Decomposition of acetaminophen (Ace) using TiO2/UVA/LED system

A review on led technology in water photodisinfection

The increase in efficiency achieved by UV LED devices has led to a compelling increase in research reports on UV LED water treatment for consumption in the past few years. This paper presents an in-depth review based on recent studies on the suitability and performance of UV LED-driven processes for water disinfection. The effect of different UV wavelengths and their combinations was analysed for the inactivation of various microorganisms and the inhibition of repair mechanisms. Whereas 265 nm UVC LED present a higher DNA damaging potential, 280 nm radiation is reported to repress photoreactivation and dark repair. No synergistic effects have been proved to exist when coupling UVB + UVC whereas sequential UVA-UVC radiation seemed to enhance inactivation. Benefits of pulsed over continuous radiation in terms of germicidal effects and energy consumption were also analysed, but with inconclusive results. However, pulsed radiation may be promising for improving thermal management. As a challenge, the use of UV LED sources introduces significant inhomogeneities in the light distribution, pushing for the development of adequate simulation methods to ensure that the minimum target dose required for the target microbes is achieved. Concerning energy consumption, selecting the optimal wavelength of the UV LED needs a compromise between the quantum efficiency of the process and the electricity-to-photon conversion. The expected development of the UV LED industry in the next few years points to UVC LED as a promising technology for water disinfection at a large scale that could be competitive in the market in the near future.

Performance of TiO2/UV-LED-Based Processes for Degradation of Pharmaceuticals: Effect of Matrix Composition and Process Variables

Ultra-violet light-emitting diode (UV-LED)-based processes for water treatment have shown the potential to surpass the hurdles that prevent the adoption of photocatalysis at a large scale due to UV-LEDs' unique features and design flexibility. In this work, the degradation of five EU Watch List 2020/1161 pharmaceutical compounds was comprehensively investigated. Initially, the UV-A and UV-C photolytic and photocatalytic degradation of individual compounds and their mixtures were explored. A design of experiments (DoE) approach was used to quantify the effects of numerous variables on the compounds' degradation rate constant, total organic carbon abatement, and toxicity. The reaction mechanisms of UV-A photocatalysis were investigated by adding different radical scavengers to the mix. The influence of the initial pH was tested and a second DoE helped evaluate the impact of matrix constituents on degradation rates during UV-A photocatalysis. The results showed that each compound had widely different responses to each treatment/scenario, meaning that the optimized design will depend on matrix composition, target pollutant reactivity, and required effluent standards. Each situation should be analyzed individually with care. The levels of the electrical energy per order are still unfeasible for practical applications, but LEDs of lower wavelengths (UV-C) are now approaching UV-A performance levels.

Supported TiO2 in Ceramic Materials for the Photocatalytic Degradation of Contaminants of Emerging Concern in Liquid Effluents: A Review

The application of TiO₂ as a slurry catalyst for the degradation of contaminants of emerging concern (CEC) in liquid effluents has some drawbacks due to the difficulties in the catalyst reutilization. Thus, sophisticated and expensive separation methods are required after the reaction step. Alternatively, several types of materials have been used to support powder catalysts, so that fixed or fluidized bed reactors may be used. In this context, the objective of this work is to systematize and analyze the results of research inherent to the application of ceramic materials as support of TiO₂ in the photocatalytic CEC removal from liquid effluents. Firstly, an overview is given about the treatment processes able to degrade CEC. In particular, the photocatalysts supported in ceramic materials are analyzed, namely the immobilization techniques applied to support TiO₂ in these materials. Finally, a critical review of the literature dedicated to photocatalysis with supported TiO₂ is presented, where the performance of the catalyst is considered as well as the main drivers and barriers for implementing this process. A focal point in the future is to investigate the possibility of depurating effluents and promote water reuse in safe conditions, and the supported TiO₂ in ceramic materials may play a role in this scope.

State-of-the-art and current challenges for TiO2/UV-LED photocatalytic degradation of emerging organic micropollutants

The development of ultraviolet light-emitting diodes (UV-LED) opens new possibilities for water treatment and photoreactor design. TiO₂ photocatalysis, a technology that has been continuously drawing attention, can potentially benefit from LEDs to become a sustainable alternative for the abatement of organic micropollutants (OMPs). Recently reported data on photocatalytic degradation of OMPs and their parameters of influence are here critically evaluated. The literature on OMP degradation in real water matrices, and at environmentally relevant concentrations, is largely missing, as well as the investigations of the impact of photoreactor design in pollutant degradation kinetics. The key factors for reducing UV-LED treatment technology costs are pointed out, like the increase in external quantum and wall-plug efficiencies of UV-LEDs compared to other technologies, as well as the need for an appropriate design optimizing light homogeneity in the reactor. Controlled periodic illumination, wavelength coupling and H₂O₂ addition are presented as efficiency enhancement options. Although electrical energy per order (E_EO) values for UV-LED photocatalysis have decreased to the range of traditional mercury lamps, values are still not low enough for practical employment. Moreover, due to the adoption of high initial OMP concentration in most experiments, it is likely that most literature E_EO values are overestimated. Given the process characteristics, which are favoured by translucent matrices and small diameters for more homogenous light distribution and better transportation of radicals, innovative reactor designs should explore the potential of point-of-use applications to increase photocatalysis applicability at large scale.

Heterogeneous photocatalytic degradation of pharmaceuticals in synthetic and real matrices using a tube-in-tube membrane reactor with radial addition of H2O2

A tube-in-tube membrane reactor, with radial addition of hydrogen peroxide, was used for the oxidation of four pharmaceuticals, paracetamol (PCT), furosemide (FRS), nimesulide (NMD), and diazepam (DZP), in a continuous-mode operation, using photochemical and photocatalytic processes, driven by UVA or UVC photons. This reactor allows a controlled titration of small H₂O₂ doses (inside-out mode) to the catalyst particles immobilized in the membrane shell side and to the annular space between the membrane inner tubing and the concentric outer quartz tubing, where water to be treated flows. Tests were performed using synthetic (SWW) and real (urban wastewater after secondary treatment) (UWW) matrices, both spiked with the pharmaceutical mix solution (200 μg L^-1 of each). The photochemical and photocatalytic oxidation efficiency was evaluated as a function of H₂O₂ dose (5-20 mg L^-1), oxidant injection mode (radial permeation vs injection upstream from the reactor inlet), light source (UVA vs UVC lamps) and aqueous matrix (synthetic vs real matrix). At steady-state regime, the UVC/H₂O₂/TiO₂ system, with radial H₂O₂ addition (20 mg L^-1), showed the highest pharmaceuticals removal percentage, PCT (27.4%), FRS (35.0%), NMD (24.2%) and DZP (30.0%) in SWW. A substantial decrease in pharmaceuticals elimination was observed for UWW (PCT - 11.5%, FRS - 20.3%, NMD - 8.2% and DZP - 12.6%), in comparison with the SWW matrix. Finally, twelve transformation products (TPs) were identified; most of them showed in their structures hydroxylation in aromatic moiety; all TPs chemical structures were evaluated by BIOWIN software indicating that the TPs are non-biodegradables.

Mitigation of environmentally-related hazardous pollutants from water matrices using nanostructured materials - A review

An unprecedented rise in population growth and rapid worldwide industrial development are associated with the increasing discharge of a range of toxic and baleful compounds. These toxic pollutants including dyes, endocrine-disrupters, heavy metals, personal care products, and pharmaceuticals are destructing nature's balance and intensifying environmental toxicity at a disquieting rate. Therefore, finding better, novel and more environmentally sound approaches for wastewater remediation are of great importance. Nanoscale materials have opened up some new horizons in various fields of science and technology. Among a range of treatment technologies, nanostructured materials have recently received incredible interest as an emerging platform for wastewater remediation owing to their exceptional surface-area-to-volume ratio, unique electrical and chemical properties, quantum size effects, high scalability, and tunable surface functionalities. An array of nanomaterials including noble metal-based nanostructures, transition metal oxide nanomaterials, carbon-based nanomaterials, carbon nanotubes, and graphene/graphene oxide nanomaterials to their novel nanocomposites and nanoconjugates have been attempted as the promising catalysts to overcome environmental dilemmas. In this review, we summarized recent advances in nanostructured materials that are particularly engineered for the remediation of environmental contaminants. The toxicity of various classes of relevant tailored nanomaterials towards human health and the ecosystem along with perspectives is also presented. In our opinion, an overview of the up-to-date advancements on this emerging topic may provide new ideas and thoughts for engineering low-cost and highly-efficient nanostructured materials for the abatement of recalcitrant pollutants for a sustainable environment.

Electrochemical oxidation of acetaminophen and its transformation products in surface water: effect of pH and current density

Several studies have been conducted worldwide to develop effective and affordable methods to degrade pharmaceuticals and their metabolites/intermediates/oxidation products found in surface water, wastewater and drinking water. In this work, acetaminophen and its transformation products were successfully degraded in surface water by electrochemical oxidation using stainless steel electrodes. The effect of pH and current density on the oxidation process was assessed and the oxidation kinetics and mechanisms involved were described. Additionally, the results were compared with those obtained in acetaminophen synthetic solutions. It was found that conducting the electrochemical oxidation at 16.3 mA/cm² and pH 5, good performance of the process was achieved and not only acetaminophen, but also its transformation products were totally degraded in only 7.5 min; furthermore, small number of transformation products were generated. On the other hand, degradation rates of acetaminophen and its transformation products in surface water were much faster (more than 2.5 times) and the reaction times much shorter (more than 4.0 times) than in synthetic solutions at all current densities and pH values evaluated. At pH 3 and pH 5, greater soluble chlorine formation due to the higher HCl amount used to acidify the surface water solutions could enhance the degradation rates of acetaminophen and its transformation products. However, constituents of surface water (ions and solids) could also have an important role on the oxidation process because at pH 9 (non-acidified solutions) the degradation rates were also much greater and the reaction times were much shorter in surface water than in acetaminophen synthetic solutions.

Acetaminophen micropollutant: Historical and current occurrences, toxicity, removal strategies and transformation pathways in different environments

Acetaminophen (ACT) is commonly used as a counter painkiller and nowadays, it is increasingly present in the natural water environment. Although its concentrations are usually at the ppt to ppm levels, ACT can transform into various intermediates depending on the environmental conditions. Due to the complexity of the ACT degradation products and the intermediates, it poses a major challenge for monitoring, detection and to propose adequate treatment technologies. The main objectives of this review study were to assess (i) the occurrences and toxicities, (2) the removal technologies and (3) the transformation pathways and intermediates of ACT in four environmental compartments namely wastewater, surface water, ground water, and soil/sediments. Based on the review, it was observed that the ACT concentrations in wastewater can reach up to several hundreds of ppb. Amongst the different countries, China and the USA showed the highest ACT concentration in wastewater (≤300 μg/L), with a very high detection frequency (81-100%). Concerning surface water, the ACT concentrations were found to be at the ppt level. Some regions in France, Spain, Germany, Korea, USA, and UK comply with the recommended ACT concentration for drinking water (71 ng/L). Notably, ACT can transform and degrade into various metabolites such as aromatic derivatives or organic acids. Some of them (e.g., hydroquinone and benzoquinone) are toxic to human and other life forms. Thus, in water and wastewater treatment plants, tertiary treatment systems such as advanced oxidation, membrane separation, and hybrid processes should be used to remove the toxic metabolites of ACT.

Recent advances in application of UV light-emitting diodes for degrading organic pollutants in water through advanced oxidation processes: A review

Over the last decade, ultraviolet light-emitting diodes (UV LEDs) have attracted considerable attention as alternative mercury-free UV sources for water treatment purposes. This review is a comprehensive analysis of data reported in recent years (mostly, post 2014) on the application of UV LED-induced advanced oxidation processes (AOPs) to degrade organic pollutants, primarily dyes, phenols, pharmaceuticals, insecticides, estrogens and cyanotoxins, in aqueous media. Heterogeneous TiO₂-based photocatalysis in lab grade water using UVA LEDs is the most frequently applied method for treating organic contaminants. The effects of controlled periodic illumination, different TiO₂-based nanostructures and reactor types on degradation kinetics and mineralization are discussed. UVB and UVC LEDs have been used for photo-Fenton, photo-Fenton-like and UV/H₂O₂ treatment of pollutants, primarily, in model aqueous solutions. Notably, UV LED-activated persulfate/peroxymonosulfate processes were capable of providing degradation in DOC-containing waters. Wall-plug efficiency, energy-efficiency of UV LEDs and the energy requirements in terms of Electrical Energy per Order (E_EO) are discussed and compared. Despite the overall high degradation efficiency of the UV LED-based AOPs, practical implementation is still limited and at lab scale. More research on real water matrices at more environmentally relevant concentrations, as well as an estimation of energy requirements providing fluence-based kinetic data are required.

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the "zero concept" of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.