Porous structured CuO-CeO2 nanospheres for the direct oxidation of cellobiose and glucose to gluconic acid

Nanomaterials with Glucose Oxidase-Mimicking Activity for Biomedical Applications

Glucose oxidase (GOD) is an oxidoreductase that catalyzes the aerobic oxidation of glucose into hydrogen peroxide (H₂O₂) and gluconic acid, which has been widely used in industrial raw materials production, biosensors and cancer treatment. However, natural GOD bears intrinsic disadvantages, such as poor stability and a complex purification process, which undoubtedly restricts its biomedical applications. Fortunately, several artificial nanomaterials have been recently discovered with a GOD-like activity and their catalytic efficiency toward glucose oxidation can be finely optimized for diverse biomedical applications in biosensing and disease treatments. In view of the notable progress of GOD-mimicking nanozymes, this review systematically summarizes the representative GOD-mimicking nanomaterials for the first time and depicts their proposed catalytic mechanisms. We then introduce the efficient modulation strategy to improve the catalytic activity of existing GOD-mimicking nanomaterials. Finally, the potential biomedical applications in glucose detection, DNA bioanalysis and cancer treatment are highlighted. We believe that the development of nanomaterials with a GOD-like activity will expand the application range of GOD-based systems and lead to new opportunities of GOD-mimicking nanomaterials for various biomedical applications.

The effect of AgNPS bio-functionalization on the cytotoxicity of the yeast Saccharomyces cerevisiae

This work used Sedum praealtum leaf extract to synthesize silver nanoparticles (AgNPs) in a single step. The cytotoxicity of AgNPs was studied with the yeast Saccharomyces cerevisiae W303-1. In addition, the antioxidant activity of the DPPH radical was studied both in the extract of S. praealtum and in the AgNPs. UV-Vis spectroscopy determined the presence of AgNPs by the location of the surface plasmon resonance (SPR) band at 434 nm. TEM and XRD analyzes show AgNPs with fcc structure and hemispherical morphology. Also, AgNPs range in size from 5 to 25 nm and have an average size of 14 nm. 1H NMR, FTIR, and UV-Vis spectroscopy techniques agreed that glycosidic compounds were the main phytochemical components responsible for the reduction and stabilization of AgNPs. In addition, AgNPs presented a maximum of 12% toxicity in yeast attributed to the generation of ROS. Consequently, there was low bioactivity because glycoside compounds cover the biosynthesized AgNPs from S. praealtum. These findings allow applications of AgNPs involving contact with mammals and higher organisms.

Chemocatalytic value addition of glucose without carbon-carbon bond cleavage/formation reactions: an overview

As the monomeric unit of the abundant biopolymer cellulose, glucose is considered a sustainable feedstock for producing carbon-based transportation fuels, chemicals, and polymers. The chemocatalytic value addition of glucose can be broadly classified into those involving C-C bond cleavage/formation reactions and those without. The C6 products obtained from glucose are particularly satisfying because their syntheses enjoy a 100% carbon economy. Although multiple derivatives of glucose retaining all six carbon atoms in their moiety are well-documented, they are somewhat dispersed in the literature and never delineated coherently from the perspective of their carbon skeleton. The glucose-derived chemical intermediates discussed in this review include polyols like sorbitol and sorbitan, diols like isosorbide, furanic compounds like 5-(hydroxymethyl)furfural, and carboxylic acids like gluconic acid. Recent advances in producing the intermediates mentioned above from glucose following chemocatalytic routes have been elaborated, and their derivative chemistry highlighted. This review aims to comprehensively understand the prospects and challenges associated with the catalytic synthesis of C6 molecules from glucose.

Combustion-Synthesized Porous CuO-CeO2-SiO2 Composites as Solid Catalysts for the Alkenylation of C(sp3)-H Bonds Adjacent to a Heteroatom via Cross-Dehydrogenative Coupling

A series of mixed oxides of CuO, CeO2, and SiO2 were prepared by gel combustion and employed for the first time as efficient solid catalysts in a solvent-less liquid-phase cross-dehydrogenative coupling. The facile one-pot catalyst synthesis resulted in highly porous materials presenting large specific surface areas and strong metal–support interactions. The interaction with highly dispersed CeO2 enhanced the redox properties of the CuO species. The CuO-CeO2-SiO2 composites exhibited excellent catalytic performance for the selective coupling between 1,1-diphenylethylene and tetrahydrofuran with a yield up to 85% of 2-(2,2-diphenylvinyl)-tetrahydrofuran in the presence of di-tert-butyl peroxide (DTPB) and KI. Albeit both CuO and CeO2 species are proved to be responsible for the catalytic conversion, a great synergistic improvement in the catalytic activity was obtained by extended contact between the oxide phases by high porosity in comparison with the reactions using individual Cu or Ce catalysts. The activity of the composite catalyst was shown to be highly stable after five successive reaction cycles. Furthermore, the study scope was extended to the synthesis of different derivatives via composite-catalyzed coupling of C(sp2)-H with C(sp3-H) adjacent to a heteroatom. The good yields recorded proved the general validity of this composite for the cross-dehydrogenative coupling reaction rarely performed on solid catalysts.

Enhanced Photocatalytic Degradation of Antibiotic and Hydrogen Production by Iron Doped Cerium(IV) Oxide

Norfloxacin (NF) is an emerging antibiotic contaminant due to its significant accumulation in the environment. Photocatalytic degradation is an effective method for removing emerging contaminant compounds in aqueous solution; however, it is not commonly applied because of the poor solubility of contaminant compounds in water. In this study, a photocatalytic degradation experiment was carried out on NF using a self-made ceria catalyst. At an initial concentration of NF of 2.5 mg L^-1, the dosage of CeO₂ was 0.1 g L^-1 photocatalyst in water, and the initial pH of the NF solution was 8.0. With a reaction time of 180 min, the total removal rate of NF could reach 95%. Additionally, the studies on hydrogen production show that the maximum hydrogen production with 2% Fe-CeO₂ can reach 25,670 μmol h^-1 g^-1 under close to 8 W of 365 nm, a methanol concentration of 20%, and a catalyst dose of 0.1 g L^-1 photocatalyst in water. Furthermore, the intensities of photoluminescence (PL) emission peaks decreased with increased Fe-doped amounts on CeO₂, suggesting that the irradiative recombination seemed to be weakened.

Mild and selective hydrogenation of CO2 into formic acid over electron-rich MoC nanocatalysts

The direct hydrogenation of CO₂ using H₂ gas is a one-stone-two-birds route to produce highly value-added hydrocarbon compounds and to lower the CO₂ level in the atmosphere. However, the transformation of CO₂ and H₂ into hydrocarbons has always been a great challenge while ensuring both the activity and selectivity over abundant-element-based nanocatalysts. In this work, we designed a Schottky heterojunction composed of electron-rich MoC nanoparticles embedded inside an optimized nitrogen-doped carbon support (MoC@NC) as the first example of noble-metal-free heterogeneous catalysts to boost the activity of and specific selectivity for CO₂ hydrogenation to formic acid (FA) in liquid phase under mild conditions (2 MPa pressure and 70 °C). The MoC@NC catalyst with a high turnover frequency (TOF) of 8.20 mol_FA mol_MoC^-1 h^-1 at 140 °C and an excellent reusability are more favorable for real applications.

Effect of Cu(II) on adsorption of tetracycline by natural zeolite: performance and mechanism

The purpose of this study was to investigate the effect of Cu(II) on the adsorption performance and mechanism of tetracycline (TC) adsorption by natural zeolite (NZ) in aqueous solution. Low levels of Cu(II) (<0.01 mmol/L) enhanced the extent of TC adsorption from ∼0.4 mg/g (in the absence of Cu(II)) to ∼0.5 mg/g (with 0.01 mmol/L Cu(II)), resulting in 99% removal of the total TC content. The TC adsorption gradually decreased with increase in the initial pH, but the coexistence of Cu(II) lowered the extent of decrease. The adsorption process was better simulated by the pseudo-second-order kinetics model, but the isotherm model that was more fitting changed from the Langmuir to the Freundlich model as Cu(II) increased, indicating the coexistence of Cu(II) and TC altered the adsorption mechanisms. However, the residual TC in solution increased from 0 to ∼6 mg/L as the concentration of Cu(II) increased from 0 to 1 mmol/L, suggesting a competition between TC and Cu(II) for the adsorption sites in NZ. Fourier transform infrared spectroscopy analysis showed that the functional groups on the surface of NZ changed after the adsorption of TC, suggesting that complex reactions had occurred on the surface of the adsorbent.

Interface Engineering of Graphene-Supported Cu Nanoparticles Encapsulated by Mesoporous Silica for Size-Dependent Catalytic Oxidative Coupling of Aromatic Amines

In this study, graphene nanosheet-supported ultrafine Cu nanoparticles (NPs) encapsulated with thin mesoporous silica (Cu-GO@m-SiO₂) materials are fabricated with particle sizes ranging from 60 to 7.8 nm and are systematically investigated for the oxidative coupling of amines to produce biologically and pharmaceutically important imine derivatives. Catalytic activity remarkably increased from 76.5% conversion of benzyl amine for 60 nm NPs to 99.3% conversion and exclusive selectivity of N-benzylidene-1-phenylmethanamine for 7.8 nm NPs. The superior catalytic performance along with the outstanding catalyst stability of newly designed catalysts are attributed to the easy diffusion of organic molecules through the porous channel of mesoporous SiO₂ layers, which not only restricts the restacking of the graphene nanosheets but also prevents the sintering and leaching of metal NPs to an extreme extent through the nanoconfinement effect. Density functional theory calculations were performed to shed light on the reaction mechanism and to give insight into the trend of catalytic activity observed. The computed activation barriers of all elementary steps are very high on terrace Cu(111) sites, which dominate the large-sized Cu NPs, but are significantly lower on step sites, which are presented in higher density on smaller-sized Cu NPs and could explain the higher activity of smaller Cu-GO@m-SiO₂ samples. In particular, the activation barrier for the elementary coupling reaction is reduced from 139 kJ/mol on flat terrace Cu(111) sites to the feasible value of 94 kJ/mol at step sites, demonstrating the crucial role of the step site in facilitating the formation of secondary imine products.