carbon sulfonic acid catalyst. The developed pathway has so many merits like excellent yields (91-98%), short reaction time (4-10 min), easy reaction set up, no need of column chromatography, large substrate scope, easily recyclable and reusable catalyst. The synthesized compounds were screened for antimicrobial and anti-tubercular activity and it was observed that compounds possessed high biological potency against the Gram positive and Gram negative bacterial and fungal strains. Regarding anti-tubercular activity, compound 3m exhibited high % inhibition against Mycobacterium tuberculosis H₃₇RV strain. Based on the outcome of in vitro studies, all the synthesized compounds were docked against E. coli (1KZN), C. albicans (1IYL), and M. tuberculosis H ₃₇ Rv strain (2NSD). The synthesized derivatives were docked within the binding site of 1KZN, and 1IYL. However, with 2NSD, apart from 3h, all the derivatives displayed interaction within the binding cavity of the protein. All the crucial interactions with Asn46, Asp73, and Arg136 in 1KZN, His227, Leu451 in 1IYL, and Tyr158 in 2NSD were witnessed in the top-scored docked candidates. Molecular docking studies revealed the importance of the substitution at R position on isonicotinohydrazide scaffold. The nitrogen atoms of hydrazide moiety were involved in forming hydrogen bonding with the active site amino acids, and the substitution at the R position occupy the hydrophobic position in the binding pocket. Also, the functional groups present on the substituted R position were involved in forming hydrogen bonding with the crucial active site residues.

KIT-5 Structural and Textural Changes in Response to Different Methods of Functionalization with Sulfonic Groups

In this project, KIT-5 materials were effectively functionalized with sulfonic groups introduced by grafting or the co-condensation method and tested as heterogeneous solid acid catalyst. A co-condensation procedure leading to the stable, -SO₃H functionalized KIT-5 materials was successfully established. Moreover, the influence of both synthesis methods on the structural and textural parameters, as well as surface chemistry, morphology, and catalytic activity of -SO₃H/KIT-5 materials was thoroughly investigated. The syntheses with 3-mepkaptopropyltrimethoxysilane (MPTMS) acting as a modifying agent resulted in samples in which functional groups were introduced into the structure and/or onto the mesoporous silica surface. The oxidation stage of -SH to -SO₃H groups was carried out under mild conditions, using a "green" oxidant (H₂O₂). The application of different functionalization techniques and the introduction of different amounts of modifying agent allowed for an evaluation of the influence of these parameters on the ordering of the mesoporous structure of KIT-5 materials. The applied methods of assessment of the physicochemical parameters (XRD, low-temperature N₂ sorption, TEM) showed that, especially when the co-condensation method was applied, as the number of functional groups increased, the ordering of structure characteristic of KIT-5 decreased. On the other hand, the samples modified by grafting had a stable structure, regardless of the amount of introduced MPTMS. Test reactions carried out on the basis of Friedel-Crafts alkylation process showed that the synthesized materials can be considered promising acid catalysts in heterogeneous catalysis reactions.

High-efficiency catalyst CuSO4/SBA-15 toward butylated hydroxytoluene synthesis in a heterogeneous system

An SBA-15 loaded CuSO₄ catalyst was designed and prepared for the highly selective production of 2,6-di-tert-butyl-p-cresol (BHT) from p-cresol and isobutylene. The acidity of solid acid catalysts was altered by varying the loading amount of CuSO₄. Among them, 10% CuSO₄/SBA-15 exhibited the greatest catalytic performance in the alkylation reaction with a BHT yield of 85.5%. After four cycles, the yield of BHT exceeded 70%. Overall, the catalyst has excellent catalytic performance and can be utilized as a catalyst for efficient BHT production.

Conformational Control of Organocatalyst in Strongly Brønsted-Acidic Metal-Organic Frameworks for Enantioselective Catalysis

Chiral imidodiphosphates (IDPs) have emerged as strong Brønsted acid catalysts for many enantioselective processes. However, the dynamic transformation between O,O-syn and O,O-anti conformers typically results in low enantioselectivity. Here we demonstrate that topologies of metal-organic frameworks (MOFs) can be exploited to control IDP conformations and local chiral microenvironments for enantioselective catalysis. Two porous Dy-MOFs with different topologies are obtained from an enantiopure 1,1'-biphenol IDP-based tetracarboxylate ligand. While the ligand adopts a 4- or 3-connected (c) binding mode, all IDPs are rigidified to get only a single O,O-syn conformation and display greatly enhanced Brønsted acidity relative to the free IDP. The MOF with the 4-c IDP that has a relatively less compact shape than the 3-c IDP can be an efficient and recyclable heterogeneous Brønsted acid catalysing the challenging asymmetric O,O-acetalization reaction with up to 96 % enantiomeric excess.

A new and straightforward route to synthesize novel pyrazolo[3,4-b]pyridine-5-carboxylate scaffolds from 1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles

Among many acidic catalysts, amorphous carbon-supported sulfonic acid (AC-SO₃H) has been evaluated as a new-generation solid catalyst with outstanding activity. Because of the -SO₃H groups, the surface properties of the amorphous carbon catalyst were improved, which made the catalytic activity of the amorphous carbon-supported sulfonic acid many times greater than that of sulfuric acid. The amorphous carbon-supported sulfonic acid exhibited several advantages such as low cost, non-toxicity, porosity, stability, and easily adjustable chemical surface. In this paper, we introduce a new pathway for the synthesis of pyrazolo[3,4-b]pyridine-5-carboxylate scaffolds from 1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles and aniline at room temperature under ethanol in the presence of AC-SO₃H as the catalyst. This method provided the desired products with moderate to good yields. The gram-scale synthesis of the major product was carried out with good yields (up to 80%). This strategy involves a sequential opening/closing cascade reaction. This approach presents several advantages, including room temperature conditions, short reaction time, and operational simplicity.

A Schiff base complex of lanthanum on modified MCM-41 as a reusable nanocatalyst in the homoselective synthesis of 5-substituted 1H-tetrazoles

In this work, mesoporous MCM-41 was modified by a new Schiff-base formed from the condensation of triethylenetatramine and 5-bromosalicylaldehyde. Then, it was used for the stabilization of lanthanum metal (La-Schiff base@MCM-41) as a homoselective, reusable, efficient and biocompatible catalyst in the synthesis of 5-substituted 1H-tetrazole derivatives. The synthesized tetrazoles were characterized using ¹H NMR and FT-IR spectroscopy and methods to measure their physical properties. La-Schiff base@MCM-41 was characterized by using various techniques such as ICP, CHN, XRD, TGA, BET, FT-IR spectroscopy, SEM, EDS and WDX. This catalyst has good stability and a heterogeneous nature, enabling it to be easily recovered and reused several times without significant loss in catalytic activity. This present strategy has important advantages such as utilizing PEG as a green solvent, short reaction times, excellent yields, easy recycling of the catalyst and pure separation of the products. The recovered La-Schiff base@MCM-41 catalyst was characterized by using FT-IR spectroscopy, SEM and AAS.

A Mild Silica Gel Promoted Synthesis and Initial Functional Study of Tetrapyridyl Tetrahydropyrrolopyrrolones

A one-pot strategy with yields up to 82% was reported to generate 2-(pyridin-2-yl)-2-(3,3a,6-tris(5-pyridin-2-yl)-5-oxohexahydropyrrolo[3,2-b] pyrrol-2(1H)-ylidene)acetonitrile 1a and its derivatives 1b-d. Silica gel promoted quantitative conversion from stable intermediate to 1a within 30 min at room temperature. Finally, four chemical σ bonds and two chiral carbons with high diastereoselectivity were achieved. Compound 1a can act as a novel high selective UV-vis and fluorescence "turn-on" probe for Zn²⁺ and Cd²⁺, respond to proton, and show dual-state emission (DSE) characteristics.

Stabilization of ruthenium on biochar-nickel magnetic nanoparticles as a heterogeneous, practical, selective, and reusable nanocatalyst for the Suzuki C-C coupling reaction in water

Waste recycling and the use of recyclable and available catalysts are important principles in green chemistry in science and industrial research. Therefore in this study, biochar nanoparticles were prepared from biomass pyrolysis. Then, they were magnetized with nickel nanoparticles to improve their recycling. Further, the magnetic biochar nanoparticles (biochar-Ni MNPs) were modified by dithizone ligand and then applied for the fabrication of a ruthenium catalyst (Ru-dithizone@biochar-Ni MNPs). This nanocatalyst was characterized by high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), wavelength dispersive X-ray spectroscopy (WDX), N2 adsorption-desorption isotherms, thermogravimetric analysis (TGA), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM) techniques. The XRD studies of Ru in the nanocatalyst showed that the crystalline structure of ruthenium in the Ru-dithizone@biochar-Ni MNPs was hcp. Another principle of green chemistry is the use of safe and inexpensive solvents, the most suitable of which is water. Therefore, the catalytic activity of this catalyst was investigated as a practical, selective, and recyclable nanocatalyst in the Suzuki carbon-carbon coupling reaction in aqueous media. The VSM curve of this catalyst showed that it could be easily recovered using an external magnet, and recycled multiple times. Also, VSM analysis of the recovered catalyst indicated the good magnetic stability of this catalyst after repeated use.

Xylooligosaccharides Production from Xylan Hydrolysis Using Recyclable Strong Acidic Cationic Exchange Resin as Solid Acid Catalyst

As the emerging functional food additives, xylooligosaccharides are receiving high commercial interest due to their excellent gut microbiota modulation capacity, and accumulating studies have suggested that acidic hydrolysis for xylooligosaccharides preparation is the most convenient and cost-effective approach, whereas liquid acids are still limited due to the challenges in acid catalysts separation and products recovery. In the present study, a strong acidic cationic resin (NKC-9), as a recyclable solid acid catalyst, was successfully applied to xylooligosaccharides production by acidic hydrolysis of xylan. Additionally, a central composite design with response surface methodology was employed to optimize the conditions for maximizing xylooligosaccharides yields. The results suggested that xylooligosaccharides with the desired degree of polymerization (2-6) could be prepared, and the maximum yield was reached 47.7% in the case of 5% solid acid loading at 131 °C for 42 min. Finally, the recyclability of the solid acid catalysts confirmed that it was a cost-effective strategy for xylooligosaccharides production.

Experimental and theoretical study of ZrMo-KIT-6 solid acid catalyst with abundant Brønsted acid sites

Given their excellent reusability and environmental friendliness, solid acid catalysts have drawn considerable attention in acid-catalyzed reactions. However, the rational design and synthesis of solid acid catalysts with abundant Brønsted acid sites remains a challenge. In this paper, KIT-6, Zr-KIT-6, Mo-KIT-6, and ZrMo-KIT-6 solid acid catalysts are designed and synthesized. The textural properties, chemical bonds, and acidic properties of these catalysts are explored. Theoretical calculations are conducted to explore the formation mechanism of Brønsted acid sites. The theoretical trend of acidity is consistent with the experimental result of acidity and further demonstrates that the synergistic effect of Zr and Mo species improves the formation of Brønsted acid sites. The as-obtained ZrMo-KIT-6 solid acid catalysts are employed in Friedel–Crafts benzylation reaction, and the outstanding catalytic performance of the ZrMo-KIT-6 catalyst indicates that it is an excellent Brønsted solid acid catalyst.

Synergistic effect of Zr and Mo species in the formation of Brønsted acid sites is investigated by experimental and theoretical study.

Synthesis of hierarchical nanocrystalline β zeolite as efficient catalyst for alkylation of benzene with benzyl alcohol

To develop an efficient solid acid catalysts for the Friedel–Crafts alkylation reaction, especially for involving bulky molecules, the direct synthesis of hierarchical nanocrystalline β zeolites were achieved by using amphiphilic organosilane ([(CH₃O)₃SiC₃H₆N(CH₃)₂C₁₈H₃₇]Cl, TPOAC) as collaborative structure-directing agent (SDA). The growth evolution of β crystals and the influence of TPOAC/SiO₂ molar ratio on the mesoporous structure, crystal size, and acidic properties of β zeolites were investigated and discussed in detail. The characterization results reveal that intracrystalline mesopores and intercrystalline mesopores/macropores via the stacking of β nanocrystals were generated over the hierarchical β zeolites. Moreover, most of the strong acid sites were well remained compared with the conventional microporous β zeolite. Consequently, the hierarchical nanocrystalline β zeolite synthesized under the optimized synthesis conditions shows improved specific catalytic activity of acid sites (turnover number, TON) in alkylation of benzene with benzyl alcohol, which can be attributed to the integrated balance of considerable mesoporosity, accessibility of the acid sites, and well-remained strong acid sites in the hierarchical β zeolite.

Hierarchical β zeolite with enhanced transport and specific catalytic activity of acid sites in Friedel–Crafts alkylation was achieved by using amphiphilic organosilane surfactant as mesopores-directing agent and crystal growth inhibitor.

Basicity of Isostructural Porous Ionic Crystals Composed of Nb/Ta-Substituted Keggin-Type Polyoxotungstates

Three isostructural porous ionic crystals (PICs) based on Keggin-type POMs with different compositions but equal negative charge ([BW12O40]5– (BW12), [SiW11NbO40]5– (SiW11Nb), and [SiW11TaO40]5– (SiW11Ta)) are synthesized. Experimental and theoretical characterizations...

Valorisation of corncob into furfuryl alcohol and furoic acid via chemoenzymatic cascade catalysis

Heterogeneous tin-based sulfonated graphite (Sn-GP) catalyst was prepared with graphite as carrier. The physicochemical properties of Sn-GP were captured by FT-IR, XRD, SEM and BET. Organic acids with different pKa values were used to assist Sn-GP for transforming corncob (CC), and a linear equation (Furfural yield  = - 7.563 ×  pKa  + 64.383) (R2  =  0.9348) was fitted in acidic condition. Using sugarcane bagasse, reed leaf, chestnut shell, sunflower stalk and CC as feedstocks, co-catalysis of CC (75.0 g/L) with maleic acid (pKa  =  1.92) (0.5 wt%) and Sn-GP (3.6 wt%) yielded the highest furfural yield (47.3%) for 0.5 h at 170 °C. An effective furfural synthesis was conducted via co-catalysis with Sn-GP and maleic acid. Subsequently, E. coli CG-19 and TS completely catalyzed the conversion of corncob-derived FAL to furfurylalcohol and furoic acid, respectively. Valorisation of available renewable biomass to furans was successfully developed in tandem chemoenzymatic reaction.

Cesium salt of 2-molybdo-10-tungstophosphoric acid as an efficient and reusable catalyst for the synthesis of uracil derivatives via a green route

A solid catalyst, cesium salt of 2-molybdo-10-tungstophosphoric acid (Cs_2.3H_0.7PW₁₀Mo₂O₄₀) named as Cs-3, was synthesized by a simple, cheap, clean, and eco-friendly method. The physicochemical properties of the synthesized catalyst were studied via FTIR spectroscopy, XRD, EDX, ICP-AES, SEM-TEM, and BET techniques. The precursor 2-molybdo-10-tungstophosphoric acid (H₃PW₁₀Mo₂O₄₀) was easily soluble in water and other polar solvents. Moreover, their cesium salts Cs _x H_3-x PW₁₀Mo₂ with Cs content in the range x = 2.0-2.5 were insoluble in water and other polar solvents. The surface area of the precursor (5.483 m² g^-1) increased after partial proton exchange by Cs⁺ ions (111.732 m² g^-1), and all samples with x > 1 were resistant to leaching of active components and can be recycled without obvious loss of activity. This catalyst used for the synthesis of uracil derivatives via a green route under solvent free conditions at 70 °C gives higher yield within a shorter reaction time. The catalyst was found to be more active and reusable over nine runs with a negligible loss of activity.